Local Guide · Plumbing
Is My Pool Leaking? Pool Plumbing Leaks, Costs and Licensing in Texas and Florida
How to tell evaporation from a leak, run a bucket and dye test, what leak detection and repair cost, whether insurance pays, and who is licensed to fix pool plumbing in Texas and Florida.
Do a bucket test: set a bucket of pool water on a step, mark both water levels, and compare after 24 hours. If the pool drops more than the bucket, it is leaking. Check the equipment pad, then use dye at fittings. Buried line leaks need a pressure test. Bob Vila's 2023 data puts detection and simple repair at $100 to $500. In Florida, CILB-licensed pool contractors repair pool piping; in Texas, plumbers handle fill and gas lines.
Key facts
- Losing more than about half an inch of water a day likely signals a leak (Bob Vila, 2024).
- Pool leak detection and simple repair: $100 to $500; hourly detection $75 to $125 (Bob Vila citing Angi, Aug. 2023).
- Pipe, main drain and pump leak repairs: $500 to $1,500 each; skimmer leaks $100 to $250 (Bob Vila, Aug. 2023).
- Florida licenses commercial pool/spa, residential pool/spa and pool/spa servicing contractors (Fla. Stat. 489.105).
- Florida pool contractor scopes exclude direct connections to sanitary sewer or potable water lines; those are plumbing.
- Texas irrigation rules bar using an irrigation system to fill a swimming pool (30 TAC 344.62(n)).
- TDI: most policies cover sudden water damage but not gradual leaks or seepage; some exclude seepage lasting 14 days or more.
- Florida property claims must be reported within one year of the date of loss (Fla. Stat. 627.70132).
How do I know if my pool is leaking?
Every pool loses some water to evaporation, splashing and backwashing the filter. In Texas and Florida summers, with hot sun, wind and low humidity on some days, that loss can look alarming. The question is whether you are losing more than evaporation explains.
Bob Vila's 2024 pool leak guide offers a useful rule of thumb: if the pool seems to lose more than half an inch of water a day, a leak is likely. Other warning signs:
- You add water more than once a week, or the auto-fill runs constantly.
- Soggy grass, mushy soil or standing water near the pool, the equipment pad or along a buried pipe route.
- Cracks or loose tiles in the bond beam, deck or shell, or a deck that is settling or separating from the coping.
- Chemicals that will not stay balanced, because fresh water keeps diluting them.
- Algae that keeps coming back for the same reason.
- Air bubbles in the return jets, or the pump losing prime, which can point to a suction-side leak that pulls air in.
- A water bill that keeps climbing. See our high water bill guide for how to read your meter.
One more clue: watch where the water level stops. If the pool drops to the bottom of the skimmer opening and stays there, the skimmer or its line is the likely culprit. If it drops to a light and stops, look at the light niche. If it keeps falling below every fitting, the shell or main drain line is more likely.
What is the bucket test, and how do I do it right?
The bucket test compares water loss in the pool to water loss in a bucket sitting in the same sun and wind. Both lose water to evaporation, so if the pool drops noticeably more than the bucket, the extra loss is a leak.
- Bring the pool to its normal level. Turn off the auto-fill if you have one.
- Fill a 5-gallon bucket with pool water to within a few inches of the top and set it on the first or second pool step so the water temperature matches the pool. Weigh it down if needed.
- Mark the water level inside the bucket with tape or a marker, and mark the pool level on the tile or skimmer.
- Run the pump on its normal schedule for 24 hours and do not swim, backwash or add water.
- Compare the drops. If the pool level fell more than the bucket level, you likely have a leak.
- Repeat with the pump off. If the pool loses more with the pump running, the leak is probably on the pressure (return) side. If it loses more with the pump off, suspect the suction side or the shell.
Bob Vila's guide suggests leaving the bucket for a day or two before measuring. Rain or heavy wind during the test can throw it off, so run it on a calm, dry day if you can.
The dye test, the equipment pad and other DIY checks
Check the equipment pad first
The equipment pad (pump, filter, heater, valves and the pipes between them) is where many leaks start, and it is the easiest place to look. Look for drips at pipe unions, the pump lid O-ring, the pump shaft seal (water dripping from under the motor), filter tank clamps and valve stems. Bob Vila's guide warns that water may not be visible immediately, so check the pad over a few days, and never touch wet electrical parts.
Do a dye test
Once evaporation is ruled out, a dye test can show the exact spot. Turn the pump off so the water is still. Swim slowly to a suspected crack, light, skimmer throat, return fitting or main drain and squeeze a small amount of leak-detection dye or food coloring next to it. If there is a leak, the dye gets pulled into the crack or gap. Goggles and a snorkel help.
When DIY stops working
If the bucket test says you are leaking but you cannot find it at the pad or with dye, the leak is probably underground in the plumbing. That is where professional leak detection earns its fee.
How professionals find pool plumbing leaks
A pool leak specialist usually works through three methods, cheapest and fastest first.
| Method | What it finds | How it works |
|---|---|---|
| Visual and dye inspection | Shell cracks, fittings, lights, skimmers, main drain covers | A diver or technician checks every penetration in the pool with dye |
| Pressure test of the lines | Leaks in buried suction, return, main drain, skimmer and cleaner lines | Each line is plugged at both ends and pressurized with air or water; a dropping gauge means that line leaks |
| Electronic listening (acoustic) equipment | The exact spot on a line that failed a pressure test | Ultrasound or listening gear picks up the sound of escaping water or air through the deck or soil |
The pressure test is the step that answers "is it the plumbing?" Pools typically have several separate lines: one or more from the skimmers, one from the main drain, several returns, and sometimes a cleaner or spa line. Testing them one at a time narrows the repair to a single pipe and often a single spot, so the crew breaks out a small section of deck instead of the whole patio.
Bob Vila's August 2023 cost guide, citing Angi data, lists leak detection and repair at $100 to $500 depending on the leak's location and cause, with hourly leak detection running $75 to $125. A general pool inspection costs $150 to $300 in Fixr's January 2025 data.
How much does pool leak detection and repair cost?
These figures come from national cost guides, not Texas or Florida studies. Use them to sanity-check quotes, and expect local prices to vary.
| Item | Reported range | Source and date |
|---|---|---|
| Pool leak repair, overall | $10 (DIY patch) to $3,500 | Bob Vila citing Angi, Aug. 2023 |
| Leak detection (and simple repair) | $100 to $500 | Bob Vila citing Angi, Aug. 2023 |
| Hourly leak detection | $75 to $125 per hour | Bob Vila, Aug. 2023 |
| Pool repair labor | $45 to $65 per hour | Bob Vila, Aug. 2023 |
| Pool light leak | $75 to $300 | Bob Vila, Aug. 2023 |
| Skimmer leak | $100 to $250 | Bob Vila, Aug. 2023 |
| Liner leak | $100 to $2,750 | Bob Vila, Aug. 2023 |
| Pipe leak (including return lines) | $500 to $1,500 | Bob Vila, Aug. 2023 |
| Main drain line | $500 to $1,500 | Bob Vila, Aug. 2023 |
| Pump leak | $500 to $1,500 | Bob Vila, Aug. 2023 |
| Draining the pool | $180 to $230 | Bob Vila, Aug. 2023 |
| Refilling water | About $55 per 5,000 gallons | Bob Vila, Aug. 2023 |
| Rebalancing chemicals after refill | About $450 | Bob Vila, Aug. 2023 |
| Pool inspection | $150 to $300 | Fixr, Jan. 2025 |
How much does it cost to repair a pool return line?
A return line leak falls in the "pipes" row: about $500 to $1,500 in Bob Vila's data. The low end is a leak near the equipment pad or a fitting the crew can reach easily. The high end is a leak under a concrete or paver deck that has to be cut, repaired and patched, and the patch rarely matches the old deck exactly. Ask whether the quote includes deck restoration, and whether the crew will pressure test the line again after the repair.
Concrete (gunite) pools usually cost the most to repair because the work is labor-heavy; vinyl liner repairs tend to be at the low end, according to Bob Vila's guide.
Why is my pool losing water fast?
Fast loss, an inch or more a day, usually has a short list of causes:
- A broken pipe or fitting under the deck, often a return line, especially after ground movement, root intrusion or a freeze.
- A failed main drain fitting or line.
- The backwash or waste valve left open or leaking, sending water down the drain or into the yard. Check this first; it is free.
- A leaking pump shaft seal or a cracked pump housing at the equipment pad.
- A stuck auto-fill valve that overfills the pool, which sends water out the overflow and shows up on the water bill even though the level looks fine.
- Splash-out and heavy use, which is not a leak, but adds up at parties.
Because buried pipe leaks can wash soil away, act quickly. Bob Vila's guide notes that an ignored pool leak can lead to sinkholes, more pool damage and foundation shifts.
Can a pool leak cause a slab or foundation problem?
It can. A pool leak puts a steady supply of water into the soil near the pool and, often, near the house. That water can wash out fill under the deck, cause settling and cracking, and wet the soil under the home's slab. Bob Vila's leak guide lists sinkholes and foundation shifts among the consequences of an ignored pool leak.
If you see new cracks in the house slab, sticking doors, or a wet area that tracks from the pool toward the house, stop adding water, get leak detection done and, if the house shows signs of movement, have the foundation evaluated. Also rule out a leak in the house plumbing itself; our slab leak guide explains how to tell the difference.
In Texas, a seller's disclosure asks about known defects in the foundation or slab, and in a pool, spa or hot tub, and specifically whether there is a single blockable main drain (a drain a person's body could block to create a dangerous suction entrapment). Fixing a known pool leak before you list avoids hard questions later. See our selling guide.
Does homeowners insurance cover pool plumbing leaks?
Often the leak repair itself is not covered, and the answer depends on your policy wording. General principles from the Texas Department of Insurance (TDI):
- Most homeowners policies cover sudden and accidental water damage, such as a burst pipe, but usually not damage from gradual leaks or seepage.
- TDI's policy comparison lists common exclusions including water damage from continuous and repeated leakage or seepage, and some Texas forms exclude seepage from plumbing, HVAC, sprinkler systems or appliances that lasted 14 days or more.
- Damage to foundations or slabs from plumbing leaks is often an optional endorsement, not standard coverage, according to TDI.
An underground pool line leak usually develops over days or weeks, which is why claims for the leak repair are often denied. If the leak causes a sudden collapse, a sinkhole or damage to the house, coverage may be different. Read your policy's section on other structures, water damage and earth movement, and ask your agent in writing.
Florida deadlines matter
If you do file in Florida, Florida Statutes 627.70132 bars a new or reopened property claim unless the insurer gets notice within one year of the date of loss, and a supplemental claim within 18 months. Report water damage promptly and document it with photos and your leak detection report. Our plumbing insurance guide and water damage claim guide go deeper. This is general information, not legal advice; for a disputed claim, contact the Florida Department of Financial Services, TDI, an attorney or a licensed public adjuster.
Who is licensed to repair pool plumbing in Florida?
Florida licenses pool contractors through the Construction Industry Licensing Board (CILB), part of the Department of Business and Professional Regulation (DBPR). Florida Statutes 489.105 defines three pool licenses:
| License | Scope (summarized from 489.105) |
|---|---|
| Commercial pool/spa contractor | Construction, repair and servicing of any pool, spa or hot tub, public or private, including equipment, perimeter and filter piping, package heaters and equipment rooms |
| Residential pool/spa contractor | The same scope for residential pools, spas and hot tubs |
| Swimming pool/spa servicing contractor | Repair and servicing, including replacing equipment, repairing or replacing perimeter and filter piping, adding heaters, and draining a pool for repair |
One line in the statute matters for plumbing: for all three pool licenses, the scope "does not include direct connections to a sanitary sewer system or to potable water lines." So the pool contractor can repair the pool's own circulation piping, but connecting a fill line to the house water supply, or connecting a backwash line to the sewer, is plumbing work. A Florida plumbing contractor's scope expressly includes swimming pool piping. Verify any license with the DBPR search at myfloridalicense.com, and remember that unlicensed contracting is a first-degree misdemeanor in Florida, and a felony during a declared state of emergency (Fla. Stat. 489.127).
Routine cleaning and chemical treatment that does not involve installing or replacing equipment does not require a license under 489.105.
Is there a state pool contractor license in Texas?
We could not confirm any Texas statewide license for pool builders or pool repair contractors comparable to Florida's CILB pool licenses. That means pool companies in Houston, Dallas, San Antonio and Austin may not hold a pool-specific state license. Some parts of the job are licensed, though:
- Plumbing connected to drinking water or gas, such as a fill line, a gas line to a pool heater, or a connection to the sewer, is plumbing under the Texas State Board of Plumbing Examiners (TSBPE). Anyone who offers plumbing must secure a Responsible Master Plumber (Occupations Code 1301.351).
- Cities may require permits for new pools and some equipment work. Ask your city's development services department.
- Irrigation systems may not be used to fill pools. Texas irrigation rules treat water in irrigation piping as non-potable and bar connecting domestic uses such as filling swimming pools (30 TAC 344.62(n)).
Because there is no state pool license we could find, check reviews, ask for proof of insurance, get a written scope and warranty, and verify the TSBPE license of whoever does the plumbing connections. TSBPE's public license search and complaint form are linked from its website. See our hiring guide.
Do pool leaks raise my water bill, and can I get a sewer credit for filling my pool?
Yes, a leak raises your bill twice in many cities: once for the water, and again for wastewater if your sewer charge is based on water use. A pool losing an inch a day can add up quickly, depending on surface area.
Whether you can get a credit depends on your utility. Some ways utilities handle it:
- Leak adjustments after you prove a leak was repaired, usually with an invoice from the repair company.
- Sewer charges based on winter averages, which limits how much summer pool filling affects the sewer bill.
- Separate irrigation or outdoor meters, where water used outside is not charged for sewer.
- One-time pool fill requests in some cities. Ask before you fill, not after.
Policies vary and we have not verified each Texas and Florida city's rules, so call your utility's billing office and ask specifically: "Do you offer a sewer adjustment for filling a pool or for a repaired leak, and what proof do you need?" Keep your leak detection and repair invoices. In San Antonio, SAWS applies a drought surcharge in Stage 3 on single-family use above 20,000 gallons a month, which a leaking pool can push you into.
Backflow, auto-fills and keeping pool water out of your drinking water
A pool is a classic cross-connection risk. TCEQ lists a hose left in a pool among the common ways contaminated water gets pulled back into home plumbing. Practical steps:
- Never leave a hose submerged in the pool while filling. Keep the end above the water, or use a hose bibb vacuum breaker on the faucet.
- If you have an automatic fill valve, it should have the backflow protection your local plumbing code requires. Ask the installer what device protects the house supply.
- Do not fill the pool from the irrigation system in Texas; state rules prohibit it.
- In Florida, the state's cross-connection rule excludes a swimming pool, hot tub or spa recirculation system from the definition of an "auxiliary water system," but your utility may still evaluate pool fill connections under its own program.
See our backflow testing guide for device types and testing rules.
Freezes, storms and spa plumbing
The Red Cross lists swimming pool supply lines among the pipes at highest risk of freezing. In a Texas freeze like February 2021, exposed equipment pad piping, pump housings, filter tanks and heaters can crack. Follow your equipment manufacturer's freeze instructions, which may call for running the pump or draining equipment, and check the pad for cracks before restarting after a freeze. Spa and hot tub plumbing has the same risks in a smaller, more tightly packed space; look under the cabinet for wet foam insulation, which often hides a slow leak.
After a hurricane or flood, debris and floodwater can damage pumps and contaminate pool water. Do not run electrical equipment that was submerged until it has been checked. Our hurricane and flood plumbing guide covers storm prep.
How to choose a provider
- Check that the backwash or waste valve is fully closed.
- Turn off the auto-fill and run a 24-hour bucket test.
- Repeat the test with the pump off to narrow suction vs return side.
- Inspect the equipment pad daily for a few days for drips.
- Dye-test lights, skimmers, returns, steps and visible cracks.
- Note where the water level stops dropping.
- Get professional leak detection with a written report for each line.
- Ask if deck restoration and a post-repair pressure test are included.
- Keep invoices for a utility leak adjustment and for future buyers.
- Verify the contractor's license (DBPR in Florida; TSBPE for Texas plumbing connections).
- Read your policy's water damage and other-structures sections before filing a claim.
Related plumbing guides
- Why Is My Water Bill So High? How Do You Find the Cause and Get a Leak Adjustment?
- How Do You Find a Hidden Water Leak, From a DIY Meter Test to Pro Leak Detection?
- Slab Leaks in Texas and Florida: What Are the Signs, Fixes, Costs and Insurance Rules?
- Do You Need Annual Backflow Testing in Texas or Florida? Rules, Costs and Who Can Test
- Does Homeowners Insurance Cover Plumbing Leaks? Sudden vs Gradual Damage in Texas and Florida
- Why Is My Outdoor Faucet or Sprinkler System Leaking? Texas and Florida Homeowner Guide
- Selling a House With Plumbing Problems in Texas or Florida: What Must You Disclose?
- How Do I Protect My Plumbing Before, During and After a Hurricane or Flood?
Plumbing by state and city
Questions people ask
How much water loss is normal for a pool?
It varies with sun, wind, humidity and water temperature, so there is no single number for Texas or Florida. A bucket test is the best way to know. As a rule of thumb, Bob Vila's leak guide says losing more than half an inch a day likely means a leak. If the pool drops faster than a bucket of pool water beside it, assume a leak and investigate.
How much does pool leak detection cost?
Bob Vila's August 2023 guide, citing Angi data, puts leak detection and simple repair at $100 to $500, with hourly leak detection at $75 to $125. Complex jobs that require pressure testing several buried lines and acoustic location cost more. Ask whether the price includes a written report showing each line tested and the leak locations found.
Will my homeowners insurance pay for a pool leak?
Usually not for the leak repair itself if the leak developed gradually, because most policies exclude continuous or repeated seepage, according to the Texas Department of Insurance. Sudden damage to the house from a burst line may be treated differently. Read your policy and ask your agent in writing before you file, and in Florida report any claim within one year of the date of loss.
Can I fix a pool leak myself?
Small leaks in a vinyl liner, at a light gasket or around a skimmer can sometimes be patched with a pool repair kit. Bob Vila lists DIY patching at as little as $10 to $40 in materials. Leaks in buried pipes, the main drain or the shell of a concrete pool need professional detection and repair. Turn off power before working near lights or equipment.
Is a pool leak a plumbing problem or a pool contractor problem?
Usually a pool contractor or leak detection company handles the pool's own circulation piping, equipment and shell. In Florida, pool contractors may repair perimeter and filter piping but may not make direct connections to potable water lines or the sanitary sewer; those require a licensed plumbing contractor. In Texas, fill lines and gas lines to heaters are plumbing under TSBPE.
How long does a pool pressure test take?
It depends on how many lines the pool has and whether a leak shows up early. Each line is plugged and pressurized separately, then watched on a gauge. Clear water and an accessible equipment pad make the job faster. Ask for the results of every line tested, not just the one that failed, so you know the rest of the system is tight.
Does a pool leak affect selling my house?
It can. In Texas, the seller's disclosure asks about known defects in the pool, spa and equipment, foundation problems and a single blockable main drain. In Florida, sellers must disclose known facts that materially affect value and are not readily observable, under Johnson v. Davis. Repairing the leak and keeping the invoices is usually simpler than disclosing an unresolved one.
Why does my pool pump lose prime or blow bubbles?
Air in the returns or a pump that loses prime usually means air is getting into the suction side: a loose pump lid, a worn lid O-ring, a cracked fitting or a leak in a suction line. Because suction-side leaks pull air in rather than push water out, you may not see wet ground. A low water level below the skimmer can also cause it.
Sources
- Bob Vila: How to find a leak in a pool (updated June 14, 2024)
- Bob Vila: Pool leak repair cost (Aug. 17, 2023, citing Angi)
- Fixr: Home inspection cost, specialty inspections (updated Jan. 31, 2025)
- Fla. Stat. 489.105 (pool/spa and plumbing contractor definitions)
- Fla. Stat. 489.127 (unlicensed contracting penalties)
- DBPR Construction Industry Licensing Board
- Texas Occupations Code ch. 1301 (plumbing)
- TSBPE: File a complaint and license search
- TCEQ RG-470 (Feb. 2021): 30 TAC ch. 344 irrigation rules
- TCEQ: Cross-Connection Control and Backflow Prevention
- Fla. Admin. Code 62-555.360 (Cornell LII text)
- TDI: When are water damage and mold covered by insurance?
- TDI: Texas homeowners policy comparison
- TDI: Homeowners insurance guide (cb025)
- Fla. Stat. 627.70132 (notice of property claims)
- Tex. Prop. Code 5.008 (seller's disclosure)
- San Antonio Water System: Drought restrictions
- American Red Cross: Frozen pipes
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


