New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Home EV charger installation

How Much Does Home EV Charger Installation Cost? Dated Studies and What Drives Price in Texas and Florida

No single price applies to every home. This guide lays out cost figures from named, dated government studies, shows what moves the price, and explains how to compare quotes fairly.

Government planning studies put a home Level 2 charger at roughly $400 to $1,200 for the unit and $400 to $1,700 to install, depending on the study and year. A Level 1 outlet install runs about $100 to $1,000. Panel work, long wire runs and trenching can raise the total well above those ranges. Get three written quotes for your own home.

Key facts

  • NREL's 2030 National Charging Network report (2023) assumes a home Level 2 charger costs $400 to $1,200 for hardware and $500 to $1,700 to install, in 2022 dollars.
  • The same 2023 report assumes a home Level 1 install costs $100 to $1,000.
  • An NREL assessment from September 2024 says installing a Level 2 charger at a single-family home may cost between $400 and $1,000, citing a 2022 City of Fort Collins figure.
  • DOE's Alternative Fuels Data Center, citing a national lab report, gives about $1,300 per Level 2 connector for residential installation, not including labor and permitting, and says labor is the largest expense.
  • DOE's March 2026 multifamily guide says a portable charging cord typically provided with the EV can be bought for $200 to $300 as of 2025.
  • DOE lists installation cost factors: number and type of chargers, location, trenching, existing wiring and electrical upgrades, labor and permitting.
  • EPA says a home with at least 200 amps of service and two open double-pole breaker slots likely has capacity for a Level 2 charger.
  • FPL's EVolution Home program lists a monthly program charge of $27 (equipment only) or $36 (full installation) over a 10-year agreement, plus separate per-kWh charges.
  • The federal 30C charger credit ended for property placed in service after June 30, 2026, per the IRS Form 8911 instructions.

What does a home EV charger installation cost?

There is no honest single number. The cost depends on your panel, the distance from the panel to the parking spot, the charger you choose, the permit fees in your city, and the labor rates where you live. What can be done is to show the figures that government labs and agencies have published, label each with its study and year, and explain what pushes your price up or down.

The most important rule: do not add up numbers from different studies. Each study uses its own assumptions, years and definitions. The table below keeps them apart.

Study or sourceYearWhat it coversFigure
------------
NREL, The 2030 National Charging Network (planning assumption, 2022 dollars)2023Home Level 2 charger hardware$400 to $1,200
Same report2023Home Level 2 installation$500 to $1,700
Same report2023Home Level 1 installation$100 to $1,000
NREL, Assessment of Alternative Fueling InfrastructureSept. 2024Level 2 installation at a single-family home (cites City of Fort Collins, 2022)$400 to $1,000
NREL, same assessmentSept. 2024Simple wall-mounted Level 1 unitabout $300 to $600
DOE AFDC, citing a national lab levelized cost reportcurrent pageLevel 2 residential installation per connector, not including labor and permittingabout $1,300
DOE AFDC, same sourcecurrent pageLevel 1 residential installation per connector, not including labor and permitting$400 to $600
DOE Multifamily EV Charging GuideMarch 2026 (data as of 2025)Portable charging cord that comes with an EV, bought separately$200 to $300

Notice that the three Level 2 installation figures disagree. They do so because they measure different things at different times. The 2023 NREL range is a planning assumption built from contractor-cost websites and academic sources. The 2024 NREL figure points back to a 2022 city number. The DOE figure leaves out labor and permits, which DOE says are the biggest part of a typical job. Treat all of them as a way to understand the shape of the cost, not as a quote for your house.

These figures are also not Texas or Florida figures. They are national or city-level planning numbers from 2022 to 2025. Labor rates, permit fees and construction types in Houston, Miami or Orlando may differ. That is why the last part of this guide shows you how to get quotes that can be compared.

What is included in the price, and what is not?

A Level 2 project has several separate parts. Many online "average cost" pages blur them together. Keep them apart in your quotes.

  1. The charger (the "EVSE"). This is the hardware: the wall unit or a cord set with a plug. It is a one-time purchase.
  2. The branch circuit. The dedicated wire, conduit, breaker and, for plug-in units, the outlet. This is mostly labor and materials.
  3. Panel work. A new breaker is the minimum. Some homes also need load calculations, a subpanel, a service upgrade, or a load management device.
  4. Trenching or boring. Needed when the charger is outside, in a detached garage, or on a different building from the panel.
  5. Permit and inspection. City or county fees, plus the contractor's time to apply and meet the inspector.
  6. Wi-Fi, networking and software. Some chargers are "connected" and need a stable signal. Some utility programs require connected chargers.
  7. Extras. Patching drywall or stucco, painting, a mounting post, a cable holder, a surge protection device, or a second charger.

The NREL 2023 split between hardware and installation matches this idea. It lists hardware and installation as separate lines so that readers do not count one inside the other.

Level 1 versus Level 2 in dollars

Level 1 uses the portable cord that comes with most EVs and a normal 120-volt outlet. DOE says most EVs come with a Level 1 cord set with a standard plug on one end and an SAE J1772 connector on the other, so no extra equipment is required. If a dedicated outlet is already near your parking spot, your cost can be close to zero. If not, the NREL 2023 range for a Level 1 install is $100 to $1,000, which reflects the distance and complexity of adding a dedicated circuit.

DOE adds that many drivers meet daily needs charging overnight on Level 1, as long as an outlet on a dedicated branch circuit is near the parking spot. DOE's Level 1 figure is about 5 miles of range per hour. For a driver who covers 30 to 40 miles a day, an overnight Level 1 session can restore that amount. Level 2 suits longer commutes, irregular schedules or large batteries. See EV charging levels explained.

Charger hardware costs

The NREL 2023 planning range for a home Level 2 charger is $400 to $1,200. The price differences usually come from:

  • Power rating. A 32-amp unit costs less than a 48-amp unit. EPA says Level 2 chargers range from 16 to 80 amps, with 30 to 40 amps most common.
  • Cord length and connector type. A longer cable or a different connector may cost more.
  • Smart features. Wi-Fi, scheduling, energy reports and utility program compatibility add cost. ENERGY STAR says connected, certified chargers may qualify a household for utility bill savings programs.
  • Outdoor rating. DOE says outdoor installation and use in the rain are safe, but outdoor installations require outdoor-rated equipment.
  • Safety certification. ENERGY STAR warns that not all chargers sold in the U.S. are safety certified, including some from large online and storefront retailers. DOE's March 2026 guide lists ANSI/UL 2594 as the product safety standard for Level 2 equipment, and says charging equipment should be certified by a nationally recognized testing laboratory. A very cheap unit with no listing mark can cost much more later.

Keep the charger decision separate from the install quote. If a contractor will only install their own supplied unit, ask for the model number and compare the unit price yourself.

What drives the installation price?

DOE's procurement page lists the cost factors for charging projects: the number and type of chargers, geographic location, trenching, existing wiring and electrical upgrades, labor and permitting. For a home, these turn into six questions.

1. How far is the charger from the panel?

The wire run is the biggest single variable in many homes. A panel on the garage wall with the charger on the same wall is the cheapest case. A panel at the opposite end of the house, with the wire run through an attic, a crawl space or finished walls, costs more for wire, conduit and labor. The wire gets thicker for long runs at higher amps, which also raises materials cost. DOE says labor is the largest expense of a typical installation.

2. Does your panel have room and capacity?

EPA says a home with at least 200 amps of service and two open double-pole breaker slots likely has capacity for a Level 2 charger. It says 100-amp service is often sufficient depending on other loads, and that older homes often have 60 or 100 amps. EPA also says an electrician can tell whether your existing panel can handle a charger.

If the panel is full, the options include:

  • Replacing breakers with space-saving types where the panel is rated for them.
  • Adding a subpanel.
  • Using a load management device.
  • Upgrading the panel or the service.

DOE's March 2026 multifamily guide ranks capacity strategies in rough order of affordability: low-power chargers using 25 to 50 percent less power than Level 2, meter collars, circuit splitters, smart breakers or energy management devices that pause or reduce charging when draw could exceed limits, then circuit sharing and other automated load management. The same logic applies at home. A cheaper control device can sometimes replace an expensive service upgrade.

The studies reviewed for this guide do not give a sourced dollar range for a residential panel or service upgrade, so no number is given here. If a quote includes a panel upgrade, ask the contractor to show the load calculation that requires it. See panel and service upgrade for an EV charger and load management and smart panels.

3. Is the charger outside, in a detached garage, or across a slab?

DOE lists trenching as a cost factor. Trenching and boring cost more than running wire inside a wall, and they depend on the surface you cross. Digging through lawn is different from cutting concrete or going under a driveway. Ask the contractor what the trench price assumes (depth, surface, restoration) and who pays to repair the surface.

4. Plug-in outlet or hardwired?

Plug-in installs use a receptacle, usually a 50-amp type. Hardwired installs connect the charger directly to the circuit. EPA says chargers rated at 48 amps or higher are usually required to be hardwired, and that hardwiring provides better safety while an outlet lets you swap chargers without an electrician. An outlet adds the cost of the receptacle itself. Under the 2026 National Electrical Code, section 625.44 requires 30, 50 and 60 amp receptacles used for EV charging to be listed for EVSE use, according to an EC&M summary of the code. A hardwired unit avoids a receptacle but needs a licensed installer to connect it. See NEMA 14-50 versus hardwired.

5. What size circuit does the charger need?

EPA says the breaker should be sized at least 125 percent of the charger rating, so a 40-amp charger needs a dedicated 50-amp circuit. DOE explains that EV charging is a continuous load under the NEC and requires wiring and overcurrent protection sized at 125 percent of the charger's nameplate output. A bigger charger means a bigger breaker, thicker wire and often higher cost. If your car cannot accept more than 32 amps, a 48-amp charger buys no extra speed.

6. What does your local permit cost?

Permit fees are set by each city or county and change. This guide could not verify a current fee schedule for any Texas or Florida city, so no dollar figure is given. Ask the contractor to list the permit fee as a line item on the quote. See EV charger permits in Texas and in Florida.

Note: 2026 NEC section numbers in this guide come from published trade summaries and may be renumbered in the final adopted text. Confirm them in NFPA 70-2026 or with your electrician and local inspector before relying on them.

Cost scenarios built from one study

The scenarios below use only the NREL 2023 planning ranges (2022 dollars), so the numbers are consistent with each other. They are not quotes. They show how the pieces combine.

ScenarioHardwareInstallationRange from this study
------------
Level 1 on an existing outlet, using the EV's own cord$0 (cord included)$0 to $100 if no work is neededabout $0 to $100
Level 1 with a new dedicated circuit$0 (cord included)$100 to $1,000$100 to $1,000
Level 2, simple case$400 to $1,200$500 to $1,700$900 to $2,900

The simple Level 2 total is the sum of the study's own hardware and installation ranges. The $0 to $100 line for an existing outlet is an illustration and not a study figure. If your garage already has a suitable 240-volt circuit from a dryer or a prior install, ask the electrician whether it can be used.

Now compare the second source. The 2024 NREL assessment puts the installation of a Level 2 charger at a single-family home between $400 and $1,000. Using the 2023 hardware range of $400 to $1,200 with the 2024 installation figure gives $800 to $2,200, but that mixes two studies. Use it as a rough low-end check, not a rule.

What the studies do not show is a "complicated" case. Long wire runs, trenching, an older panel or a service upgrade can lift costs above the simple-case range. Several of the larger real-world quotes you will see online fall in that category.

Texas: what to watch for in the price

Texas is large, and housing types vary, so these are items to ask about, not fixed rules.

  • Attached versus detached garages. An attached garage near the panel is the easiest case. A detached garage or carport usually needs a trench or conduit run, which DOE lists as a cost factor.
  • Slab foundations and attic routing. Many Texas homes have slab floors and attics. The electrician may route wire through the attic or surface-mount conduit on walls. Ask how the route is planned and who repairs any damage.
  • Heat. Outdoor and attic installations see high temperatures. Ask about the temperature and weather rating of conduit, wire and the charger. DOE says outdoor installations need outdoor-rated equipment.
  • 2026 National Electrical Code. The Texas Department of Licensing and Regulation (TDLR) adopted the 2026 NEC effective September 1, 2026. The City of Houston says permit applications submitted on or after that date are reviewed against the 2026 NEC. Newer code rules, such as the 2026 requirement that permanently installed Level 2 equipment be installed by a "qualified person" (section 625.4 per EC&M), can affect who may do the work, which matters for any plan to do it yourself.
  • Permit fees by city. Under Texas Occupations Code 1305.201(f), a city may not collect a permit or registration fee from a licensed electrician but may still collect a building permit fee. Practice varies. Ask for the city fee as a line item. Houston's Electrical Inspections office lists (832) 394-8860.
  • Retail provider and utility programs. In the deregulated parts of Texas, your retail electric provider bills you and a separate wires company delivers the power. Some city-owned utilities, such as Austin Energy, offer rebates. Austin Energy's page says "up to $500 or 50% of your purchase price" for a Power Partner EV compatible station, with funding limited and first-come, first-served, as of its October 1, 2026 review. See Texas EV charger incentives.

Florida: what to watch for in the price

  • Permits are required for electrical work. Section 553.79(1)(g) of the Florida Statutes exempts single-family owners from a building permit for work under $7,500, but not for electrical work, and not in a flood hazard area. Budget for a permit and inspection.
  • Coastal and flood conditions. If your home is near the coast or in a mapped flood hazard area, ask the contractor about the height of the charger and the outlet, the corrosion rating of fittings and enclosures, and any local floodplain rules. These are questions for the contractor and the building department. No dollar figure is given because none was verified.
  • Concrete block walls. Many Florida garages are concrete block with stucco. Surface-mounted conduit may be used instead of fishing wire through walls. Ask what is assumed.
  • Code edition. Florida's Ninth Edition building code, which brings the 2023 NEC, takes effect December 31, 2026. Miami-Dade says applications on or after that date must follow the new edition. The edition in effect on the date you apply is the one that governs your permit. Texas and Florida use different NEC editions in late 2026.
  • A utility program option. FPL's EVolution Home page says eligible customers can enroll in a 10-year agreement with a monthly program charge of $27 for equipment-only installation or $36 for full installation, with per-kWh energy billed separately and ownership of the charger transferring to the customer at the end. It is a utility program with eligibility rules (a single-family home or townhouse with an attached garage, a strong Wi-Fi signal, not enrolled in solar net metering or a time-of-use rate) and an early termination fee. For a simple comparison, 120 months at $27 is $3,240 and at $36 is $4,320 in program charges alone, before energy use. That arithmetic is the page's own numbers multiplied out, not a recommendation. Read the full terms at FPL.com.

Why do quotes vary so much?

You may see quotes that differ by thousands of dollars for what looks like the same charger. Common reasons:

  • Different scope. One quote includes the permit, the second leaves it to you. One includes the charger, another does not.
  • Different wire runs. Each estimator measures the path differently. Ask for the measured distance in feet.
  • Different panel assumptions. One assumes a spare breaker slot is available. Another plans a subpanel.
  • Different equipment. A 48-amp charger with a cord and a 32-amp one have different hardware prices and different wire sizes.
  • Different code reading. A contractor in a city with local amendments may include extra items. In Texas, cities can amend the state code but not make it less strict, per TDLR. In Florida, local building departments set permit procedures.
  • Different margins and availability. Busy contractors may quote higher.
  • Warranty and service. DOE notes Level 1 and Level 2 chargers may have a fixed-length warranty after which the owner pays for repairs.

Red flags in a price

  • A "flat price for any home" before anyone has seen your panel.
  • A large deposit before permits are filed.
  • No license number on the quote. See who can install an EV charger in Florida and in Texas.
  • A quote that includes "permit" as a vague line with no mention of an inspection.
  • Pressure to buy a product that is not listed by a nationally recognized testing laboratory.
  • An offer to skip the permit to save money.

How to compare quotes without brand bias

Pick the scope first, then collect at least three written quotes from licensed electrical contractors. Ask each one to price the same scope. Use this table to line them up.

Line itemContractor 1Contractor 2Contractor 3
------------
License number and type
Charger make, model and amps (or "customer supplied")
Circuit size (breaker and wire)
Wire run length in feet
Plug-in outlet or hardwired
Panel work (breaker only, subpanel, load management, service upgrade)
Trenching or boring (length and surface)
Permit fee and who pulls it
Inspection scheduling included?
Repair or patching included?
Warranty (labor and equipment)
Total and payment schedule

DOE recommends engaging the utility early and using a certified electrical contractor. For a home, that means calling your utility if you plan a service upgrade, and asking about any rebates before you buy equipment, since some programs require approval before purchase.

Are there cheaper ways to charge at home?

Yes, within limits.

  • Start with Level 1. If you drive 30 to 40 miles a day and park overnight near an outlet, the cord that came with the car may be enough. DOE says Level 1 delivers roughly 5 miles of range per hour, and that 8 hours replenishes about 40 miles for a mid-size EV.
  • Use an existing 240-volt circuit. A dryer or range circuit may be near the garage. Do not plug into a dryer outlet with a homemade adapter. DOE says adapters should carry safety certification from a nationally recognized testing laboratory, and ask a licensed electrician to review any shared-circuit idea.
  • Choose a lower-power charger. DOE's capacity ladder starts with low-power chargers that use 25 to 50 percent less power than Level 2 and cost less to wire. A 6-50 reduced-power Level 2 charger is one type DOE mentions.
  • Check for a utility rebate. In Texas, Austin Energy has a home charger rebate. CPS Energy and others have bill credits for managed charging. See utility managed charging programs.
  • Pick the right time to buy. If your utility rebate requires a purchase after you enroll, enroll first.

What not to do: skip the permit, hire an unlicensed person, or use extension cords or unlisted adapters. The savings are small compared with the risk. See EV charger cords, extension cords and adapters.

What about tax credits and rebates?

The federal 30C credit, which covered 30 percent of the cost up to $1,000 per item at a main home, ended for property placed in service after June 30, 2026. The IRS Form 8911 instructions say the One Big Beautiful Bill Act moved the end date from December 31, 2032 to June 30, 2026. Some older web pages still say "up to 30 percent." The DOE procurement page, for example, still carries that language. If your charger was placed in service on or before June 30, 2026 at a home in an eligible census tract, you may still be able to claim it on your tax return. Read the 30C guide and ask a tax professional. This guide does not give tax advice.

Texas has no statewide residential charger rebate listed by DOE's AFDC. Florida has none either, as of the AFDC reviews. Rebates and bill credits come from individual utilities. Always check the utility page and ask whether you must apply before buying.

What costs are not in advertised prices?

Watch for items that do not appear in "starting at" prices:

  • Permit and inspection fees.
  • Panel upgrade or load management hardware.
  • Trenching, boring and surface repair.
  • Extended wire runs, conduit and weatherproof enclosures.
  • An outlet, if the charger is plug-in.
  • Network, app or subscription fees. DOE says networking fees for managed chargers run about $250 to $500 per year up to more than $1,000 per year, though that figure is from DOE's multifamily guide for managed commercial and multifamily chargers and may not apply to a home unit.
  • Higher electric bills. Charging adds energy use. See what it costs to charge an EV at home in Texas and Florida.
  • Warranty repair costs after the warranty ends.
  • Surge protection or code upgrades the inspector requires.
  • Future costs, such as moving the charger or adding a second one. If you may buy a second EV, ask the contractor whether the panel and wire can be sized for it, or whether a second circuit later would be cheaper than oversizing now.

Step-by-step: get an accurate number for your home

  1. Find your panel's rating and open slots. Look for the main breaker amperage and any blank spaces. Take photos of the panel label, with the cover on and off only if you know how to do it safely. If unsure, ask the electrician to open it.
  2. Decide where the charger goes. Measure the path in feet from panel to charger.
  3. Check your car's maximum charge rate. Your owner's manual or the manufacturer's page shows the onboard charger limit.
  4. Check your utility's program page. Look for rebates and managed charging, and confirm whether any approval is needed before you buy.
  5. Collect three written quotes from licensed electrical contractors. Use the table above.
  6. Ask about the permit. Confirm who pulls it and what the fee is.
  7. Decide on the charger. Compare certified units on price and warranty.
  8. Keep the paperwork. Save the permit, inspection result, the charger's serial number and the warranty for your records and for any future sale or insurance claim.

What should you do if the quote is far above the studies?

A price above the NREL and DOE ranges is not automatically a scam. It may reflect a real panel problem or a long run. Ask the contractor to explain each line. If the explanation is vague, get another quote. If a panel upgrade is the reason, ask whether load management or a lower-amp circuit would work. See load management and smart panels.

Also ask whether the quote was written before or after the new code took effect. In Texas, permits filed on or after September 1, 2026 are reviewed under the 2026 NEC, so an older quote may miss new requirements. In Florida, the code edition on your permit application date governs, so a December 2026 filing may fall under a different edition than a January 2027 one.

How to choose a provider

  • Read your panel label and note the main breaker size and the number of open slots.
  • Measure the distance from the panel to the charger location in feet.
  • Check your EV's maximum onboard charging rate before you pick a charger.
  • Confirm any utility rebate rules before you buy equipment.
  • Get three written quotes from licensed electrical contractors for the same scope.
  • Ask each quote to list the permit fee, inspection and repair work as separate lines.
  • Ask for the load calculation if a panel or service upgrade is proposed.
  • Choose a charger with a listing from a nationally recognized testing laboratory.
  • Do not accept a quote that skips the permit.
  • Keep the permit, inspection record and warranty paperwork.
  • Ask a tax professional before claiming any federal credit for a charger placed in service before July 1, 2026.

Related home ev charger installation guides

Home EV charger installation by state and city

Questions people ask

How much does it cost to install a Level 2 charger at home?

Government studies give ranges, not one price. NREL's 2023 planning assumption is $400 to $1,200 for a home Level 2 charger and $500 to $1,700 to install, in 2022 dollars. An NREL assessment from September 2024 puts installation at $400 to $1,000. Panel upgrades, long runs and trenching can push a job above those ranges. Get written quotes for your home.

What does a Level 1 outlet install cost?

NREL's 2023 planning assumption for a residential Level 1 install is $100 to $1,000. Most EVs include a Level 1 cord, so you may need only a safe outlet on a dedicated circuit near your parking spot. If a suitable outlet already exists, your cost may be small. Ask a licensed electrician to check the outlet, wire and breaker first.

What does a panel upgrade add to the total?

The studies reviewed for this guide do not give a sourced dollar range for a residential panel or service upgrade, so none is stated here. EPA says a home with 200 amps and two open breaker slots likely has capacity. If your panel is full, ask the electrician for the load calculation and whether load management could avoid an upgrade.

Is installation more expensive in Texas or Florida?

The sources reviewed do not compare the two states, and the national studies are not state-specific. Local labor rates, permit fees, home construction and wire distance drive the price. Get three licensed quotes in your city. Texas uses the 2026 NEC from September 1, 2026, and Florida moves to its Ninth Edition code on December 31, 2026.

What do permits and inspections cost?

Fees are set by each city or county and change, and no verified schedule is given here. Ask the contractor to list the permit fee as a line item. In Florida, 553.79(1)(g) does not exempt electrical work from a permit. In Texas, a city may not collect a permit fee from a licensed electrician under Occupations Code 1305.201(f) but may charge a building permit fee, so ask your city.

Is a hardwired charger cheaper than a plug-in?

It depends. A plug-in setup adds a receptacle but lets you swap chargers without an electrician. EPA says chargers rated at 48 amps or higher are usually required to be hardwired. Under the 2026 NEC, receptacles of 30, 50 and 60 amps used for EV charging must be listed for EVSE use, per an EC&M summary. Ask for both prices.

Is there a federal tax credit for the charger?

Not for new installs. The IRS says the 30C credit cannot be claimed for property placed in service after June 30, 2026. A home charger placed in service on or before that date in an eligible census tract may still qualify at 30 percent up to $1,000. Talk to a tax professional. Some older web pages still advertise the credit.

How should I compare quotes?

Use the same scope for every quote: charger model and amps, wire run in feet, outlet or hardwired, panel work, trenching, permit, inspection and warranty. Require the license number on each quote and verify it. Compare line items, not totals. Be cautious about large deposits and any offer to skip the permit.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration