Local Guide · Roofing
How Much Does a New Roof Cost in Texas and Florida? (What Actually Drives the Price)
Two credible data sets give very different answers, and both are right for what they measure. Here is how to read them, what Florida's code and Texas hail add to the bill, and how to tell if your quote is fair.
A full asphalt shingle tear-off on a typical home ran about $27,500 in Houston, $28,200 in Dallas, $33,400 in Jacksonville and $39,700 in Miami in the 2025 Cost vs. Value report, which prices a large, complete benchmark job. Contractor-sourced averages are lower: Fixr's 2026 data puts a typical replacement at $7,500 to $14,000, or $3.75 to $11 per square foot of roof. Your price depends on roof area, pitch, material, tear-off layers, decking repairs and local code.
Key facts
- 2025 Cost vs. Value: asphalt shingle roof replacement averaged $31,871 nationally and recouped 67.5% at resale; a metal roof cost $51,865 and recouped 50.1% (Zonda/JLC).
- 2025 Cost vs. Value metro figures for an asphalt shingle roof: Miami $39,729, Jacksonville $33,356, Dallas $28,211, Houston $27,519, San Antonio $22,966 (Zonda/JLC).
- Fixr's 2026 data: average roof replacement about $10,000, typical range $7,500 to $14,000, average $4.75 per square foot (range $3.75 to $11).
- Fixr: labor is 40% to 60% of a replacement; tear-off and disposal average $50 per square and can reach $150 per square for heavy tile or multiple layers.
- Florida requires every site-built single-family reroof to include a secondary water barrier and stronger roof-deck attachment (Fla. Stat. 553.844).
- In Florida's wind-borne debris region, homes insured or valued at $300,000 or more must also get roof-to-wall upgrades if gable ends or corners can be done for 15% of the reroof cost (Fla. Stat. 553.844).
- Construction input prices rose 6.2% in the first four months of 2026, more than the prior three years combined, per ABC's analysis of BLS data reported by Roofing Contractor.
- In Texas's TWIA area, most roof replacements need a windstorm inspection, and TDI does not regulate what inspectors charge (TDI).
What does a new roof cost in Texas and Florida right now?
There is no single honest number, because the two best public data sets measure different things. Read them side by side and the picture gets clear.
The Cost vs. Value report from Zonda and the Journal of Light Construction (JLC) is the most cited source for remodeling prices. Its 2025 edition says a full asphalt shingle roof replacement averaged $31,871 nationally and a metal roof averaged $51,865. Cost vs. Value builds its numbers from Bureau of Labor Statistics price indexes plus local building-cost data from Verisk's XactRemodel, the same family of pricing data many insurance adjusters use. It prices one fixed, complete benchmark job: a large roof, full tear-off, new underlayment and flashing. It is a good yardstick for a big, by-the-book job in a given city.
Contractor-sourced averages run much lower. Fixr's 2026 cost guide puts the average roof replacement at about $10,000, with most jobs between $7,500 and $14,000, and an average of $4.75 per square foot of roof (range $3.75 to $11). Fixr's material table assumes a 1,700-square-foot home with about 2,000 square feet of roofing. These numbers reflect what many homeowners are quoted for simpler, single-layer shingle jobs.
So which should you use? Use the Fixr-style range to sanity-check a quote on a plain, one-story shingle roof. Use the Cost vs. Value number as the upper reference point for a large roof, a two-story home, a coastal Florida job with code upgrades, or anything more complex. If your quote lands far above the Cost vs. Value figure for your city, ask why in writing. If it lands far below the Fixr low end, ask what is missing.
| Source | What it measures | Typical number |
|---|---|---|
| Zonda/JLC Cost vs. Value 2025 | Fixed benchmark job, full tear-off, local labor and material indexes | $31,871 national (asphalt); $51,865 (metal) |
| Fixr 2026 | Contractor and pricing-database averages for typical jobs | About $10,000; $7,500 to $14,000; $3.75 to $11 per sq ft |
What does a roof cost in Miami, Jacksonville, Houston, Dallas and San Antonio?
Cost vs. Value publishes city-level numbers. Here are the 2025 figures for the Texas and Florida metros it covers, along with how much of the cost the report estimates comes back in resale value.
| Metro (2025) | Asphalt shingle job cost | Resale value added | Recouped | Metal roof job cost | Metal recouped |
|---|---|---|---|---|---|
| Miami | $39,729 | $22,519 | 56.7% | $64,142 | 48.4% |
| Jacksonville | $33,356 | $21,547 | 64.6% | $50,900 | 54% |
| Dallas | $28,211 | $16,053 | 56.9% | $46,790 | 48.6% |
| Houston | $27,519 | $18,962 | 68.9% | $44,883 | 49.1% |
| San Antonio | $22,966 | $17,867 | 77.8% | $37,265 | 65% |
| South Atlantic region (includes Florida) | $32,253 | $22,535 | 69.9% | $50,181 | 56.5% |
| West South Central region (includes Texas) | $27,116 | $18,478 | 68.1% | $44,505 | 50.5% |
Two things stand out. First, the same benchmark job costs about 73% more in Miami than in San Antonio. Labor rates, insurance costs and South Florida's stricter code all play a part. Second, the regional figures are not state figures. The South Atlantic region covers several states, and the West South Central region covers several more.
We could not load city-level Cost vs. Value pages for Tampa, Orlando or Austin in a usable form. If you live there, use the regional figure and the Fixr ranges as your two reference points, and see our local pages for Tampa, Orlando and Austin.
How much does a roof cost per square foot, and what is a square?
Roofers price by the square, which is 100 square feet of roof surface. A 2,000-square-foot roof is 20 squares. Fixr's 2026 range of $3.75 to $11 per square foot works out to $375 to $1,100 per square.
The trap most people fall into is using the size of the house instead of the size of the roof. The roof is bigger than the floor plan for two reasons: overhangs, and slope. A sloped roof has more surface than the flat footprint under it. Estimators use a pitch multiplier to convert footprint to roof area. The formula is the square root of 1 plus (rise divided by 12) squared.
| Pitch (rise per 12 inches) | Multiplier | Roof area over a 2,000 sq ft footprint |
|---|---|---|
| 4/12 | 1.054 | About 2,108 sq ft (21.1 squares) |
| 6/12 | 1.118 | About 2,236 sq ft (22.4 squares) |
| 8/12 | 1.202 | About 2,404 sq ft (24.0 squares) |
| 10/12 | 1.302 | About 2,604 sq ft (26.0 squares) |
| 12/12 | 1.414 | About 2,828 sq ft (28.3 squares) |
The multipliers above come from Vertigraph's estimating guide. The footprint is the area under the roof including overhangs, not your heated living space. A two-story, 2,000-square-foot house may have only a 1,000-square-foot footprint, so its roof can be smaller than a one-story home of the same size.
Example: what does a roof cost on a 2,000-square-foot house? Take a one-story home with a 2,200-square-foot footprint including overhangs and a 6/12 pitch. The roof is about 2,460 square feet, or 24.6 squares. At Fixr's per-square-foot range, that is roughly $9,200 to $27,000 before any decking repairs. Fixr's own roof-size table lists $7,500 to $22,000 for a 2,000-square-foot roof and $9,375 to $27,500 for a 2,500-square-foot roof. Roofers also add waste, usually more on hip roofs than on simple gables. Our roof measurement guide walks through it step by step.
Does pitch change the price beyond area? Yes. Fixr notes that steeper roofs need harnesses or scaffolding, which slows the crew and raises labor cost. Complex roofs with hips, valleys and dormers take more flashing and cutting. Expect a steep or cut-up roof to cost more per square, not just more squares.
How much do shingles, metal and tile cost compared with each other?
Fixr's 2026 table gives total cost ranges for a roof of about 2,000 square feet. These are national figures, so treat them as relative, not as a Florida or Texas quote.
| Material | Fixr 2026 total range (about 2,000 sq ft roof) |
|---|---|
| Asphalt shingles (basic) | $6,000 to $10,000 |
| Architectural shingles | $8,000 to $32,000 |
| Concrete tile | $14,000 to $24,000 |
| Clay tile | $14,000 to $28,000 |
| Metal | $14,000 to $38,000 |
| Cedar shake | $10,000 to $30,000 |
| Slate | $20,000 to $60,000 |
How much more does tile cost than shingles? On Fixr's ranges, concrete tile starts at more than double basic shingles. In Florida the gap can be wider because tile installation is heavily regulated. Every underlayment used under tile in the High-Velocity Hurricane Zone (Miami-Dade and Broward) must have its own product approval under the 9th Edition Florida Building Code, and in the HVHZ those tile underlayments must also show tested uplift resistance. The 9th Edition is scheduled to take effect December 31, 2026, and Miami-Dade applies these underlayment rules to permits applied for on or after January 1, 2027. Tear-off is also heavier: Fixr says removal can reach $150 per square for concrete tile versus about $50 for one layer of shingles.
How much does a metal roof cost in Florida? Cost vs. Value's 2025 benchmark metal roof was $64,142 in Miami and $50,900 in Jacksonville, against $39,729 and $33,356 for shingles in the same cities. Metal is also the material most exposed to tariffs right now: an ABC economist quoted by NRCA said iron and steel prices were up 12.3% year over year in December 2025, and a large roofing distributor told Roofing Contractor in 2026 that the biggest price spikes were in metal roofing and flashing. Near the coast, the 2026 Florida code adds corrosion-resistance rules for fasteners and connectors within 3,000 feet of saltwater. See our metal roof guide and tile roof guide for performance trade-offs.
What is actually in a roof replacement price?
A complete quote should list each of these. If a line is missing, ask whether it is included or will be billed later.
- Tear-off and disposal. Fixr: about $50 per square including dump fees, up to $150 per square for heavy tile or multiple shingle layers.
- Decking (sheathing) replacement. Rotten or delaminated plywood is found only after tear-off. Fixr puts it at $2 to $8 per square foot. A good contract states a per-sheet price in advance.
- Underlayment and secondary water barrier. Standard felt is often included. Self-adhered membranes cost more. In Florida a secondary water barrier is mandatory on site-built single-family reroofs.
- Flashing, drip edge, vents and pipe boots. Reusing old flashing saves money now and often causes leaks later.
- Fascia, soffit and rafter repairs. Fixr: $500 to $2,500 for fascia and soffit; major rafter damage can add up to $5,000.
- Permit and inspection fees. Fixr: typically $100 to $500. Houston lists a $33.56 admin fee plus its schedule. San Antonio's handout lists $26.50, though the handout is undated, so confirm. Yes, roofers usually pull the permit and pass the fee through.
- Engineering, testing and certification. Some Florida jobs need uplift tests or engineered roof-to-wall work. Texas coastal jobs need a windstorm inspection for a WPI-8 certificate, and TDI does not regulate inspector fees.
- Solar panel removal and reinstall. Fixr: $500 to $2,000.
- Labor. Fixr says labor is 40% to 60% of the total. Labor price includes the contractor's workers' compensation and liability insurance. In Florida, a contractor must file proof of workers' comp and liability coverage to get or renew a license (Fla. Stat. 489.115). Very low bids sometimes come from crews that skip that coverage, which shifts risk to you.
Does tearing off a second layer cost extra? Yes. Fixr says multiple layers push removal toward the top of its range. In Florida you usually have no choice: the 2026 code keeps the rule that a roof with two or more existing coverings must be torn off to the deck. In Texas, ask your city building department whether a second layer is allowed on your house.
Why are roofs more expensive in Florida?
Florida roofs cost more mainly because Florida law requires more work on every reroof. These are the big cost drivers.
1. Mandatory reroof upgrades (Fla. Stat. 553.844)
For site-built single-family homes, a roof replacement must include a secondary water barrier (a sealed layer under the roof covering that keeps water out if shingles blow off) and improved roof-deck attachment (more and better nails into the plywood). In the wind-borne debris region, a home insured or valued at $300,000 or more must also get roof-to-wall connections improved, if the gable ends or all corners can be done for no more than about 15% of the reroof cost. These steps add labor and materials that a Texas inland job may not include. Our decking and underlayment guide explains each layer.
2. Product approvals
Roofing products must carry a Florida Product Approval or, in Miami-Dade and Broward, typically a Miami-Dade Notice of Acceptance (NOA). Approved products and approved installation methods narrow your choices and can cost more. See our Florida Building Code and HVHZ guide.
3. Inspections, testing and paperwork
Florida jobs usually need a recorded Notice of Commencement (required for most improvements over $2,500, and a copy must be filed with the permit office before the first inspection when the contract is over $5,000, under Fla. Stat. 713.13 and 713.135), a permit, in-progress inspections, and in the HVHZ, field tests such as tile bond tests. Each step takes crew time.
4. The 9th Edition Florida Building Code
The 2026 code (9th Edition) is scheduled to take effect December 31, 2026. Tampa says January 1, 2027, and Miami-Dade applies its new product rules to permits applied for on or after January 1, 2027. Changes that can raise cost include: product-approved, uplift-tested tile underlayment; wind-tested hip and ridge shingles in the HVHZ; more flashing locations; and corrosion-resistant fasteners within 3,000 feet of saltwater. In Florida the code edition in effect on the date of your permit application governs the job, so the application date matters.
5. Labor and demand
Cost vs. Value's 2025 Miami shingle benchmark ($39,729) is 44% higher than Houston's ($27,519) for the same job description, which points to labor, overhead and code costs rather than materials alone.
What drives roof prices in Texas?
Hail and storm surges in demand
Texas led the nation with 902 major hail events (hail 1 inch or larger) in 2025, according to Insurance Information Institute figures from NOAA's Storm Prediction Center. NOAA lists a May 27 to 28, 2024 hail event across north and east Texas, including Dallas and Houston, at about $2.3 billion. When thousands of roofs need replacing at once, crews and materials get scarce. Prices and wait times rise, and out-of-town crews arrive. See our guides to hail damage and storm chaser scams.
Impact-resistant (Class 4) upgrades
Many Texas owners choose shingles rated UL 2218 Class 4, the top class of a steel-ball impact test that simulates hail. They cost more than standard shingles. In return, many Texas insurers give a premium discount, but each insurer sets its own discount and paperwork rules, according to TDI. For the TWIA discount, the product must be labeled with its UL 2218 class, and the contractor fills out TDI Form PC068 after installation. Ask your insurer for the discount amount in writing before you decide. Keep in mind that IBHS lab testing found real-world hail performance varies a lot among Class 4 products.
Coastal windstorm certification
In the 14 TWIA counties and part of Harris County east of Highway 146, most roof replacements need a windstorm inspection and a certificate of compliance (WPI-8) to keep TWIA coverage. A certificate issued after the work is done (WPI-8-E) requires an engineer's post-construction inspection and may cost more than inspections during construction. TDI does not regulate these fees. See our WPI-8 guide.
City permits
Texas permits are set city by city. Dallas requires a residential roofing permit when the work exceeds $500. Houston requires a residential roofing permit with a re-roof worksheet. Austin exempts many like-for-like reroofs from a building permit. Permit fees are a small part of the total, but they are real. See our permit guide.
Are prices higher after a hurricane or hail storm, and when is the cheapest time to replace a roof?
Prices tend to rise after big storms because demand jumps faster than the supply of crews and materials. We found no public index that measures post-storm roofing price changes in Texas or Florida, so be wary of anyone quoting a precise percentage. What you can do is protect yourself: get at least three written bids, and never sign on the spot after a door knock.
Texas's Deceptive Trade Practices Act (Bus. and Com. Code 17.46(b)(27)) bans charging exorbitant or excessive prices for building materials and other necessities during a declared disaster, and the Texas Attorney General takes price-gouging complaints. In Florida, if you sign a roof contract within 180 days after a declared emergency, you can cancel without penalty within 10 days of signing or by the official start date, whichever comes first (Fla. Stat. 489.147).
Cheapest time of year: Fixr says roofing demand drops in fall and winter, which can bring lower labor costs and faster scheduling. In Texas, that means before spring hail season. In Florida, the months after hurricane season (which runs June through November) are often a better bet than the peak of the rainy season, but a storm anywhere in the state can tighten the market.
Why did my roofer's price go up after the quote?
Usually for one of three reasons: material costs moved, the scope changed after tear-off, or the quote had expired.
- Material prices. Construction input prices rose 1.7% in April 2026 alone and 7% over the prior year, per an Associated Builders and Contractors analysis of BLS data. ABC's chief economist said prices rose more in the first four months of 2026 than in the prior three years combined, driven by oil prices and tariffs on iron, steel and imported products. A large roofing distributor said imported nails and underlayments, plus metal roofing and flashing, were hit hardest. On the other hand, an ABC economist said in early 2026 that asphalt prices, which are less exposed to tariffs, were likely to stay tame.
- Short price windows. The same distributor said contractors typically honor pricing for only about 30 days. If your quote says it is valid for 30 days and you sign on day 45, expect a revised price.
- Hidden damage. Rotten decking or rafters show up only after tear-off. That is why your contract should set a per-sheet price for decking and require photos before extra work.
Read your contract's price-change and change-order clauses before you sign. A fair contract says how changes are priced and requires your written approval. Our roofing contract checklist lists the clauses to look for.
Who pays for code upgrades: you, your insurer or a grant?
If your roof is being replaced because of a covered insurance claim, some code-required upgrades may be covered.
- Florida: Under Fla. Stat. 626.9744, an insurer may not make you pay for betterment required by ordinance or code beyond your deductible, unless your policy specifically excludes or limits it. Look for the "law and ordinance" or "ordinance or law" section of your policy. See Florida's matching law.
- Texas: TDI lists extra construction or repair costs to meet local building codes as a common policy add-on (endorsement). If you don't have it, code upgrades may come out of your pocket.
- My Safe Florida Home: This state grant program can pay $2 for every $1 you spend, up to $10,000 in state money, for eligible upgrades including roof-to-wall connections, deck attachment and a secondary water barrier with a new roof covering. It is a reimbursement program that depends on yearly funding from the Legislature, so check whether it is open. See our My Safe Florida Home guide.
For storm claims, keep in mind that both states require you to pay your deductible. A contractor who offers to waive it is breaking the law in Texas (Bus. and Com. Code 27.02) and in Florida (Fla. Stat. 489.147).
Does a new roof pay for itself when you sell?
Not fully, but it recovers more than most remodeling projects. Cost vs. Value 2025 says an asphalt shingle roof recoups about 67.5% of its cost at resale nationally, and a metal roof about 50.1%. Locally, the estimate ranges from 56.7% in Miami to 77.8% in San Antonio for shingles. The resale figures come from a survey of more than 6,000 real estate agents, so they are opinions of value, not sale-price data.
In Texas and Florida the bigger payoff is often insurability. Many Florida insurers look closely at roof age, and Citizens Property Insurance has specific age limits. A new roof can also qualify for wind mitigation or impact-resistance discounts. See our guides on the Florida 15-year roof rule, wind mitigation inspections and selling with an old roof.
How do I compare roof quotes fairly?
- Ask every bidder for the same roof area in squares and the waste factor they used. If one bid is 24 squares and another is 31, someone measured wrong.
- Name the exact products: shingle line, underlayment, secondary water barrier, ice-and-water or self-adhered membrane, drip edge, vents, and the Florida Product Approval or NOA numbers in Florida.
- Get unit prices for surprises: price per sheet of decking, per linear foot of fascia, per extra layer.
- Confirm who pulls and pays for the permit, inspections, and any windstorm or engineering certificate.
- Check the license: Florida roofers must hold a state license you can verify with DBPR. Texas has no state roofing license, so check city registration, insurance and references. See our contractor guide.
- Compare warranties on both materials and workmanship. See our warranty guide.
- Read the price-change clause and the quote's expiration date.
For a line-by-line walkthrough, see how to read a roofing estimate.
How to choose a provider
- Find your roof area in squares, not your home's square footage.
- Look up the 2025 Cost vs. Value figure for your metro or region as an upper reference.
- Use Fixr's $3.75 to $11 per square foot range as a lower reference for a simple shingle roof.
- Get at least three written, itemized bids for the same scope and products.
- Ask for a per-sheet decking price and photo proof before any extra charges.
- In Florida, confirm the bid includes the secondary water barrier, deck renailing and any required roof-to-wall work.
- In the Texas TWIA area, confirm who arranges and pays for the WPI-8 windstorm inspection.
- Ask your insurer in writing what discount a Class 4 or wind-rated roof would earn.
- Check whether your policy covers code upgrades (law and ordinance coverage).
- In Florida, check whether My Safe Florida Home is accepting applications before you sign.
- Note the quote's expiration date and the contract's price-change clause.
- Never let a contractor waive or absorb your insurance deductible.
Related roofing guides
- Roof Repair Costs: Leaks, Flashing, Shingles, Tiles, and Flat Roof Patches
- How to Compare Roofing Quotes Apples-to-Apples (With a Line-Item Checklist)
- How to Measure a Roof and Estimate Squares (With Pitch Multipliers)
- Florida Building Code for Roofs: HVHZ, Miami-Dade NOAs, and the 2026 9th Edition Changes
- Do I Need a Permit to Replace My Roof? Texas and Florida City-by-City Basics
- My Safe Florida Home: Can a Grant Pay for Your New Roof?
- Hail Damage on Your Roof: How to Spot It, Prove It, and Claim It in Texas
- Metal Roofs: Standing Seam vs Exposed Fastener, Gauges, Coastal Metals, Costs and Myths
Roofing by state and city
Questions people ask
How much does a new roof cost in Florida?
For a full asphalt shingle tear-off, the 2025 Cost vs. Value report put the benchmark job at $39,729 in Miami and $33,356 in Jacksonville, and a metal roof at $64,142 and $50,900. Contractor-sourced national averages are lower, about $7,500 to $14,000 for a typical job per Fixr's 2026 data. Florida jobs often land higher than national averages because state law requires a secondary water barrier and stronger deck nailing on every single-family reroof, and South Florida adds stricter product approval and testing rules.
How much does a new roof cost in Texas?
The 2025 Cost vs. Value benchmark for an asphalt shingle replacement was $27,519 in Houston, $28,211 in Dallas and $22,966 in San Antonio. Metal roofs ran $37,265 to $46,790 in those cities. Simpler single-layer shingle jobs are often quoted closer to Fixr's 2026 range of $7,500 to $14,000. Class 4 impact-resistant shingles, steep pitches, extra layers and coastal windstorm certification all push the price up.
How much is a roof on a 2,000 square foot house?
It depends on the roof's area, not the house's. A one-story 2,000-square-foot home with overhangs and a 6/12 pitch may have about 2,400 to 2,500 square feet of roof. At Fixr's 2026 range of $3.75 to $11 per square foot, that is roughly $9,000 to $27,000 before decking repairs. A two-story home of the same size has a smaller roof. Ask each bidder for the measured squares.
Do roofers charge for permits and engineering?
Usually yes, as a pass-through. Fixr puts permit costs at $100 to $500 in most cities. Houston lists a $33.56 admin fee plus its fee schedule. Florida jobs can add Notice of Commencement recording, product testing or engineering for roof-to-wall upgrades. Texas coastal jobs add a windstorm inspection, and TDI does not regulate those fees. Ask that each item be listed separately in the bid.
Is a metal roof worth the extra cost in Florida?
It can be, if you plan to stay a long time. Cost vs. Value shows metal costs about 60% more than shingles in Miami and recoups a smaller share at resale (48.4% versus 56.7%). Metal's case rests on long life, wind performance and possible insurance discounts. Metal prices are also the most exposed to tariffs right now, so get a firm price with a clear expiration date.
Why is my quote so much lower than the Cost vs. Value number?
Cost vs. Value prices one large, complete benchmark job using local labor and material indexes. Your roof may be smaller, simpler or a single layer. A low quote is fine if it includes the same scope. Check that it lists underlayment, flashing, drip edge, ventilation, permit, disposal and a decking allowance. In Florida, also confirm the code-required secondary water barrier and deck renailing are included.
Will insurance pay for my new roof?
Only if a covered event such as wind or hail damaged it. TDI notes insurers won't pay for a roof just because it is old or worn. Replacement cost policies usually pay in two checks, and actual cash value policies subtract depreciation. You must pay your deductible in both states. See our guides on storm claims and on ACV versus RCV coverage.
Can I save money by laying new shingles over old ones?
Sometimes outside Florida, if local code and the manufacturer allow it, because you skip tear-off and disposal. But you lose the chance to inspect and fix the deck, and many shingle warranties and insurers prefer a tear-off. In Florida, the code requires tear-off when there are already two coverings or the roof is wet or deteriorated, and the mandatory reroof upgrades require access to the deck anyway.
Does a Class 4 roof lower my Texas insurance?
Often, but not by a set amount. TDI says each insurer sets its own impact-resistant roofing discount and paperwork rules. TWIA requires the UL 2218 class on the product label and a contractor-signed Form PC068. Ask your agent for the discount in writing, and compare it with the extra cost of the shingles over the years you expect to own the home.
Sources
- Zonda/JLC: Cost vs. Value Report 2025, National
- Zonda/JLC: Cost vs. Value 2025 Methodology
- Zonda/JLC: Cost vs. Value 2025, South Atlantic
- Zonda/JLC: Cost vs. Value 2025, West South Central
- Zonda/JLC: Cost vs. Value 2025, Miami, FL
- Zonda/JLC: Cost vs. Value 2025, Jacksonville, FL
- Zonda/JLC: Cost vs. Value 2025, Houston, TX
- Zonda/JLC: Cost vs. Value 2025, Dallas, TX
- Zonda/JLC: Cost vs. Value 2025, San Antonio, TX
- Fixr: How Much Does a Roof Replacement Cost? (2026 data)
- Vertigraph: How to calculate roofing squares (updated May 11, 2026)
- Fla. Stat. 553.844 (2026): Windstorm loss mitigation; roofs
- Fla. Stat. 713.135 (2026): Notice of commencement and applicability of lien
- Fla. Stat. 489.115 (2026): Certification and registration
- Fla. Stat. 489.147 (2026): Prohibited property insurance practices
- Fla. Stat. 626.9744 (2026): Claim settlement practices relating to property insurance
- Fla. Stat. 215.5586 (2026): My Safe Florida Home Program
- Florida Building Commission: 2026 FBC Workplan (June 2026)
- City of Tampa: New Florida Building Code 9th Edition announcement
- Greenberg Traurig: New Florida Building Code Edition Takes Effect Dec. 31, 2026 (Nov. 2026)
- Miami-Dade RER Product Control: 9th Edition FBC roofing underlayment memo
- FRSA: Changes in the 2026 9th Edition of the Florida Building Code
- Roofing Contractor: Roofing Contractors Shorten Pricing Windows Amid New Construction Cost Surge (2026)
- NRCA: Construction material prices fell in December 2025, were up for the year (Feb. 3, 2026)
- Insurance Information Institute: Facts + Statistics: Hail
- NOAA NCEI: Billion-Dollar Weather and Climate Disasters, Texas summary
- TDI: Roofing discounts (company guidance)
- TDI: What you need to know about windstorm inspections
- TDI: Homeowners insurance guide (cb025)
- TDI: Insurance and your roof (updated 4/1/2026)
- IBHS: Relative Impact Resistance of Asphalt Shingles (2014)
- Houston Permitting Center: Residential Roofing Permit (HPWCODE1140)
- City of Dallas Development Services guide
- City of San Antonio DSD: Home Remodeling handout (undated)
- Tex. Bus. and Com. Code ch. 27
- Tex. Bus. and Com. Code ch. 17 (DTPA)
- Texas Attorney General: Disaster and emergency scams
- Fla. Stat. 713.13 (2026): Notice of commencement
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


