New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · AC and heating

Is My Gas Furnace Safe? Carbon Monoxide, Cracked Heat Exchangers and First-Freeze Startup in Texas and Florida

What carbon monoxide does, how a furnace can leak it, what to do when an alarm sounds, what Texas and Florida law actually require, and how to tell a real cracked heat exchanger from a sales pitch.

A cracked heat exchanger can be dangerous because it may let combustion gases, including carbon monoxide (CO), mix with the air your blower sends through the house. CO has no smell, so a working CO alarm is your real warning. If an alarm sounds or anyone has headache, dizziness, nausea or confusion, get everyone outside and call 911. Never accept a 'cracked heat exchanger' verdict without seeing proof, a CO reading and, if unsure, a second licensed opinion.

Key facts

  • CDC says more than 400 Americans die each year from unintentional CO poisoning not linked to fires, more than 100,000 visit an emergency department and more than 14,000 are hospitalized. CPSC counts more than 200 deaths a year tied to consumer products; the two agencies count differently.
  • CDC lists gas- and oil-burning furnaces among household CO sources and says to have your heating system serviced every year.
  • CPSC advises battery-operated or battery-backup CO alarms on every level of the home and outside sleeping areas, meeting the current UL 2034 standard, and says interconnected alarms are best.
  • Florida Statutes 553.885 requires a CO alarm within 10 feet of each sleeping room in new buildings and additions built on or after July 1, 2008 that contain a fuel-burning appliance, fireplace or attached garage.
  • Texas Property Code Chapter 92, Subchapter F requires landlords to install smoke alarms, including one in each bedroom (92.255), but the chapter contains no statewide carbon monoxide alarm requirement.
  • After the February 2021 winter storm, Texas DSHS confirmed 246 storm-related deaths; 19 (7.7%) were CO poisonings from generators, grills, heaters, vehicles in enclosed spaces and ice blocking the vents of gas heating equipment.
  • In 2020, 61% of Texas homes and 33% of Florida homes used a furnace as their main heating equipment, per EIA's Residential Energy Consumption Survey.
  • The Florida Mechanical Code (2023, Section 303.3) bars most fuel-fired appliances from being located in, or taking combustion air from, bedrooms, bathrooms, toilet rooms and storage closets, unless they are direct-vent.

Why carbon monoxide is the main furnace risk

Carbon monoxide (CO) is a gas made when fuel burns without enough oxygen. You cannot see it, smell it or taste it. A gas furnace makes some CO every time it burns, and a healthy furnace sends those combustion gases up a vent pipe (the flue) and outdoors. Trouble starts when that path breaks: a blocked vent, a disconnected pipe, a burner that burns dirty, or a crack in the metal that separates the flame from your house air.

The numbers are serious. CDC reports more than 400 deaths a year from unintentional, non-fire CO poisoning in the U.S., more than 100,000 emergency room visits and more than 14,000 hospital stays. CPSC reports a lower figure, more than 200 deaths a year, because it counts only deaths tied to consumer products. Either way, CO kills more people than most homeowners expect, and many cases happen in winter when heaters and generators run.

Texas and Florida homes are not exempt just because winters are short. EIA's 2020 housing survey found that 61% of Texas homes and 33% of Florida homes use a furnace as their main heating equipment. Not all of those furnaces burn gas, because EIA's furnace count also includes electric furnaces, but North Texas, the Hill Country and North Florida have many gas furnaces that sit unused for most of the year and then run hard during a sudden freeze. That pattern, months of rest followed by heavy use, is exactly when vent problems, rust and nests show up.

What are the symptoms of carbon monoxide poisoning?

CDC lists the most common symptoms as headache, dizziness, weakness, upset stomach, vomiting, chest pain and confusion. People often describe them as flu-like. CPSC adds a useful clue: CO symptoms look like the flu but without a fever. At high levels, CO causes confusion, loss of muscle coordination, fainting and death. CDC warns that people who are asleep or intoxicated can die before they ever notice symptoms.

Clues that point to CO instead of a cold

  • Several people in the house feel sick at the same time, and pets seem sluggish.
  • You feel better when you leave the house and worse when you come back.
  • Symptoms start or get worse when the heater runs, often on the first cold night of the year.
  • Headaches are worse in the morning after the furnace ran all night.

Who is at highest risk

CDC says everyone is at risk, but infants, older adults, and people with heart disease, anemia or breathing problems are more likely to get seriously ill. That matters for caregivers: an older parent living alone in Dallas or Jacksonville may not connect a headache to the furnace. A plug-in or battery CO alarm near their bedroom is cheap insurance.

What to do if your CO alarm goes off

CPSC's guidance is blunt: never ignore a sounding CO alarm. Follow these steps in order.

  1. Get everyone outside into fresh air right away. Do not stop to search for the source or open every window first.
  2. Call 911 or your fire department from outside. Fire crews in Houston, San Antonio, Miami-Dade and most other departments carry meters that measure CO in the air.
  3. Count heads. Make sure every person and pet is out.
  4. Do not go back in until emergency responders say it is safe. CPSC says not to reenter until responders give permission.
  5. Do not run the suspected appliance again until a trained, licensed technician has checked and repaired it.
  6. Get medical care for anyone with symptoms, even if they feel better outside. Tell the doctor you suspect CO.

If your gas utility also smells gas (a rotten egg odor added to natural gas), leave and call the utility's emergency line from outside. Gas leaks and CO are different problems, but both mean you get out first and ask questions later.

What about a chirping alarm?

A short chirp every minute or so usually means a low battery or an alarm at the end of its life, not CO. Check the label. CDC says to replace CO detectors according to the manufacturer's instructions or every 5 years. If the alarm shows a number or sounds a pattern you do not recognize, treat it as a real alarm until you know otherwise.

Where should CO alarms go?

CPSC recommends battery-operated or battery-backup CO alarms on every level of the home and outside sleeping areas. CDC says to put them near every sleeping area. Interconnected alarms are best, because when one sounds, they all sound.

LocationRecommendationSource
Outside each sleeping area (hallway by bedrooms)Yes, at least oneCPSC, CDC
Every level of the homeYesCPSC
Within 10 feet of each bedroom (Florida new homes and additions since July 1, 2008 with fuel appliances or attached garage)Required by lawFla. Stat. 553.885
Kitchen, or directly above a fuel-burning applianceNot recommendedCPSC
Next to a heating vent, or behind curtains or furnitureAvoidCPSC

Buy an alarm that meets the current UL 2034 standard, which CPSC names. Combination smoke and CO alarms are fine. Florida's statute expressly allows hard-wired, battery-powered or combination smoke and CO alarms to meet its requirement.

Test alarms monthly with the test button, and change batteries on a schedule. CDC suggests checking batteries when you change the clocks in spring and fall. Write the install date on each alarm so you know when it is due for replacement.

Does Texas require CO detectors?

Texas has a detailed state law for rental smoke alarms but, in our review of the current statute, no statewide CO alarm requirement for rentals or existing homes.

  • Smoke alarms in rentals: Texas Property Code 92.255 requires a landlord to install at least one smoke alarm in each separate bedroom, one in the hallway serving multiple bedrooms, and one on each level of a multi-level unit. Units occupied before September 1, 2011 may use battery alarms that are not interconnected.
  • Testing and repair: Under 92.258, the landlord must test smoke alarms when the tenant moves in. During the lease, the landlord must inspect or repair an alarm after the tenant gives notice. Under 92.259, a landlord who does not act within seven days of a tenant's written notice can be liable.
  • CO alarms: Chapter 92 does not mention carbon monoxide. Some Texas cities adopt newer model building and property maintenance codes that can require CO alarms in new construction or rentals. Ask your city's building or code enforcement office (for example, Houston Permitting Center, Dallas Development Services or Austin Development Services) what applies to your address.

Even when no law requires one, a tenant can buy an inexpensive plug-in or battery CO alarm and put it near the bedrooms. If you rent and your unit has a gas furnace, gas water heater or attached garage, it is worth doing on day one. For repair rights when a landlord ignores a heating or safety problem, see our Texas landlord repair law guide.

Does Florida require CO detectors?

Yes, for newer buildings. Florida Statutes 553.885 applies to every new building, and every addition to an existing building, built on or after July 1, 2008 that has a fossil-fuel-burning heater or appliance, a fireplace, an attached garage or another feature that can produce CO. Those buildings must have an approved, working CO alarm within 10 feet of each room used for sleeping, or at other locations the Florida Building Code requires. The statute defines fossil fuel broadly: coal, kerosene, oil, fuel gases and other petroleum or hydrocarbon products.

Key limits to understand:

  • The rule covers new construction and additions. A plain repair or alteration to an older home generally does not trigger it unless it counts as an addition (more floor area, stories or height).
  • Hospitals, inpatient hospice facilities and AHCA-licensed nursing homes have their own stricter rule: a detector in or directly outside each room with a fuel-burning appliance, tied into the fire alarm system.
  • An all-electric home with no attached garage and no fireplace may fall outside the rule, but a portable generator used after a hurricane still creates CO risk.

Florida also controls where gas appliances can sit. The 2023 Florida Mechanical Code, Section 303.3, says fuel-fired appliances may not be located in, or take combustion air from, sleeping rooms, bathrooms, toilet rooms or storage closets, unless they are direct-vent units that pull all combustion air from outdoors or sit in a sealed, outdoor-air enclosure. If you find a gas furnace or water heater inside a bedroom closet in an older Tampa or Orlando house, ask a licensed contractor and the local building department whether it meets code.

Florida rental law does not add a separate CO duty for landlords that we could confirm. Florida also preempts local landlord-tenant ordinances under Fla. Stat. 83.425. See our Florida landlord repair law guide.

What is a heat exchanger, and is a crack really dangerous?

A gas furnace burns fuel inside a set of metal chambers or tubes called the heat exchanger. The blower pushes house air across the outside of that metal, so the air warms up without touching the flame. The combustion gases stay inside the heat exchanger and leave through the flue. A high-efficiency (condensing) furnace has a second heat exchanger that pulls extra heat out of the exhaust and drains the water it makes.

Over many heating seasons, the metal expands and shrinks thousands of times. Rust from humid attics or garages, too little airflow from a clogged filter, and a furnace that is too big for the house can all stress the metal until it cracks or rusts through. ENERGY STAR's maintenance checklist lists the heat exchanger as something a technician should inspect, and notes that a cracked heat exchanger or dirty burner makes equipment operate less safely.

How dangerous is it?

A crack is a real safety defect, and most manufacturers and technicians will tell you to stop using the furnace once a breach is confirmed. But a crack does not always mean CO is pouring into the house right now. How much leaks depends on the crack's size and location, pressure inside the furnace and how the blower and burners interact. That is why proof matters, and why a CO alarm, not your nose or a guess, is your real safety net.

Warning signs worth a service call

  • Your CO alarm sounds, or people get headaches when the heat runs.
  • Burner flames look lazy, yellow or orange, or jump and flicker when the blower starts (a healthy natural gas flame is mostly blue).
  • Soot or black streaks around the burner area or the furnace cabinet.
  • Rust flakes or water inside the burner compartment.
  • The furnace keeps shutting off on a safety limit or flame rollout switch.
  • A sharp, chemical or exhaust smell that is different from the dusty first-fire smell.

Is the 'cracked heat exchanger' upsell a scam?

Sometimes it is a true diagnosis. Sometimes it is a sales tactic. Because a heat exchanger usually cannot be replaced cheaply and a crack is scary, it is one of the easiest ways to turn a $100 tune-up into a full system sale. You do not need to accuse anyone. You need evidence.

Ask for proof before you agree to anything

  1. Photos or video. Ask the technician to show you the crack with a camera scope, in a picture you can keep. A genuine crack is visible. A vague "it's probably cracked" is not a diagnosis.
  2. Combustion and air readings. Ask what CO readings they measured in the flue and in the supply air, and write the numbers down. Ask whether readings change when the blower turns on.
  3. Model and serial number. Heat exchangers often carry a long manufacturer parts warranty, sometimes longer than the rest of the furnace. Ask whether the part is under warranty and whether the labor alone would be cheaper than a new system. Our warranty guide explains how to check.
  4. A written report. Ask for the finding in writing on the company's letterhead with the technician's name and license number.
  5. A second opinion. Call a different licensed company and do not tell them what the first one said. If both find the same crack, you can trust it.

Keep yourself safe while you decide

If a technician red-tags the furnace (marks it unsafe and shuts off gas to it), do not turn it back on yourself. Use safe backup heat, such as a heat pump if you have one, or a listed electric space heater plugged directly into a wall outlet and kept away from bedding and curtains. Never heat a house with a gas oven, which CDC specifically warns against. Getting a second opinion usually takes a day or two, and that short delay is much better than spending thousands on the wrong fix.

Check the license and file a complaint if needed

  • Texas: HVAC contractors must hold a TDLR air conditioning and refrigeration contractor license. Look them up at the TDLR license search and file complaints through TDLR's online complaint portal. See Texas HVAC licensing.
  • Florida: Verify the contractor at DBPR's license search and file complaints online with DBPR, Customer Contact Center (850) 487-1395. See Florida HVAC licensing.

For other pressure tactics to watch for, read our HVAC scams and red flags guide.

Why does my heater smell like burning the first time I turn it on?

The first time you run the heat each fall, dust that settled on the heat exchanger and the electric heat strips over the summer burns off. That creates a dry, dusty, slightly burnt smell for a short time. It is normal and should fade within the first hour or so of running. Opening a window and replacing the air filter helps.

Smells that are not normal:

SmellWhat it can meanWhat to do
Dusty, burnt dust, fades in under an hourNormal first-fire burn-offChange the filter, ventilate
Rotten eggs or sulfurNatural gas or propane leakLeave the house, call the gas utility from outside
Hot plastic or electrical burning that keeps goingOverheating motor, wiring or a foreign object on heat stripsTurn the system off at the thermostat and breaker; call a technician
Sharp exhaust or fumes, burning eyesVenting problem, possible COGet outside, call 911 if an alarm sounds or anyone feels sick
Musty or mildewMoisture in ducts or the drain panSchedule service; see our humidity and mold guide

Remember that CO itself has no smell. A smell can point to a problem that also creates CO, but a missing smell never means you are safe.

First-freeze startup: a safe checklist for Texas and Florida furnaces

The biggest danger is the first cold night of the year, when everyone in Dallas-Fort Worth or Tallahassee turns on a furnace that has not run since March. ENERGY STAR recommends having a contractor check the heating system each fall, before the busy season. CDC and CPSC both recommend annual heating system service.

What a fall furnace check should include

ENERGY STAR's checklist for gas and oil systems includes checking gas connections, gas pressure, burner combustion and the heat exchanger. A thorough visit should also cover:

  • Inspecting the vent pipe and its joints from the furnace to the roof or wall, looking for gaps, rust, sagging and nests.
  • Cleaning or checking the flame sensor and ignitor.
  • Testing safety switches (limit, rollout, pressure switch).
  • Measuring CO in the flue and the air around the furnace.
  • Checking the condensate drain on high-efficiency furnaces.
  • Checking airflow and the filter.

What you can do yourself

  • Put in a fresh filter.
  • Look at the outside vent caps. In Texas freezes, ice and snow can block side-wall vents on high-efficiency furnaces and water heaters. Texas DSHS found that some of the 19 fatal CO poisonings after the February 2021 winter storm involved ice blocking vents of gas heating equipment.
  • Clear boxes, paint cans and laundry away from the furnace and water heater.
  • Test every CO and smoke alarm.
  • Look at the burner flame through the sight glass if your furnace has one. Mostly blue is good.

Never do these during a freeze or outage

CDC warns never to heat a home with a gas oven, never to burn charcoal indoors and never to run a portable gas camp stove or flameless chemical heater indoors. Run generators only outdoors, more than 20 feet from windows, doors and vents, and never in a garage, even with the door open. Never run a car in an attached garage. These are the same mistakes Texas DSHS tied to CO deaths in the 2021 storm, which also included generators, grills, heaters and vehicles run in enclosed spaces. For generator setup, see our generator and outage guide.

Why does my pilot light keep going out, or why won't the furnace light?

Most furnaces made in the last few decades do not have a standing pilot. They use an electronic ignitor (a hot surface glow element or a spark) and a flame sensor. Older furnaces and many gas wall heaters in older Texas and North Florida homes still have a standing pilot with a thermocouple, a small metal rod that tells the gas valve a flame is present.

Common reasons

  • Dirty or weak thermocouple or flame sensor. If the sensor cannot prove the flame, the gas valve shuts off for safety. This is the single most common cause of a furnace that lights, runs a few seconds, then shuts off.
  • Drafts. A pilot in a garage or attic can blow out in strong wind.
  • Dirty pilot orifice. A weak, yellow pilot flame may not heat the thermocouple enough.
  • Venting or pressure switch problems on newer furnaces, which stop ignition if the exhaust path is not clear.
  • Gas supply issues, such as a closed valve or a utility problem.

Relighting a standing pilot by following the instructions on the furnace label is a normal homeowner task. If it will not stay lit after one or two tries, stop and call a technician. Repeatedly forcing a furnace to light can hide a safety problem, such as a venting failure, that the controls are trying to warn you about. For a full heating troubleshooting guide, including heat pumps, see heater not working.

Furnace replacement, efficiency rules and costs

If the heat exchanger is confirmed cracked and out of warranty, replacement is often the practical choice. A few rules affect what you can buy.

  • Under federal standards (10 CFR 430.32), non-weatherized gas furnaces made from November 19, 2015 until December 18, 2028 must be at least 80% AFUE (annual fuel utilization efficiency), and weatherized furnaces at least 81%.
  • The current regulation says non-weatherized gas furnaces made on or after December 18, 2028 must reach 95% AFUE. That date may change: in February 2026, gas industry groups petitioned DOE to change the compliance dates, and DOE asked for public comment in April 2026. Check the latest before you plan around it.
  • The federal 25C home improvement tax credit, which used to cover efficient furnaces, ended for equipment placed in service after December 31, 2025. There is no federal 25C credit for a 2026 install. See our 25C guide.

For a price reference, Trane's 2026 cost guide, a manufacturer estimate rather than an independent study, puts an installed 80% AFUE gas furnace at $5,093 to $6,386 and a 96% AFUE furnace at $6,630 to $8,390 depending on tier. Local prices in Texas and Florida vary. Get at least two written quotes; our quote comparison guide shows what to look for. Trane also says properly installed and maintained furnaces are expected to last about 15 to 20 years.

Many South Texas and Florida homes are better served by a heat pump than a new gas furnace, since heating loads are small. Our heat pump vs gas furnace guide compares them.

Rentals, landlords and tenants: who handles a furnace safety problem?

If you rent and suspect CO or a cracked heat exchanger, your safety comes first: get out, call 911 if needed, and do not run the furnace. Then put the problem in writing to your landlord right away and keep a copy.

  • Texas: Under Property Code Chapter 92, a landlord must make a diligent effort to repair a condition that materially affects the physical health or safety of an ordinary tenant after proper notice. A furnace that leaks CO clearly fits. The rules on notice, timing and remedies are specific, so read our Texas landlord guide or call a local tenant council or legal aid office before withholding rent.
  • Florida: Under Fla. Stat. 83.51, every landlord must comply with applicable building, housing and health codes, and landlords of units other than single-family homes and duplexes must make reasonable provision for functioning heat in winter unless otherwise agreed in writing. Our Florida landlord guide walks through the written notice process. Do not withhold rent without understanding those steps.

Landlords: an annual furnace inspection by a licensed contractor, with a written report kept on file, protects tenants and gives you a record if anything goes wrong. This is general information, not legal advice. For your specific situation, talk to a licensed attorney or legal aid.

How to choose a provider

  • Install UL 2034 CO alarms outside every sleeping area and on every level; interconnect them if you can.
  • Test CO and smoke alarms monthly and replace CO alarms per the label or every 5 years.
  • Schedule a licensed furnace check each fall, before the first freeze.
  • Change the furnace filter before the first heating cycle.
  • Check outside vent caps for nests, debris and ice, especially during Texas freezes.
  • Keep storage, paint and laundry away from the furnace and water heater.
  • If a CO alarm sounds: get everyone out, call 911, do not reenter until cleared.
  • If told the heat exchanger is cracked: get photos, CO readings, a written report and a second licensed opinion.
  • Check whether the heat exchanger is still under manufacturer warranty before replacing the furnace.
  • Never run a generator, grill or car in a garage or near open windows; keep generators more than 20 feet from the house.
  • Verify the contractor's license with TDLR (Texas) or DBPR (Florida) before you sign.

Related ac and heating guides

AC and heating by state and city

Questions people ask

How do I know if my furnace is leaking carbon monoxide?

You usually cannot tell by smell or sight, because CO is invisible and odorless. The reliable way is a working CO alarm near the bedrooms and on every level. Warning clues include flu-like symptoms without a fever that ease when you leave the house, several family members feeling sick at once, soot around the furnace, and a yellow, wavering burner flame. A licensed technician can measure CO in the flue and the room air with a meter during a service call.

Is a cracked heat exchanger dangerous?

It is a real safety defect because it can let combustion gases, including CO, reach the air your blower circulates. How much actually leaks varies with the crack's size and location, which is why technicians usually shut down a furnace once a crack is confirmed. Ask for photo or video proof and CO readings, check whether the part is under warranty, and get a second opinion from another licensed company before paying for a full replacement.

Should I get a furnace inspection before winter?

Yes. ENERGY STAR recommends having a contractor check the heating system each fall, and CDC and CPSC both recommend yearly heating system service. In Texas and Florida, furnaces often sit unused for eight or nine months, then run hard during a sudden freeze. A fall check catches blocked vents, dirty flame sensors, failing ignitors and rust before the first cold night, when every company is booked.

Does Texas require carbon monoxide detectors in rentals?

Not under the statewide Texas Property Code, based on our review. Chapter 92 requires smoke alarms in each bedroom, the hallway outside bedrooms and on each level, and gives tenants remedies if a landlord does not repair them after written notice. It does not mention carbon monoxide. Some Texas cities adopt newer codes that may require CO alarms, so check with your city's code enforcement office. A tenant can always add a plug-in or battery CO alarm.

Does Florida require carbon monoxide detectors?

Yes, in new buildings and additions built on or after July 1, 2008 that contain a fuel-burning appliance, fireplace or attached garage. Florida Statutes 553.885 requires an approved CO alarm within 10 feet of each sleeping room in those buildings. Hard-wired, battery or combination smoke and CO alarms all qualify. Older homes without a qualifying addition are generally not covered, but adding alarms is still strongly recommended by CPSC and CDC.

What do I do if my CO alarm goes off?

Get everyone, including pets, outside into fresh air immediately. Call 911 or the fire department from outside. Do not search for the source and do not go back in until responders say it is safe. Do not run the suspected appliance again until a licensed technician has inspected and fixed it. Get medical care for anyone with headache, dizziness, nausea, confusion or chest pain, and tell the doctor you suspect carbon monoxide.

Is the burning smell from my heater dangerous?

A dusty, burnt smell the first time you turn on the heat each season is normal. Dust on the heat exchanger or heat strips is burning off, and it should fade within about an hour. A rotten egg smell means a possible gas leak: leave and call the gas utility from outside. A hot plastic or electrical smell that keeps going means turn the system off at the breaker and call a technician.

Why does my pilot light keep going out?

On older furnaces and wall heaters, the most common causes are a dirty or worn thermocouple, drafts, or a dirty pilot opening that makes a weak flame. Newer furnaces with electronic ignition shut down when the flame sensor is dirty or when a pressure switch detects a venting problem. Relight once or twice by following the label. If it keeps going out, call a technician, because the shutdown may be a safety control doing its job.

Can a heat exchanger crack be fixed under warranty?

Often the heat exchanger carries a longer manufacturer parts warranty than the rest of the furnace, especially if the unit was registered after installation. Labor is usually not covered unless you bought a labor warranty. Give the technician the model and serial number and ask them to check coverage with the manufacturer. If the part is covered, replacing just the heat exchanger may cost much less than a new system, though some owners still choose replacement on older units.

Are gas furnaces common in Texas and Florida?

Furnaces are the main heating equipment in 61% of Texas homes and 33% of Florida homes, according to EIA's 2020 survey, though that count includes electric furnaces, not only gas. Heat pumps heat 19% of Texas homes and 31% of Florida homes. Gas furnaces are most common in North Texas, the Panhandle and North Florida, where winters are colder and natural gas service is widespread.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration