Local Guide · Foundation repair contractors
Slabjacking, Mudjacking and Polyurethane Foam: What Do They Fix and What Don't They?
How slab lifting works, what it costs by dated source, where it belongs (driveways, patios, voids) and why it does not replace piers under a house on Texas clay or a Florida sinkhole repair.
Mudjacking pumps a cement slurry under a sunken slab; polyurethane foam lifting injects an expanding two-part foam that weighs about 3 to 6 pounds per cubic foot. Both work well on driveways, walks, patios, pool decks and garage slabs, and This Old House (2026) puts mudjacking jobs at $550 to $1,300. Neither fixes the cause of sinking, and on Texas clay neither replaces engineered piers under a house; engineers pair injection with piers for long-term support.
Key facts
- The ASCE Texas Section repair guidelines (Version 3, 2022) list grouting and mudjacking as recognized slab repair methods alongside underpinning, crack injection and tendon stressing.
- ASCE Texas says grouting or mudjacking can provide temporary support atop shallow footings or long-term support atop deep piles or piers, and should not be done beneath underpinned foundations if soil swelling could damage the structure.
- This Old House (updated Oct. 8, 2026, Angi data) puts mudjacking and slabjacking at $550 to $1,300 per job.
- Bob Vila (Aug. 2023) lists slabjacking at $3 to $6 per square foot and polyurethane leveling at $5 to $25 per square foot.
- One manufacturer's 3 pcf lifting foam lists a free-rise density of 2.75 to 3.25 pcf (ASTM D1622), 50 psi compressive strength and about 90% strength in 15 minutes.
- Tex. Occ. Code 1001.056(c)(2) removes the private-dwelling engineering exemption for slab design on IRC-classified expansive soil.
- Houston requires Texas-licensed engineer plans showing support locations for slab-on-grade foundation repair.
- Florida Senate staff (2011) described sinkhole grouting as injecting cement, sand, fly ash and water to densify soils and seal the limestone surface.
- On a verified Florida sinkhole loss, repairs must follow the insurer's engineer's recommendations (Fla. Stat. 627.707(5)).
What are slabjacking, mudjacking and polyurethane foam lifting?
Slabjacking is the umbrella term for raising a sunken concrete slab by pumping material underneath it. Crews drill small holes through the slab, inject a material under pressure, and let that pressure push the slab back up. Once the void is full and the slab is at the target height, the holes are patched.
There are two main families:
- Mudjacking (also called slurry jacking or grout jacking) pumps a cement-based slurry. Mixes vary by crew, but they are usually some blend of cement, sand or soil, fly ash and water. Some contractors use a stone slurry, sometimes sold as "sandjacking."
- Polyurethane foam lifting (also called polyjacking or foam jacking) injects a two-part liquid polymer. The two parts mix in the gun, react, and expand into a rigid, closed-cell foam that fills the void and lifts the slab.
Both methods are used every day on driveways, sidewalks, patios, pool decks, garage floors, porch slabs and steps. Both can also fill hollow spots under a slab without lifting it. The harder question, and the one most sales pages skip, is what these methods can and cannot do for the slab your house actually sits on. We cover that below.
The ASCE Texas Section's Guidelines for the Evaluation and Repair of Residential Foundations (Version 3, 2022), the main engineering reference for Texas house foundations, lists grouting and mudjacking as recognized slab repair methods alongside underpinning, crack injection, tendon stressing and partial rebuilds. It draws a useful line: grouting generally gives continuous support under a slab without lifting it much, while mudjacking is done to adjust elevations hydraulically with continuous, uniform support.
How does each method work, step by step?
Mudjacking
- The crew marks the low areas and drills holes through the slab, usually larger than foam holes because a thick slurry has to pass through them.
- A pump forces the slurry into the void. The slurry spreads, fills the gap and then starts pushing the slab up.
- The operator watches string lines, levels or lasers and moves from hole to hole to lift evenly.
- Holes are filled with a cement patch. The slurry needs time to cure before heavy loads such as cars return.
Polyurethane foam lifting
- The crew drills small holes, typically far smaller than mudjacking holes.
- A two-component liquid is injected through a port. It expands within seconds, fills voids and then lifts.
- Injection is done in short shots so the operator can control the rise. Foam keeps expanding briefly after each shot, so experienced operators stop slightly early.
- Holes are patched. One manufacturer's data sheet for a common 3-pound lifting foam says it reaches 90 percent of full strength in about 15 minutes, though the same maker tells installers to confirm return to service for the actual loads and site.
In both methods the slab only goes up if it can. A slab that is cracked into pieces, pinned under a wall, or tied to a structure may break further or not move at all. A good operator will tell you before drilling which pieces will move and which will not.
Mudjacking vs polyurethane foam: how do they compare?
Vendors of each method tend to oversell their own product. The table below sticks to differences that come from the materials themselves or from published, dated sources.
| Factor | Mudjacking (cement slurry) | Polyurethane foam |
|---|---|---|
| Material | Cement, sand or soil, fly ash and water, mixed on site | Two-part polymer that expands into a rigid closed-cell foam |
| Weight added under the slab | Heavy: a cement-based slurry adds real weight to the soil it sits on | Light: one manufacturer lists free-rise densities of 3 to 6 pounds per cubic foot across its lifting foams |
| Hole size | Larger | Smaller |
| Time before use | Longer cure | Short; one data sheet cites 90% strength in about 15 minutes |
| Control of lift | Good with experienced operator | Fine control in small increments; risk of over-lift if rushed |
| Water exposure | Slurry can wash out over time if water keeps flowing under the slab | Closed-cell; one data sheet lists 92% closed cells and under 8% water absorption |
| Typical published price (per sq ft) | From about $3 per sq ft (Bob Vila, Aug. 2023) | $5 to $25 per sq ft (Bob Vila, Aug. 2023) |
| Fixes the cause of sinking? | No | No |
That last row matters most. Neither material fixes the reason the slab sank in the first place, whether that is washed-out fill, a leaking pipe, poor drainage, or clay that shrinks in drought. Fixr's January 2025 concrete leveling guide says the same thing about mudjacking: it does not address the underlying cause, so settling can come back. The same logic applies to foam.
Which is "better"?
It depends on the job, not the brand:
- Foam often makes sense where weight matters (a slab sitting on soft or wet soil), where you need the surface back in service quickly, where holes must be small for appearance, or where water may flow under the slab again.
- Mudjacking often makes sense for large, simple voids under flatwork where cost per square foot is the main concern and added weight is not a problem.
- Neither makes sense when the concrete is badly broken, when the slab keeps dropping because of an active cause you have not fixed, or when the problem is your house foundation moving with deep clay. In those cases, replacement or an engineered repair is the honest answer.
What do foam densities and data sheets actually tell you?
Lifting foams are sold by density, measured in pounds per cubic foot (pcf). Higher density generally means higher compressive strength and higher cost per gallon. Data sheets usually report "free-rise" density, which is what the foam weighs when it expands in open air. Under a slab the foam is confined, so the in-place density is higher than the free-rise number.
As one example of what a real data sheet looks like, a widely used 3 pcf lifting foam lists:
- Free-rise density: nominal 3 pcf, range 2.75 to 3.25 pcf (tested by ASTM D1622)
- Free-rise compressive strength: 50 psi, or 7,200 pounds per square foot
- Closed-cell content: 92 percent; water absorption: less than 8 percent
- About 90 percent of full strength in about 15 minutes
- NSF/ANSI/CAN 61 and 372 certification for contact with drinking water, subject to listed conditions, and not intended for pipe application
The same manufacturer sells related lifting foams at 4, 4.75 and 6 pcf. We cite this sheet only as an example of the specs to ask for, not as an endorsement. Other manufacturers publish similar sheets.
What to ask your contractor
- Which product and density will you use, and why that density for this slab and load?
- Can I have the technical data sheet (TDS) and safety data sheet (SDS)?
- Is there a drinking-water certification, and does it matter here? (It can matter near wells or water tanks.)
- How many pounds or gallons do you estimate, and how do you bill if you use more?
Environmental and safety notes
Cured polyurethane is a rigid plastic. While liquid, the two components are industrial chemicals, so crews should wear protective gear and follow the safety data sheet. Ask that pets and children stay inside or away during injection, and that the crew keep foam out of drains, irrigation boxes and utility lines. "Green" claims vary; one manufacturer's own page for its lifting foam made no environmental claim for the foam itself. Treat marketing words like "eco-friendly" as a question to ask, not a fact.
Where slabjacking works well: driveways, walks, patios, pool decks and garages
Slabjacking is mainly a flatwork tool. Common uses:
- Driveways and approach slabs that dropped at the garage or the street, often where fill under the edge washed out.
- Sidewalks and walkways with trip hazards at a joint.
- Patios and porch slabs that tipped toward the house and now drain water against the foundation. Lifting them to slope away can be a real drainage fix.
- Pool decks that settled around the pool shell. Foam is often chosen here because of its small holes and quick return to use, but the cause (a leak, poor compaction) must be checked.
- Garage floors that are floating slabs separate from the house foundation.
- Steps and stoops pulling away from the house.
- Void filling under slabs where soil washed out but the slab has not dropped yet.
Published prices for flatwork
Cost guides disagree, so we show more than one, with dates. Use them as a rough check, not a quote.
| Source and date | What it measured | Range |
|---|---|---|
| This Old House, Oct. 8, 2026 (Angi data) | Mudjacking and slabjacking, per job | $550 to $1,300 |
| Bob Vila, Aug. 31, 2023 | Concrete leveling, per job | $630 to $1,723; average $1,174 |
| Bob Vila, Aug. 31, 2023 | Driveway / patio / sidewalk / garage / steps | $600 to $3,000 / $500 to $1,100 / $150 to $800 / $500 to $2,500 / $200 to $600 |
| Bob Vila, Aug. 31, 2023 | Per square foot: slabjacking vs poly leveling | $3 to $6 vs $5 to $25 |
| Fixr, Jan. 31, 2025 | Concrete leveling, 100 sq ft | $500 to $1,700; average $1,500 |
| Fixr, Jan. 31, 2025 | Stone slurry vs polyurethane, per sq ft | $3 to $7 vs $20 to $25 |
| Fixr, Jan. 31, 2025 | Foundation jacking, per sq ft | $5 to $8 |
Notice that the per-square-foot numbers for foam differ widely between sources. Foam jobs are often priced by the pound or by a job minimum, so a small walkway and a large driveway can land far apart. For the full picture of foundation pricing, see our foundation repair cost guide.
When replacement beats lifting
- The slab is broken into many small pieces or crumbling at the surface.
- The slab has dropped and lifted repeatedly because the cause was never fixed.
- Tree roots are pushing the slab up (lifting can't fix heave).
- The slab is too thin or has no reinforcement and keeps cracking.
Can foam or mudjacking lift a house foundation?
This is where the most confusion lives. The short answer: injection can raise and fill under a house slab, but on its own it does not add deep support. It rests on the same near-surface soil that moved in the first place.
The ASCE Texas guidelines say grouting or mudjacking under a house foundation "may be accomplished with temporary support atop shallow footings or long-term support atop deep piles or piers." Put simply, the engineering reference treats injection alone as temporary, and pairs it with deep piers when long-term support is the goal. The same section warns that grouting or mudjacking should not be done beneath underpinned foundations if expected swelling of the injected soil is enough to damage the structure.
Why clay soil is the problem in Texas
Much of Houston, Dallas-Fort Worth, Austin and San Antonio sits on expansive clay that swells when wet and shrinks when dry. The layer that changes moisture through the seasons is often called the active zone. If your slab dropped because the clay under one side dried out in a drought, filling the gap with foam can bring the floor back up. But when rain returns, that same clay can swell, and now there is extra material under the slab. Engineers worry about exactly this, which is why ASCE warns against injecting beneath underpinned foundations where swelling could cause damage.
That is also why Texas law treats house slab work on expansive soil seriously. The Texas Engineering Practice Act's private-dwelling exemption does not cover engineering design for constructing, altering or repairing a residential slab on expansive soil as classified under the International Residential Code, unless the work meets the code as applied locally (Tex. Occ. Code 1001.056(c)(2)). Houston requires that slab-on-grade foundation repair plans be prepared by a Texas-licensed engineer showing the location, quantity and type of supports. See expansive clay soil in Texas and who regulates foundation repair in Texas.
Where injection under a house can make sense
- Filling voids after piers. When a house is lifted on piers, a gap can open between the slab and the soil. Some engineers specify grout or foam to fill that gap so the slab is supported between piers.
- Voids from a plumbing leak. If a sewer or supply leak washed soil out from under part of the slab, fixing the leak and then filling the void can be a reasonable plan. See plumbing leaks under slab foundations.
- Sandy soils. In much of Florida, settlement under slabs is often caused by loose or poorly compacted sand or organic layers rather than seasonal clay. Injection can densify or fill those areas, but an engineer should confirm the cause first.
- Light structures. Detached garages, sheds and some additions on floating slabs.
Questions to ask if someone proposes foam under your house
- What caused the slab to drop, and how do you know?
- Is there an engineer's report or a floor elevation survey? Will you follow it?
- What happens if the clay swells after a wet season?
- Will you test the plumbing before and after? (ASCE says supply and drain lines should be tested if jacking or lifting is part of the repair.)
- Is a permit required in my city, and who pulls it?
- What does your warranty cover if the area drops again?
Combining piers with grout or foam
Piers and injection are not rivals. On many engineered repairs they are used together:
| Combination | What each part does | When it is used |
|---|---|---|
| Piers, then void fill | Piers carry the load to deeper soil; grout or foam fills the gap opened under the slab by lifting | Slab-on-grade houses lifted on pressed concrete, steel push or helical piers |
| Piers plus slab-interior injection | Perimeter piers lift the edge; injection supports an interior area the piers don't reach | When interior piers aren't practical; engineer decides |
| Ground grouting plus underpinning | Deep grout fills and densifies soils and seals the limestone surface; steel pipe piles stabilize the foundation | Florida sinkhole stabilization, as specified by the insurer's or owner's engineer |
If a contractor offers foam as a cheaper substitute for piers that an engineer specified, get that change in writing from the engineer. The ASCE Texas guidelines say the engineer who seals the repair documents is the engineer of record and has approval authority over changes. For the pier options themselves, see foundation repair methods compared, pressed concrete piles, steel push piers and helical piers.
Is foam used for Florida sinkhole repairs?
Yes, but sinkhole grouting is a different job from slab lifting, even when both use the word "grout" or "foam."
- Slab lifting works in the top few inches to a few feet under concrete.
- Sinkhole stabilization works deep in the ground. Florida Senate staff in 2011 described the two most common recommended techniques as grouting, which injects a cement, sand, fly ash and water mixture into the ground to densify soils and seal the top of the limestone to limit future raveling, and underpinning, which drives or drills steel pipes to stabilize the foundation.
The Florida Geological Survey says sinkhole repair techniques range from grout and/or foam injection to engineered reinforced plugs, pins and porous concrete. It also says licensed home inspectors and insurance adjusters are not trained or qualified to determine whether sinkhole activity is present; licensed professional geologists or engineers are.
Insurance rules that change the repair
- On a verified sinkhole loss, the policyholder must repair according to the recommendations of the insurer's professional engineer (Fla. Stat. 627.707(5)).
- The insurer may limit payment to actual cash value, which leaves out underpinning, grouting and other below-foundation work, until you sign a contract for stabilization and foundation repair (627.707(5)(a)). You must sign that contract within 90 days after the insurer confirms coverage (627.707(5)(b)).
- After repairs, the monitoring professional engineer must certify the work was properly performed and record that report with the county clerk (627.7073(3)).
- Accepting a rebate from a sinkhole repair contractor voids coverage, and offering one is insurance fraud, a third-degree felony (627.707(5)(f)).
So if a contractor offers to "just foam" a slab in Hernando, Pasco or Hillsborough County after you notice cracking, stop and ask whether sinkhole activity has been ruled out. A shallow lift that ignores a deeper problem can complicate an insurance claim. See sinkhole signs and testing, the Florida sinkhole claim process and Florida sinkhole coverage.
Also note: the Florida Geological Survey lists look-alike causes of ground settling that are not sinkholes, such as compressing clay or organic layers, decomposing stumps or buried debris, broken sewer, drain or septic lines, and poorly compacted soil. Those are the cases where shallow injection is more likely to be part of the fix.
How long does slabjacking last?
No neutral, long-term study we found gives a reliable lifespan number for either method, and the cost guides we reviewed do not publish one. Bob Vila's 2023 guide says foam "can maintain its structural integrity for years" without a number. Be cautious with any specific "lasts 30 years" claim unless it comes with a written warranty.
In practice, how long a lift lasts depends mostly on whether the cause was fixed:
- Water keeps running under the slab (a downspout dumping at the edge, a broken irrigation line): expect the void to come back, especially with slurry, which can wash out.
- Clay keeps shrinking and swelling: the slab will keep moving with the soil.
- Fill was simply loose and has now been filled and the drainage corrected: the lift has its best chance of lasting.
Pair any lift with the basics: gutters that discharge well away from the slab, soil sloped away, and sealed joints between slab sections. See drainage, gutters and grading.
Do I need a permit for slabjacking in Texas or Florida?
It depends on what you are lifting and where you live:
- Flatwork (driveway, sidewalk, patio) generally does not involve the house structure, but rules for driveways in the right-of-way vary by city. Call your city before work on a public sidewalk or driveway approach.
- Houston defines foundation repair as repairing fractures in slabs and stabilizing a structure that has moved from its original design. Slab-on-grade foundation repair requires plans from a Texas-licensed engineer showing the location, quantity and type of supports.
- Austin lists a foundation repair that does not exceed 128 square feet as exempt from a building permit, which implies larger foundation repairs need one. Confirm with Austin Development Services.
- San Antonio lists foundation repair as a permit issued over the counter.
- Fort Worth lists engineered foundation plans and an engineered structural letter as submittals for foundation repair.
- Florida: state law makes it unlawful to repair a building without first obtaining a permit from the local enforcing agency (Fla. Stat. 553.79), and the Florida Building Code allows ordinary minor repairs without a permit only with building official approval and only if no structural beam or load-bearing support is cut or removed. Work on a foundation, which Florida law treats as a structural component, generally falls under a general, building or residential contractor (Fla. Stat. 489.113(3)(a), 489.105).
For city-by-city detail, see foundation repair permits by city and Florida foundation repair licensing.
Can I mudjack a driveway or patio myself?
Homeowners can rent some equipment, but true slabjacking is hard to do well without experience. The risks: cracking the slab by lifting unevenly, blowing slurry or foam into places it should not go (drains, under the house, into a crawl space), and over-lifting a section so it becomes a new trip hazard. Two-part foam also involves chemicals that require protective equipment.
Simpler DIY steps that help regardless of method:
- Fix the water source first: extend downspouts, correct grading, repair irrigation leaks.
- Seal the joint between the slab and the house, and between slab sections, with a flexible sealant to keep water out.
- For small trip hazards on a sidewalk, grinding the raised edge is sometimes enough.
Anything touching your house foundation should be left to a pro working from an engineer's plan. See what foundation work you can DIY.
How to compare slabjacking quotes
Ask every bidder to put these in writing so you can compare like for like:
| Line item | What to ask |
|---|---|
| Method and product | Slurry mix or foam product, density, data sheet |
| Areas and square footage | A sketch showing each slab section to be lifted |
| Target | How much lift, to what reference (string line, laser, the garage floor) |
| Pricing basis | Per job, per square foot, per hole, or per pound of foam; overage rules |
| Hole patching | Color match and number of holes |
| Joint sealing | Included or extra |
| Cause | Their written opinion on why it sank and what you should fix |
| Warranty | Term, what it covers if the slab drops again, exclusions |
| Damage | Who pays if a slab cracks during the lift |
For structured comparison of bigger foundation quotes, see how to compare foundation repair quotes and our warranty guide.
Door-to-door offers
If a salesperson signs you up at your home, Texas and Florida law both give a three-business-day right to cancel many home solicitation sales over $25 (Tex. Bus. & Com. Code 601.051; Fla. Stat. 501.025), and the federal FTC Cooling-Off Rule requires a written cancellation notice for door-to-door sales of $25 or more at your home (16 CFR 429.1). Exceptions apply, such as Florida's exclusion for sales that result from your own request for specific services, so read your contract.
How to choose a provider
- Find and fix the cause first: leaks, downspouts, grading, irrigation.
- Decide whether the slab is flatwork or part of the house foundation.
- For the house slab, get an engineer's evaluation before any lifting.
- Ask each bidder for method, product density and data sheets in writing.
- Get a sketch of every section to be lifted and the target height.
- Confirm pricing basis and overage rules (per job, sq ft or pound).
- In Florida sinkhole counties, rule out sinkhole activity before shallow repairs.
- Ask about permits for your city and who pulls them.
- Ask for plumbing tests before and after if the house slab is lifted.
- Get the warranty terms and damage responsibility in writing.
- Seal joints and keep water away from lifted slabs afterward.
Related foundation repair contractors guides
- Which Foundation Repair Method Is Best? Piers, Piles, Slabjacking and Foam Compared
- How Much Does Foundation Repair Cost in Texas and Florida? Real Price Ranges by Method
- Is a Cracked Garage Floor, Driveway, Patio or Pool Deck a Foundation Problem?
- Expansive Clay Soil and Your Foundation: Why Do Texas Homes Move?
- Is It a Sinkhole? Warning Signs, Testing and What To Do in Florida
- Slab Leaks and Foundation Damage: Which Came First, How to Test, and Who Pays?
- How Do Drainage, Gutters and Grading Protect a Foundation?
- How Do You Compare Foundation Repair Quotes Line by Line?
Foundation repair contractors by state and city
Questions people ask
What is mudjacking?
Mudjacking is a way to raise a sunken concrete slab by drilling holes and pumping a cement-based slurry underneath. The slurry fills the empty space and the pressure pushes the slab back up. It is used mostly on driveways, sidewalks, patios and steps. This Old House (October 2026, Angi data) lists mudjacking and slabjacking jobs at $550 to $1,300. It does not fix why the slab sank, so drainage or leaks must be corrected too.
What is polyurethane foam leveling (polyjacking)?
Polyjacking injects a two-part liquid through small holes in the slab. The liquid reacts and expands into a rigid, closed-cell foam that fills voids and lifts the concrete. Lifting foams are sold by density, commonly about 3 to 6 pounds per cubic foot, so they add little weight to the soil. One manufacturer reports about 90 percent of full strength in roughly 15 minutes. Prices run higher than mudjacking per square foot in most published guides.
Mudjacking vs polyurethane foam: which is better?
Neither is better for every job. Foam is lighter, uses smaller holes, returns to service fast and resists washout, which helps on soft or wet soil and pool decks. Mudjacking usually costs less per square foot on simple flatwork voids. Both fail if the cause, such as a leak or poor drainage, keeps going. For a house foundation on Texas clay, neither replaces piers; an engineer should decide whether injection belongs in the plan at all.
Can foam lift a house foundation?
Foam can physically raise a house slab, but it rests on the same shallow soil that moved. The ASCE Texas guidelines describe injection on shallow support as temporary and pair it with deep piers for long-term support. They also warn against injecting under underpinned foundations where clay swelling could cause damage. In Texas, slab repair design on expansive soil falls under the Engineering Practice Act, and Houston requires engineer-sealed plans for slab foundation repair.
How long does slab foam lifting last?
We found no neutral, long-term study that gives a reliable lifespan, and the cost guides we reviewed do not publish one. How long a lift lasts depends mostly on whether the cause was fixed. If water still runs under the slab or clay keeps shrinking and swelling, the slab can move again. If loose fill was the only problem and drainage is corrected, the lift has its best chance. Get any lifespan promise as a written warranty.
Is polyurethane foam safe under a house?
Cured lifting foam is a rigid plastic, and some products carry NSF/ANSI 61 certification for drinking water contact under listed conditions. The liquid components are industrial chemicals, so crews need protective gear and should follow the safety data sheet. The bigger safety issue is structural: foam under a house slab does not add deep support, and over-lifting can crack slabs or stress plumbing. Ask for an engineer's plan and plumbing tests before and after.
Can foam fill voids under a slab?
Yes. Void filling is one of the most common uses, for example after soil washed out from a plumbing leak or after a house was lifted on piers and a gap opened under the slab. ASCE notes that grouting gives continuous support without much lift. Always fix the source of the void first. If a sewer or supply leak caused it, repair and test the line before filling, or the void will return.
Does foam work on expansive clay?
It can lift a slab that dropped when clay dried out, but it cannot stop clay from swelling later. When rain returns, the clay can push up against the added material. That is why Texas engineers treat injection under house slabs with caution and why ASCE warns against injecting under underpinned foundations where swelling could cause damage. For driveways and patios on clay, foam is common, but expect some seasonal movement to continue.
How much does slabjacking cost?
Published 2023 to 2026 figures vary. This Old House (October 2026) lists $550 to $1,300 per job. Bob Vila (2023) lists $630 to $1,723 with a $1,174 average, $3 to $6 per square foot for slabjacking and $5 to $25 for polyurethane. Fixr (January 2025) lists $500 to $1,700 for 100 square feet. Foam is often priced per pound with a job minimum, so get written quotes for your exact slabs.
Can I mudjack a driveway or patio myself?
It is possible to rent equipment, but uneven lifting can crack the slab, and slurry or foam can end up in drains or under the house. Two-part foam requires protective gear. Most homeowners get better results by fixing drainage, extending downspouts and sealing joints themselves, then hiring an experienced crew for the lift. Never attempt injection under your house foundation without an engineer's plan.
Is foam used for sinkhole repairs?
Yes, but deep sinkhole stabilization is a different job from slab lifting. The Florida Geological Survey says repairs range from grout and/or foam injection to engineered plugs, pins and porous concrete. Insurance-paid sinkhole repairs must follow the insurer's engineer's recommendations under Fla. Stat. 627.707, and the monitoring engineer must record a certification with the county clerk afterward. Have a geologist or engineer rule out sinkhole activity before any shallow lift.
Will slabjacking fix a slab that tilts toward my house?
Often, yes. Lifting a patio or walkway so it slopes away from the house can stop rainwater from collecting at the foundation, which is a real drainage improvement. The ASCE Texas guidelines recommend ground slopes of at least 5 percent away from the foundation for the first 10 feet where practical. Seal the joint between the slab and the house after the lift so water does not run into the gap.
Sources
- ASCE Texas Section, Guidelines for the Evaluation and Repair of Residential Foundations, Version 3 (2022)
- This Old House, How Much Does Foundation Repair Cost? (updated Oct. 8, 2026)
- Bob Vila, How Much Does Mudjacking, or Concrete Leveling, Cost? (Aug. 31, 2023)
- Fixr, Concrete Leveling Cost (updated Jan. 31, 2025)
- Manufacturer technical page for a 3 pcf structural lifting polyurethane (AP Lift 430)
- Texas Occupations Code ch. 1001, Texas Engineering Practice Act
- Houston Permitting Center, Foundation Repair
- City of Austin, Work Exempt from Building Permits
- City of San Antonio DSD, Residential Permits
- City of Fort Worth, Residential Remodel Checklist and Packet
- Florida Senate, SB 408 (2011) Rules Committee analysis
- Florida DEP / FGS, Sinkhole FAQ
- Florida DEP / FGS, Subsidence Incident Reports
- Fla. Stat. 627.707 (2025)
- Fla. Stat. 627.7073 (2025)
- Fla. Stat. 553.79 (2025)
- Florida Building Code 2023, Chapter 1 (UpCodes)
- Fla. Stat. 489.105 and 489.113 (2025)
- Texas Business and Commerce Code ch. 601 (home solicitation cancellation)
- Fla. Stat. 501.025 (2025)
- 16 CFR Part 429, FTC Cooling-Off Rule (eCFR)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


