Local Guide · AC and heating · Dallas, TX
What should Dallas homeowners know before hiring an AC and heating contractor?
Dallas gets more than 100 days of 90-degree heat and real winter cold. Here is what that means for your system, and how the city's mechanical permit works.
Dallas averages about 106 days a year at 90 degrees or hotter, but it also logs about 29 freezing nights a year, so the heating side of the system gets real use. In Dallas, a mechanical permit to install or replace HVAC must be pulled by a registered air conditioning contractor through the city's DallasNow system. Verify the contractor's TDLR license first.
Who licenses ac and heating providers
Texas Department of Licensing and Regulation (TDLR). A TDLR Air Conditioning and Refrigeration Contractor license is required statewide. The City of Dallas says its mechanical (HVAC) trade permit must be pulled by a registered air conditioning contractor who is also registered in DallasNow, and the residential record type is "Residential Mechanical Permit."
Check a license →Key facts for Dallas, TX
- Dallas-Fort Worth International Airport averages 106.3 days a year at or above 90 degrees, based on 1991 to 2020 normals.
- DFW averages 29.2 nights a year at or below freezing, based on 1991 to 2020 normals.
- DFW's normal heating degree days total 2,218 a year, compared with 2,825 cooling degree days.
- DFW's record high in its normals table is 113 degrees, set in June 1980.
- During the February 2021 storm, DFW fell to minus 2 degrees on February 16 and stayed at or below freezing for 139 straight hours, according to NWS Fort Worth.
- In 2023, DFW logged 124 days at 90 degrees or hotter, above its normal of 106.3.
- Dallas's mechanical trade permit covers installing, replacing or modifying heating, ventilation and air conditioning systems.
Why do Dallas homes need strong heating as well as cooling?
NOAA's 1991 to 2020 normals for DFW Airport show summer highs averaging 95.6 degrees in July and 95.8 in August, with 106.3 days a year at 90 or hotter. The station's record is 113 degrees, set in June 1980.
Winter counts too. DFW averages 29.2 nights a year at or below freezing. Its normal heating degree days total 2,218 a year, against 2,825 cooling degree days.
The February 2021 storm tested that. NWS Fort Worth says DFW reached minus 2 degrees on February 16, 2021. It stayed at or below freezing for 93 hours, rose above freezing briefly on February 13, then held at or below freezing for another 139 hours. Official snowfall for the event at DFW was 5.0 inches.
What permit do you need for HVAC work in Dallas?
The City of Dallas trade permit guide says a mechanical permit covers installing, replacing or modifying heating, ventilation and air conditioning systems. A registered air conditioning contractor must pull it, and that contractor must be registered in DallasNow. The residential record type is "Residential Mechanical Permit."
Dallas Development Services also publishes a mechanical permit application checklist covering air handlers, furnaces, condensers, heat pumps and other equipment. The department is at 320 E. Jefferson Blvd. and can be reached at 214-948-4480.
Ask your contractor to confirm the permit number before the old unit comes out.
What should a Dallas contractor check on a heating system?
ENERGY STAR recommends a pre-season check. For heating, its checklist has the contractor check gas or oil connections, gas pressure, burner combustion and the heat exchanger, and confirm the system's controls work safely.
If your home has gas heat, CPSC recommends battery-operated or battery-backup carbon monoxide alarms on every level and outside sleeping areas. With nearly 30 freezing nights in a normal year, schedule the heating check in fall, before the first cold snap.
How to choose a provider in Dallas, TX
- Verify the contractor's TDLR license and endorsement before you sign.
- Confirm the contractor is registered in DallasNow and will pull the Residential Mechanical Permit.
- Ask for a fall heating inspection covering gas pressure, burner combustion and the heat exchanger.
- Ask how the contractor sized the system for both Dallas summers and freezes.
- Confirm any new split-system AC meets DOE's Southeast minimum of 14.3 SEER2 (under 45,000 Btu/h).
- Install CO alarms on every level if you have gas heat.
- Make sure the proposal lists model numbers, the license number and warranty terms.
Questions people ask
Do I need a permit to replace my AC or furnace in Dallas?
The City of Dallas says its mechanical trade permit covers installing, replacing or modifying HVAC systems. A registered air conditioning contractor registered in DallasNow must pull it.
How cold does Dallas get?
NOAA's normals show DFW averaging 29.2 nights a year at or below freezing. In February 2021, NWS Fort Worth recorded minus 2 degrees at DFW on February 16.
How hot does Dallas get?
DFW averages 106.3 days a year at 90 degrees or hotter, and its record high is 113 degrees from June 1980. In 2023 it logged 124 days at 90 or above.
When should I have my heating checked in Dallas?
ENERGY STAR recommends pre-season check-ups, with heating serviced before cold weather. Given DFW's normal of about 29 freezing nights, fall is the time.
Who do I contact about a Dallas mechanical permit?
Dallas Development Services at 320 E. Jefferson Blvd., 214-948-4480.
How do I verify a Dallas AC contractor's license?
Search TDLR's License Data Search by name, license number or city. The license is issued by the state and is valid in every Texas city.
Sources
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


