New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Plumbing

Why Is My Toilet Running, Leaking or Clogging, and How Do I Fix It?

A step-by-step guide to the parts inside a toilet tank, the fixes most people can do in an hour, what a plumber charges, and the Texas and Florida rules on rebates, permits and who pays in a rental.

A toilet that keeps running is almost always leaking water from the tank into the bowl through a worn flapper, or overfilling into the overflow tube because the fill valve or float is set too high. Put food coloring in the tank: if color reaches the bowl in 10 minutes without flushing, replace the flapper. If water spills into the overflow tube, lower the float or replace the fill valve. EPA says to replace flappers at least every five years.

Key facts

  • A worn toilet flapper is the most common cause of a running toilet; EPA says to check flappers and replace them at least every five years (EPA WaterSense).
  • EPA's dye test: put a few drops of food coloring in the tank; color in the bowl after 10 minutes means a leak (EPA WaterSense, Fix a Leak Week).
  • The federal toilet standard is 1.6 gallons per flush; WaterSense toilets use 1.28 gpf or less, and older toilets can use as much as 6 gpf (EPA WaterSense).
  • Toilets are nearly 30 percent of indoor home water use; replacing old toilets with WaterSense models can save about 13,000 gallons and more than $170 a year (EPA WaterSense).
  • Fixr (updated January 2026) puts toilet replacement at $250 to $800, average about $450, with labor alone $150 to $440.
  • Fixr (updated January 2025) puts a professional toilet unclog at $200 to $700, average about $350.
  • Tampa Bay Water Wise lists homeowner rebates of up to $200 for high-efficiency toilet retrofits in Hillsborough, Pasco and Pinellas counties, Tampa, St. Petersburg and New Port Richey.
  • Texas Occupations Code 1301.551 lets cities skip permits for repairing leaks and replacing ballcocks (fill valves) and water closets (toilets).
  • EPA and Miami-Dade County both say not to flush wipes; only human waste and toilet paper belong in a toilet, especially on septic.

How does a toilet work? The five parts that cause most problems

A standard gravity toilet is simple. When you push the handle, a chain lifts a rubber or silicone seal called the flapper off the flush valve opening at the bottom of the tank. Water rushes into the bowl and pushes waste down the drain. When the tank is nearly empty, the flapper drops back and seals. The fill valve (old codes and statutes call it a ballcock) then refills the tank until a float rises high enough to shut it off. A small refill tube clipped to the overflow tube sends a little water into the bowl so the bowl stays full and blocks sewer gas.

Almost every running, hissing, weak or phantom-flushing toilet comes back to one of these five parts. Under the tank, two other parts cause leaks on the floor: the wax ring (or foam gasket) that seals the toilet to the drain flange, and the supply line and shutoff valve on the wall.

PartWhat it doesSymptom when it fails
FlapperSeals the tank from the bowlRunning, phantom flushes, dye in bowl
Flapper chainConnects handle to flapperWeak flush (too long or tangled) or nonstop running (too tight)
Fill valveRefills the tankHissing, slow refill, water spilling into overflow tube
FloatShuts off the fill valveWater level too high or too low
Wax ringSeals toilet to drainWater or odor at the base, rocking toilet
Supply line and shutoffBrings water from the wallDrips behind the toilet, a valve that will not close

Why does my toilet keep running? A 10-minute diagnosis

Take the lid off the tank and set it on a towel. Then work through these checks in order.

  1. Look at the water level. If water is spilling into the top of the overflow tube, the fill valve is not shutting off in time. The fix is at the float or fill valve, not the flapper. Most tanks have a water-line mark molded inside. The water should stop about an inch below the top of the overflow tube.
  2. Do the dye test. If the water is below the overflow tube but the toilet still runs or refills on its own, put a few drops of food coloring in the tank and do not flush. EPA says that if color shows up in the bowl after 10 minutes, you have a leak. Flush afterward so the dye does not stain.
  3. Check the chain. A chain with no slack can hold the flapper open a crack. A chain that is too long can get trapped under the flapper. Aim for about a half inch of slack.
  4. Feel the flapper. Turn off the water, flush, and run a finger around the flapper and the valve seat. A flapper that feels soft, slimy, warped or stiff will not seal. Mineral crust on the seat does the same thing.
  5. Listen. A steady hiss with no visible leak often means the fill valve seal is worn.

A running toilet is not a small leak. EPA notes that a single leaky or running toilet can add as much as 200 gallons of water a day. If you are on septic, that water also goes into your tank and drain field.

Why does my toilet run for a few seconds every so often (phantom flush)?

A "phantom flush" is when the toilet refills by itself every 15 minutes or every few hours with nobody touching it. Water is slowly seeping past the flapper into the bowl. When the tank level drops far enough, the float falls and the fill valve turns on for a few seconds to top it off.

EPA says an old or worn flapper can make a toilet flush on its own or silently leak thousands of gallons a year. The dye test confirms it. The usual fixes are:

  • Replace the flapper with one sized for your flush valve. Most are 2-inch or 3-inch. EPA suggests taking the old flapper, or a photo of it, to the store and checking whether it has a foam float that also needs replacing.
  • Clean the flush valve seat with a nonscratch pad if it has scale. Hard water builds scale faster. USGS describes hard water as water carrying dissolved calcium and magnesium, and your utility's annual water quality report lists your hardness.
  • If the seat itself is pitted or cracked, replace the whole flush valve, or use a seat repair kit that glues a new seat over the old one.

One more cause: if the refill tube is pushed deep into the overflow tube below the water line, it can siphon water out of the tank. Clip it so its end sits above the top of the overflow tube.

How do I replace a toilet flapper?

  1. Turn the shutoff valve behind the toilet clockwise until it stops. If it will not close or it leaks, see the note on shutoff valves below.
  2. Flush and hold the handle down to drain the tank. Sponge out what is left.
  3. Unhook the chain from the handle arm.
  4. Slide the flapper's side ears off the pegs on the overflow tube, or slip the ring off the tube if your flapper uses a ring.
  5. Wipe the valve seat clean.
  6. Install the new flapper, hook the chain with a half inch of slack, and trim extra chain so it cannot get caught.
  7. Turn the water back on, let the tank fill, flush a few times, and repeat the dye test.

Many replacement flappers are adjustable. If your toilet is a low-flow model, set the dial to match the original flush volume. A flapper that closes late can make a 1.28 gallon toilet use more water than it should.

How do I replace or adjust a fill valve?

Adjust first. On a modern float-cup fill valve, squeeze the clip on the side rod or turn the adjustment screw to lower the cup. On an older ball-float valve, bend the float arm down slightly or turn the screw on top of the valve. Lower the level until it stops about an inch below the overflow tube.

If adjusting does not stop the running, or the valve hisses, replace it. A universal fill valve fits most two-piece toilets.

  1. Close the shutoff, flush, and sponge the tank dry.
  2. Put a towel down and disconnect the supply line under the tank.
  3. Unscrew the plastic locknut under the tank and lift out the old valve.
  4. Set the new valve's height per its instructions, usually so the critical-level mark sits at least an inch above the overflow tube. Insert it, hand-tighten the locknut plus a quarter turn, and reconnect the supply line.
  5. Clip the refill tube to the overflow tube, open the water, and check for drips under the tank.

While you are under there, look at the supply line. A cracked plastic nut or a bulging rubber line is a common source of sudden floods. Braided stainless lines are cheap. See our guide to supply line and angle stop leaks.

Why is my toilet flush weak or incomplete?

A weak flush has a short list of causes:

  • Water level too low. Raise the float so water stops near the fill line.
  • Chain too long. The flapper closes before the tank empties.
  • Clogged rim holes or siphon jet. Hard water scale blocks the small holes under the rim and the jet hole at the bottom of the bowl. A small mirror helps you see the rim holes. Clear them with a bent wire and a scale remover made for toilets.
  • A partial clog in the trap or drain. The bowl fills high, then drains slowly.
  • A blocked roof vent. If the toilet gurgles and drains slowly and other fixtures do too, the problem may be the vent or the main line. See below.

Why is water leaking around the base of my toilet?

First rule out the easy sources. Dry the floor and the toilet completely, then lay toilet paper around the base. Watch for where water appears.

  • Condensation. In humid Gulf Coast and Florida summers, a cold tank can "sweat" and drip onto the floor. The water is clear and the tank feels wet all over.
  • Supply line or shutoff valve. Drips start behind the toilet.
  • Tank-to-bowl bolts or gasket. Drips start under the tank, usually after a flush.
  • Cracked tank or bowl. Look for a hairline crack. Porcelain cannot be reliably repaired; replace the piece.
  • Failed wax ring. Water seeps from under the base only when you flush, often with a sewer odor or a toilet that rocks.

Do not ignore a base leak. Water that leaks every flush soaks the subfloor and can feed mold. Insurers often treat slow, repeated leaks differently from sudden ones. The Texas Department of Insurance says most policies cover sudden and accidental water damage, such as a toilet overflow, but usually not damage from gradual leaks or seepage. See what home insurance covers for plumbing.

How do I replace a wax ring?

This is a moderate DIY job. A toilet weighs about 60 to 120 pounds, so have help.

  1. Close the shutoff, flush, and sponge out the tank and bowl.
  2. Disconnect the supply line. Pry off the bolt caps and remove the two nuts at the base.
  3. Rock the toilet gently to break the seal and lift it straight up. Set it on old towels or cardboard.
  4. Stuff a rag in the drain opening to block sewer gas and keep tools from falling in.
  5. Scrape off the old wax. Check the flange, the ring screwed to the floor. A cracked or rusted flange, or one sitting well below the finished floor, needs a repair ring or extra-thick wax ring.
  6. Put new closet bolts in the flange, press a new wax ring (or a wax-free foam seal) onto the toilet horn or flange, remove the rag, and lower the toilet straight down onto the bolts.
  7. Press down with your body weight, tighten the nuts evenly, a little at a time on each side. Overtightening cracks porcelain.
  8. Reconnect water, flush several times, and check for leaks. Caulk the base if your local code or preference calls for it, leaving a small gap at the back so a future leak shows.

If the floor around the flange is soft or the toilet keeps rocking, the subfloor may be rotted. That is a job for a plumber and possibly a carpenter.

How do I unclog a toilet, with or without a plunger?

Stop flushing. A second flush on a clogged toilet is how bathrooms flood. If the bowl is close to the rim, lift the tank lid and push the flapper down to stop more water.

With a plunger

Use a flange plunger, the kind with a soft extension at the bottom. A flat cup plunger is for sinks. Make sure the rubber is covered with water, seal it over the drain hole, and push gently first to remove air. Then plunge firmly in and out 15 to 20 times, keeping the seal.

Without a plunger

  • Dish soap and hot water. Squirt in some dish soap, then pour in a bucket of hot tap water (not boiling, which can crack porcelain) from waist height. Wait 15 minutes. This helps with clogs of waste and paper.
  • Toilet auger. Also called a closet auger. It has a bent tube and a rubber sleeve that protects the bowl. Crank the cable into the trap, pull back, and repeat. It handles most clogs a plunger cannot.
  • A wet-dry vacuum can pull out objects such as a toy, if you can reach them.

Skip chemical drain cleaners in a toilet. Hot reactions can damage porcelain and wax seals, and if they fail you or your plumber are left working in caustic water. Miami-Dade County also warns that drain cleaners flushed into a septic system can kill the bacteria the system needs.

If an auger does not clear it, or a plunger in the toilet makes water rise in the tub, the clog is probably past the toilet. Read clogged main sewer line.

Why does my toilet clog all the time?

  • What goes in it. EPA's rule of thumb is to flush only human waste and toilet paper. Its list of never-flush items includes cooking grease, non-flushable wipes such as baby wipes, feminine hygiene products, dental floss, diapers, cat litter and paper towels.
  • Too much paper per flush in a low-flow toilet. Flush twice for heavy use.
  • A toilet that has always flushed poorly. Flush performance varies by model. EPA requires WaterSense toilets to pass independent tests for waste extraction and drain-line transport, so a certified model is a safer pick when you replace one.
  • Scale in the rim holes and siphon jet.
  • An object stuck in the trap, such as a toothbrush or toy. It catches paper over and over. The toilet may need to come off so the object can be pushed out from below.
  • A drain or sewer problem. Roots, a belly (sag) in the line, or broken pipe. If clogs keep coming back, a sewer camera inspection tells you why.

Can I flush wipes labeled flushable?

The safest answer is no. Wipes do not break apart the way toilet paper does. They wrap around roots, catch on rough joints in old cast iron and clay pipe, and jam pumps. EPA's septic guidance says not to flush anything besides human waste and toilet paper, and lists non-flushable wipes among items to never flush. Miami-Dade County's septic guidance says that everything other than toilet paper, from kitchen grease to bathroom wipes, cannot be digested by a septic system and will clog the tank and drain field.

The risk is higher in older Texas and Florida homes with cast iron or clay drains, and in homes with a sewage ejector or grinder pump. Put a small lidded trash can in each bathroom so guests have an easy choice. See septic vs sewer if you are not sure which you have.

Why does my toilet gurgle?

Gurgling means air is being pulled through the water in the bowl. Common causes:

  • A partial clog in the toilet or the branch drain.
  • A blocked vent. Every fixture needs air from a vent pipe through the roof. Leaves, bird nests or a failed air admittance valve can block it. Then draining water pulls air through the nearest toilet trap instead.
  • A main line clog. If the toilet gurgles when the washing machine drains or when you run the tub, water is backing up in the main line. Fixr lists toilet gurgling and water bubbling in the tub or shower when the dishwasher or washer runs among the signs of a clogged main sewer line.

A gurgle with slow drains in several fixtures at once is a warning to stop using water heavily and call for drain service before the lowest drain backs up.

How much does it cost to fix or replace a toilet?

These are national figures from named cost guides. Expect Texas and Florida metro prices to vary by company, time of day and access.

JobTypical costSource
Flapper, fill valve or wax ring (parts)Typically under $100 eachFixr, updated Jan. 2026
Toilet replacement, installed$250 to $800, average about $450Fixr, updated Jan. 2026
Labor only for installation$150 to $440Fixr, updated Jan. 2026
Haul away old toilet$50 to $200Fixr, updated Jan. 2026
New toilet where none existed$1,000 to $3,500Fixr, updated Jan. 2026
Professional unclog$200 to $700, average about $350Fixr, updated Jan. 2025
Toilet auger by a plumber$300 to $400 (electric) or $100 to $250 (hand)Fixr, updated Jan. 2025
Pull the toilet to clear a clog$200 to $550Fixr, updated Jan. 2025
Emergency unclog visit$400 to $700Fixr, updated Jan. 2025

Fixr lists plumber rates of $75 to $150 an hour for toilet work. Ask whether there is a trip or service charge and whether it is credited to the repair.

Repair or replace?

Repair if the china is sound and the toilet is a 1.6 gpf or newer model. Replace if the tank or bowl is cracked, if parts are no longer made, if it clogs often even after the drain is cleared, or if it is a pre-1990s toilet using 3.5 gallons or more per flush. EPA says older toilets can use as much as 6 gallons per flush.

What is a WaterSense toilet, and how many gallons per flush should a toilet use?

The current federal standard for new toilets is 1.6 gallons per flush (gpf). EPA's WaterSense label goes further: certified toilets use 1.28 gpf or less, which is 20 percent less than the federal standard, and must pass independent tests for flushing performance, bowl cleaning, waste extraction and carrying waste down the drain line.

The savings are real. EPA says toilets are nearly 30 percent of a home's indoor water use. Replacing old toilets with WaterSense models can cut toilet water use by 20 to 60 percent, about 13,000 gallons a year for an average home, worth more than $170 a year and $3,400 over the toilets' lifetime.

Toilet typeGallons per flush
Older toilets (pre-1990s)3.5 to as much as 6
Federal maximum for new toilets1.6
WaterSense labeled1.28 or less
Dual-flush WaterSenseReduced flush for liquid waste

Is it worth it? If your toilet uses 3.5 gallons or more per flush, EPA's figure of more than $170 a year in savings for an average home means a mid-priced WaterSense toilet can pay for itself in a few years, faster with a rebate. If your bill includes a sewer charge based on water use, every gallon saved counts twice. A 1.6 gpf toilet in good shape saves less by switching, so repair it unless it performs poorly. EPA notes that it has paused a planned Version 2.0 of its toilet specification, so the 1.28 gpf label rules still apply.

Are there toilet rebates in Texas and Florida?

Rebates change often and depend on your water utility, not your city name. Check before you buy, because most programs require pre-approval, a receipt and the old toilet's removal.

  • Tampa Bay area. The regional Tampa Bay Water Wise program lists rebates of up to $200 for homeowners doing high-efficiency toilet retrofits, up to $75 per tank-type toilet for businesses, and $40 to $40,000 for multifamily projects. It covers Hillsborough County, Pasco County, Pinellas County, the City of Tampa, St. Petersburg and New Port Richey.
  • Austin. Austin Water's current Rebates, Tools and Programs page, checked November 2026, lists free 1.5 gpm showerheads and faucet aerators and irrigation rebates, but no toilet rebate. Check its Conservation Hub before buying, since offerings change.
  • Other cities. We could not confirm current toilet rebates for San Antonio (SAWS), Houston, Dallas, Miami-Dade, Orlando or Jacksonville when this guide was updated. Search your utility's conservation page or call the number on your water bill. EPA notes that some utilities offer rebates or vouchers for WaterSense toilets.

Do I need a permit or a licensed plumber to replace a toilet?

Texas. Texas Occupations Code 1301.551 requires cities over 5,000 people to regulate plumbing and require permits, but it lists exceptions that include repairing leaks and replacing ballcocks (fill valves) and water closets (toilets). Homeowners may also do their own plumbing work on their homestead in many Texas cities. Houston's local amendments, for example, allow an owner to work on an owner-occupied homestead but do not exempt the owner from permits where one is required.

Florida. Rules are local. Jacksonville says replacing plumbing fixtures after the stop valve is exempt from permits. Miami-Dade's permit exemption list lets licensed plumbing contractors repair or replace toilets without a permit. Moving a toilet or adding a new one is new work that needs a permit nearly everywhere.

Renters should not replace a toilet without the landlord's written OK. See plumbing permits and DIY rules.

Renters: who pays to fix a running or clogged toilet?

Texas. Under Texas Property Code 92.052, a landlord must make a diligent effort to repair a condition that materially affects the health or safety of an ordinary tenant after the tenant gives notice and is current on rent. A home with no working toilet usually qualifies; a slowly running toilet may not. The landlord does not have to repair conditions caused by the tenant, a family member or a guest, unless the cause is normal wear and tear. A worn flapper is wear and tear. A toy flushed by a child is not. Section 92.056 presumes seven days is a reasonable time to repair.

Florida. Florida Statute 83.51 requires landlords to keep plumbing in reasonable working condition where no local code applies, and for apartments and other units that are not single-family homes or duplexes, to provide running water and functioning facilities. Section 83.51(4) says the landlord is not responsible for conditions caused by the negligent or wrongful act of the tenant, family or guests.

Either way, report problems in writing, keep a copy and take photos. See Texas landlord repairs and Florida landlord repairs.

When should I call a plumber instead?

  • The shutoff valve will not close or leaks when you turn it.
  • Water comes up in a tub or shower when you flush or plunge.
  • Sewage odor stays after a new wax ring, or the floor near the toilet is soft.
  • The flange is broken, or the toilet sits on a cast iron flange you cannot get a new bolt into.
  • The toilet clogs again within days of clearing it.
  • You live in a condo and the leak may reach the unit below. Stop the water and call management. See condo plumbing responsibility.

Licensing rules: in Texas, check a plumber's license with the Texas State Board of Plumbing Examiners; in Florida, look up a certified or registered plumbing contractor with DBPR. See how to hire a plumber.

How to choose a provider

  • Do the EPA dye test on every toilet twice a year.
  • Replace flappers at least every five years, or sooner in hard water.
  • Set the water level about an inch below the top of the overflow tube.
  • Leave about a half inch of slack in the flapper chain.
  • Turn each toilet shutoff valve once a year so it does not seize.
  • Replace cracked or bulging toilet supply lines with braided stainless.
  • Put a lidded trash can in every bathroom for wipes and hygiene products.
  • Keep a flange plunger and a closet auger in the house.
  • Check your water utility's rebate page before buying a new toilet.
  • Look for the WaterSense label (1.28 gpf or less) when replacing a toilet.

Related plumbing guides

Plumbing by state and city

Questions people ask

How long do toilet flappers last?

EPA says to check flappers periodically and replace them at least every five years. In hard water or where chlorine levels are high, rubber can harden or warp sooner. If the dye test shows color in the bowl, or the toilet refills by itself, replace the flapper even if it is newer. Buy one sized for your flush valve, usually 2 or 3 inches, and bring the old one to the store so you get an exact match.

Is a running toilet an emergency?

Usually not, but do not leave it. EPA says a running toilet can add up to 200 gallons a day, which shows up on your water and sewer bill and can overload a septic system. Turn the shutoff behind the toilet clockwise until you can fix it, and open it only to flush. It becomes urgent if water is overflowing the bowl or leaking onto the floor.

Why does my toilet tank fill slowly?

Slow refills usually come from a clogged or worn fill valve, debris in the supply line, or a shutoff valve that is only partly open. Turn the shutoff fully open counterclockwise. If it is still slow, close the water, remove the fill valve cap per its instructions, and flush out grit by briefly opening the supply into a cup. If that fails, replace the fill valve, which is inexpensive.

Can I put a brick in my toilet tank to save water?

It is not a good idea. A brick can crumble and grit can damage the flapper and valve seat, and lowering the flush volume on a toilet designed for it can cause double flushing and clogs. If you want to use less water, replacing an old toilet with a WaterSense model that uses 1.28 gallons or less per flush saves water without hurting flush performance.

What does it mean if my toilet water level drops on its own?

If the level slowly drops and the toilet refills, water is leaking past the flapper. If the bowl level drops and stays low, the cause may be a crack in the bowl, a partial clog, an object in the trap wicking water, or negative pressure from a blocked vent or main line. Watch whether other drains gurgle at the same time.

Does homeowners insurance cover a toilet overflow?

The Texas Department of Insurance says most homeowner and renters policies cover sudden and accidental water damage such as a toilet overflow, but usually not damage from gradual leaks or seepage. Policies do not pay to fix the toilet itself. Stop the water, photograph everything and report the loss quickly. Florida claims must be reported within one year of the date of loss under Florida Statute 627.70132.

How do I fix a toilet that rocks?

A slight rock can be fixed with plastic toilet shims under the base, then snugging the floor bolts. Do not keep tightening the bolts to stop a rock, because porcelain cracks. If the toilet has rocked for a while, the wax seal may already be broken, and you should replace it. Soft flooring around the base means water damage that needs a closer look.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration