New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Plumbing

How Do I Unclog a Kitchen Sink, Bathroom Sink, Shower or Tub Drain?

A practical order of attack for clogged drains, from plunging and cleaning the trap to snaking, with plumber costs, the risks of chemical cleaners and hydro jetting on old cast iron, and who pays in a Texas or Florida rental.

Start with the least risky fix. Use a cup plunger on sinks and tubs (block the overflow and the second bowl), then remove and clean the P-trap, then run a hand drain snake into the branch line. Skip caustic chemicals, especially on old pipes or septic. If more than one fixture is slow or water comes up in a tub when you run the washer, the clog is in the main line and needs a plumber.

Key facts

  • Fixr (updated August 2025) puts the national average to unclog a sink at $300, with a typical range of $250 to $400 and emergency calls of $450 to $800.
  • Fixr lists snaking at $100 to $300, an electric snake at $250 to $400, hydro jetting a sink line at $300 to $500 and P-trap cleaning at $100 to $300.
  • Fixr notes hydro jetting clears more debris than other methods but can damage old pipes.
  • Miami-Dade County warns that drain cleaners flushed into a septic system can destroy the bacteria the system needs and contaminate groundwater.
  • EPA lists cooking grease or oil and non-flushable wipes among items never to put down drains on septic.
  • Texas Property Code 92.052(b) says a landlord need not repair a condition caused by the tenant, an occupant, family or guest, unless it was caused by normal wear and tear.
  • Florida Statute 83.51(4) says a landlord is not responsible for conditions caused by the negligent or wrongful act of the tenant, family or guests.
  • Texas licenses Drain Cleaner and Drain Cleaner-Restricted registrants, who work under a Responsible Master Plumber (TSBPE).

Is it a branch clog or a main line clog? Decide first

Every sink, tub and shower drains through a short branch line into larger drains that join the main building drain and then the sewer or septic tank. Where the clog sits decides the fix.

What you seeLikely locationWhat to do
One sink, tub or shower is slow; everything else is fineThat fixture's trap or branch lineDIY steps below
Both kitchen bowls and the dishwasher back up togetherKitchen branch line past the trapSnake from the trap arm, or call drain service
Both bathroom sinks, or sink and tub in the same bathroom, are slowShared bathroom branchSnake the branch; check the vent
Toilet gurgles when the tub drains, or water rises in the tub when you flush or run the washerMain lineStop using water; see main sewer line clog
Water or sewage at the lowest drain in the house (a ground-floor shower or floor drain)Main line or sewer lateralCall a plumber now; see sewer backup

A useful rule from a forensic engineer quoted by Insurance Journal: a backed-up main drain pushes water out the lowest opening first. If the kitchen sink 36 inches off the floor is overflowing but the floor-level shower drain is not, the sink branch is clogged, not the main line.

How do I unclog a kitchen sink?

  1. Check the disposal first. If the sink with the disposal is the one backed up, turn the disposal off at the switch, then use the hex key on the bottom of the unit to free it and press the red reset button. Run cold water and try it. A jammed or clogged disposal blocks the drain. Never put your hand in it.
  2. Plunge. Use a flat cup plunger. On a double sink, plug the other bowl with a stopper or wet rag held down firmly, or the pressure just goes up the other side. If a dishwasher drains into the disposal, clamp its drain hose with a spring clamp or hold it pinched. Leave a few inches of water in the sink so the cup seals. Plunge 15 to 20 strokes.
  3. Clean the P-trap. Put a bucket underneath. Unscrew the two slip nuts by hand and remove the U-shaped trap. Clean out grease and food, check the washers, and reinstall hand-tight plus a quarter turn.
  4. Snake the trap arm. With the trap off, feed a quarter-inch hand snake into the pipe going into the wall. Turn the handle as you push. When you feel resistance, crank through it, pull back, and repeat. Reinstall the trap and run hot water.
  5. Call drain service if the snake hits a hard stop or the clog comes right back.

Kitchen clogs are mostly grease, coffee grounds, starchy food and eggshells. Grease looks harmless when hot but coats pipe walls as it cools and catches everything else. EPA puts cooking grease and oil at the top of its list of things not to put down the drain on a septic system, and it is just as bad for city sewers. Wipe greasy pans with a paper towel before washing.

How do I unclog a bathroom sink?

  1. Pull the pop-up stopper. Most bathroom sink clogs are hair and soap wrapped around the stopper. Some stoppers lift straight out. Others are held by a pivot rod under the sink: unscrew the nut on the back of the drain pipe, pull the rod out, lift the stopper, clean it and reinstall.
  2. Use a plastic drain hair tool (a barbed strip) to pull hair from the drain.
  3. Plunge with a wet rag pressed over the overflow hole so the plunger can build pressure.
  4. Clean the trap and snake the trap arm as for a kitchen sink.

Why does my shower drain slowly? Tub and shower fixes

Tub and shower clogs are almost always hair and soap scum within the first foot of the drain.

  1. Remove the strainer or stopper. Many unscrew; some have a screw under a cap. Trip-lever tubs have a linkage behind the overflow plate that pulls out.
  2. Pull hair out with a hair tool or a bent wire.
  3. Plunge with the overflow plate covered by a wet rag.
  4. Snake through the overflow opening on trip-lever tubs, or directly down the drain on showers.
  5. Install a hair catcher so it does not come back.

If the shower is slow and the toilet next to it gurgles, or the shower backs up when the toilet flushes, the problem is downstream of both fixtures. That is a branch or main line issue.

How do I use a drain snake?

A drain snake (also called an auger) is a coiled steel cable that you crank into the pipe. A hand snake with 15 to 25 feet of quarter-inch cable handles most sink, tub and shower clogs.

  1. Wear gloves and eye protection. Have a bucket and rags ready.
  2. Remove the stopper, or better, the P-trap, so the cable does not have to fight through the trap bend.
  3. Pull out a foot or so of cable, lock it, and push it into the pipe while turning the drum clockwise.
  4. When you hit resistance, keep turning. A bend feels springy; a clog feels soft or firm. Push and rotate through it.
  5. Pull the cable back slowly while turning, wiping it clean. Hair and debris often come out on the tip.
  6. Run hot water for a few minutes to test.

Do not force a power auger into small fixture drains. An oversized cable can kink inside the wall or crack old pipes. Toilets need a closet auger with a guard so the cable does not scratch the bowl.

Do chemical drain cleaners damage pipes?

They can, and they often do not fix the problem. Caustic and acid drain openers work by generating heat or dissolving organic material. Risks include:

  • Burns and eye injuries when the product splashes back, especially when someone then plunges or opens the trap.
  • Heat stress on older plastic traps and on corroded metal pipes. Old cast iron and galvanized drains with thin walls are the most vulnerable.
  • Septic harm. Miami-Dade County warns that drain cleaners, floor cleaners, toilet bowl cleaners, solvents and other chemicals flushed down drains can destroy important bacteria in a septic system and contaminate the ground and groundwater.
  • A standing pool of caustic water if it fails, which makes the plumber's job more dangerous and expensive. Tell a plumber if you have used a chemical.

If you use any product, read the label, never mix products, and never use one in a fully clogged drain with standing water. Enzyme or bacterial drain maintenance products are gentler but slow; they are for maintenance, not for clearing a blocked line.

Does baking soda and vinegar actually unclog drains?

It is safe and cheap, but its power is limited. The fizz comes from a mild reaction that can loosen light film near the drain opening. It will not dissolve a hair mat or a grease plug deep in the line. Treat it as a deodorizing and maintenance step, not a cure. Boiling water poured down a kitchen drain can soften fresh grease, but do not pour boiling water into a porcelain toilet or into PVC joints that are already weak.

What works better at home, in order: removing and cleaning the stopper, plunging with the overflow blocked, cleaning the trap, and a hand snake.

What is a P-trap, and why does it dry out and smell?

The P-trap is the U-shaped bend under every sink, tub and shower, and built into every toilet. It holds a few inches of water that blocks sewer gas from coming into the room. When a fixture is not used for weeks, that water evaporates and the room smells like sewage.

The fix is simple: run water for a minute in every sink, tub, shower and floor drain every few weeks, including guest baths and laundry floor drains. For drains you rarely use, adding a small amount of mineral oil after running water slows evaporation. If a trap keeps losing water quickly even when used, the cause may be a vent problem siphoning it, or a crack. See sewer gas smell.

Why do my drains smell like sewage?

  • Dry trap (most common).
  • Biofilm in the overflow channel or on the stopper. Clean it.
  • Failed wax ring under a toilet.
  • A cracked drain or vent pipe in a wall, or a failed air admittance valve.
  • Main line backup starting. If the smell comes with slow drains, read the main line guide.

Why do multiple drains clog at once?

When two or more fixtures on different branches slow down at the same time, the clog is downstream of where those branches join. Usually that is the main building drain or the sewer lateral to the street. Common causes are roots, grease, wipes, a sag (called a belly) in the pipe, or a broken pipe. In older Texas and Florida homes, cast iron and clay drains with internal scale catch debris more easily. A sewer camera inspection shows which.

A blocked roof vent can also make several drains slow and gurgle without any clog. If the drains run free but sound like they are gulping air, the vent may be the problem.

How much does a plumber charge to unclog a drain?

National figures from Fixr; local prices vary.

ServiceTypical costFixr page and date
Unclog a sink (average)$300 (range $250 to $400)Unclog kitchen sink, Aug. 2025
Hand snake$100 to $300Aug. 2025
Electric snake$250 to $400Aug. 2025
Hydro jetting (sink line)$300 to $500Aug. 2025
P-trap removal and cleaning$100 to $300Aug. 2025
Garbage disposal clog$60 to $150Aug. 2025
Open pipe cleaning$550 to $800Aug. 2025
Emergency sink unclog$450 to $800Aug. 2025
Service call fee$50 to $300, may be credited to the jobAug. 2025
Main sewer line clearing$350 to $650, average $475Unclog main sewer line, Jan. 2025
Camera inspection$100 to $800Jan. 2025

Fixr says plumbers who bill hourly charge $45 to $200 an hour, and after-hours work adds $45 to $200 an hour. Ask whether the price is flat, what happens if the first method fails, and whether a camera is included if the clog comes back.

Is hydro jetting worth it, and is it safe on old cast iron?

Hydro jetting sends water at very high pressure through a hose with a spinning or multi-jet nozzle. It scours grease, scale and roots from pipe walls rather than just punching a hole through the clog, so it can last longer than snaking.

It is not right for every pipe. Fixr notes that hydro jetting clears more debris than other methods but can damage old pipes. In many older Texas and Florida homes, drains are cast iron with thin, scaled walls, or clay with weak joints, or even Orangeburg fiber pipe. High pressure can blow through a weakened wall or a broken section and turn a clog into a repair.

MethodBest forRisk
Hand or power snake (auger)Hair, paper, soft clogs, quick restoration of flowLow; may leave grease film behind, clog can return
Root cutting head on a power augerRoots in a main lineModerate on cracked pipe
Hydro jettingGrease, heavy buildup, recurring clogs in sound pipeHigher on old cast iron, clay, Orangeburg or broken pipe
Descaling (chain knocker)Heavy cast iron scale, often before liningModerate; done by specialists, often with a camera

Good practice: ask for a camera inspection before jetting an older line, and ask the contractor what pressure they will use and how they will protect a weak section. If your home is in Florida and was built before about 1975, also read cast iron pipes in Florida.

Who can legally clear drains in Texas and Florida?

Texas. The Texas State Board of Plumbing Examiners registers Drain Cleaner-Restricted and Drain Cleaner registrants as add-ons to a Plumber's Apprentice registration. Under Texas Occupations Code 1301.002, a drain cleaner works under the supervision of a Responsible Master Plumber and can install cleanouts and remove and reset P-traps to eliminate obstructions in building drains and sewers. Homeowners can clear their own drains. Verify any company's license on the TSBPE website.

Florida. Plumbing contractors are licensed by DBPR's Construction Industry Licensing Board. Local permit rules usually exempt simple drain clearing. Jacksonville, for example, says clearing drain stoppages is exempt from permits when no valves, pipes or fixtures are replaced. Replacing pipe is different. Miami-Dade says replacing a concealed trap, drain or waste pipe is new work that needs a permit.

See how to hire a plumber and plumbing scams, including the "$49 drain special" that becomes a pitch for a new sewer line.

Is a clogged drain the landlord's or the tenant's responsibility?

It depends on what caused the clog, and both states answer the same way in principle.

Texas. Texas Property Code 92.052(b) says that, unless the condition was caused by normal wear and tear, the landlord has no duty during the lease to repair a condition caused by the tenant, a lawful occupant, a family member or a guest. So a clog from grease, a toy or wipes the tenant flushed can be billed to the tenant if the lease allows. A clog from roots, an old pipe or a sagging sewer line is the landlord's. If raw sewage backs up into the unit, Texas law gives tenants special remedies, including repair and deduct after notice in some cases. See Texas landlord plumbing repairs.

Florida. Florida Statute 83.51(4) says the landlord is not responsible for conditions caused by the negligent or wrongful act or omission of the tenant, the tenant's family or others on the premises with the tenant's consent. Otherwise, the landlord must keep plumbing in reasonable working condition where no local code applies. See Florida landlord plumbing repairs.

Practical tip: ask the plumber to write down what they pulled out of the line. "Roots at 40 feet" and "baby wipes in the trap" lead to different bills.

How do I prevent clogged drains?

  • Use strainers in kitchen sinks and hair catchers in showers.
  • Scrape plates into the trash. Keep grease, coffee grounds and eggshells out of the sink.
  • Run plenty of cold water when using a disposal, and keep running it a bit after.
  • Do not flush wipes, even ones labeled flushable. EPA lists non-flushable wipes among items never to flush.
  • Clean pop-up stoppers every few months.
  • Run water in unused drains every few weeks so traps do not dry out.
  • If you are on septic, avoid drain chemicals. See septic vs sewer.
  • If the same drain clogs repeatedly, get a camera inspection instead of paying for repeat snaking.

How to choose a provider

  • Check whether one drain or several drains are slow.
  • Look for water at the lowest drain in the house before plunging.
  • Reset the garbage disposal before plunging a kitchen sink.
  • Plug the second bowl or the overflow when plunging.
  • Remove and clean the P-trap with a bucket underneath.
  • Use a hand snake through the trap arm, not through the trap.
  • Skip caustic drain chemicals, especially on septic or old metal pipes.
  • Ask for a camera inspection before hydro jetting an older line.
  • Ask the plumber to write down what caused the clog.
  • Install strainers and hair catchers to prevent repeats.

Related plumbing guides

Plumbing by state and city

Questions people ask

Can grease really clog pipes?

Yes. Fats, oils and grease are liquid when hot but cool and stick to pipe walls, building layers that catch food and soap until the pipe narrows shut. EPA lists cooking grease and oil first on its list of items never to put down drains on septic, and city sewers suffer the same buildup. Wipe pans with paper towels and put cooled grease in the trash.

How do I know if the clog is in the main line?

Signs include several fixtures slow at once, a toilet that gurgles when the tub or washer drains, water rising in a tub or shower when you flush, and water appearing at the lowest drain or an outdoor cleanout. Fixr lists these among the signs of a clogged main sewer line. Stop running water and call a plumber.

Should I use a plunger on a double kitchen sink?

Yes, but plug the other bowl tightly with a stopper or a wet rag held firmly, and pinch or clamp the dishwasher drain hose. Otherwise, the pressure escapes through the open side and nothing moves. Leave a few inches of water in the sink so the cup seals, and plunge firmly 15 to 20 times.

Why does my clog keep coming back?

Repeat clogs mean the cause is still there: grease coating the line, scale or roots catching debris, a sag holding water, or a broken pipe. Snaking punches a hole but may not clean the walls. Ask for a camera inspection to see the cause before choosing jetting, root cutting, descaling or a repair.

Is a clogged drain covered by insurance?

Clearing a clog is maintenance and is not covered. If a clog causes a sudden overflow, the Texas Department of Insurance says most policies cover sudden and accidental water damage, but sewer or drain backup is often an optional endorsement in Texas. Check your policy for water backup coverage before you need it.

Can a hydro jetter damage my pipes?

It can. Fixr notes hydro jetting can damage old pipes. Thin, corroded cast iron, cracked clay, Orangeburg fiber pipe and broken sections are at risk from high pressure. A camera inspection first, and a contractor who adjusts pressure and nozzle to the pipe, lowers the risk. Sound PVC usually handles jetting well.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration