Local Guide · Plumbing
Slab Leaks in Texas and Florida: What Are the Signs, Fixes, Costs and Insurance Rules?
A neutral guide to leaks in pipes under a concrete slab: how to spot one, how pros find it, how spot repair, reroute, repipe and epoxy lining compare, what insurance usually pays, and what sellers must disclose.
A slab leak is a leak in a water or drain pipe under or inside a home's concrete slab. Signs include a water bill spike, a meter that moves with everything off, warm spots on the floor, the sound of running water, damp flooring and new cracks. Repairs range from about $600 for detection and a small repair to $15,000 to reroute all lines through the attic (Fixr, 2025). Insurance often pays for access and water damage, not the pipe.
Key facts
- Fixr (May 2025): slab leak repair typically costs $1,000 to $4,000, national average $2,500; low end about $600, high end about $15,000 to reroute all pipes to the attic.
- Fixr: slab leak detection costs $100 to $400; breaking the slab $500 to $3,000; tunneling $900 to $2,000; patching concrete $250 to $800; pipe lining $500 to $2,000; rerouting $4,000 to $15,000.
- Bob Vila (2024) cites slab leak repair at $630 to $4,400, a different range than Fixr's, from different data.
- Bob Vila/Angi: repiping a house typically costs $1,500 to $15,000, average $7,500 (2023); PEX runs $0.40 to $2 per foot and copper $2 to $8 per foot in materials.
- TDI lists 'damage to foundations or slabs' as a common optional endorsement on Texas homeowners policies.
- Some Texas policy forms exclude constant or repeated seepage from plumbing over 14 or more days (TDI policy comparison).
- The Texas Seller's Disclosure Notice (Prop. Code 5.008) asks sellers about known defects in the foundation/slab and plumbing/sewers and about water damage not due to a flood.
- If a Texas seller does not provide the required disclosure notice before the contract, the buyer may terminate for any reason within seven days after receiving it (5.008(f)).
- EPA WaterSense: if your water meter changes at all during a two-hour period with no water use, you probably have a leak.
What is a slab leak?
Most Texas and Florida homes are built on a concrete slab foundation instead of a basement or crawl space. The water supply lines and drain lines run in the soil under that slab, and come up through it to fixtures. A slab leak is any leak in those buried pipes. There are two very different kinds:
| Type | What leaks | How you notice | Typical result |
|---|---|---|---|
| Pressurized supply leak (hot or cold) | Water supply line under pressure | Meter moves with everything off, higher bill, hissing, warm floor (hot side) | Leaks 24/7; can soak soil and flooring fast |
| Drain or sewer leak | Gravity drain pipe (cast iron, PVC or ABS) | Odors, slow drains, damp spots, pests, settling | Leaks only when drains run; damage builds slowly |
This guide focuses on supply-line slab leaks. For drain pipes under the slab, see cast iron pipes and sewer line repair.
Hot water vs cold water slab leak
A hot-side leak often shows up as a warm spot on tile or wood floors, a water heater that runs constantly, and a higher gas or electric bill along with the water bill. A cold-side leak gives no warm spot, so it often hides longer and shows up as a bill spike or wet flooring. A plumber can isolate which side is leaking by closing the water heater's cold inlet and watching the meter.
What are the signs of a slab leak?
- A water bill spike with no change in use. Fixr notes that if your use has not changed but your bill has, it is a good sign of a leak.
- The meter moves with all water off. EPA WaterSense says to check the meter before and after a two-hour period when no water is used; if it changes at all, you probably have a leak. See leak detection for the full test.
- A warm or hot spot on the floor, especially near the kitchen, bathrooms or water heater.
- The sound of running water when nothing is on.
- Damp carpet, cupped wood floors, loose tiles or musty odors. Fixr notes mold or mildew odors may be noticeable where there is no vapor barrier over the slab.
- Low water pressure together with a higher bill.
- New or widening cracks in the slab, walls or tile.
- Puddles or unusually green grass along the foundation.
- A water heater that runs all the time (hot-side leak).
Why is my floor warm in one spot?
Hot water leaking under the slab heats the concrete above it. If one area of tile is warm to bare feet and there is no radiant heat or sunlight explaining it, suspect a hot-water slab leak. Turn off the water heater's cold inlet valve for an hour; if the warm spot cools and the meter stops moving, the leak is on the hot side.
Why are slab leaks so common in Texas and Florida?
- Slab construction is the norm. More slab homes means more pipes buried under concrete.
- Expansive soils (Texas). Fixr explains that expansive soil absorbs water and expands, then shrinks as it dries, and that this movement can stress the slab and pipes and cause leaks. Shrink-swell clay is a known concern in parts of Texas, where long droughts are followed by heavy rain. A foundation engineer or the soil report for your lot can tell you whether your soil is expansive.
- Pipe material and age. Fixr notes galvanized steel and cast iron were common under slabs before the 1960s, and that copper can also corrode depending on soil, moisture and water chemistry. Copper lines that rub against concrete or rebar can wear through over time. Some homes have polybutylene, which has a history of failures. See pipe types.
- Water chemistry. Fixr says acidic water may interact badly with certain pipe materials, especially galvanized and cast iron, and in some cases copper.
- High water pressure. Pressure above what the system was built for strains joints. See water pressure.
- Florida soils. Sandy soils and high groundwater are common in Florida. Leaks in sandy soil can drain away unseen for a long time, which is one reason Florida slab leaks are often found first on the water bill.
How do plumbers detect a slab leak?
Leak detection usually comes before any concrete is cut. Common methods, often used together:
| Method | How it works | Best for |
|---|---|---|
| Meter and pressure isolation | Close valves and pressure-test hot and cold lines separately to see which one loses pressure | Confirming a leak and which side |
| Acoustic listening | Ground microphones pick up the hiss of water escaping under pressure | Pinpointing pressurized supply leaks |
| Thermal imaging | An infrared camera shows warm (or cool) patterns on the floor | Hot-water leaks |
| Tracer gas | A safe gas mix is pushed into the drained line and a sensor finds where it escapes | Small or hard-to-hear leaks |
| Line tracing and locating | Electronic locators map the pipe route under the slab | Planning the repair cut |
| Camera inspection | A camera is run through drain lines | Drain and sewer leaks, not supply lines |
Fixr puts slab leak detection at $100 to $400 depending on how invasive it is, and notes some leaks are found in minutes while others take more than an hour. Ask for the findings in writing with the marked location and the method used. You need it for insurance.
What are the repair options, and which is best?
There is no single right answer. It depends on how many leaks you have had, pipe material and age, soil, flooring, and budget. Here is a neutral comparison using Fixr's May 2025 cost data.
| Option | What it is | Typical cost (Fixr 2025) | Pros | Cons |
|---|---|---|---|---|
| Direct spot repair through the slab | Cut the floor and concrete over the leak, fix the pipe, patch | Break slab $500 to $3,000; pipe repair $200 to $2,000; patch $250 to $800; plus flooring | Fixes the exact spot; cheapest for one isolated leak | Damages flooring; does nothing for the rest of the aging pipe |
| Tunneling | Dig under the foundation from outside to reach the pipe | $900 to $2,000 | Saves expensive interior flooring | Not suitable for shifting or expansive soils, per Fixr; must be backfilled properly |
| Reroute | Abandon the leaking line and run a new one through walls or the attic | $4,000 to $15,000 to reroute all lines | Gets pipe out of the slab for good; no concrete cutting | Wall and ceiling patching; attic lines need freeze protection in Texas |
| Whole-home repipe | Replace all supply piping, usually overhead with PEX or copper | Bob Vila: $1,500 to $15,000, average $7,500 (2023) | Best when pipes are failing in many places | Highest upfront cost; drywall repairs |
| Epoxy pipe lining | Coat the inside of the existing pipe with epoxy | $500 to $2,000 | Little demolition | Fixr says it is not always an option under slabs; ask about warranty, product approval and local code acceptance |
Should I reroute or jackhammer?
A spot repair often makes sense for a first, isolated leak in otherwise sound pipe, especially when the leak is under tile you can match or flooring you plan to replace anyway. A reroute often makes sense when the leak is under hard-to-replace flooring, when it is the second leak in the same line, or when the soil is known to move. Fixr notes rerouting is often the answer when you have more than one pipe issue under the slab.
Should I repipe after my second slab leak?
Many owners do. A second leak suggests the rest of the pipe has the same age, material and soil stress. Get a camera or pressure-test assessment and compare the total cost of one more spot repair (plus flooring and the risk of another) with a reroute or repipe. See repipe: PEX vs copper.
Is epoxy pipe lining a good fix for slab leaks?
It can work in the right case, and it is less invasive. Fixr prices pipe lining at $500 to $2,000 and says it is not always an option for pipes under a slab. Questions to ask any contractor:
- Is the product approved by your local building department and the plumbing code your city uses?
- Is the lining certified for drinking water contact?
- What is the written warranty, and who backs it if the company closes?
- Will the pipe be cleaned and inspected first, and will you get before and after video?
- Will your insurer or a future buyer's inspector accept it?
Lining a badly corroded or pinholed line may not last. Compare it with a reroute quote.
How much does slab leak repair cost?
National cost guides disagree because they use different data. Use both as a sanity check, not as a quote.
| Source | Typical range | Notes |
|---|---|---|
| Fixr (May 2025) | $1,000 to $4,000, average $2,500 | Low end $600 (detection plus small epoxy repair); high end $15,000 to reroute all lines to the attic |
| Bob Vila (2024) | $630 to $4,400 | Cited in a foundation repair article |
Other costs to budget, per Fixr: replacing a water-damaged subfloor $500 to $1,000, replacing a concrete slab section $4,000 to $8,000, plumber labor $45 to $200 an hour (most pay $75 to $130), and 2 hours to 3 days of labor for the repair. Flooring replacement is often the largest hidden cost of a direct repair. Your city may require a permit for concealed pipe replacement. Miami-Dade's guidance, for example, says if a concealed water pipe must be removed and replaced, it is new work needing a permit and inspection.
Is a slab leak covered by homeowners insurance?
Partly, often. Policies usually treat three things differently:
| Item | Often covered? | Why |
|---|---|---|
| Resulting water damage to floors, walls, cabinets | Often, if sudden and accidental | TDI: most policies cover sudden and accidental water damage |
| Tearing out and replacing the slab or floor to reach the leak (access) | Sometimes | Many forms pay to tear out and replace part of the building to reach the leak; wording varies |
| Repairing the leaking pipe itself | Often not | Wear and tear and the failed system are usually excluded |
| Foundation damage from the leak | Often not without an endorsement | TDI lists damage to foundations or slabs as a common optional endorsement |
| Damage from a slow leak over weeks or months | Often not | TDI: gradual leaks and seepage usually excluded; some forms exclude seepage over 14+ days |
The 'continuous or repeated seepage' exclusion is the main fight in slab leak claims. If you call promptly when you see the first sign and get detection done fast, you have a stronger record that the loss was sudden. TDI says you usually must report hidden water damage within days of first seeing it, and not to make permanent repairs until the insurer sees the damage.
Florida
Many Florida policies cap non-weather water damage. In 2018 Citizens' board approved a policy-form limit (not a statute) on non-weather water losses of $10,000 (including $3,000 for mitigation) for policyholders who decline its Managed Repair Program, and a June 2026 Citizens bulletin requires at least $10,000 of non-weather water coverage for a policy to count as 'comparable' in its clearinghouse. Florida claims must be noticed within 1 year of the date of loss (627.70132). See plumbing insurance and the claim process.
Can a slab leak damage my foundation?
It can. Water under a slab can soften or wash out supporting soil, and in clay soils it can make soil swell unevenly. Fixr notes slab leaks left unfixed can lead to serious water damage and problems with the foundation and landscaping. Signs of foundation movement include new cracks in drywall or tile, doors that stick, and gaps at windows. If you see those along with a known leak, have a structural engineer look before deciding on a repair, and tell your insurer. Bob Vila's foundation article puts foundation repair at $2,176 to $7,833, national average $5,001 (2024).
How long can I live with a slab leak?
Not long. A pressurized supply leak runs around the clock, raises the bill, and keeps soaking the soil and flooring. Every week adds to the risk that an insurer calls it a long-term seepage loss. If you cannot get a repair right away, a plumber can often isolate the leaking line, or you can close the main when you are away and at night. If the leak is on the hot side, closing the water heater's cold inlet stops it while leaving cold water on.
Can I sell a house with a slab leak, and do I have to disclose it?
Texas
Yes, you can sell, but you must disclose what you know. Texas Property Code 5.008 requires sellers of most single-dwelling residential property to give a written Seller's Disclosure Notice. The statutory form asks whether the seller is aware of defects or malfunctions in the foundation/slab(s) and plumbing/sewers, and whether there has been water damage not due to a flood event or previous structural repair. The notice must be completed to the best of the seller's belief and knowledge. If the seller does not deliver it before the contract, the buyer may terminate for any reason within seven days after receiving it. Some transfers, such as foreclosures and certain estate transfers, are exempt (5.008(e)).
Florida
Florida has no single statutory seller disclosure form like Texas. Florida courts have long held that a home seller must disclose known facts that materially affect the property's value and are not readily observable, a rule usually traced to the 1985 Florida Supreme Court case Johnson v. Davis. We could not load the opinion text to quote it here, so ask a Florida real estate attorney how it applies to your sale. Practically, a known slab leak, past slab leak repairs and any related insurance claim should be disclosed in writing.
Buyers: ask for repair invoices, warranties and insurance claim records. See selling a house and home buying checklist.
Do home warranties cover slab leaks?
Some do, with limits. Many home warranty contracts list slab leaks as covered only up to a dollar cap, cover only access through the slab (not rerouting), or exclude them unless you buy an add-on. They usually exclude damage the leak caused. Read the plumbing section of the contract and the exclusions before you need it. See home warranty plumbing.
Who do I hire, and how do I avoid a sales pitch?
- Hire leak detection separately from repair if you want an independent finding, or at least get the detection report in writing before agreeing to a repair method.
- Get two quotes, each with the method, footage, materials, permit, flooring and patching spelled out.
- Verify licenses: TSBPE in Texas (every plumbing company needs a Responsible Master Plumber), DBPR in Florida (CF or RF license).
- Be wary of pressure to repipe the whole house after a single first leak, and equally wary of a cheap spot repair on a line that has leaked before.
- In Florida, direct contracts over $2,500 on homes of up to four units must include the statutory construction lien warning (713.015), and contractors who take more than 10% up front must apply for permits within 30 days and start work within 90 days of permit issuance (489.126).
How to choose a provider
- Run the meter test: no water use for two hours and see if the meter moves.
- Close the water heater's cold inlet to see if the leak is on the hot side.
- Photograph warm spots, wet flooring, cracks and the meter reading.
- Report to your insurer within days of first noticing it.
- Get leak detection in writing with the method and marked location.
- Compare spot repair, reroute and repipe quotes side by side.
- Ask about permits, flooring repair and warranty on every quote.
- Keep every invoice and report for future buyers and insurers.
- Texas sellers: disclose known slab and plumbing issues on the Seller's Disclosure Notice.
Related plumbing guides
- How Do You Find a Hidden Water Leak, From a DIY Meter Test to Pro Leak Detection?
- Why Is My Water Bill So High? How Do You Find the Cause and Get a Leak Adjustment?
- How Much Does It Cost to Repipe a House, and Should You Use PEX, Copper or CPVC?
- Does Homeowners Insurance Cover Plumbing Leaks? Sudden vs Gradual Damage in Texas and Florida
- How Do You File a Water Damage Insurance Claim in Texas or Florida, Step by Step?
- Selling a House With Plumbing Problems in Texas or Florida: What Must You Disclose?
- Do Home Warranties Cover Plumbing in Texas and Florida, and What Do They Leave Out?
- What Kind of Pipes Do I Have? A Visual Guide by Home Age in Texas and Florida
Plumbing by state and city
Questions people ask
Can a slab leak fix itself?
No. A leak in a pressurized pipe under concrete only gets larger. Water may disappear into sandy soil for a while, which hides the problem, but the pipe keeps leaking and the bill keeps rising. The longer it runs, the more damage to soil, slab and flooring, and the harder it becomes to argue the loss was sudden for insurance.
Does insurance pay for leak detection?
Some policies pay leak detection as part of a covered claim, others do not. Ask your insurer before you hire, and keep the detection invoice and report either way. The report documents the cause and location, which the adjuster needs. If the claim is denied, the report still helps you choose a repair method.
How long does slab leak repair take?
Fixr says repairs can take from a few hours to a few days. A spot repair through the slab may be done in a day, plus drying and flooring work. A reroute or repipe of a whole house often takes several days, plus drywall patching. Ask the plumber to estimate how long water will be off each day.
Can I stay in the house during a slab leak repair?
Usually yes. Water may be off for part of each workday, and a direct repair creates dust and noise from cutting concrete. If the leak caused mold or major flooring removal, you may need to stay elsewhere for a short time. Ask your insurer whether additional living expense coverage applies.
Is PEX or copper better for a reroute?
Both are common. Bob Vila lists PEX materials at $0.40 to $2 per foot versus $2 to $8 for copper, and PEX is flexible, so overhead reroutes go faster. Copper has a long track record. In Texas attics, any line needs insulation against freezing. Our repipe guide compares them in detail.
Will a slab leak hurt my home's resale value?
A repaired leak with documentation usually matters far less than an unknown one. Buyers and inspectors want to see the detection report, repair invoice, permit if required, and any warranty. A home that has been rerouted or repiped can even be a selling point. Hiding a known leak can create legal risk for the seller in both Texas and Florida.
Sources
- Fixr: Slab leak repair cost (May 2025)
- Bob Vila: Slab leak repair cost (2024)
- Bob Vila: Cost to repipe a house (2023)
- TDI: Homeowners insurance guide (cb025)
- TDI: Texas homeowners policy comparison (2018)
- TDI: When are water damage and mold covered by insurance?
- Texas Property Code ch. 5 (5.008 Seller's Disclosure)
- EPA WaterSense: Fix a Leak Week
- Insurance Journal: Citizens limits non-weather water losses (2018)
- Insurance Journal: Citizens comparable-coverage bulletin (June 2026)
- Fla. Stat. 627.70132
- Miami-Dade: Permit exemptions
- Fla. Stat. ch. 713 (construction liens)
- Fla. Stat. 489.126
- TSBPE: Consumer Information
- DBPR: Construction Industry Licensing Board
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


