New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Electricians

Electrician vs Handyman vs HVAC Tech vs Pool Contractor: Who Can Legally Do Electrical Work in Texas and Florida?

A trade-by-trade legal map of who may touch your wiring in Texas and Florida, built from the actual exemption lists in Texas Occupations Code ch. 1305 and Florida Statutes ch. 489.

In both Texas and Florida, wiring work generally needs a state-licensed electrician or electrical contractor. A handyman has no electrical exemption in either state: Florida's $2,500 minor-work exemption sits in the construction part of ch. 489, not the electrical part, and Texas has no dollar exemption at all. Narrow exceptions let licensed HVAC contractors wire their own equipment from the disconnect, let plumbers connect water heaters to existing circuits, and cover low-voltage work.

Key facts

  • Texas bars anyone from performing or offering electrical work without a license unless a listed exemption applies (Occ. Code 1305.151).
  • Texas exempts licensed air conditioning and refrigeration contractors for the electrical connections supplying HVAC equipment, including the required disconnect (Occ. Code 1305.003(a)(11)).
  • A Texas licensed plumber may connect water heaters, disposals, dishwashers and clothes washers to existing electrical circuits only (Occ. Code 1305.003(a)(21)).
  • Texas low-voltage work (Class 1, 2 and 3 circuits, fire alarm, fiber and communications circuits) is exempt from electrician licensing (Occ. Code 1305.003(a)(12)), but security camera and alarm companies fall under the Private Security Act (Occ. Code ch. 1702).
  • Florida's electrical exemption list (s. 489.503) contains no dollar-based minor-work exemption; the $2,500 casual or minor work exemption is in s. 489.103(9), which covers Part I construction contracting.
  • Florida Class A air-conditioning contractors may replace, disconnect or reconnect power wiring on the line or load side of the dedicated existing disconnect on single-phase systems, but their scope excludes electrical power wiring otherwise (s. 489.105(3)(f)).
  • Florida general, building and residential contractors must subcontract all electrical work unless they hold the electrical license themselves (s. 489.113(3)).
  • Performing electrical work without a license is a Class C misdemeanor in Texas (Occ. Code 1305.303); TDLR can also fine and issue cease-and-desist orders.

The short answer: a handyman is not an electrician in either state

Many people assume small electrical jobs are fair game for any handy person. The law in Texas and Florida says otherwise. Both states define electrical work broadly and then list exact exceptions. If a job is not on the exception list, it needs a licensed electrician working through a licensed electrical contractor.

In Texas, "electrical work" means any labor or material used to install, maintain or extend a wiring system and its equipment in, on, outside or attached to a building, including the service entrance conductors (Occupations Code 1305.002(11)). No one may perform or offer to perform it without the right license unless an exemption applies (1305.151). TDLR adds that non-exempt work must be done through a licensed electrical contractor.

In Florida, Part II of Chapter 489 controls electrical and alarm contracting. Section 489.531 makes it illegal to practice electrical contracting without a certificate or registration, to advertise it without a license, or to employ unlicensed people to do it. The only ways out are the exemptions in s. 489.503.

So the real question is never "Is this job small?" It is "Is this job on the exemption list, and does this person's license cover it?" The rest of this guide walks through each trade you are likely to call.

Who can do what: the Texas and Florida scope matrix

This table summarizes what each trade may legally do on the electrical side. It is a plain-English reading of the statutes cited below. Local rules can be stricter, so treat it as a starting point and confirm with your city or county permit office.

WhoTexasFlorida
Handyman (no trade license)No electrical exemption. Cannot wire, add outlets or circuits for pay. Plugging in a cord-and-plug appliance is not electrical work.No exemption in s. 489.503. The $2,500 minor-work exemption (s. 489.103(9)) is in the construction part and does not mention electrical contracting.
HVAC contractorLicensed ACR contractor may make the electrical connections supplying HVAC equipment, including the required disconnect (1305.003(a)(11)).Class A and B AC contractors may rewire on either side of the dedicated existing disconnect on single-phase systems and repair or replace dedicated HVAC circuit wiring, disconnects, breakers or fuses with a breaker lock (s. 489.105(3)(f)-(g)). New power wiring is excluded.
PlumberLicensed plumber may connect water heaters, disposals, dishwashers, softeners and washers to existing circuits only (1305.003(a)(21), (f)).No matching electrical exemption found in s. 489.503. Use an electrician for the electrical connection unless your permit office confirms otherwise.
Pool contractorPool-related electrical work needs an electrician or a TDLR residential appliance installer working for a licensed appliance installation contractor (1305.002(12-b), (16)).Pool/spa contractor scope covers equipment, piping and heaters but not electrical power wiring; s. 489.103(6) says the products exemption does not cover wiring of any appliance without a factory cord and plug.
Solar companyTDLR registers residential solar retailers and salespeople for sales contracts; the wiring is still electrical work under ch. 1305.A licensed solar contractor installs PV systems (s. 489.105(3)(o)); s. 489.103(7) states owners using the solar exemption must use a licensed electrical contractor for the wiring and interconnection.
Generator dealerNo dealer exemption. The transfer switch and connection to premises wiring are electrical work.No dealer exemption. Transfer switch wiring needs an electrical contractor.
Security camera / alarm installerLow-voltage wiring exempt from 1305, but alarm and camera companies are regulated under Occ. Code ch. 1702.Alarm work needs a DBPR alarm license (EF, EG, EJ and related) or an EC certified electrical contractor.
Landscaper / irrigation installerMay install irrigation controls and low-voltage exterior and holiday lighting, but not the power source (1305.003(a)(13)).Plug-in low-voltage landscape lighting with a factory cord needs no license (s. 489.503(24)); anything wired into the house does.
Appliance dealer or manufacturerMay repair appliances with same type and ampacity parts (1305.003(a)(22)); hard-wired connection needs an electrician or appliance installer.Finished products that do not become a fixed part of the structure are exempt (s. 489.503(5)).
Building maintenance employeeExempt if regularly employed by one business, not working for the public, and not doing new construction (1305.003(a)(8)).Employees of licensed contractors are covered under the license (s. 489.503(1)); a narrow apartment exemption exists in s. 489.103(23).
General contractorNo exemption. Must use a licensed electrical contractor.Must subcontract all electrical work unless it holds the electrical license (s. 489.113(3)).

Can a handyman change a light fixture in Texas?

Texas law has no "minor repair" or dollar-limit exemption for electrical work. Replacing a hard-wired light fixture, switch or outlet means disconnecting and reconnecting conductors in a building's wiring system, which fits the statute's definition of electrical work. A handyman who does it for pay, without a license and outside an exemption, risks a Class C misdemeanor under 1305.303 and TDLR administrative penalties.

What a handyman can do in Texas:

  • Hang a plug-in lamp, mount a TV, or install a cord-and-plug appliance. Inserting or removing a plug is specifically carved out of "residential appliance installation" in 1305.002(12-b).
  • Patch drywall after an electrician has finished.
  • Install low-voltage items that the law exempts, such as a doorbell transformer's low-voltage side, but not the 120-volt side.

The homeowner is different. A person who owns and lives in a dwelling may do work on it that is not specifically regulated by a city ordinance (1305.003(a)(6)). That exemption belongs to the owner-occupant, not to anyone they hire. Many Texas cities, including Houston, require a licensed electrical contractor for any work that needs a permit, so the owner exemption is narrower inside city limits. See what DIY electrical work you can legally do.

Can a handyman do electrical work in Florida?

Florida draws a sharp line that many handymen miss. The well-known $2,500 exemption for work "of a casual, minor, or inconsequential nature" is in s. 489.103(9). That section lists exemptions from Part I of Chapter 489, which governs construction contractors such as general, roofing and plumbing contractors. Electrical contracting is regulated separately under Part II, and its exemption list, s. 489.503, has no dollar-based minor-work exemption.

In practice, that means:

  • A Florida handyman cannot legally replace a ceiling fan, swap outlets, add a circuit or change a panel breaker for pay, no matter how small the bill.
  • The $2,500 exemption also does not apply if the work is part of a larger job split into pieces, or if the person advertises as a contractor (s. 489.103(9)(a)-(b)).
  • Unlicensed contracting is a basis for local governments to refuse permits (s. 489.537(3)(e)), and DBPR can act on complaints.

Some local governments publish their own handyman guidance. If a handyman tells you "Florida lets us do anything under $2,500," ask them to show you where s. 489.503 says so. It does not. To check any license, use the DBPR lookup described in our Florida electrician licensing guide.

HVAC technicians: what they can wire and where they must stop

This is where homeowners get the most mixed messages. When an AC system is replaced, someone has to connect power to the new condenser and air handler. Who is allowed to do that depends on whether the circuit already exists.

Texas

A licensed air conditioning and refrigeration (ACR) contractor under Occupations Code ch. 1302 is exempt from the electrician license for "electrical connections supplying heating, ventilation, and cooling and refrigeration equipment, including any required disconnect exclusively for the equipment" (1305.003(a)(11)). In plain terms, the HVAC company can connect the unit and install its disconnect. A brand-new circuit from the panel, a panel upgrade to handle a larger unit, or moving the circuit is a judgment call for your city inspector. Many cities treat new branch circuits as electrical work that needs an electrician's permit.

Florida

Florida's statute is more detailed. A Class A air-conditioning contractor may "replace, disconnect, or reconnect power wiring on the line or load side of the dedicated existing electrical disconnect switch on single phase electrical systems" and "repair or replace power wiring, disconnects, breakers, or fuses for dedicated HVAC circuits with proper use of a circuit breaker lock" (s. 489.105(3)(f)). The same paragraph then says the scope does not include "electrical power wiring" in general. Class B contractors have the same electrical language within their smaller equipment limits.

Example: if your 3-ton condenser in Orlando is replaced with the same size unit on the same circuit, the AC contractor can do the electrical swap at the disconnect. If the new unit needs a bigger breaker and larger wire run from the panel, that is new power wiring and calls for a licensed electrical contractor and permit.

For more on AC circuits, see AC and HVAC electrical problems.

Pool and spa contractors

Pools combine water and electricity, which is why both states keep pool wiring under tight control.

Texas created a special license path for pool equipment. A "pool-related electrical device" is pool equipment installed as a unit, directly connected to a circuit, performing a specific function and using single-phase power of 240 volts or less (1305.002(15)). Connecting or disconnecting that device to an existing circuit is "pool-related electrical maintenance" (1305.002(16)). A TDLR residential appliance installer may do it while working for a licensed residential appliance installation contractor; no experience is required to apply, but the exam is (TDLR). Running a new circuit, bonding the pool, or installing a subpanel at the equipment pad is regular electrical work for a licensed electrician.

Florida pool/spa contractor scopes in s. 489.105(3)(j)-(l) cover construction, repair and servicing, equipment installation, heaters and piping. The electrical side belongs to an electrical contractor. Section 489.103(6) adds that the finished-products exemption does not cover in-ground pools and spas involving wiring of any appliance without a factory-installed cord and plug.

Either way, bonding and GFCI protection are inspected items. Read pool and spa bonding rules before you sign a pool contract, and ask the pool company who will hold the electrical permit.

Solar companies, generator dealers and EV charger sellers

Solar

In Texas, TDLR now runs a Residential Solar Retailers program. A residential solar retailer or salesperson sells or leases solar energy systems designed mainly for household use, and since September 1, 2026 they must be registered with TDLR (Occupations Code ch. 1806); buyers may cancel through the fifth business day after signing. TDLR temporarily suspended enforcement of two contract and education rules (16 TAC 71.41 and 71.43) until November 1, 2026. Registration covers the sale; it does not license anyone to wire. The inverter, disconnects and the tie into your panel are electrical work under ch. 1305.

In Florida, a "solar contractor" license covers installing and repairing solar panels for water heating, pool heating and photovoltaic systems and their equipment (s. 489.105(3)(o)). Florida law also says that owners using the solar owner-builder provision "must utilize a licensed electrical contractor to effectuate the wiring of the solar panels, including any interconnection to the customer's residential electrical wiring" (s. 489.103(7)(a)3). Ask any solar company which licensed electrical contractor will pull the electrical permit. See solar interconnection.

Generators and transfer switches

Neither state gives generator dealers an electrical exemption. Connecting a standby generator or installing a transfer switch or interlock is electrical work, and a mistake can backfeed the grid and endanger line workers. CPSC warns never to power house wiring by plugging a generator into a wall outlet. Many dealers employ or partner with a licensed electrical contractor; ask for that license number. See transfer switches and interlocks.

EV chargers sold by dealers

A charger that plugs into an existing 240-volt receptacle needs no electrician. Installing a new 240-volt circuit or hard-wiring a charger does. The U.S. Department of Energy says a qualified electrician can add circuits for Level 2 charging and permits may be required. See EV charger installation.

Security cameras, doorbells, alarms and smart-home installers

Low-voltage work is where state laws diverge the most.

Texas: Class 1, 2 and 3 remote control, signaling and power-limited circuits, fire alarm circuits, optical fiber and communications circuits are exempt from the electrician license (1305.003(a)(12)). That does not mean anyone can install cameras for pay. The Private Security Act defines an "alarm system" to include a television or still camera system that records images of a residence or business or is monitored by security services (Occ. Code 1702.002(1)), and a person who sells, installs, services or monitors an alarm system acts as an alarm systems company (1702.105). Those companies are regulated under ch. 1702 through the Texas Department of Public Safety. Mounting a plug-in Wi-Fi camera in your own home is not regulated.

Florida: Alarm work falls under Part II of Chapter 489. DBPR issues alarm system contractor licenses (EF for all alarm types, EG for all but fire, and the registered residential alarm license EJ for burglar alarms in homes). A certified electrical contractor (EC) may do all alarm work; a registered electrical contractor (ER) may not contract for alarm systems and must subcontract alarm work other than raceways (s. 489.537(2)(b)). Cable and telecom companies have their own exemption for communications wiring (s. 489.503(14)), and the exemption expressly does not relieve anyone from alarm licensing.

If a smart-home installer will touch any 120-volt device, such as smart switches, hard-wired doorbell transformers or powered hubs, the line-voltage part needs an electrician. See smart home electrical.

Water heaters, dishwashers and other appliances

Swapping a water heater is a common gray zone. Here is how the law treats it.

  • Texas plumbers may install, service and replace plumbing fixtures and appliances, including water heaters, disposals, dishwashers, water softeners and clothes washers, on existing electrical circuits only (1305.003(a)(21)). The new appliance must meet the requirements of the existing circuit (1305.003(f)). If a new 30-amp circuit is needed for a bigger heater, an electrician runs it.
  • Texas appliance installers licensed by TDLR may connect or disconnect a residential appliance to an existing circuit (1305.002(12-b)). A "residential appliance" is equipment installed as a unit in a home of four stories or less, directly connected to a circuit, and performing a specific function (1305.002(12-a)).
  • Texas appliance dealers and manufacturers may repair an appliance using parts of the same type and ampacity (1305.003(a)(22)).
  • Florida has no plumber electrical exemption in s. 489.503. Florida does exempt certain apartment maintenance employees who repair existing electric water heaters and HVAC systems, but only at communities of at least 100 apartments, with a National Apartment Association certificate, parts under $1,000 per repair, and no functional replacement (s. 489.103(23)).

For new appliance circuits, see dedicated appliance circuits.

Landlords, maintenance staff and property managers

Rental owners often ask whether their maintenance worker can fix a dead outlet or a tripping breaker.

Texas: The maintenance exemption in 1305.003(a)(8) covers electrical work by a person who does not do electrical work for the public, is regularly employed as a maintenance person or maintenance electrician for a business, and is not installing equipment during new construction. A property management company's full-time maintenance employee doing repairs on the company's own buildings may fit. A handyman working for many landlords does not. TDLR also licenses maintenance electricians (8,000 hours of on-the-job training plus an exam).

Florida: Employees of a licensed contractor are covered while working within that license with the licensee's knowledge (s. 489.503(1)). The apartment maintenance exemption in s. 489.103(23) is narrow: existing electric water heaters and HVAC only, 100-plus units, certified technicians, and repairs under $1,000 in parts. Local governments may still require licensing for these workers.

Landlords also have repair duties under state law: Texas Property Code 92.052 and Florida Statutes s. 83.51. A legal repair done by the wrong person can still leave the landlord exposed. See landlord and tenant electrical rights.

General contractors and remodelers

A kitchen remodel touches every trade. Who is responsible for the wiring?

In Florida, the answer is written into law. Section 489.113(3) says a contractor "shall subcontract all electrical, mechanical, plumbing, roofing, sheet metal, swimming pool, and air-conditioning work, unless such contractor holds a state certificate or registration in the respective trade category." Your general or residential contractor manages the job, but a licensed electrical contractor must pull the electrical permit and do the work.

In Texas, ch. 1305 has no general contractor or remodeler exemption. The electrical portion must be done through a TDLR-licensed electrical contractor. Houston, for example, requires all permitted electrical work to be performed by a licensed electrical contractor, who schedules the inspections.

Ask your remodeler for the electrical subcontractor's name and license number before work starts. In Florida, a contract over $2,500 on a home must also include the statutory construction lien notice (s. 713.015), and unpaid subcontractors, including the electrician, can lien your property even if you paid the general contractor.

Why it matters: insurance, inspections, resale and safety

Using the wrong trade is not just a technicality.

  • Fire risk. The U.S. Fire Administration estimated 23,700 residential electrical malfunction fires in 2023, with 305 deaths and about $1.5 billion in losses. Proper connections and correct breaker sizing are what licensing and inspections are meant to protect.
  • Permits and inspections. Many jobs need a permit, and only licensed contractors can pull most electrical permits. Unpermitted work can surface during a sale or a Florida 4-point inspection, which records wiring types and hazards such as double taps, improper breaker sizes and exposed wiring.
  • Insurance. Florida's Citizens Property Insurance will not accept applications for homes with electrical systems not in good working order or with existing hazards. Texas insurers may base decisions on the physical condition of wiring (TDI, Sept. 2026).
  • Your remedies. Licensed contractors answer to TDLR or DBPR, carry required insurance (Texas contractors need at least $300,000 per occurrence in liability coverage), and can be disciplined. Unlicensed workers leave you with fewer options.
  • Cancellation rights. Texas's three-day home solicitation cancellation law does not apply to TDLR license holders when you start the transaction, except for warranty breach or code-violating installation (1305.004).

How to check a license before anyone starts

  1. Ask for the license number and the exact license type. In Texas, electrical contractors must show their business name and TDLR number on both sides of their vehicles in letters at least two inches high (1305.166).
  2. Texas: search TDLR's online license lookup by name or number, or call 800-803-9202 (in Texas) or 512-463-6599. Confirm the person is a master, journeyman or residential wireman and that the business holds an electrical contractor license. Note that a residential wireman may work only in homes of up to four stories.
  3. Florida: search DBPR. EC licenses are statewide; ER licenses work only in the counties or cities where registered; ES and ET specialty licenses are limited to their category. For HVAC work, verify the CAC or RAC license; for pools, CPC or RPC.
  4. Check the permit. The permit should list the licensed contractor. In Houston, the contractor must also be registered with the city.
  5. Report problems. Texas: contact the local licensing authority first if your city has one, or file with TDLR Enforcement (512-539-5600). Florida: DBPR's Customer Contact Center is (850) 487-1395.

More detail: Texas TDLR licensing and our hiring checklist.

How to choose a provider

  • Write down the job and ask: does it touch 120- or 240-volt wiring?
  • If yes, assume a licensed electrician is required unless a specific exemption applies.
  • For HVAC swaps, ask whether the existing circuit and disconnect are being reused.
  • For water heaters, confirm the new unit matches the existing circuit size.
  • For pools, solar and generators, ask which licensed electrical contractor will pull the electrical permit.
  • For cameras and alarms, verify the alarm license (Texas ch. 1702; Florida DBPR EF, EG or EJ).
  • Look up every license on TDLR or DBPR before work starts.
  • Make sure the permit names the licensed contractor.
  • Keep copies of permits, inspection results and invoices for resale and insurance.

Related electricians guides

Electricians by state and city

Questions people ask

Can a handyman install a ceiling fan in Florida?

Not legally if it involves connecting the fan to the home's wiring. Florida's electrical exemptions in s. 489.503 have no minor-work dollar threshold, and a fan swap means disconnecting and reconnecting branch-circuit conductors. The $2,500 minor-work exemption applies to Part I construction work, not electrical contracting. A homeowner may do it on their own single-family home under the owner-builder rules, but cannot hire an unlicensed person to do it.

Can my HVAC company replace the breaker for my AC?

In Florida, yes, if it is the dedicated HVAC circuit. Air-conditioning contractors may repair or replace power wiring, disconnects, breakers or fuses for dedicated HVAC circuits, using a breaker lock (s. 489.105(3)(f)). In Texas, a licensed ACR contractor is exempt for electrical connections supplying HVAC equipment, including its disconnect. Panel changes or new circuits typically need an electrician, and your city may treat breaker work as electrical.

Is low-voltage lighting a DIY or handyman job?

Often, yes. Texas lets landscapers install low-voltage exterior and holiday lighting but not the required power source (1305.003(a)(13)). Florida exempts low-voltage landscape lighting with a factory cord and plug that needs no change to the home's wiring (s. 489.503(24)). A new outdoor GFCI receptacle or a hard-wired transformer is electrical work.

Can a general contractor do electrical work in Florida?

Only if the contractor also holds an electrical certificate or registration. Florida s. 489.113(3) requires contractors to subcontract all electrical work otherwise. Ask for the electrical subcontractor's license number and check it on DBPR. The permit should name the licensed electrical contractor, not the general contractor.

Can my landlord's maintenance worker do electrical repairs in Texas?

Possibly. Texas exempts a person regularly employed as a maintenance person for a business who does not do electrical work for the public and is not working on new construction (1305.003(a)(8)). A worker hired job by job for many owners does not qualify. Tenants with unsafe conditions should use the Texas Property Code repair process.

Who installs security cameras legally in Texas?

Low-voltage wiring is exempt from the electrician license, but a business that sells, installs or monitors camera systems that record a home or business is an alarm systems company under the Private Security Act (Occ. Code 1702.002, 1702.105). Check that the company is licensed under ch. 1702. Installing your own plug-in camera is not regulated.

What is the penalty for unlicensed electrical work?

In Texas, it is a Class C misdemeanor, and TDLR can impose administrative penalties and cease-and-desist orders (1305.301-1305.303). In Florida, s. 489.531 prohibits it and local governments can refuse permits to contractors with recent final action for unlicensed contracting (s. 489.537(3)(e)). Homeowners may also face failed inspections, insurance problems and lien disputes.

Does a plumber need an electrician to install a tankless water heater?

In Texas, a plumber may connect a water heater to an existing circuit only. Electric tankless heaters often need much larger circuits than the old tank, so a new circuit and maybe a panel upgrade, done by an electrician, is common. In Florida, there is no plumber electrical exemption, so the electrical connection should be done by an electrical contractor.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration