New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Electricians

Workplace Electrical Safety for Small Businesses: OSHA Rules, Panels, Extension Cords and Inspections

A plain-English guide to the OSHA electrical rules a small Texas or Florida business is most likely to break: blocked panels, unlabeled breakers, extension cords, power strips, lockout/tagout, and who is allowed to do the work.

Most small-business electrical citations come from a few habits: storing things in front of electrical panels (OSHA requires at least 3 feet of clear working space for typical 120/240-volt panels), unlabeled breakers, extension cords used as permanent wiring, damaged cords, missing covers, and servicing machines without lockout/tagout. Fix those first. In Texas, regular maintenance staff may do some in-house work; in Florida, use a licensed electrical contractor.

Key facts

  • OSHA's preliminary FY 2026 top-ten list ranks lockout/tagout (29 CFR 1910.147) as the third most-cited standard.
  • OSHA Table S-1 requires at least 3 feet of clear working depth in front of equipment at 0-150 volts to ground, and up to 4 feet at 151-600 volts (1910.303(g)(1)).
  • Working space in front of electrical equipment may not be used for storage (1910.303(g)(1)(ii)).
  • Each circuit must be legibly marked at its breaker to show its purpose (1910.303(f)(2)).
  • Flexible cords may not substitute for the fixed wiring of a structure (1910.305(g)(1)(iv)(A)); holiday lighting may use temporary wiring for up to 90 days.
  • Extension cords and cord-connected equipment must be visually inspected before use on any shift (1910.334(a)(2)).
  • Texas exempts regularly employed business maintenance staff from electrician licensing for in-house work that is not new construction (Occ. Code 1305.003(a)(8)).
  • Florida's Fire Prevention Code adopts NFPA 1 and NFPA 101 and applies statewide; the State Fire Marshal updates it every 3 years (s. 633.202).
  • OSHA's penalties page (checked Nov. 2026) lists up to $16,550 per serious violation and $165,514 per willful or repeated violation.

Who this guide is for, and which rules apply to you

This guide is for owners and managers of offices, shops, restaurants, clinics, warehouses and small plants in Texas and Florida. You probably do not have a safety department. You may have one maintenance person, a landlord who handles the building, and an insurance carrier that sends a loss-control inspector once a year. You still have to follow the same federal workplace electrical rules as a large company.

Three layers of rules usually apply at the same time:

  • Federal OSHA rules protect your employees. For most private businesses this means 29 CFR Part 1910, Subpart S (Electrical), plus the lockout/tagout rule at 1910.147 and the fire extinguisher rule at 1910.157. Texas and Florida do not have OSHA-approved State Plans, so federal OSHA covers most private-sector workers in both states.
  • Building and fire codes protect the building and the public. In Texas, electrical installations follow the state-adopted National Electrical Code (the 2026 NEC since September 1, 2026) and local amendments. Florida uses the Florida Building Code (8th Edition, which references the 2020 NEC, until the 9th Edition takes effect) and the Florida Fire Prevention Code. Fire inspectors enforce the fire code.
  • State licensing law decides who may do electrical work. Texas Occupations Code Chapter 1305 and Florida Statutes Chapter 489, Part II, set the rules.

Your insurer adds a fourth layer. It is not law, but a carrier can require repairs as a condition of keeping your policy.

This page is general information, not legal advice. For a specific citation or an open inspection, talk to an employment or safety attorney, or call OSHA's free consultation program (see below).

What are the most common OSHA electrical violations?

OSHA publishes a list of the ten standards it cites most often each fiscal year. On the preliminary Fiscal Year 2026 list (October 1, 2025 to August 31, 2026), Control of Hazardous Energy (lockout/tagout), 29 CFR 1910.147, ranked third. The electrical wiring and equipment standards (1910.303 and 1910.305) did not appear in the FY 2026 top ten, but they are the rules a compliance officer applies whenever they walk past your electrical room, so they still matter.

In plain terms, the electrical problems an inspector or insurance surveyor looks for at a small business are usually these:

What the inspector seesThe rule behind itTypical fix
Boxes, pallets or supplies stacked in front of the breaker panel1910.303(g)(1): working space must be kept clear and "may not be used for storage"Clear and mark a 3-foot zone in front of the panel
Breakers with no labels or labels that say "spare" for a live circuit1910.303(f)(2): each circuit must be legibly marked to show its purposeTrace circuits and write a durable directory
Extension cords running a refrigerator, a printer station or a sign for months1910.305(g)(1)(iv)(A): flexible cords may not substitute for fixed wiringHave an electrician add outlets
Cords through walls, ceilings, doorways or stapled to walls1910.305(g)(1)(iv)(B)-(D)Reroute or install permanent wiring
Missing cover plates, open knockouts, uncovered junction boxes1910.305(b)(2): every outlet box needs a cover, faceplate or canopy; 1910.303(g)(2): live parts at 50 volts or more must be guardedInstall covers and blanks
Damaged cords with cut jackets or missing ground pins still in use1910.334(a)(2): inspect before use and remove damaged items from serviceTag out and discard
Equipment used against its label, such as an indoor-only cord outside1910.303(b)(2): listed or labeled equipment must be used per its listing instructionsUse cords and devices rated for the location
No GFCI on 125-volt receptacles in restrooms or on the roof1910.304(b)(3)(i)Add GFCI protection
Maintenance staff working inside a live panel without training or PPE1910.332 (training), 1910.333 (work practices), 1910.335 (protective equipment)De-energize, train, or hire a licensed electrician

OSHA penalties are adjusted for inflation each year. When we checked OSHA's penalties page in November 2026, it listed maximums of $16,550 per serious or other-than-serious violation, $16,550 per day for failure to abate, and $165,514 per willful or repeated violation. Check the page for the current figures, since the table is updated annually.

How much clearance is required in front of an electrical panel?

For most small businesses the answer is at least 3 feet (36 inches) of clear space in front of the panel, at least 30 inches wide (or the width of the equipment if wider), and clear from the floor up to at least 6.5 feet for installations built on or after August 13, 2007 (6.25 feet for older ones). That comes from OSHA's Table S-1 in 29 CFR 1910.303(g)(1).

The depth depends on voltage and what is behind you:

Nominal voltage to groundCondition ACondition BCondition C
0 to 150 volts (most 120/240 V and 120/208 V panels)3 ft3 ft3 ft
151 to 600 volts (for example, 277/480 V equipment)3 ft3.5 ft4 ft

In simple terms, Condition A means nothing live or grounded faces you across the space, Condition B means exposed live parts are on one side and grounded parts are on the other, and Condition C means exposed live parts are on both sides. If you have 480-volt equipment in a warehouse, ask your electrician which condition applies.

Other parts of the same rule that catch businesses:

  • The space must allow equipment doors or hinged panels to open at least 90 degrees.
  • Working space "may not be used for storage." A rolling cart parked there counts.
  • Indoor working space around service equipment, switchboards and panelboards needs lighting, and in electrical rooms the lighting may not be controlled by automatic means only.
  • Equipment above or below the panel may stick out no more than 6 inches past the front.

The National Electrical Code has a parallel working-space rule (Section 110.26) that your electrician and building inspector apply when equipment is installed or changed. If OSHA and the code ever seem to disagree on a detail, follow the stricter one and ask your electrician to explain.

Practical step: paint or tape a 36-inch by 30-inch box on the floor in front of each panel and tell staff nothing goes inside it, ever.

Do I need to label my breaker panel?

Yes. OSHA 1910.303(f)(2) says each service, feeder and branch circuit must be "legibly marked to indicate its purpose" at its disconnect or breaker, unless the purpose is evident from how it is arranged. The marking must be durable enough for the environment. Disconnects for motors and appliances must be marked too (1910.303(f)(1)), and required disconnects must be capable of being locked in the open position (1910.303(f)(4)).

A good business panel directory:

  • Names the specific load, not just the room: "Walk-in cooler compressor" beats "Back."
  • Uses the room names staff actually use, and matches door signs.
  • Is typed or printed, not pencil that fades in a hot Texas or Florida mechanical room.
  • Shows which panel feeds which sub-panel, with the panel's own name on its door.
  • Gets updated every time an electrician adds or moves a circuit. Make it part of the job's closeout.

If you lease, your landlord may own the panel, but OSHA holds the employer responsible for hazards its employees are exposed to. Ask the landlord in writing to label it, or get written permission for your electrician to do it.

Are extension cords allowed as permanent wiring at work?

No. OSHA 1910.305(g)(1)(iv)(A) says flexible cords and cables may not be used as a substitute for the fixed wiring of a structure. The same paragraph also bars cords run through holes in walls, ceilings or floors; through doorways, windows or similar openings; attached to building surfaces; concealed behind walls, ceilings or floors; or installed in raceways (except where the rule allows).

Cords are allowed for listed uses such as connecting portable lamps or appliances, and for temporary wiring. OSHA allows temporary power and lighting during remodeling, maintenance or repair, during emergencies and testing, and for up to 90 days for holiday decorative lighting and similar purposes. Temporary wiring must be removed as soon as the project or purpose is done (1910.305(a)(2)).

So how long is too long? OSHA does not give a fixed number of days for ordinary cord use. The test is the purpose. A cord that has powered the same copier for a year is acting as fixed wiring. A cord used for an afternoon to run a floor buffer is a portable connection.

CPSC's consumer guidance says the same thing in plain words: extension cords should only be used temporarily, should not run under carpets, through doorways or under furniture, and should be at least 16 AWG unless they are 18 AWG with fuse protection. Look for a mark from a recognized testing laboratory such as UL, ETL (Intertek) or CSA.

Cords at work also have an inspection rule. Under 1910.334(a)(2), portable cord-and-plug equipment and extension cords must be visually inspected before use on any shift for loose parts, deformed or missing pins, and damaged insulation. Cords that stay plugged in and are not exposed to damage need not be inspected until they are moved. Damaged cords must be removed from service until repaired and tested.

Is daisy-chaining power strips an OSHA violation?

Plugging one power strip into another, or a power strip into an extension cord, is a common citation theme. The specific section depends on the facts, so here is how inspectors usually reason:

  • Listing and labeling. 1910.303(b)(2) requires listed or labeled equipment to be used according to its listing instructions. Relocatable power taps (power strips) are generally labeled for direct connection to a permanently installed receptacle, not to another strip or cord. Read the label on yours.
  • Substitute for fixed wiring. A chain of strips feeding a workstation for months is acting as fixed wiring (1910.305(g)(1)(iv)(A)).
  • Overload. Conductors and equipment must be protected from overcurrent according to their ability to carry current (1910.304(f)(1)(i)). A chain lets you plug more load into one cord than it is rated for.

The fix is almost always cheaper than it looks: add outlets where people actually work. Space heaters, refrigerators, microwaves and coffee makers should plug straight into a wall outlet, never a strip.

What is lockout/tagout, and does my business need it?

Lockout/tagout (LOTO) is OSHA's rule for stopping machines from starting up, or releasing stored energy, while someone is servicing or maintaining them. The standard is 29 CFR 1910.147. It covers electrical energy and also mechanical, hydraulic, pneumatic, chemical and thermal energy.

You likely need a LOTO program if anyone on your staff cleans, unjams, adjusts or repairs equipment such as conveyors, compactors, balers, mixers, slicers, commercial HVAC units, packaging lines or production machinery where an unexpected start could injure them.

You may not need the full program for work on cord-and-plug equipment when the hazard is controlled by unplugging it and the plug stays under the exclusive control of the person doing the work (1910.147(a)(2)(iii)(A)). Construction and agriculture employment are covered by other rules. Normal production operations are covered only when a worker must remove or bypass a guard or put part of the body into the danger zone.

What 1910.147 requires, in short:

  1. A written energy control program with procedures, employee training and periodic inspections (1910.147(c)(1)).
  2. Lockout where possible. If an energy-isolating device can accept a lock, you must use lockout unless you can show tagout gives equal protection (1910.147(c)(2)).
  3. A set sequence: prepare for shutdown, shut down, isolate, apply locks or tags, release stored energy, then verify isolation before work starts (1910.147(d)).
  4. Training for "authorized" employees (who apply locks), "affected" employees (who run the machine) and everyone else who works nearby (1910.147(c)(7)).
  5. An annual inspection of each procedure by an authorized employee other than the ones using it (1910.147(c)(6)).

Separate electrical work-practice rules (1910.333) say live parts must be de-energized before an employee works on or near them, unless de-energizing creates a greater hazard (for example, shutting off life support or emergency alarms) or is infeasible because of equipment design. Parts under 50 volts to ground need not be de-energized if there is no increased burn or arc hazard.

A small shop can start with a lock and tag for each authorized employee, one written procedure per machine with photos of each disconnect, and a short annual check. Free help is available: Texas employers can request a free safety consultation through the Texas Department of Insurance, Division of Workers' Compensation (OSHCON program), and OSHA's On-Site Consultation Program is free, confidential, separate from enforcement and available in all 50 states.

Who can do electrical work in my business: maintenance staff or a licensed electrician?

This is where Texas and Florida differ, and where many businesses guess wrong.

Texas

Texas requires a state license for electrical work unless an exemption applies (Occupations Code Sec. 1305.151). One exemption fits many businesses: Sec. 1305.003(a)(8) exempts electrical work performed by a person who (A) does not do electrical work for the public, (B) is regularly employed as a maintenance person or maintenance electrician for a business, and (C) is not installing electrical equipment during new construction (as defined in Texas tax rules).

So your full-time maintenance employee can usually replace a failed receptacle, a ballast or a motor of the same type in your own building. That employee cannot freelance for other businesses, and cannot wire a tenant finish-out or a new addition under that exemption. TDLR also issues a maintenance electrician license (8,000 hours of on-the-job training under a master or maintenance electrician, plus an exam) for people performing electrical maintenance under the general supervision of a master electrician. Licensed electricians in Texas must complete 4 hours of continuing education per renewal, and TDLR lists electrical safety under NFPA 70E as one of the required topic areas.

Exemptions do not override your city. Work inside city limits must also follow local ordinances, and work requiring a permit in Houston must be performed by a licensed electrical contractor and inspected by the city.

Florida

Florida's electrical contracting law (Chapter 489, Part II) has no general exemption for a business's own maintenance staff like Texas's 1305.003(a)(8). The exemptions in s. 489.503 cover specific groups, such as employees of a licensed contractor working within that license, public utilities, telecommunications and cable providers for their own systems, and government employees for routine maintenance under a dollar cap. Florida does let a business license itself to work only on its own equipment: under s. 489.5315, a business that obtains an electrical license to work only on its own equipment and does not offer contracting to the public is not an electrical contracting business for business-tax purposes.

In practice, Florida businesses should use a certified (EC) or registered (ER) electrical contractor for anything beyond plugging in equipment or changing lamps, and should ask the local building department before letting staff touch wiring. Pulling permits matters: s. 489.533 lists proceeding without required permits and inspections as grounds for discipline against contractors.

For a fuller comparison, see Texas electrician licensing and Florida electrical contractor licensing.

Do I need arc flash labels? NFPA 70E in plain English

"Arc flash" is the explosive burst of heat and light when current jumps through the air between conductors, often when someone drops a tool in a live panel. OSHA does not use the phrase "arc flash label" in Subpart S, but it does require employers to protect workers from electric arcs: 1910.335(a)(1)(v) requires eye and face protection wherever there is danger from electric arcs or flashes, and 1910.335(b) requires safety signs and tags where needed to warn employees about electrical hazards.

The detailed method most employers use is NFPA 70E, Standard for Electrical Safety in the Workplace, a consensus standard published by the National Fire Protection Association. It sets out how to do a shock and arc flash risk assessment, how to create an electrically safe work condition (the verified-dead state LOTO aims for), how to choose protective equipment, and how to label equipment. Whether a given panel needs a field-applied warning label is set by the NEC edition your city enforces and by NFPA 70E, so ask your electrician or electrical engineer for a written recommendation.

For most small offices and stores, the practical policy is simple: no one except a qualified electrician opens a live panel. OSHA defines training levels: "qualified persons" are those permitted to work on or near exposed energized parts and must be trained to tell live parts from other parts, to determine voltage, and to keep proper approach distances (1910.332(b)(3)). If you have a production facility with large switchgear, budget for an arc flash study by an engineer and for 70E training for your maintenance team.

What does a fire marshal check electrically?

Fire inspections for existing businesses are mostly done by your city or county fire marshal, under a locally adopted fire code in Texas or under the statewide Florida Fire Prevention Code in Florida.

Texas

Texas cities adopt their own fire codes. Austin, for example, lists the 2024 International Fire Code in its building technical codes table. The Texas State Fire Marshal's Office (part of the Texas Department of Insurance) investigates fires with local authorities, runs a fire investigations division, licenses fire protection companies, and takes requests to report safety violations or ask for an inspection. Call your city fire marshal first for a routine business inspection.

Florida

Under s. 633.202, Florida Statutes, the State Fire Marshal adopts the Florida Fire Prevention Code, which incorporates NFPA 1 (Fire Code) and NFPA 101 (Life Safety Code), updates it every 3 years, and the code applies statewide without local adoption. The Division of State Fire Marshal in the Department of Financial Services does fire and life safety inspections and plans review on state-owned buildings, regulates the fire sprinkler industry and certifies fire suppression workers. Local fire officials inspect private businesses.

The electrical items inspectors commonly write up

  • Blocked electrical panels and electrical rooms used as storage closets
  • Extension cords used as permanent wiring, or run through doors and walls
  • Daisy-chained power strips and overloaded multi-plug adapters
  • Missing breaker blanks, cover plates or junction box covers
  • Exit signs and emergency lights that do not work on battery test
  • Unlabeled disconnects and electrical room doors
  • Fire extinguishers that are missing, blocked, out of date or the wrong type

For extinguishers, OSHA 1910.157 requires a visual inspection of portable extinguishers every month and an annual maintenance check, with the annual date recorded and kept. If you provide extinguishers for employees to use, you must train them on general extinguisher use when hired and at least yearly. For energized electrical equipment, the extinguisher must carry a Class C rating; USFA notes that Class C extinguishers use an agent that does not conduct electricity, and that multipurpose "A-B-C" units cover most fires in homes and offices.

How do I prepare for an insurance loss-control electrical inspection?

Commercial insurers often send a loss-control surveyor after you buy a policy or at renewal. The surveyor is not a government inspector, but a list of "recommendations" can become conditions of coverage. Florida's Citizens Property Insurance, for example, says it may require exterior or interior surveys during the life of a policy at no cost to the policyholder, and may require the owner to repair hazards or deficiencies.

Two weeks before the visit:

  1. Walk every panel. Clear the 36-inch zone, close the doors, fill empty breaker slots with blanks.
  2. Print and post a current circuit directory in each panel.
  3. Pull every extension cord that is doing a permanent job and schedule an electrician to add outlets.
  4. Check for warm or discolored outlets, buzzing panels, scorch marks and burning smells. Those are repair items, not survey prep. Call an electrician now.
  5. Gather records: recent electrical permits and inspection sign-offs, any infrared (thermographic) scan of panels, extinguisher tags, emergency lighting tests, and your LOTO program if you have machinery.
  6. If the building has an older panel brand the surveyor may question, get a written evaluation from a licensed electrician before the visit rather than after.

After the visit, ask for the report in writing, note each recommendation's deadline, and keep invoices showing what was fixed. If a recommendation seems wrong, ask the carrier what standard it is based on.

Texas vs Florida at a glance

TopicTexasFlorida
Workplace electrical safetyFederal OSHA (29 CFR 1910 Subpart S)Federal OSHA (29 CFR 1910 Subpart S)
Electrical code for installations2026 NEC statewide since Sept. 1, 2026 (16 TAC 73.100), plus local amendmentsFlorida Building Code 8th Ed. (2020 NEC); 9th Ed. (2023 NEC) effective Dec. 31, 2026 per the state, Jan. 1, 2027 per Tampa's notice
Fire code for existing businessesLocally adopted (for example, Austin: 2024 IFC)Statewide Florida Fire Prevention Code (NFPA 1 and NFPA 101)
State fire agencyState Fire Marshal's Office, Texas Department of InsuranceDivision of State Fire Marshal, Department of Financial Services
In-house maintenance exemptionYes, Occ. Code 1305.003(a)(8), not for new construction or the publicNo general exemption; use a licensed contractor or a proprietary license (s. 489.5315)
Licensing agencyTDLRDBPR, Electrical Contractors' Licensing Board

How to choose a provider

  • Mark a clear 36-inch by 30-inch zone in front of every panel and keep it empty.
  • Close panel doors and fill empty breaker slots with listed blanks.
  • Write a typed circuit directory for each panel and update it after every electrical job.
  • Remove extension cords doing permanent jobs and have outlets added.
  • Ban daisy-chained power strips; plug heaters, refrigerators and microwaves directly into wall outlets.
  • Inspect cords before each shift and discard damaged ones.
  • Install cover plates and junction box covers wherever they are missing.
  • Test GFCI outlets monthly and confirm restroom and rooftop receptacles are protected.
  • Write lockout/tagout procedures for any machine staff service, train employees and inspect yearly.
  • Inspect fire extinguishers monthly, service them annually and train staff who are expected to use them.
  • Confirm who may do electrical work: Texas in-house maintenance limits, Florida licensed contractor.
  • Keep permits, inspection sign-offs and electrician invoices in one file for insurers and fire inspectors.

Related electricians guides

Electricians by state and city

Questions people ask

Can OSHA fine a small business with only a few employees?

Yes. Federal OSHA's general industry rules, including the electrical standards in Subpart S, apply to private employers regardless of size, although some recordkeeping rules have small-employer exemptions. OSHA's November 2026 penalties page listed maximums of $16,550 per serious violation and $165,514 per willful or repeated violation. Small businesses can ask for a free, confidential on-site consultation, which is separate from enforcement. In Texas, the Department of Insurance also offers free workplace safety consultations to employers.

Is it OK to store things in the electrical room?

Not in the working space. OSHA 1910.303(g)(1)(ii) says the required working space in front of electrical equipment may not be used for storage. You may store items elsewhere in a large room if the clear zone in front of each panel stays open, but fire inspectors often object to combustible storage in electrical rooms. The safest policy is to keep electrical rooms for electrical equipment only and to keep the door closed and labeled.

Do power strips with surge protection count as permanent wiring?

A surge protector is still a cord-connected device. It is fine to power computers and electronics at a desk if it plugs directly into a wall outlet, is used as its label says and is not overloaded. Using strips to power a workstation for months because there are not enough outlets is the pattern OSHA treats as a substitute for fixed wiring under 1910.305(g)(1)(iv). The lasting fix is more outlets.

How often should a business have its electrical system inspected?

No federal rule sets a fixed interval for general electrical inspections of a small business. Many owners use an annual walkthrough by a licensed electrician plus an infrared scan of main panels, timed before their insurance renewal. Inspect cords before each shift as 1910.334 requires, test GFCIs monthly, check extinguishers monthly as 1910.157 requires, and inspect each lockout procedure at least annually as 1910.147 requires.

Do I need GFCI outlets in my office break room?

OSHA's rule at 1910.304(b)(3)(i) specifically requires GFCI protection for 125-volt, 15- and 20-amp receptacles in bathrooms and on rooftops. The electrical code that applied when your building was wired or remodeled may require GFCI in more places, such as near sinks and in kitchens. If your break room sink outlets are not GFCI protected, ask an electrician to check what your city's adopted code requires and add protection.

Can my landlord be responsible for electrical hazards in my space?

Often the landlord owns and must maintain the building wiring under the lease, but OSHA cites the employer whose employees are exposed to the hazard. That means you can be cited for a blocked or unlabeled panel even if the landlord owns it. Report hazards to the landlord in writing, keep a copy, and fix what you control, such as storage, cords and labeling, right away.

Who enforces electrical safety rules at a restaurant?

Several agencies overlap. Federal OSHA protects your employees. Your city or county building department enforces the electrical code when work is permitted. The local fire marshal checks panels, cords, exit lighting and extinguishers during fire inspections. Health inspectors focus on food safety but may note obvious hazards. Your insurer may also survey the kitchen. Each one can require fixes, so keep panels clear and cords off the floor.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration