Local Guide · Roofing
Florida Wind Mitigation Inspection: How Do Roof Credits Work, Question by Question?
The wind mitigation form decides a big part of your Florida insurance bill. Here is every question on the 2026 OIR-B1-1802 form, what it means, and which reroof choices actually earn credits.
A wind mitigation inspection documents your home's hurricane-resistance features on Florida's form OIR-B1-1802 so your insurer can apply the wind premium credits state law requires. The 2026 version (Rev. 04/26), required since April 1, 2026, has 9 questions, including roof covering, deck attachment, roof-to-wall connections, roof shape and secondary water resistance. A form is valid up to 5 years if the house is unchanged. A reroof can improve several answers if the upgrades are documented.
Key facts
- Form OIR-B1-1802 (Rev. 04/26) took effect April 1, 2026; inspections on or after that date must use it.
- Citizens accepts the prior Rev. 01/12 form if completed within 5 years before April 1, 2026 and the structure is unchanged.
- Citizens said the 2026 form changes do not change the credits it applies for now.
- Insurers must include actuarially reasonable windstorm mitigation discounts in residential rate filings (s. 627.0629).
- Insurers must notify policyholders of available mitigation discounts at issuance and every renewal (s. 627.711).
- The form is valid for up to 5 years if there are no material changes to the structure.
- Florida reroofs on site-built single-family homes must include secondary water barriers and improved deck attachment (s. 553.844).
- Knowingly using a false mitigation form to get a discount is a first-degree misdemeanor (s. 627.711(7)).
What is a wind mitigation inspection in Florida?
A wind mitigation inspection is a visit where a qualified inspector documents the features of your home that help it resist hurricane winds. The inspector records the results on a state form, the Uniform Mitigation Verification Inspection Form, OIR-B1-1802, and attaches photos. Your insurer uses the form to decide which wind mitigation credits you get on the wind portion of your premium.
It is not a home inspection, and it does not grade the roof's condition. Citizens Property Insurance says plainly that the form is used only to verify wind mitigation construction features and is "not acceptable proof of roof condition or replacement." For roof condition, insurers use a 4-point or roof inspection instead. See our 4-point and roof inspection guide.
Why insurers must give you credits
Two statutes make this work:
- s. 627.0629 requires residential property rate filings to include actuarially reasonable discounts, credits or other rate differentials for windstorm mitigation, including features that improve wind uplift resistance, roof strength, roof covering performance and roof-to-wall strength.
- s. 627.711 requires insurers to tell you, at issuance and at every renewal on an OIR-prescribed form, which mitigation discounts are available, and to accept the uniform form when it is signed by a qualified inspector. An insurer may, at its own expense, have the form independently verified before accepting it.
The new 2026 form: OIR-B1-1802 (Rev. 04/26)
The Office of Insurance Regulation (OIR) revised the form. The new version, OIR-B1-1802 (Rev. 04/26), took effect April 1, 2026, and any inspection done on or after that date must use it. It was adopted by Rule 69O-170.0155, Florida Administrative Code.
What changed, in plain English:
- More questions. The old 2012 form had 7 questions. The new form has 9, adding a Region question based on design wind speed and a Roof Slope question.
- A 2007-code option. The building code question now separates homes built to the 2001/2004 Florida Building Code from those built to the 2007 code or later.
- FORTIFIED certificates count. An IBHS FORTIFIED Home Roof, Silver or Gold certificate can be used to validate certain features.
- Proof can be photos or documents. Citizens' guide says that previously only photos were allowed, and now photos or valid documentation, such as FORTIFIED certificates or compliance paperwork, may be accepted.
- New answer choices for spray foam deck adhesives, "connection(s) not installed as intended," and taped deck seams.
Do the new questions change your discount? Not yet, as far as Citizens is concerned. Citizens told agents in March 2026 that the new form's changes "will not result in any difference to the credits available and applied at this time." A law firm that followed the rulemaking reported that the form reflects a 2024 wind-loss study and that new discount tables would come through separate rulemaking. Watch for that.
Is my old form still good? Citizens will keep accepting the old Rev. 01/12 form if it was completed within the five years before April 1, 2026 and no changes were made to the structure. Private insurers may have their own policies, so ask yours.
The questions on the form, one by one, and what they mean for your roof
Here is each question on the Rev. 04/26 form, what the inspector looks for, and what it means if you are planning a reroof.
1. Building code
Which code was in force when the home's original permit was applied for: the 2001/2004 Florida Building Code (FBC), the 2007 FBC or later, the South Florida Building Code of 1994 for High-Velocity Hurricane Zone (HVHZ) homes in Miami-Dade and Broward, or unknown. For homes built in 2002 or 2003, the inspector needs a permit application dated after March 1, 2002; for 2007 or 2008 homes, after December 8, 2006. Newer homes get many features built into the base rate. You cannot change this answer with a reroof.
2. Region (new)
Your location by design wind speed: HVHZ, Region 1 (140 mph or more), Region 2 (130 to 139 mph) or Region 3 (under 130 mph), from the ASCE 7-22 hazard tool. This is a fact about where you live.
3. Roof slope (new)
Whether the main roof (the slope covering at least two-thirds of the main roof area) is 6:12 or steeper, or less than 6:12. Also a fact about your house.
4. Roof covering
Each roof covering type (shingle, concrete or clay tile, synthetic tile, metal, built-up, membrane, other) with its permit application date, product approval number and year installed. The inspector then picks whether all coverings meet the code. Answer A, the one that usually earns credit outside the HVHZ, means every covering has a Florida or Miami-Dade product approval current at installation, or a roofing permit applied for on or after March 1, 2002, or the roof is original on a home built in 2004 or later. This is what people mean by "FBC equivalent." A permitted reroof almost always fixes this question, as long as you keep the permit and product approval number.
5. Roof deck attachment
How the plywood or OSB roof sheathing is nailed to the trusses, judged by the weakest spot the inspector can see from the attic:
| Answer | What it means | Minimum uplift on the form |
|---|---|---|
| A | Staples or 6d nails at 6 inches on edges and 12 inches in the field | At least 55 psf |
| B | 8d nails, maximum 12 inches apart in the field | At least 103 psf |
| C | 8d nails, maximum 6 inches apart in the field (or dimensional lumber/tongue and groove with proper nailing) | At least 182 psf |
| D | Reinforced concrete roof deck | n/a |
| E | Spray foam adhesive rated 110 psf, installed along all rafter-deck joints and panel seams | 110 psf |
Reroof tie-in: Florida requires a roof replacement on a site-built single-family home to include improved roof-deck attachment (s. 553.844). When the old covering is off, the deck is exposed, and renailing to the current code pattern is the cheapest moment this will ever happen. IBHS testing found that switching from smooth nails to 8d ring-shank nails with tighter spacing can double a deck's uplift resistance. Ask your roofer to write the nail type and pattern into the contract, and photograph it before the underlayment goes on.
6. Roof-to-wall attachment
How the trusses or rafters are tied to the walls, again at the weakest point (ignoring hip and valley jacks within 5 feet of a corner):
- Toenails: nails driven at an angle through the truss into the wall plate, or connectors not meeting the minimum conditions. Fewest credits.
- Clips: metal connectors that do not wrap over the top of the truss, or one strap secured with at least 3 nails that does not meet the wrap rules. A purpose-made fastener with a documented capacity of 386 pounds or more also counts.
- Single wraps: a single strap that wraps over the truss with at least 2 nails on the front and 1 on the opposite side (or a documented 535 pounds or more).
- Double wraps: two straps, one on each side, each wrapped over the truss, or a single strap secured on both sides with at least 3 nails each (or a documented 891 pounds or more).
- Structural: anchor bolts structurally connected, or a reinforced concrete roof.
Reroof tie-in: For homes in the wind-borne debris region with an insured value (or, if uninsured, just value) of $300,000 or more, Florida requires the roof replacement to include roof-to-wall connection improvements, but only if the gable ends or all corners can be done for about 15 percent of the reroof cost (s. 553.844). Even when not required, adding straps from the attic or from above at the eaves during a reroof can move you from toenails or clips to a better answer.
7. Roof geometry
Hip roof means a roof where non-hip features (like gables) make up no more than 10 percent of the total roof perimeter. Flat applies only to buildings with five or more units where at least 90 percent of the main roof is under 2:12. Everything else is "other." Insurers commonly give hip roofs a credit because they hold up better in high wind than gable roofs; the amount depends on the insurer's filed rates. You cannot change geometry with a normal reroof. Citizens says a hip roof credit alone can be supported with clear photos instead of a full inspection.
8. Sealed roof deck / secondary water resistance (SWR)
SWR is a backup layer that keeps water out if wind strips the shingles or tiles. Standard felt underlayment does not count. The form accepts:
- A fully adhered polymer-modified bitumen underlayment meeting ASTM D1970, applied directly to the deck
- Deck seams taped with a self-adhering strip at least 3.75 inches wide (ASTM D1970 or AAMA 711 Level 3), covered with felt or synthetic underlayment
- Two layers of qualifying felt or synthetic underlayment with no tape
- Spray foam applied along rafter-deck joints and all panel seams
Reroof tie-in: Florida requires a secondary water barrier with a roof replacement on site-built single-family homes (s. 553.844). The key is getting it documented: the inspector usually cannot see it after the roof is finished, so ask your roofer for dated photos of every slope showing the tape or membrane, and the product data sheet.
9. Opening protection
The weakest protection on all windows, doors, sliders, skylights and garage doors, from impact-rated products (A or B) to plywood meeting the 2007 FBC table (C), unverified shutters (N), none (X) or damaged (Z). Skylights are roof openings, so a reroof that replaces skylights with impact-rated units can matter here.
Which re-roof choices move your credits, and which don't?
| Form question | Can a reroof change it? | What to ask your roofer for |
|---|---|---|
| Roof covering (Q4) | Yes | Permit, final inspection, FBC or NOA product approval number |
| Deck attachment (Q5) | Yes, during tear-off | 8d ring-shank nails at the code pattern; photos before underlayment |
| Roof-to-wall (Q6) | Sometimes | Price to add straps at gable ends or corners; manufacturer specs |
| SWR (Q8) | Yes | Self-adhered membrane or taped seams; dated photos of every slope |
| Opening protection (Q9) | Only skylights | Impact-rated skylight with product approval |
| Code, region, slope, geometry (Q1 to Q3, Q7) | No | Nothing; these describe the house |
The IBHS FORTIFIED Roof standard bundles several of these: a sealed roof deck, ring-shank deck nails in an enhanced pattern, a wider drip edge with a fully adhered starter strip, and wind- and rain-resistant attic vents. Since a FORTIFIED certificate can now validate features on the form, it can be a clean way to document an upgraded reroof.
No state agency publishes a dated price list for these add-ons, and roofer quotes vary widely. Ask for each upgrade as a separate line item so you can compare bids and see what each costs. For full reroof price ranges, see our roof replacement cost guide.
Does a new roof automatically improve my wind mit score?
No. A new roof usually fixes the roof covering question and, because of s. 553.844, should bring SWR and better deck attachment. But the insurer only gives credit for what is documented. If no one photographs the deck nailing and SWR before they are covered, the next inspector may have to mark "unknown." Schedule a new wind mitigation inspection after the final permit inspection and hand the inspector your photos and paperwork.
Who can perform a wind mitigation inspection?
Section 627.711(2) lists who can sign the form, and the form repeats it:
- A home inspector licensed under s. 468.8314 who has completed the required hurricane mitigation training approved by the Construction Industry Licensing Board and passed a proficiency exam
- A building code inspector certified under s. 468.607
- A general, building or residential contractor licensed under s. 489.111
- A professional engineer licensed under s. 471.015
- A professional architect licensed under s. 481.213
- Any other person or entity the insurer recognizes as qualified under s. 627.711(2)
Licensed contractors and engineers may send a qualified direct employee and remain responsible for that person's work. Everyone else must inspect personally. You sign the form too, confirming the inspector actually came and showed identification.
Penalties: knowingly providing a false or fraudulent form to get a discount you are not entitled to is a first-degree misdemeanor under s. 627.711(7), and inspectors who certify false forms can face investigation and discipline. Do not pay anyone who offers to "find" features your home lacks.
You can check an inspector's or contractor's license on the DBPR license search at myfloridalicense.com.
How much does a wind mitigation inspection cost and how much can it save?
Cost: inspections are priced by private inspectors, and no agency sets or reports a standard fee. Many inspectors bundle a wind mitigation with a 4-point inspection for buyers. Get a written quote. If you qualify for My Safe Florida Home when it is accepting applications, the program's initial hurricane mitigation inspection is free (see below).
Savings: it depends on your insurer's filed rates, your county, the wind share of your premium and the features you have. We could not find a neutral, current statewide figure, and the OIR's new discount tables were still pending separate rulemaking when the 2026 form took effect. The Department of Financial Services has estimated that grant-funded My Safe Florida Home improvements saved homeowners up to $1,000 on premiums. Treat any "save up to X%" ad with caution.
The reliable way to know: ask your agent to run your policy twice, once with your current features and once with the features you are considering. Insurers must show available discounts on a form at every renewal, so you can also compare that notice against your report.
How long is a wind mitigation report valid?
The form itself says it is valid for up to five years, provided no material changes have been made to the structure and no inaccuracies are found. A reroof is a material change, so get a new inspection afterward. When you buy a home, the seller's form can often be used: Citizens' guide says that for a new purchase, the form may be in the name of and signed by the prior owner, as long as the address matches the policy.
Wind mitigation vs. 4-point inspection: what's the difference?
| Wind mitigation (OIR-B1-1802) | 4-point inspection | |
|---|---|---|
| Purpose | Earn wind premium credits | Show the insurer the condition of the roof, electrical, plumbing and HVAC |
| Required? | Optional, but you lose credits without it | Often required for older homes; Citizens requires it for applications on homes more than 20 years old |
| Form set by | OIR rule | Insurer (Citizens has its own form many carriers accept) |
| Proves roof condition? | No | Yes, includes roof age and remaining life |
| Valid for | Up to 5 years if no material changes | Set by the insurer |
Do condos get wind mitigation discounts?
Yes, but usually through the building. Condo associations insure the building, including the roof, under a commercial residential policy. The 1802 form is designed for dwellings with 1 to 4 units, and Citizens uses separate mitigation verification forms for larger building types (for example, its Building Type II and III form). Citizens also flagged that the 2026 form revision affects Commercial Residential Type I buildings. If you are on a condo board, ask the association's agent which form applies and whether a mitigation inspection has been done recently.
Unit owners typically do not get roof credits on their own HO-6 policy, though features like impact windows the owner installed may matter. Ask your agent.
How wind mitigation ties into My Safe Florida Home
The My Safe Florida Home (MSFH) program, run by DFS under s. 215.5586, starts with a free hurricane mitigation inspection done by an inspector working for a DFS-contracted wind certification entity. The report must summarize results, recommend improvements, give a range of cost estimates and estimate premium discounts. If you qualify, a grant can then help pay for recommended roof improvements: stronger roof-deck attachment, reinforced roof-to-wall connections, and secondary water resistance together with replacing the roof covering. Those are the same features the 1802 form rewards.
Funding depends on the Legislature each year, and eligibility is limited to owner-occupied homestead homes built before 2008 and to low- and moderate-income applicants. See our full My Safe Florida Home guide.
How to choose a provider
- Find any existing OIR-B1-1802 form for your home and check its date and version.
- Ask your agent which mitigation credits you have now and what each missing feature would be worth.
- Hire a qualified inspector from the s. 627.711(2) list and confirm the license on myfloridalicense.com.
- Make sure the inspection uses form OIR-B1-1802 (Rev. 04/26) if it is done on or after April 1, 2026.
- Before a reroof, put deck renailing (nail type and spacing) and SWR into the contract as line items.
- Ask the roofer to photograph every slope after deck nailing and after SWR, before the covering goes on.
- Get the permit number, final inspection date and product approval number after the job.
- Schedule a new wind mitigation inspection after the final permit inspection and give the inspector your photos.
- Send the new form to your agent and compare the next renewal's credits.
- Keep a copy of the form and documentation with your policy, as the form instructs.
Related roofing guides
- 4-Point Inspection vs Roof Certification in Florida: What Do Insurers Want?
- My Safe Florida Home: Can a Grant Pay for Your New Roof?
- Florida's 15-Year Roof Rule: Can Your Insurer Drop You for an Old Roof?
- What's Under Your Shingles: Decking, Underlayment, Secondary Water Barrier and Ventilation Explained
- Florida Building Code for Roofs: HVHZ, Miami-Dade NOAs, and the 2026 9th Edition Changes
- Citizens Property Insurance and Your Roof: What Are the Eligibility, Inspection and Depopulation Rules?
- How Much Does a New Roof Cost in Texas and Florida? (What Actually Drives the Price)
Roofing by state and city
Questions people ask
What is the OIR-B1-1802 form?
It is Florida's Uniform Mitigation Verification Inspection Form, created by the Office of Insurance Regulation and adopted by rule. Qualified inspectors use it to record a home's wind-resistance features, such as roof covering, deck attachment, roof-to-wall connections, roof shape, secondary water resistance and opening protection. Insurers must accept it when properly signed and use it to apply wind mitigation credits. The current version is Rev. 04/26, required for inspections on or after April 1, 2026.
Does a hip roof get a bigger discount than a gable roof?
Usually, yes. On the form, a hip roof means non-hip features such as gables make up no more than 10 percent of the roof's total perimeter. Hip roofs resist wind uplift better, so insurers' filed rates generally give them a credit that gable or mixed roofs do not receive. The exact amount depends on your insurer. Citizens says a hip roof credit alone can be supported with clear photos instead of a full inspection.
What is secondary water resistance (SWR) on a roof?
SWR is a backup water barrier under the roof covering that keeps rain out if the shingles or tiles blow off. On the wind mitigation form, it means a self-adhering modified bitumen underlayment applied directly to the deck, deck seams taped with a qualifying self-adhering strip, two layers of qualifying underlayment, or properly applied spray foam. Ordinary felt does not count. Florida requires a secondary water barrier when a site-built single-family roof is replaced.
What do 8d nails at 6 inches mean on the wind mit form?
It describes how the roof sheathing is fastened. 8d is a nail size. Answer C on the deck attachment question means 8d common nails spaced no more than 6 inches apart in the field of each panel, which the form ties to an uplift resistance of at least 182 pounds per square foot. That is the strongest common wood-deck answer. Older homes often have staples or 6d nails, which only meet answer A.
Should I ask my roofer to add SWR during a re-roof?
For a site-built single-family home, Florida law already requires a secondary water barrier and improved deck attachment when the roof is replaced. What you should ask for is proof: the product name, the method used, and dated photos of every slope before the covering goes on. Without that, the next wind mitigation inspector may not be able to verify it from the attic, and you could miss the credit.
Can I do my own wind mitigation inspection?
No. Only the qualified inspectors listed in s. 627.711(2) can sign the form, such as trained licensed home inspectors, building code inspectors, licensed general, building or residential contractors, engineers and architects. Insurers may also recognize others. You do sign a homeowner section confirming the inspector performed the inspection and showed identification.
Will the 2026 form lower my premium?
Not automatically. Citizens told agents the new form's changes would not change the credits it applies for now, and new discount tables were left for separate OIR rulemaking. If your home has features the old form could not capture, such as a FORTIFIED certificate, the new form documents them, which may matter once new tables take effect. Ask your agent before paying for a fresh inspection if your old form is less than five years old.
Does a wind mitigation inspection check for roof damage?
No. The inspector documents construction features, not condition. Citizens says the form is not acceptable proof of roof condition or replacement. If an inspector notices damaged openings, the form has an answer for that, which can cost you opening protection credits. For roof condition, insurers rely on a 4-point or roof inspection form.
Sources
- OIR-B1-1802 (Rev. 04/26) Uniform Mitigation Verification Inspection Form, redline copy via Insurance Journal
- Florida Administrative Register notice adopting the revised form (Rule 69O-170.0155)
- Citizens: Uniform Mitigation Verification Inspection Form Changes (Mar. 19, 2026)
- Citizens: Wind Loss Mitigation Guide for OIR-B1-1802 (Rev. 04/26)
- Radey Law: OIR adopting updated mitigation discount form (Oct. 2025)
- Fla. Stat. s. 627.0629 (2026)
- Fla. Stat. s. 627.711 (2026)
- Fla. Stat. s. 553.844, Windstorm loss mitigation; roofs (2026)
- Fla. Stat. s. 215.5586, My Safe Florida Home Program (2026)
- Citizens: Inspections
- IBHS FORTIFIED Roof
- The Capitolist: Home hardening program quickly fills up (DFS savings estimate)
- DBPR license search and construction licensing
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


