New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · AC and heating

Is My AC Low on Freon? Refrigerant Leaks and Recharges Explained

Refrigerant is not used up, so 'low on Freon' means a leak. Here is how leaks are found and fixed, what federal law requires, why R-410A, R-454B and R-32 cannot be mixed, what EPA's May 2026 rule changed, and how to decide between repair and replacement.

An AC that is low on refrigerant has a leak or was undercharged, because refrigerant circulates in a sealed loop and is not consumed. Signs include weak cooling, long run times, ice on the copper line, hissing and higher bills. Only an EPA Section 608 certified technician may buy and add refrigerant, and venting it is illegal. A recharge without a leak repair is temporary. Refrigerants cannot be mixed: an R-410A system must be serviced with R-410A, never R-454B or R-32.

Key facts

  • Only EPA Section 608 certified technicians, or employers who employ one, may buy refrigerant for stationary AC; Section 609 auto certification does not qualify (EPA).
  • Federal rules prohibit knowingly venting refrigerants while servicing, repairing or disposing of AC equipment (EPA).
  • EPA's Section 608 leak repair requirements apply to appliances with 50 or more pounds of ozone-depleting refrigerant, so typical home systems fall below the threshold (EPA).
  • U.S. production and import of R-22 ended Jan. 1, 2020; existing R-22 systems may still be serviced with recovered, reclaimed or pre-2020 R-22 (EPA).
  • New residential AC and heat pump systems must use refrigerant with a GWP of 700 or less from Jan. 1, 2025; R-410A has a GWP of 2,090 (EPA).
  • EPA's May 26, 2026 final rule, effective July 27, 2026, removed the installation deadline for residential equipment made or imported before Jan. 1, 2025 (EPA, Federal Register).
  • EPA said in the 2026 rule that R-410A for recharging legacy systems is likely to rise in price as the HFC phasedown continues; HFC production and consumption fall to 30% of baseline in 2029 (EPA).
  • R-454B (GWP 470) and R-32 (GWP 675) are ASHRAE A2L, mildly flammable, and are listed by EPA for new residential systems with use conditions (EPA SNAP).
  • EPA warns that 'R-22a' is a flammable propane and butane blend falsely marketed as an R-22 replacement (EPA).

Refrigerant 101: why 'low on Freon' means a leak

Refrigerant is the fluid that carries heat out of your house. It boils into a vapor in the indoor coil, absorbing heat, then the compressor pumps it outside, where it gives off heat in the outdoor coil and turns back to liquid. It goes around and around in a sealed loop of copper and aluminum tubing.

Nothing in that loop burns or uses up refrigerant. So if a system is low, one of two things happened: it was not charged correctly at installation or after a repair, or it is leaking. A system that needs refrigerant every summer has a leak, no matter what anyone says.

Freon is a brand name that people use for any AC refrigerant, but it is mostly associated with R-22, the refrigerant in older systems. Most systems installed from roughly the 2010s through 2024 use R-410A. New systems installed since 2025 use lower-impact refrigerants such as R-454B or R-32. EPA notes most AC units have a nameplate that identifies the refrigerant they use. Check the data plate on your outdoor unit.

How do I know if my AC is low on refrigerant?

Lennox lists these signs of a refrigerant leak:

  • Hissing or bubbling from the lines or coils.
  • Weaker cooling. Air from vents is less cold, so the system runs longer.
  • Higher humidity indoors.
  • Higher electric bills.
  • Frozen coils or ice on the copper line.
  • A chemical or exhaust-like odor, which can mean a significant leak. Turn the unit off and call a professional.

Other clues are a system that slowly loses ground over weeks, oily residue on copper fittings (refrigerant carries oil), and a low-pressure safety that shuts the system off. None of these alone proves a leak. A dirty filter or failed blower can also cause ice and weak cooling, so rule those out first. Our warm air guide walks through the order.

Where AC refrigerant leaks happen

Leak locationWhy it leaksTypical repair
Indoor evaporator coilCorrosion in the tubing, including pinhole corrosion; vibration; manufacturing defectsCoil replacement is common; small accessible leaks can sometimes be brazed
Outdoor condenser coilSalt-air and chemical corrosion, physical damage, hail, lawn equipmentCoil or condenser replacement; accessible spots can be brazed
Service valves and Schrader coresWorn valve cores, missing or loose capsReplace cores and caps; inexpensive
Brazed joints and fittingsPoor brazing, vibration over timeRe-braze
Line set between indoor and outdoor unitsRubbing on framing, kinks, damage during other work, buried linesRepair section or replace line set
Flare connections on mini-splitsImproperly made or loosened flaresRemake flare

Coastal homes in Miami, Tampa Bay, Jacksonville and the Texas Gulf Coast see more outdoor coil corrosion because of salt air. See our coastal corrosion guide.

Formicary corrosion

Formicary corrosion is the industry name for tiny, branching pinhole leaks that form inside the walls of copper coil tubing. It is widely associated with organic acids from certain household chemicals and building materials reacting with copper in a damp coil. Leaks are often very small and hard to find. If a technician tells you the indoor coil has "pinhole" or formicary leaks, ask for the location in writing and check whether the coil is still under the manufacturer's parts warranty. Coverage for corrosion varies by manufacturer and warranty terms, so read the warranty or call the manufacturer with your serial number.

How HVAC technicians find refrigerant leaks

A real leak search is more than adding refrigerant and waiting to see if it disappears. Common methods include:

  • Electronic leak detectors that sniff for refrigerant around coils, joints and valves.
  • Bubble solution brushed onto suspected joints and valves.
  • Nitrogen pressure testing: the refrigerant is recovered, the system is pressurized with dry nitrogen, and the technician watches for pressure loss and listens or bubbles for the leak. It can isolate the indoor coil from the outdoor unit.
  • UV dye added to the system and found with an ultraviolet light, where the manufacturer allows it.
  • Standing vacuum test after repairs, to confirm the system holds before recharging.

Ask what method was used, where the leak is, and whether the technician could confirm it. Some leaks, especially in indoor coils, are found only by testing sections separately. If the technician cannot find the leak, ask what the plan is; adding refrigerant may be a reasonable short-term step on an old system, but you should know you are paying for a temporary fix.

What federal law says about refrigerant work

  • Certification: Under Clean Air Act Section 608, technicians who service, repair or dispose of equipment that could release refrigerant must be EPA certified. EPA defines a technician as anyone who attaches gauges, adds or removes refrigerant, or opens the refrigerant circuit. Section 608 certifications do not expire.
  • Sales restriction: Only Section 608 certified technicians, or employers who show they employ one, may buy refrigerant for stationary AC. Section 609 auto AC certification does not qualify. The restriction covers cylinders, cans and drums, not pre-charged equipment.
  • No venting: Knowingly venting refrigerant while servicing, repairing or disposing of equipment is prohibited, with narrow exceptions such as de minimis releases.
  • Leak repair rules: EPA's leak repair requirements apply to appliances with 50 pounds or more of ozone-depleting refrigerant. Home split systems are typically far below that, so federal law does not force a homeowner to fix a leak. It does forbid intentionally venting, and a responsible contractor will recommend repair.

In Texas, AC work for the public must be done under a TDLR-licensed contractor; in Florida, under a DBPR-licensed contractor. See our EPA 608 guide.

R-22, R-410A, R-454B and R-32: what changed, including the May 2026 rule

R-22

U.S. production and import of R-22 ended January 1, 2020. EPA says you may keep using an existing R-22 system as long as you want, and it can be serviced with recovered, reclaimed or pre-2020 R-22. Recharging is legal, but supply is limited, so it is costly. EPA warns against "R-22a," a flammable propane and butane blend falsely marketed as a substitute; it is not acceptable in home AC.

R-410A

Under the AIM Act, enacted December 27, 2020, EPA is phasing down HFCs. U.S. HFC production and consumption fell to 60% of baseline in 2024 and falls to 30% in 2029. EPA's Technology Transitions rule requires new residential AC and heat pump systems to use refrigerant with a GWP of 700 or less starting January 1, 2025. R-410A, with a GWP of 2,090, is above that limit.

The 2026 change: the original rule set a January 1, 2026 deadline to install pre-2025 R-410A split systems. EPA's final rule of May 26, 2026, effective July 27, 2026, removed that deadline, so residential and light commercial equipment made or imported before January 1, 2025 can be installed with no deadline. EPA cited supply chain problems in 2025 after R-454B equipment was introduced. The rule also kept the policy that R-410A replacement condensing units may be made and sold to repair existing systems, and EPA's restrictions do not cover components used to repair existing systems.

EPA also acknowledged that R-410A for recharging older systems is likely to rise in price as the phasedown continues, with a further step down in 2029.

R-454B and R-32

EPA's SNAP program lists R-454B (GWP 470) and R-32 (GWP 675) as acceptable, with use conditions, for new residential AC and heat pumps. Both are ASHRAE class A2L, meaning mildly flammable. R-410A is class A1, nonflammable. Equipment built for A2L refrigerants includes safety features such as leak detection and specific installation rules.

Texas note: TDLR's FAQ describes refrigerant acceptability for comfort AC in terms of nonflammable A1 refrigerants. Contractors should confirm current TDLR rules on A2L refrigerants, and homeowners can ask their contractor how their installation complies. Our refrigerant transition guide covers the details.

Can a technician add R-454B to my R-410A system?

No. Each system is designed, tested and listed for one refrigerant. R-454B and R-32 have different pressures, oil needs and flammability, and A2L equipment includes safety features that an R-410A system does not have. EPA lists A2L refrigerants for new equipment with use conditions; they are not drop-in replacements.

Do not let anyone mix refrigerants or "top off" with a different one. A mixed charge cannot be properly measured or recovered, may damage the compressor, and can void warranties. If your R-410A system needs a major part, the repair uses R-410A components, which EPA's rules still allow. If you replace the whole system, the new one will typically use R-454B or R-32, with matched indoor and outdoor units. Florida requires matched indoor and outdoor units on replacements, verified by AHRI data or other approved documentation (FBC-Energy R501.7).

Is a refrigerant leak dangerous?

For most home systems, the main risks are to the equipment and your wallet, but a few cautions apply:

  • R-410A and R-22 are nonflammable, but in an enclosed space a large leak can displace oxygen. Ventilate the area and leave if you feel dizzy.
  • Liquid refrigerant can cause frostbite on contact with skin or eyes.
  • A2L refrigerants such as R-454B and R-32 are mildly flammable. Systems that use them are designed with leak sensors and controls; follow the equipment's instructions if a leak alarm sounds.
  • A chemical or exhaust-like smell can mean a significant leak. Lennox advises turning off the unit and calling a professional.
  • Never use "R-22a" or other unapproved hydrocarbon blends. EPA warns they are flammable and not acceptable in home AC.

Running a system low on refrigerant strains the compressor. Lennox notes that operating with a low charge risks major damage.

What is leak sealant and is it safe?

Leak sealants are products injected into the refrigerant circuit that are meant to plug small leaks from the inside. They are marketed as a cheaper alternative to finding and repairing a leak.

Before agreeing to one, ask these questions:

  • Does the equipment manufacturer allow sealants? Some warranties exclude damage from additives.
  • What happens to the metering device and filter-drier? Concerns with some sealants include clogging small passages.
  • Will the next technician know? Ask that the invoice name the product used, because sealants can affect recovery equipment and future repairs.
  • What is the leak size? Sealants are marketed for very small leaks, not cracked coils or broken joints.

We could not confirm an EPA position on sealant products for this page. On an older R-22 or R-410A system near the end of its life, some owners accept a sealant as a short-term measure. On a newer system under warranty, a proper repair is usually the safer choice.

What do recharges and leak repairs cost?

Refrigerant is usually billed by the pound, plus labor and the leak search. We could not load an independent, dated 2026 price-per-pound survey for R-410A, R-22, R-454B or R-32 in Texas or Florida, so we are not printing a number. Here is what we can say with sources:

  • R-22 has had no new U.S. production or import since 2020, so it is the most expensive to buy.
  • EPA says R-410A for recharging older systems is likely to rise in price as the HFC phasedown continues, with HFC supply dropping to 30% of baseline in 2029.
  • A typical home system holds several pounds of refrigerant, and the amount depends on the system size and line set length; the factory charge is on the data plate.

For a fair bill, ask for the price per pound before work, the number of pounds added on the invoice, the leak search method, and the leak location. For scale on the replacement side, Trane's 2026 guide puts an installed central AC at $6,568 to $13,669 and a heat pump at $8,313 to $15,608 by tier, as manufacturer national estimates.

Coil warranty versus labor

Many manufacturer parts warranties cover a leaking coil for a number of years, often longer when the product was registered on time. Parts warranties usually do not cover labor, refrigerant, or the leak search, which can be a large share of the bill. Check your registration status and ask whether the installer offered a separate labor warranty. See our warranty guide.

Should I fix the leak or replace the system?

SituationUsually makes sense
System under 10 years, R-410A or newer, leak at a valve or jointRepair the leak and recharge
Leaking indoor coil, parts warranty still validReplace the coil under warranty, pay labor and refrigerant
Leaking coil, out of warranty, system 12 to 15+ yearsGet repair and replacement quotes side by side
R-22 system with any significant leakReplacement is often the better long-term value
Leak cannot be found after a proper searchShort-term recharge on an old system; plan replacement
Repeated leaks on the same coilReplace the coil or system

Trane says properly installed and maintained ACs are expected to last about 15 years. Florida's code lets you repair part of a functional unit, such as a new compressor in an older system, without bringing the whole system to current code, but replacing a functional unit such as a condenser is not a repair and must meet current efficiency and matching rules (FBC-Energy R501.7). Our repair or replace guide lays out the full decision.

How to choose a provider

  • Rule out a dirty filter or blocked airflow before assuming low refrigerant.
  • Read the refrigerant type on the outdoor unit data plate.
  • Ask for a leak search, not just a recharge.
  • Get the price per pound in writing before work begins.
  • Make sure the invoice lists pounds added, the leak location and the method used.
  • Never allow mixing refrigerants or adding a different type.
  • Ask whether any sealant or dye will be used and whether the manufacturer allows it.
  • Check your parts warranty and registration before paying for a coil.
  • Verify the technician holds EPA 608 certification and works for a TDLR- or DBPR-licensed contractor.
  • Compare repair and replacement quotes if the system is over 12 years old or uses R-22.

Related ac and heating guides

AC and heating by state and city

Questions people ask

How much does it cost to recharge AC refrigerant?

It depends on the refrigerant type, how many pounds are needed, and the labor and leak search. We could not verify a current independent Texas or Florida price survey, so we do not print a range. R-22 is the most expensive because production ended in 2020, and EPA says R-410A prices are likely to rise as the phasedown continues. Get the per-pound price and total in writing before work.

Does AC refrigerant need to be topped off?

No. Refrigerant is not used up. A properly charged, leak-free system should never need topping off. If a technician says your system needs refrigerant, ask where the leak is and what it costs to repair it. A top-off without a repair is a temporary fix that you will pay for again.

Why does my AC keep losing Freon?

Because it has a leak that has not been repaired. Common leak spots are the indoor coil, the outdoor coil, valve cores, brazed joints, flare fittings and the line set. Corrosion, vibration and physical damage are common causes, and salt air speeds corrosion near the coast. Ask for a proper leak search and repair.

How much is R-410A or R-454B per pound in 2026?

Prices vary by supplier, region and season, and we could not load a reliable dated survey to quote. What EPA has said is that R-410A for servicing older systems is likely to rise in price as HFC supply is cut further, with a step to 30% of baseline in 2029. R-454B is used in new systems; ask your contractor for the per-pound price in writing.

What is an evaporator coil leak and is it worth fixing?

The evaporator is the indoor coil. Leaks there often come from corrosion and are usually fixed by replacing the coil, which means significant labor and new refrigerant. If the coil is under the manufacturer's parts warranty and the system is relatively young, a coil replacement can make sense. On an older or R-22 system, compare the cost to a full replacement.

Is formicary corrosion covered by warranty?

It depends on the manufacturer and the warranty terms. Many parts warranties cover a leaking coil for a set number of years, often longer if the product was registered, but usually not labor or refrigerant. Read your warranty, check your registration, and call the manufacturer with your model and serial numbers if a technician says the coil has formicary or pinhole leaks.

Is it legal to add refrigerant myself?

Not for a home central AC with refrigerant bought in cylinders. Federal rules limit sales of refrigerant for stationary AC to EPA Section 608 certified technicians, and Section 609 auto certification does not qualify. Intentionally venting refrigerant is also prohibited. Hire a licensed contractor whose technicians are 608 certified.

Should I replace my AC if it has a refrigerant leak?

Not always. A leak at a valve or joint on a newer system is usually worth repairing. A leaking coil on a system that is out of warranty and over 12 to 15 years old, or any significant leak on an R-22 system, often favors replacement. Get both quotes, consider efficiency gains, and check utility rebates before deciding.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration