Local Guide · Swimming pool builders and contractors
Pool Drain Safety: What Is the Virginia Graeme Baker Act and Is Your Drain Cover Safe?
The federal Virginia Graeme Baker Act sets the drain cover standard for every pool and spa sold in the U.S. and adds extra rules for public pools. Here is how entrapment happens, how to read your cover, and who enforces the rules in Texas and Florida.
The Virginia Graeme Baker Pool and Spa Safety Act (15 U.S.C. 8001 et seq.) is a 2007 federal law that took effect December 19, 2008. It requires every drain cover sold in the U.S. to meet an anti-entrapment standard, now ANSI/APSP/ICC-16 2017 under 16 CFR 1450. Public pools, including apartment, HOA and hotel pools, must have compliant covers, and those with a single blockable main drain need a backup such as a safety vacuum release system. Backyard pools are reached through the cover standard and local codes.
Key facts
- The VGB Act was signed December 19, 2007 and took effect December 19, 2008 (poolsafely.gov).
- Since a 2019 CPSC rule, 16 CFR 1450.3 requires drain covers to meet ANSI/APSP/ICC-16 2017, which replaced ASME/ANSI A112.19.8.
- Under 15 U.S.C. 8003, public pools with a single main drain (other than an unblockable drain) need at least one added system: SVRS, suction-limiting vent, gravity drainage with collector tank, automatic pump shut-off, drain disablement or an equal system.
- CPSC staff counted 11 circulation entrapment victims from 2014 through 2018: 2 deaths and 9 injuries, all under age 15; 7 involved spas and 6 were hair entrapments.
- Drain covers have a service life of 5 to 7 years depending on the model, marked on the cover as "Life: X Years" (Nebraska Department of Water, Energy and Environment).
- Florida Statute 514.0315 requires an anti-entrapment system or device on every public pool and spa; DOH rule 64E-9.017 lets inspectors close a pool with a missing, broken or noncompliant drain cover.
- Texas DSHS rule 25 TAC 265.181 adopts ANSI/APSP-16 and ANSI/PHTA/ICC-7 entrapment standards for commercial pools, and Texas law requires public pool standards at least as strict as the VGB Act.
- The Florida Building Code, Residential R4501.6.6 requires suction-outlet entrapment protection per ANSI/PHTA/ICC 7 on private pools.
What is the Virginia Graeme Baker Act?
The Virginia Graeme Baker Pool and Spa Safety Act is a federal law passed by Congress and signed on December 19, 2007. It took effect one year later, on December 19, 2008. The U.S. Consumer Product Safety Commission (CPSC) enforces it. The law lives at 15 U.S.C. 8001 and the sections after it, and the CPSC rule that carries it out is 16 CFR part 1450.
The law is named for Virginia Graeme Baker, a 7-year-old who died after the suction of a hot tub drain held her underwater. A Nebraska state pool program summary notes she was a strong swimmer but could not pull free of an estimated 700-plus pounds of suction, and it took two men to free her, breaking the drain cover in the process. Her family pushed for national drain cover standards.
The Act does three main things:
- Sets a national drain cover standard. Every pool or spa drain cover made, sold or brought into commerce in the U.S. must meet an anti-entrapment performance standard. The statute named ASME/ANSI A112.19.8 "or any successor standard."
- Adds equipment rules for public pools and spas. Every public pool and spa must have compliant anti-entrapment devices, and many need a second layer of protection (explained below).
- Funds state programs and education. CPSC runs the Pool Safely campaign and a grant program that helps states and local governments pay for enforcement and education.
Violating the public pool equipment rule is treated as a violation of the Consumer Product Safety Act, so CPSC can use its federal enforcement tools.
What is drain entrapment? The five types
Entrapment happens when the suction of a pool's water circulation system holds a person, or part of a person, against a drain or other suction outlet. The pump pulls water out through drains and skimmers. If a body, limb or hair blocks a drain, the suction can build until the person cannot get loose.
CPSC staff use five categories that come from the industry's suction entrapment standard:
| Type | What happens | Typical setting |
|---|---|---|
| Hair | Hair is pulled into and tangled in an outlet cover. | Spas and hot tubs, where people often lie back near a drain |
| Limb | An arm, hand, leg or foot is sucked into or inserted into an open sump or pipe. | Pools or spas with a missing or broken cover |
| Body | Suction holds a large part of the body, such as the back, hip, abdomen or shoulder. | Small, flat drains that a body can cover |
| Evisceration | Suction is applied directly to the intestines, for example when a child sits on an open drain. | Wading pools and spas with open or broken drains |
| Mechanical | Jewelry, a swimsuit string or a finger or toe is caught in the cover. | Covers with openings that can snag |
The good news is that these events are now rare. In its May 2019 report, CPSC staff counted 11 victims of circulation entrapment from 2014 through 2018: 2 deaths and 9 injuries. Every victim was younger than 15. Seven of the 11 involved spas, and hair was the most common type (6 victims), followed by limb (4) and body (1). Four victims were hurt because an outlet cover was missing or removed. The same report notes that since the Act took effect in December 2008, CPSC staff had no reported deaths of a child entrapped on a suction outlet cover in a public pool or spa. The incidents split between homes and public places, with roughly half in each setting.
The lesson from the numbers: most modern incidents involve spas, hair, and covers that are missing, broken or not installed correctly.
Does the VGB Act apply to residential pools?
Partly. The answer depends on which part of the law you mean.
- Drain covers: yes. The cover standard applies to every drain cover "manufactured, distributed, or entered into commerce in the United States." That includes covers sold for backyard pools and hot tubs. When you or a technician buy a replacement cover today, it must meet the federal standard.
- Extra equipment rules: public pools only. The requirement to add a safety vacuum release system or similar backup on a single blockable drain applies to public pools and spas.
- Local codes fill the gap. State and city building codes apply entrapment rules to new private pools. The Florida Building Code, Residential section R4501.6.6 requires entrapment protection for suction outlets per ANSI/PHTA/ICC 7. In Texas there is no statewide residential pool code, but Houston and Dallas have adopted the 2021 International Swimming Pool and Spa Code (ISPSC) and San Antonio and Austin the 2024 ISPSC. The ICC notes that ISPSC Section 310 incorporates the ANSI/APSP/ICC-7 suction entrapment standard.
Which pools count as "public" under federal law?
Under 15 U.S.C. 8003, a public pool or spa is one that is:
- open to the public, free or for a fee;
- open only to members of an organization and their guests;
- open to residents of an apartment building, apartment complex, residential real estate development or other multifamily area (other than a city or local government);
- open to patrons of a hotel or other lodging; or
- operated by the federal government for service members, employees and their families.
So your HOA pool, condo pool, apartment pool and hotel pool are public pools under the VGB Act, even if the public cannot walk in. Board members and property managers carry real compliance duties. See our guide to HOA, condo and apartment pool management.
What is a VGB-compliant drain cover?
A compliant cover is one that has been tested and certified to the current federal standard. Since a CPSC rule published May 24, 2019 (84 FR 24027), 16 CFR 1450.3 requires covers to meet ANSI/APSP/ICC-16 2017, the American National Standard for Suction Outlet Fitting Assemblies (SOFA) for Use in Pools, Spas and Hot Tubs. It is the successor to ASME/ANSI A112.19.8, the standard named in the original law, and to ANSI/APSP-16 2011.
The Nebraska Department of Water, Energy and Environment's pool program explains what the standard covers. A suction outlet fitting assembly includes the sump, body, cover or grate, and hardware, not just the plastic lid you see. The cover is tested under specific conditions: whether it sits on the floor or wall, how deep the sump is, and how much water flows through it. If any of those conditions do not match how it was installed, the cover does not meet the standard and may not be safe.
How to read the markings
- Standard stamp. Older compliant covers say "VGB-2008," "ASME/ANSI A112.19.8-2007" (or -2008 or 2009b) or "ANSI/APSP-16 2011." Newer ones say "ANSI/APSP/ICC-16 2017" or "VGBA-2017."
- Colored dot. Some, not all, covers have a dot on top. A light blue or green dot means an older generation; a dark blue dot means the cover passed the newer standard.
- Service life. Marked as "Life: X Years."
- Flow rating. The maximum flow in gallons per minute the cover is rated for, which may differ by floor or wall mounting and sump depth.
- Certificate. The cover should come with a certificate of compliance listing its specifications and the standard it was tested to.
Covers made before the newer standard took effect stay legal until the end of their marked service life. After that, they must be replaced.
Field-fabricated covers
Large commercial drains sometimes use custom covers built on site. Nebraska's guidance says these need a certification from a professional engineer or registered design professional stating they meet the standard, including flow rate, UV exposure and durability.
Do drain covers expire?
Yes. This surprises many owners. According to the Nebraska pool program, drain covers have a service life of 5 to 7 years, depending on the manufacturer and model. The clock starts the month and year the cover is installed, whether or not the pool has water in it.
Why they expire: pool chemicals and, outdoors, sunlight make plastic brittle over time. A cover that looks fine can crack under a child's weight or snap when someone pulls on it. Stainless steel covers expire too, because chloride in pool water attacks the protective layer on stainless steel and causes pitting corrosion.
If your cover is past its service life, replace it with a compliant cover as soon as possible, following the manufacturer's instructions. Nebraska's guidance also says:
- Replace with the same make and model when you can, but check the flow rating. Covers made after 2021 may have different flow ratings even if the model name is the same.
- Inspect the whole assembly: frame, sump, screws, plaster ring and spacers.
- Do not reuse old screws. Use the hardware that comes with the new cover.
- Tighten screws by hand, not with a power drill, to avoid stripping threads.
- Keep the instructions and certificate in your records.
For a Florida example of why this matters: DOH rule 64E-9.017 lets inspectors close a public pool when a main drain cover is missing, unsecured, damaged or does not meet the rule's requirements. Florida rule 64E-9.008 also requires all safety features to be tested and replaced when necessary according to the manufacturer's specifications.
How do I check my drain cover? A homeowner's 10-minute inspection
You can do a basic visual check yourself. If anything looks wrong, close the pool or spa until a licensed pro fixes it.
- Turn off the pump at the timer or breaker before you reach near a drain. Never put a hand near a drain with the pump running.
- Look at the main drain(s) on the pool floor and any drains in the spa. In a spa, look at the seat walls and footwell too.
- Check that every cover is present and screwed down. A cover that lifts, rocks or is missing a screw is an emergency, not a to-do item.
- Look for cracks, chips, warping or faded, chalky plastic.
- Read the stamp. Use a mask and snorkel or ask your pool tech to read the standard name, flow rating and service life.
- Find the install date. Look in your records, the permit file or the label some newer covers include for an equipment room log. Covers made before May 24, 2021 were not required to include that label.
- Count your drains. Two drains connected to the same suction line, spaced apart, or no main drain at all, lowers risk. A single small drain on a dedicated pump line is the setup to ask about.
- Check the spa. Spas run high flow through small spaces. Make sure jets and suction fittings are covered and that kids keep long hair tied up.
Write down what you find with the date. If you sell the home, an inspector or buyer may ask. Our buying a home with a pool guide lists what to ask the seller.
Single main drains, dual drains and drainless pools
Federal law defines a main drain as "a submerged suction outlet typically located at the bottom of a pool or spa to conduct water to a recirculating pump." An unblockable drain is "a drain of any size and shape that a human body cannot sufficiently block to create a suction entrapment hazard."
A single main drain is dangerous because if a body blocks it, all of the pump's suction is focused on that one point. When there are two or more drains on the same line spaced apart, a person usually cannot block both at once, so water keeps flowing through the other drain and the suction on the person stays limited.
Do you need two main drains? For a public pool with a single drain that can be blocked, federal law requires at least one backup system (listed in the next section). For new pools, codes and standards often lead designers to use split drains or unblockable drains. Exact rules depend on your code edition, so ask the designer how the plan meets ANSI/PHTA/ICC-7.
Drainless pools. Some designers skip the main drain entirely. A 2020 article in the ICC's Building Safety Journal notes that drains are not required in residential pool standards and argues that "eliminating main drains in pools will eliminate suction entrapment hazards." Without a floor drain, water circulates through skimmers and returns. Ask your builder whether a drainless design fits your pool's shape and depth.
What is a safety vacuum release system (SVRS) and the other backup systems?
Under 15 U.S.C. 8003, every public pool or spa with a single main drain that is not unblockable must have at least one of these:
| System | How it works | Notes |
|---|---|---|
| Safety vacuum release system (SVRS) | Senses the sudden vacuum when a drain is blocked and stops the pump, reverses flow or otherwise releases the vacuum. | Must be third-party tested to ASME/ANSI A112.19.17 or ASTM F2387. |
| Suction-limiting vent | A vent pipe open to the air lets air into the suction line when a drain is blocked, breaking the suction. | Needs a tamper-resistant atmospheric opening. |
| Gravity drainage system | Water flows by gravity from the pool into a collector tank; the pump draws from the tank, not the pool. | Florida DOH says all new public pools and spas must use this. |
| Automatic pump shut-off | Shuts the pump off when a blockage is detected. | |
| Drain disablement | A device or system that disables the drain. | |
| Other approved systems | Any system CPSC finds equally effective or better. |
An SVRS is a good backup, but it does not stop hair or mechanical entrapment, because those can happen without a full vacuum. That is why a compliant, correctly installed cover always comes first.
Who enforces drain safety for public pools in Florida?
In Florida, the Department of Health (DOH) enforces public pool safety under Chapter 514, Florida Statutes, and rule chapter 64E-9 of the Florida Administrative Code. County health departments do the inspections and issue operating permits.
- Statute 514.0315 requires every public pool and spa to have an anti-entrapment system or device that meets ASME/ANSI A112.19.8 "or any successor standard." The statute still uses the old standard name; the federal successor is ANSI/APSP/ICC-16 2017.
- Pools built before January 1, 1993 with a single main drain (other than an unblockable drain) must add an SVRS, suction-limiting vent, gravity drainage with collector tank, automatic pump shut-off or drain-disabling device. These must be installed by a licensed pool contractor under 489.105(3)(j), (k) or (l).
- New public pools and spas must use gravity drainage with a collector tank, DOH says.
- Form DH 4157. Rule 64E-9.008 requires the owner or operator to file Form DH 4157, Pool Owner/Operator Verification of Entrapment Safety Features, when a safety feature changes.
- Annual vent testing. An existing pool with a suction-limiting vent system must have it tested every year by a licensed pool contractor or Florida-licensed professional engineer, with results sent in with the operating permit renewal.
- Closure triggers. Rule 64E-9.017 lets DOH close a pool if any part of the anti-entrapment system is missing or not working, a drain cover is missing, loose, damaged or noncompliant, or there is direct suction on a main drain. Water must also be clear enough to see the main drain grate from the deck.
Small condo and HOA pools: pools serving 32 or fewer condo or cooperative units, and HOA pools with 32 or fewer units or parcels, are exempt from most DOH supervision, but HOA pools in that group still must follow the 514.0315 entrapment rules. DOH can fine up to $500 per violation per day. For the full rule set, see Florida public pool rules (64E-9).
Who enforces drain safety for public pools in Texas?
In Texas, the Department of State Health Services (DSHS) writes minimum standards for public pools under Health and Safety Code chapter 341, and counties and cities issue permits and inspect.
- State law floor. Health and Safety Code 341.0645 requires Texas pool safety standards to be at least as stringent as the federal VGB Act.
- DSHS rules. 25 TAC 265.181 adopts by reference the 2021 ISPSC for construction and repair of commercial pools and spas, plus ANSI/APSP-16 (suction outlet fitting assemblies) and ANSI/PHTA/ICC-7 (suction entrapment avoidance). The DSHS definitions in 25 TAC 265.182 describe the VGB Act as requiring covers to meet those standards.
- Which pools. DSHS rules cover Class A (competition), Class B (open to the general public) and Class C pools (limited to residents, members or guests, such as apartments, HOAs and hotels). They do not adopt the ISPSC chapters on backyard pools.
- Local enforcement. Counties and cities may require operating permits, inspect, charge fees and close pools that do not comply. In Houston, Dallas, San Antonio and Austin, check with the city health department or code office for local inspection practices.
For more, see Texas public pool rules (DSHS).
Are spa and hot tub drains a special hair entrapment risk?
Yes. In CPSC's 2014-2018 data, spas accounted for 7 of 11 victims, and 4 of the 7 spa victims had hair entrapments. Spas move a lot of water through small, shallow spaces, and people sit or lie close to the suction fittings.
Steps that cut the risk:
- Tie up or tuck in long hair, and teach kids not to put their heads underwater in a spa.
- Never let anyone play with or sit on a drain or suction fitting.
- Know where the emergency shut-off switch is. Public spas usually have one in sight of the spa.
- Check spa covers for cracks and service life every season.
- Make sure portable hot tubs have intact suction covers before every use.
Our hot tub and spa guide covers spa temperatures and other safety rules.
Who can replace a drain cover or add an SVRS in Texas and Florida?
Florida. Replacing pool equipment, including permanently attached equipment, generally falls within licensed pool contracting under 489.105, which covers commercial pool/spa, residential pool/spa and swimming pool/spa servicing contractors. Routine cleaning does not need a license. For public pools, safety features on pre-1993 single-drain pools must be installed by one of those licensed contractors. Look up a license on DBPR's MyFloridaLicense.com. See our Florida pool contractor license guide.
Texas. Texas has no statewide pool contractor license, so the rules come from your city and from trade licenses. If an SVRS or pump shut-off needs electrical work, Texas Occupations Code ch. 1305 requires a TDLR-licensed electrician or, for some pool-related connections, a licensed residential appliance installer. See our Texas pool builder license guide.
Many drains sit at the bottom of a deep pool, and some replacements require partly draining the pool. That adds its own risks, especially in Florida's high water table areas, where hydrostatic pressure can lift an empty pool. Hire a pro for any drain work below the waterline.
How to choose a provider
- Turn off the pump before inspecting any drain or suction fitting.
- Confirm every drain cover is present, screwed down and free of cracks.
- Read the cover stamp: standard name, flow rating and "Life: X Years."
- Record the install month and year; replace before the service life ends.
- Use the manufacturer's new screws and tighten by hand.
- Check that a replacement cover's flow rating fits your pump's flow and sump depth.
- Ask whether your pool has a single blockable drain, split drains or no main drain.
- For HOA, condo, apartment and hotel pools, confirm the backup system required by 15 U.S.C. 8003.
- Florida public pools: file Form DH 4157 when a safety feature changes and test vent systems yearly.
- Teach kids to stay away from drains and to tie up long hair in spas.
- Post the location of the emergency pump shut-off where adults can see it.
- Keep all drain cover certificates and instructions with your pool records.
Related swimming pool builders and contractors guides
- Hot Tubs and Spas in Texas and Florida: What Do They Cost, and What Rules Apply?
- What Are Florida's Public Pool Rules Under Chapter 514 and Rule 64E-9?
- What Are Texas Public Pool Rules for HOA, Apartment and Hotel Pools (25 TAC 265)?
- How Do You Run an HOA, Condo or Apartment Pool in Texas or Florida?
- Pool Alarms, Safety Covers and Door Alarms: Which Layers of Protection Work?
- Pool Electrical Safety and Bonding: What Do NEC Article 680, GFCI and Bonding Mean for Your Pool?
- Buying a Home With a Pool: Inspection Checklist, Permits, Barriers and Red Flags
Swimming pool builders and contractors by state and city
Questions people ask
Is it illegal to have an old drain cover on my backyard pool?
Federal law requires covers sold in the U.S. to meet the standard, and public pools must have compliant covers. For a backyard pool, there is usually no inspector checking an existing cover, but an expired or broken cover is a real danger. Florida's building code and Texas city codes apply entrapment rules to new private pools and many remodels. Replace any cover past its marked service life, and close the pool right away if a cover is cracked, loose or missing.
How much does a replacement drain cover cost?
The cover itself is a small part, but labor varies a lot depending on whether a diver can swap it underwater or the pool must be partly drained, and whether the sump or frame also needs work. We did not find a dated, named cost study for this job in Texas or Florida, so get two written quotes from licensed pros. Ask each to confirm the new cover's flow rating matches your pump and sump depth.
Does a safety vacuum release system replace the need for a good drain cover?
No. An SVRS reacts when a blocked drain creates a strong vacuum. Hair and jewelry entrapment can happen without that kind of vacuum, so an SVRS may not trigger. Federal law treats a compliant cover as the first requirement and the SVRS or similar system as a backup for single-drain public pools.
What should I do if someone is stuck on a pool drain?
Shut off the pump immediately at the emergency switch, timer or breaker, and call 911. Do not try to pry the person off while the pump runs, because the suction may be too strong. Once the pump is off, the suction should release. Start CPR if the person is not breathing and you are trained. Afterward, keep the pool closed until a professional inspects the drain system.
What does ANSI/APSP/ICC-16 2017 mean on my drain cover?
It is the current American National Standard for suction outlet fitting assemblies in pools, spas and hot tubs. Since a 2019 CPSC rule, it is the standard federal law requires. It replaced ASME/ANSI A112.19.8 and ANSI/APSP-16 2011. A stamp showing it, or "VGBA-2017," means the cover was tested to the newer rules. Older stamps are still legal until the cover's service life runs out.
Do HOA and condo pools in Florida have to meet the VGB Act?
Yes. Federal law treats pools open only to residents of a residential development or multifamily area as public pools. In Florida, HOA pools with 32 or fewer units or parcels are exempt from most DOH supervision but must still meet the entrapment rules in Statute 514.0315. Larger HOA and condo pools need a DOH operating permit and inspections.
Is a vinyl or fiberglass pool safer from entrapment than concrete?
The pool's shell material does not decide entrapment risk. The number and layout of suction outlets, the cover rating, the pump's flow and whether covers are present and in good shape matter much more. Any pool type can be built with split drains, unblockable drains or no main drain.
Can a pool service technician check my drain covers?
Yes, and it is a good idea to ask at least once a year. In Florida, replacing permanently attached pool equipment requires a licensed pool contractor; in Texas, ask what license or local registration the company holds. Ask the technician to write down the cover's standard, flow rating and remaining service life on the service report.
Sources
- Pool Safely: Virginia Graeme Baker Pool and Spa Safety Act (CPSC)
- 15 U.S. Code 8003: Federal swimming pool and spa drain cover standard (Cornell LII)
- 15 U.S. Code 8002: Definitions (Cornell LII)
- 16 CFR Part 1450: Virginia Graeme Baker Pool and Spa Safety Act Regulations (eCFR)
- CPSC: 2014-2018 Reported Circulation/Suction Entrapment Incidents, 2019 Report
- Nebraska DWEE Swimming Pool Program: VGBA Drain Cover/SOFA Safety FAQ (2024)
- ICC Building Safety Journal: Drainless is the future (March 9, 2020)
- Florida Statutes Chapter 514 (2026), including 514.0315
- Florida DOH: Swimming Pools
- Rule 64E-9.008, F.A.C.: Supervision and Safety
- Rule 64E-9.017, F.A.C.: Pool Closure
- Florida Building Code, Residential 2023 Chapter 45: Private Swimming Pools
- Fla. Stat. 489.105 Definitions (2026)
- 25 TAC 265.181: General Provisions, Texas public pools
- 25 TAC 265.182: Definitions, Texas public pools
- Texas Health and Safety Code Chapter 341
- Texas Occupations Code Chapter 1305: Electricians
- Houston Code Development (2021 ISPSC adoption)
- Dallas: Know the Code
- San Antonio DSD: Codes and Ordinances
- Austin: Building Technical Codes
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


