Local Guide · Roofing
Tile Roofs in Florida: Is It the Tile or the Underlayment, and What Do Re-Roofs Involve?
Why Florida tile roofs usually fail at the underlayment, when tiles can be reused, how foam, mortar and fastened tile compare, the 2026 code changes, TAS 106 uplift tests, insurance age rules and HOA rights.
On most Florida tile roofs the underlayment, not the tile, is what wears out and leaks. Concrete tile is estimated to last 30 to 50 years and clay longer, and existing undamaged tile can often be reinstalled over new underlayment. Re-roofs must meet current code, which from late 2026 requires product-approved, uplift-tested underlayment in the HVHZ. Private insurers apply the 15-year roof-age rule to tile; Citizens uses 50 years.
Key facts
- Tile is not watertight; the underlayment is the main waterproof layer (JLC).
- Concrete tile estimates run 30-50 years; clay is more durable and colorfast; concrete costs about half as much (JLC).
- Florida allows undamaged existing or like-kind salvaged tile to be reinstalled on an existing tile roof (FBC-Existing Building 706.5).
- HVHZ adhesive-set and mortar-set tile roofs must pass a TAS 106 field uplift test before final inspection.
- Under the 9th Edition HVHZ rules, every tile underlayment needs product approval with uplift values tested to FM 4474 or UL 1897.
- The 2026 FBC removes prescriptive yellow-stripe underlayments in the HVHZ and requires tile fasteners to penetrate the sheathing or at least 3/4 inch.
- Code-compliant clay and concrete tile systems are deemed to meet Florida's secondary water barrier rule on re-roofs.
- Citizens uses a 50-year age threshold for tile; private insurers use the 15-year inspection rule in s. 627.7011.
- Fla. Stat. s. 720.3035(6) bars HOA boards from denying hurricane protection, including code-recognized roof systems meeting ASCE 7-22, that conforms to board specifications.
Is it the tile or the underlayment that fails?
On most Florida tile roofs, it is the underlayment. Tile sheds most water, but it is not watertight. A JLC installation article puts it directly: roof tiles "are not completely waterproof; in a driving rain, some water is likely to get past them," and the layer underneath "is the most important waterproof layer on a tile roof."
The tile itself lasts a long time. JLC reports estimates of 30 to 50 years for concrete tile and notes that fired clay does not degrade from weather. InterNACHI lists clay and concrete roofs at 100+ years. NRCA figures published by the U.S. Forest Service give tile about 50 years, depending on quality and climate.
The underlayment (felt, a two-ply hot-mopped system, or a self-adhered "peel and stick" membrane) sits in a hot, dark space under the tile. It ages from heat, from water that gets past the tile, and from nail holes and foot traffic. We found no independent, published lifespan for tile underlayment in Florida. Contractors' estimates vary widely. The best guide for your roof is the underlayment manufacturer's warranty term, the product approval for the system, and an inspection of what is actually happening on your roof.
Signs the underlayment is failing
- Leaks or ceiling stains, especially near valleys, walls, chimneys and pipes.
- Dark, brittle, cracked or torn felt visible at the eaves or where a tile is lifted.
- Rotted fascia or deck edges.
- Repeated repairs in different places on the same roof.
Cracked or slipped tiles let more water reach the underlayment, so replace broken tiles promptly even if nothing leaks yet.
Can you replace the underlayment and reuse the tiles?
Often yes. This is called a tile "lift and relay" or "re-lay." The crew removes the tile, replaces the underlayment and flashing, and reinstalls the old tile plus new or salvaged pieces to replace breakage.
What the code says
- Florida's Existing Building Code allows existing or salvaged slate, clay or concrete tile to be reinstalled to repair an existing tile roof, but salvaged tile must be "of like kind in both material and profile," and damaged, cracked or broken tile may not be reinstalled.
- Rusted, damaged or deteriorated vent flashing, metal edging, drain outlets, collars and counterflashing may not be reinstalled.
- The building official may allow salvaged tile on additions and new construction only if it is tested and installed to the code's tile sections (HVHZ sections in Miami-Dade and Broward).
- Florida's code defines roof replacement as removing the existing roof covering, repairing damaged substrate and installing a new covering, so building departments generally permit a full re-lay as a re-roof, and the current code applies: tested underlayment, current flashing rules, the deck renailing schedule and current fastening or adhesive methods for the tile.
When reuse makes sense
- The tile is in good shape, the profile and color are still available for replacements, and the deck is sound.
- Your HOA wants the look kept.
When it may not
- High breakage on removal (common with older or brittle tile), which means buying many replacement tiles that may not match.
- Very old concrete tile with heavy erosion.
- Your insurer will not treat a re-lay as a new roof for age purposes. Florida law measures roof age from the last time 100% of the roof surface was built or replaced to the code in effect. Ask your insurer in writing how it will treat a re-lay before you sign, and keep the permit and final inspection.
Foam-set vs mortar-set vs mechanically fastened tile
| Method | How it works | Record in hurricanes | What to ask |
|---|---|---|---|
| Mortar-set | Tile bedded in cement mortar | Weakest. JLC reported that FEMA's 2004 hurricane teams found mortar-set blow-off areas typically much larger, and FEMA's coastal guide recommended against mortar-set tile in high-wind areas | If an old roof is mortar-set, budget for a different method at re-roof |
| Foam adhesive (polyurethane) | Tile set on pads of one- or two-component foam | JLC reported properly foamed tiles withstood Hurricane Charley at Port Charlotte; failures traced to too little foam or foam in the wrong spots | Is the installer factory-trained and certified on this adhesive? Which paddy size and placement does the approval require? |
| Mechanical (nails, screws, clips) | Fasteners through the tile into the deck or battens | Good when the right number and type of fasteners are used; failures traced to too few or wrong fasteners | How many fasteners per tile, what type, and are eave and rake tiles clipped? |
Foam adhesive approval issues
Foam adhesives must be installed exactly as their product approval says. An FRSA article by an adhesive maker's representative explains that roof tile adhesive approvals require installers to be factory trained and certified, and that in the HVHZ both the adhesive and each tile system need a Miami-Dade NOA, with the adhesive listed with uplift values in the tile NOA. The same author reports that adhesive amounts were historically listed in grams, which is hard to check on a roof, and that Miami-Dade has begun publishing foam contact area in tile NOAs as they are revised, with proposals for the 2026 code cycle to add contact-area measurement to lab uplift testing. In plain terms: the amount and placement of foam under each tile is what holds it on, so inspectors and owners need a way to check it.
Single-component foams cure with moisture and expand only slightly. Two-component foams are mixed at the gun and expand three to four times. Both are permitted when installed to their approvals. The added cost of adhesive is in the 3% to 5% range of a typical tile roof's total cost, according to that FRSA author, who represents an adhesive brand.
What is a tile uplift test (TAS 106)?
In the HVHZ, the Florida Building Code requires a field verification and static uplift test, under Testing Application Standard (TAS) 106, on every adhesive-set and mortar-set tile roof after installation and before final inspection, to confirm the tile is bonded to the underlayment. The building official may also require it on mechanically fastened tile. Results go to the building department.
The code treats TAS 106 as a quality-control check of the installed work, separate from the lab tests used to approve the system. For adhesive or mortar-set tile, the HVHZ code also limits loose tiles: no more than two per roofing square (100 square feet), and no two loose tiles next to each other.
If you are re-roofing in Miami-Dade or Broward, ask who performs the uplift test and whether its cost is in the bid. Keep the results with your permit records. Outside the HVHZ, ask the building department whether it requires field testing.
Florida's 2026 tile code changes (9th Edition)
The 9th Edition (2026) Florida Building Code takes effect December 31, 2026, according to the Florida Building Commission. The City of Tampa's notice uses January 1, 2027, and Miami-Dade applies its new product rules to permits applied for on or after January 1, 2027. The code in effect on your permit application date governs the job. Key tile changes, as summarized by FRSA and Miami-Dade:
- Underlayment must be tested for uplift. In the HVHZ, every underlayment used in a tile system must be tested to TAS 110, TAS 103 and TAS 104 (unless a RAS says otherwise), uplift-tested to FM 4474 or UL 1897, and the uplift value must be in the product approval.
- No more prescriptive "yellow stripe" underlayment in the HVHZ. Miami-Dade says the 9th Edition removes the allowance for prescriptive underlayments; all tile underlayments need product approval and must show uplift resistance for ASCE 7 component and cladding loads.
- Performance-based HVHZ standards. RAS 118, 119, 120 and 127 were rewritten to remove many prescriptive methods. RAS 127 now has tables (for 175 mph, Risk Category II, gable and hip roofs, Exposure C and D) for the uplift resistance the underlayment must meet. Calculations outside the tables need a Florida engineer or architect's seal.
- Tile fasteners must penetrate through the sheathing or at least 3/4 inch into it, even when battens are used.
- Drip edge is required at eaves and gables of steep-slope tile roofs per the FRSA/TRI Florida High Wind Concrete and Clay Roof Tile Installation Manual, Seventh Edition.
- Corrosion. New Section 1711 sets corrosion resistance for fasteners and connectors near saltwater (nails within 3,000 feet, screws within 300 feet; HVHZ fasteners within 3,000 feet).
FRSA notes ASCE 7-22 wind loads are unchanged in this edition, so the tile manual's tables do not change. The 8th Edition (2023) had already required tile underlayment to be uplift-tested to FM 4474 or UL 1897 statewide, and had eliminated the old prescriptive two-ply hot-mop option with enhanced nailing outside the HVHZ unless it was tested and listed in a current approval.
Secondary water barrier and deck nailing on a tile re-roof
When a Florida home's roof covering is removed and replaced, the code requires roof-deck attachment to be brought up to its renailing table and a secondary water barrier to be installed. Two points are tile-specific:
- Clay and concrete tile systems installed as the Florida Building Code requires are "deemed to comply" with the secondary water barrier rule, because the tested tile underlayment serves that role.
- An existing self-adhered underlayment can stay if deck renailing can be confirmed, with an approved two-ply system installed over it per the FRSA/TRI manual.
IBHS's FORTIFIED checklist calls for roof sheathing at least 15/32 inch thick for new tile roofs (thicker if the tile maker requires). See decking, underlayment and ventilation.
How much does it cost to re-roof a tile house in Florida?
We could not find a neutral, dated published cost for tile re-roofs in Florida. The national Cost vs. Value report covers asphalt and metal only (2025 Miami: $39,729 shingles, $64,142 metal). Tile jobs vary more because of what has to happen:
- Removing tile (and storing it, if it will be reused).
- Replacement tile for breakage or a full new tile roof.
- Tested underlayment (two-ply or self-adhered) and new flashing, drip edge and metal.
- Deck renailing, and replacing rotted decking.
- Hip and ridge nailers and fasteners or adhesive per the approval.
- Permit, product approvals, and in the HVHZ the TAS 106 uplift test.
- Engineering if the structure or attachment is outside the tables.
Get at least three written bids that list the underlayment product and approval number, the attachment method, how broken tile will be replaced, and who pays for hidden deck damage per sheet. Our estimate comparison guide explains how to line them up. If you qualify, My Safe Florida Home can help with eligible mitigation when funded.
Why won't my insurer cover my 20-year-old tile roof?
Tile looks durable, so this surprises owners. Here is how the rules work:
- Private insurers may not refuse to issue or renew solely because a roof is under 15 years old. For roofs 15 or older, they must let you get an inspection by an authorized inspector, at your cost, and may not refuse solely for age if it shows at least 5 years of remaining useful life (s. 627.7011). The law does not give tile a longer age limit. An inspector who sees aging underlayment may not certify 5 years.
- Citizens uses 50 years for tile, slate, clay, concrete and metal before it requires proof of remaining useful life, and 25 for shingles. Citizens bases roof age on the oldest part when the roof was not all replaced at once.
- Condition, not age: any insurer can decline a roof in poor condition, such as many cracked tiles or active leaks.
What to do: get a roof inspection by a licensed roofing contractor or another authorized inspector that documents remaining life, fix broken tiles and flashing first, and shop carriers through an independent agent. If your roof is near the end of its underlayment life, a planned re-roof may cost less than a forced one. See the 15-year rule, Citizens requirements and the 4-point and roof inspection guide.
Can I walk on a tile roof? Where can I find matching tile?
Walking
Avoid it. Tile can crack under a person's weight, and JLC notes fired clay is "relatively easy to break." Cracks may not show until the next rain. Even roofers spread weight carefully and replace any tile they break. If you need gutters cleaned, a dish moved or a solar inspection, ask whether the worker is experienced on tile, and look for cracked pieces afterward. Never walk a wet tile roof. See DIY roof safety.
Matching tile
- Check the tile's maker and profile name (often on the underside). Ask the maker or a distributor whether it is still made.
- Salvage yards and roofers who strip tile roofs often keep stock of older profiles. The code allows salvaged tile for repairs if it is of like kind in material and profile and not damaged.
- Keep a few spare tiles from any re-roof in a dry, protected place.
- For an insurance claim, Florida's matching statute requires the insurer to make reasonable repairs or replacement in adjoining areas when replaced items don't match in quality, color or size, unless the policy says otherwise. See Florida's roof matching law.
Can I switch from tile to shingles or metal in my HOA?
It depends on your HOA's governing documents, but Florida law gives owners some leverage.
- Under s. 720.3035(6), Florida Statutes, every homeowners' association board must adopt hurricane protection specifications, and "hurricane protection" includes roof systems recognized by the Florida Building Code that meet ASCE 7-22. The board may not deny an application for hurricane protection that conforms to those specifications. It may require you to follow an existing unified building scheme for exterior appearance.
- An HOA cannot enforce a restriction that is inconsistent with the declaration or published guidelines (s. 720.3035(5)).
- Condominiums are governed by Chapter 718, not 720, and roofs are usually common elements maintained by the association.
Practical steps: request the architectural guidelines and the hurricane protection specifications in writing, submit color samples and product approval numbers, and keep copies of every submission and response. If the HOA allows only tile, ask whether lightweight tile, metal that looks like tile, or a specific color is acceptable. If you think the HOA is not following the statute, consult a Florida attorney who handles community association law. More: HOA and condo roof responsibility.
Concrete vs clay tile and weight
JLC reports concrete tile costs about half as much as clay; clay keeps its color while concrete fades; clay can last centuries. Standard concrete tile weighs 9.5 to 12 pounds per square foot (lightweight versions 5.5 to 7) versus 2.5 to 4 for shingles; clay is about 8. If you are adding tile to a house not built for it, have an engineer check the structure. Switching from tile to a lighter roof removes weight but may change the look your HOA requires.
How to choose a provider
- Have the roof inspected for underlayment condition, broken tile and flashing before deciding between repair and re-roof.
- Ask whether existing tile can be reused and how breakage will be replaced and matched.
- Require the underlayment product name and Florida Product Approval or Miami-Dade NOA number in the contract.
- Confirm the tile attachment method and that foam installers are factory certified.
- In the HVHZ, confirm the TAS 106 uplift test is included and get the results.
- Confirm deck renailing, drip edge, hip and ridge nailers and corrosion-resistant fasteners are in scope.
- Ask your insurer in writing how a re-lay or re-roof will affect your roof age.
- Get HOA approval in writing, citing s. 720.3035(6) specifications if relevant.
- Keep spare tiles and all permit, inspection and product approval documents.
- Book a new wind mitigation inspection after final inspection.
Related roofing guides
- What Is the Best Roofing Material for Florida: Shingles, Tile or Metal?
- Florida Building Code for Roofs: HVHZ, Miami-Dade NOAs, and the 2026 9th Edition Changes
- Florida's 15-Year Roof Rule: Can Your Insurer Drop You for an Old Roof?
- Citizens Property Insurance and Your Roof: What Are the Eligibility, Inspection and Depopulation Rules?
- HOAs, Condos, and Roofs: Who Pays, Who Decides, and Florida's New Reserve Rules
- Florida's Matching Law: Will Insurance Replace the Whole Roof if Shingles Don't Match?
- What's Under Your Shingles: Decking, Underlayment, Secondary Water Barrier and Ventilation Explained
- My Safe Florida Home: Can a Grant Pay for Your New Roof?
Roofing by state and city
Questions people ask
How long does a tile roof last in Florida?
The tiles can last decades: published estimates run 30 to 50 years for concrete and longer for clay. The underlayment underneath usually wears out first, and its condition decides when the roof needs work. We found no independent published lifespan for Florida tile underlayment, so check the product's warranty and have the roof inspected as it ages.
Can you replace underlayment and reuse tiles?
Often. Florida's code lets existing tile be reinstalled on an existing tile roof if it is undamaged, and salvaged tile used for repair must match in material and profile. Broken tiles and rusted flashing must be replaced. The job is permitted as a roof replacement, so current underlayment, deck nailing and attachment rules apply. Ask your insurer how it will treat roof age.
What is foam-set vs mortar-set tile?
Mortar-set tile is bedded in cement mortar. Foam-set tile is held by pads of polyurethane adhesive. Post-hurricane surveys found mortar-set roofs lost much more tile, and FEMA recommended against mortar in high-wind areas. Foam works well when certified installers use the amount and placement in the product approval; failures were traced to too little foam.
Why won't my insurer cover my 20-year-old tile roof?
Florida's roof-age rule for private insurers starts at 15 years regardless of material. After that, the insurer can require an inspection showing at least 5 years of remaining life, and aging underlayment can prevent that. Citizens uses 50 years for tile. Get an inspection documenting remaining life, fix defects, and shop other carriers through an independent agent.
What is a tile uplift test?
In Miami-Dade and Broward (the HVHZ), adhesive-set and mortar-set tile roofs must pass a field static uplift test under TAS 106 after installation and before final inspection, to confirm the tiles are bonded. The building official may require it for mechanically fastened tile too. Ask whether the test is in your bid and keep the results.
Can I walk on a tile roof?
It is best not to. Tile can crack under foot, and cracks may not show until water gets in. Leave roof access to roofers experienced with tile, and inspect for broken pieces after any trade has been on the roof. Never walk on a wet tile roof, and use proper fall protection if access is unavoidable.
Where can I find matching tile for a repair?
Identify the maker and profile from the underside of a tile, then ask the maker or a distributor. Salvage yards and roofers often stock older profiles, and Florida's code allows like-kind salvaged tile for repairs. Keep spare tiles after any re-roof. For insurance claims, Florida's matching statute may require repairs to adjoining areas when no match exists.
Can I switch from tile to shingles or metal in my HOA?
Possibly. Florida law requires HOA boards to adopt hurricane protection specifications that include code-recognized roof systems meeting ASCE 7-22, and boards may not deny a conforming application, though they can require you to follow the community's existing look. Get the specifications in writing and submit product approvals and color samples.
Sources
- JLC: Roofing with concrete tile
- JLC: Tile roofs for hurricane zones
- JLC: Heavy roof loads from tile
- InterNACHI Standard Estimated Life Expectancy Chart
- Roof life expectancies attributed to NRCA (U.S. Forest Service)
- 2023 Florida Existing Building Code Chapter 7 (UpCodes)
- 2023 Florida Building Code, Building, Chapter 15 (UpCodes)
- FRSA: Tile changes in the 2026 9th Edition FBC
- FRSA: New 2023 FBC 8th Edition is now in effect
- FRSA: Additional 2026 FBC changes
- Miami-Dade: 9th Edition FBC roofing underlayment
- FRSA: Important new progress on Miami-Dade NOAs and tile adhesives
- FRSA: Providing homeowners peace of mind with adhered tile roofs (April 2022)
- Florida Building Commission 2026 FBC workplan
- City of Tampa 9th Edition announcement
- Greenberg Traurig: new FBC edition takes effect Dec. 31, 2026
- IBHS FORTIFIED re-roofing checklist
- Fla. Stat. s. 627.7011
- Fla. Stat. s. 626.9744 (matching)
- Fla. Stat. s. 720.3035
- Citizens roof requirements (Jan. 2023)
- Citizens roof rule changes (Mar. 2023)
- 2025 Cost vs. Value: Miami
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


