Local Guide · Plumbing
How Much Does a Plumber Cost in Texas and Florida? 2026 Prices for 40+ Common Jobs
Sourced, dated price ranges for more than 40 plumbing jobs, plus hourly rates, emergency fees, metro labor data for Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando and Jacksonville, and how to judge a quote.
Plumbers typically charge $75 to $150 an hour, about $90 on average, with a $45 to $200 full range and service call fees of $50 to $300 (Fixr, January 2025). Typical jobs: toilet installation $250 to $800, water heater replacement about $900 to $3,000, slab leak repair $1,000 to $4,000, repipe $1,500 to $15,000. Plumber wages in every major Texas and Florida metro run 12 to 23 percent below the national average (BLS, May 2025).
Key facts
- Plumber hourly rates: $75 to $150, national average about $90; full range $45 to $200 (Fixr, Jan. 2025).
- Service call fees run $50 to $300 (Fixr); emergency call-out fees $200 to $300 plus $50 to $200 transportation (Fixr).
- BLS May 2025 mean hourly plumber wages: Houston $30.70, Austin $30.65, Dallas-Fort Worth $29.94, San Antonio $27.87, Jacksonville $28.00, Miami $27.80, Orlando $26.92, Tampa $26.73; national $34.70.
- Water heater installation averages about $1,400 (Fixr, Jan. 2026); Gulf Coast installs run 10 to 20 percent above average and South Florida about 20 percent below (This Old House, Home Depot data).
- Slab leak repair: $1,000 to $4,000, about $2,500 average (Fixr, May 2025).
- Whole-house repipe: $1,500 to $15,000, about $7,500 average (Bob Vila citing Angi and HomeAdvisor).
- Sewer line replacement: $1,253 to $4,701, about $2,914 average (Bob Vila citing Angi and HomeAdvisor).
- TSBPE does not regulate plumbers' prices; Texas estimates should show the Responsible Master Plumber's license number.
- Florida contracts over $2,500 on homes of up to four units must carry a lien law warning (Fla. Stat. 713.015).
How we built this price guide (read this first)
Most plumbing price pages give one national number with no date and no source. We did it differently, and we want you to know exactly what these numbers are and are not.
- Every price has a named source and a date. Most come from Fixr cost guides updated between January 2025 and January 2026, which Fixr says are built from pricing databases, licensed contractors and industry experts. Some come from Bob Vila cost guides that cite Angi and HomeAdvisor project data, and from This Old House, which uses Home Depot installation data.
- These are national ranges. We could not find a published, dated plumbing price survey specific to Texas or Florida that we were able to verify. Where a source gives a regional adjustment (for example, This Old House on water heaters), we report it.
- For local labor, we use federal wage data. The Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics program publishes what plumbers earn in each metro area. Wages are not the hourly rate a company bills you, but they show whether local labor costs run above or below the national level.
- Ranges are typical, not limits. Emergencies, hard access, code upgrades, permits and premium fixtures can push a job above the range. Simple jobs can come in below it.
- Prices are not regulated. The Texas State Board of Plumbing Examiners (TSBPE) says it does not regulate prices plumbers charge, and Florida's Department of Business and Professional Regulation (DBPR) says fee and price disputes may fall outside its authority.
Use this page to judge whether a quote is in a normal range, to budget, and to know what questions to ask. Then get two or three written quotes.
How much does a plumber charge per hour in Texas and Florida?
Nationally, Fixr's January 2025 guide puts plumber rates at $75 to $150 an hour, with a national average of about $90. The full spread runs from about $45 an hour (a small job in a slow season) to $200 an hour (a master plumber on complex work). Bob Vila's guide, citing Angi and HomeAdvisor, gives the same $45 to $200 hourly spread and puts the typical total cost of hiring a plumber at $180 to $489, with a national average of $331.
| Who does the work | Hourly rate (Fixr, Jan. 2025) | Notes for Texas and Florida |
|---|---|---|
| Apprentice | $20 to $40 | In Texas, a registered Plumber's Apprentice may only do plumbing under direct supervision with a licensee on site; you usually pay the supervisor's rate |
| Journeyman | $45 to $90 | Texas journeyman exam requires at least 8,000 hours of experience |
| Master plumber | $70 to $200 | In Texas, every business offering plumbing must have a Responsible Master Plumber; in Florida, plumbing contractors are certified (CF) or registered (RF) by DBPR |
Service call and trip fees
Many companies charge a fee just to come out and diagnose. Fixr reports service call fees of $50 to $300: about $50 to $150 for journeyman-level calls and $150 to $300 for master plumbers. Bob Vila reports $100 to $350, which often covers the first hour. Some companies waive it if you hire them for the repair. Ask on the phone: "What is your service call fee, what does it include, and is it credited toward the repair?"
Flat-rate pricing
Many residential companies price by the job instead of by the hour. Fixr gives examples like a flat fee to unclog a drain or set a toilet, and flat rates for the first two hours with hourly billing after that. Flat rates protect you from a slow technician, but they also build in the company's margin for jobs that go wrong. Comparing two flat-rate quotes for the same scope is the fairest test.
How do Texas and Florida labor costs compare with the national average?
The best public measure of local plumbing labor is BLS wage data for plumbers, pipefitters and steamfitters (occupation code 47-2152). The May 2025 estimates show every major Texas and Florida metro below the national mean hourly wage of $34.70.
| Metro area | Mean hourly wage (May 2025) | Median hourly wage | Mean vs national |
|---|---|---|---|
| Houston-The Woodlands-Sugar Land | $30.70 | $29.47 | About 12% lower |
| Austin-Round Rock-San Marcos | $30.65 | $30.20 | About 12% lower |
| Dallas-Fort Worth-Arlington | $29.94 | $29.45 | About 14% lower |
| San Antonio-New Braunfels | $27.87 | $27.97 | About 20% lower |
| Jacksonville | $28.00 | $28.33 | About 19% lower |
| Miami-Fort Lauderdale-West Palm Beach | $27.80 | $27.77 | About 20% lower |
| Orlando-Kissimmee-Sanford | $26.92 | $26.62 | About 22% lower |
| Tampa-St. Petersburg-Clearwater | $26.73 | $25.00 | About 23% lower |
| United States | $34.70 | $30.67 |
Statewide, BLS puts the Texas mean at $29.22 an hour and Florida at $26.94, roughly 16 percent and 22 percent below the national mean on an annual basis.
What this does and does not tell you
Wages are only part of what a plumbing company bills. The rest covers trucks, fuel, tools, parts markup, office staff, permits, warranty callbacks and insurance. Texas, for example, requires a Responsible Master Plumber to carry commercial general liability insurance of at least $300,000 (Occupations Code 1301.552). So a lower wage market does not mean prices are 20 percent lower. But it does mean Texas and Florida labor is not more expensive than the national average, and a quote far above national ranges deserves a second opinion.
Are plumbing prices higher in Miami or Austin?
By plumber wages, no: Austin is tied with Houston for the highest Texas metro wage in the table, and Miami falls in the middle of the Florida metros. On specific jobs, regional data is thin. For water heater installations, This Old House, using Home Depot data, reports Gulf Coast installations running 10 to 20 percent above the national average of $1,950, while South Florida runs about 20 percent below it. Local permit rules, demand after storms or freezes, and access problems (high-rise condos, slab foundations) often matter more than the city name.
Plumbing price table: 40+ common jobs
All figures are national typical ranges including parts and labor unless noted. Check the linked guides for what drives the high and low ends.
Leaks, clogs and repairs
| Job | Typical range | Source and date |
|---|---|---|
| Leaking pipe repair (accessible) | $150 to $350 | Fixr, Jan. 2025 |
| Leaky shower faucet | $75 to $200 | Fixr, Jan. 2025 |
| Shower repair (valve, drain, head) | $100 to $700; about $350 average | Fixr, Jan. 2025 |
| Toilet repair (flapper, fill valve, wax ring) | $60 to $200; about $125 average | Fixr, Jan. 2025 |
| Unclog a toilet | $200 to $700; about $350 average | Fixr, Jan. 2025 |
| Unclog a drain | $100 to $500 | Fixr, Jan. 2025 |
| Unclog a kitchen sink | $250 to $400; about $300 average | Fixr, Aug. 2025 |
| Clear a main sewer line clog | $350 to $650; about $475 average | Fixr, Jan. 2025 |
| Sewer camera inspection during a clog call | $100 to $800; up to $1,500 for the whole system | Fixr, Jan. 2025 |
| Drain line breakage repair | $400 to $1,500; about $600 average | Fixr, Jan. 2025 |
| Garbage disposal repair | $100 to $250; about $200 average | Fixr, Aug. 2025 |
| Water heater repair | $150 to $750; about $450 average | Fixr, Aug. 2025 |
| Water heater thermostat repair | $75 to $150 | Fixr, Aug. 2025 |
| Valve replacement | $150 to $800 | Fixr, Jan. 2025 |
| Replace pipes under a kitchen sink | $150 to $325 | Fixr, Jan. 2025 |
| Water main (service line) repair | $500 to $2,000; about $1,000 average | Fixr, Jan. 2025 |
| Slab leak repair | $1,000 to $4,000; about $2,500 average; about $600 low (detection plus epoxy) to $15,000 high (rerouting all pipes to the attic) | Fixr, May 2025 |
| Septic tank repair | $750 to $3,000; about $2,000 average | Fixr, Jan. 2025 |
| Broken sprinkler repair | $100 to $400 | Fixr, Jan. 2025 |
| Pool leak detection and simple repair | $100 to $500 | Bob Vila citing Angi, Aug. 2023 |
| Pool pipe or main drain line leak | $500 to $1,500 | Bob Vila citing Angi, Aug. 2023 |
Fixture and appliance installation
| Job | Typical range | Source and date |
|---|---|---|
| Toilet installation | $250 to $800; about $450 average | Fixr, Jan. 2026 |
| Toilet installation (alternate data) | $224 to $532; about $372 average | Bob Vila citing Angi and HomeAdvisor, Feb. 2023 |
| Kitchen faucet installation | $150 to $400; about $300 average | Fixr, Feb. 2025 |
| Sink installation | $400 to $1,000; about $600 average | Fixr, Aug. 2025 |
| Garbage disposal installation | $300 to $600; about $500 average | Fixr, Jan. 2025 |
| Outdoor spigot installation | $150 to $500; about $200 typical | Fixr, Jan. 2025 |
| Outdoor spigot replacement | $50 to $100 | Fixr, Jan. 2025 |
| Water softener installation | $1,100 to $3,000; about $2,500 average | Fixr, Jan. 2025 |
| Sump pump installation | $800 to $2,000; about $1,400 average | Fixr, Jan. 2025 |
| Gas line installation | $500 to $2,000; about $800 average | Fixr, Aug. 2025 |
| Rough-in plumbing per fixture (remodel) | $450 to $650 | Fixr, Jan. 2025 |
| Move a bathroom fixture more than 3 feet | $450 to $1,200 per fixture | Fixr, Jan. 2025 |
Water heaters
| Job | Typical range | Source and date |
|---|---|---|
| Water heater installation, overall | $900 to $3,000; about $1,400 average | Fixr, Jan. 2026 |
| Water heater replacement (alternate data) | $874 to $1,765; about $1,293 average | Bob Vila citing Angi and HomeAdvisor |
| Water heater installation (Home Depot data) | About $1,950 average; $1,600 to $5,400 range; tankless about $2,800 | This Old House, 2026 |
| 50-gallon electric tank, installed | $700 to $1,900 | Fixr, Jan. 2026 |
| 50-gallon gas or propane tank, installed | $900 to $2,500 | Fixr, Jan. 2026 |
| 50-gallon heat pump (hybrid), installed | $2,000 to $5,500 | Fixr, Jan. 2026 |
| Thermal expansion tank add-on | $150 to $400 | Fixr, Jan. 2026 |
| Old tank haul-away | $50 to $150 | Fixr, Jan. 2026 |
| Converting electric to gas (new gas line) | Adds $1,500 to $2,300 | This Old House, 2026 |
Big projects: repipes, sewer and water lines
| Job | Typical range | Source and date |
|---|---|---|
| Repipe a house | $1,500 to $15,000; about $7,500 average | Bob Vila citing Angi and HomeAdvisor |
| Replace all plumbing, 2,000 sq. ft. house | $4,000 to $12,000 (about $2 to $6 per sq. ft.) | Fixr, Jan. 2025 |
| Pipe materials: copper / PEX / CPVC per linear foot | $2 to $8 / $0.40 to $2 / $0.50 to $1 | Bob Vila |
| Sewer line replacement | $1,253 to $4,701; about $2,914 average | Bob Vila citing Angi and HomeAdvisor |
| Replace a 10-foot section of main sewer line | Up to about $2,750 | Fixr, Jan. 2025 |
| Main water line installation or replacement | $1,500 to $12,000; about $3,750 average | Fixr, Aug. 2025 |
| Main water line per linear foot: trenchless / dig and backfill | $75 to $150 / $175 to $225 | Fixr, Aug. 2025 |
| Bathroom remodel plumbing | $2,000 to $10,000 | Fixr, Jan. 2025 |
| Kitchen remodel plumbing | $4,000 to $8,000 | Fixr, Jan. 2025 |
Inspections
| Inspection | Typical range | Source and date |
|---|---|---|
| Full home inspection | $300 to $500; about $400 average | Fixr, Jan. 2025 |
| Plumbing portion of a home inspection | $100 to $225 | Fixr, Jan. 2025 |
| Four-point inspection (Florida insurance) | About $125 | Fixr, Jan. 2025 |
| Sewer inspection (specialty) | $200 to $1,000 | Fixr, Jan. 2025 |
| Septic inspection | $150 to $300 | Fixr, Jan. 2025 |
| Well inspection | $300 to $500 | Fixr, Jan. 2025 |
| Lead testing | $350 to $500 | Fixr, Jan. 2025 |
| Pool inspection | $150 to $300 | Fixr, Jan. 2025 |
How much does it cost to fix a leak?
"A leak" can mean a $10 washer or a $15,000 reroute. The price depends almost entirely on where the leak is and how much you have to open up to reach it.
| Where the leak is | Typical cost | What drives the price |
|---|---|---|
| Faucet drip, toilet flapper, supply line under a sink | Often under $200 professionally (toilet repair $60 to $200, Fixr) | Parts are cheap; you mostly pay the service call |
| Exposed pipe in a garage, attic or under a sink | $150 to $350 (Fixr, leaking pipe repair) | Pipe material; number of joints |
| Inside a wall or ceiling | Pipe repair plus drywall, paint and possible water mitigation | Opening and closing the wall is often more than the plumbing |
| Under the slab | $1,000 to $4,000 typical (Fixr, slab leak) | Tunneling $900 to $2,000, breaking slab $500 to $3,000, patching $250 to $800, or rerouting |
| Buried service line in the yard | $500 to $2,000 (Fixr, water main repair) | Depth, length, driveway or landscaping in the way |
Finding a hidden leak is usually billed separately from fixing it. If your water bill jumped with no visible leak, start with our high water bill guide and leak detection guide. For under-slab leaks, see our slab leak guide.
How much does it cost to replace a water heater in Texas or Florida?
National data from three sources lands in a similar band for a standard tank replacement:
- Fixr (January 2026): about $1,400 average, most paying $900 to $3,000.
- Bob Vila citing Angi and HomeAdvisor: $874 to $1,765, about $1,293 average.
- This Old House using Home Depot data: about $1,950 average, with Gulf Coast installs 10 to 20 percent above average and South Florida about 20 percent below.
Local add-ons that change the bill
- Permits. Houston requires a permit pulled by a city-registered master plumber for water heater replacement. The Houston Permitting Center's fee page lists $34.24 for the first three heaters and $11.41 for each additional one, with a $97.56 minimum; other city pages have shown a $91.05 minimum, so confirm the current fee. Jacksonville requires permits for water heater replacement, and Tampa covers same-location replacements with a plumbing trade permit. Fixr says water heater permits and inspections range from $25 to $1,500 nationally.
- Expansion tank. A. O. Smith's manuals say properly sized thermal expansion tanks are required on all closed water systems. Fixr puts adding one at $150 to $400.
- Relief valve discharge piping. The manufacturer requires the relief valve discharge pipe to end within 6 inches above an adequate floor drain or outside the building. Correcting a bad discharge line adds labor.
- Venting and gas lines for gas units, and electrical work for heat pump units.
Plan for 2029
The Department of Energy's May 2024 rule requires electric storage water heaters over 35 gallons made on or after May 6, 2029 to meet efficiency levels that DOE says are currently met only with heat pump technology. ENERGY STAR says a certified heat pump water heater can save a four-person household about $330 a year at 12 cents per kWh. See our water heater replacement cost guide and tank vs tankless vs heat pump guide.
How much does it cost to repipe a house?
Bob Vila's guide, citing Angi and HomeAdvisor, puts a whole-house repipe at $1,500 to $15,000, with a national average of about $7,500. Fixr's January 2025 guide estimates replacing the plumbing in a 2,000-square-foot house at $4,000 to $12,000, or about $2 to $6 per square foot depending on material and access.
| House size | Fixr estimate (Jan. 2025) |
|---|---|
| 1,000 sq. ft. | $2,000 to $6,000 |
| 1,500 sq. ft. | $3,000 to $9,000 |
| 2,000 sq. ft. | $4,000 to $12,000 |
| 2,500 sq. ft. | $5,000 to $15,000 |
| 3,000 sq. ft. | $6,000 to $18,000 |
Material matters: Bob Vila lists copper at $2 to $8 per linear foot, PEX at $0.40 to $2 and CPVC at $0.50 to $1 for materials alone. In Texas and Florida, many slab homes are repiped through the attic, which avoids breaking the slab but adds drywall patching. Florida owners often repipe to replace polybutylene or galvanized lines that insurers flag on four-point inspections. Tampa's plumbing trade permit covers interior repipes without plan review. See our PEX vs copper repipe guide and polybutylene and insurance guide.
How much does sewer line replacement cost?
Bob Vila's guide, citing Angi and HomeAdvisor, puts typical sewer line replacement at $1,253 to $4,701, with a national average of about $2,914. That covers many single-family replacements; long runs, deep lines, lines under driveways or slabs, and cast iron drains inside the house can go well above it.
- Clearing a clog first: $350 to $650, about $475 average for hydro jetting a mid-sized clog (Fixr, January 2025). Chemical treatment can be as low as $75.
- Camera inspection: $100 to $800 during a clog call, up to $1,500 for the entire system (Fixr).
- Spot repair: replacing a 10-foot section can cost up to about $2,750 (Fixr). Drain line breakage repair overall runs $400 to $1,500, about $600 average (Fixr).
In Florida, cast iron drain disputes are common in insurance claims. Insurance Journal reported in 2022 that one plaintiffs' firm cited $20,000 to $100,000 to replace a home's drain pipes, a marketing claim, not a cost study, while defense engineers said full replacement is often unnecessary. Get a camera inspection and a written scope before accepting a full replacement. See our sewer line repair and replacement guide and Florida cast iron guide.
How much does slab leak repair cost?
Fixr's May 2025 guide puts most slab leak repairs at $1,000 to $4,000, with a national average of about $2,500. The low end, about $600, is leak detection plus an epoxy repair. The high end, about $15,000, is rerouting all pipes from under the slab to the attic.
| Component | Fixr range (May 2025) |
|---|---|
| Tunneling under the slab | $900 to $2,000 |
| Breaking through the slab | $500 to $3,000 |
| Patching concrete | $250 to $800 |
| Pipe repair under the slab | $200 to $2,000 |
A foundation-focused Bob Vila article lists slab leak repair at $630 to $4,400, a slightly different range from a different dataset. Most standard homeowners policies in Texas treat damage to foundations or slabs as an optional endorsement, according to the Texas Department of Insurance, so read your policy before assuming the tear-out is covered. See our slab leak guide.
How much does drain cleaning cost?
| Drain problem | Typical cost (Fixr) |
|---|---|
| Single sink, tub or shower drain | $100 to $500 (Jan. 2025) |
| Kitchen sink | $250 to $400, about $300 (Aug. 2025) |
| Toilet | $200 to $700, about $350 (Jan. 2025) |
| Main sewer line | $350 to $650, about $475 (Jan. 2025) |
The farther down the line the clog sits, the more it costs: a clog at the trap takes minutes, while a main line blockage needs a large machine or hydro jetting and sometimes a camera. If several fixtures back up at once, or water comes up in a tub when you flush, it is a main line problem. Fixr notes some companies add a premium of $45 to $200 to the normal hourly rate for after-hours sewer work. See our clogged drains guide and main sewer line clog guide.
How much does it cost to install a water softener or a toilet?
Water softener
Fixr's January 2025 guide puts water softener installation at $1,100 to $3,000, with a national average of about $2,500. The most common type is a salt-based ion exchange system with a resin tank and brine tank; salt-free conditioners and whole-house filters are priced differently. Hardness varies widely across Texas and Florida, so test your water before buying. See our hard water and softeners guide.
Toilet installation
Fixr's January 2026 guide puts toilet installation at $250 to $800, with an average of about $450 including the toilet and labor. Bob Vila's figures, citing Angi and HomeAdvisor, are $224 to $532, about $372 average. Fixr's plumber guide puts the labor portion near $120 when the lines and drain are already in place. Costs climb when the flange is broken, the floor under the toilet is soft from a past leak, or the toilet is wall-hung.
Replacing an older toilet can cut water bills. EPA says old toilets can use as much as 6 gallons per flush, the federal standard is 1.6, and WaterSense toilets use 1.28 or less; replacing old toilets with WaterSense models can save a family nearly 13,000 gallons and more than $170 a year. See our toilet problems guide.
How much does an emergency plumber cost?
Fixr's January 2025 guide says emergency work usually carries a higher hourly rate, with $150 an hour as a standard figure, plus a transportation fee of $50 to $200 and a flat emergency call-out fee of $200 to $300. Nights, weekends and holidays cost more, and some companies charge extra on very busy nights, such as a hard freeze when many water heaters and pipes fail at once.
Spend less in an emergency
- Shut off the water first. Know where your main shutoff is. Austin Water notes it is typically on the owner's side of the meter box. Stopping the water can turn a 2 a.m. emergency into a next-morning repair at normal rates.
- Protect the property. The Texas Department of Insurance warns an insurer may deny a claim if you do not take reasonable steps to protect property, such as shutting off water at the main after a sudden leak.
- Ask about fees on the phone: call-out fee, hourly rate, minimum charge, and whether the first hour is included.
- Get the scope in writing before work starts, even in an emergency. A text or email counts.
After a sudden water loss, see our burst pipe guide and water damage claim guide. In Florida, assignment of post-loss insurance benefits is prohibited for policies issued on or after January 1, 2023 (Fla. Stat. 627.7152), so be wary of anyone asking you to sign over your claim.
A worked example: what a water heater replacement bill in Houston might include
Here is how the sourced numbers on this page fit together on a real invoice. This is an illustration built from national ranges and Houston's published permit fee, not a quote.
| Line item | Range used | Source |
|---|---|---|
| 50-gallon gas tank heater, installed (unit plus standard labor) | $900 to $2,500 | Fixr, Jan. 2026 |
| Houston water heater permit, one heater | Minimum fee listed as both $91.05 and $97.56 on the city page, plus a $33.56 admin fee (confirm current schedule) | Houston Permitting Center |
| Thermal expansion tank, if the system is closed | $150 to $400 | Fixr, Jan. 2026 |
| Haul-away of the old tank | $50 to $150 | Fixr, Jan. 2026 |
| Correcting the relief valve discharge pipe or a seized shutoff | Often priced as extra labor; see hourly rates above | Fixr, Jan. 2025 |
Add it up and a straightforward like-for-like gas replacement with a permit, an expansion tank and haul-away plausibly lands around $1,200 to $3,150 before any venting or code corrections. If your quote is far outside that band, ask what is different: a larger or high-efficiency unit, a tight attic, a new gas line, or venting changes, which Fixr says can add thousands of dollars when a new direct-vent or power-vent system is needed. If two quotes are close in price but one leaves out the permit or the expansion tank, the cheaper-looking one may not be cheaper.
What your final invoice should show
- The company name and, in Texas, the Responsible Master Plumber's license number; in Florida, the CF or RF license number.
- The make, model, size and serial number of any equipment installed.
- The permit number and final inspection result, if a permit was required.
- Parts and labor broken out, and any trip, service or disposal fees.
- Warranty terms for both parts and labor, and who to call under warranty.
Keep the invoice. Buyers, insurers and four-point inspectors in Florida all ask about water heater age and condition, and a dated invoice answers the question.
What it costs to run a water heater each year
Purchase price is only part of the cost. Fixr's January 2026 guide estimates annual operating costs for a 50-gallon unit at:
| Type | Estimated annual operating cost (Fixr, Jan. 2026) |
|---|---|
| Standard electric tank | $600 to $750 |
| Gas tank | $325 to $475 |
| Heat pump (hybrid) | $225 to $350 |
| Solar with backup | $100 to $250 |
ENERGY STAR says a certified heat pump water heater pays back its extra cost in about two years for a four-person family, and saves about $3,500 over its life. Your real numbers depend on your utility rates and how much hot water your household uses.
DIY or hire a pro: where the savings are real
Both states allow homeowners to do some of their own plumbing. Texas Occupations Code 1301.051 exempts a property owner doing plumbing in the owner's own homestead from licensing, though Houston's amendments still require the owner to get permits and pay fees. Florida's owner-builder exemption lets owners who personally supervise work improve their own one- or two-family home that is not offered for sale or lease; a sale or lease within a year of completion creates a presumption the work was for sale.
| Usually good DIY | Usually hire a licensed plumber |
|---|---|
| Toilet flapper or fill valve | Water heater replacement (permits, gas, venting, relief valve piping) |
| Faucet aerator, showerhead, supply line under a sink | Gas lines of any kind |
| Hose bib washer, vacuum breaker | Slab leaks, repipes, sewer lines |
| Disposal splash guard, unjamming with the hex wrench | Anything inside walls or under floors |
| Running the meter leak test | Backflow testing (requires a licensed tester in Texas) |
The most expensive DIY mistakes are the ones that cause water damage. A failed fitting inside a wall can cost far more in drywall, flooring and mold cleanup than the plumber you saved. If you DIY, know exactly where your shutoff is before you start.
Why do plumbing prices vary so much between companies?
Two honest companies can quote very different prices for the same job. The reasons:
- Scope differences. One quote includes the permit, expansion tank, new shutoff valve and haul-away; the other does not. Line up the scopes before comparing totals.
- Who does the work. Master-level work bills higher than journeyman work. In Texas, a Tradesman Plumber-Limited may work only on one- and two-family homes under a Responsible Master Plumber.
- Parts quality. Builder-grade vs premium valves, fixtures and water heaters, and longer warranties.
- Pricing model. Flat-rate companies price in their risk; hourly companies pass it to you.
- Overhead. Insurance, trucks, dispatch, 24-hour service and warranty callbacks all cost money.
- Access and condition. A heater in a hot attic, a corroded shutoff that snaps, or a slab that has to be tunneled changes everything.
- Code upgrades. Replacing equipment can trigger current code requirements. In Florida, the building code in effect on the date of the permit application governs the work (Fla. Stat. 553.73).
- Timing. Busy seasons, freezes and hurricanes push prices up. Fixr notes rates are lower in slow times of year.
How to get a fair quote and avoid overpaying
- Verify the license. In Texas, check the Responsible Master Plumber's license on the TSBPE public search; master plumber license numbers begin with "M." TSBPE advises getting written estimates that show the RMP's license number and TSBPE contact information. In Florida, verify the CF or RF license at myfloridalicense.com.
- Get two or three written quotes with the same scope.
- Ask what is included: permit, inspection, haul-away, drywall or concrete patching, warranty length on parts and labor.
- Be careful with deposits in Florida. Florida contractors who take more than 10 percent of the price as an initial payment on residential work must apply for permits within 30 days and start work within 90 days after permits issue, unless there is just cause or a written agreement (Fla. Stat. 489.126).
- Look for the lien warning on larger Florida jobs. Direct contracts over $2,500 on homes of up to four units must include a statutory lien law warning on the first page (Fla. Stat. 713.015). Jobs of $2,500 or less are exempt from most of the lien law.
- Know your cancellation rights. In Florida, home solicitation sales over $25 signed away from the seller's place of business can usually be canceled until midnight of the third business day, but sales from your own request for specific services are excluded. Texas exempts plumbing services you initiated from its home solicitation law, except for breach of express warranty or negligent installation (Occupations Code 1301.004).
- Pay by traceable methods and get a final invoice listing the work, parts, permit number and warranty.
If something goes wrong, see our plumber complaints guide and plumbing scams guide. For hiring step by step, see how to hire a plumber.
What permits and inspections add to the bill
Permit fees are small compared to most plumbing jobs, but reinspections and code corrections add up. Bob Vila's guide estimates plumbing permits at $30 to $500 nationally, and Fixr puts water heater permits and inspections at $25 to $1,500.
| Place | What needs a permit (examples) | Notes |
|---|---|---|
| Texas cities over 5,000 people | Plumbing work generally, except repairing leaks and replacing faucets, ballcocks, disposals or toilets | Occupations Code 1301.551; cities must accept permit applications by phone, fax or email |
| Houston | Water heater replacement and installation | Permit pulled by a master plumber registered with the city; fee schedule above |
| Miami-Dade County | Most new plumbing work | Repairs by a licensed plumbing contractor up to $500 are exempt; removing and replacing concealed pipe is new work needing a permit |
| Tampa | Water heater replacement, outside water or sewer replacement, interior repipe, like-for-like fixtures | Covered by a plumbing trade permit without plan review |
| Jacksonville | Water heater replacement | Fixture replacement after the stop is exempt; a failed inspection carries a $45 reinspection fee |
See our plumbing permits and DIY rules guide for DIY rules and homestead exemptions.
Costs for landlords and property managers
Landlords face a few extra cost rules:
- Texas repair timing. After proper notice, Texas sets a rebuttable presumption that seven days is a reasonable time to repair a condition that materially affects health or safety (Property Code 92.056). If a landlord fails to repair, a tenant may in some cases repair and deduct up to the greater of one month's rent or $500 per month, using a licensed contractor where the city requires one (92.0561).
- Texas hot water. Landlords must repair a landlord-supplied hot water device that fails to supply water of at least 120 degrees, after notice (92.052).
- Florida duties. Where no local code applies, Florida landlords must keep plumbing in reasonable working condition, and in buildings other than single-family homes and duplexes must provide running water and hot water unless agreed otherwise in writing (Fla. Stat. 83.51).
- Preventive spending pays. EPA's WaterSense program says the average household's leaks waste more than 9,300 gallons a year. Replacing toilet flappers at least every five years, as EPA suggests, costs little compared to a tenant's running toilet for months.
See our Texas landlord guide, Florida landlord guide and landlord maintenance checklist.
How to cut plumbing costs without cutting corners
- Learn your shutoffs: the main, each fixture's shutoff valves, the water heater cold supply, and the irrigation isolation valve.
- Bundle small jobs into one visit to pay one service call.
- Replace before failure when it makes sense: a water heater near the end of its typical 10 to 15 year life (Fixr) or a disposal near 10 to 12 years.
- Prevent freeze damage in Texas with the Red Cross steps: drip faucets served by exposed pipes, keep the thermostat steady day and night, and do not set it below 55 degrees when away.
- Keep grease out of drains to avoid repeat clog calls.
- Use grants where they exist. In Miami-Dade, the Septic-to-Sewer program offers eligible homesteaded owners grant assistance of up to $15,000 toward connection, under program rules. Florida DEP's Septic Upgrade Incentive Program has paid up to $10,000 toward nitrogen-reducing upgrades in designated areas when pre-approved.
- Check rebates from your electric or water utility for heat pump water heaters, WaterSense toilets and smart irrigation controllers.
Our plumbing maintenance calendar lays out a year of low-cost maintenance.
Find the detailed guide for your job
- Water heaters: water heater replacement cost, tank vs tankless vs heat pump, leaking water heater
- Leaks: slab leaks, leak detection, burst pipes
- Drains and sewer: clogged drains, main line clogs, sewer camera inspection, sewer line replacement
- Pipes: repiping, polybutylene, galvanized pipe
- Fixtures: toilets, faucets, garbage disposals
- Outdoor: sprinklers and hose bibs, backflow testing, pool leaks
- Buying and selling: buyer checklist, selling with plumbing issues
- Insurance: what insurance covers
- State guides: Texas plumbing guide, Florida plumbing guide, and the main plumbing guide
How to choose a provider
- Find and test your main water shutoff before you ever need a plumber.
- Ask about service call, trip and minimum fees before booking.
- Verify the license: TSBPE in Texas, DBPR in Florida.
- Get two or three written quotes with the same scope.
- Confirm what is included: permit, haul-away, patching, warranty.
- Compare totals to the dated ranges in this guide.
- Limit deposits, especially in Florida over 10 percent.
- Bundle small repairs into one visit.
- Keep invoices with permit numbers for insurance and resale.
- Check utility rebates and local grant programs before big projects.
Related plumbing guides
- How Much Does It Cost to Replace a Water Heater, and Why Is My Quote Higher Than the Store Price?
- Slab Leaks in Texas and Florida: What Are the Signs, Fixes, Costs and Insurance Rules?
- How Much Does It Cost to Repipe a House, and Should You Use PEX, Copper or CPVC?
- Should I Repair, Line or Replace My Sewer Line, and What Does Each Method Cost?
- How Do You Hire a Plumber in Texas or Florida and Check the License?
- What Are the Most Common Plumbing Scams, and How Do You Protect Yourself?
- Does Homeowners Insurance Cover Plumbing Leaks? Sudden vs Gradual Damage in Texas and Florida
- How Do I Unclog a Kitchen Sink, Bathroom Sink, Shower or Tub Drain?
Plumbing by state and city
Questions people ask
What is the average cost of a plumber visit?
Bob Vila's guide, citing Angi and HomeAdvisor, puts the typical cost of hiring a plumber at $180 to $489, with a national average of $331. Small repairs may cost little more than the service call fee, which Fixr reports at $50 to $300. Bigger jobs like water heater or sewer work are priced separately. Texas and Florida plumber wages run below the national average in BLS data.
Is it cheaper to hire a handyman for plumbing?
Sometimes for tiny tasks, but be careful. In Texas, plumbing for hire must be done under a licensed plumber with a Responsible Master Plumber, and unlicensed plumbing is a Class C misdemeanor. In Florida, contracts with unlicensed contractors are unenforceable by the contractor, and unlicensed contracting is a crime. Insurance claims can also be harder when the work was unlicensed.
Do plumbers charge for estimates?
Many charge a service call or diagnostic fee, often $50 to $300 according to Fixr, and some credit it toward the repair. Others give free estimates for larger planned projects like repipes or water heater replacements. Ask before the visit. A written estimate in Texas should show the Responsible Master Plumber's license number, according to TSBPE.
How much should a water heater replacement cost in Houston or Miami?
National data centers around $1,300 to $1,950 for a standard tank, depending on the source. This Old House reports Gulf Coast installs running 10 to 20 percent above the national average and South Florida about 20 percent below. Houston also requires a permit pulled by a city-registered master plumber. Get two written quotes with the same scope.
Why did my plumber charge a trip fee and an hourly rate?
Many companies charge a trip or service fee to cover travel and diagnosis, then bill labor separately once the repair starts. Fixr reports transportation fees of $50 to $200 for emergency calls. Ask whether the trip fee includes the first hour and whether it is credited toward the work. It should be on the written estimate.
Are plumbing costs tax-deductible?
Ordinary repairs on your own home are generally not deductible. Rental property repairs may be a business expense, and some energy-efficient equipment has had federal tax credits, but rules change and depend on your situation. Ask a tax professional or check IRS guidance before you count on a deduction.
Does homeowners insurance pay for plumbing repairs?
Usually not for the repair of the failed pipe or appliance itself, but often for sudden and accidental water damage it causes, according to the Texas Department of Insurance. Gradual leaks and seepage are commonly excluded, and slab and sewer backup coverage are often optional endorsements. Florida claims must be reported within one year of the date of loss. See our insurance guide.
How can I tell if a plumbing quote is too high?
Compare it to the dated national ranges on this page, then compare scopes line by line with a second quote. A quote far above the range should come with a clear reason, such as hard access, code upgrades or premium parts. Be wary of pressure tactics, demands for large cash deposits, or refusal to put the scope and license number in writing.
What plumbing jobs can I do myself to save money?
Swapping a toilet flapper, a showerhead, a faucet aerator, a hose bib washer or a disposal splash guard are common DIY tasks. In Texas, a homeowner may do plumbing on their own homestead, and Houston still requires permits for permitted work. Florida's owner-builder exemption covers your own home under conditions. Gas lines and water heaters are best left to licensed pros.
Do prices go up after a freeze or hurricane?
Demand spikes after events like the February 2021 Texas freeze, and some plumbers add surcharges on busy nights, according to Fixr. In Florida, contracting without a license during a declared state of emergency is a third-degree felony. Get written quotes, verify licenses, and report price gouging during emergencies to the state attorney general.
Sources
- Fixr: Plumber cost guide (updated Jan. 30, 2025)
- Fixr: Water heater installation cost (updated Jan. 27, 2026)
- Fixr: 50-gallon water heater installation cost (updated Jan. 26, 2026)
- Fixr: Water heater repair cost (updated Aug. 29, 2025)
- Fixr: Slab leak repair cost (updated May 1, 2025)
- Fixr: Drain line breakage repair cost (updated Jan. 31, 2025)
- Fixr: Unclog main sewer line cost (updated Jan. 31, 2025)
- Fixr: Unclog kitchen sink cost (updated Aug. 29, 2025)
- Fixr: Unclog toilet cost (updated Jan. 31, 2025)
- Fixr: Toilet installation cost (updated Jan. 28, 2026)
- Fixr: Toilet repair cost (updated Jan. 31, 2025)
- Fixr: Kitchen faucet installation cost (updated Feb. 7, 2025)
- Fixr: Sink installation cost (updated Aug. 29, 2025)
- Fixr: Shower repair cost (updated Jan. 31, 2025)
- Fixr: Garbage disposal installation cost (updated Jan. 31, 2025)
- Fixr: Garbage disposal repair cost (updated Aug. 29, 2025)
- Fixr: Water softener cost (updated Jan. 31, 2025)
- Fixr: Sump pump cost (updated Jan. 31, 2025)
- Fixr: Gas line installation cost (updated Aug. 29, 2025)
- Fixr: Main water line installation cost (updated Aug. 29, 2025)
- Fixr: Water main repair cost (updated Jan. 31, 2025)
- Fixr: Septic tank repair cost (updated Jan. 31, 2025)
- Fixr: Outdoor spigot installation cost (updated Jan. 31, 2025)
- Fixr: Sprinkler system cost (updated Jan. 31, 2025)
- Fixr: Home inspection cost (updated Jan. 31, 2025)
- Bob Vila: How much does a plumber cost (updated June 2023)
- Bob Vila: Toilet installation cost (Feb. 2023)
- Bob Vila: Pool leak repair cost (Aug. 2023)
- Bob Vila: Water heater replacement cost
- Bob Vila: Cost to repipe a house
- Bob Vila: Sewer line replacement cost
- Bob Vila: Slab leak / foundation repair cost
- This Old House: Water heater installation cost (2026)
- BLS Occupational Employment and Wage Statistics, May 2025, SOC 47-2152 (API series for national and metro estimates)
- TSBPE: Consumer information
- TSBPE: License types (apprentice, tradesman, journeyman)
- Texas Occupations Code ch. 1301 (plumbing)
- DBPR: File a complaint
- DBPR Construction Industry Licensing Board
- Houston Permitting Center: Water heater permits
- Miami-Dade County: Permit exemptions guideline
- City of Tampa: Trade permit limitations by discipline (2025)
- Jacksonville Building Inspection Division FAQs
- Jacksonville Building Inspection Division: Inspections
- A. O. Smith water heater instruction manual
- DOE final rule: Consumer water heater standards (May 6, 2024)
- ENERGY STAR heat pump water heater fact sheet
- EPA WaterSense: Residential toilets
- EPA WaterSense: Fix a Leak Week
- Insurance Journal: Cast iron pipe claims in Florida (June 2022)
- TDI: Homeowners insurance guide (cb025)
- TDI: Water damage blog
- TDI: When are water damage and mold covered by insurance?
- Fla. Stat. 489.126 (deposits)
- Fla. Stat. ch. 713 (construction liens)
- Fla. Stat. 501.021 and 501.025 (home solicitation sales)
- Fla. Stat. 489.127 (unlicensed contracting)
- Fla. Stat. 489.128 (unlicensed contracts unenforceable)
- Fla. Stat. 627.7152 (assignment agreements)
- Fla. Stat. 627.70132 (notice of property claims)
- Fla. Stat. 553.73 (Florida Building Code)
- Tex. Prop. Code ch. 92 (landlord repairs)
- Fla. Stat. 83.51 (landlord obligations)
- Austin Water: Cold weather tips
- American Red Cross: Frozen pipes
- Miami-Dade: Septic-to-Sewer financial assistance
- Florida DEP: Septic Upgrade Incentive Program announcement
- Fla. Stat. 489.103 (owner-builder exemption)
- Houston amendments to the 2021 Uniform Plumbing Code
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


