Local Guide · Electricians
How Much Do Electricians Charge in Texas and Florida? Wages, Service Calls and Job Prices
Real, dated numbers only: BLS May 2025 electrician wages for Texas, Florida and eight metros, LBNL's August 2026 job cost survey, copper price trends, and how service fees, flat rates and permits shape your bill.
Electrician labor costs are similar in Texas and Florida. BLS May 2025 data put the mean electrician wage at $28.50 an hour in Texas and $27.72 in Florida; billed rates are higher because they cover insurance, licensing, trucks and warranty. For larger jobs, LBNL's August 2026 survey found a $3,500 national median for a main panel replacement and $1,500 for a subpanel. Always get written, itemized quotes.
Key facts
- BLS OEWS May 2025: Texas electricians earned a mean $28.50 an hour and median $58,570 a year; Florida a mean $27.72 an hour and median $57,250.
- BLS OEWS May 2025: the U.S. mean electrician wage was $34.37 an hour, above both states.
- BLS May 2025 median hourly wages: Austin $29.03, Houston $28.45, Dallas-Fort Worth $28.37, Miami $28.19, Jacksonville $28.02, Tampa $27.62, San Antonio $27.41, Orlando $24.43.
- LBNL (Aug. 2026): median single-family main panel replacement $3,500 (middle half $2,100 to $5,000).
- LBNL (Aug. 2026): median subpanel replacement $1,500; median rewiring $5,000 per home.
- LBNL for ENERGY STAR (2023): typical new circuit $250 to $750.
- BLS PPI for nonferrous wire and cable rose about 20 percent from October 2025 to October 2026 (preliminary).
- Texas cities may not charge state-licensed electricians registration fees but may charge building permit fees (Occ. Code 1305.201(f)).
- Disaster price gouging is a deceptive practice in Texas (DTPA 17.46(b)(27)) and unlawful in Florida during a declared emergency (s. 501.160).
What this guide uses, and what it refuses to guess
Most "electrician cost" pages online publish national averages drawn from their own lead-generation data, without dates or methods. We do not. Every number below comes from a named public source with a date:
- Wages from the U.S. Bureau of Labor Statistics (BLS) Occupational Employment and Wage Statistics (OEWS), May 2025 estimates for electricians (occupation code 47-2111), for Texas, Florida and eight metro areas.
- Job costs from the Lawrence Berkeley National Laboratory (LBNL), which published a survey of building professionals on panel, service and wiring costs in August 2026, and an earlier LBNL presentation for ENERGY STAR (2023).
- Material price trends from the BLS Producer Price Index for nonferrous wire and cable.
We could not find a dated, public, Texas- or Florida-specific study of what electricians bill per hour, or of prices for small jobs like adding an outlet. So we explain how those prices are built and what to ask, instead of printing a made-up range. If you see a precise "average cost to add an outlet in Houston" elsewhere, ask where it came from.
How much do electricians earn in Texas and Florida?
The BLS wage is what an electrician employee is paid, before the employer adds overhead and profit. It is the floor under any billed rate, and it is the best public measure of local labor cost.
| Area (May 2025) | Electricians employed | Mean hourly wage | Mean annual wage | Median annual wage |
|---|---|---|---|---|
| United States | 757,220 | $34.37 | $71,490 | $63,190 |
| Texas | 76,770 | $28.50 | $59,280 | $58,570 |
| Florida | 49,700 | $27.72 | $57,660 | $57,250 |
So electricians in both states earn less on average than the national figure, and Texas pay runs slightly above Florida pay. That gap is small, under a dollar an hour on the mean.
Electrician wages in Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando and Jacksonville
| Metro area (BLS OEWS, May 2025) | Employed | Mean hourly | Median hourly | 10th percentile hourly | 90th percentile hourly | Median annual |
|---|---|---|---|---|---|---|
| Houston-Pasadena-The Woodlands | 19,730 | $29.55 | $28.45 | $18.66 | $40.61 | $59,180 |
| Dallas-Fort Worth-Arlington | 20,930 | $28.83 | $28.37 | $18.63 | $39.26 | $59,010 |
| San Antonio-New Braunfels | 6,660 | $27.42 | $27.41 | $18.01 | $36.38 | $57,010 |
| Austin-Round Rock-San Marcos | 7,340 | $29.25 | $29.03 | $18.87 | $37.90 | $60,390 |
| Miami-Fort Lauderdale-West Palm Beach | 12,990 | $28.81 | $28.19 | $18.44 | $38.86 | $58,630 |
| Tampa-St. Petersburg-Clearwater | 7,170 | $27.89 | $27.62 | $18.73 | $36.87 | $57,450 |
| Orlando-Kissimmee-Sanford | 6,970 | $26.59 | $24.43 | $18.18 | $35.84 | $50,820 |
| Jacksonville | 4,990 | $27.81 | $28.02 | $18.31 | $37.12 | $58,280 |
What this tells a customer:
- Labor cost is similar across the big Texas and Florida metros. Median hourly pay ranges from about $24 (Orlando) to about $29 (Austin). Big price differences between quotes in the same city are rarely about local wages.
- The spread inside each city is wide. In Houston, the 10th percentile earns $18.66 an hour and the 90th percentile $40.61. The person at the top of that range is usually a senior journeyman, a master or a foreman. You pay for that experience on complex jobs like service changes, generators and troubleshooting.
- Orlando is the outlier, with the lowest median in this group.
For city-specific permit offices and utilities, see our guides for Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando and Jacksonville.
How much does an electrician charge per hour?
The hourly rate you are billed is always higher than the wage above, because the contractor pays for much more than the electrician's time. Here is what goes into a billed hour:
| Cost the contractor carries | Why it exists |
|---|---|
| Wage plus payroll taxes and benefits | The BLS wage is only the starting point. |
| Licensing and supervision | Texas electrical contractors must be or employ a master electrician (Occ. Code 1305.159). Florida businesses need a licensed qualifying agent. |
| Liability insurance | TDLR requires at least $300,000 per occurrence, $600,000 aggregate and $300,000 completed operations for electrical contractors. |
| Workers' compensation | Required in Florida (or a DBPR exemption); Texas contractors carry it or formally elect out. |
| Truck, fuel, tools and stocked parts | Every service call needs a stocked vehicle. |
| Non-billable time | Driving, supply house runs, permit applications, waiting for inspectors, callbacks. |
| Warranty reserve and profit | Paying for return trips under warranty. |
Because we found no dated, public study of billed electrician rates in Texas or Florida, we will not print a range. Instead, use these rules of thumb that hold everywhere:
- Ask whether the rate is per hour or per job, and whether there is a minimum.
- Ask whether the first hour includes the trip and diagnosis.
- Ask if a helper or apprentice is billed separately, and at what rate.
- Ask if materials are billed at cost or marked up.
- Compare two or three companies for the same task. That is the only real benchmark for your city this month.
Service call fees, trip charges and minimums
A service call fee (also called a trip charge or diagnostic fee) covers sending a licensed electrician and stocked truck to your address and finding the problem. It is normal, especially for troubleshooting like a breaker that keeps tripping or half the house losing power. Some companies credit the fee toward the repair if you approve the work.
A minimum charge means the smallest bill you can get, often equal to one hour or one flat-rate task, even if the fix takes ten minutes.
Questions to ask on the phone before anyone comes:
- What is the service call fee, and what does it include?
- Is it credited toward the repair?
- Is there a separate after-hours, weekend or holiday rate?
- Will you give me a written price before starting the repair?
Texas law even recognizes trip charges in one setting: if a Texas tenant lawfully hires a repair person under the repair-and-deduct law and the landlord fixes the problem before work starts, the landlord owes the tenant the repairman's trip charge (Property Code 92.0561(k)). See landlord and tenant electrical rights.
Why do electricians charge flat rate instead of hourly?
Many residential electrical companies now quote from a flat-rate price book: a menu of tasks (replace a breaker, install a ceiling fan on an existing box, add a GFCI receptacle) with a set price, regardless of how long it takes.
| Flat rate | Time and materials (hourly) | |
|---|---|---|
| You know the price before work starts | Yes | Only an estimate |
| Risk if the job takes longer | Contractor carries it | You carry it |
| Risk if the job is quick | You may pay more than the time used | You pay less |
| Best for | Common, repeatable tasks | Troubleshooting with unknown causes, old houses, custom work |
Neither method is a scam. The question is whether the price is clear in writing before work starts, and whether the scope matches what you need. Ask a flat-rate company to show you the line item and what it includes (permit? patching? haul-away?). Ask an hourly company for a not-to-exceed amount.
What do common electrical jobs cost? Dated figures we could verify
LBNL's August 2026 survey asked building professionals what single-family panel, service and wiring work cost. These are national figures from small samples, not Texas or Florida prices, so treat them as a reality check rather than a quote.
| Job (single-family home) | Median cost | Middle 50% of responses | Source |
|---|---|---|---|
| Main service panel replacement | $3,500 | $2,100 to $5,000 (mean $3,931; 34 responses) | LBNL, Aug. 2026 |
| Subpanel replacement | $1,500 | $775 to $2,500 (31 responses) | LBNL, Aug. 2026 |
| Service rating increase, customer-side equipment | $2,800 | $2,000 to $5,000 (22 responses) | LBNL, Aug. 2026 |
| Service rating increase, utility-side costs passed to customer | $3,500 | $1,650 to $7,000 (19 responses) | LBNL, Aug. 2026 |
| Rewiring hazardous or undersized conductors | $5,000 per home | $1,000 to $7,500 (mean $7,021; 21 responses) | LBNL, Aug. 2026 |
| New circuit | $250 to $750 typical range | Not given | LBNL for ENERGY STAR, 2023 |
| Panel | $1,000 to $5,000 typical range | Not given | LBNL for ENERGY STAR, 2023 |
| Service upgrade | $1,000 to $25,000 to the homeowner, plus a similar amount for the utility | Not given | LBNL for ENERGY STAR, 2023 |
Respondents told LBNL most single-family panel and service projects were completed within 30 days, and projects that increased the service rating took longer. Full rewiring of a large older home can exceed the LBNL median. For context on each job, see panel upgrades, rewiring costs and subpanels.
How much does it cost to add an outlet, install a light fixture or run a 240-volt line?
We found no dated public study that prices these small jobs for Texas or Florida, so here is how to get a fair price and what changes it.
Adding an outlet
- Cheapest case: extending an existing circuit with room to spare, through an accessible attic or crawlspace, with no wall repair.
- Costs more when: walls are plaster or finished on both sides, the circuit is full, the location needs GFCI or AFCI protection, or the outlet is outdoors. Under the NEC adopted in both states, kitchens, bathrooms, garages, outdoors and other wet or damp areas need GFCI protection, and many living areas need AFCI protection when circuits are extended. Those devices cost more than a basic receptacle.
- A new dedicated circuit back to the panel is a bigger job. LBNL's 2023 range for a new circuit was $250 to $750.
Installing a light fixture
- Replacing a fixture on an existing, properly supported box is a common flat-rate item.
- Costs more for a ceiling fan (the box must be rated for fan support), high ceilings, new switch locations, or adding a box where none exists.
Running a 240-volt line (dryer, range, EV charger, AC, shop tool)
- This is a new dedicated circuit with a two-pole breaker. The cost depends on distance from the panel, wire size (larger for higher amps), conduit outdoors, and whether your panel has space and capacity.
- If the panel is full or the service is too small, the job can grow into a panel or service upgrade. The DOE Alternative Fuels Data Center notes Level 2 EV charging uses 240 volts and installations may need permits. See EV charger installation and dedicated appliance circuits.
Tip: bundle small jobs into one visit. You pay one trip charge instead of three.
How much more do emergency electricians charge?
Expect a higher service call fee and higher hourly or flat rates for nights, weekends, holidays and storm recovery. That premium pays for on-call staff and overtime wages. Neither Texas nor Florida caps emergency electrical rates in normal times.
During a declared disaster, though, both states police excessive pricing:
- Texas: the DTPA lists taking advantage of a disaster declared by the governor or the president by charging exorbitant or excessive prices for necessities, including building materials and construction tools, as a deceptive practice (Bus. and Com. Code 17.46(b)(27)).
- Florida: once the Governor declares a state of emergency, renting or selling essential commodities, including services, at an unconscionable price in the emergency area is unlawful (s. 501.160). A price that grossly exceeds the average price in the 30 days before the declaration is evidence of gouging, unless the increase reflects added costs or market trends.
Not every problem needs a 2 a.m. call. Smoke, burning smells, sparking, a hot panel, water in electrical equipment or a downed line are emergencies (call 911 or the utility for downed lines). A single dead outlet usually is not. See when to call an emergency electrician.
Master electrician vs journeyman: does it change the price?
BLS does not report wages separately for masters and journeymen, so there is no official public rate difference. What the licenses mean:
- Texas master electrician: 12,000 hours of training and two years as a journeyman, plus an exam (Occ. Code 1305.153). Every Texas electrical contractor must be or employ one.
- Texas journeyman: 8,000 hours plus an exam (1305.155), working under a master.
- Florida: the state licenses the contracting business through a certified or registered contractor (EC or ER). Individual journeyman cards are mostly local.
In practice, you usually pay the company's rate, and the company decides who to send. Some companies bill a higher rate when a master does design, load calculations or difficult troubleshooting. Ask who will do your job and what rate applies.
How copper and equipment prices affect your quote
Wire and equipment are a big share of many electrical jobs, and their prices have climbed. The BLS Producer Price Index for nonferrous wire and cable (series WPU1026), which tracks producer prices for copper and aluminum wire, stood at 488.5 in October 2026 (preliminary), up from 408.6 in October 2025 and 374.2 in October 2024. That is roughly a 20 percent rise in one year and about 31 percent in two.
What that means for you:
- Quotes for wire-heavy jobs (rewiring, long feeders to a detached garage, service upgrades) may expire quickly. Ask how long the price is good for.
- An old quote may be honestly re-priced. Ask the contractor to show which material lines changed.
- Some quotes use aluminum feeders for large conductors to save money. That is allowed by code when done correctly with rated terminals. It is different from 1960s to 1970s single-strand aluminum branch wiring, which CPSC links to fire risk at connections. See aluminum wiring.
Permit fees and other add-ons
Many quotes leave out costs that are not labor or parts. Ask about each:
| Add-on | What to know |
|---|---|
| Permit fee | Set by your city or county. Texas cities may not charge state-licensed electricians a separate registration or license fee, but may charge building permit fees (Occ. Code 1305.201(f)). Florida counties and cities set permit and inspection fees and may require one bond per contractor of up to $5,000 (s. 489.537). |
| Re-inspection fee | If work fails inspection, some jurisdictions charge to re-inspect. Your contract should say the contractor pays when its work failed. |
| Notice of commencement (Florida) | Required for jobs over $5,000 before the first inspection (s. 713.135). There is a county recording fee. |
| Utility charges | Service upgrades may carry utility-side costs. LBNL's 2026 median for utility costs passed to the customer was $3,500. Oncor notes a nominal charge to reconnect after a storm hazardous disconnect. |
| Code-required upgrades | When a dwelling service is replaced, the 2020 and later NEC require a surge protective device (230.67) and an outdoor emergency disconnect (230.85). Texas uses the 2026 NEC since Sept. 1, 2026. Florida uses the 2020 NEC through its 8th Edition building code until the 9th Edition (2023 NEC) takes effect, Dec. 31, 2026 per the state (Tampa says Jan. 1, 2027). |
| Drywall patch and paint | Often excluded. Get it in writing. |
See which NEC applies in Texas and Florida.
How to keep electrical costs down without cutting corners
- Bundle tasks into one visit to avoid repeat trip charges.
- Clear access to the panel, attic and work areas before the electrician arrives.
- Get three quotes for planned work, with the same written scope.
- Ask about load management before a costly service upgrade. LBNL's ENERGY STAR work notes many panels have unused breaker space, and alternatives to upgrades can reduce cost for electrification projects.
- Check for grants, not debt. Florida's My Safe Florida Home program and utility rebates change often; check current eligibility with the program directly.
- Never skip the permit to save money. Unpermitted work can cost more later at resale or after an insurance claim.
How to choose a provider
- Ask the service call fee, what it covers and whether it is credited to the repair.
- Ask if pricing is flat rate or hourly, and get a written price or not-to-exceed amount before work.
- Bundle small jobs into one visit.
- Get three written quotes with the same scope for planned work.
- Confirm the permit fee and any utility charges are in the quote.
- Ask how long the quote is valid, given wire price swings.
- Check that code-required items (surge protection, emergency disconnect on service changes) are included.
- Get drywall patching and cleanup in writing.
- Pay only after work passes inspection for the final installment.
Related electricians guides
- How Do You Read and Compare Electrical Quotes? Sample Line Items and Red Flags
- How Do You Hire an Electrician in Texas or Florida? Licenses, Insurance, Contracts and Red Flags
- Electrical Panel Upgrade (100A to 200A): Cost, Process, Permits and Timeline
- How Much Does It Cost to Rewire a House? Real Cost Data, the Process, Timeline and Living Through It
- How Do You Install a Home EV Charger? Circuits, Panels, Permits, GFCI Rules and Cost in Texas and Florida
- What Counts as an Electrical Emergency? When to Call 911, the Utility or an Electrician
- Which Appliances Need a Dedicated Circuit? Kitchens, Ranges, Dryers, Mini-Splits, Tankless Heaters and Garages
Electricians by state and city
Questions people ask
How much does an electrician charge per hour in Texas or Florida?
There is no dated public study of billed electrician rates for either state, so be wary of precise averages. What we know: BLS May 2025 data put the mean electrician wage at $28.50 an hour in Texas and $27.72 in Florida. Billed rates are higher because they cover insurance, licensing, the truck, non-billable time and warranty. Compare two or three local companies for the same task.
Are electricians cheaper in Texas than in Florida?
Labor costs are very close. BLS May 2025 mean hourly wages were $28.50 in Texas and $27.72 in Florida, and median annual wages were $58,570 and $57,250. Among big metros, Austin had the highest median hourly wage ($29.03) and Orlando the lowest ($24.43). Differences between your quotes usually come from scope, materials and overhead, not state wage levels.
Is a trip charge normal for an electrician?
Yes. A service call or trip charge pays for sending a licensed electrician and stocked truck, and for diagnosing the problem. Ask what it includes, whether it is credited toward the repair, and whether nights or weekends cost more. Get a written price for the repair itself before work begins.
Do electricians charge for estimates?
It depends on the company and the job. Planned projects, like a panel upgrade or generator hookup, are often quoted free after a site visit. Troubleshooting usually carries a diagnostic or service fee because finding the problem is the work. Neither Texas nor Florida has a rule either way, so ask before the visit.
How much does a panel upgrade cost?
LBNL's August 2026 national survey found a median of $3,500 for a main service panel replacement in a single-family home, with the middle half of responses between $2,100 and $5,000. Raising the service rating adds customer-side equipment (median $2,800) and sometimes utility charges (median $3,500). Your price depends on panel size, code upgrades, permits and utility work.
Why did my electrician's price go up since the last quote?
Material prices may have moved. The BLS producer price index for nonferrous wire and cable rose about 20 percent from October 2025 to October 2026. Equipment prices and code changes can also affect quotes. Ask which lines changed and how long the new price is valid.
What is the average electrician salary in Houston and Miami?
BLS May 2025 estimates show a median annual wage of $59,180 for electricians in the Houston metro and $58,630 in the Miami metro. Mean hourly wages were $29.55 in Houston and $28.81 in Miami. These are employee wages, not what a contractor bills a customer.
Sources
- BLS Occupational Employment and Wage Statistics, Electricians (47-2111), May 2025, via BLS Public Data API
- BLS Producer Price Index, Nonferrous wire and cable (WPU1026)
- LBNL, panel and service upgrade cost survey (August 2026)
- LBNL for ENERGY STAR, Reducing the Cost of Electrification with Alternatives to Electric Panel Upgrades (2023)
- DOE Alternative Fuels Data Center, Charging at home
- Texas Occupations Code Chapter 1305
- TDLR Electrical Contractor license requirements
- Texas Business and Commerce Code Chapter 17 (DTPA)
- Texas Property Code Chapter 92
- Florida Statutes s. 501.160, Unconscionable prices during emergencies
- Florida Statutes s. 489.537, Application of this part
- Florida Statutes s. 713.135, Notice of commencement and permits
- Oncor meter FAQ
- TDLR adopts 2026 NEC (rulemaking notice)
- Florida Building Commission, 9th Edition course text (2023 NEC, effective Dec. 31, 2026)
- City of Tampa, FBC 9th Edition announcement
- Miami-Dade, 2023 FBC electrical changes (2020 NEC)
- CPSC, Repairing aluminum wiring
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


