Local Guide · Home EV charger installation
Who Can Legally Install an EV Charger in Texas? TDLR Electrician Licenses and How to Verify One
Which Texas electrician licenses cover a home EV charger, how a master electrician differs from an electrical contractor, how to verify a license with TDLR and where to complain.
In Texas, anyone who performs or offers non-exempt electrical work must be licensed by TDLR and work through a licensed electrical contractor. A new 240 volt circuit or hardwired Level 2 charger is electrical work. Journeyman, master and residential wireman licensees can do it under a contractor. A handyman without a TDLR license cannot. Verify any license on TDLR's license search.
Key facts
- TDLR says anyone who performs or offers non-exempt electrical work in Texas must be licensed and work through a licensed electrical contractor.
- Occupations Code 1305.151 bars performing or offering electrical work without a license issued or recognized under Chapter 1305.
- A master electrician needs 12,000 hours of training, two years as a journeyman and an exam; a journeyman needs 8,000 hours and an exam.
- A residential wireman may only do electrical installations in single-family and multifamily dwellings not exceeding four stories.
- An electrical contractor license requires being or employing a master electrician, proof of responsibility and workers' compensation coverage unless opted out.
- Section 1305.201(b) bars a city from requiring a local exam from someone with the right state license working within its scope.
- Performing electrical work without a license is a Class C misdemeanor under section 1305.303.
- The 2026 NEC applies to all non-exempt Texas electrical work from September 1, 2026, and Texas electrician exams moved to it the same day.
Short answer: do you need a licensed electrician to install an EV charger in Texas?
Yes, in almost every case. The Texas Department of Licensing and Regulation (TDLR) says that anyone who performs, or offers to perform, non-exempt electrical work in Texas must be licensed and must perform that work through a licensed electrical contractor. Adding a 240 volt circuit or hardwiring a Level 2 charger is electrical work. Texas Occupations Code section 1305.151 backs this up: a person or business may not perform or offer to perform electrical work unless they hold a license issued or recognized under Chapter 1305.
The main exception is narrow. An owner who lives in the dwelling is exempt for work "not specifically regulated by a municipal ordinance" (1305.003(a)(6)). Read our DIY guide and the Texas permit guide before relying on it. A handyman, a general contractor or a charger salesperson is not licensed to do electrical work unless they also hold the right TDLR license or work through a licensed electrical contractor.
This is general information, not legal advice. For Florida, see who can install in Florida.
What is TDLR, and what does it do?
TDLR is the state agency that licenses electricians under Occupations Code Chapter 1305. Its Electricians page offers license applications and renewals, exam information, a path for out-of-state applicants, apprentice training program approvals, a license search, a complaint process and information on penalties. The Texas Commission of Licensing and Regulation, which oversees TDLR, adopts the state electrical code.
Chapter 1305 sets an Electrical Safety and Licensing Advisory Board, penalties and the license classes. In July 2026, the commission voted to adopt the 2026 National Electrical Code, effective September 1, 2026 for all non-exempt electrical work, and Texas electrician exams moved to the 2026 NEC at the same time. That means licensed electricians in Texas are tested on the code your charger must follow.
Texas electrician license types in plain English
TDLR's page lists these individual licenses: apprentice electrician, apprentice sign electrician, journeyman electrician, journeyman industrial electrician, journeyman lineman, journeyman sign electrician, maintenance electrician, master electrician, master sign electrician, residential appliance installer and residential wireman. Business licenses are electrical contractor, electrical sign contractor and residential appliance installation contractor.
| License | What the statute says | Relevance to a home charger |
|---|---|---|
| Apprentice electrician | Must be at least 16 and be learning and assisting under a licensed master electrician (1305.161). | Cannot work alone. Must be supervised. |
| Journeyman electrician | At least 8,000 hours of on-the-job training under a master electrician, plus an exam (1305.155). | Qualified to do electrical work, working through a licensed electrical contractor. |
| Master electrician | At least 12,000 hours of on-the-job training, two years as a journeyman, plus an exam. May perform all electrical work and supervise electricians (1305.153). | Can supervise the job. Every electrical contractor must have or employ one. |
| Residential wireman | At least 4,000 hours of training or a career and technology education program, plus an exam (1305.157). May only perform electrical installations in single-family and multifamily dwellings not exceeding four stories (1305.002(13)). | Fits a home charger installation in a house or small apartment building, working through a contractor. |
| Maintenance electrician | At least 8,000 hours of training under a master or maintenance electrician, plus an exam (1305.158). | Check scope with TDLR before relying on it for charger work. |
| Electrical contractor | A business license. Must be a master electrician or employ one, prove they are responsible as the executive director requires, and carry workers' compensation coverage or elect not to as the Labor Code allows (1305.159). | The business you hire. Work must run through it. |
| Residential appliance installer | A person other than a licensed electrician who connects a residential appliance to an existing circuit, other than by plugging or unplugging (1305.002(12-b), (12-e)). | Unclear for chargers. See below. |
Hours and exam details are in the statute. TDLR's rules may add details, and we did not cover rule-level requirements. Ask TDLR if you need more.
Master electrician versus electrical contractor
This is the most common point of confusion.
- A master electrician is a person. They have the training and have passed the exam, and they can perform all electrical work and supervise others.
- An electrical contractor is a business license. To get one, the applicant must be a master electrician or employ one, show proof of responsibility as the director requires and maintain workers' compensation coverage for employees, unless they opt out as Texas Labor Code Chapter 406 allows. A master electrician can only be assigned to one electrical contractor unless they own more than 50 percent of the business (1305.159(b)).
When TDLR says non-exempt work must be performed "through a licensed electrical contractor," it means your charger job should run on a contractor's license, with licensed electricians doing the wiring. Electrical contractors must also display their business name and license number on each vehicle they own, in letters and numbers at least two inches high on both sides (1305.166). That is a quick visual check, though a truck sticker alone proves nothing. Verify the license number.
Can a residential wireman install an EV charger?
A residential wireman license allows electrical installations in single-family and multifamily dwellings not exceeding four stories. A home charger in a single-family house falls inside that scope, as long as the wireman works through a licensed electrical contractor. A residential wireman cannot perform work outside that scope, such as electrical work at a large apartment tower, a business park or a charging station at a shopping center. For those, ask for a journeyman or master electrician working under a contractor.
We found no TDLR rule that names EV chargers as a special category requiring an extra license. Section 1305.164 also says the executive director may issue a license to an out-of-state applicant who is licensed in a state with which Texas has a recognition agreement.
What about a residential appliance installer?
Chapter 1305 creates a separate license class for residential appliance installers. "Residential appliance installation" means electrical work limited to connecting or disconnecting a residential appliance to an existing electrical circuit, other than by inserting or removing a plug. A "residential appliance" means equipment installed as a unit in a single-family or multifamily dwelling of four stories or less, directly connected to an electrical circuit, that performs a specific function, or a pool-related electrical device.
Whether a hardwired EV charger counts as a "residential appliance" under this definition is not settled by anything we could find. Even if it did, this license would not cover running a new circuit or changing a panel. Ask TDLR in writing before hiring someone who holds only an appliance installer license for charger work. For a new circuit, you need an electrician working through an electrical contractor.
Can a handyman or general contractor install an EV charger in Texas?
Not unless they hold the right license or work through a licensed electrical contractor. Section 1305.151 bars unlicensed people from performing or offering to perform electrical work. Under 1305.303, performing electrical work without a Texas license, or employing someone without the appropriate license, is a Class C misdemeanor. TDLR may also impose administrative penalties and issue cease and desist orders (1305.301 and 1305.302), and the attorney general or TDLR can seek injunctions or civil penalties.
A general contractor can manage a project but must have the electrical portion done through a licensed electrical contractor. The question is whether the person doing the wiring holds an electrical license. Ask for the license number of the person on your roof, in your panel and on your permit.
Does the installer need an EV-specific certification?
We found no Texas law or TDLR license that requires an EV-specific certification. Chargers are installed under the electrician's regular license. Some training programs and manufacturers offer optional EV installation credentials, and the 2026 NEC adds the "qualified person" wording in 625.4, per EC&M, but a training certificate is not a state license. Ask what the credential covers and who issues it. We could not verify the details of specific programs, so we do not name any.
DOE recommends using a certified electrical contractor and points to the NECA 413 standard for installing and maintaining EV chargers. Ask your installer whether they follow it and what it covers in your job.
Note: 2026 NEC section numbers in this guide come from published trade summaries and may be renumbered in the final adopted text. Confirm them in NFPA 70-2026 or with your electrician and local inspector before relying on them.
How do I verify a Texas electrician license?
- Ask for the person's full name, license type, license number and the contractor's license number.
- Go to the TDLR Electricians page and use "Search Licenses."
- Check that the license type matches the work, that it is current, and that disciplinary actions, if shown, do not concern you.
- Confirm the electrician is working through the licensed electrical contractor named on your contract and permit.
- If your city issues permits to contractors, make sure the name on the permit application matches.
A license is valid throughout Texas and is not transferable (1305.165), so a friend's or boss's license does not cover someone else.
Does the license need to be on my permit?
City permit systems usually ask for the contractor's license number. We did not find a statewide rule listing exactly what a city must collect. Section 1305.201(a) lets cities require inspections, and 1305.201(f) says a city cannot collect a permit, registration, administrative or other fee from a state-licensed electrician for work in the city, though it can collect a building permit fee. Section 1305.201(b) says a city cannot require a local exam from someone with the appropriate state license working within its scope. A municipal license is valid only in that city or one with a reciprocal agreement (1305.202).
The practical answer: the permit should name the contractor who is responsible. If someone suggests you pull the permit yourself "so you don't pay the contractor fee," ask the city whether that is allowed for your situation, and read our DIY guide.
Can an out-of-state electrician work in Texas?
Only with a Texas license or one Texas recognizes. TDLR's page links to an out-of-state applicant path. Section 1305.164 lets the executive director issue a license to an applicant who holds a license in another state and applies properly, if Texas has an agreement to recognize that state's licenses. That is a state decision about the applicant. It does not mean any out-of-state license works here automatically. Ask any out-of-state installer for their Texas license number.
How do I file a complaint?
TDLR's Electricians page has a "File a Complaint" link and pages about enforcement and penalties. Under 1305.251, a license holder can be denied or disciplined for violating Chapter 1305 or TDLR rules, and a city may request suspension of a license holder working in its jurisdiction for just cause (1305.252). Keep your contract, permit, photos, payment records and messages. For disputes about money or workmanship that go beyond licensing, an attorney or a consumer protection office may help. TDLR does not give legal advice.
What should the contract include?
No statute lists required contract terms for a home charger job that we could confirm. A clear contract commonly includes the items below. This is an editorial checklist, not a legal requirement.
- The installer's legal name, electrical contractor license number and the license numbers of the electricians doing the work.
- A written scope: charger model, amperage, circuit size, wire route, mounting location and any panel work.
- Who files the permit and who schedules inspections. Ask that the permit be in the contractor's name.
- Which NEC edition the work follows. For permits filed on or after September 1, 2026, the 2026 NEC.
- The price, deposit and payment steps, and what happens if the panel needs work.
- Proof of the listing for the charger and a copy of the manual.
- Warranty terms for labor, and who handles a failed inspection.
- A final payment tied to passing the inspection.
See red flags and scams and installation cost.
How to choose a provider
- Ask for the installer's name, license type and license number.
- Ask for the electrical contractor's license number.
- Verify both on the TDLR Electricians page, Search Licenses.
- Confirm the license type fits the work and is current.
- Confirm the person on your permit matches the person on your contract.
- Do not hire an unlicensed handyman for wiring.
- Get a written scope with charger model, amperage and circuit size.
- Ask which NEC edition the work follows.
- Ask who files the permit and who books inspections.
- Tie final payment to a passed inspection.
- Keep your contract, permit and photos.
- Know where to file a TDLR complaint if something goes wrong.
Related home ev charger installation guides
- Do You Need a Permit to Install an EV Charger in Texas? State Rules, Exemptions and the 2026 NEC
- Who Can Legally Install an EV Charger in Florida? Chapter 489 Licenses and How to Verify One
- Can You Install Your Own EV Charger in Texas or Florida? DIY Rules, Risks and Insurance
- EV Charger Installation Scams and Red Flags in Texas and Florida: How to Verify and Where to Report
- How Much Does Home EV Charger Installation Cost? Dated Studies and What Drives Price in Texas and Florida
- EV Charger Inspection: What Inspectors Check in Texas and Florida (and How to Pass the First Time)
- 2026 NEC Changes for EV Chargers: What Texas (Sept 1, 2026) and Florida (Dec 31, 2026) Homeowners Need to Know
- Do You Need a Permit to Install a Home EV Charger in Houston? Steps, Fees, Inspection and Timeline
Home EV charger installation by state and city
Questions people ask
Do I need a licensed electrician to install an EV charger in Texas?
Yes, for new circuits, hardwiring and panel work. TDLR says anyone who performs or offers non-exempt electrical work must be licensed and work through a licensed electrical contractor. The narrow owner exemption in 1305.003(a)(6) applies only to an owner who lives in the dwelling and only if no city ordinance specifically regulates the work.
What license does a Texas electrician need?
A TDLR license appropriate to the work. Individuals can hold apprentice, journeyman, master or residential wireman licenses, among others, and the work must run through a licensed electrical contractor. Verify the license type, number and status on TDLR's license search before work starts.
What is the difference between a master electrician and an electrical contractor?
A master electrician is a person with at least 12,000 hours of training, two years as a journeyman and a passed exam. An electrical contractor is a business license that requires being, or employing, a master electrician, proof of responsibility and workers' compensation coverage unless opted out under the Labor Code.
How do I verify a Texas electrician license?
Use the TDLR Electricians page and its Search Licenses link. Ask the installer for their name, license type and number, and the electrical contractor's license number. Check that the license is current and that the contractor on your contract matches the one on your permit.
Can a residential wireman install an EV charger?
Yes within scope, if the work is in a single-family or multifamily dwelling not exceeding four stories and it runs through a licensed electrical contractor. A residential wireman cannot do work outside that scope, such as larger commercial buildings.
Can a handyman install an EV charger in Texas?
Not unless they hold the right license or work through a licensed electrical contractor. Performing electrical work without a Texas license is a Class C misdemeanor under 1305.303, and TDLR can impose administrative penalties. Ask for a license number and verify it.
Does the installer need an EV-specific certification?
We found no Texas license for EV installation. Chargers are installed under standard electrician licenses. Manufacturer and trade training are optional credentials, not licenses. The 2026 NEC adds a qualified-person rule in 625.4, per EC&M. We could not verify specific programs.
What is TDLR and how do I file a complaint?
TDLR is the Texas Department of Licensing and Regulation, which licenses electricians and enforces Chapter 1305. Its Electricians page has a File a Complaint link. Keep your contract, permit, photos and payment records.
Does the license need to be on my permit?
City systems usually ask for the contractor's license number, though we found no statewide rule listing every required field. Cities cannot collect permit or administrative fees from a licensed electrician but may collect a building permit fee (1305.201(f)). Ask your city for its requirements.
Can an out-of-state electrician work in Texas?
Only with a Texas license or one Texas recognizes under an agreement (1305.164). TDLR's page has an out-of-state applicant path. Ask for the Texas license number and verify it.
Does a municipality require its own license?
A city may issue municipal licenses and offer exams (1305.201(a)), but cannot require a local exam from someone with the right state license working within scope (1305.201(b)). A municipal license is valid only in that city or under a reciprocal agreement (1305.202). The state license is the main credential.
What should a contract include?
The installer's licenses, a written scope with the charger model and circuit size, who files the permit, the NEC edition, price and payment steps, listing proof and manual, labor warranty terms and a final payment tied to passing inspection. No statute lists required terms that we could confirm, so this is an editorial checklist.
Sources
- TDLR Electricians program
- Texas Occupations Code Chapter 1305 (Electricians)
- TDLR bulletin: Commission adopts 2026 NEC
- TDLR rulemaking: 16 TAC 73.100 adoption
- EC&M: Top 25 changes to the 2026 NEC
- U.S. DOE AFDC: Charging at home
- U.S. DOE: Multifamily EV charging guide (March 2026)
- Houston Permitting Center: 2026 NEC effective September 1, 2026
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


