Local Guide · Home alarm and security systems
How to Vet a Security Installer: A Checklist for Texas and Florida Homeowners
A neutral, step-by-step way to screen any alarm or security installer: license, insurance, written proposal, contract terms, red flags and a quote comparison table, tied to Texas and Florida law instead of sales claims.
Before you hire a security installer, verify the state license (Texas DPS or Florida DBPR), ask for proof of insurance, get at least three written proposals, and read the contract for term, price, renewal, equipment ownership and cancellation. In Texas you can demand a written contract within 7 days. Walk away if the installer pressures you or cannot show a license.
Key facts
- In Texas, a company that sells, installs, services, monitors or responds to alarm systems must hold a DPS security services contractor license (Occ. Code 1702.102, 1702.105), and employed installers and monitors need individual licenses (1702.221).
- In Florida, alarm contractors must be certified or registered by DBPR under Chapter 489 Part II, and unlicensed contracts are unenforceable by the contractor (489.531, 489.532).
- Texas licensed alarm companies must carry general liability insurance of at least $100,000 per occurrence for bodily injury and property damage, $50,000 per occurrence for personal injury and $200,000 aggregate, and a lapse suspends the license (1702.124, 1702.123).
- A Texas alarm company must tell you that you are entitled to a written contract and furnish it within 7 days of your request, dated and signed by the owner, manager or an authorized person (1702.288).
- On installation or activation, a Texas alarm company must give the occupant written information on false alarm law, preventing false alarms and operating the system (1702.286).
- Texas bars installing, on or after January 1, 2007, any control panel that does not meet or exceed ANSI false alarm reduction standards (1702.287).
- Florida licensed contractors must state their license number in offers of services, proposals and advertisements, with limited alarm-ad exceptions (489.521(7)).
- The FTC says to get references and written estimates from several companies, confirm who installs and monitors, the cost and billing frequency, and make sure the written contract includes every oral promise.
- Florida's auto-renewal law (501.165) requires clear disclosure of automatic renewal in service contracts and, for contracts of 12 months or more, notice 30 to 60 days before the cancellation deadline.
Step 1: Confirm the license before anything else
A license is the cheapest, fastest screen. It takes a few minutes online, and it filters out the riskiest options.
Texas
- The company must hold a security services contractor license from the Texas Department of Public Safety (DPS). Texas law says a person may not act as, or offer the services of, an alarm systems company without one (Occ. Code 1702.102). "Alarm systems company" means selling, installing, servicing, monitoring or responding to an alarm system (1702.105).
- Individuals who install or monitor must hold an individual license and be employed by a licensed company. An owner of 51 percent or more of a licensed company also needs an individual license (1702.221).
- Use the DPS Texas Online Private Security (TOPS) public search to look up individuals and businesses by type, including Alarm.
Florida
- The contractor must be certified or registered by the Department of Business and Professional Regulation. Use MyFloridaLicense.com, Verify A License.
- Check the class: Alarm System Contractor I (all types, including fire), II (all types other than fire), or a registered class limited to the cities or counties of registration.
The detailed steps are in how to check an alarm company license. For what the licenses mean, see Texas licensing and Florida licensing.
Exceptions you should know
Texas does not apply Chapter 1702 to a person installing an alarm on their own property, to auto alarm sellers, or to a person selling alarm systems exclusively by e-commerce, over the counter or by mail order (1702.328). That is why do-it-yourself retail kits do not need a licensed seller. If someone installs for you in your home, treat the installer as a licensed professional you must verify.
Step 2: Check insurance and bonding
If an installer drills through a water line or a ladder falls on a car, you want the installer's insurance to pay, not your homeowners policy.
- Texas. A company license applicant must carry general liability insurance with minimum limits of $100,000 per occurrence for bodily injury and property damage, $50,000 per occurrence for personal injury and $200,000 aggregate (1702.124(c)). The license holder must keep its insurance certificate on file with DPS at all times. A lapse triggers immediate suspension, with 10 days to prove coverage to rescind it (1702.123). Fire alarm firms registered under Insurance Code ch. 6002 must carry general liability insurance with products and completed operations coverage of at least $100,000 per occurrence and $300,000 aggregate per policy year unless the commissioner changes the limits (6002.153).
- Florida. Counties and cities may require a bond of up to $5,000 per electrical contractor (489.537(3)). We did not find a statewide insurance minimum for alarm contractors in the sections loaded, so ask the contractor for a certificate of insurance and confirm any local requirement.
Ask for a certificate of insurance that lists your address as certificate holder if you want proof. Check that the policy is active and covers the work you are hiring them for. Your own homeowners insurance agent can tell you if more is needed. If you plan to ask your insurer for an alarm discount, see insurance discounts for home security systems.
Step 3: Ask the right questions
Use the same questions with every company. Write down the answers. A good installer will answer without hesitation.
About the company
- What is your full legal business name, address and state license number?
- Who will install the system, and are they your employee? Do they hold individual licenses (Texas)?
- Do you use subcontractors for installation or monitoring? In Texas, you must be told at negotiation that services may be subcontracted (1702.288).
- Who monitors the system, and where is the monitoring center?
- How long have you served my city?
About the system
- Which sensors, cameras and devices are in the proposal, by model?
- Does the system have a cellular communicator, and what is the backup if power or internet fails?
- Does the control panel meet the false alarm reduction standard? (Texas bans panels that do not meet ANSI false alarm reduction standards after January 1, 2007: 1702.287.)
- Can I use the equipment with another monitoring company later?
- Who owns the equipment?
About price and contract
- What is the total cost for equipment, installation, activation and permits?
- What is the monthly monitoring fee, and can it go up?
- How long is the contract, and does it auto-renew?
- What happens if I move or cancel?
- What fees apply for false alarms, relocation or service calls?
About service
- What is the warranty on equipment and labor, in writing?
- How do I request service and what is the response time?
- What training will I get on the system?
Texas and Florida statutes loaded for this guide do not set a minimum warranty length for alarm equipment, so the warranty is whatever the written contract says. Ask for it in writing.
Step 4: Get at least three written proposals
The FTC recommends getting references and written estimates from several companies, confirming who will install and monitor the system, the cost, and how often you will be billed. Use the same scope for each so you compare like with like.
What a written proposal should contain
- Company name, address, phone, email and license number (in Florida the number must be in each offer of services or proposal, with limited alarm-ad exceptions: 489.521(7)).
- Your name and the address where the work will happen.
- A list of every device, by type and quantity, and where each goes.
- The monitoring service level: type of communication, response procedure, who is on the call list.
- All fees: equipment, installation, activation, permits, taxes.
- Monthly fee, contract length, renewal terms and price change terms.
- Equipment ownership and warranty terms.
- Timeline: start, finish and who obtains permits or registrations.
- Cancellation, relocation and early termination terms.
- The date of the proposal and how long the price is valid.
Make sure every oral promise is in the writing. The FTC says to make sure the written contract includes everything the salesperson promised.
Quote comparison template
| Item | Company A | Company B | Company C |
|---|---|---|---|
| State license number and class (checked yes/no) | |||
| Insurance certificate received | |||
| Devices included (count and models) | |||
| Up-front cost (equipment, install, activation) | |||
| Monthly monitoring fee | |||
| Contract length in months | |||
| Auto-renewal terms | |||
| Total cost over contract term | |||
| Who owns the equipment | |||
| Warranty (equipment and labor) | |||
| Cancellation and relocation fees | |||
| Permit or city registration handled by | |||
| Communication path and backup |
To compute total cost, add up-front fees and the monthly fee multiplied by contract months. Compare that total, not just the monthly fee. For typical price discussions, see home security system cost in Texas and Florida.
Step 5: Read the contract line by line
The contract is where most problems start. Read it before you sign, and take your time.
What to look for
| Item | What to confirm | Law that helps |
|---|---|---|
| Written contract | Texas: you can ask for one and must get it within 7 days, dated and signed by an authorized person | Occ. Code 1702.288 |
| Term and renewal | Number of months, how it renews, the notice period to stop renewal | Florida 501.165 requires clear disclosure of auto renewals and notice 30 to 60 days before the deadline for contracts of 12 months or more |
| Monthly fee | Amount, due date, whether it can rise | Contract terms |
| Equipment ownership | Who owns it, whether you must return it, what a removal fee is | Contract terms |
| Cancellation | How, to whom, fees, whether you can cancel by the same method you used to sign | Florida 501.165(2) lets you cancel in the same manner and by the same means used to accept the contract |
| Assignment | Whether the company may sell your contract | Texas 1702.288(d)-(e): notice of sale within 7 days |
| Subcontracting | Whether installers or monitors are subcontractors | Texas 1702.288: you must be told at negotiation |
| Cooling-off rights | 3 business days for sales made at home | 16 CFR 429, Texas Bus. & Com. Code ch. 601, Florida 501.025 |
| Permits and registrations | Who files city alarm registration or permit | City ordinance |
| False alarm terms | Training provided, fees you may owe the city | Texas 1702.286 |
Texas installation paperwork
When the alarm is installed or activated, a Texas alarm company must give the occupant written information summarizing the false alarm law (including penalties and permit revocation), how to prevent false alarms, and how to operate the system. It must also notify the city of each installation or activation within 30 days, giving the company name, license number, occupant name, address and date (1702.286). A violation is a Class C misdemeanor.
Step 6: Check references, complaints and discipline
Do not rely on reviews alone. Use official records first.
- Texas. The DPS TOPS search shows licensed businesses and individuals. DPS handles complaints about licensed or unlicensed alarm companies under Occupations Code ch. 1702. Ask DPS about disciplinary history if you need more than the search shows. Public records requests go through the DPS Office of General Counsel.
- Florida. DBPR's license page for a contractor shows discipline and complaints, and 489.533 lists the grounds for discipline, including fraud, deceit, negligence, incompetency or misconduct, practicing on a suspended or inactive license, and abandoning a project.
- Attorney general and consumer agencies. The FTC says to check a company with your state attorney general, local consumer protection agency, any local business-rating group and state licensing officials. This guide relies on state agencies, and we could not load every agency page, so verify what each agency tracks.
- References. Ask for two or three recent customers in your city, with similar systems. Call them. Ask whether the installer showed up on time, cleaned up, explained the system and honored the bill.
- Local police or sheriff. City alarm units often keep registration records and may tell you how the system affects false alarm fees. See the city guides for Houston, Dallas, Miami and others.
Red flags that suggest a bad installer
- No license number. Or a number that does not match the name on the contract.
- Pressure. A deal that "ends today," or a refusal to leave when you say no.
- Claims about your current alarm company. The FTC lists false claims that your security company is out of business and phony upgrades as warning signs. See fake takeover calls and billing scams.
- "Free" equipment without a clear monthly cost. The FTC says free equipment may come with a long-term, expensive monitoring contract.
- Scare tactics. Crime claims you cannot verify.
- No written proposal. Or one that leaves out what was promised.
- Cash only or large up-front payment. Prefer payment by a traceable method in stages.
- Blank spaces in the contract. Never sign a contract with blanks.
- Unwillingness to give a copy. In Texas you have the right to a written contract.
- Refuses to put the warranty in writing.
- Advertises as an alarm contractor with no license number. In Florida, advertising as available to do alarm contracting without a license is itself prohibited (489.531(1)(b)).
See also door-to-door alarm sales and scams.
What if the installer is unlicensed?
- Stop before signing. If you have not signed, walk away.
- If you signed, check your cancellation rights. If the sale happened at your home, you may have 3 business days to cancel (16 CFR 429; Texas Bus. & Com. Code 601.051; Florida 501.025).
- In Florida. The contractor cannot enforce a contract made without a required license (489.532), and unlicensed contracting is a first-degree misdemeanor (489.531). Report to DBPR using File a Complaint on MyFloridaLicense.com.
- In Texas. An unlicensed person who violates Chapter 1702 may face a civil penalty of up to $10,000 per violation, and the same cap applies to knowingly hiring an unlicensed person (1702.381). Violations without a specified penalty are Class A misdemeanors (1702.388). Report to the DPS Regulatory Services Division.
- Document everything. Keep ads, texts, photos and payments.
- Get a licensed contractor to inspect. Unlicensed work may not meet code and may affect insurance or city registration.
- Consider legal help if you paid a lot. This guide is general information, not legal advice.
Local registration and permits: who handles them?
Installing the system is one step. Many cities also require you, the alarm user, to register or pay for a permit. Ask the installer who handles it. The loaded sources show the following, though fees conflict across sources, so use each city's own page:
| City | Local requirement from city sources |
|---|---|
| Houston | Burglar alarm permit through the city's Burglar Alarm Administration. A residential permit was listed at $50 initial and $50 renewal, valid 1 year, but older city documents conflict, so confirm |
| Dallas | Valid alarm permit required for police response (Dallas City Code ch. 15C). The city notice loaded is undated, so confirm fees |
| San Antonio | Alarm permit required under Chapter 25, Article IV of the City Code. Confirm on sa.gov |
| Austin | Alarm permit required for each alarmed location, valid 12 months. A tenant with an alarm in an apartment needs one |
| Miami | City alarm ordinance (Section 3-23) with permit year Oct. 1 to Sept. 30. Miami-Dade County amounts were not verified |
| Tampa | City page says alarm permits are not required to be filed with the City of Tampa. Hillsborough County not verified |
| Orlando | All active alarm systems in city limits must be registered with Orlando Police |
| Jacksonville | Every alarm must be registered with the Jacksonville Sheriff's Office. Registration fee amounts differ within the JSO page, so confirm |
In Texas, a DPS-licensed alarm company is exempt from city and county business permits, fees or bonds for the licensed work, except a city may charge reasonable inspection or reinspection fees for a device causing at least five false alarms in 12 months (1702.134). City permit fees are charged to alarm users, not companies. Texas Local Government Code ch. 214 subchapter F, which caps fees, applies only to small cities, not to Houston, Dallas, San Antonio or Austin.
After you choose: set up the relationship right
- Get a signed copy of everything before work starts.
- Take photos of the installed devices and the control panel.
- Test the system with the installer. Trigger an alarm and confirm the monitoring center calls you.
- Update your emergency contact list. In Florida, central-station alarms must attempt to confirm with the owner, occupant or designee before contacting police (489.529).
- Learn the passcodes and cancellation procedure.
- Register with your city if required, and keep the receipt.
- Save the installer's license number and the monitoring company's phone number in your phone.
- Calendar renewal and cancellation dates.
Related: home security checklist before you buy and alarm maintenance and testing.
How to choose a provider
- Verify the license on Texas DPS TOPS or Florida MyFloridaLicense.com.
- Check class, status, expiration and any discipline.
- Match the license holder's name to the contract.
- Ask for a certificate of insurance.
- Get at least three written proposals with the same scope.
- Fill in the quote comparison table and compare total cost over the contract term.
- Ask who owns the equipment and what happens at the end of the contract.
- Read term, renewal, cancellation, assignment and fee clauses.
- Make sure every oral promise is in writing.
- Do not sign a contract with blank spaces.
- Ask who handles city registration or permits.
- Get a written warranty and training on the system.
- Test the system before the installer leaves.
- Keep copies of all documents and calendar the renewal date.
- Keep the license record, certificate of insurance, written proposal and signed contract in one folder, so you have what you need to file a complaint with DPS or DBPR if a problem comes up.
Related home alarm and security systems guides
- How to Check an Alarm Company or Installer License in Texas and Florida
- Door-to-Door Alarm Sales and Scams: How to Protect Yourself in Texas and Florida
- Fake Alarm Takeover Calls, Contract Buyouts and Billing Scams
- Home Security Buyer's Checklist: 25 Questions to Ask Before You Sign (Texas and Florida)
- Alarm Monitoring Contracts: Length, Auto-Renewal, Cancellation and Your Rights in Texas and Florida
- How Much Does a Home Security System Cost in Texas and Florida?
- DIY vs Professionally Installed Home Security in Texas and Florida: What Changes?
- Texas Alarm Company Licensing: Occupations Code Chapter 1702 Explained for Consumers
Home alarm and security systems by state and city
Questions people ask
What questions should I ask a security installer?
Ask for the license number, who will install, whether subcontractors are used, who monitors, equipment ownership, total cost, monthly fee, contract length, renewal and cancellation terms, warranty and how permits are handled. Write the answers down and compare across companies.
What should be in a written proposal?
Company name, address and license number, a device list by model and location, monitoring details, all fees, monthly fee and term, renewal and cancellation terms, equipment ownership, warranty, timeline and who handles city registration. The FTC says to make sure the contract includes all oral promises.
What red flags suggest a bad installer?
No verifiable license, high pressure, false claims about your current company, free equipment with no monthly cost on paper, scare tactics, blank contract spaces, a refusal to give a written contract or warranty, and unusual payment demands.
Should I get multiple quotes and how do I compare them?
Yes. The FTC advises written estimates from several companies. Use the same scope and compare total cost over the contract term, not just the monthly fee. A table with license, insurance, devices, up-front cost, monthly fee, term, renewal, ownership and warranty makes differences clear.
What warranty should I expect?
The Texas and Florida statutes loaded for this guide do not set a minimum warranty for alarm equipment. The warranty is what the written contract says, so ask for equipment and labor terms in writing, including what is excluded and how to request service.
What should be in the contract?
Term, monthly fee and any increases, renewal terms, equipment ownership, cancellation and relocation fees, assignment, subcontracting and warranty. In Texas you can ask for a written contract and must receive it within 7 days. In Florida, auto renewals must be clearly disclosed and noticed (501.165).
How do I check references and complaints?
Use the DPS TOPS search and DPS complaint process in Texas, DBPR's license record in Florida, and agencies such as the FTC and your state attorney general. Also call two or three recent local customers. Do not rely only on online ratings.
What can I do if an installer is unlicensed?
Stop work and do not pay more. In Florida, report to DBPR and note that the contractor cannot enforce the contract (489.532). In Texas, report to the DPS Regulatory Services Division (1702.381 sets civil penalties up to $10,000 per violation). If you signed at home, check your 3 day cancellation right.
Does the installer need to register my alarm with the city?
Sometimes you, as the alarm user, must register or get a permit, and a licensed Texas company must notify the city of an installation within 30 days (1702.286). Rules differ by city, so ask the installer who handles it and confirm with the city.
Sources
- Texas Occupations Code ch. 1702 (Private Security Act)
- Texas DPS Private Security: licensing and registration
- Texas DPS Texas Online Private Security (TOPS) search
- Texas DPS private security consumer complaints
- Texas Insurance Code ch. 6002 (fire alarm and detection devices)
- Florida Statutes 489.521 (license number in ads)
- Florida Statutes 489.531 (prohibitions, penalties)
- Florida Statutes 489.532 (unlicensed contracts unenforceable)
- Florida Statutes 489.533 (disciplinary proceedings)
- Florida Statutes 489.537 (local government)
- Florida Statutes 489.529 (alarm confirmation required)
- Florida Statutes 501.165 (automatic renewal)
- FTC press release, April 29, 2011: tips on door-to-door home security sales
- 16 CFR Part 429 (Cooling-Off Rule), eCFR
- Texas Business & Commerce Code ch. 601
- Florida DBPR Online Services
- Texas Local Government Code ch. 214 (alarm systems)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


