Local Guide · Residential solar installers
Solar Permits in Florida: Miami-Dade, Tampa, Orlando, Jacksonville and Statewide Rules
Every grid-tied solar system in Florida needs a local building permit. Here is who can pull one, the statewide deadlines and private provider option, HVHZ wind engineering, the Notice of Commencement, and how Miami-Dade, Tampa, Orlando and Jacksonville handle it.
Yes, Florida requires a building permit for grid-tied solar. Your city or county building department reviews structural, roofing and electrical plans under the Florida Building Code, and a licensed solar or electrical contractor usually applies. State law sets review deadlines (Statute 553.792), lets you use a private provider for faster single-trade review (553.791), and requires a Notice of Commencement copy before the first inspection on contracts over $5,000. Miami-Dade and Broward add hurricane-zone engineering.
Key facts
- Florida Statute 553.791(1)(r) defines single-trade inspections and plan reviews to include 'solar energy and energy storage installations or alterations.'
- Under 553.791(8)(b), for a single-trade review on a one- or two-family home, the building official must flag incomplete forms within 5 business days or the permit is deemed approved.
- Florida Statute 553.792: a completeness notice is due within 5 business days; fees drop 10% per business day for missed deadlines.
- Miami-Dade and Broward make up the High Velocity Hurricane Zone; Miami-Dade requires signed and sealed PV plans addressing HVHZ wind pressures.
- Palm Beach County's expedited solar checklist uses a 170 mph design wind speed, 50-pound maximum point loads and 3-foot edge setbacks.
- Palm Beach County's July 19, 2023 advisory: only rafter or truss attachments with lag screws had been validated for county wind loads; UL 2703 excludes roof attachments.
- Florida Statute 713.135(1)(e): a copy of the recorded Notice of Commencement must be filed before the first inspection if the direct contract exceeds $5,000.
- Florida Statute 377.705: solar systems sold in Florida must meet FSEC standards unless certified by a Florida-licensed engineer under the Florida Building Code.
- Florida Statute 489.103(7)(a)3 limits owner-builder solar installs to areas in a DOE SunShot Rooftop Solar Challenge grant, with a licensed electrician doing the wiring.
Do you need a permit for solar in Florida?
Yes, for a rooftop or ground-mounted system that connects to your home's wiring. Florida's building code is a single statewide code, the Florida Building Code (FBC), but your city or county building department (the "local enforcement agency") issues the permit, reviews the plans and does the inspections. In unincorporated areas that is the county. Inside a city such as Tampa, Orlando or Jacksonville, it is the city's building department.
A solar permit is usually two reviews in one application: a structural and roofing review (will the racking stay on the roof in a hurricane, and will the roof stay watertight?) and an electrical review (is the system wired safely to code?). Utilities add a third step after the permit, interconnection, which is covered in our interconnection and permission to operate guide.
Two state laws limit what local governments can do. Florida Statute 163.04(1) bars ordinances that prohibit or have the effect of prohibiting solar collectors. Chapter 553 sets permit review timelines and lets owners use private providers for plan review and inspections. Neither law removes the need for a permit.
This guide is general information. Your installer normally pulls the permit, and your building department has the final word on what it needs.
Who is allowed to pull a solar permit in Florida
| License or status | What Florida law allows |
|---|---|
| Certified or registered solar contractor | Statute 489.105(3)(o): installs, alters, repairs, maintains, relocates or replaces solar panels for potable water heating, pool heating and photovoltaic systems and related equipment. Statute 489.113(3)(f): need not subcontract minor electrical, mechanical, plumbing or roofing work (as defined by board rule) within its license scope that pertains only to residential solar equipment. |
| Electrical contractor | Can permit the electrical work. Under 489.105, a contractor already licensed under chapter 489 need not become a solar contractor for solar work within its existing license scope. |
| Roofing work by a solar contractor | Miami-Dade's PV permitting workshop cites Florida Administrative Code Rule 61G4-15.021: solar contractors may do roofing work directly related to the solar install, limited to an area within 18 inches of each roof penetration or attachment, done to National Roofing Contractors Association practices. The workshop notes state-licensed electrical contractors do not have this authorization. |
| Homeowner as owner-builder | Statute 489.103(7)(a)3 allows owners of one- to three-family homes to install, uninstall or replace solar panels only where the local government participates in a U.S. Department of Energy SunShot Rooftop Solar Challenge grant, and the owner must still use a licensed electrical contractor for wiring and interconnection. Ask your building department whether that applies. |
Look up any Florida contractor's license on the DBPR site. Unlicensed contracting is a first-degree misdemeanor under Statute 489.127, and a third-degree felony for a repeat offense or during a Governor-declared state of emergency. Local code boards may impose civil penalties up to $2,500 per day. See our Florida solar contractor license guide.
Florida's statewide permit timelines (Statute 553.792)
Florida has no solar-only permit statute that we could find in Chapter 553. Solar is covered by the general building permit timeline law, Section 553.792. Its key rules, as currently written:
- Completeness notice in 5 business days. After you submit, the local government must tell the applicant in writing within 5 business days what, if anything, is missing. If it does not, the application is automatically deemed complete and accepted.
- Decision deadlines. For an applicant using the local government's own plans reviewer, the law sets deadlines after a complete application. Residential units and electrical permits for structures under 7,500 square feet get 30 business days. Structures of 7,500 square feet or more get 60 business days. A shorter 5-business-day deadline applies to listed permit types (including electrical and roofing) for an existing single-family home when the work is valued under $15,000. Solar is not named separately, and most home solar jobs are valued above $15,000, so expect your building department to use the 30-business-day track or its own faster local rule.
- Fee reductions for missed deadlines. If the local government misses a deadline, it must reduce the permit fee by 10% for each business day late, unless the parties agreed in writing to an extension, the applicant caused the delay, or force majeure applies. It does not have to reduce the fee if it sent written notice of the specific code problems within the deadline.
- Corrections. After a written notice of code problems, the applicant has 10 business days to submit revisions. The agency then has 10 business days to approve or deny, or the fee is reduced 20% per business day late.
- Expedited policies. Each local government must post on its website its procedures for permits that law requires to be expedited.
Section 553.792(1)(b) lets local ordinances set stricter (faster) timelines, so ask your building department whether it has a quicker local track for residential solar.
The private provider option (Statute 553.791)
Florida lets a property owner, or the owner's contractor with written authorization, hire a private provider to do plan review, inspections, or both, instead of the building department. A private provider is a licensed building code administrator, a Florida professional engineer, or a Florida architect. The building department still issues the permit and audits the work, but it cannot repeat the plan review or inspections the provider performed, except for things like local ordinances, floodplain rules and site review.
Why it matters for solar
The statute's definition of "single-trade inspection" and "single-trade plans review" expressly includes "solar energy and energy storage installations or alterations." That brings home solar and batteries into the faster single-trade rules:
- For a single-trade plans review on a single-family or two-family dwelling, the building official must give written notice of any incomplete forms within 5 business days of receiving the permit application. If it does not, the permit is deemed approved as a matter of law and must be issued the next business day. For other jobs the window is 10 business days.
- If the provider is a Florida engineer or architect who seals the compliance affidavit, the official must issue the permit or send specific written code deficiencies within 10 business days, or the permit is deemed approved.
- For single-trade plan reviews, the private provider may use an automated or software-based plans review system that checks compliance with codes such as the National Electrical Code and the FBC.
- Inspections may be done in person or virtually, and the building official may not bar the provider from inspecting after hours, on weekends or on holidays.
- The provider must post each inspection record and give it to the building official within 4 business days.
Notice requirement
The owner or contractor must notify the building official in writing, on the Florida Building Commission's form, either at permit application or by 2 p.m. local time two business days before the first scheduled inspection. Jacksonville's Building Inspection Division, for example, has a private provider section and reporting process on its website.
Ask your installer whether it uses a private provider and who pays for it. It can speed up a permit, but it adds a fee and you still need utility approval after.
Is SolarAPP+ used in Florida?
SolarAPP+ is an automated online permit review platform for standard home solar systems. We could not confirm from an official Florida city or county source that any Florida jurisdiction uses it, and the platform's own site blocked our request. Treat any claim that "your city uses SolarAPP+" as something to verify directly with the building department.
Florida's private provider statute reaches a similar result by another route: since solar and energy storage count as single-trade reviews, a private provider may use automated software review and the building department must act on completeness within 5 business days for one- and two-family homes.
City and county guide: Miami-Dade, Tampa, Orlando, Jacksonville
Check which agency covers your address first. A home inside a city's limits uses the city's building department. A home in unincorporated territory uses the county's. Your property tax bill or the county property appraiser's site shows whether you are in a city.
| Area | Who issues permits | How you apply | Solar-specific notes we verified |
|---|---|---|---|
| Unincorporated Miami-Dade County | Miami-Dade Department of Regulatory and Economic Resources (RER), Construction, Permitting and Building Code Division | County permit portal and e-permitting system | Building permit application signed and notarized by owner and contractor; electrical fee sheet with Electrical Category 34, Solar Photovoltaic; select "Roof Mounted" so the rooftop in-progress inspection is generated; one set of signed and sealed plans by a design professional (or electronic PDFs); Category 34 permits routed through Concurrent Plans Processing for simultaneous structural, roofing and electrical review; signed Owner Solar System Disclosure Form; HVHZ wind design |
| Cities in Miami-Dade | Ask the city; incorporated cities generally issue their own building permits | City portal | Still in the High Velocity Hurricane Zone, so HVHZ structural rules apply |
| Broward County and its cities | County or city building department | Local portal | Broward is part of the HVHZ with Miami-Dade |
| City of Tampa | City of Tampa Construction Services | Accela Citizen Access online permitting | Ask Construction Services for current solar submittal requirements; unincorporated Hillsborough County is a separate department |
| City of Orlando | City of Orlando Permitting Services | Online plan submission after the permit application is processed; plans reviewed digitally; online permit status and inspection scheduling | Unincorporated Orange County has its own permitting office |
| City of Jacksonville (consolidated with Duval County) | Building Inspection Division, Planning and Development Department | JaxEPICS; online electronic submission is required for all permit types | Has a private provider section; its site says permits submitted on or after January 1, 2024 must comply with the FBC 8th Edition (2023). Confirm the edition in effect on your application date, since the 9th Edition (2026) takes effect for applications submitted on or after December 31, 2026 |
| Unincorporated Palm Beach County (for comparison) | Palm Beach County Building Division | County portal | Publishes an Expedited Solar PV Permit checklist for licensed CVC (solar) and EC (electrical) contractors; details below |
See our city guides: Miami, Tampa, Orlando and Jacksonville.
Miami-Dade and Broward: High Velocity Hurricane Zone engineering
The FBC's High Velocity Hurricane Zone (HVHZ) is Miami-Dade and Broward counties. Rooftop solar there is held to the HVHZ structural chapter (Chapter 16) and HVHZ roofing chapter (Chapter 15, Sections 1512 through 1525). Miami-Dade's PV permitting workshop, presented by RER with the Florida Solar Energy Center, lists the most common reasons solar plans get rejected:
- Plans that do not address HVHZ wind pressures, or have incomplete or wrong wind pressure calculations
- Roof plans that do not match the roof's actual shape (hip versus gable versus flat)
- Roof pressure zones not calculated or shown correctly
- Modules, racking and stand-offs not rated for the pressure zones where they are installed
- Connections that do not meet the HVHZ Chapter 16 wind load requirements
- Plans not properly signed and sealed, or illegible scans and data sheets
- Roof penetration and flashing details that do not meet HVHZ Chapter 15 or NRCA practices, or that are not compatible with the roof type
Practical points from the county's guidance
- Corners. The workshop says do not install PV modules in the P3 corner zones, and that installing arrays in Zone 1 helps minimize disapprovals.
- Tile roofs. A fastener through a tile roof sealed only with mastic or sealant is not an approvable PV flashing detail. Penetrations should not be in valleys, and the workshop notes NRCA recommends keeping penetrations at least 18 inches from a valley.
- Low-slope roofs. Pitch pans filled with roof cement are called a poor long-term choice because the cement shrinks.
- Racking type. Roofs with a pitch of 2:12 or greater need a steep-slope racking system; lower pitches need a low-slope system.
- Fire rating. Rooftop PV must have the same fire classification as the roof assembly, and modules and racking are evaluated together under UL 1703 and UL 2703.
- Old roofs. The county strongly recommends replacing the existing roof first if the PV system is expected to outlast it, since PV systems typically last 20-plus years. See our roof condition and reroofing guide.
- Owner disclosure. The owner must sign Miami-Dade's Owner Solar System Disclosure Form, which the county describes as "informed consent" before installing PV on an existing roof. Power of attorney signatures are not allowed on it.
The workshop is an older county presentation that references the 2014 NEC and FBC editions that have since been replaced. Its structural and roofing rejection list remains useful, but confirm current code editions with RER.
Wind load engineering outside the HVHZ
Every Florida rooftop array has to be designed for wind, not just those in Miami-Dade and Broward. The Florida Building Commission's fact sheet on ASCE 7-16, the wind standard used in the FBC 7th Edition (2020), says ASCE 7-16 added new wind load criteria specifically for rooftop solar panels. The method depends on panel length, tilt, height above the roof, parapets and pressure equalization, and the standard revised roof pressure zones. The FBC 9th Edition (2026) Residential code adds more PV rules, including requirements for elevated PV support structures used as accessory structures, flashing rules for PV panels, and a requirement that building-integrated PV (BIPV) roof coverings be listed and labeled to UL 7103.
Palm Beach County as an example
Palm Beach County's Expedited Solar PV Permit checklist shows the level of detail Florida reviewers expect. To qualify for the expedited path, the contractor must certify, among other things, that:
- The home is a detached single-family dwelling or freestanding accessory structure, legally permitted
- The roof is framed with wood trusses or rafters no more than 24 inches on center and is in satisfactory condition
- The design wind speed is 170 mph (ultimate), Exposure B or C, and the mounting system is site-specifically engineered to those pressures
- No point load at an attachment exceeds 50 pounds, and the distributed load does not exceed 5 pounds per square foot
- The array is set back at least 3 feet from all roof edges, cantilevers no more than 6 inches past the anchors, and sits no more than 12 inches above the roof surface
- The added PV load is limited to 10 kW, uses 4 or fewer series strings per inverter, and the system is FSEC certified or designed by an appropriate licensed professional
- A solar (CVC) contractor subcontracts an electrical contractor (no-fee sub permit) for the final utility-interactive connection
- Photos of each installation phase are provided, and the qualifier signs a certification of installation for the final inspection
The county's Building Code Advisory Board also issued a July 19, 2023 technical advisory saying that only rooftop PV attachments to roof structural members (trusses or rafters) with lag screws had been validated to resist the county's design wind loads. It warned that UL 2703 does not cover roof attachments and that mounting components should hold a Florida-approved evaluation report. Deck-only attachments had not produced enough load-resistance data. Ask your installer how its attachments are approved for your county's wind speed. For more, see solar panels and hurricane wind ratings.
FSEC certification and Statute 377.705
Florida Statute 377.705, the Solar Energy Standards Act of 1976, requires solar energy systems manufactured or sold in Florida to meet Florida Solar Energy Center standards and display approved performance test results, unless certified by a Florida-licensed engineer using the Florida Building Code. The statute's definitions focus on solar thermal systems, but Miami-Dade applies the rule to PV permits: its electrical plan review list requires either an FSEC Photovoltaic System Certification approval form or a note on the sealed plans in which the engineer certifies, per Statute 377.705, that the PV electrical system and components are designed using the Florida Building Code. Palm Beach County's expedited checklist likewise asks that the system be FSEC certified or designed by an appropriate licensed professional. Expect a similar requirement elsewhere and ask your building department.
What a Florida solar permit package usually includes
Requirements vary by jurisdiction. This list combines items from Miami-Dade's and Palm Beach County's published solar checklists. Your installer should prepare all of it.
- Building permit application, signed by owner and contractor (Miami-Dade requires notarization)
- Electrical permit or fee sheet for the PV work
- Site plan and roof plan showing roof shape, dimensions, exposure category, wind speed, pressure zones, array layout, and racking and attachment locations
- Structural calculations and an engineered attachment detail for every component in the wind load path, signed and sealed where required
- Roof penetration flashing details matched to your roof type (shingle, tile, metal or low-slope)
- Electrical riser (one-line) diagram from the array to the utility meter, with wire sizes, grounding and bonding
- Point of connection details, including supply-side or load-side connection and busbar and main breaker sizing
- Rapid shutdown, arc-fault and ground-fault protection details
- Existing service and load calculations showing how the PV output affects the panel
- Required warning labels and placards
- Manufacturer data sheets and listings (module and racking fire and safety listings such as UL 1703 and UL 2703, and a Florida product approval or evaluation report for attachments where required)
- FSEC certification or the engineer's Statute 377.705 note
- Owner disclosure form where required (Miami-Dade)
- Notice of Commencement before the first inspection, when required (next section)
Listing standards change with code editions. If a data sheet lists a different module safety standard than your building department's checklist, ask the reviewer before submitting.
Notice of Commencement: do you need one for solar?
A Notice of Commencement (NOC) is a short form recorded with the county clerk that tells subcontractors and suppliers who the owner and contractor are. It is part of Florida's Construction Lien Law, which protects people who supply labor and materials and, if you follow it, protects you from paying twice.
The thresholds
- $2,500 or less: Statute 713.02(5) exempts improvements with a direct contract price of $2,500 or less from most of the lien law, including the NOC requirement in 713.13.
- More than $5,000: Statute 713.135(1)(e) requires the permit applicant to file a copy of the recorded NOC with the building department before the first inspection. If it is not filed, neither the building department nor a private provider may perform or approve later inspections until it is.
- The $15,000 exception is not for solar. Statute 713.135 says that subsection does not apply to a direct contract to repair or replace an existing heating or air-conditioning system under $15,000. A solar contract does not fit that exception.
Almost every home solar contract is over $5,000, so plan on an NOC.
How it works
- The owner (or authorized agent) signs the NOC. It lists the property's legal description and folio number, a description of the improvement, the owner, the contractor and any surety on a payment bond.
- Record it with the county clerk and post a certified copy (or a notarized statement that it was filed, plus a copy) at the job site.
- File a copy with the building department before the first inspection.
- If work does not start within 90 days of recording, the NOC is void (Statute 713.13(2)).
Florida permit cards must carry this warning in bold capitals: "YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY." The issuing authority must also give you a DBPR-prepared summary of the Construction Lien Law. Read it. If you receive a Notice to Owner from a supplier, keep it and ask your installer for lien releases from that supplier before final payment. Our guide to choosing an installer covers payment schedules.
Inspections: what happens and in what order
- Rooftop in-progress inspection (structural and roofing). Miami-Dade generates this when "Roof Mounted" is selected on the electrical fee sheet. The inspector checks attachments, flashing and racking before panels hide them.
- Electrical inspection(s). Conduit, wiring, grounding, disconnects, labels and the connection to your panel or service.
- Final inspection. Palm Beach County's expedited path requires the qualifier's signed certification of installation, accepted at final, plus site-specific photos of each phase: rack attachments to structural members, module attachment to rails, bonding, and connections at the combiner, inverter, transfer switch, panel and utility point.
- Utility steps. After the permit passes, the utility reviews the interconnection and installs or programs the meter. For example, the Orlando Utilities Commission requires a passed permit inspection, an itemized signed invoice and a sealed one-line diagram with the online application, and FPL says customers must apply for net metering before installing. Do not turn the system on for export until the utility approves.
If you use a private provider, the provider performs these inspections and posts records. Inspections can be virtual under Statute 553.791.
Do you need a permit for a battery in Florida?
Plan on it. Florida's private provider statute names "solar energy and energy storage installations or alterations" as single-trade work handled through the permit process, which reflects how building departments treat batteries: as permitted electrical work. Adding a battery to an existing solar system also usually changes the electrical design and may change your utility agreement. Tampa Electric, for example, says batteries are interconnected but not net metered. Ask the building department whether your battery needs a separate permit or a revision to the solar permit, and ask the utility whether it needs a new application. See home battery types and sizing and battery backup for hurricanes and outages.
How to check a property's solar permit history
- Miami-Dade: the county's building permit search lets you look up permit history by address or folio, as shown in its PV workshop.
- Tampa: search permits by address in Accela Citizen Access.
- Orlando: use the City's online permit status lookup.
- Jacksonville: search records in JaxEPICS.
- Elsewhere: your city or county building department's online portal, or a public records request.
Look for a solar or PV electrical permit with a final inspection marked passed. "Issued" is not the same as "finaled." If you are buying a home with panels, ask the seller for the permit number, final inspection record and utility interconnection agreement. See selling or buying a home with solar.
What if your installer never pulled a permit?
An unpermitted system can cause real problems: the utility may refuse interconnection, an insurer may question a claim, and a buyer's inspector may flag it. Steps to take:
- Search the permit portal for your address. Ask the installer in writing for the permit number.
- If none exists, contact your building department about an after-the-fact permit. Expect plan review and inspections of finished work, which may mean removing some panels so attachments can be checked.
- Check the installer's license on the DBPR site. Unlicensed contracting is a crime in Florida under Statute 489.127, and the penalties rise during a declared state of emergency.
- File complaints with DBPR (licensing) and, if the sale involved misrepresentation, the Florida Attorney General or the Department of Agriculture and Consumer Services. See our solar complaints guide.
- Talk to an attorney if the installer will not fix it, especially if you received lien notices.
After a hurricane: removing and reinstalling panels
Statute 553.7922 says that after a declared state of emergency for a natural emergency, affected local governments must approve special procedures to expedite permits that do not require technical review, such as roof repairs, reroofing, electrical repairs and service changes. They may waive fees for those permits. Removing and reinstalling a solar array for a roof replacement usually needs structural and electrical review, so it may not qualify for the fast track. Ask your building department. Beware of unlicensed storm-chasing contractors: unlicensed contracting during a declared emergency is a felony under 489.127. See solar panel removal, reinstall and repair.
How to choose a provider
- Confirm whether your address is inside a city or in unincorporated county territory.
- Verify the installer's solar or electrical contractor license on the DBPR site.
- Ask which permit path the installer will use: building department review or a private provider.
- In Miami-Dade or Broward, confirm the plans are signed and sealed for HVHZ wind pressures.
- Ask how roof attachments are approved for your county's design wind speed and your roof type.
- Decide on a reroof first if the roof will not outlast the solar system.
- Sign the Notice of Commencement, record it, post it, and make sure a copy reaches the building department before the first inspection.
- Keep copies of the permit, approved plans, inspection results and final sign-off.
- Collect lien releases from any supplier who sent you a Notice to Owner before final payment.
- Do not export power until the utility gives written approval.
- Look up the permit online after final to confirm it shows passed, not just issued.
- For a battery added later, ask whether a new permit and a new utility application are needed.
Related residential solar installers guides
- What Is Solar Permission to Operate, and How Long Does Interconnection Take?
- Florida Solar Contractor Licenses: Who Can Legally Install Solar in Florida
- Can Solar Panels Survive a Hurricane? Wind Ratings, Codes and What Fails
- Should You Replace Your Roof Before Solar? Roof Age, Re-Roofing and Removal Costs
- HOA Solar Rules in Texas and Florida: What Your HOA Can and Cannot Do
- How Do I Choose a Solar Installer in Texas or Florida?
- Florida Utility Solar Rules: How Do FPL, Duke, TECO, JEA, OUC and the Co-ops Treat Rooftop Solar?
- Do I Need a Solar Permit in Texas? Houston, Dallas, San Antonio, Austin and Rural Areas
Residential solar installers by state and city
Questions people ask
Do I need a permit for solar panels in Florida?
Yes. A rooftop or ground-mounted solar system connected to your home needs a building permit from your city or county building department, which reviews structural, roofing and electrical plans under the Florida Building Code. Your installer usually applies. Utilities then require their own interconnection approval before you export power. Florida Statute 163.04 bars local ordinances that prohibit solar, but it does not remove permit requirements.
Does Florida have a statewide solar permit rule?
Not a solar-only one that we could find. Statute 553.792 sets general permit deadlines: a 5-business-day completeness notice, then 30 business days for residential and electrical permits under 7,500 square feet, with fee reductions when deadlines are missed. Statute 553.791 names solar and energy storage as single-trade work, which gives private provider applications a 5-business-day completeness review for one- and two-family homes.
What is Florida's private provider option for inspections?
Statute 553.791 lets a property owner, or the contractor with written authorization, hire a licensed building code administrator, engineer or architect to perform plan review, inspections, or both. The building department still issues the permit but cannot redo the provider's review. For solar on a single-family or two-family home, the department must flag incomplete forms within 5 business days or the permit is deemed approved.
How long do Florida solar permits take?
It depends on the jurisdiction and the path. Under Statute 553.792, the building department must tell you within 5 business days whether the application is complete, and generally decide within 30 business days for residential electrical permits on homes under 7,500 square feet. Local rules are often faster. With a private provider and a sealed engineer affidavit, the department must act within 10 business days or the permit is deemed approved.
Do Florida solar permits require wind load engineering?
Yes. The Florida Building Code's wind standard includes specific criteria for rooftop solar panels. Miami-Dade and Broward are in the High Velocity Hurricane Zone and require signed and sealed plans that address HVHZ wind pressures and roof pressure zones. Palm Beach County's expedited solar checklist uses a 170 mph design wind speed and requires the mounting system be site-specifically engineered to it.
What inspections are required for solar in Florida?
Usually a rooftop in-progress inspection of attachments, flashing and racking before panels cover them, one or more electrical inspections, and a final inspection. Some jurisdictions, such as Palm Beach County's expedited path, also require site-specific photos of each phase and a signed installation certification from the contractor. A private provider may perform these inspections, in person or virtually.
What is a Notice of Commencement and do I need one for solar?
It is a form recorded with the county clerk under Florida's Construction Lien Law, listing the owner, contractor and property. If the direct contract is over $5,000, Statute 713.135 requires a copy be filed with the building department before the first inspection, and later inspections cannot be approved without it. The $15,000 exception applies only to repairing or replacing heating or air-conditioning systems, not solar.
How do I get a solar permit in Miami-Dade?
In unincorporated Miami-Dade, the contractor submits a notarized building permit application, an electrical fee sheet under Category 34 Solar Photovoltaic with Roof Mounted selected, and signed and sealed plans. Plans are reviewed for structural, roofing and electrical compliance at the same time through Concurrent Plans Processing. The owner signs a Solar System Disclosure Form. Homes inside a city such as Miami use that city's building department.
What does Jacksonville require?
Jacksonville's Building Inspection Division requires online electronic submission for all permit types through JaxEPICS. It has a private provider section for owners who use private inspection services. Its website said permits submitted on or after January 1, 2024 must comply with the Florida Building Code 8th Edition (2023), so confirm which edition applies on your application date. JEA handles the separate utility interconnection.
Do I need a permit for a battery in Florida?
Expect one. Florida's private provider law lists solar energy and energy storage installations as single-trade permit work, and batteries change your electrical system. Ask the building department whether adding a battery needs its own permit or a revision to the solar permit, and ask your utility whether it needs a new interconnection application. Tampa Electric, for example, interconnects batteries but does not net meter them.
Can I check solar permit history online?
Usually yes. Miami-Dade offers a building permit search, Tampa uses Accela Citizen Access, Orlando has an online permit status tool, and Jacksonville uses JaxEPICS. Search by address and look for a solar or PV permit with a passed final inspection, not just an issued permit. Elsewhere, use the local building department's portal or make a public records request.
Sources
- Florida Statutes 553.791, Alternative plans review and inspection
- Florida Statutes 553.792, Building permit application to local government
- Florida Statutes 553.7922, Local government-expedited approval of certain permits
- Florida Statutes 713.13, Notice of commencement
- Florida Statutes 713.135, Notice of commencement and applicability of lien
- Florida Statutes 713.02, Types of lienors and exemptions
- Florida Statutes 163.04, Energy devices based on renewable resources
- Florida Statutes 377.705, Solar Energy Standards Act
- Florida Statutes 489.103 (owner-builder exemption, solar)
- Florida Statutes 489.105 (definition of solar contractor)
- Florida Statutes 489.113 (solar contractor minor work)
- Florida Statutes 489.127 (unlicensed contracting penalties)
- Miami-Dade RER: Solar Photovoltaic Permitting and Plan Submittal Requirements (workshop presentation)
- Miami-Dade County Building (permits portal)
- Palm Beach County Expedited Solar PV Permit Checklist, Worksheet and Certification
- Palm Beach County Building Code Advisory Board: Rooftop Solar Technical Advisory (July 19, 2023)
- Florida Building Commission: ASCE 7-16 Fact Sheet (FBC 7th Edition 2020)
- Florida Building Commission: Analysis of Changes, 9th Edition (2026) FBC Residential
- City of Tampa Construction Services
- City of Orlando Permits and Inspections
- City of Jacksonville Building Inspection Division
- OUC: How to apply for your home solar
- FPL: Net metering
- Tampa Electric: Solar incentives and net metering
- Miami-Dade County: Florida Building Code 9th Edition code change notice
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


