Local Guide · Home EV charger installation
Who Can Legally Install an EV Charger in Florida? Chapter 489 Licenses and How to Verify One
Florida law requires a licensed electrical contractor for most EV charger installs. Here is what the statutes say, how to check a license, and what happens when someone works without one.
In Florida, wiring a Level 2 EV charger is electrical contracting under Chapter 489, Part II. It must be done by a state certified or locally registered electrical contractor, or by the homeowner under a narrow owner exemption for a single-family or duplex home they live in. A handyman without that license cannot lawfully take the job. Verify any license on MyFloridaLicense.com before signing.
Key facts
- Fla. Stat. 489.505 defines an electrical contractor as a person who installs, repairs, alters or adds to electrical wiring, fixtures, appliances, apparatus or raceways. Bidding or offering to do that work is also "contracting" under 489.505(9).
- A certified electrical contractor holds a statewide certificate of competency. A registered electrical contractor may contract only in the jurisdictions where the registration was issued (489.505).
- The owner exemption in 489.503(6)(a) covers a single-family or duplex home the owner lives in and does not sell or lease. The owner must apply for the permit, supervise and do the work, and personally sign the permit application.
- Working without a required license is a first-degree misdemeanor under 489.127(2)(a). A repeat offense, or an offense during a declared state of emergency, is a third-degree felony.
- Under 489.128, a contract signed by an unlicensed contractor is unenforceable by that contractor, and the contractor has no lien or bond claim for the work.
- A business tax receipt is not a contractor license. A license that is inactive or suspended counts as no license (489.127(1)).
- Florida Statutes 553.79(1)(g) lets owners skip a building permit for work under $7,500, but that exemption does not cover electrical work on a single-family home.
- In a condominium, 718.113(8)(h) lets the association require that the owner use a licensed and registered firm familiar with EV charging station installation.
Do you need a licensed electrical contractor for an EV charger in Florida?
Yes, in almost every case. A Level 2 home charger runs on a 240-volt circuit. Installing that circuit means running new wire, adding a breaker to your panel, and either mounting a hardwired charger or installing a heavy-duty outlet. That is electrical work, and Florida regulates it under Chapter 489, Part II of the Florida Statutes.
The key definition is in section 489.505. An "electrical contractor" is a person who has the experience and skill to "install, repair, alter, add to, or design" electrical wiring, fixtures, appliances, apparatus or raceways. A charger circuit fits that description. The same section says "contracting" includes performing electrical work for pay, and it also includes the attempted sale, the bid and the negotiation of that work. So the license rule applies the moment someone offers to do the job, not only when they start work.
The U.S. Department of Energy gives the same advice from the consumer side. Its Alternative Fuels Data Center recommends buying safety-certified charging equipment and using a certified electrical contractor.
There are three lawful paths in Florida:
- A certified electrical contractor. This person holds a state certificate and may work anywhere in Florida.
- A registered electrical contractor. This person holds a state registration tied to specific cities or counties and may work only there.
- The owner, under a narrow exemption. This applies only to certain homes and comes with duties. It is covered below.
Anyone else who takes the job, including a general handyman, a friend who "does a little electrical," or a company that is licensed in another trade only, is working outside the law unless a specific exemption applies. This guide gives general information, not legal advice. If you have a dispute, call the Florida Department of Business and Professional Regulation (DBPR) or a Florida attorney.
For the Texas rules, which work differently, see who can install an EV charger in Texas.
What is the difference between a certified and a registered electrical contractor?
Both are real licenses, and both are legal for a home charger job. The difference is where the holder may work.
| Type | Who issues it | Where the holder may work | Source |
|---|---|---|---|
| --- | --- | --- | --- |
| Certified electrical contractor | State of Florida (DBPR), after a competency exam | Anywhere in Florida | 489.505(4), (8) |
| Registered electrical contractor | State registration, based on meeting local competency rules | Only in the cities or counties named in the registration | 489.505(16) |
The statute says a certificate is a "geographically unlimited certificate of competency issued by the department." A registered contractor "may contract only in the jurisdiction for which his or her registration is issued." Section 489.117 adds that registration lets the holder work only in the counties, municipalities or districts where he or she met all local licensing requirements, and only for the type of work the registration covers.
Here is what that means in practice. A contractor with a registration issued for Hillsborough County should not be quoting your charger job in Orange County. If your contractor is registered, ask which jurisdictions appear on the registration and make sure your address is in one of them.
License categories you may see on the DBPR page
The DBPR Electrical Contractors page lists the license types. These are the ones most likely to matter for a home charger:
- EC, Electrical Contractor. Unlimited scope. Certified.
- ER, Registered Electrical Contractor. Unlimited scope, but only in the jurisdictions on the registration. DBPR notes that a registered electrical contractor may not contract for alarm systems.
- ES, Specialty Contractor, and ET, Registered Specialty Contractor. These are limited to a segment of the trade. The DBPR page lists examples such as residential electrical contracting (class code 043), low voltage systems, and maintenance of electrical fixtures. A specialty license limited to, for example, signs or low-voltage work would not cover a 240-volt charger circuit. If your contractor holds a specialty license, ask which class code applies and whether it covers installing a branch circuit for a vehicle charger.
One correction worth knowing: some summaries say "EY and EZ" are the current electrical license prefixes. On the DBPR page, EY and EZ are the letters used for registered alarm system contractors, not for electrical contractors. Do not treat an "EY" or "EZ" number as proof the person can wire a charger. Read the license type and scope on the lookup record.
How do you verify a Florida electrical contractor license?
Use the state's own lookup, not a business card or a website badge. The DBPR page states that Florida's license lookup is on MyFloridaLicense.com. Follow these steps before you sign anything.
- Ask the contractor for the license number and the exact name on the license (individual and business).
- Go to MyFloridaLicense.com and search by license number or name. Select the Electrical Contractors profession.
- Confirm the license type (certified or registered, and not a specialty or alarm license that does not fit the job).
- Confirm the status. The statute is clear that a license on "inactive or suspended" status is treated as unlicensed (489.127(1)).
- For a registered contractor, confirm your city or county is in the registered jurisdiction.
- Check for discipline and complaints on the record. The Electrical Contractors' Licensing Board reviews disciplinary cases, and the results are public record.
- Match the name on the license to the name on your contract, your permit application and the company's insurance certificate.
- Check that the business is the entity that holds the license. Under the statutes a business organization is unlicensed if it lacks a qualifying agent for the scope of work (489.128(1)(a)).
Also check your local building department. Many Florida cities and counties verify the contractor's license when you pull the permit. That is a second check, not a substitute for your own.
A business tax receipt (the old "occupational license" for operating a business in a city or county) does not prove anything. Section 489.127(1) says it "is not a license for purposes of this part." Some scammers show a local business tax receipt as if it were a contractor license.
Can a handyman install an EV charger in Florida?
Not unless the handyman also holds the right electrical license or works as a direct employee of a licensed contractor. This is one of the most common ways homeowners get into trouble.
Three parts of the statute apply:
- Offering counts. The definition of "contracting" in 489.505(9) includes the bid, the negotiation and the attempted sale. A handyman who quotes you a price for a charger circuit has already crossed the line.
- Advertising counts. Section 489.127(1)(f) bars anyone from acting as a contractor, or advertising as available to act as one, without being duly registered or certified.
- Employees have limits. Section 489.503(1) exempts employees of a licensee only when they work within the scope of that license, with the licensee's knowledge, and under the licensee's supervision and control. If the employer is not licensed for this type of work, the employee is not exempt. The statute also says an employee loses the exemption by holding out as licensed or by leading the consumer to believe he or she has an ownership or management interest.
The statute treats the unlicensed business and its employees as equally responsible. The stated intent is "to place equal responsibility on the unlicensed business and its employees for the protection of the consumers."
Some handyman jobs are legal. Plugging in a portable Level 1 cord set into an existing, properly wired outlet is not installation work. Section 489.503(5) also exempts the sale or installation of finished products that do not become a permanent fixed part of the structure. But a wall-mounted charger wired to your panel, or a new 240-volt outlet, becomes part of the building's electrical system. Do not rely on the "finished products" language to cover that work. If anyone tells you it does, ask the building department or DBPR.
Can a journeyman electrician install and permit a charger?
A journeyman is a trained electrician who works under a contractor. A journeyman license is not a contractor license.
Section 489.5335 lets counties and municipalities issue journeyman licenses in the electrical and alarm trades. To qualify, a person must pass a proctored exam, complete an approved apprenticeship or at least 12,000 hours of on-the-job training, and finish required building code coursework. The same section requires every county and city to recognize a journeyman license issued by any other Florida county or city.
What the statute does not say, in the text reviewed for this guide, is that a journeyman may contract with the public or pull a permit on his or her own. The contracting definitions and the prohibition in 489.127 point to the licensed contractor (or the contractor's qualifying agent) as the responsible party. In normal practice, a journeyman works for a licensed electrical contractor, and the contractor holds the contract and the permit. If someone presents himself as an independent journeyman and offers to take your job and pull the permit, ask the local building department, in writing if possible, whether it will issue a permit to that person. Do not assume it will.
What is the owner exemption, and who can use it?
Florida lets some homeowners wire their own property. Section 489.503(6)(a) exempts "an owner of property making application for permit, supervising, and doing the work" on "a single-family or duplex residence for his or her own use and occupancy and not intended for sale." The exemption also covers certain farm outbuildings, and commercial buildings with aggregate construction costs under $75,000 that the owner occupies.
The owner must:
- Apply for the permit personally. The owner must "personally appear and sign the building permit application."
- Satisfy local requirements. The local permitting agency can require proof that the owner understands the law.
- Read and accept the disclosure statement. The agency must give the owner a statement that begins: "State law requires electrical contracting to be done by licensed electrical contractors."
The disclosure statement contains several warnings that matter for an EV charger project:
- The owner may not hire an unlicensed person as the electrical contractor.
- The work must be done "according to building codes and zoning regulations."
- The owner is responsible for making sure people employed by the owner hold the licenses required by state law and local ordinance.
- Selling or leasing more than one building wired by the owner within a year after completion creates a legal presumption that it was built for sale or lease, which violates the exemption.
If an owner breaks these rules, the permitting agency can withhold final approval, revoke the permit, or pursue remedies for unlicensed activity against the owner and anyone doing work that requires a license.
The separate owner-builder disclosure in section 489.103 adds a warning about risk. It says an owner may be liable for injuries to unlicensed workers and that the owner's homeowner's insurance may not cover those injuries.
Does the owner exemption apply to rentals and condo units?
Look closely at the wording. The exemption is for a residence the owner uses and occupies, "not intended for sale." For a landlord, the home is not the owner's own use and occupancy, so the exemption is a poor fit for rental property. The statute also says the exemption does not cover anyone employed by the owner who acts as a contractor. Landlords who want a charger installed at a rental should hire a licensed contractor.
Condominium owners face an extra layer. Under 718.113(8), the association may require the owner to use "a licensed and registered firm familiar with EV charging station installation." See Florida condo EV charger law. Section 489.503(6)(b) also covers a unit owner who completes the requirements of a permit that a contractor substantially finished, but only with local approval.
For a deeper look at whether doing the work yourself makes sense, see DIY EV charger installation in Texas and Florida.
What are the penalties for unlicensed electrical work?
Section 489.127 sets out the prohibitions and penalties. It applies to people who do unlicensed work and, in some parts, to licensed contractors who misuse their license.
For the unlicensed person
- Acting as a contractor, or advertising as available to do so, without being registered or certified is prohibited (489.127(1)(f)).
- Starting or doing work that needs a building permit without a permit in effect is prohibited (489.127(1)(h)).
- A first violation is a first-degree misdemeanor (489.127(2)(a)).
- A repeat violation after a prior guilty finding is a third-degree felony (489.127(2)(b)).
- A violation during a state of emergency declared by the Governor is also a third-degree felony (489.127(2)(c)). This matters after hurricanes, when repair demand spikes and unlicensed contractors move into storm areas.
- DBPR may issue a stop-work order for all unlicensed work on a project when it finds probable cause (489.127(3)).
- Counties and cities may let code enforcement officers issue citations, with civil penalties capped at $2,000 per citation under a local ordinance (489.127(5)(c)). Each day a willful, knowing violation continues can be a separate offense.
For the homeowner who hires an unlicensed person
The statute is aimed mainly at the contractor, but the homeowner still carries risk:
- No enforceable contract. Under 489.128, the unlicensed contractor cannot enforce the contract in court, and has no lien or bond claim. That sounds like a win for you, but it also means you have a weaker paper trail if the work is bad.
- No permit means no inspection. Without an inspection, no one has checked the wiring. Insurers and home buyers can later ask for permit records.
- Insurance questions. The owner-builder disclosure in 489.103 warns that a homeowner's insurance policy may not cover injuries to unlicensed workers. For your coverage terms, ask your insurer. See also EV charger insurance.
For a licensed contractor who lends a license
Section 489.127(4) bars a certified or registered contractor from letting another person use the license number. It also bars the contractor from pulling a permit unless the contractor has a contract to do the work at that property. A violation is a first-degree misdemeanor, and a repeat violation is a third-degree felony. This "permit loaning" is a red flag for homeowners. If the person who shows up is not the person named on the permit, ask why.
Does the permit still matter if the installer is licensed?
Yes. A license and a permit are separate things. Section 553.79(1)(a) of the Florida Building Code permit law says it is unlawful to construct, alter, modify or repair any building in the state "without first obtaining a permit" from the appropriate enforcing agency.
You may have heard that Florida lets owners skip a building permit for small jobs. Section 553.79(1)(g) does require local governments to exempt single-family owners from a building permit for work valued under $7,500. But the same paragraph says the exemption does not apply to "any electrical, plumbing, structural, mechanical, or gas work performed on property containing a single-family dwelling," or to work in a flood hazard area. So the small-job exemption does not remove the permit for a charger circuit.
A separate question is whether Florida's electric vehicle charging law blocks local rules. Section 366.94 says regulation of EV charging stations is preempted to the state, and local governments may not enact or enforce ordinances related to charging stations. But 366.94(1) also says the section does not affect the ability of individuals and businesses to acquire, install or use a charger for their own vehicles, and 366.94(3)(c) tells local governments to issue permits for charging stations based on state standards. Cities including Orlando, Tampa, Jacksonville and Miami-Dade run their own building and electrical permit processes. Do not read the preemption law as meaning you need no permit for a home charger. When in doubt, call your building department. For more, see EV charger permits in Florida.
Who to call in the biggest Florida markets
| Area | Office | What the official page says |
|---|---|---|
| --- | --- | --- |
| Miami-Dade County | Building and Permits (Regulatory and Economic Resources) | Lists electrical application forms, checklists and fee sheets, and contractor licensing information |
| Tampa | Construction Services Division | Issues permits and inspections, uses Accela Citizen Access, phone (813) 274-3100 option 1 |
| Orlando | Permits and Inspections | Online permit lookup, digital plan review, inspection scheduling by text, phone or online |
| Jacksonville | Building Inspection Division | Permits submitted online through JaxEPICS, phone 904-255-8500 |
Phone numbers come from each office's page as loaded in November 2026. Confirm them before you call.
Which code edition will the contractor work under?
Your contractor works under the Florida Building Code edition in effect when the permit application is filed. Florida moves to the Ninth Edition (2026) of the Florida Building Code on December 31, 2026. Miami-Dade's Permitting and Inspection Center says permit applications and plans submitted on or after that date must comply with the new edition, and online applications received after 4 p.m. on December 30, 2026 fall under the 2026 edition. The City of Jacksonville's building division page says the Eighth Edition (2023) applies to permits submitted on or after January 1, 2024.
The International Code Council reported on September 4, 2026 that the Ninth Edition brings with it the 2023 National Electrical Code (NFPA 70). Which NEC edition the Eighth Edition references is not confirmed in the sources loaded for this guide, so ask your contractor which code the permit will be reviewed under. If your permit application is filed before December 31, 2026, the older edition governs the job for the life of the permit. A law-firm client alert from November 2026 says the same, but it is not the statute. The rule is in Fla. Stat. 553.73, so confirm with your building department.
This is not a Texas situation. Texas adopted the 2026 NEC effective September 1, 2026, and Florida did not. Do not copy a Texas code answer onto a Florida job.
What should a Florida contract and insurance certificate show?
A license check tells you the person is allowed to do the work. A written contract and proof of insurance tell you what you are buying and who pays if something goes wrong. Section 489.117 notes that registrants must meet the insurance and financial responsibility requirements of section 489.115(5), so contractors should be able to show proof.
Ask for these items:
- The exact scope. Charger model, amperage, breaker size, wire size and length of the run, outlet or hardwired, panel work, trenching, patching, and who pulls the permit.
- The license number on the contract. It should match the DBPR record.
- Permit and inspection terms. The contract should say the contractor pulls the permit, schedules the inspection, and does not ask you to sign a permit as owner if you are not doing the work. If you are not doing the work yourself, you should not be pulling an owner-builder permit.
- A certificate of liability insurance. Ask for the certificate to be sent directly to you from the insurance agent.
- Workers' compensation proof, or a clear statement of why none is required. Ask your insurance agent how coverage applies on your property.
- Warranty terms, for both the charger and the labor.
- A payment schedule tied to milestones, not a large deposit up front. Check Florida's rules on deposits and cancellation periods with DBPR or an attorney before you sign.
If your charger is in a condominium, the association can require a certificate of insurance naming it as additional insured within 14 days after approval (718.113(8)(h)).
Can an out-of-state installer do the job?
Only if the installer holds a valid Florida certification or registration. Section 489.127(1)(f) bars acting as a contractor in Florida "without being duly registered or certified." A license from another state does not substitute.
The DBPR page does list paths for people who hold licenses elsewhere. The Electrical Contractors page shows an endorsement list, a reciprocity and substantially equivalent exams page, and application forms for endorsement. So an out-of-state electrician can become licensed in Florida, but the license must be in place before the job is offered. Ask to see the Florida license record, and verify it on MyFloridaLicense.com.
The same rule applies to a company that sends crews from another state after a storm. Check the license, and confirm the crew will pull a permit.
What about HOAs, condos and landlords?
Several Florida laws touch who may do the work and what the association can demand.
- Condominiums. Under 718.113(8)(a), a condominium declaration or board may not prohibit a unit owner from installing an EV charging station in the owner's limited common element or exclusively designated parking area. Under (8)(h), the association may require the owner to follow safety rules, follow reasonable architectural standards, and "a licensed and registered firm familiar with the installation or removal and core requirements of an electric vehicle charging station." The owner pays installation, operation, maintenance, repair and insurance costs, and separately metered electricity (8)(c).
- HOAs. As of the statute text loaded on November 20, 2026, section 720.3075 does not mention EV charging. It does say that HOA documents may not stop an owner from hiring a contractor solely because the contractor is not on the association's preferred-vendor list or lacks a professional or occupational license, and the association may not require proof of such a license for entry (720.3075(3)(e)). That provision stops the HOA from policing licenses at the gate. It does not change the state licensing law. A non-licensed person still cannot lawfully do electrical contracting under Chapter 489. For the HOA picture, see Florida HOA EV charger law.
- Landlords. A landlord who adds a charger for tenants should treat it as a contracted project: licensed contractor, permit, inspection, and a written policy on electricity costs.
Questions to ask before you hire
Use this short script on the phone. The answers tell you a lot.
- What is your Florida electrical license number and type?
- Is your license certified or registered, and where are you registered?
- Will you pull the permit in your company's name? Who schedules the inspection?
- Which code edition will my permit be reviewed under?
- Have you installed this charger model (or this plug type) before?
- Who does the work: your employees or subcontractors? Are all of them covered by your insurance?
- What happens if the inspector requires changes?
- Will you give me a written quote with a line for the panel, the run length, and the permit fee?
If the answer to question 1 is a pause, a refusal or a business tax receipt number, stop. Compare quotes only among licensed contractors. See EV charger installation cost for how to read a quote, and EV charger scams and red flags.
Where to report unlicensed activity or file a complaint
If you think someone is working without a license, or a licensed contractor did poor work, start with DBPR and your local building department. The MyFloridaLicense.com site lists unlicensed activity and complaint resources, but this guide did not verify a specific complaint phone number or form, so use the contact information on the DBPR site. For permit violations, contact the city or county building department. For a civil dispute over money or damage, talk to a Florida attorney or a licensed public adjuster if an insurance claim is involved.
Section 489.127(5) lets counties and cities designate code enforcement officers to cite unlicensed activity. Some local governments run their own unlicensed contractor hotlines, so check your county or city website.
How to choose a provider
- Write down the contractor's exact name, license number and license type before you accept a quote.
- Look up the license on MyFloridaLicense.com and confirm the status is active and the type fits electrical work.
- If the contractor is registered, confirm your city or county is in the registered jurisdiction.
- Check the record for discipline and complaints.
- Get at least three written quotes from licensed contractors with the same scope.
- Confirm who pulls the permit and that the permit is in the licensed contractor's name.
- Ask for a certificate of liability insurance sent directly from the agent, and ask about workers' compensation.
- Ask which Florida Building Code edition applies to your permit date.
- In a condo, get written association approval and follow the licensed firm and insurance requirements.
- Schedule the inspection and keep the final approval record with your home documents.
- Never pay in full before the work passes inspection.
Related home ev charger installation guides
- Who Can Legally Install an EV Charger in Texas? TDLR Electrician Licenses and How to Verify One
- Do You Need a Permit to Install an EV Charger in Florida? Statute 366.94, FBC Editions and Owner-Builder Rules
- Can You Install Your Own EV Charger in Texas or Florida? DIY Rules, Risks and Insurance
- Florida Condo EV Charger Law: Section 718.113(8) Rights, Costs, Insurance and Board Rules
- Florida HOA EV Charger Rules: What Chapter 720 Does and Does Not Protect
- EV Charger Installation Scams and Red Flags in Texas and Florida: How to Verify and Where to Report
- How Much Does Home EV Charger Installation Cost? Dated Studies and What Drives Price in Texas and Florida
- EV Charger Inspection: What Inspectors Check in Texas and Florida (and How to Pass the First Time)
Home EV charger installation by state and city
Questions people ask
Do I need a licensed electrical contractor for an EV charger in Florida?
In almost every case, yes. Installing a 240-volt circuit and a hardwired charger or heavy-duty outlet is electrical contracting under Chapter 489, Part II. Only a certified or registered electrical contractor may offer or do that work for pay. The main exception is the owner exemption in 489.503(6) for a single-family or duplex home the owner occupies, and it requires the owner to apply for the permit and do the work personally. Confirm details with your building department.
Can a handyman install my EV charger in Florida?
Not unless he or she holds the right electrical license or works as a direct employee of a licensed electrical contractor, under that contractor's supervision. Under 489.505, even bidding on the work counts as contracting. Section 489.127 makes unlicensed contracting a first-degree misdemeanor. Plugging a portable cord into an existing outlet is different, but a new circuit or hardwired unit is not handyman work.
How do I verify a Florida electrical contractor license?
Search MyFloridaLicense.com by license number or name. Confirm the license type (certified or registered electrical contractor, not an alarm or sign specialty), the status (active, not inactive or suspended), the jurisdiction for registered licenses, and any discipline. A business tax receipt is not a contractor license under 489.127. Also match the name on the license to your contract and permit.
Can a journeyman electrician pull the permit for my charger?
Section 489.5335 covers how journeyman licenses are issued and recognized across Florida counties and cities. The text reviewed does not give a journeyman the authority to contract with the public on his or her own. Normally the licensed electrical contractor holds the contract and the permit. If someone offers to pull a permit as an independent journeyman, ask your local building department in writing whether it will issue it.
What are the penalties for unlicensed contracting in Florida?
Under 489.127, a first violation is a first-degree misdemeanor. A repeat violation, or a violation during a declared state of emergency, is a third-degree felony. DBPR can issue stop-work orders, and local code enforcement officers can issue citations with civil penalties up to $2,000 where the local government has adopted the process. Contracts signed by unlicensed contractors are unenforceable by them under 489.128.
Does a condo require a licensed firm to install an EV charger?
A condominium association may require it. Under 718.113(8)(h), the association can require the owner to engage a licensed and registered firm familiar with EV charging station installation, follow building-code safety rules, and give a certificate of insurance naming the association as additional insured within 14 days after approval. The association may not prohibit installation in the owner's own parking space. See the condo law guide for the full rules.
What insurance should my Florida EV charger contractor carry?
Licensed contractors must meet insurance and financial responsibility requirements, as section 489.117 references 489.115(5). Ask for a certificate of liability insurance sent directly by the agent, and ask how workers' compensation applies to everyone who will be on your property. Also call your own insurer. The owner-builder disclosure in 489.103 warns that homeowner's insurance may not cover injuries to unlicensed workers.
Does the owner-builder exemption apply to rental properties?
It is a poor fit. Section 489.503(6)(a) covers a single-family or duplex residence for the owner's own use and occupancy, not for sale. If you sell or lease more than one building you wired yourself within a year, the law presumes it was built for sale or lease. Landlords who want a charger at a rental should hire a licensed electrical contractor.
Does an out-of-state installer need a Florida license?
Yes. Section 489.127(1)(f) bars acting as a contractor in Florida without being duly registered or certified. The DBPR Electrical Contractors page lists endorsement and reciprocity paths for people licensed elsewhere, but the Florida license must be in place first. Verify any out-of-state crew on MyFloridaLicense.com before signing.
Sources
- Florida Statutes 489.505, Definitions (Electrical Contractors)
- Florida Statutes 489.503, Exemptions
- Florida Statutes 489.127, Prohibitions; penalties
- Florida Statutes 489.128, Contracts entered into by unlicensed contractors unenforceable
- Florida Statutes 489.117, Registration; specialty contractors
- Florida Statutes 489.5335, Journeyman; reciprocity; standards
- Florida Statutes 489.103, Exemptions (owner-builder disclosure)
- Florida Statutes 553.79, Permits; applications; issuance; inspections
- Florida Statutes 718.113, Maintenance; limitation upon improvement; display of flag; hurricane shutters; display of religious decorations
- Florida Statutes 720.3075, Prohibited clauses in association documents
- Florida Statutes 366.94, Electric vehicle charging stations
- DBPR Electrical Contractors' Licensing Board (license types, apply, reciprocity)
- MyFloridaLicense.com (license lookup)
- Miami-Dade County Building and Permits
- City of Tampa Construction Services Division
- City of Orlando Permits and Inspections
- City of Jacksonville Building Inspection Division
- U.S. DOE Alternative Fuels Data Center, Charging at Home
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


