New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Pest control

Bed Bug Treatment: Heat vs Chemical vs DIY, Costs, Prep and How Long It Takes

Heat, residual sprays, dusts and fumigation all kill bed bugs, but none works in one visit without follow-up. Here are the temperatures that kill them, the prep that matters, 2025 and 2026 cost ranges, and Texas and Florida rental rules.

The most effective bed bug treatment combines methods: heat or targeted insecticides to knock down the population, registered dusts and mattress encasements for lasting protection, and follow-up inspections about every two weeks. FDACS says 125°F or higher kills all life stages, and EPA says few infestations are controlled with one treatment. Expect two or more visits over several weeks, and keep monitoring for a year.

Key facts

  • Bed bugs die when their body temperature reaches 113°F (45°C); rooms must be hotter so heat reaches hidden bugs (EPA). FDACS says 125°F or higher kills all life stages.
  • A household dryer on high heat for 30 minutes kills bed bugs and eggs; washing alone might not (EPA).
  • Freezing works only at 0°F for at least three days in a sealed bag, checked with a thermometer (EPA).
  • Steam must be at least 130°F at the surface and delivered without strong airflow, or bugs scatter (EPA).
  • EPA has registered more than 300 bed bug products in seven main chemical classes; some bed bug populations are resistant to pyrethrins and pyrethroids.
  • FDACS says foggers or bug bombs are not effective for bed bugs and can be dangerous; it recommends inspections with interceptors every two weeks after treatment.
  • This Old House (updated June 11, 2026) puts whole-home bed bug treatment at $1,500 to $5,000, insecticide at $150 to $400 per room, heat at $400 to $5,500 and fumigation from $2,000.
  • Florida s. 83.51(2)(a): if a tenant must leave for extermination, the landlord must give 7 days' written notice and abate rent, and the tenant need not vacate more than 4 days.

What is the most effective bed bug treatment?

There is no single best method. Every public agency that covers bed bugs, from the U.S. Environmental Protection Agency (EPA) to the Florida Department of Agriculture and Consumer Services (FDACS), says the same thing: use integrated pest management (IPM). That means combining several tactics: correct identification, inspection, vacuuming, heat, mattress encasements, insecticidal dusts, careful use of liquid pesticides, and monitoring with interceptor traps. FDACS states plainly that relying only on liquid pesticides is not effective for bed bug control.

The reason is biology. Bed bugs hide in cracks as thin as a credit card, many populations resist the most common sprays, and UF/IFAS (University of Florida Institute of Food and Agricultural Sciences) notes that most sprays do not kill eggs. Anything that only kills the bugs it touches, on the day it is applied, leaves survivors and eggs that hatch over the next one to three weeks.

A good professional plan usually looks like this:

  1. Inspection of the bedroom, sleeping areas, couches and adjoining rooms or units.
  2. Knockdown: heat treatment of the room or home, or targeted crack-and-crevice and spot treatments with products labeled for bed bugs.
  3. Residual protection: registered desiccant dusts in voids, behind outlet plates and under baseboards, plus encasements on the mattress and box spring.
  4. Follow-up visits about two weeks apart, using interceptors and visual checks, with retreatment where bugs are found.
  5. Long-term monitoring for at least a year, as EPA recommends.

Heat vs chemical vs dust vs fumigation: how the main methods compare

MethodHow it worksStrengthsLimitsTypical cost (source, date)
Whole-room or whole-home heatProfessional heaters raise the room and contents high enough that hidden bugs reach lethal temperatureKills all life stages, including eggs, in the treated space in one session; no chemical residue on bedsNo residual effect, so bugs carried back in or missed in cooler spots survive; heat-sensitive items must be removed; needs fans, monitoring and experience$400 to $5,500 (This Old House, June 2026)
Residual insecticide sprays and spot treatmentsProducts labeled for bed bugs applied to cracks, crevices, frames and baseboardsLower cost per room; keeps working for a period after applicationResistance to pyrethroids is common; most sprays must hit the bug directly; eggs often survive, so repeat visits are needed$150 to $400 per room (This Old House, June 2026)
Desiccant dusts (registered silica gel or diatomaceous earth)Damage the bug's waxy outer coating so it dries outBugs cannot become resistant; long-lasting in voidsSlow; EPA says they may take several months to work; crack-and-crevice use onlyUsually part of a professional visit
SteamSurface steam at 130°F or moreGood on mattresses, couches and seams with no residueNo residual; too much airflow scatters bugs; does not penetrate deep$250 to $1,000 per room (This Old House, June 2026)
Structural or container fumigationA licensed fumigator fills a sealed structure or container with gasKills every stage everywhere in the space; FDACS calls it efficient for very large infestationsExpensive; you must leave for days; no residual, so it cannot prevent reinfestationFrom $2,000 (This Old House, June 2026)
Do-it-yourselfLaundering, vacuuming, encasements, interceptors, registered productsLow cost; useful for very early or single-room casesEPA warns success depends on clutter, neighbors and everyone participating; delays let bugs spreadSupplies only

Cost ranges vary a lot by source and region. FDACS cites an average of about $1,000 per home from the trade magazine Pest Control Technology, without a date. Fixr (updated January 31, 2025) puts bed bug treatment at $300 to $3,500, from chemically treating one bedroom up to heat-treating a four- to five-bedroom home. Get at least two written quotes that spell out the method, the number of follow-up visits, and any guarantee.

What temperature kills bed bugs, and for how long?

These are the numbers from EPA, FDACS and UF/IFAS. Use them to judge any heat or cold method, including your dryer.

MethodTargetSource
Bug body temperature113°F (45°C) kills bed bugs; the room or container must be hotter so heat reaches bugs in every hiding spotEPA
All life stages including eggs125°F or higherFDACS
Clothes dryerHigh heat for 30 minutesEPA and FDACS
SteamAt least 130°F, low airflow, use a diffuserEPA
Freezer0°F for at least three days, items sealed in a bag, temperature checked with a thermometerEPA
Heated container or insulated box113 to 115°F (45 to 46°C) inside the contentsUF/IFAS

Does washing clothes kill bed bugs?

The dryer is what matters. EPA says washing alone might not do the job, but a dryer on high for 30 minutes kills bed bugs and eggs. You can put dry items straight into the dryer without washing. Bag items before you carry them to the laundry, and put them into a new clean bag when they come out. Sneakers, stuffed animals and backpacks that can handle heat can go in the dryer too; check care labels.

Do steamers work on bed bugs?

Steam kills bed bugs and eggs on contact when it is hot enough at the surface. UF/IFAS calls it ideal for mattresses and other surfaces with close skin contact. EPA's caution is airflow: a forceful jet can blow bugs out of a seam instead of killing them. Move the steam head slowly and use a diffuser, as EPA advises. Steam does not leave anything behind, so it is a supplement, not a full treatment.

Why you should not try to heat your home yourself

EPA warns that raising the thermostat, running propane space heaters or using a fireplace does not kill bed bugs and is dangerous; EPA notes do-it-yourself heating has burned down homes. Professional heat crews use heaters, fans and wireless temperature probes placed inside mattresses, couches and wall gaps to prove that the coldest spot reached lethal temperature. Ask any company what their target and hold time are and how they verify it.

Does heat treatment kill bed bugs in one day?

A well-run heat treatment can kill all bed bugs and eggs in the spaces that reach lethal temperature in a single day. That is its big advantage. But heat has no lasting effect. Bugs hiding in a cool corner, inside a wall void that never got hot enough, in a car, or in a neighbor's unit can return the next week.

That is why reputable heat services still include a follow-up inspection, often place interceptors, and may apply a registered dust in wall voids after the heat. FDACS says follow-up inspections every two weeks are critical. If a company promises "one visit and done" with no follow-up, ask what happens if you find a bug in three weeks.

Heat is especially useful when:

  • You have a lot of furniture and clothing that would be hard to bag and launder.
  • Someone in the home is sensitive to pesticides.
  • Resistance is suspected because earlier sprays did not work.
  • You need a fast result, for example before a move.

Heat is harder in apartments where bugs move between units, and it can damage some items. Typical items to remove or protect include candles, crayons, aerosol cans, medications, vinyl records, some electronics, plants, pets and anything that can melt or burst. Your company should give you a written list.

How do chemical treatments work, and what is pyrethroid resistance?

EPA has registered more than 300 products for use against bed bugs. Most can be used by consumers, though a few are limited to trained professionals. EPA groups them into seven main chemical classes, each with a different mode of action (the way it kills the bug):

  • Pyrethrins and pyrethroids: the most common. Pyrethrins come from chrysanthemum flowers; pyrethroids are synthetic versions.
  • Desiccants: silica gel and diatomaceous earth products registered as pesticides. They destroy the waxy coating so bugs dry out.
  • Biochemicals: cold-pressed neem oil is the only registered biochemical for bed bugs.
  • Pyrroles: chlorfenapyr is the only one registered for bed bugs.
  • Neonicotinoids: act on a different nerve receptor, so bugs resistant to other products stay susceptible.
  • Insect growth regulators (IGRs): disrupt development and molting.
  • EPA also notes dichlorvos (DDVP) pest strips registered only for small enclosures.

Resistance is the reason sprays fail

EPA says some bed bug populations have become resistant to pyrethrins and pyrethroids, and where resistance exists these products may just push bugs to a new hiding spot. UF/IFAS adds that resistance may trace back to DDT resistance first reported in the 1950s, and FDACS says resistance grows quickly in bed bugs compared with other insects. FDACS recommends products with two or more modes of action. EPA suggests combination products or switching to a different chemical class when control fails.

UF/IFAS also explains why residues work poorly: unlike cockroaches, bed bugs lack sticky pads on their feet, so little pesticide sticks to them when they walk across a treated surface. Most sprays must hit the bug. That is also why dusts, which transfer more easily, are often preferred for lasting protection, and why professionals budget hours per bedroom. UF/IFAS says many companies budget about 5 to 10 hours to treat a typical bedroom with a spray-based approach.

Are bed bug sprays safe for kids and pets?

Registered products are evaluated for safety when used exactly as the label directs. The label is the law: it says where the product may go (for example, cracks and crevices only, or not on mattresses), how long to stay off treated surfaces, and what protective steps to take. EPA's key safety rules for bed bugs:

  • Use only products with an EPA registration number that list bed bugs on the label.
  • Never use an outdoor-only product indoors.
  • Never apply any pesticide, including mosquito repellent, to your skin for bed bugs. EPA has registered none for that use.
  • Do not apply to beds, furniture or clothing unless the label allows it.
  • Do not use pool-grade or food-grade diatomaceous earth; EPA says it can harm you when inhaled. Use only the registered pesticide version.
  • Do not buy pesticides from street vendors or flea markets.

Ask your pest professional which products they will use and how long children and pets should stay out. In Florida, companies must give you the product name, active ingredient and label safety information on request. For poison questions call Poison Help at 1-800-222-1222. See our pesticide safety guide.

Do foggers or bug bombs work on bed bugs?

No. FDACS says foggers have been proven ineffective for bed bug control and can be dangerous to the applicator, residents and pets. UF/IFAS cites a published study (Jones and Bryant, 2012) that found over-the-counter total release foggers did not control bed bugs. EPA explains why: the fog settles on open surfaces and does not reach the cracks and crevices where bed bugs hide.

Foggers also cause injuries. EPA warns that using more foggers than the label calls for can cause a fire or explosion, and says to turn off pilot lights and unplug appliances if you use one for any pest. Some foggers contain pyrethroids that resistant bed bugs survive anyway.

Can I get rid of bed bugs myself?

Sometimes, for a very small, early infestation in a single-family home where everyone cooperates. EPA's do-it-yourself guide says success depends on how many bugs you have, how much clutter there is, whether your neighbors have bed bugs, and whether every resident participates. EPA also warns that taking time to treat on your own could let the infestation spread, and recommends getting a professional involved as soon as possible.

A realistic DIY plan, based on EPA steps:

  1. Confirm the ID with your county extension office.
  2. Make a schedule and keep records of dates and exact spots where you find bugs.
  3. Contain: bag infested items; heat-dry everything that can take it; seal items you cannot treat in a bag for up to a year.
  4. Encase the mattress and box spring in tested, zippered encasements and leave them on for a year.
  5. Vacuum seams, frames, baseboards and couches; seal and toss the bag outdoors each time.
  6. Caulk cracks around baseboards and fix loose wallpaper.
  7. Install interceptors under each bed and couch leg; pull furniture 6 inches from walls.
  8. Use only registered products labeled for bed bugs, mainly in cracks and crevices, and consider a registered desiccant dust.
  9. Check every few days, then at least every 7 days; if you keep finding bugs, call a professional.

Fixr (January 2025) notes heat machines can be rented in some areas for about $249 to $299, but EPA cautions that do-it-yourself heat may not work. Portable heating chambers for luggage and small items exist; EPA notes they are not regulated by EPA, so follow directions carefully.

If you rent an apartment, DIY is usually the wrong move. Bed bugs travel between units, and in Florida most landlords of multi-unit buildings have a legal duty to arrange extermination. Tell your landlord first.

How to prepare for a bed bug treatment

EPA says preparation is essential whether you hire a professional or treat yourself. Always follow your company's written prep sheet, since heat and chemical prep differ. Common steps from EPA guidance:

Do

  • Reduce clutter. Get rid of extra papers and magazines, and replace cardboard boxes with plastic bins, because bugs hide in cardboard.
  • Bag clothing, linens and curtains in sealed plastic bags. Heat-dry what you can on high for 30 minutes, then keep clean items sealed in new bags.
  • Empty nightstand and dresser drawers so they can be inspected and treated.
  • Move the bed and furniture at least 6 inches from the walls.
  • Vacuum thoroughly and dispose of the bag sealed in plastic, outdoors.
  • Caulk cracks and repair loose wallpaper or damaged wallboard.
  • Remove and clean drapes and drapery hardware.
  • Keep bagged items in the same room until treated, to avoid spreading bugs.
  • Tell the technician about infants, pregnancy, asthma, pets, fish tanks and medical devices.

Do not

  • Do not move items from an infested room to a clean room.
  • Do not start sleeping in another room or on the couch. The bugs follow and you spread the infestation.
  • Do not use foggers, outdoor products, rubbing alcohol, gasoline or kerosene.
  • Do not throw out furniture unless the company says it cannot be treated. If you do, slash it or mark it so no one takes it.
  • Do not stay with friends and carry unbagged belongings into their home.

Should I sleep in another room?

EPA's prep guidance says not to move items from infested areas to non-infested areas, and professionals widely advise staying in your own bed. With encasements on and interceptors under the legs, the bed becomes a monitored trap: bugs coming to bite you have to climb into the interceptor. Moving to the couch creates a second infested area.

Do mattress encasements help, and do I need to throw away my mattress?

Encasements are one of the most useful tools you can buy. EPA explains that a sealed encasement traps any bed bugs inside the mattress or box spring, where they eventually starve, and leaves no seams for new bugs to hide in. Its light color makes bugs easy to see. UF/IFAS recommends buying covers labeled both "bite proof" and "escape proof." EPA advises choosing covers tested for bed bugs, strong enough to last a full year, with zippers that close completely, and leaving them on for at least a year since bed bugs can survive months without feeding.

You rarely need to throw away a mattress. EPA's top tips say most items can be treated and saved, and throwing them out is expensive and can spread bed bugs. Replace a mattress only if it is torn and cannot be encased, or if it is too damaged to use. If you buy a new one, encase it before it goes on an infested bed frame, and treat the frame first.

How long after treatment do bed bugs die, and why am I still getting bitten?

It depends on the method:

  • Heat: bugs in areas that reached lethal temperature die during the treatment.
  • Sprays: contact kills are fast; residual products kill bugs that cross them over the following days or weeks. Resistant bugs may survive.
  • Dusts: slow. EPA says desiccants may take several months to work.
  • Eggs: FDACS notes most treatment methods do not kill eggs, which can hatch within two weeks. That is why follow-up is scheduled about two weeks later.

Still getting bitten one to three weeks after a chemical treatment is common, as newly hatched nymphs come out to feed and cross treated surfaces. Bites can also show up days after the actual feeding, since reactions are often delayed. What matters is the trend in your interceptors: fewer catches, then none. Call your company if bites or catches stay steady or increase after the second visit.

Other reasons for continued bites:

  • A neighboring unit was not inspected or treated.
  • Untreated items (a car seat, a backpack, a recliner) were brought back in.
  • The bites are from something else. EPA notes bites are a poor indicator, so confirm with a live bug.
  • Resistance to the product used, which calls for a different chemical class or heat.

How many visits does bed bug treatment take, and how long does it all take?

EPA says few infestations are controlled with only one treatment and that treatment can take weeks to months. FDACS recommends inspections with interceptors every two weeks after treatment until there are no signs of bed bugs. A typical timeline:

WhenWhat happens
Week 0Inspection, prep, first treatment (heat or chemical), encasements and interceptors installed
Week 2Follow-up inspection; retreat any active spots; catch newly hatched nymphs
Week 4 to 6Third visit if any activity remains
Months 2 to 12Keep encasements on and check interceptors at least weekly; EPA says keep checking for at least a year

This Old House (June 2026) says follow-up inspection visits average $100 to $150 each when they are not included. Ask whether follow-ups are part of the price and how long any guarantee lasts.

How much does bed bug treatment cost? Detailed 2022 to 2026 price ranges

Prices vary widely by home size, how far the bugs have spread, the method, and how many follow-ups are included. No public source we found publishes Texas-only or Florida-only bed bug prices, so the ranges below are national. Treat them as a starting point and get at least two written quotes.

By number of rooms (This Old House, updated June 11, 2026)

Area treatedTypical cost
One room$300 to $800
Two rooms$700 to $1,600
Three rooms$1,000 to $2,400
Whole house$1,500 to $5,000 or more

By severity (This Old House, June 2026)

InfestationTypical cost
Mild$225 to $800
Moderate$325 to $2,500
Severe$3,500 to $5,000 or more

By method

MethodThis Old House (June 2026)Fixr per square foot and per room (updated November 22, 2022)
Insecticide or chemical$150 to $400 per room$2 to $4.50 per sq ft; $200 to $600 per room
Heat$400 to $5,500$1 to $3 per sq ft; $100 to $500 per room
Steam$250 to $1,000 per room$2 to $7.50 per sq ft; $250 to $1,000 per room
Freeze or cold$300 to $1,500$3 to $6 per sq ft; $400 to $800 per room
Fumigation$2,000 or more$4 to $8 per sq ft; $500 to $1,050 per room

Other line items to ask about

  • Follow-up inspections: This Old House says about $100 to $150 per visit when not included.
  • Inspection: Fixr says a thorough inspection can take 1 to 4 hours; some companies credit the fee toward treatment.
  • Emergency or same-day service: Fixr says this can add $200 to $500.
  • Service contracts: Fixr (2022) lists yearly contract costs of about $750 to $1,100 for a single service, $1,800 to $2,500 quarterly and $5,000 to $8,500 monthly; This Old House (2026) lists one-time service at $300 to $1,100. Recurring contracts make more sense for hotels, dorms and apartment buildings than for a single home.
  • Supplies: encasements, interceptors and laundry costs, plus possible furniture replacement.
  • Fumigation extras: for whole-structure fumigation, This Old House's fumigation guide (March 2026) budgets $500 to $1,000 for post-fumigation cleaning and about $159 a night for a hotel while you are out.

FDACS cites an average of about $1,000 per home from the trade magazine Pest Control Technology, without a date. Fixr's January 2025 general pest control guide lists $300 to $3,500. The spread between sources is a reminder that the scope of work, not the headline price, is what you need to compare. A low quote that skips follow-up visits or inspection of nearby rooms is often more expensive in the end, a point EPA makes when it warns against applicators who do not use IPM or provide follow-up.

If you rent in a Florida multi-unit building, the landlord generally handles extermination under s. 83.51(2)(a) unless the lease says otherwise in writing. See pest control costs in Texas and Florida for broader pricing.

What happens on heat treatment day?

Companies differ, so get their written prep sheet. A typical professional heat treatment looks like this:

  1. Walk-through: the technician confirms the rooms to treat, checks prep, and identifies heat-sensitive items to remove.
  2. Setup: electric or propane-fired heaters, large fans and temperature sensors are placed. Fixr (2022) describes hot air at 135 to 145°F circulated for an hour or more with fans.
  3. Heating and monitoring: crews move furniture, flip mattresses and open drawers so heat reaches every hiding place, and track probe readings until the coolest spots reach and hold lethal temperature. EPA notes bugs die at a body temperature of 113°F and FDACS says 125°F kills all life stages; the room must run hotter to get there.
  4. Cool-down and add-ons: many companies apply a registered dust to wall voids and outlets or install interceptors once the space cools.
  5. Re-entry: you can usually return after the space cools; follow the company's instructions.
  6. Follow-up: an inspection about two weeks later is common, matching FDACS's advice to check every two weeks.

Common items to remove or protect before heat

  • Aerosol cans, lighters, propane bottles and anything flammable or pressurized
  • Candles, crayons, lipstick and other items that melt
  • Medications, vitamins and some foods
  • Pets, fish tanks and houseplants
  • Vinyl records, film, photos and some art
  • Electronics the company flags as heat-sensitive

Bag removed items and treat them separately (dryer, portable heat chamber, or sealed storage) so you do not reintroduce bugs. Heat-sensitive items that cannot be treated can be sealed in a bag or bin; EPA says up to a year may be needed to ensure any active bugs are dead.

Room by room: how to treat beds, carpets, clothes, furniture, luggage and cars

WhereWhat works (EPA, FDACS and UF/IFAS guidance)What to avoid
Mattress and box springVacuum seams and tufts; steam at 130°F or more with low airflow; then seal in tested encasements for at least a yearSoaking with pesticides (UF/IFAS warns against soaking mattresses and upholstery); throwing it out without slashing or marking it
Bed frame and headboardDisassemble if possible, vacuum and steam joints and screw holes, have a professional treat cracks per label, add interceptorsPushing the bed against the wall; bedding touching the floor
Bedding and clothingBag in the room, carry sealed to the laundry, dry on high for 30 minutes, store in new sealed bagsCarrying loose laundry through the house; relying on washing alone
Curtains and drapesLaunder and dry on high, or dry clean; clean drapery hardware (EPA)Leaving rods and hooks untreated
Carpet and baseboardsVacuum edges thoroughly and dispose of the bag sealed outdoors; caulk baseboard gaps; registered dusts in voids by a proBroadcast spraying carpet with products not labeled for it
Upholstered furnitureVacuum and steam seams and cushions; professional treatment; heat chamber for cushionsMoving the couch to another room or giving it away
Dressers and nightstandsEmpty drawers, launder contents, vacuum joints; UF/IFAS notes drawers should be removed so undersides can be treatedLeaving drawers full during treatment
Books, papers, toysInspect; bag and freeze at 0°F for at least three days with a thermometer, or seal and store; reduce clutterKeeping cardboard boxes, which EPA says bugs can hide in
Electronics and outletsProfessional inspection and treatment; tape or caulk outlet plate edges (EPA)Spraying into outlets or devices
LuggageVacuum, then heat (dryer for soft bags if the label allows, or a portable heat chamber) or seal and store away from bedroomsStoring suitcases under the bed
CarVacuum seats and seams; bag and heat-dry anything washable; EPA notes heat in a hot car may work for bagged items but success depends on climateUsing foggers or unregistered gases in a vehicle

The common thread is containment: bag items where they are, treat them, and keep treated items sealed until the home is clear. EPA's top tips say most belongings can be treated and saved.

Why bed bug treatments fail: EPA's checklist

EPA lists the most common reasons a bed bug treatment fails. Use it to troubleshoot with your company before paying for another round:

  1. Inadequate preparation: clutter not removed, cracks and crevices not sealed.
  2. Missed resting areas: hampers, bed frames and furniture overlooked.
  3. Nearby areas not treated: adjacent rooms or other apartments in multi-unit housing.
  4. Wrong label rates: EPA warns that applying too little may not kill bugs and may speed up resistance.
  5. No timely follow-up: many pesticides do not kill eggs, so treatment must be repeated after eggs hatch.
  6. Not enough time: some products, such as drying agents and growth regulators, work but take time.
  7. Resistance: EPA says resistance can only be verified in laboratory tests and varies from community to community, so it is one possible cause among many.

EPA's recommendations when treatments fail: stay vigilant with monitoring, hire trained and experienced professionals, rotate to different labeled pesticides for sequential treatments, or use products such as registered diatomaceous earth, for which resistance has not been reported, together with other methods.

If you are a tenant and the landlord's treatment keeps failing, document each visit, the products used and continued sightings, and see bed bugs in rentals and hotels.

Bed bug treatment in Texas and Florida rentals and hotels

Texas

  • Texas Occupations Code s. 1951.459 says the owner of an apartment building, hotel, motel, lodge, hospital, nursing home, day care, school or warehouse may get pest control only from a licensed company or the owner's own licensed employee.
  • For apartment buildings with five or more units, the owner or manager must post a pest control sign in a common area or leave the Texas Department of Agriculture (TDA) consumer information sheet at affected units at least 48 hours before planned indoor treatments. Hotels must post a sign at least 48 hours ahead unless there is a signed emergency.
  • Texas Property Code ch. 92 has no bed bug section. Tenants use the general repair process in s. 92.052 and 92.056 for conditions that materially affect health or safety.

Florida

  • FDACS highly recommends a licensed pest control company and offers an online license lookup.
  • For rentals other than a single-family home or duplex, s. 83.51(2)(a) requires the landlord to make reasonable provisions for bedbug extermination unless otherwise agreed in writing.
  • If you must leave for treatment (for example, fumigation or heat), the landlord must give 7 days' written notice, abate rent, and cannot require you to stay out more than 4 days.
  • FDACS says that if there is no escape clause in your lease, the landlord is responsible, and you can file a complaint by calling 1-800-HELP-FLA.

Full details on who pays, rent, and breaking a lease are in Bed Bugs in Rentals and Hotels. For hiring and checking a company, see how to choose and verify a pest control company. Local pages: Houston and Miami.

Special situations: babies, pets, asthma and older relatives

Bed bug control in a home with vulnerable people needs extra planning, not avoidance. Waiting lets the infestation grow, which means more bites and more treatment later.

  • Infants and cribs: inspect crib seams, mattress edges and the frame joints. Launder and heat-dry crib bedding. Ask your company which areas they will not treat with liquids and which non-chemical steps (vacuuming, steam, encasement, heat) they will use near the crib. Never apply any pesticide or repellent to a child's skin for bed bugs; EPA has registered none for that use.
  • Asthma or chemical sensitivity: heat, steam, vacuuming and encasements reduce pesticide use. If dusts are used, they should go only into cracks, crevices and voids, as EPA limits desiccants to reduce inhalation risk.
  • Pets: remove pets, bird cages and fish tanks before treatment, as your company directs; FDACS warns foggers can be dangerous to pets as well as people. Wash pet bedding and dry it on high heat. Do not use bed bug sprays on animals.
  • Older relatives and people with disabilities: prep is the hard part. Bagging clothing, emptying drawers and moving furniture 6 inches from walls may require family help or a company that offers prep assistance. Florida and Texas landlords should plan for this in multi-unit buildings.
  • Treated mattresses and furniture: UF/IFAS cautions against soaking mattresses and upholstery with pesticides and says to let treated items dry thoroughly before use.

Keep product labels and the company's treatment record. If anyone has symptoms after a treatment, call Poison Help at 1-800-222-1222, or 911 for trouble breathing.

Questions to ask before you hire a bed bug company

EPA advises choosing a company experienced with bed bugs that uses IPM and provides follow-up inspections and repeat treatments if needed. EPA warns that a low bid from an applicator who skips IPM or follow-up is less likely to work. Ask:

  1. Are you licensed? (Texas: TDA license lookup. Florida: FDACS pest control database.)
  2. What method will you use in each room, and why?
  3. For heat: what temperature, for how long, and how do you measure it inside furniture?
  4. For chemicals: which products and modes of action, and how do you handle pyrethroid resistance?
  5. How many follow-up visits are included, and how far apart?
  6. Will you inspect adjoining rooms or units?
  7. What exactly must I do to prepare, and what should I remove?
  8. What is the guarantee, how long does it last, and what voids it?
  9. How long must children and pets stay out after treatment?

Get the plan, price and guarantee in writing. See also pest control costs in Texas and Florida.

How to choose a provider

  • Confirm the pest is a bed bug before paying for treatment.
  • Get two written quotes that list method, follow-up visits and guarantee.
  • Ask heat companies for their target temperature and how they verify it.
  • Encase the mattress and box spring; leave encasements on for a year.
  • Install interceptors under bed and couch legs and check them weekly.
  • Bag clothing and linens; dry on high heat for 30 minutes.
  • Remove cardboard; use sealed plastic bins.
  • Pull furniture 6 inches from walls and empty drawers.
  • Do not fog, do not use outdoor products, and do not move to another room.
  • Schedule follow-up inspections about two weeks apart.
  • Renters: notify the landlord in writing before any treatment.
  • Keep a log of dates and locations of every bug found.

Related pest control guides

Pest control by state and city

Questions people ask

Can bed bugs survive a heat treatment?

Bugs in spaces that reach lethal temperature do not survive; EPA says bed bugs die at a body temperature of 113°F and FDACS says 125°F or higher kills every life stage. Survivors usually come from spots that stayed cooler, such as dense piles of clothing, wall voids or furniture against an outside wall, or from untreated items and neighboring units. That is why follow-up inspections still matter after heat.

Is fumigation better than heat for bed bugs?

Fumigation kills every stage everywhere in the sealed space, and FDACS says it may be the most efficient option for infestations covering most of a home. It costs more, from about $2,000 per This Old House (June 2026), you must leave for a few days, and UF/IFAS notes it leaves no residual protection. Heat is more common for one home or unit. Both need follow-up inspections.

Does diatomaceous earth kill bed bugs?

Registered diatomaceous earth and silica gel dusts can kill bed bugs by drying them out, and EPA says bugs cannot become resistant to them. They work slowly, possibly over several months, and belong in cracks and crevices only. EPA warns not to use pool-grade or food-grade diatomaceous earth because it is not registered for this use and can harm you when inhaled.

Can I use rubbing alcohol on bed bugs?

Do not. EPA says rubbing alcohol that is not a registered pesticide is illegal to use this way, vaporizes quickly, is flammable and has caused numerous house fires during bed bug control. It also only kills bugs it soaks directly. Use a vacuum for visible bugs and registered products or a licensed professional for treatment.

How long should I wait to sleep in my bed after treatment?

Follow the product label and your technician's written instructions, which state when treated areas can be reused. After heat, you can usually return once the space cools. After chemical treatment, wait until sprays have dried and the re-entry time on the label has passed. Keep sleeping in the same bed with encasements and interceptors, which helps the treatment work.

Do I need to leave my home during bed bug treatment?

For heat treatment you usually leave for the day. For chemical treatment you typically leave for a few hours until products dry, per the label. For fumigation you leave for days. In Florida, if a landlord requires you to vacate for extermination, s. 83.51(2)(a) requires 7 days' written notice, a rent abatement, and no more than 4 days away.

Will my landlord pay for bed bug treatment?

In Florida, landlords of rentals other than single-family homes and duplexes must make reasonable provisions for bedbug extermination unless otherwise agreed in writing. In Texas, there is no bed bug statute, but the Property Code repair process applies to conditions that materially affect health or safety, and lease terms matter. See our rentals guide. This is general information, not legal advice.

Is heat or chemical treatment cheaper?

It depends on scope. This Old House (June 2026) lists insecticide treatment at $150 to $400 per room and heat at $400 to $5,500 overall, while Fixr's 2022 guide lists heat at $1 to $3 per square foot and chemical treatment at $2 to $4.50 per square foot. Heat often costs more up front but may need fewer visits; chemical plans usually include two or more visits. Compare total cost including follow-ups.

Do I need to treat my car for bed bugs?

Usually not, unless you find bugs there or have been carrying infested items in it. Vacuum the seats and seams, bag and heat-dry anything washable, and avoid hauling unbagged furniture or bedding. EPA notes that heat inside a closed car in the sun may kill bugs in bagged items, but success depends on how hot it gets. Do not use foggers or unregistered gases in a vehicle.

How do I know the bed bugs are gone?

EPA recommends inspecting at least every 7 days and keeping interceptors and encasements in place for at least a year. When several weeks pass with no bugs in interceptors, no new fecal spots on encasements and no confirmed bites, the treatment has likely worked. Many companies schedule a final inspection. One stray bug months later should be identified and reported quickly.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration