Local Guide · Residential solar installers
How Do I Choose a Solar Installer in Texas or Florida?
A step-by-step checklist for vetting solar installers: license lookups, Texas retailer registration, insurance, deposits, lien law and warranties, with the Texas and Florida laws that protect you.
Get at least three written, itemized quotes and compare them by cost per watt. Then verify the license yourself: a TDLR electrical contractor (plus, since September 1, 2026, a TDLR solar retailer registration for most sellers) in Texas, or a DBPR solar or electrical contractor in Florida. Ask for proof of liability and workers' compensation insurance, tie payments to milestones, get the workmanship warranty in writing, and confirm your cancellation deadline before signing.
Key facts
- Texas solar contracts that include installation must name a licensed electrical contractor and its license number, and commit to getting permits and interconnection approval (Occ. Code 1806.155).
- Since September 1, 2026, most Texas residential solar retailers and salespeople must be registered with TDLR; retailers must carry at least $1 million per occurrence and $2 million aggregate liability coverage.
- Florida licenses solar contractors as certified (statewide) or registered (local) through DBPR's Construction Industry Licensing Board (Fla. Stat. 489.105).
- A Florida contractor taking more than 10% up front must apply for permits within 30 days and start work within 90 days after permits issue (Fla. Stat. 489.126).
- Texas owners should reserve 10% of the contract price until 30 days after work is completed (Property Code 53.101).
- Texas homeowners have five business days to cancel a solar contract; Florida's home solicitation law gives three business days.
- DOE suggests favoring installers with at least three years of experience and comparing quotes by cost per watt.
- The Texas Attorney General received 2,448 solar-panel complaints from 2018 to mid-2024, per Texas Appleseed.
The short version: five checks that filter out most bad installers
Choosing a solar installer is less about finding a perfect company and more about removing the risky ones. In Texas and Florida, five checks do most of the work, and every one of them can be done from your kitchen table in under an hour.
- License. In Texas, the installation must be done by a TDLR-licensed electrical contractor. In Florida, the company must hold a state solar contractor license (or another Chapter 489 license that covers the work) from the Department of Business and Professional Regulation (DBPR). Look the license up yourself.
- Registration to sell (Texas). Since September 1, 2026, most companies and salespeople who sell or lease home solar in Texas must be registered with TDLR under the Residential Solar Retailer Regulatory Act (Occupations Code Chapter 1806).
- Insurance. Ask for a certificate of insurance (COI) showing general liability and workers' compensation coverage, sent directly from the insurance agent.
- Payments tied to progress. Never pay most of the price before equipment is on your roof. Florida law adds specific rules when a contractor takes more than 10% up front.
- Everything in writing. The contract should name the licensed contractor, list every piece of equipment, show the total price, give the production estimate and its assumptions, and spell out warranties and your cancellation rights.
The rest of this guide explains each check, the state laws behind them, what to ask in an interview, and what to do if the company you hire later disappears.
How many solar quotes should I get?
Get at least three written quotes. Orlando's city-owned utility, OUC, goes further and recommends at least four quotes on its current solar page (its 2025 printed guide said three). The U.S. Department of Energy also tells homeowners to get several quotes because prices for the same job differ, and to compare them by cost per watt.
Three quotes is the minimum because it shows you a range. With one quote you have no reference point. With two, you cannot tell which is the outlier. With three or four, a quote that is far above or below the others stands out, and you can ask why.
How to compare prices fairly
Divide the total price by the system size in watts. A 9 kW system (9,000 watts) quoted at $22,500 costs $2.50 per watt. For context, EnergySage marketplace data put the average installed price at $2.26 per watt in Texas and $2.12 per watt in Florida as of November 2026, before incentives, and the national median quote at $2.57 per watt in the first half of 2026. Berkeley Lab's Tracking the Sun study reports higher figures because it measures prices actually paid, including more add-ons, so treat any single benchmark as a rough guide, not a rule.
A very low price is not automatically a bargain. It can mean cheaper equipment, a smaller system than you need, missing permit fees, or a company cutting corners on labor. A very high price can include a battery, a main panel upgrade or roof work. Line the quotes up item by item before deciding. Our guide to reading a solar proposal walks through each line.
Where quotes come from
- Companies you contact yourself after checking their license.
- Referrals from neighbors who have had panels for at least a year (so they know how the system actually performs and how service calls go).
- Utility contractor lists. Some city-owned utilities keep lists of contractors who meet program rules. OUC says using one of its listed contractors is not required. Being on a list is not an endorsement of quality.
- Door-to-door or phone sellers. You can get a quote this way, but treat it as one of your three, not the only one. See our guide to door-to-door solar sales tactics.
How do I verify a solar installer's license in Texas?
Texas does not have a separate solar installer license. Solar wiring is electrical work, so it falls under the Texas Electrical Safety and Licensing Act (Occupations Code Chapter 1305), run by the Texas Department of Licensing and Regulation (TDLR). TDLR says anyone who performs or offers to perform non-exempt electrical work must be licensed and must do that work through a licensed electrical contractor.
The 2025 solar sales law makes this a contract requirement. Under Occupations Code 1806.155, a Texas solar contract that includes installation must say the work will be done by a licensed electrical contractor, must conspicuously show that contractor's name and license number, and must commit the retailer or contractor to get the permits and utility interconnection approval.
Three things to look up on the TDLR license search
- The electrical contractor license named in the contract. Confirm it is active and the business name matches.
- The master electrician tied to that contractor. A master electrician in Texas needs at least 12,000 hours of supervised on-the-job training, two years as a journeyman and a passing exam (Occ. Code 1305.153).
- Solar retailer and salesperson registration. Starting September 1, 2026, most companies and individuals who sell or lease residential solar must hold a TDLR registration. Retailers pay a $350 yearly fee and must carry general liability insurance of at least $1 million per occurrence and $2 million aggregate. Salespeople pay $56 a year, need no exam, but must pass a criminal background check and work for a registered retailer.
One exception matters: a licensed Texas electrical contractor and its own employees do not need the separate retailer or salesperson registration, but they still must follow the contract rules and the five-business-day cancellation right. A sales rep hired by an electrical contractor who is not its employee must register.
Use the TDLR license search at tdlr.texas.gov/LicenseSearch. More detail is in our Texas solar licensing guide.
How do I verify a solar installer's license in Florida?
Florida licenses solar contractors directly. Under Florida Statute 489.105(3)(o), a "solar contractor" is a contractor who installs, alters, repairs, maintains, relocates or replaces solar panels for water heating, pool heating and photovoltaic (PV) systems. DBPR's Construction Industry Licensing Board issues two kinds:
- Certified solar contractor (license prefix CV): can work anywhere in Florida.
- Registered solar contractor (prefix RV): limited to the local areas where the contractor holds a local competency card.
Other contractors can also do solar work if it falls within their own license. Section 489.105 says a contractor already certified or registered under Chapter 489 does not need to become a solar contractor to provide solar services within the scope of its own license. In practice you may see PV systems installed by a certified electrical contractor or a general contractor working with one.
A solar contractor does not have to subcontract "minor" electrical, roofing, plumbing or mechanical work if it is within the license scope and relates only to installing residential solar equipment (489.113(3)(f)). Ask who will do the roof penetrations and the electrical tie-in, and what license covers each.
Why the license check matters more in Florida
Unlicensed contracting is a first-degree misdemeanor in Florida, and a third-degree felony for a repeat offense or during a declared state of emergency (489.127). That emergency rule matters after hurricanes, when out-of-state crews arrive. A valid license also matters for your own protection: Florida's Homeowners' Construction Recovery Fund will not pay claims on a contract where the contractor lacked a valid, current license when the contract was signed (489.141).
Look up licenses through DBPR's Construction Industry Licensing Board pages at myfloridalicense.com. More detail is in our Florida solar contractor license guide.
What certifications matter (and which ones do not)?
A license is required by law. A certification is voluntary proof of training. Both are useful, but they are not the same thing, and a certification never replaces a license.
| Credential | What it is | How much weight to give it |
|---|---|---|
| State license (TDLR electrical contractor in Texas; DBPR solar or electrical contractor in Florida) | Legal permission to do the work | Required. No license, no deal. |
| TDLR solar retailer registration (Texas) | Legal permission to sell or lease home solar, required from September 1, 2026 | Required for most sellers who are not licensed electrical contractors. |
| NABCEP PV Installation Professional certification | Voluntary national certification from the North American Board of Certified Energy Practitioners, based on experience and a demanding exam | A strong sign of skill. DOE calls NABCEP the gold standard among installer certifications. |
| NABCEP PV Associate (entry-level exam) | A basic knowledge exam | Helpful, but not the same as a certified installer. San Antonio's CPS Energy rebate manual warned that passing the entry-level exam "should not be confused" with being a NABCEP Certified PV Installer. |
| Manufacturer "certified installer" programs | Status granted by panel, inverter or battery makers, often after training | Can unlock longer manufacturer warranties. Ask what the status means in writing and whether the extended warranty is registered in your name. |
| Utility contractor lists | A utility's list of contractors meeting its program rules | Shows the contractor met paperwork rules. CPS Energy's manual barred listed contractors from calling themselves "approved," "certified" or "recommended" by the utility. |
Ask whether the NABCEP-certified person actually works for the company and reviews your design, or is just a name on a website. When CPS Energy ran its rebate program, it required listed contractors to employ a NABCEP-certified installer full time and to have that person review and sign system designs. That is a good standard to ask about even where no rule requires it. You can check certification status on nabcep.org.
Insurance: what to ask for and how to read a certificate
If a worker falls off your roof or a crew damages your home, you want the contractor's insurance to pay, not yours. Ask every finalist for a certificate of insurance (COI). Ask the insurance agent to email it directly to you, so you know it is current and real.
What the certificate should show
- Commercial general liability. Covers damage to your property and injuries to others. In Texas, registered solar retailers must carry at least $1 million per occurrence and $2 million aggregate under TDLR rules. That is a useful benchmark for any installer.
- Workers' compensation. Covers crew injuries. Ask how subcontractor crews are covered too.
- Dates. The policy period should cover your install dates.
- Named insured. The business name should match the license and the contract.
Your own homeowners policy matters too. Call your insurer before you sign to ask how panels will be covered and whether your premium changes. Our solar and homeowners insurance guide covers this. Texas law says a utility or retail electric provider may not require you to buy extra liability insurance for a compliant home system (Utilities Code 39.916(e)), and Florida's net metering rule bars investor-owned utilities from requiring insurance for small Tier 1 systems (10 kW or less).
Local installer or national company?
Neither is automatically better. What matters is who will answer the phone in year eight when an inverter fails or a roof leak shows up near a mount.
| Question | Why it matters |
|---|---|
| Who does the actual installation: your employees or subcontractors? | Many sales-focused companies hand the install to a local subcontractor. That can be fine, but you need to know who is on your roof and who is responsible. |
| Where is your nearest service office, and how fast do you respond to warranty calls? | A service promise is only as good as the people who can reach your home. CPS Energy's program once required local contractors to show proof of responding to warranty claims within 48 hours. Ask for a written response time. |
| How many systems have you installed in my city or utility area? | Local experience means knowing your permit office, your utility's interconnection process and, in Florida, the wind-load rules that apply to your county. |
| How long have you been installing solar under this name and license? | DOE suggests favoring installers with at least three years of experience. Check the license issue date, not just the website's claims. |
Experience in your market is especially important in Miami-Dade and Broward, which sit in Florida's High Velocity Hurricane Zone with stricter engineering review, and in Houston, where the city requires a Texas professional engineer's sealed structural letter. See our permit guides for Texas and Florida.
Does the installer use subcontractors?
Ask directly, and ask for the answer in writing. DOE tells homeowners to ask whether subcontractors will be used, which parts of the job they will do, how the installer oversees them, and to check the subcontractors' credentials too.
Texas: you have a legal right to a list
For residential construction contracts, Texas Property Code 53.256 requires the original contractor to give the owner, before construction starts, a written list of each subcontractor and supplier it plans to use, with names, addresses and phone numbers, and to update the list within 15 days when someone is added or removed. You can waive this right only in writing, in bold type. Do not sign a waiver unless you understand what you are giving up.
Florida: watch for Notices to Owner
In Florida, subcontractors and suppliers who are not paid can file a lien on your property. Many send a "Notice to Owner" early in the job to protect that right. If you receive one, keep it. Before each payment, ask for a written release of lien from anyone who sent you a notice. Florida Statute 713.015 requires that residential contracts over $2,500 include a bold, capitalized warning explaining this risk and the release-of-lien protection.
If a subcontractor will do the roof work, ask whether the roofing warranty comes from the installer, the subcontractor or the roofing manufacturer, and who you call if a leak appears.
Deposits and payment schedules: what Texas and Florida law says
The safest payment schedule for a contractor matches money to visible progress. A reasonable pattern is a small deposit at signing, a larger payment when equipment is delivered or installed, and the final payment only after the city inspection passes and the utility grants permission to operate. The Texas Department of Insurance gives the same basic advice for any home repair: do not pay in full up front, and do not make the final payment until the work is done.
Florida's 10% deposit rule (Statute 489.126)
If a Florida contractor takes more than 10% of the contract price as an initial payment for work on a home, the contractor must:
- apply for the permits within 30 days after the payment (unless no permit is needed), and
- start the work within 90 days after all needed permits are issued,
unless there is just cause or you agreed in writing to a longer period. If the deadlines pass, send a written demand by certified mail, return receipt requested. If the contractor does not act within 30 days of receiving it, the law allows an inference that there was no just cause. A contractor who holds more money than the value of the work done and stops work for 90 days, or fails to refund money owed within 30 days of a written demand, can face criminal penalties that scale with the amount, from a first-degree misdemeanor under $1,000 up to a first-degree felony at $200,000 or more.
Texas retainage: the 10% you hold back
Texas Property Code 53.101 tells owners to reserve 10% of the contract price (or of the value of work done) during the work and for 30 days after the work is completed. This retained money protects you if a subcontractor or supplier files a lien claim. If you pay everything at once and a supplier goes unpaid, you could end up paying twice. Ask your installer how its payment schedule accounts for this rule, and talk to a Texas real estate attorney if a large job is involved.
Texas also requires the contractor, at final payment on a residential job, to give you a signed "bills-paid" affidavit stating that everyone who supplied labor or materials has been paid, or listing who is still owed (Property Code 53.259). Do not hand over the last check without it.
Payment red flags
- A demand for most of the price at signing.
- Pressure to pay a salesperson personally, in cash, or by wire.
- Final payment due "at install" before the inspection or permission to operate.
- A contract that lets the company keep your deposit if you cancel during the legal cancellation window. In both states, the law protects your right to cancel; see below.
Lien law basics every solar buyer should know
A construction lien (called a mechanic's lien in Texas) is a legal claim against your property by someone who worked on it or supplied materials and was not paid. It can hold up a home sale until it is cleared. Solar jobs involve suppliers and often subcontractors, so the risk is real even with an honest installer if that installer runs into money trouble.
| Texas (Property Code ch. 53) | Florida (Statutes ch. 713) | |
|---|---|---|
| Required disclosure before signing | Contractor must give a "Know Your Rights and Responsibilities" disclosure statement before a residential construction contract is signed (53.255) | Contracts over $2,500 on homes of up to four units must include a bold lien warning that you sign and date (713.015) |
| Your main protection | Hold back 10% for 30 days after completion (53.101); get the bills-paid affidavit at final payment (53.259) | Get written releases of lien from anyone who sent a Notice to Owner before paying |
| Subcontractor information | Right to a written list of subcontractors and suppliers (53.256) | Notices to Owner tell you who is working on the job |
| Homesteads | A lien on a homestead requires a written contract signed before work starts, signed by both spouses if married, and filed with the county clerk (53.254) | A Notice of Commencement may need to be recorded before the first inspection on larger jobs (713.13); see our Florida permit guide |
The Texas disclosure statement itself tells owners to investigate the contractor, get references, and get a written agreement that describes the work, the time for completion, the cost and the payment method, including the statutory reservation of funds. That is a good checklist for any solar contract.
This is general information, not legal advice. For a lien filed against your home, talk to a real estate attorney in your state.
Workmanship warranties: length, coverage and who backs them
A solar system usually comes with three separate warranties, and the installer controls only one of them.
- Panel warranties (product and power output) come from the panel maker.
- Inverter and battery warranties come from those manufacturers.
- The workmanship warranty comes from the installer. It covers the quality of the installation: wiring errors, loose connections, and often roof penetrations.
Texas law sets a floor for the equipment: a utility must allow interconnection of distributed renewable generation that has a five-year warranty against breakdown or undue degradation (Utilities Code 39.916). Good installers offer workmanship coverage well beyond that. Ask for the length in writing and read what it covers.
Questions to ask about the workmanship warranty
- How many years does it last, and does it include roof leaks at the mounting points?
- Does it cover labor to remove and reinstall panels if an equipment part fails under the manufacturer's warranty? Manufacturer warranties often cover the part but not the labor.
- Is the warranty backed by a third-party insurance policy or a manufacturer program, or only by the installer?
- Does it transfer to a buyer if I sell the house? (Texas Business and Commerce Code 115.004-115.005 already requires lease and PPA documents to say whether agreements and warranties transfer.)
- Who handles warranty claims, and what is the response time?
Our solar warranty guide explains each warranty type in depth.
What happens if the installer goes out of business?
Solar companies do close, and when they do, customers are left with a workmanship warranty no one will honor and sometimes a half-finished job. Plan for this before you sign.
How the warranties behave
- The installer's workmanship warranty usually ends with the company, unless it is backed by insurance or a manufacturer program that survives the company.
- Manufacturer warranties usually survive, because they come from the panel, inverter or battery maker. Make sure they are registered in your name, keep the serial numbers, and save the model spec sheets.
- Leases and PPAs are often sold to another company that takes over service. Read who is obligated to maintain the system.
Steps to protect yourself
- Keep a project folder: contract, permit numbers, final inspection, interconnection agreement, permission-to-operate letter, equipment list with serial numbers, warranty registrations and the as-built plans.
- Ask for monitoring access in your own name, so you are not locked out if the company's account disappears.
- Pay on milestones, so you never have more money in the job than work completed.
- In Florida, if a licensed contractor's violation cost you money and you cannot collect, the Homeowners' Construction Recovery Fund may pay part of your loss. Contracts over $2,500 must include a notice about this fund (489.1425). To claim, you generally need a court judgment, arbitration award or licensing board restitution order, must try to collect first, and must file within one year after that action ends (489.141). Solar contracts entered on or after July 1, 2016 can qualify.
- In Texas, TDLR can take complaints against electrical contractors for solar work at any time, and for retailer contracts signed on or after September 1, 2025. After notice and a hearing, TDLR can order cancellation of a solar sale or lease and a refund of amounts paid (Occ. Code 1806.207).
If a company vanishes mid-project, check your permit status with the city, and ask a licensed electrical contractor to inspect the work before anyone energizes it. Our complaints guide lists where to file.
Who handles permits, HOA approval and utility paperwork?
In most solar contracts, the installer handles all three, but you should confirm it in writing and know what you must sign.
| Task | Who usually does it | What you do |
|---|---|---|
| Building and electrical permits | Installer (in Texas, ch. 1806 contracts must commit the retailer or contractor to obtain them) | Sign owner forms. In Houston, a signed declaration is checked against appraisal district ownership records. |
| HOA approval | Installer prepares drawings; homeowner usually submits | Submit before install. Texas Property Code 202.010 and Florida Statute 163.04 limit what HOAs can ban. See our HOA solar rights guide. |
| Utility interconnection application | Installer, with your authorization | Sign the application. In Texas, pick a retail electric provider buyback plan if you are in a competitive area. |
| Permission to operate (PTO) | Utility issues it | Do not turn the system on until you receive it. See our PTO guide. |
| Property tax exemption | Often the homeowner | In Texas, file Form 50-123 with your appraisal district. See our property tax guide. |
Questions to ask every solar installer
Use the same list with every company so you can compare answers side by side.
About the company
- What is your license number, and who is the license holder? (Texas: electrical contractor and master electrician; Florida: solar or electrical contractor.)
- In Texas, are you registered with TDLR as a solar retailer, and is the salesperson registered?
- How long have you installed solar under this license, and how many systems in my area?
- Can you give me three references from customers whose systems have run for at least a year?
- Will your employees or subcontractors do the work? Who will be the on-site lead?
About the system
- What exact panel, inverter, racking and (if any) battery models are you proposing? Please send the spec sheets.
- How did you estimate production? What tilt, direction, shade and loss assumptions did you use?
- Does my roof need repair or replacement first? Who pays if the roof is damaged or leaks?
- Can vent pipes in the array area be moved or replaced with low-profile vents? (DOE suggests asking.)
- Will I need a main electrical panel upgrade? Is it in the price?
About the paperwork
- What is the payment schedule, and what triggers each payment?
- What is the timeline from signing to permission to operate, and what happens if you miss it?
- What warranties do you provide, how long are they, and who backs them?
- Who submits the permit, HOA and utility applications?
- How do I cancel, and by what date?
How do I check reviews without being fooled?
Online star ratings are easy to game and often reflect the sales visit, not the system's performance years later. Build a fuller picture from several sources.
- Read the one- and two-star reviews. Look for patterns: missed timelines, permits never pulled, systems never turned on, warranty calls ignored. One angry review means little. Twenty with the same story means a lot.
- Check dates. A burst of five-star reviews in one month can signal a review campaign.
- Look up official complaint records. TDLR, the Texas Attorney General's Consumer Protection Division, and Florida's Department of Agriculture and Consumer Services (FDACS) take consumer complaints. TDI suggests checking references and Better Business Bureau complaints before hiring for home repairs.
- Search court records. Your county clerk's site may show lawsuits and liens filed against the company.
- Call references. Ask whether the system produces what was promised, whether the roof has leaked and how the company handled problems.
Complaint volume is high in this industry. Texas Appleseed found the Texas Attorney General received 2,448 solar-panel complaints from January 2018 through June 2024, with Harris, Tarrant, Dallas, Bexar and El Paso counties filing the most. The top issues were false or misleading statements (45%) and unsatisfactory service (37%).
Red flags in a solar company
Federal regulators (the Treasury Department with the CFPB and FTC) issued a consumer advisory after a rise in complaints about solar sellers misleading customers about costs, savings and tax credits. Its red flags line up with what Texas and Florida regulators report.
- "Government program" or "free panels" pitches. The State of Texas does not offer grants or rebates for home solar, according to the PUC's consumer guide. Texas law now bars falsely implying a connection to a utility or government agency (Occ. Code 1806.201).
- Old tax credit claims. The federal 30% residential credit (Section 25D) does not apply to systems installed in 2026. A seller still promising it for a purchased system is wrong. See our 25D status guide.
- "Your bill will be zero." The PUC guide says solar does not eliminate your bill; you still use grid power at night and may owe monthly charges.
- Pressure to sign today. Limited-time offers are a named red flag in the federal advisory.
- No license number in the contract, or a license under a different business name.
- Ignoring your "No Soliciting" sign. In Texas, this is a prohibited act under 1806.201.
- Roof-claim pitches in Florida. Statute 489.147 bars contractor ads that push homeowners to file roof insurance claims without required warnings that you pay the deductible and that waiving deductibles or filing false claims is a felony.
- Refusal to give a written, itemized proposal or a copy of what you signed.
Your right to cancel in Texas and Florida
Both states give you a short window to change your mind, but the rules differ.
| Texas | Florida | |
|---|---|---|
| Law | Occupations Code 1806.155-1806.156 (solar contracts since September 1, 2025) | Statutes 501.021-501.031 (home solicitation sales over $25) |
| Window | Five business days, without penalty | Until midnight of the third business day after signing |
| Applies to | Residential solar sale and lease contracts | Sales made away from the seller's place of business, such as at your door or kitchen table |
| What the contract must show | The last calendar date to cancel and a mailing or email address for notice | A conspicuous "BUYER'S RIGHT TO CANCEL" statement |
| Linked contracts | Any linked contract arranged or referred by the seller must also be cancelled | The seller may not keep any cash down payment when you cancel |
Send your cancellation in writing, keep proof of the date sent, and keep a copy. Our cancellation rights guide has the details and sample wording.
How to choose a provider
- Collect at least three written, itemized quotes and compare them by cost per watt.
- Look up the Texas electrical contractor license (TDLR) or Florida solar or electrical contractor license (DBPR) yourself.
- In Texas, confirm the retailer and salesperson hold TDLR solar registrations (required since September 1, 2026) unless the seller is a licensed electrical contractor's own employee.
- Ask for a certificate of insurance sent straight from the agent, showing general liability and workers' compensation.
- Ask whether subcontractors will be used; in Texas, request the subcontractor and supplier list under Property Code 53.256.
- Check NABCEP certification and whether that person works for the company and reviews your design.
- Get spec sheets for every panel, inverter, racking system and battery in the quote.
- Tie payments to milestones; in Florida, know the 10% deposit rule in Statute 489.126; in Texas, plan for 10% retainage for 30 days after completion.
- Get the workmanship warranty length, coverage and backing in writing.
- Confirm who handles permits, HOA approval and the utility interconnection application.
- Read the cancellation section and write down the last date to cancel.
- Search TDLR, Attorney General, FDACS and county court records for complaints and liens.
- Keep a project folder with every document and serial number.
- In Texas, collect the bills-paid affidavit before final payment; in Florida, collect lien releases from anyone who sent a Notice to Owner.
Related residential solar installers guides
- How Do I Read and Compare a Solar Proposal?
- Door-to-Door Solar Sales: Common Scams, Pressure Tactics and How to Protect Yourself
- How to Cancel a Solar Contract in Texas or Florida: Cooling-Off Periods and Next Steps
- Does Texas Require a Solar License? TDLR Electrician Rules and Who Can Install
- Florida Solar Contractor Licenses: Who Can Legally Install Solar in Florida
- What Do Solar Warranties Actually Cover? Panels, Inverters, Batteries, Workmanship and Roof Leaks
- How to File a Solar Complaint in Texas or Florida: Who Handles What
- Solar Lease vs PPA vs Owning Your System: Contract Types and Consumer Risks
Residential solar installers by state and city
Questions people ask
Is a solar license required in Texas?
Texas has no separate solar installer license, but solar wiring is electrical work, so it must be done through a TDLR-licensed electrical contractor under Occupations Code Chapter 1305. Since September 1, 2026, most companies and salespeople that sell or lease home solar also need a TDLR solar retailer or salesperson registration under Chapter 1806. Licensed electrical contractors and their own employees are exempt from that registration but still must follow the contract and cancellation rules. Check any license on the TDLR license search before you sign.
What license does a Florida solar installer need?
Florida issues solar contractor licenses through DBPR's Construction Industry Licensing Board, either certified (statewide, CV prefix) or registered (local, RV prefix). Electrical or other Chapter 489 contractors may also do solar work within their own license scope. Unlicensed contracting is a crime in Florida, and penalties rise during a declared state of emergency. Look up the license number on the DBPR site and make sure the business name matches the contract.
How much deposit is normal for solar?
There is no single legal cap, but smaller is safer. In Florida, if a contractor takes more than 10% of the price as an initial payment, it must apply for permits within 30 days and start within 90 days after permits issue, unless there is just cause or you agree otherwise in writing (Statute 489.126). In Texas, owners are told to hold back 10% of the price until 30 days after completion (Property Code 53.101). Tie later payments to delivery, installation, inspection and permission to operate.
Is NABCEP certification required?
No state law in Texas or Florida requires it for homeowners' installers. It is a voluntary national certification that shows a person passed a demanding exam and has field experience. Some utility programs have required it; San Antonio's CPS Energy once required rebate contractors to employ a NABCEP-certified installer full time. Treat it as a strong plus on top of the required state license, not a substitute for one. You can verify certification on nabcep.org.
How long should a solar company have been in business?
The Department of Energy suggests favoring installers with at least three years of experience. Look past the website: check when the license was issued, how long the company has operated under its current name, and how many systems it has installed in your city. A long track record matters because your workmanship warranty is only useful if the company is still around to honor it years from now.
What if my installer goes bankrupt?
Manufacturer warranties on panels, inverters and batteries usually survive because they come from the equipment makers, so register them in your name and keep serial numbers. The installer's workmanship warranty often ends unless a third party backs it. In Florida, the Homeowners' Construction Recovery Fund may cover part of losses caused by a licensed contractor's violations if you obtain a judgment or restitution order and cannot collect. In Texas, file with TDLR. A real estate attorney can help with liens.
Should the installer or I apply for HOA approval?
Either can, but the installer usually prepares the drawings and equipment details, and many HOAs want the homeowner to sign the application. Submit it before work begins. Texas Property Code 202.010 and Florida Statute 163.04 limit what HOAs can prohibit, but both allow some rules about placement. Ask the installer to design a layout that meets your HOA's rules and the state law from the start.
What is a bills-paid affidavit?
It is a sworn statement required in Texas at final payment on a residential construction contract (Property Code 53.259). The contractor states that everyone who supplied labor or materials has been paid in full, or lists who is still owed and how much. Making a false statement in it is a misdemeanor. Ask for it before you make the final payment on a solar job, along with copies of the final inspection and permission to operate.
Can I hire an electrician instead of a solar company?
Yes, if the electrician's business holds the right license. In Texas, a licensed electrical contractor can install solar and is exempt from the separate retailer registration. In Florida, an electrical contractor can install PV within its license scope under Statute 489.105. Make sure the company has real solar experience, handles roof attachments correctly or works with a licensed roofer, and offers clear workmanship coverage.
Sources
- TDLR: Electricians program
- TDLR: Residential solar retail sales now regulated by TDLR (Sept. 10, 2025)
- TDLR: Residential Solar Retailers, what is in effect
- TDLR: Apply for a solar retailer registration
- TDLR: Apply for a solar salesperson registration
- TDLR: Residential Solar Retailers knowledge base
- TDLR license search
- Texas Occupations Code Chapter 1806
- Texas Occupations Code Chapter 1305
- Texas Property Code Chapter 53 (mechanic's liens)
- Texas Utilities Code Chapter 39 (Sec. 39.916)
- Texas Business and Commerce Code Chapter 115
- Florida Statute 489.105 (definitions)
- Florida Statute 489.113
- Florida Statute 489.126 (moneys received by contractors)
- Florida Statute 489.127 (unlicensed contracting)
- Florida Statute 489.141 (recovery fund eligibility)
- Florida Statute 489.1425 (recovery fund notice)
- Florida Statute 489.147
- Florida Statute 713.015 (mandatory lien disclosure)
- Florida Statute 501.025 (home solicitation cancellation)
- Florida DBPR Construction Industry Licensing Board
- Florida PSC Rule 25-6.065 text
- U.S. DOE: Decisions, decisions: choosing a solar installer
- CPS Energy Solar Rebate Program Manual (rev. 2019)
- OUC: How to apply for solar at your home
- U.S. Treasury, CFPB, FTC consumer advisory on solar
- PUC Texas Solar Guide for Consumers (March 2026, city-hosted copy)
- Texas Department of Insurance: after hail or windstorms
- Texas Appleseed: solar panel complaints report (Oct. 2024)
- EnergySage: Texas solar cost data (Nov. 2026)
- EnergySage: Florida solar cost data (Nov. 2026)
- EnergySage: H1 2026 marketplace highlights
- NABCEP
- Houston Permitting Center: Solar PV permit and inspection guide (CE-1198)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


