Local Guide · Pest control
How Do You Get a Texas Pest Control License? Apprentice, Technician, Certified Applicator and Business
A plain-English map of the Texas Department of Agriculture license ladder, with the current fees, training hours, exam vendor, insurance rule and renewal deadlines.
To get a Texas pest control license, a licensed employer registers you as an apprentice within 10 days of hire ($125). You finish 20 general classroom hours, 8 classroom and 40 on-the-job hours per category, and an approved Technician Training Course, then pass the technician exam ($64 per category) with Metro Institute. After six months as a technician and 12 of 24 months of supervised work, you can pass the General Standards and a category exam at 70% to become a certified applicator ($125).
Key facts
- Texas pest control licensing is run by the Structural Pest Control Service of the Texas Department of Agriculture under Occupations Code ch. 1951.
- Apprentices must be registered within 10 days of hire; the $125 card lasts 12 months and the technician exam must be passed before it expires.
- Apprentice training: 20 general classroom hours, plus 8 classroom and 40 on-the-job hours per category, plus an approved Technician Training Course.
- Metro Institute has given TDA structural pest exams since May 19, 2025; technician exams cost $64 per category.
- Certified applicators must pass General Standards and at least one category exam with 70% or higher.
- Texas has seven license categories under 4 TAC 7.124.
- Business licenses cost $300 per location; TDA rule 4 TAC 7.123 requires $500,000/$1,000,000 insurance even though the statute sets $200,000/$300,000.
- Certified applicators need two general CEUs plus one per category each calendar year, except the first year.
- Late renewal costs 1.5 times the fee within 90 days and 2 times from 91 days to one year.
Who regulates pest control licenses in Texas?
Texas pest control licensing runs under Chapter 1951 of the Texas Occupations Code, which can be cited as the Texas Structural Pest Control Act. The program is run by the Structural Pest Control Service (SPCS), a part of the Texas Department of Agriculture (TDA). TDA is the only state agency that issues these licenses. Cities such as Houston, Dallas, San Antonio and Austin cannot pass their own ordinances on pesticide sale or use, though they keep power over zoning, fire and building codes (including fumigation and fogging rules), disposal sites and sewer discharge.
The law reaches further than most people expect. Under Section 1951.003 you are in the "business of structural pest control" if you do any of these for pay, even as part of your job:
- Inspect for or identify infestations of insects, spiders, mites, ticks, wood-infesting organisms, rodents, weeds, nuisance birds or other unwanted animals in homes, vehicles, ships, docks or other structures.
- Inspect for pests or diseases of trees, shrubs and plantings in a park or next to a home, business, industrial plant, institutional building or street.
- Write inspection reports, recommendations, estimates or bids about those infestations.
- Sign contracts or perform services to prevent, control or get rid of them with pesticides or mechanical devices.
That means a person who only does free inspections and quotes for a pest control company still falls under the Act. So does advertising: TDA says a business cannot advertise or solicit pest control work until it has a business license and an applicator certified in each category it offers.
Who does not need a Texas structural pest license
- People treating the home they own or rent as their own dwelling (Sec. 1951.052).
- Farmers and custom or aerial applicators working agricultural land (Sec. 1951.054). They fall under TDA's separate agricultural pesticide program under Chapter 76 of the Agriculture Code.
- People treating growing plants, trees and grass who hold a TDA commercial or noncommercial applicator license under Chapter 76 of the Agriculture Code that covers the work (Sec. 1951.053).
- Registered beekeepers removing honey bees without pesticides (Sec. 1951.056).
- Some non-pesticide work: using a raptor to move birds, removing pests while cleaning a chimney, live-trapping an animal, or installing non-pesticide barriers against nuisance animals (Sec. 1951.058).
An employee whose main job is not pest control can use general-use pesticides on the employer's premises, but that exception does not apply to apartment buildings, day-care centers, hospitals, nursing homes, hotels and motels, warehouses, food-processing plants, state or local government facilities, or schools (Sec. 1951.051). Those buildings need a licensed company or a licensed employee. Restricted-use and state-limited-use pesticides always require a license.
What are the license levels in Texas, from apprentice to business owner?
Texas uses a ladder. Most people start at the bottom and climb. Here is each rung, with the 2026 fees published by TDA.
| Level | What you can do | Main requirements | TDA fee |
|---|---|---|---|
| Apprentice (registration) | Learn and work under a licensed applicator. Cannot work alone until required training is done. | Employer registers you within 10 days of hire. Card lasts 12 months. | $125 (covers apprentice registration and later technician license) |
| Technician (commercial or noncommercial) | Treat in the categories on your license under the direct supervision of a certified applicator. | 20 + 8 + 40 hours of training, approved Technician Training Course, pass category exam. | $64 per category exam; $125 renewal |
| Certified applicator (commercial or noncommercial) | Run pest control work, supervise and train apprentices and technicians, use restricted-use products in your categories. | Experience or degree route, pass General Standards plus a category exam at 70% or higher. | $125 license; $125 renewal; exam fees paid to the testing vendor |
| Business license | Advertise, bid and sell pest control services from one location. | A Responsible Certified Applicator, insurance on form ALS-1101, tax ID. | $300 original and renewal (commercial); no fee for noncommercial |
Commercial versus noncommercial
A commercial technician or certified applicator works for a pest control company that sells services to the public. A noncommercial license is for someone who works only on the employer's own property, such as a government agency, apartment building, day-care center, hospital, nursing home, hotel, motel, lodge, warehouse, food-processing plant, school or educational institution. A noncommercial license holder cannot sell services to anyone else (Sec. 1951.458). If you are a maintenance tech at an apartment complex in Dallas and you treat roaches in units, this is the license you need.
The Responsible Certified Applicator (RCA)
Every business license must name one commercial certified applicator, registered with the business, as its Responsible Certified Applicator. The RCA is in charge of training and supervising all pest control at that location. One person can be the RCA for only one business license location, though they can work at other locations as a regular certified applicator. A business may not operate without an RCA. If the RCA dies, becomes incapacitated or leaves, the business can ask for a temporary hardship in writing to SPCS@TexasAgriculture.gov within 20 business days. TDA reviews these case by case and the business must have current employees registered.
Step 1: How do you register as an apprentice?
You cannot sign up as an apprentice on your own. A licensed business (or noncommercial employer) hires you, then files the Application for Apprentice Registration and Technician License with the $125 fee within 10 days of your hire date or the date you begin pest control work. TDA warns that if the registration arrives more than 10 days after hire, the hire date will not be accepted as the effective date. Training done before you were hired does not count toward apprentice training, under the 2023 rule changes to 4 TAC 7.132.
SPCS reviews the application and runs a criminal background review. If approved, TDA issues an apprentice card good for 12 months from the date of hire.
Can you work right away?
Yes, but not alone. An apprentice may not work without a licensed applicator physically present until finishing all the training in 4 TAC 7.132 (other than the Technician Training Course). After that training, you may treat in the completed category under the direct supervision of a certified applicator, and a certified applicator must be physically present at least three days a week to instruct you.
Apprentice training hours
- 20 hours of general classroom training, with at least 2 hours in each of 10 subjects: laws, pest recognition, labels, safety, environmental protection, equipment and techniques, formulations, emergency and spill procedures, basic math, chemistry, toxicology and entomology, and non-chemical and IPM methods.
- 8 hours of classroom training in each category you want on your license.
- 40 hours of on-the-job training in each category.
- An SPCS-approved Technician Training Course, completed before you can take the technician exam.
Your employer records all of this on a Verifiable Training Record (VTR) kept in your personnel file, and SPCS inspectors can review it. Keep your own copy. If you change jobs, you will want proof of what you finished.
Integrated pest management (IPM) means using inspection, sanitation, exclusion and other non-chemical steps first, and pesticides only as needed. It shows up on every Texas exam.
Step 2: How do you become a licensed technician?
Once training is complete, you submit the Application for Technician Exam. After TDA approves it, you contact Metro Institute to schedule. TDA lists the technician exam fee as $64 per category. Pass the exam in any category where you finished training and TDA issues your technician license in that category.
The clock matters. You must pass before your apprentice card expires. You can retest as many times as needed within the 12-month period. If you do not pass in time, TDA says you must re-register as an apprentice, redo all on-the-job and classroom training (other than the Technician Training Course, if already done) and file a new SPT-420 application. Plan to test well before month 12.
What technicians must keep doing
- Meet in person with your supervising certified applicator one day per week.
- Complete 8 hours of verifiable training in the general standards each calendar year. Two of the eight hours may be on-the-job or hands-on. Approved CEU courses count hour for hour. No course may be repeated for credit in the same year.
- Renew yearly. A technician license expires along with the license of the business or noncommercial certified applicator it is tied to.
- Hold a license for every business you work for. A technician must be licensed for each employer.
Adding a category
Since January 1, 2024, a technician who wants another category must complete 40 hours of on-the-job training and 8 hours of classroom training in that category, submit form SPT-415, and pass the category exam. If the SPT-415 is not on file, TDA sends a pending letter and will not issue the category until the training record is filed.
Step 3: How do you become a certified applicator?
The certified applicator license is the one that lets you supervise others, sign off on a company's work and serve as an RCA. It is also the license the law ties to restricted-use pesticides (Sec. 1951.302).
Ways to qualify for the exam
- Technician route: hold a technician license for at least six months and have worked doing pest control under a licensed certified applicator for at least 12 of the last 24 months.
- Degree route: an associate or bachelor's degree in a biological science, with an official transcript.
- Prior experience route: proof of at least 12 of the last 24 months of verifiable pest control employment, including out-of-state work, shown by a letter from the licensing agency stating the license type held and for how long.
- Noncommercial route: complete an SPCS-approved noncommercial applicator training course (for noncommercial certification).
Applying and testing
- Submit the Application for Certified Applicator Exam and License online or on paper, with the $125 license fee (unless already paid). Do not include exam fees. Metro Institute collects those.
- Wait for TDA's letter. It will either ask for more information or confirm eligibility and give scheduling instructions. Missing details such as the business account number delay processing.
- Schedule with Metro Institute, which has run TDA structural pest exams at sites across Texas since May 19, 2025.
- Pass the General Standards exam (listed as "G" on Metro's site) and at least one category exam, each with 70% or more correct.
Structural fumigation has an extra step. Candidates must send 40 hours of fumigation training to eligibility@texasagriculture.gov for prequalification. After approval, TDA sends an eligibility letter that lets you book the fumigation exam.
By law, TDA must give exam results within 30 days, and if you fail you can ask in writing for an analysis of your performance (Sec. 1951.405).
How long does it take?
The rules set the minimums, not a typical timeline. On the technician route, the 12-of-24-months work requirement means about a year at the earliest, and you must have held the technician license for six of those months. A person hired in January who finishes apprentice training and passes the technician exam by spring could qualify around the next January. The degree route can be faster because it does not require the technician license. Ask TDA SPCS at (866) 918-4481 how your own work history counts before you apply.
What are the seven Texas license categories?
TDA rule 4 TAC 7.124 sets seven categories. Each technician and certified applicator license lists the categories you passed, and a business can only sell work in categories where it has a certified applicator.
| Category | What it covers | Typical work |
|---|---|---|
| Pest Control | Pests in and around buildings that bother people or attack contents but not the structure | Roaches, ants, fleas, ticks, flies, mosquitoes, rats, mice, and nuisance animals such as skunks, raccoons and opossums |
| Termite and Wood Destroying Insect Control | Termites, beetles and other wood destroyers, and wood preservation without fumigation, including termites in trees near structures | Termite treatments, wood destroying insect reports for home sales |
| Lawn and Ornamental | Pests and diseases of trees, shrubs and plantings around homes, businesses, parks and streets | Lawn insect and disease programs, tree and shrub care |
| Weed Control | Weeds in rights-of-way, around homes, parks, businesses and industrial sites | Herbicide applications, commercial weed programs |
| Structural Fumigation | Fumigating structures not mainly used to hold food, feed or grain | Tent fumigation for drywood termites or bed bugs |
| Commodity Fumigation | Fumigating processed or raw commodities or the structures that hold them (not on-farm) | Warehouses, silos, shipping containers |
| Wood Preservation | Adding preservatives to wood products such as crossties, poles and posts | Utility pole retreatment |
Most residential route technicians start with Pest Control. Many companies in Houston and the Gulf Coast also want Termite, because wood destroying insect inspections are a large part of real estate work. Lawn and Ornamental plus Weed Control are the pair for a lawn care career.
Do you need a license to spray lawns in Texas?
Yes, if you are paid to apply pesticides or herbicides to lawns, trees or shrubs around homes and businesses, the work falls under the Structural Pest Control Act. Section 1951.003 covers pests and diseases of plantings adjacent to residences and businesses, and weeds are a listed pest. The Lawn and Ornamental and Weed Control categories exist for this work. A mowing crew that sprays weed killer for customers without a license is doing unlicensed pest control.
There are two narrow exceptions. A person treating their own home's yard needs no license. And a person treating growing plants who holds a TDA agricultural applicator license under Chapter 76 of the Agriculture Code that covers that work is exempt from Chapter 1951 (Sec. 1951.053). If you are unsure which license fits your lawn business, call TDA before you take paid jobs.
How much does a Texas pest control license cost in total?
TDA's fee schedule (in effect since January 1, 2016) is short. Here is what a typical career path costs in state fees alone.
| Item | Fee |
|---|---|
| Apprentice registration (and technician license) | $125 |
| Technician exam, per category | $64 |
| Technician license renewal | $125 per year |
| Certified applicator license, original | $125 |
| Certified applicator renewal | $125 per year |
| Certified applicator exams | Paid to Metro Institute; check current amount when you schedule |
| Commercial business license, original or renewal | $300 per location per year |
| Noncommercial business license | No fee (form SPC-402) |
| Late renewal, 90 days or less | 1.5 times the renewal fee |
| Late renewal, 91 days to one year | 2 times the renewal fee |
Example: a new technician testing in one category pays $125 plus $64, or $189 in TDA fees. Training courses, study manuals from Texas A&M AgriLife Extension, CEU classes and insurance are separate costs. Many employers pay the apprentice fee because the law requires the business to file it.
For a new business, the largest cost is usually not the $300 license. It is the liability insurance.
What insurance does a Texas pest control business need?
Here the statute and the rule say different things, and the rule controls in practice.
- The statute, Occupations Code Sec. 1951.312, sets a floor of $200,000 bodily injury and property damage coverage with a $300,000 aggregate, or a $300,000 bond or certificate of deposit.
- The TDA rule, 4 TAC 7.123, requires at least $500,000 bodily injury and property damage coverage with a $1,000,000 annual aggregate. TDA adopted it effective January 16, 2023, and fully enforced it starting January 1, 2024.
Plan on $500,000/$1,000,000. Proof must be filed on TDA's ALS-1101 insurance certificate (the revision dated 11/01/23 for policies effective on or after January 1, 2024). TDA accepts no other form. Tell your agent that the care, custody and control exclusion must be deleted to conform to Sec. 1951.312. If claims drop your aggregate below $1,000,000, the carrier must notify TDA within 10 business days.
Employers of noncommercial certified applicators, such as an apartment owner with an in-house licensed tech, must also file a $500,000/$1,000,000 policy. Government employers are exempt.
How do you start a pest control business in Texas?
- Get or hire a certified applicator. Every business license holder must employ a certified commercial applicator at all times and name one as the RCA. If you are not certified yourself, you need an employee who is, and that person cannot be RCA anywhere else.
- Set up the entity. The business license is tied to a tax ID. A sole proprietorship is tied to the owner's Social Security number. Changing the tax ID later means a new business license, and apprentices cannot transfer to it. TDA points owners to the Texas Secretary of State, the Comptroller, a CPA or an attorney for entity setup.
- Buy insurance at the $500,000/$1,000,000 level and have your agent file the ALS-1101.
- Apply for the commercial business license online with the $300 fee. Out-of-state owners must file a resident agent form.
- Wait for the license before you advertise, bid or treat. Advertising before licensure is a violation.
- Register every employee within 10 days of hire and report terminations within 10 days on form SPC-003. Licensed techs and applicators move to your license on form SPC-002.
- Use compliant paperwork. Contracts, warranties, service agreements, termite disclosures and guarantees must show the business name, license number, address, phone and the statement "Licensed and regulated by: Texas Department of Agriculture, P.O. Box 12847, Austin, TX 78711-2847, Phone (866) 918-4481" in at least 8-point type (4 TAC 7.145).
- Set up notices. Pre-construction termite treatments and structural fumigations must be reported through TDA's electronic notification system, required since January 9, 2018.
A separate business license is needed for each place of business, including each branch office. A company with offices in San Antonio and Austin needs two.
How many CEUs do Texas applicators need, and how do renewals work?
Certified applicator CEUs
- Two CEUs in general training each calendar year, with at least one in federal and state laws, pesticide safety, environmental protection or IPM.
- One CEU in each category you are certified in.
- None in the first calendar year your license is issued.
- CEUs count by calendar year (January 1 to December 31). If you renew in 2027, the CEUs must be from 2026.
- Live in-person and live interactive webinars count every year. Self-study (on-demand) online courses count only every other year.
- No course may be repeated for credit in the same year.
So a certified applicator holding Pest Control and Termite needs four CEUs a year: two general, one Pest Control and one Termite. TDA considers CEU extensions only for people who self-report the shortfall, and for documented medical hardship or military deployment. Use TDA's CEU Search page to find approved classes.
Renewal timing and late fees
Texas licenses expire on the last day of the month in which they originally expired. A certified applicator's license expires each year with the business license it is issued under. Inactive certified applicator and technician licenses get renewal notices in early November with a December 31 due date.
For businesses, current insurance and the renewal fee must reach TDA by the expiration date. If either is late, the license expires. It can still be renewed up to one year after the expiration date, with late fees of 1.5 times the fee within 90 days or 2 times from 91 days to a year. Paying the late fee does not let you operate. You must wait until the renewed license is issued.
Does a criminal record stop you from getting a Texas pest control license?
Not automatically. SPCS performs a criminal background review on apprentice, technician and certified applicator applicants. Texas licensing agencies follow Chapter 53 of the Occupations Code, which says an agency may act on a conviction for an offense that directly relates to the occupation, certain listed offenses, or a sexually violent offense (Sec. 53.021). Deferred adjudication generally is not treated as a conviction, with exceptions. In deciding whether a crime relates to the job, the agency weighs factors such as the nature and seriousness of the crime and its relationship to the purposes of the license (Sec. 53.022). Before denying you, it must give written notice of the reason and at least 30 days to submit information (Sec. 53.0231).
TDA asks applicants with a record to send supporting documents, including:
- Proof you completed probation or parole.
- A statement that court costs, fines and restitution are paid or on track.
- At least one recommendation letter from a law enforcement official or another person (not an employer) who knows your current conduct.
- A signed, dated statement describing the crime, your age at the time, the sentence, any incarceration and release date.
- Evidence of steady work, support of dependents and good conduct since.
- A letter from your employer saying it knows about your record.
If you are planning to take the exam and think your record may make you ineligible, Sec. 53.102 lets you ask the agency for a criminal history evaluation letter first. The agency must answer within 90 days (Sec. 53.104). This is general information, not legal advice. If your case is complicated, talk to a Texas attorney before you pay for training.
Can an out-of-state license transfer to Texas?
Partly. Section 1951.306 lets TDA waive license requirements for someone licensed in a state with substantially equivalent requirements, sign reciprocal agreements, and issue an endorsement to a new Texas resident who qualified as a certified applicator by exam in another state. In practice, TDA's certified applicator page accepts out-of-state experience as one route to the exam: 12 of the last 24 months of pest control work, shown by a letter from your old state's licensing agency stating your license type and how long you held it. TDA's "Guidance for Applicators Moving to Texas" page sits behind a login, so we could not confirm which states, if any, have current reciprocity. Call SPCS at (866) 918-4481 before you move. Coming from Florida? See our Florida license guide for how that system differs.
What happens if you do pest control without a license in Texas?
Violating the Act is a Class C misdemeanor, or Class B for a repeat offense, and each day is a separate offense. TDA can also seek a civil penalty of $50 to $2,000 per act and per day. Penalties go to the state General Revenue Fund. Anyone can report unlicensed work to TDA SPCS at (866) 918-4481 or SPCS@TexasAgriculture.gov, and TDA can open an investigation from an oral or written report. Homeowners can check a company or applicator through TDA's license search before hiring. See our Texas pest control guide for consumer rights.
How to choose a provider
- Find a TDA-licensed employer and confirm they will register you within 10 days of your start date.
- Get a copy of your Verifiable Training Record and track your 20 general, 8 classroom and 40 on-the-job hours.
- Sign up for an SPCS-approved Technician Training Course early.
- Buy study manuals from Texas A&M AgriLife Extension for your category.
- File the technician exam application and book Metro Institute well before month 12.
- After six months as a technician with 12 of 24 months supervised work, apply for certified applicator.
- If you have a criminal record, gather TDA's listed documents or request a Chapter 53 evaluation letter first.
- Earn your CEUs by December 31 each year after your first year.
- Business owners: name an RCA, file ALS-1101 insurance at $500,000/$1,000,000, and wait for the license before advertising.
- Put the TDA jurisdiction statement on every contract and guarantee.
Related pest control guides
- How Do You Get a Florida Pest Control License? Certified Operator, ID Card Holder and Business License
- How Much Do Pest Control Technicians Make in Texas and Florida, and Is It a Good Career?
- Commercial Pest Control for Offices, Warehouses, Retail and Medical Facilities: What Texas and Florida Buyers Need to Know
- How Should Apartment Communities Handle Pest Control? Unit Turns, Bed Bug Policies and Resident Notices in Texas and Florida
- Pest Control in Schools and Daycares: What Do Texas IPM Rules Require, and What Does Florida Do?
Pest control by state and city
Questions people ask
How do I get a pest control license in Texas?
Get hired by a licensed pest control company or noncommercial employer, which registers you as an apprentice within 10 days ($125). Complete 20 hours of general classroom training, 8 classroom hours and 40 on-the-job hours per category, and an approved Technician Training Course. Then pass the technician exam ($64 per category) through Metro Institute before your 12-month apprentice card expires. After six months as a technician and 12 of 24 months of supervised work, you can test for certified applicator.
What is the difference between a technician and a certified applicator in Texas?
A technician treats pests only under the direct supervision of a certified applicator and must meet that person in person once a week. A certified applicator is responsible for the work, can train and supervise apprentices and technicians, is the license tied to restricted-use pesticides, and can serve as a company's Responsible Certified Applicator. Certified applicators pass a General Standards exam plus a category exam at 70% or higher.
Where do I take the Texas structural pest control exam?
Since May 19, 2025, Metro Institute gives TDA structural pest control exams at testing sites across Texas. You first apply to TDA and pay the license fee. After TDA sends your account or approval number, you register on Metro's website. Certified applicator exam fees are paid to Metro, not TDA.
What score do I need to pass?
Certified applicator candidates must score 70% or higher on the General Standards exam and on at least one category exam. Technicians can retake exams as many times as needed within their 12-month apprentice period. If you fail, you can ask TDA in writing for an analysis of your results.
Can I work as an apprentice right away?
Yes, once your employer registers you, but you cannot work alone. Until you finish the required general and category training, a licensed applicator must be physically present. After training, you may treat in that category under a certified applicator's direct supervision, with the certified applicator physically present at least three days a week.
Do noncommercial licenses cost money?
A noncommercial business license has no TDA fee, but you must file form SPC-402 and the employer must carry $500,000/$1,000,000 insurance on the ALS-1101 form, unless it is a government entity. Individual noncommercial technicians and certified applicators pay the same apprentice, exam and license fees as commercial ones.
Do technicians need continuing education in Texas?
Yes. Licensed technicians must complete eight hours of verifiable general standards training each calendar year, and two of those hours may be on-the-job. The training is recorded on a prescribed form and checked at each annual renewal. Records must be kept in the business file for at least two years after the technician leaves.
Can I own a pest control company without being certified myself?
Yes. Texas requires the business to employ a certified commercial applicator at all times and name one as Responsible Certified Applicator, but the owner does not have to be that person. The RCA can be the RCA for only one business location. Without an RCA the business cannot operate, except under a temporary hardship requested within 20 business days.
How long is a Texas pest control license good for?
Licenses renew yearly. They expire on the last day of the month of the original expiration date, and applicator and technician licenses follow the expiration of the business they are tied to. Business licenses can be renewed up to one year after expiring, with late fees of 1.5 or 2 times the normal fee.
Does the 2023 rule change affect people already licensed?
Yes. The 2023 rules took effect January 16, 2023. Two parts were phased in on January 1, 2024: the $500,000/$1,000,000 insurance minimum for businesses, and the requirement that licensed technicians complete 40 hours of on-the-job and 8 hours of classroom training (filed on form SPT-415) before adding a category.
Sources
- Texas Occupations Code ch. 1951, Structural Pest Control
- Texas Occupations Code ch. 53, Consequences of Criminal Conviction
- TDA Structural Pest Control Service (updates, Metro Institute, notifications)
- TDA SPCS Technician and Apprentice Licensing
- TDA SPCS Certified Applicator Licensing
- TDA SPCS Fees
- TDA Structural Pest Control Business
- 4 Tex. Admin. Code 7.123, Insurance and Other Security Requirements
- 4 Tex. Admin. Code 7.124, License Categories
- 4 Tex. Admin. Code 7.145, Contract and Jurisdiction Statement
- TDA SPCS rule adoption, Texas Register, January 13, 2023
- TDA SPCS Complaint Process
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


