New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Residential solar installers

Can Solar Panels Survive a Hurricane? Wind Ratings, Codes and What Fails

Why panel pressure ratings are not wind speeds, how Florida's HVHZ and Texas windstorm rules shape solar installs, and what to do before and after a storm.

Yes, rooftop solar can survive hurricane winds when the whole load path, from module and clamps to rails and attachments screwed into rafters or trusses, is engineered for your site's code wind speed and roof zone. Panels are not rated in mph: their lab load ratings in pascals must exceed the design pressure where they sit. Miami-Dade and Broward are in the High Velocity Hurricane Zone, with design wind speeds of 175 and 170 mph.

Key facts

  • Florida's HVHZ is Miami-Dade and Broward counties; Risk Category II design wind speeds are 175 mph and 170 mph (FBC 1620.2).
  • Palm Beach County's expedited solar checklist uses a 170 mph design wind speed and requires engineered attachment details for every load-path component.
  • ASCE 7-16, adopted in the 2020 Florida Building Code, added wind-load methods specifically for rooftop solar panels.
  • Palm Beach County's advisory board said in July 2023 that only truss or rafter attachments with lag screws had been validated for its design wind loads.
  • UL 2703 covers PV mounting and clamping parts but its scope excludes roof attachments.
  • IBHS cites claims data showing up to 90% of hurricane-related claims include roof damage.
  • Florida insurers must offer hurricane deductibles of $500, 2%, 5% and 10% of dwelling limits, applied per calendar year (s. 627.701).
  • Florida requires notice of a property insurance claim within 1 year of the loss (s. 627.70132).
  • TDI requires one engineer or inspector to file windstorm certification for a combined re-roof and solar job on TWIA-insured property.

Can solar panels withstand hurricane winds?

A well-engineered, properly attached rooftop array can survive strong hurricane winds. But "the panels are rated for 140 mph" is not how it works. Survival depends on a chain of parts: the module, the clamps that hold it, the rails, the roof attachments, the screws into the rafters or trusses, and the roof itself. The array is only as strong as the weakest link in that load path.

In Florida and on the Texas Gulf Coast, building codes require that load path to be designed for the site's wind speed, roof zone and exposure. When arrays fail in storms, it is usually because a connection, an attachment or the roof deck underneath gave way, or because debris struck the glass.

That is why the best predictor of how your array will do in a hurricane isn't the panel brand. It's whether the installation was engineered and permitted for your exact roof, then inspected.

Panel pressure ratings vs wind speed: what's the difference?

Two different numbers get mixed up in sales pitches.

Design wind speed (mph)

Codes assign each location a basic design wind speed, a 3-second gust speed from maps in ASCE 7, the national structural loads standard that the Florida Building Code uses. Examples from the Florida Building Code: in the High Velocity Hurricane Zone, the design wind speed for ordinary (Risk Category II) buildings is 175 mph in Miami-Dade and 170 mph in Broward. Palm Beach County's expedited solar permit checklist uses 170 mph. Inland and northern locations have lower speeds.

Design wind pressure (psf or pascals)

An engineer converts that wind speed into a pressure acting on each part of the roof. Pressure depends on roof height, roof shape, slope, the surrounding terrain (called exposure, such as Exposure B for suburbs or C for open land and coast), and where on the roof the array sits. Corners and edges see much higher uplift than the middle.

Module test load (pascals)

Panel spec sheets list a mechanical load in pascals (Pa), from testing under standards such as IEC 61215 and UL 61730. It's the pressure the module passed in a lab, often with separate front (snow) and rear (uplift) values. It is a property of the module and its clamping method, not a wind speed.

What matters: the module's tested load, at the clamp locations the manufacturer allows, must equal or exceed the design pressure for the roof zone where that module sits. If a module is placed in a high-pressure corner zone it isn't rated for, it can fail. Miami-Dade lists exactly this among its common plan rejections: "PV modules are not rated for the wind pressure zones they are installed in."

Does the Florida Building Code cover solar panels?

Yes. Rooftop solar is a structure attached to a building and must meet the Florida Building Code's structural and roofing rules, plus the electrical code.

  • Wind loads: ASCE 7-16, adopted in the 7th Edition (2020) Florida Building Code, added wind load criteria written specifically for rooftop solar. One method covers arrays on low-slope roofs; the other covers panels installed close to and parallel with sloped roofs, as on most homes. It adjusts for pressure equalization (air pressure partly balancing above and below the panel) and for distance to roof edges.
  • Roof zones: ASCE 7-16 changed the roof zones. Corner zones on sloped roofs include zones labeled 3e (eave) and 3r (ridge), and edge zones include 2r, 2n and 2e. Your installer's plans should show which zones hold panels.
  • 2026 code: the 9th Edition (2026, effective for permit applications submitted on or after December 31, 2026) Florida Building Code, Residential, based on the 2024 IRC, adds requirements for elevated PV support structures, PV panels over open-grid framing and over roof assemblies (R324.8), and flashing rules for PV panels (R905.17.5).
  • Fire classification: Miami-Dade's PV workshop materials note that rooftop PV systems must carry the same fire classification as the roof assembly.

Your permit plans should be prepared for your county's wind speed. Miami-Dade requires signed and sealed plans by a design professional.

What is the HVHZ and how does it affect solar in Miami-Dade and Broward?

The High Velocity Hurricane Zone (HVHZ) is Miami-Dade and Broward counties. It has the state's strictest wind and roofing rules (Florida Building Code Chapters 15 and 16 HVHZ sections).

Miami-Dade's solar plan reviewers list these frequent reasons for rejecting PV plans:

  • Plans that do not address HVHZ wind pressures.
  • Roof pressure zones not calculated or shown correctly.
  • Modules and racking not rated for the pressure zones they sit in.
  • Connections that don't meet HVHZ Chapter 16 wind load requirements.
  • Roof penetration and flashing details that don't meet HVHZ Chapter 15 roofing rules. All roof flashings, including PV penetrations, must meet the HVHZ wind load requirements.

Do solar parts need Miami-Dade product approval (NOA)?

Florida's product approval rule (61G20-3) includes "structural components" as a category. Palm Beach County's Building Code Advisory Board advised in July 2023 that PV mounting components should hold a current Florida-approved evaluation report, such as a Florida Product Approval (FL number), a Miami-Dade Notice of Acceptance (NOA), or an ICC-ES report, and that each report's limits of use be checked. Exactly which approvals your building department requires for racking and attachments varies, so ask the permit office or your engineer. A Miami-Dade NOA is one accepted route, not the only one in most places.

How are racking systems attached to resist uplift?

On a typical sloped residential roof:

  1. Attachments (also called mounts, feet or standoffs) are fastened through the roof covering into rafters or trusses, then sealed with flashing, a metal or engineered piece that sheds water around the penetration.
  2. Rails run across the attachments. Some systems are "rail-less" and clamp panels directly to the mounts.
  3. Clamps hold the panel frames to the rails at locations the panel maker allows.

Into rafters, not just plywood

Palm Beach County's July 2023 advisory said that only attachments to roof structural members (trusses or rafters) with lag screws had been validated to resist the county's design wind loads. Products using deck-only (sheathing) attachments had not produced enough load-resistance data. It added that site-specific engineering showing a continuous load path to the foundation may be accepted by the building official.

UL 2703 does not cover roof attachments

Many sales sheets say a racking system is "UL 2703 listed." The same advisory points out that UL 2703's scope excludes roof attachments for above-roof mounting. The listing covers the rail, clamping and grounding parts, not how strongly the system is anchored to your roof.

Edge and corner zones

Because uplift is highest near roof edges, ridges and corners, engineers often require closer attachment spacing in those zones, or keep panels out of the corner zones entirely. Palm Beach County's checklist requires an engineered attachment detail for every component in the load path.

Fire setbacks and access pathways from the fire code also shape the layout. Ask to see the layout drawing with zones and spacing marked.

Will solar panels make my roof more likely to fail in a hurricane?

Not if they are installed correctly. A properly flashed attachment into structure doesn't weaken the roof. Problems come from:

  • Attachments that miss the rafters or trusses and hold only in sheathing.
  • Poor flashing that lets water in, rotting the deck over time and weakening it before the next storm.
  • Arrays installed on a roof that was already near the end of its life.

The Insurance Institute for Business and Home Safety (IBHS) cites claims data showing up to 90% of hurricane-related claims include roof damage. That makes roof condition the bigger hurricane question for most homes. See roof condition and re-roofing before solar.

Should I remove solar panels before a hurricane?

No. Removing an array is a permitted job for a licensed contractor, it takes time, and it creates roof penetrations that must be sealed. A properly engineered array is designed to stay in place. Instead:

  • Clear loose items in the yard that could become debris.
  • Photograph the array and roof for your insurance records.
  • Charge your battery if you have one.
  • Do not climb on the roof to "secure" panels. Ladders and roofs in pre-storm wind are a serious fall risk.

If an installer offers to "storm-proof" your array right before a hurricane, ask what work will be done, whether a permit is needed, and see the contractor's license. Florida makes unlicensed contracting during a declared state of emergency a third-degree felony (s. 489.127).

Are solar panels a projectile risk?

An array that tears loose can become wind-borne debris. That is why codes focus on the load path and why loose or damaged panels after a storm should be treated as a hazard. More often, panels are the target: flying shingles, branches and other debris can crack the glass. Ground mounts and arrays near trees have extra exposure. The best prevention is engineered attachment, trimming trees near the roof, and inspection after major storms.

Do ground mounts survive hurricanes?

Ground-mounted arrays must also be designed for local wind loads, with foundations (driven posts, helical piles or concrete) sized for uplift and soil conditions. The 2026 Florida residential code clarifies the ground-mounted PV section applies to PV panel systems and adds rules for elevated PV support structures. Ground mounts avoid roof penetrations but are lower to the ground and can be in flood paths. See ground mount vs roof mount and solar in flood and surge zones.

Texas Gulf Coast: windstorm certification and solar

Along the Texas coast, wind and hail insurance often comes from the Texas Windstorm Insurance Association (TWIA). Under Insurance Code chapter 2210, TWIA requires a Windstorm Certificate of Compliance (WPI-8) showing the property meets windstorm building code requirements. TWIA lists roof replacement and significant roof repair among the work that needs one. The Texas Department of Insurance runs the Windstorm Inspection Program and issues all certificates.

For solar, TDI's April 2023 windstorm newsletter said many owners install roof-mounted solar on TWIA-insured buildings. When a project includes a re-roof plus solar, inspectors may inspect both, but only one engineer or inspector may file the application for the full scope, described for example as "Entire re-roof and solar panel installation." A later re-roof on a home with certified solar must be described as including panel removal and reinstallation. Ask your installer how they will handle windstorm inspection before work starts. Questions go to windstorm@tdi.texas.gov or 800-248-6032, option 3.

For Houston and Gulf Coast hurricane outages, see our Houston solar guide.

What fails on solar arrays in hurricanes?

Plan reviewers' rejection lists point to the weak spots: wrong roof zones, modules or racking not rated for their zone, and connections or flashing that don't meet HVHZ rules. Palm Beach County's advisory highlights deck-only attachments that lacked load-resistance data. Recent storms show the stakes: NOAA NCEI lists Hurricane Ian (Category 4, 150 mph at landfall near Cayo Costa in 2022) at $119.6 billion and Hurricane Milton (Category 3, 120 mph, near Siesta Key in 2024) at $34.3 billion in CPI-adjusted costs.

We did not find a public, primary post-storm study of residential solar failures in Florida that we could verify for this guide, so we don't quote failure rates. Be skeptical of anyone who quotes a precise "survival rate."

How to inspect solar after a hurricane, and who pays

Safety first

  • Do not touch damaged panels or loose wiring. Panels produce DC voltage whenever light hits them, even when the system is shut off.
  • If safe, turn off the system using the rapid shutdown switch outside the home.
  • Stay off the roof. Look from the ground and take photos.
  • If equipment was flooded, leave it off until it's inspected.

Signs of damage

Missing or shifted panels, cracked glass, bent rails, lifted flashing, roof leaks near mounts, inverter error codes, or a production drop in your monitoring app.

Insurance claim steps

  1. Tell your insurer quickly. Florida law requires notice of a property claim within 1 year after the date of loss, and supplemental claims within 18 months (s. 627.70132).
  2. Document everything with photos and video. Prevent further damage, such as tarping, and keep receipts; TDI notes your policy may pay for temporary repairs.
  3. Know your hurricane deductible. Florida insurers must offer hurricane deductibles of $500, 2%, 5% and 10% of dwelling limits (with exceptions), and the hurricane deductible applies once per calendar year across covered hurricane losses (s. 627.701).
  4. Get your installer to inspect and quote repairs, and share it with the adjuster. Insurance Journal reports that, for leased systems and PPAs, the equipment provider typically insures the system.
  5. Watch for contractor solicitation. Florida's s. 489.147 restricts roof contractors that urge you to file claims, and lets you cancel a roof contract signed within 180 days of a declared emergency within 10 days or before work starts, whichever is first.

Who pays depends on your policy. Many homeowners policies cover attached solar as part of the dwelling, but you should confirm. See solar and homeowners insurance. For Texas, TDI's consumer line is 800-252-3439; for Florida, the Department of Financial Services consumer helpline handles insurance questions. For disputed claims, consider a licensed public adjuster or an attorney.

How to choose a provider

  • Ask for the site's design wind speed, exposure category and the roof zones on the layout drawing.
  • Check that module load ratings (in Pa) meet the design pressure for each roof zone used.
  • Confirm attachments go into rafters or trusses, and get the attachment detail and spacing.
  • Ask for the product approval or evaluation report (FL number, NOA or ICC-ES) for mounts and racking.
  • In Miami-Dade and Broward, confirm plans address HVHZ Chapters 15 and 16.
  • On the Texas coast, ask how windstorm (WPI-8) inspection will be handled.
  • Get the permit number and keep the final inspection record.
  • Before storm season, trim trees near the array and photograph the system.
  • After a storm, stay off the roof, use rapid shutdown if safe, and photograph damage.
  • Report claims promptly and know your hurricane or wind deductible.

Related residential solar installers guides

Residential solar installers by state and city

Questions people ask

What wind speed are solar panels rated for?

Panels aren't rated in mph. Spec sheets list a mechanical load in pascals from lab tests such as IEC 61215 and UL 61730. The wind speed comes from your location's code map: 175 mph in Miami-Dade and 170 mph in Broward for typical homes in the HVHZ. An engineer turns that speed into pressure for each roof zone, and the panel and racking must be rated for that pressure.

Is 'UL 2703 listed' racking hurricane-proof?

No. UL 2703 covers mounting, clamping and grounding parts. Palm Beach County's building advisory board notes its scope excludes roof attachments. Wind resistance depends on the engineered attachment into rafters or trusses, the roof zone, and spacing. Ask for the product approval or evaluation report and the engineer's attachment detail.

Do I need engineered plans for solar in Florida?

In many counties, yes. Miami-Dade requires one set of signed and sealed plans by a design professional. Palm Beach County's expedited checklist requires the mounting system to be site-specifically engineered to its 170 mph wind loads. Check your county's solar permit checklist.

Will my insurance go up if I add solar?

It can, since solar adds value to the dwelling that must be insured. Tell your insurer before installation; Insurance Journal reports many carriers extend homeowners coverage to the equipment. Ask whether your dwelling limit should rise and how your hurricane deductible applies to solar damage.

Should I tarp my solar panels before a storm?

No. Tarps catch wind and can add load to the array. Leave the array alone and let the engineered design do its job. Focus on clearing yard debris, documenting the system with photos and charging any battery. Climbing a roof before a storm is a fall risk, and anything tied to panels or rails could damage the clamps or the glass.

Can a damaged array be repaired, or must it be replaced?

Often individual panels, clamps or rails can be replaced. Matching an older panel model can be hard, which can force replacing more modules than were damaged. Your installer should quote the repair, and the insurer decides what the policy pays. See our removal, reinstall and repair guide.

Does the TWIA windstorm certificate apply to solar?

TDI's windstorm program treats rooftop solar on TWIA-insured buildings as part of certified work. When a re-roof and solar are done together, one engineer or inspector files a single application for the whole scope. Ask the installer how they'll handle windstorm inspection before the job starts.

Who is liable if my solar damages a neighbor's house in a storm?

Liability depends on facts and policies. Damage from a properly installed array in a storm is often treated like other storm debris, but negligent installation can change that. Notify your insurer and keep installation records and permits. For a real dispute, talk to your insurer and, if needed, an attorney.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration