New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Standby generator installation

Who Can Legally Install a Standby Generator in Texas?

A Texas generator install usually involves three state licensing systems: TDLR for the electrical work, the Railroad Commission for propane, and the plumbing board for natural gas piping. Here is who needs which license, how to look each one up, and what changed in 2025.

In Texas, the electrical work for a standby generator must be done by a TDLR-licensed electrical contractor using licensed electricians, under Occupations Code chapter 1305. Propane tanks and LP-gas piping require a Railroad Commission license and certified workers under Natural Resources Code chapter 113. Natural gas piping is plumbing under Occupations Code 1301, done by plumbers licensed by the Texas State Board of Plumbing Examiners. SB 1252 (2025) limited city rules but did not remove state licensing.

Key facts

  • Texas Occupations Code 1305.151 bars any person or business from performing or offering to perform electrical work without a license under chapter 1305, except as exempted in 1305.003.
  • An electrical contractor license requires being, or employing, a licensed master electrician, plus proof of financial responsibility (1305.159).
  • TDLR requires Texas electrical contractors to carry liability insurance of at least $300,000 per occurrence, $600,000 aggregate and $300,000 aggregate for products and completed operations.
  • A master electrician needs two years as a journeyman and 12,000 hours of on-the-job training; a journeyman needs 8,000 hours (TDLR).
  • TDLR says that even after SB 1252 (2025), non-exempt electrical work on residential energy backup systems must be performed by licensed Texas electrical contractors with licensed electricians.
  • Natural Resources Code 113.081 requires a Railroad Commission license to install LP-gas containers, systems, piping and appliances.
  • An RRC Category D license (general installers and repairmen) costs $100 originally and $70 to renew under 16 TAC 9.6; all RRC certifications expire May 31 each year.
  • Occupations Code 1301.002 defines plumbing to include piping outside a building that connects it to a gas supply on the premises.
  • Electrical work without a required license is a Class C misdemeanor under Occupations Code 1305.303.

The three-license reality of a Texas generator install

A home standby generator is an electrical appliance, a fuel-burning engine and a gas appliance at the same time. Texas splits oversight of those trades among three state agencies. A single company may hold all three credentials, or it may use licensed subcontractors. Either way, every part of the job should trace back to a license you can look up.

Part of the jobWho regulates itLicense the work needsLaw
Transfer switch, generator wiring, panel and service workTexas Department of Licensing and Regulation (TDLR)Electrical contractor license, with work done by licensed master, journeyman or residential wireman electricians and supervised apprenticesOccupations Code ch. 1305
Propane tank setting, LP-gas piping and regulator, connecting the generator to propaneRailroad Commission of Texas (RRC), Alternative Fuels SafetyRRC company license (such as Category D or E) plus RRC-certified employees, or a registered plumber/ACR exemptionNatural Resources Code ch. 113; 16 TAC ch. 9
Natural gas piping from the meter to the generatorTexas State Board of Plumbing Examiners (TSBPE)Licensed plumber (master, journeyman or other class allowed for the work)Occupations Code ch. 1301
Gas meter upgrade, service lineYour gas utilityUtility's own crews or contractorsUtility tariff
Permits and inspectionCity, county or approved third partyPermit pulled by the licensed contractorLocal code; LGC 247.0025 (2025)

The most common gap we see in quotes is a company that is a factory-authorized dealer for a generator brand but lists no electrical contractor license of its own. Brand authorization is a sales and training relationship with the manufacturer. It is not a state license. Ask for license numbers before you sign.

The electrical side: TDLR licenses under Occupations Code 1305

Texas requires a state license to do electrical work, and the rule reaches companies as well as workers. Section 1305.151 says a person or business "may not perform or offer to perform electrical work" without the appropriate license, unless an exemption in 1305.003 applies.

Electrical contractor vs master electrician

These are two different credentials, and the difference trips people up.

  • Electrical contractor is the business license. Under 1305.159, the applicant must be a licensed master electrician or employ one, show proof of financial responsibility, and either carry workers' compensation or formally elect not to. TDLR's application page sets the insurance minimum at $300,000 per occurrence, $600,000 aggregate and $300,000 aggregate for products and completed operations.
  • Master electrician is the top individual license. TDLR requires at least two years as a licensed journeyman and 12,000 hours of on-the-job training under a master electrician; the application fee is $45. A master may be assigned to only one electrical contractor unless the master owns more than 50 percent of the business (1305.159(b)).
  • Journeyman electrician requires 8,000 hours of supervised on-the-job training (TDLR lets applicants sit for the exam at 7,000 hours); the fee is $30.
  • Residential wireman may only do electrical installations in single-family and multifamily dwellings up to four stories (1305.002). It needs 4,000 hours of training or a career and technology program, plus an exam (1305.157).
  • Electrical apprentice has no experience or exam requirement and costs $20, but an apprentice must be engaged in learning under the supervision of a licensed master electrician (1305.161).

So the company on your contract should hold an electrical contractor license, and the people on site should hold individual licenses. An apprentice on your job is normal as long as licensed electricians supervise.

State license vs city license

TDLR's FAQ explains that a municipal electrician's license only allows work in the city that issued it, while a state license is valid anywhere in Texas. If a Houston-area installer shows you a city card, confirm they also hold a state license before they work in a different city or in unincorporated county land.

What SB 1252 and SB 1202 changed in 2025, and what they did not

Two 2025 laws changed how generator and battery backup projects are permitted in Texas. Neither one lets unlicensed people do the electrical work.

SB 1252: limits on city rules for residential energy backup systems

SB 1252 defines a "residential energy backup system" as a backup energy system at a residence that can provide no more than 50 kW or has storage capacity of no more than 100 kWh. Most home standby generators fall under that 50 kW line. The bill bars Texas cities from adopting or enforcing National Electrical Code amendments, ordinances or rules that would regulate installation or inspection of those systems, effective for installations or inspections started on or after Sept. 1, 2025. It does not limit a municipally owned utility, such as those serving Austin and San Antonio, from regulating installation or inspection in its own service area.

TDLR published guidance on Aug. 14, 2025: all non-exempt electrical work on residential energy backup systems must still comply with Occupations Code chapter 1305 and the National Electrical Code and be performed by licensed Texas electrical contractors with licensed electricians. In other words, SB 1252 changed what cities can add, not who is allowed to do the wiring.

SB 1202: third-party review and inspection

SB 1202 added Local Government Code 247.0025, which lets a qualified third party review plans for and inspect a "home backup power installation" serving a one- or two-family dwelling at 600 volts or less. Qualified reviewers include a licensed electrical inspector or a Texas-licensed master electrician, among others. Once the third party approves, the city or county must issue the approval within three business days after notice, and construction may begin once the approval notice is submitted. The third party, not the city, is liable for a negligent review.

For homeowners, the practical point is this: a master electrician may now act as a third-party inspector. Ask whether the inspector is independent of the company that did your installation, and keep the inspection paperwork. See Texas generator permits for the full permitting process.

Propane work: Railroad Commission LP-gas licenses and certifications

In Texas, propane (liquefied petroleum gas, or LP-gas) is regulated by the Railroad Commission's Alternative Fuels Safety department, not by TDLR or the plumbing board. Natural Resources Code 113.081 says a person may not engage in container activities (including installation of containers) or systems activities (including "the laying or connecting of pipes and fittings" serving LP-gas systems and appliances) without an RRC license.

The RRC uses a two-layer system:

  • Company license. Companies, including sole proprietors, need an RRC license to install, service, sell or repair LP-gas equipment. Under 16 TAC 9.6, a Category D (general installers and repairmen) license authorizes selling, servicing and installing LP-gas containers and installing and repairing piping and appliances; the original fee is $100 and renewal is $70. A Category E (retail and wholesale dealer) license covers storing, selling, transporting and distributing LP-gas and most other activities; it costs $750 originally and $300 to renew.
  • Individual certification. Workers need RRC certification by exam. The Service and Installation certification (exam B-3) qualifies an individual for all LP-gas activities on stationary systems, including containers and appliances, but not filling containers or driving a transport. Most certifications require a training course the first year and continuing education every four years, and all certifications expire May 31 each year.

The plumber and air conditioning exemption

Under 16 TAC 9.13, Texas master or journeyman plumbers and Class A or B air conditioning and refrigeration contractors can register with the RRC for an exemption from Category D licensing and exam requirements, for a $50 fee. The RRC stresses two limits: the exemption is not effective until the card is issued, and it covers only the individual who holds it. A helper without the exemption or an RRC certification cannot do LP-gas work.

Paperwork you should get

Natural Resources Code 113.401 requires a licensee who installs or repairs an LPG system, piping or connected appliance to give the owner a written warning that installation, modification or repair by someone not licensed or registered may cause injury, harm or loss. If your propane installer hands you that notice, that is a good sign. If nobody does, ask why.

Tank placement follows NFPA 58. The RRC adopted the 2017 edition by reference (effective Sept. 1, 2020) with Texas changes in 16 TAC 9.403, and 16 TAC 9.142 requires containers to meet NFPA 58 distance rules. Florida now uses a newer edition, so do not assume a Florida spacing chart applies in Texas. See propane tank installation rules.

Natural gas piping: a plumbing license under Occupations Code 1301

If your generator will run on utility natural gas, the pipe from the meter to the generator is plumbing in Texas. Occupations Code 1301.002 defines plumbing to include piping used to supply or distribute "water, other liquid or gas," and piping outside a building that connects it to a gas supply on the premises. That work is licensed by the Texas State Board of Plumbing Examiners (TSBPE).

TSBPE issues Responsible Master Plumber, Master Plumber, Journeyman Plumber, Tradesman Plumber-Limited and Plumbing Inspector licenses, plus endorsements for medical gas piping, water supply protection and residential fire sprinklers. There is no separate "natural gas endorsement" on TSBPE's list, so the question to ask is simply which plumbing license the person running your gas line holds and which company's responsible master plumber is behind the job.

We checked the TSBPE home page on Nov. 19, 2026 for any notice of a 2025 transfer or merger of the board. It showed none: TSBPE still licenses plumbers and runs its own public license search. If that changes, the license search link below will move with it.

The gas utility handles the meter itself. Many generators need a larger meter or higher-pressure service, which only the utility can change. See natural gas meter upgrades.

Can a Texas homeowner install their own generator?

Possibly, for some parts, and only where local rules allow. Occupations Code 1305.003(a)(6) exempts electrical "work not specifically regulated by a municipal ordinance that is performed in or on a dwelling by a person who owns and resides in the dwelling." Two conditions do the heavy lifting:

  • You must own and live in the home. A landlord wiring a rental, or a friend helping for cash, is not covered.
  • The work must not be specifically regulated by a municipal ordinance. Large Texas cities adopt electrical codes and permit rules. After SB 1252, cities may not regulate installation or inspection of residential energy backup systems through NEC amendments or ordinances, and how that interacts with this homeowner exemption is not settled. Ask your city building department and TDLR before relying on it.

Propane is a different story. Natural Resources Code 113.081 requires a license for installing LP-gas containers, systems and piping, and it has no homeowner exemption like the electrical one. The only consumer carve-out in that section is for transporting or storing LP-gas for personal consumption. Plan on a licensed propane company for the tank and gas connection.

There are also practical reasons to hire out the work. Generator makers often tie warranty terms to installation by a qualified installer, insurers may ask for permit records after a fire, and an HOA may require licensed contractors under Property Code 202.019 (it can require electrical, plumbing and fuel line connections to be made only by licensed contractors). A standby generator connects to your service and can back-feed the utility line if the transfer switch is wrong. This is not a beginner project.

Do generator service technicians need a license?

It depends on what they touch. Routine engine maintenance, such as changing oil, filters and spark plugs, is mechanical work, and Texas has no general state license for small engine or generator mechanics. Electrical work is different.

Occupations Code 1305.003(a)(7) exempts maintenance and servicing of electrical equipment "within the equipment's enclosure" when done by an authorized employee or authorized representative of the equipment manufacturer, limited to the manufacturer's products. That covers some factory service work inside the generator housing. It does not, on its face, cover wiring outside the enclosure, like replacing a transfer switch, adding circuits or modifying the panel. That work needs a licensed electrical contractor.

Whether a particular independent dealer counts as a manufacturer's "authorized representative" for this exemption is a question for TDLR, not something we can confirm. A safe rule for owners: anything involving the transfer switch, the service panel or new wiring should be done by a company with a TDLR electrical contractor license. Anything involving propane lines or regulators needs an RRC licensee. See generator maintenance.

How to verify a Texas installer's licenses, step by step

TDLR electrical license

  1. Ask for the electrical contractor license number (the business) and the name of the master electrician.
  2. Use TDLR's license search, linked from tdlr.texas.gov under "Verify a License," and search by name or license number.
  3. Confirm the license type is Electrical Contractor and the status is active, then check the master and the electricians who will be on site.
  4. If you cannot find it online, TDLR's FAQ lists customer service at 800-803-9202 (Texas only) or 512-463-6599.

RRC LP-gas license

  1. Ask for the company's RRC LP-gas license number and category, and the names of the certified employees (or the plumber's RRC exemption card).
  2. Check the certificate dates. All RRC certifications expire May 31, so a card dated for a prior year may be stale.
  3. Contact RRC Alternative Fuels Safety through rrc.texas.gov if you need the agency to confirm a license. The RRC's licensing pages do not offer a simple public search box, so a call or email may be needed.

TSBPE plumbing license

  1. Ask for the plumber's name and license number and the responsible master plumber.
  2. Search TSBPE's public license search, linked from tsbpe.texas.gov.

What to compare

Make sure the names match the company on your contract and the permit application. A license held by a different company, or by someone who left the company, does not cover your job. Our hiring guide has a full quote checklist.

What if an unlicensed person installed my generator?

First, safety. If you see scorched wiring, smell gas, or the generator powers the house while the utility is also on, shut the generator off at its controller and call a licensed electrician or your gas or propane supplier. A propane leak or a back-feeding generator can kill.

Next, get the work inspected. Ask your city or county permit office whether a permit was ever issued. If not, a licensed contractor can usually pull a permit to inspect and correct the installation. Under LGC 247.0025, a qualified third party may also review and inspect home backup power work.

Then consider your options:

  • Penalties. Violating chapter 1305's licensing requirements, or employing unlicensed people for regulated work, is a Class C misdemeanor under 1305.303, and TDLR can impose administrative penalties under 1305.301 whether or not the person holds a license. Knowing violations of the LP-gas chapter are a Class C misdemeanor for a first offense and a Class A misdemeanor for a repeat under Natural Resources Code 113.232.
  • Warranty and insurance. Call the manufacturer about warranty status and tell your insurer if there has been damage. Unpermitted work can complicate claims.
  • Money. Getting money back from an unlicensed installer is usually a civil matter. For larger amounts, talk with a Texas attorney.

How to file a complaint in Texas

ProblemWhere to complainHow
Unlicensed or poor electrical workTDLR Enforcement (or your city first, if it has a local licensing program)Online complaint form on tdlr.texas.gov; Enforcement Division 512-539-5600
Propane tank, piping or LP-gas safetyRailroad Commission of TexasComplaints page at rrc.texas.gov/complaints
Natural gas piping by a plumberTexas State Board of Plumbing ExaminersThrough tsbpe.texas.gov
Permit or inspection issuesCity or county building departmentLocal permit office
Contract or deposit disputesPrivate attorney; Texas Attorney General consumer protectionCivil remedies; see the hiring guide on liens and trust funds

TDLR's FAQ notes that if you are in an area with a municipal or regional licensing program, you should first contact or file a complaint with that local authority. Include photos, the contract, receipts, license numbers you were given and any texts or emails. A complaint is not a lawsuit and will not get your money back by itself, but it creates a record and can stop an unlicensed operator.

City notes: Houston, Dallas, San Antonio and Austin

State licensing rules are the same everywhere in Texas. What differs by city is the permit process and, in two of these cities, the utility.

  • Houston and Dallas are served by investor-owned electric utilities, so SB 1252's limits on city regulation apply fully, and SB 1202's third-party option is available. See Houston and Dallas.
  • San Antonio and Austin are served by municipally owned electric utilities. SB 1252 does not limit a municipally owned utility's authority to regulate installation or inspection of residential backup systems in its service area, and LGC 247.0025 does not limit a municipally owned utility's interconnection and service policies. Check with the utility as well as the city. See San Antonio and Austin.

How to choose a provider

  • Ask every bidder for the TDLR electrical contractor license number and the master electrician's name.
  • For propane, ask for the RRC LP-gas license number and category and the certified workers' names, or a plumber's RRC exemption card.
  • For natural gas, ask which TSBPE-licensed plumber will run the line.
  • Verify each license online (TDLR, TSBPE) or by contacting the RRC, and match names to the contract.
  • Confirm who pulls the permit, or whether a third-party inspector under LGC 247.0025 will be used and whether that inspector is independent.
  • Expect the LP-gas installer's written warning notice required by Natural Resources Code 113.401.
  • If your HOA requires licensed contractors under Property Code 202.019, include license numbers in the application.
  • Keep license printouts, permits and inspection records with your warranty papers.
  • Report unlicensed work to TDLR, the RRC or TSBPE as appropriate.

Related standby generator installation guides

Standby generator installation by state and city

Questions people ask

What license do you need to install a generator in Texas?

The company doing the electrical work needs a TDLR electrical contractor license, and the people wiring it need individual TDLR electrician licenses, with apprentices supervised by a master. Propane tanks and LP-gas lines need a Railroad Commission LP-gas company license and certified workers, or a registered plumber or ACR exemption. Natural gas lines need a TSBPE-licensed plumber. A manufacturer's dealer authorization is not a state license.

Can a factory-authorized brand dealer install without being an electrical contractor?

A dealer can sell the generator, but under Occupations Code 1305.151 a person or business may not perform or offer to perform electrical work without a license. If the dealer does not hold a TDLR electrical contractor license, a licensed electrical contractor must do the electrical work. Ask the dealer who holds the license for your job and check that the name matches your contract and permit. Brand authorization is a manufacturer program, not a state credential.

Who can run the propane line to a generator in Texas?

A company licensed by the Railroad Commission of Texas for LP-gas systems work, using RRC-certified employees, such as a Category D installer or a Category E dealer. A Texas master or journeyman plumber, or a Class A or B air conditioning contractor, can register with the RRC for an exemption, but it only covers that individual and only once the card is issued. The installer should give you the written LPG warning notice.

Who can run a natural gas line to a generator in Texas?

A plumber licensed by the Texas State Board of Plumbing Examiners. Occupations Code 1301.002 defines plumbing to include piping that supplies gas and piping outside a building connecting it to a gas supply on the premises. The utility handles the meter itself and any meter upgrade. Ask which plumber will do the work and look up the license on TSBPE's public search.

Can a homeowner install their own generator in Texas?

Possibly the electrical part, in limited cases. Occupations Code 1305.003(a)(6) exempts work not specifically regulated by a municipal ordinance done in or on a dwelling by a person who owns and lives in it. Check with your city and TDLR first. Propane installation has no similar homeowner exemption, so the tank and LP-gas lines need an RRC licensee. Warranty, insurance and HOA rules may also require professional installation.

Did SB 1252 remove the need for a licensed electrician?

No. SB 1252 (2025) limits city ordinances and NEC amendments for residential energy backup systems up to 50 kW or 100 kWh, effective Sept. 1, 2025. TDLR said in August 2025 that all non-exempt electrical work on those systems must still be done by licensed Texas electrical contractors with licensed electricians under chapter 1305 and the NEC. Municipally owned utilities also keep authority in their service areas.

How do I verify an electrician's license with TDLR?

Go to tdlr.texas.gov, choose Verify a License, and search by person or business name or license number. Confirm the business holds an Electrical Contractor license with active status, and that the master electrician and on-site electricians hold active individual licenses. TDLR customer service is 800-803-9202 in Texas or 512-463-6599. Remember that a city license is valid only in that city.

What happens if an unlicensed person did my generator install?

Have the work inspected by a licensed contractor and ask the permit office whether a permit was issued. Unlicensed electrical work is a Class C misdemeanor under Occupations Code 1305.303, and TDLR can impose administrative penalties. Unlicensed LP-gas work violates Natural Resources Code chapter 113. File complaints with TDLR or the RRC, check your warranty and insurance, and talk with an attorney about recovering money.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration