Local Guide · Roofing
Roof Warranties Explained: Manufacturer vs Workmanship, Transferability, and What Voids Them
A neutral, cross-brand guide to shingle and roofing warranties for Texas and Florida owners: material vs system vs workmanship coverage, what 'lifetime' and 'non-prorated' really mean, wind warranty conditions, transfers, claims, and how warranties differ from insurance.
A manufacturer warranty covers defects in the roofing products; a workmanship warranty from your roofer covers installation errors. 'Lifetime' usually means as long as you own a single-family home, with full coverage only for an initial period and reduced (prorated) coverage after. Extended system warranties can add workmanship coverage but require matching components and a certified installer. Warranties generally do not cover storm damage; that is what insurance is for. Register the warranty, keep your invoice, and follow transfer rules when you sell.
Key facts
- Owens Corning describes three main warranty types: the standard manufacturer warranty on products, the contractor's workmanship warranty, and an extended manufacturer warranty that adds workmanship coverage (Owens Corning).
- Owens Corning says most manufacturer warranties cover only defective materials, and standard warranties don't cover failures caused by installation mistakes (Owens Corning).
- Owens Corning's standard limited lifetime warranty reduces coverage after 25 years based on roof age, and its warranties exclude tear-off and disposal costs (Owens Corning).
- To transfer an Owens Corning warranty, the second owner must contact the company within 60 days of the real estate transfer; the fee can be upwards of $100 depending on the warranty (Owens Corning).
- Owens Corning says its 160 mph wind coverage applies only when its component requirements are met and starter shingles are installed on both eaves and rakes (Owens Corning).
- CertainTeed says its standard 110 mph wind rating upgrades to 130 mph with the right starter and hip and ridge accessories, and its SureStart early-defect coverage is typically 10 years (CertainTeed).
- Owens Corning's home buyer guide says damage from severe weather, fallen branches, poor ventilation or lack of maintenance is commonly excluded from roof warranties (Owens Corning).
- Florida's Chapter 558 notice-and-repair process applies to construction defect claims, including failures to meet accepted trade standards (Fla. Stat. 558.002).
- Texas Property Code Chapter 27 governs construction defect claims against residential contractors and requires 60 days' written notice before suit (Tex. Prop. Code 27.004).
- Metal roof warranties are usually split into finish (film, chalk, fade), substrate and weathertightness coverage, and many exclude sites near saltwater (Sheffield Metals).
- Florida law lists the roof as a structural component a home warranty may cover (Fla. Stat. 634.301).
The three kinds of roof warranty
When a roofer says your new roof 'has a warranty,' ask which one. There are usually three, and they cover different things.
| Type | Who gives it | What it covers | What it usually doesn't |
|---|---|---|---|
| Standard manufacturer (material) warranty | The shingle, tile or metal maker | Manufacturing defects in the product | Installation mistakes, other components, storm damage, labor after the initial period, tear-off and disposal |
| Workmanship (installer) warranty | Your roofing contractor | Leaks and failures caused by installation errors | Product defects, storm damage, owner damage; worthless if the company closes |
| Extended system warranty | The manufacturer, sold through its certified contractors | Longer full coverage on listed system components, and on top tiers, installation errors | Typically flashing, wood decking and fasteners; storm damage |
Owens Corning, one of the largest shingle makers, describes the market exactly this way: a standard warranty covering products, a contractor's workmanship warranty covering installation, and an extended manufacturer warranty that covers contractor workmanship along with expanded product coverage. Owens Corning's buyer guide adds that standard manufacturer warranties 'commonly last between 10 and 30 years' in their full-coverage terms and that workmanship warranties 'often' run from 1 to 10 years, though some contractors offer longer.
The rest of this guide explains how each works and how to keep it valid.
What does a 'lifetime' roof warranty cover?
'Lifetime' rarely means the roof is covered for free forever. Two words in the warranty change its meaning: limited and prorated.
- Whose lifetime: Owens Corning says that for an owner of a single-family detached home, lifetime coverage means the warranty is in effect for manufacturing defects as long as you own your home. Coverage length is reduced for non-single-family or commercial buildings.
- What 'limited' means: Owens Corning says most manufacturer warranties strictly cover the cost of defective materials, so you pay for labor to remove failed shingles and install replacements, except during an initial full-coverage period.
- Proration: after the initial period, you receive only a portion of the cost, or fewer replacement shingles, based on the roof's age. Owens Corning's standard limited lifetime warranty is 'limited lifetime with coverage reduced after 25 years based on the age of the roof.'
The non-prorated period
Each brand names its full-coverage window differently. Owens Corning calls it the TRU PROtection period, during which coverage includes labor to repair or replace defective materials; the length depends on the warranty and shingle. CertainTeed's SureStart covers replacement costs for early-life defects, which it says is typically 10 years. IKO's Iron Clad period covers manufacturing defects for the first 15 years on its Performance products, extendable up to 25 years through certain certified contractors.
Even inside the full-coverage period, Owens Corning notes the standard warranty's labor coverage does not include tear-off and disposal of the defective shingles.
Bottom line: a 'lifetime' shingle with a 10-year full-coverage window is mostly a 10-year material warranty with a declining credit afterward.
Extended system warranties: is it worth paying more?
An extended warranty can be worth it if it adds what the standard warranty lacks: workmanship coverage that survives your roofer going out of business, and a longer non-prorated period that includes labor.
How they work (one example)
Owens Corning's extended warranties require:
- A minimum number of Owens Corning components. Its System Protection tier needs hip and ridge shingles plus two other accessories. Its Preferred and Platinum tiers need hip and ridge, underlayment and two other accessories.
- Installation by an Owens Corning Platinum or Preferred contractor (Platinum only for the top tier). Those contractors are authorized, but not obligated, to offer the extended warranty, so you must discuss it before installation.
Owens Corning says the most comprehensive extended warranties can include coverage for all roof system components (excluding flashing, wood decking and fasteners), non-prorated coverage for defective materials including labor, extendable up to 50 years, and workmanship coverage against installation errors that may be lifetime with prorating starting after a set number of years, including labor, tear-off and disposal.
When it's worth it
- You plan to stay in the home a long time.
- You worry the roofing company may not be around in 10 years.
- The upgrade cost is modest compared with the roof price, and the bid clearly includes the required components.
When it's less useful
- You'll sell soon and the transfer terms reduce coverage for the next owner.
- Your main risk is hail or hurricane damage, which warranties generally exclude (see below).
Wind warranties: the fine print that matters in Texas and Florida
Wind coverage is often the most valuable part of a shingle warranty in coastal Texas and Florida, and it has the strictest conditions.
- Owens Corning: its 160 mph wind coverage applies only when its component requirements are met and starter shingles are installed on both the eaves and the rakes.
- CertainTeed: standard wind ratings are 110 mph, upgrading to 130 mph when the right combination of starter shingles and hip and ridge accessories is used.
So the wind number in the brochure may not be the wind number on your roof. To keep the higher rating:
- Make sure the contract lists the manufacturer's starter on eaves and rakes, and the manufacturer's hip and ridge.
- Ask what nailing pattern the warranty requires (some high-wind warranties require more nails per shingle than the minimum), and put it in the contract. The model residential code requires at least 4 fasteners per strip shingle, or more if the manufacturer says so.
- Get photos of the starter rows and nailing before the next course covers them.
Don't confuse warranty wind ratings with product test classifications. Owens Corning notes that shingles on the market generally carry the same wind classifications (ASTM D3161 Class F and ASTM D7158 Class H), while the warranted wind speed differs by product and installation. If you want stronger wind performance, IBHS's FORTIFIED Roof standard requires Class F or Class H shingles plus a sealed deck, ring-shank nails, wider drip edge and adhered starter.
Metal roof warranties: finish, substrate and weathertightness
Metal roofs come with a different set of warranties than shingles. A metal roof can have three or four separate documents, and each covers something different. One metal supplier's guide (Sheffield Metals) breaks them down this way:
| Warranty | What it covers | Typical terms described |
|---|---|---|
| Finish film integrity | Paint cracking, flaking or peeling visible on ordinary outdoor observation | PVDF (Kynar-type) paints 20 to 40 years; SMP paints may advertise 40 years, but for film adhesion only; polyester generally no more than 20 |
| Chalk | The white, chalky residue left when paint resin breaks down, beyond a set rating | PVDF generally 10 to 30 years depending on color; SMP usually less |
| Fade | Color change beyond a measured limit (ASTM D2244 Delta E) | Darker and brighter colors fade faster; PVDF generally holds color longer |
| Substrate (perforation) | The base metal rusting through or failing structurally under normal exposure | Galvalume typically 15 to 25.5 years; aluminum about 20.5 years or less |
| Weathertightness | Leaks from material defects, weathering or installer workmanship, backed by the manufacturer and installer | Either capped at the original roof cost or "no dollar limit"; "side lap" versions cover only panel seams, not flashing |
The coastal fine print
This matters in Galveston, Corpus Christi, Miami, Tampa Bay and every barrier island. The same guide says Galvalume substrate warranties exclude constant salt spray and locations within 1,500 feet of a coastline with breaking surf, 800 feet of a large bay, or 400 feet of a marsh. Pre-painted aluminum within one mile of a seacoast requires an annual fresh-water rinse to keep coverage, and standard paint warranties may not apply within 1,500 feet of saltwater. Exact distances vary by manufacturer, so get the actual warranty and check your address before you choose a metal.
Florida's code is tightening here too: the 2026 Florida Building Code adds Section 1711, with corrosion-resistance requirements for fasteners, metal connectors and plates within 3,000 feet of a saltwater coastline. See the metal roof guide.
Ask for a weathertightness warranty that covers flashing
Sheffield notes that most metal roof leaks happen at flashing zones, not panel seams. A side-lap-only warranty leaves those areas out, so pair it with a written workmanship warranty that clearly covers flashing, trim and penetrations.
Commercial and low-slope roof warranties
Commercial roofs are often warranted differently from homes. Instead of a material-only limited warranty, building owners are usually offered weathertightness warranties backed by the manufacturer and installer. The terms to compare:
- Dollar cap: a limited warranty may cap repairs at the original material and installation cost. A no-dollar-limit (NDL) warranty pays the full repair cost even if it exceeds what the roof originally cost. In Sheffield's example, a $36,000 repair on a $30,000 roof is fully covered under an NDL warranty but capped at $30,000 under a limited one.
- Proration: some warranties make the owner share repair or replacement cost as the roof ages.
- What's covered: the membrane or panels only, or the whole system including insulation, flashing, edge metal and penetrations.
- Owner duties: commercial warranties can require you to notify the manufacturer of leaks, keep drains clear and get approval before other trades cut into the roof for rooftop units, solar or antennas. Read your document's maintenance and notice clauses.
- Storms: check whether your warranty states a maximum wind speed or excludes hail. As with homes, hurricane and hail losses are usually a property insurance matter. See commercial roof insurance claims.
Multifamily and commercial use also shortens many shingle warranties. Owens Corning reduces lifetime coverage length for non-single-family and commercial buildings, so an apartment owner or an HOA should read the warranty for that building type, not the homeowner version.
Does a roof warranty cover hail or wind damage from a storm?
Generally, no. Warranties cover defects. Storms are covered (or not) by your homeowners insurance.
Owens Corning's home buyer guide says damage caused by severe weather, fallen branches, poor ventilation, or lack of maintenance is commonly excluded from roof warranties. It also notes that insurance typically applies only to sudden damage, not normal wear and tear.
The exception is a wind warranty: if shingles blow off at wind speeds below the warranted limit and the roof was installed to the warranty's requirements, that may be a warranty claim. Above the limit, it's an insurance matter.
| What happened | Warranty | Insurance |
|---|---|---|
| Shingles cracked by hail | Usually excluded | Usually covered, subject to deductible and policy terms |
| Shingles blew off in a hurricane above the warranted wind speed | Excluded | Usually covered, subject to hurricane deductible |
| Shingles blew off in a moderate wind, below the warranted speed | Possible wind warranty claim if installed per requirements | Possibly covered; ask your insurer |
| Shingles blistering or curling early with no storm | Possible material defect claim | Usually excluded as wear or defect |
| Leak at flashing installed wrong | Workmanship warranty | Water damage may or may not be covered; the faulty work usually isn't |
For insurance questions, see roof and homeowners insurance basics and hail damage in Texas. Impact-resistant (UL 2218 Class 4) shingles may earn insurance discounts in Texas, but each insurer sets its own discount.
Roof warranty vs. home warranty vs. insurance
Three different products get called a "roof warranty," and people often confuse them.
| Product | Who sells it | What it is for |
|---|---|---|
| Roof warranty (manufacturer and workmanship) | The product maker and your roofer | Defective products and installation errors |
| Home warranty (Florida) or residential service contract (Texas) | A separate warranty company, often bought at a home sale | Repair or replacement of listed home systems and components from wear and tear or defects, subject to the contract's limits and exclusions |
| Homeowners insurance | Your insurer | Sudden damage from covered perils such as wind, hail and fire, subject to the deductible |
- Florida: Chapter 634, Part II defines a home warranty as an agreement to repair or replace a home's structural component or appliance after failure from wear and tear, an inherent defect or a missed inspection, and it lists the roof as a structural component (Fla. Stat. 634.301). Whether a particular plan actually covers your roof, and for how much, is in its terms, so read the roof section and the caps before buying.
- Texas: the TREC resale contract says buyers may buy a residential service contract from a provider or administrator licensed by the Texas Department of Licensing and Regulation, and tells buyers to review the contract's scope of coverage, exclusions and limitations.
None of these replaces insurance for storm damage, and a home warranty company won't honor your shingle maker's warranty for you. Keep all three documents in your roof file.
What voids a roof warranty?
Exact terms differ by brand, so read your warranty. These are the common ways coverage is lost or reduced, drawn from manufacturer guidance:
| Cause | Why it matters |
|---|---|
| Installation not per the manufacturer's instructions or local code | Owens Corning says standard warranties require proper installation instructions and local codes to be followed. |
| Missing required components | System and extended tiers require specific matching products; without them, standard component terms apply. |
| Wrong installer for the tier | Extended tiers require a certified contractor. |
| Improper attic ventilation | Owens Corning's buyer guide says improper ventilation can affect coverage or void certain warranties. |
| No registration | Extended warranties often must be registered within a set time. |
| Missed transfer deadline | Owens Corning requires the second owner to contact it within 60 days of the sale. |
| Damage from foot traffic, other trades or added equipment | Owens Corning notes improper foot traffic can void some tile and slate coverage; components like solar panels or skylights may not be covered unless listed. |
| Algae coverage conditions | Owens Corning's 25-year algae coverage requires its own hip and ridge products; without them it drops to 10 years with a 1-year non-prorated period. |
| Commercial or multifamily use | Lifetime terms are reduced for non-single-family structures. |
Does pressure washing void a roof warranty?
Pressure washing can strip the protective granules from asphalt shingles. Granule loss caused by cleaning is damage, not a manufacturing defect, so a material warranty would not be expected to pay for it. Before cleaning a shingle roof (common for algae streaks in humid Florida and Gulf Coast Texas), ask the manufacturer in writing what cleaning methods it allows.
Does installing solar void my roof warranty?
It can affect it. Solar installation adds penetrations and foot traffic, and Owens Corning's buyer guide notes components such as solar panels may not be covered unless specifically listed. Before going solar, ask the shingle manufacturer and your roofer how to keep the warranty, and ask the solar installer who warrants the roof penetrations. See roofs and solar panels.
How do I register a shingle warranty?
Registration proves when and what was installed, which speeds any future claim. For extended warranties, registration is often required and may be done by the contractor within a deadline.
Owens Corning says registering requires the installation date, shingle type, shingle color, and number of squares installed, and it offers online registration. IKO says its certified contractors register extended warranties for the owner.
Steps:
- Before final payment, ask the roofer who will register the warranty and when.
- Get the registration confirmation or certificate in your name.
- Keep a 'roof file': contract, final invoice, warranty documents, product names and colors, permit and final inspection, and photos of installation.
- If you don't get the registration within the stated time, contact the manufacturer directly.
Coverage is based on the warranty in effect when the shingles were installed. Owens Corning will send a copy of an older warranty if you give the month and year of installation.
Is my roof warranty transferable when I sell?
Sometimes. Owens Corning's buyer guide says manufacturer warranties are more likely to allow transfers than workmanship warranties, which often apply only to the original homeowner, and that transfers are rarely automatic.
One example of how a transfer works: Owens Corning requires the second owner to contact it within 60 days after the date of the real estate transfer, with proof of ownership (deed, closing documents or sales record), and some warranties require a transfer fee, which it says is upwards of $100 depending on the warranty terms. Some warranties limit how many times they can be transferred, so a later owner may not qualify; check your actual warranty.
Also ask whether coverage changes after transfer. Some warranties shorten the full-coverage period for the next owner.
If you're selling
- Gather the warranty documents, registration, invoice, permit and installer's information for buyers.
- Ask the manufacturer what the buyer must do and by when, and put it in your disclosure packet.
If you're buying
- Ask for the installation date, warranty documents and registration. Don't rely on verbal claims.
- Calendar the transfer deadline from your closing date.
- Get a roof inspection. In Florida, roof age also drives insurability; see buying a house with an old roof.
What if my roofer goes out of business?
Your workmanship warranty from that company is likely gone in practice, because the company that promised it no longer exists. Owens Corning's buyer guide notes that if the original installer is no longer in business, that coverage may be challenging to use.
Your manufacturer warranty still exists. A standard material warranty still covers product defects. If you bought an extended warranty that includes workmanship coverage, the manufacturer may cover installation errors even though the roofer is gone. Contact the manufacturer with your registration and invoice.
Other avenues:
- In Florida, if the roofer was licensed and you have a judgment for qualifying violations, the Homeowners' Construction Recovery Fund may help. See Florida license lookup and Recovery Fund.
- Check whether the company was bought or renamed; a successor may honor warranties.
- Ask an attorney whether the owners or the company's liability insurer can be reached.
Do roof repairs come with a warranty?
Usually only the roofer's. When a contractor fixes flashing, replaces a pipe boot or swaps out a few shingles, the manufacturer's system warranty generally doesn't apply to the repair, because system tiers are written for complete installations with matching components. That leaves the repair company's own promise.
- Get it in writing on the invoice: what was repaired, how long the repair is warranted, and what it covers (the repaired spot only, or leaks anywhere on that slope).
- Watch for exclusions such as "no warranty on roofs over 15 years old" or "no warranty on tile." Those can be fair, but you should know before you pay.
- Ask about the new materials. Replacement shingles still carry a material warranty against defects, but you'll need the product name and invoice to use it.
- Florida contract notices: residential contracts over $2,500 must include a notice of the Florida Homeowners' Construction Recovery Fund (Fla. Stat. 489.1425), and a contractor who takes more than 10% up front must apply for permits within 30 days and start work within 90 days after permits issue, unless you agree otherwise in writing (489.126).
- Partial replacements: ask whether the new section gets a full manufacturer warranty and how the tie-in to the old roof is warranted, since that joint is a common leak point. See repair or replace.
Your warranty paperwork and your insurance
The same papers that protect your warranty also help with insurance, especially in Florida.
- Roof age: Florida measures roof age for insurance from the last date 100% of the roof surface was replaced to the code then in effect (Fla. Stat. 627.7011). Your permit, final inspection and installation invoice prove that date.
- Citizens: for older roofs, Citizens Property Insurance accepts proof of replacement in the form of a licensed contractor's completed work plus a paid-in-full invoice.
- Wind mitigation credits: Florida insurers must offer discounts for wind-loss mitigation features such as roof covering performance and roof-deck attachment (Fla. Stat. 627.0629). Product names and approval numbers from your roof file feed the wind mitigation form.
- Texas impact-resistant credit: TDI Form PC068 records the UL 2218 class of an impact-resistant roof, and TWIA requires it for its credit. TDI notes the product must carry the testing lab's label and impact class to qualify.
- Insurance-paid roofs: a roof replaced through a claim carries the same manufacturer and workmanship warranties as any other. In Texas you must pay your own deductible (Ins. Code 707), and a contractor may not waive or rebate it (Bus. & Com. Code 27.02), so a warranty "upgrade" offered in exchange for skipping the deductible is a red flag.
How do I make a roof warranty claim?
- Figure out which warranty applies. Installation problem: contact the roofer under the workmanship warranty. Product problem: contact the manufacturer.
- Act quickly and in writing. Check your warranty for any deadline to report a problem after you discover it.
- Gather proof: proof of purchase (invoice or receipt), proof of ownership (deed or tax bill), installation date, and photos.
- Expect to send samples. Owens Corning asks for two full-size installed shingles from the affected area to identify when and where they were made and to test for defects, and warns you must replace removed shingles promptly to avoid leaks. IKO says it may require full shingles and at least seven clear color photos, and will reimburse homeowners up to $100 for a contractor to remove samples.
- Wait for a decision. Owens Corning says that once it has all required information, you should receive notification within 2 to 3 weeks.
- If denied, ask for the reason in writing and the warranty section relied on. If the denial blames installation, go back to the roofer's workmanship warranty.
What the law says: Texas and Florida
Neither state's statutes, in the sources we reviewed, set a specific minimum warranty term for residential reroofing. Warranty terms come from your contract and the manufacturer. But both states have laws that shape defect claims:
Florida
- Chapter 558: before suing over a construction defect, you must serve a written notice of claim at least 60 days before filing, and the contractor gets a chance to inspect and offer to repair or pay. 'Construction defect' includes defective materials, code violations, and failure to build to accepted trade standards for good and workmanlike construction.
- Code violations: anyone damaged by a material violation of the Florida Building Code can sue the person who committed it, with limits where the work was permitted, inspected and passed.
- Time limits: actions founded on construction of an improvement generally must be brought within 4 years, with a 7-year outer limit for latent defects.
Texas
- Chapter 27 (RCLA): covers defects in the repair or alteration of an existing residence. You must give written notice by certified mail at least 60 days before suing, and the contractor may inspect and make an offer. Your contract should contain a 10-point bold Chapter 27 notice.
- DTPA: deceptive-practice claims generally must be brought within 2 years, but Chapter 27 prevails where they conflict.
A written warranty can give you more than the law requires. Put the workmanship warranty, with its length and what it covers, directly into your contract. See bad roof job: your options and the contract checklist.
How to choose a provider
- Ask which warranties come with the roof: material, workmanship, extended system.
- Get the workmanship warranty in writing in the contract, with its length.
- Confirm the bid includes every component the chosen warranty tier requires.
- For wind coverage, confirm manufacturer starter on eaves and rakes and the required nailing.
- Confirm the installer is certified for the warranty tier.
- Get the registration confirmation in your name before or right after final payment.
- Keep a roof file: contract, invoice, warranty, product names, permit, photos.
- Ask the manufacturer before cleaning, adding solar, or adding rooftop equipment.
- When selling or buying, calendar the transfer deadline.
- For storm damage, file with your insurer, not the warranty.
- For metal roofs near the coast, check the warranty's saltwater distance exclusions for your address.
- Get every repair warranty in writing on the invoice.
Related roofing guides
- How to Compare Roofing Quotes Apples-to-Apples (With a Line-Item Checklist)
- How to Choose a Roofing Contractor: 30 Questions to Ask (and the Answers That Should Worry You)
- Bad Roof Job or Roofer Won't Finish: Your Options in Texas and Florida
- Does Homeowners Insurance Cover Roof Replacement? The Plain-English Answer for Texas and Florida
- Should You Replace the Roof Before Selling? Roof Disclosure Rules in Texas and Florida
- Buying a House With an Old Roof in Texas or Florida: How Do Inspection, Insurance and Negotiation Work?
- Solar and Your Roof: Should You Replace First, and What Does Removal Cost?
- Asphalt Shingle Roofs: Which Type, How Long They Last, and What Warranties Pay
- Metal Roofs: Standing Seam vs Exposed Fastener, Gauges, Coastal Metals, Costs and Myths
- Commercial Roof Insurance Claims After Hail or Hurricane
Roofing by state and city
Questions people ask
What is the difference between a manufacturer and workmanship warranty?
A manufacturer warranty covers defects in the roofing products themselves. A workmanship warranty is the contractor's promise to fix problems caused by how the roof was installed, such as flashing or nailing errors. Owens Corning notes standard manufacturer warranties don't cover failures caused by installation mistakes, so you usually need both, or an extended warranty that adds workmanship coverage.
Does a roof warranty cover hail or wind?
Generally not for storm damage. Manufacturer guidance says severe-weather damage is commonly excluded, and storm losses are an insurance matter. The exception is a wind warranty: if shingles blow off below the warranted wind speed and the roof was installed to the warranty's requirements, such as manufacturer starter on eaves and rakes, you may have a warranty claim.
How long is a roof warranty?
It varies. Many shingles carry a limited lifetime warranty for the original owner of a single-family home, but full coverage including labor usually lasts only for an initial period, after which coverage is prorated. CertainTeed says its early-defect period is typically 10 years, and IKO's Iron Clad period is 15 years on its Performance products.
Is an extended system warranty worth it?
It can be if you plan to stay for many years and want workmanship coverage that survives the roofer. These warranties require the manufacturer's matching components and a certified installer, which add cost. Compare the price difference with what the extended warranty adds, especially workmanship, labor and tear-off coverage, and make sure the bid includes every required part.
Is my roof warranty transferable when I sell?
Often the manufacturer warranty is, and the workmanship warranty often isn't. Transfers are rarely automatic. Owens Corning, for example, requires the new owner to contact it within 60 days of closing with proof of ownership, and some warranties carry a transfer fee. Check whether coverage is reduced after transfer and whether only one transfer is allowed.
What voids a roof warranty?
Common causes include installation that doesn't follow the manufacturer's instructions or code, missing required components, an uncertified installer for an extended tier, poor attic ventilation, failure to register, missed transfer deadlines, and damage from foot traffic or added equipment. Read your warranty's conditions and keep your installation records.
What if my roofer goes out of business?
The workmanship warranty from that company is usually hard or impossible to use. Your manufacturer warranty still covers product defects, and an extended manufacturer warranty that includes workmanship coverage may still cover installation errors. Contact the manufacturer with your registration and invoice, and check whether a successor company took over the business.
Does a metal roof warranty cover rust near the beach?
Often not fully. Metal substrate and paint warranties commonly exclude or limit coverage near saltwater. One supplier's guide lists Galvalume exclusions within 1,500 feet of breaking surf, 800 feet of a large bay and 400 feet of a marsh, and says pre-painted aluminum within a mile of the coast needs an annual fresh-water rinse. Check the actual warranty for your address before choosing a metal.
Does a home warranty cover my roof?
Sometimes, with limits. Florida law lists the roof as a structural component a home warranty can cover (Fla. Stat. 634.301), and Texas residential service contracts are sold by TDLR-licensed providers. Each plan sets its own coverage, caps and exclusions, so read the roof section before buying. A home warranty is not storm insurance and doesn't replace the manufacturer or workmanship warranty.
Do roof repairs come with a warranty?
Usually only the roofer's workmanship warranty, because manufacturer system warranties are written for complete installations. Ask for the repair warranty in writing on the invoice, including its length and whether it covers just the repaired spot. Keep the product names of any new shingles, since they still carry a material warranty against defects.
What is a no-dollar-limit roof warranty?
It is a weathertightness warranty, common on commercial and some metal roofs, that pays the full cost of covered leak repairs even if repairs cost more than the original roof. A limited warranty caps repairs at the original material and installation cost. Compare what each covers, such as flashing and insulation, and what maintenance and notice duties the owner must meet.
Sources
- Owens Corning, Understanding the 3 main types of roofing warranties
- Owens Corning, Roofing warranty information (registration, transfer, claims)
- Owens Corning, Home buyer's roofing warranty guide
- Owens Corning, Understanding asphalt shingle wind resistance
- CertainTeed, Residential roofing warranties
- IKO, Residential shingle warranty
- IBHS FORTIFIED Roof
- International Residential Code 2021, Chapter 9 (UpCodes)
- TDI, Roofing discounts
- Fla. Stat. 558.002, Definitions (2026)
- Fla. Stat. 558.004, Notice and opportunity to repair (2026)
- Fla. Stat. 553.84, Statutory civil action (2026)
- Fla. Stat. 95.11, Limitations (2026)
- Fla. Stat. 489.143, Recovery fund payments (2026)
- Tex. Prop. Code ch. 27, Residential construction liability
- Tex. Bus. & Com. Code ch. 17 (DTPA)
- Sheffield Metals: Metal roof warranty types
- Sheffield Metals: SMP vs. PVDF paint warranties for metal roofs
- Greenberg Traurig: New Florida Building Code edition takes effect Dec. 31, 2026
- Fla. Stat. 634.301 (2026): Home warranty definitions
- TREC One to Four Family Residential Contract (Resale), Form 20-18
- Fla. Stat. 489.1425 (2026): Recovery Fund notice
- Fla. Stat. 489.126 (2026): Moneys received by contractors
- Fla. Stat. 627.7011 (2026): Homeowners' policies; roof age
- Fla. Stat. 627.0629 (2026): Residential property insurance; rate filings
- Citizens: Required document updates and roof requirements (Jan. 2023)
- TDI Form PC068: Impact-Resistant Roofing Installation Form
- Tex. Ins. Code Ch. 707: Payment of deductibles
- Tex. Bus. & Com. Code Ch. 27
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


