Local Guide · Plumbing
How Do You Hire a Plumber in Texas or Florida and Check the License?
An independent hiring guide: how to verify a Texas or Florida plumbing license in two minutes, what a real estimate must show, flat-rate vs hourly pricing, deposits, insurance, warranties and the red flags that should end the conversation.
In Texas, ask for the Responsible Master Plumber's license number (it starts with M) and check it on the TSBPE license search; it should also appear on the truck, the estimate and the invoice. In Florida, look up the contractor on myfloridalicense.com: CF licenses work statewide, RF only in certain local areas. Get written, itemized estimates for non-emergency jobs, ask who pulls the permit, avoid large cash deposits, and get the labor warranty in writing.
Key facts
- TSBPE: Master Plumber license numbers begin with M; numbers beginning with A, T, J or other letters are not master licenses (TSBPE consumer information).
- TSBPE rules require the RMP's license number and company name on both sides of every service vehicle, in contrasting letters at least two inches high, preceded by M, MPL or RMP (22 TAC 367.10).
- Texas proposals, estimates, invoices and contracts must show on the first page the RMP's name and license number, the phrase 'regulated by the Texas State Board of Plumbing Examiners' and the board's contact information (22 TAC 367.10).
- A Texas Responsible Master Plumber must carry commercial general liability insurance of at least $300,000 (Occ. Code 1301.552).
- Florida plumbing contractors are licensed by DBPR as CF (certified, statewide) or RF (registered, only in the local jurisdictions where they qualified).
- In Florida, a contractor who takes more than 10 percent of the price as an initial payment on residential work must apply for permits within 30 days and start work within 90 days after permits issue, unless there is just cause or a written agreement (Fla. Stat. 489.126).
- TSBPE does not regulate plumbers' prices and recommends getting several written estimates.
- BLS May 2025: plumbers, pipefitters and steamfitters earned a mean of $29.22 an hour in Texas and $26.94 in Florida, versus $34.70 nationally. These are worker wages, not the rates companies bill.
Step 1: Check the license (two minutes, every time)
Licensing is the one thing you can verify for free, from your phone, before anyone walks in your door. It tells you the person is legally allowed to do the work, that a state board can discipline them, and in Texas that the company carries required liability insurance.
How to check a plumber's license in Texas
- Ask for the Responsible Master Plumber (RMP). Every Texas company that advertises or offers plumbing must secure the services of an RMP (Occ. Code 1301.351(a-2)). The RMP is responsible for supervising the work, pulling permits and requesting inspections.
- Get the RMP's license number. TSBPE says master plumber numbers begin with "M." A number beginning with "J" (journeyman), "T" (tradesman) or "A" (apprentice) is not a master license. Those workers can be legitimate, but they must work under an RMP.
- Look it up on the TSBPE Public License Search. Confirm the license is active and, as TSBPE suggests, that the master plumber has a certificate of insurance on file.
- Check the truck and paperwork. TSBPE rule 367.10 requires the RMP's license number and the company name on both sides of every service vehicle, preceded by "M," "MPL" or "RMP," in contrasting letters at least two inches high. The first page of every estimate, invoice or contract must show the RMP's name and number, the phrase "regulated by the Texas State Board of Plumbing Examiners," and the board's address, phone and website. Ads must show the RMP license number too, with narrow exceptions.
- Ask about complaints. TSBPE's consumer page says you can call its Enforcement Department at (512) 936-5200, ext. 65249, to ask about valid complaints, and check with your city's plumbing inspection department for local complaints and whether the company is registered there.
How to verify a plumbing contractor license in Florida
- Get the license number and the exact company name.
- Search DBPR's licensee portal at myfloridalicense.com by name or number.
- Read the license type. DBPR codes plumbing contractors as CF (certified: holds a state certificate and may contract anywhere in Florida) or RF (registered: met a local jurisdiction's competency requirements and may contract only in those jurisdictions). An RF license from another county may not cover your address.
- Check status: current and active, with no recent discipline you are uncomfortable with.
- Check local registration. Some counties and cities require contractors to register locally before pulling permits. Your building department can tell you.
Why it matters in Florida: unlicensed contracting is a first-degree misdemeanor, and a third-degree felony if repeated or during a governor-declared state of emergency (489.127). A contract with an unlicensed contractor is unenforceable by that contractor (489.128), but unlicensed work also may not pass inspection and may complicate insurance claims. Our Texas plumbing license guide and Florida plumbing license guide explain the license levels.
Step 2: Insurance and bonding
Texas. The RMP designation requires proof of commercial general liability insurance of at least $300,000 for all claims in a one-year period (Occ. Code 1301.552; TSBPE also lists the $300,000 requirement for the RMP designation). Cities that issue plumbing permits must verify this insurance with the board. That covers damage the company causes to your property; it is not a guarantee of workmanship.
Florida. Ask for a certificate of insurance for general liability and, if the company has employees, workers' compensation. Call the insurer listed on the certificate to confirm it is active. Florida's owner-builder disclosure warns owners that they may be held liable for injuries to unlicensed workers on their property and that homeowner's insurance may not cover them, which is one more reason to hire licensed, insured contractors.
In both states, ask to be named as the certificate holder for larger jobs, so you are notified if the policy is canceled.
Step 3: How many quotes, and what a plumbing estimate should include
For emergencies, you may only have time for one call. For anything that can wait a few days, such as a water heater replacement, a re-pipe or sewer line work, get two or three written estimates. TSBPE itself advises consumers to obtain several price estimates and to make sure all warranties and cost estimates are in writing.
Anatomy of a good estimate
| Item | What to look for |
|---|---|
| Company and license | Name, address, phone; in Texas the RMP name and number and TSBPE contact line on page one; in Florida the CF or RF number |
| Scope of work | Exactly what will be replaced or repaired, with locations ("replace 50-gallon gas water heater in garage, same location") |
| Materials | Type and size of pipe, fixture or equipment; brand or "equal" if relevant |
| Code items | Permit, expansion tank, drain pan, venting, shutoffs, any code upgrades |
| Access and restoration | Who opens and closes walls, ceilings or slabs, and who patches and paints |
| Price | Total and breakdown; flat rate or hourly with an estimate of hours |
| Payment schedule | Deposit, progress payments, final payment tied to completion or passed inspection |
| Timeline | Start date and expected duration |
| Warranty | Labor warranty length and what it covers; manufacturer's warranty on equipment |
| Exclusions | What is not included |
| Disposal | Haul-away of old equipment |
Compare scopes, not just totals. A cheaper quote may leave out the permit, the expansion tank, or drywall repair. TSBPE says an estimate should be detailed enough that you understand exactly what work will be performed and how the company expects to be paid.
Flat-rate vs time-and-materials pricing
Plumbers commonly price service work one of two ways.
| Flat rate (upfront pricing) | Time and materials (T&M) | |
|---|---|---|
| How it works | A set price per task from a price book, quoted before work starts | An hourly labor rate plus parts, billed for actual time |
| Pros | You know the price before you agree; no penalty if the job runs long | Can be cheaper for quick jobs; transparent about time spent |
| Cons | Price includes the company's estimate of risk; harder to compare line by line | Open-ended if problems arise; you pay for slow work |
| Ask | "What exactly does this price include? What would change it?" | "What is your hourly rate, minimum charge, and estimate of hours? Do you bill drive time?" |
Flat-rate pricing is not a rip-off by itself. It becomes a problem when a technician presents a menu of options under time pressure, or when the "flat rate" for a simple part swap is far above what other licensed companies quote. If a flat-rate quote seems high, ask for it in writing, thank them for their time, and get a second opinion. See plumbing scams for pressure tactics to watch for.
What is a reasonable plumber hourly rate in Texas or Florida?
We do not publish a billed hourly rate because we did not find a named, dated study of plumbing company rates for Texas and Florida that we could verify. For context, BLS's May 2025 data shows the mean wage for plumbers, pipefitters and steamfitters was $29.22 an hour in Texas and $26.94 in Florida, against $34.70 nationally. Companies bill well above wages because they pay for trucks, insurance, licensing, permits, training, dispatch and warranty callbacks. The best benchmark is two or three local written quotes. See plumbing costs in Texas and Florida.
Trip fees and diagnostic fees
Many companies charge a service call, trip or diagnostic fee to come out and find the problem. Ask on the phone: how much is it, is it credited toward the repair, and is it higher after hours? Get the answer before the truck rolls.
Should I pay up front or a deposit?
For small service calls, payment is normally due when the work is done. For larger jobs, a deposit for special-order equipment can be reasonable. Keep it modest and tie the rest to progress you can see.
Florida's deposit rules
Fla. Stat. 489.126 protects homeowners who pay a large deposit:
- A contractor who receives more than 10 percent of the contract price as an initial payment for residential work must apply for necessary permits within 30 days and start work within 90 days after permits are issued, unless there is just cause or you agreed in writing to longer periods.
- If the contractor does not, you send a written demand by certified mail, return receipt requested, to apply for permits, start work or refund the payment. If the contractor does nothing within 30 days of that demand, the law allows an inference that it lacked just cause.
- A contractor who takes money for residential work in excess of the value of work performed may not stop work for 90 days (or another agreed period) without just cause. Misapplying the money can be prosecuted criminally.
Lien protections
In Florida, a direct contract over $2,500 to improve a dwelling of up to four units must include the statutory lien-law warning on the front page in at least 12-point bold capital letters (713.015). Subcontractors and suppliers not in privity with you must serve a Notice to Owner within 45 days of first furnishing labor or materials (713.06). Get lien releases before final payment on bigger jobs. In Texas, a lien on a homestead requires a written contract signed before work begins, by both spouses if married, and filed with the county clerk (Prop. Code 53.254). See mechanic's liens and plumbing.
Pay by check or card, not cash, so you have a record. A contractor who insists on cash only, or large payment before any work or materials, is a red flag.
Is a big company or an independent plumber better?
Both can be excellent, and both can be bad. What matters is the license, the paperwork and how they treat you.
| Larger company | Small or independent shop | |
|---|---|---|
| Availability | Often 24/7 dispatch and more trucks | May have limited after-hours service |
| Pricing | More often flat-rate price books | More often hourly or custom quotes |
| Who shows up | A technician working under the company's RMP or qualifier | Often the owner or a small crew |
| Warranty follow-up | Formal programs | Depends on the owner |
| Sales pressure | Some use commission-based technicians; ask | Less common, but not absent |
A fair question for any company: "Are your technicians paid commission on what they sell?" The answer tells you how to read a recommendation to replace rather than repair.
Should I hire through Angi, HomeAdvisor, Thumbtack or Google?
These platforms can help you find names quickly. Understand how they work before you treat them as a recommendation.
- Who pays. Lead-generation platforms generally earn money from the businesses listed, through lead fees, advertising or commissions, not from you. That does not make listings bad, but it means ranking and badges are not the same as an independent review. Read each platform's own terms for what a badge or guarantee means.
- Who you are actually hiring. Some listings and call-tracking numbers route you to a referral service or a different company than the name you clicked. Ask on the phone: "What is your company's legal name, your license number, and your physical address?"
- Verify independently. Whatever the platform says, check the license yourself on TSBPE or DBPR. In Texas, the ad itself should show the RMP license number under TSBPE rules, with exceptions for some national and franchisor advertising that must say license numbers are available on request.
- Compare. Use platforms to build a short list, then get quotes directly.
Map listings with no street address, a name that is just keywords ("Best Emergency Plumber Houston 24/7"), or a phone number that answers with a generic greeting deserve extra checking. See plumbing scams.
How to read online reviews for plumbers
- Read the one- to three-star reviews and the company's replies. A calm, specific reply that fixes the problem is a good sign.
- Look for the job type you need. Great drain-cleaning reviews say little about a re-pipe.
- Watch for patterns: upselling, no-shows, surprise fees, unfinished permits.
- Be skeptical of bursts of short five-star reviews posted close together.
- Check official records too: TSBPE or DBPR complaints and discipline, and in Texas the city's plumbing inspection department, which TSBPE suggests asking about local complaints.
- Ask for references on larger jobs, and call them. TSBPE recommends verifying references before choosing a plumber.
Permits: who pulls them and why it matters
Permits are how the city or county confirms work meets code. Skipping a required permit can cause problems with insurance, a Florida 4-point inspection, and a future sale.
- Texas: cities over 5,000 people must require plumbing permits, except for repairing leaks and replacing faucets, ballcocks, garbage disposals and toilets (Occ. Code 1301.551). The RMP is responsible for obtaining permits for work under his or her license. Houston requires a water heater permit pulled by a master plumber registered with the city.
- Florida: permit rules are local. Miami-Dade exempts repair work by a licensed plumbing contractor up to $500 and some fixture swaps, but not water heater replacement or replacing concealed pipe. Jacksonville requires a permit to replace a water heater and charges a $45 reinspection fee after a failed inspection. Tampa issues trade permits for like-for-like water heater replacement, re-pipes and fixture replacements.
Ask every bidder: "Is a permit required, who pulls it, and is it in the price?" Then ask for the permit number and check that it gets a final inspection. See plumbing permits and DIY rules.
What warranty should a plumber give on labor?
Neither Texas nor Florida sets a minimum labor warranty for plumbing repairs that we found. Warranties are a contract term, so get them in writing on the estimate or invoice: how long, what it covers (parts, labor, callbacks), what voids it, and how to make a claim.
Equipment such as water heaters carries a separate manufacturer's warranty, which may require professional installation, registration or specific components. A. O. Smith's manual, for example, warns that tank failure from thermal expansion is not covered by its warranty, and says properly sized expansion tanks are required on closed systems. Ask the installer to register the warranty and give you the paperwork.
In Texas, the state's home solicitation cancellation law does not apply to plumbing goods or services from a licensee when you started the transaction, except for breach of an express warranty or negligent installation in violation of the building code (Occ. Code 1301.004). That makes a written warranty more valuable.
Red flags that should end the conversation
- No license number, or a number that does not match the company name.
- In Texas, no RMP number on the truck, the estimate or the invoice.
- Cash only, or a large payment before any work or materials.
- "We don't need a permit for that" on a water heater, re-pipe or sewer replacement.
- A quote that is only a total with no scope.
- Pressure to sign today, "this price expires when I leave."
- Offers to "help with your insurance claim" by interpreting your policy. In Florida, contractors may not interpret policies or adjust claims unless licensed as public adjusters (489.147), and in Texas a contractor may not act as a public adjuster on property it is repairing (Ins. Code 4102.163).
- Door-to-door offers after a storm. Florida's home solicitation law lets you cancel a qualifying sale until midnight of the third business day after signing (501.021, 501.025).
After the job: what to keep
- The final itemized invoice with the license information.
- The permit number and the passed final inspection.
- Equipment model and serial numbers, and warranty registration.
- Photos of the finished work, especially anything that will be covered by drywall or tile.
- Lien releases for larger jobs.
If something goes wrong, start with a written request to the company. If that fails, see plumber complaints and disputes for TSBPE, DBPR, attorney general and small claims options. City guides: Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando, Jacksonville.
How to choose a provider
- Get the license number before booking: RMP number (M) in Texas, CF or RF number in Florida.
- Look it up on the TSBPE license search or myfloridalicense.com.
- In Texas, match the RMP number on the truck, estimate and invoice.
- Ask the service call or diagnostic fee and whether it is credited.
- Get two or three written, itemized estimates for non-emergency work.
- Compare scopes: permit, code items, access and restoration, disposal.
- Ask who pulls the permit and get the permit number.
- Keep deposits modest; pay by check or card.
- Get the labor warranty in writing.
- Keep the final invoice, permit inspection and warranty registration.
Related plumbing guides
- What Are the Most Common Plumbing Scams, and How Do You Protect Yourself?
- How Do I File a Complaint Against a Plumber in Texas or Florida?
- How Do You Get a Plumbing License in Texas? TSBPE Licenses, Hours and Endorsements
- How Do You Get a Plumbing License in Florida? Certified vs Registered Contractors, Journeymen and the CILB
- Do I Need a Permit? Plumbing Permits and DIY Rules in Texas and Florida
- How Much Does a Plumber Cost in Texas and Florida? 2026 Prices for 40+ Common Jobs
- Can a Plumber Put a Lien on Your Home? Mechanic's Liens in Texas and Florida
Plumbing by state and city
Questions people ask
Do plumbers need insurance in Texas and Florida?
In Texas, the Responsible Master Plumber must carry commercial general liability insurance of at least $300,000, and cities issuing permits must verify it with TSBPE. In Florida, ask for a certificate of general liability insurance and workers' compensation if the company has employees, and call the insurer to confirm it is active. Insurance covers damage the company causes, not workmanship disputes.
What does a Texas plumbing license number look like?
Texas master plumber license numbers begin with M, according to TSBPE. Journeyman, tradesman and apprentice credentials use other letters. The company's Responsible Master Plumber number must appear on both sides of its service vehicles preceded by M, MPL or RMP, and on the first page of estimates and invoices along with the TSBPE contact information.
What is the difference between CF and RF in Florida?
CF is a certified plumbing contractor, licensed by the state and able to contract anywhere in Florida. RF is a registered plumbing contractor who met a local jurisdiction's competency requirements and may contract only in those jurisdictions. Check that an RF contractor's registration covers your city or county before you hire.
Can a plumber's apprentice work alone in my house in Texas?
Not on plumbing. TSBPE says a registered plumber's apprentice may do plumbing only under direct supervision, meaning a TSBPE licensee is on the job site at all times. Without a licensee present, an apprentice may do only manual tasks such as digging trenches. Ask who the licensed plumber on site will be.
Is it OK to hire a handyman for small plumbing jobs?
Only for very limited tasks. In Texas, plumbing for the public requires TSBPE licensing; the homestead owner exemption does not extend to a handyman. In Florida, a minor-work exemption covers casual jobs under $2,500 total, but not work that is part of a larger job or by someone who advertises as a contractor. When in doubt, use a licensed plumber.
How do I know if I need a permit?
Ask your city or county building department, and ask the plumber. Texas cities over 5,000 people must require permits except for leak repairs and replacing faucets, ballcocks, disposals and toilets. Florida permits are local: Jacksonville requires one for water heater replacement, and Miami-Dade exempts small repairs by licensed plumbing contractors. A good plumber will tell you up front.
Should I let the plumber who found the problem also do the repair?
Often that is fine, especially for simple repairs. For expensive recommendations such as a sewer line replacement, slab leak reroute or whole-house re-pipe, get a second opinion and ask for the camera video or test results. A reputable company will share evidence. See our sewer camera inspection guide for what to ask for.
Can I cancel a plumbing contract after signing?
It depends. Florida lets buyers cancel home solicitation sales until midnight of the third business day, but not sales that resulted from the buyer's own request for specific services. Texas exempts consumer-initiated plumbing from its home solicitation cancellation law, with exceptions for warranty breach and negligent installation. Read cancellation terms before signing.
Sources
- TSBPE: consumer information
- TSBPE: Responsible Master Plumber
- TSBPE: apprentice registration
- TSBPE: license types
- TSBPE board rules (22 TAC 367.9, 367.10)
- Texas Occupations Code chapter 1301
- Texas Property Code chapter 53 (mechanic's liens)
- Texas Insurance Code chapter 4102
- Florida DBPR: Construction Industry Licensing Board
- Florida Statutes 489.105 (definitions: certified and registered)
- Florida Statutes 489.126 (moneys received by contractors)
- Florida Statutes 489.127 and 489.128
- Florida Statutes chapter 489 (489.103, 489.147)
- Florida Statutes chapter 713 (construction liens)
- Florida Statutes 501.021 and 501.025 (home solicitation sales)
- BLS OEWS May 2025 (plumbers, SOC 47-2152) via BLS API
- Houston Permitting Center: water heater permits
- Miami-Dade County permit exemptions
- City of Jacksonville Building Inspection FAQs
- City of Jacksonville inspections
- City of Tampa trade permit limitations
- A. O. Smith water heater instruction manual
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


