Local Guide · AC and heating
Heat Pump or Gas Furnace in Texas and Florida: Which Heats Better and Cheaper?
In most of Florida and South Texas, a heat pump is the cheaper and simpler way to heat. In North Texas and the Panhandle, the answer depends on gas and power prices, freeze risk and what you already have. Here is the math with 2026 prices.
In Florida and South Texas, a heat pump usually wins: it heats for less than gas or electric strips and also cools. Using 2026 EIA prices, a typical heat pump costs about $20 to $21 per million Btu of delivered heat in both states, versus about $23 (Texas) and $31 (Florida) for an 80% gas furnace. In North Texas, a high-efficiency gas furnace or dual-fuel system can match or beat it in hard freezes.
Key facts
- ENERGY STAR says an air-source heat pump can deliver up to three times more heat energy than the electrical energy it uses.
- Average residential electricity price, January to August 2026: Texas 16.03 cents/kWh, Florida 15.32 cents/kWh (EIA).
- Average residential natural gas price, 2025: Texas $19.42 and Florida $25.48 per thousand cubic feet (EIA).
- One kWh equals 3,412 Btu and one cubic foot of natural gas about 1,036 Btu (EIA).
- The minimum for non-weatherized gas furnaces is 80% AFUE; furnaces made from Dec. 18, 2028 must reach 95% under current rules, a date gas groups petitioned DOE to change in 2026.
- ENERGY STAR cold-climate heat pumps must have a COP of at least 1.75 at 5°F and keep at least 70% of their 47°F heating capacity at 5°F.
- In 2020, furnaces were the main heating equipment in 61% of Texas homes and central heat pumps in 19%; in Florida, 33% and 31% (EIA RECS; furnaces include electric furnaces).
- Electric resistance heat may not be the primary heating system on complete central equipment replacements in Florida Climate Zone 2 (FBC-Energy R501.7.2).
- Houston fell to 13°F and College Station to 5°F on Feb. 16, 2021, with widespread multiday power outages (NWS).
- CDC says more than 400 Americans die each year from unintentional non-fire carbon monoxide poisoning and lists gas furnaces among household sources.
The short answer by region
| Where you live | Usually the better fit | Why |
|---|---|---|
| South Florida (Miami, Fort Lauderdale, West Palm Beach) | Heat pump | Heating is rare; Miami has dropped to 32°F only 6 times since 1948, and not since 1989 (NOAA) |
| Central Florida (Orlando, Tampa) | Heat pump | Mild winters, high gas prices; Florida code limits strip heat as primary heat on full replacements in Zone 2 |
| North Florida and Panhandle (Jacksonville, Tallahassee) | Heat pump, or dual fuel if gas is already in the home | Real freezes happen; Florida's record low is -2°F in Tallahassee (1899) |
| Houston, Gulf Coast, Rio Grande Valley | Heat pump | Long cooling season, short heating season |
| San Antonio, Austin | Heat pump or dual fuel | Mild most winters, occasional hard freezes |
| Dallas-Fort Worth, North Texas | Dual fuel, high-efficiency gas furnace, or cold-climate heat pump | More heating hours and harder freezes; many homes already have gas |
| Texas Panhandle | Gas furnace or dual fuel; cold-climate heat pump if all-electric | Coldest part of either state; Texas's record low is -23°F (Seminole, 1933) |
The rest of this guide shows the math so you can check it with your own rates.
How each system works
Heat pump
A heat pump is an air conditioner that can run in reverse. In summer it moves heat from inside to outside. In winter it pulls heat from the outdoor air, even cold air, and moves it inside. Because it moves heat instead of making it, ENERGY STAR says an air-source heat pump can deliver up to three times more heat energy than the electricity it uses. It also has no combustion, so no carbon monoxide from the heat pump itself.
Gas furnace
A furnace burns natural gas or propane and blows air across a heat exchanger. Its efficiency is AFUE, the share of fuel energy that becomes heat in your home over a season. The federal minimum for non-weatherized gas furnaces is 80%, and condensing furnaces reach the mid-90s. A furnace pairs with a separate AC (outdoor condenser plus a coil on the furnace) for cooling.
Electric furnace or air handler with heat strips
Many Texas and Florida homes have an AC with electric heat strips in the air handler. Strips are electric resistance heaters: every kWh becomes 3,412 Btu of heat, no more. That is a coefficient of performance (COP) of 1, the most expensive way to heat in both states.
What homes use today
In 2020, furnaces were the main heating equipment in 61% of Texas homes and central heat pumps in 19%. In Florida, furnaces were 33% and heat pumps 31% (EIA Residential Energy Consumption Survey). EIA's "furnace" category includes electric furnaces, so in Florida many of those are electric air handlers with strips, not gas.
Is it cheaper to heat with gas or a heat pump? The 2026 math
To compare fairly, convert everything to the cost of one million Btu (MMBtu) of heat actually delivered to your home. We used EIA's latest state averages: residential electricity for January to August 2026 and residential natural gas for 2025, plus EIA's conversions (1 kWh = 3,412 Btu; 1 cubic foot of gas = about 1,036 Btu).
| Heating option | Efficiency assumed | Texas: cost per MMBtu delivered | Florida: cost per MMBtu delivered |
|---|---|---|---|
| Electric heat strips | COP 1.0 | about $46.98 | about $44.90 |
| Gas furnace, minimum efficiency | 80% AFUE | about $23.43 | about $30.74 |
| Heat pump in very cold weather (ENERGY STAR cold-climate minimum at 5°F) | COP 1.75 | about $26.85 | about $25.66 |
| Heat pump, federal minimum seasonal (7.5 HSPF2) | about COP 2.2 | about $21.35 | about $20.41 |
| Condensing gas furnace | 95% AFUE | about $19.73 | about $25.89 |
| Heat pump in mild weather | COP 3.0 | about $15.66 | about $14.97 |
Prices: electricity 16.03 cents/kWh (TX) and 15.32 cents/kWh (FL); natural gas $19.42 (TX) and $25.48 (FL) per thousand cubic feet. The heat pump COP from HSPF2 is HSPF2 divided by 3.412. Your own rates, including fixed monthly charges and fees, can differ a lot from state averages.
What the table says
- Florida: a heat pump beats gas at almost every outdoor temperature Florida sees, because Florida gas is expensive. Strips cost about twice what a heat pump does.
- Texas: a minimum-efficiency heat pump (about $21) and an 80% gas furnace (about $23) are close. A 95% furnace (about $20) is slightly cheaper than a minimum heat pump on average and clearly cheaper on the coldest days. A higher-HSPF2 heat pump tips it back.
- Everyone: running on strips is the costly case. Keeping strips from coming on unnecessarily is the single biggest heating-bill lever for many Texas and Florida homes.
Fixed charges matter for gas
Gas utilities usually charge a fixed monthly customer charge whether or not you use much gas. In a mild climate with few heating days, that fixed cost can outweigh the per-therm savings. Check your gas bill for the fixed charge before assuming gas is cheaper.
What would a year of heating cost? Worked examples
Your annual heating need depends on your home's size, insulation, air leakage and local winter. We could not find an official, current figure for typical annual heating loads by Texas or Florida city, so the examples below use assumed loads to show the method. Replace them with your own: your utility's winter usage history is the best starting point.
| System | North Texas example (30 MMBtu/yr, assumed) | Central Texas example (15 MMBtu/yr, assumed) | Central Florida example (8 MMBtu/yr, assumed) |
|---|---|---|---|
| Electric heat strips only | about $1,409 | about $705 | about $359 |
| 80% gas furnace | about $703 | about $351 | about $246 |
| Heat pump, about 7.5 HSPF2 seasonal | about $640 | about $320 | about $163 |
| 95% gas furnace | about $592 | about $296 | about $207 |
Costs use the per-MMBtu figures above (2026 EIA electricity, 2025 EIA gas) and exclude fixed monthly gas or electric charges. The Florida gas column uses Florida gas prices, which is why the furnace looks worse there.
How to read this
- The spread is small in mild climates. In the Central Florida example, the difference between a heat pump and a 95% furnace is about $40 a year on energy. A gas customer charge alone can exceed that.
- The spread grows with the heating load. In the North Texas example, a 95% furnace saves about $50 a year over a minimum heat pump, while strips cost hundreds more than either.
- Cooling is usually the bigger bill. Florida and Texas logged the most cooling degree days of any lower-48 states in 2024 and 2025 (NOAA), so in most of Florida and South Texas the cooling efficiency (SEER2) affects your total bill more than the heating choice.
Comfort, humidity and indoor air: the non-cost differences
- Air temperature at the vents. Gas furnaces deliver hotter air in shorter bursts. Heat pumps deliver milder air for longer. Some people prefer the furnace's warm blast; others prefer the heat pump's steadier temperature, especially with two-stage or variable-speed equipment.
- Humidity in winter. Neither system adds moisture. In Florida, winter humidity is rarely a problem. In drier North Texas cold snaps, a humidifier may help comfort with either system.
- Combustion safety. A heat pump has no flame and no flue. ENERGY STAR notes heat pumps have no direct emissions such as carbon monoxide or nitrogen oxides. A furnace needs a sound heat exchanger, proper venting and CO alarms.
- One system or two. A heat pump is one outdoor unit doing both jobs, so it runs year-round and may wear faster than a furnace that runs a few weeks a year. A furnace plus AC splits the work across two machines.
- Noise. Outdoor units make noise in both seasons with a heat pump. Trane lists noise levels for its heat pumps from about 51 to 75 decibels depending on model and tier.
What is the balance point, and why does a heat pump lose ground in a freeze?
As outdoor air gets colder, two things happen to a heat pump:
- Your house loses heat faster, so it needs more.
- The heat pump can extract less heat and works less efficiently.
The balance point is the outdoor temperature where the heat pump's output just equals your home's heat loss. Above it, the heat pump alone keeps up. Below it, backup heat (strips or a furnace) has to fill the gap. A well-insulated home with a properly selected heat pump has a lower balance point.
Standard heat pumps keep working below freezing, but with falling capacity and efficiency. Cold-climate models hold up much better. To earn ENERGY STAR's Cold Climate designation, a heat pump must have a COP of at least 1.75 at 5°F and deliver at least 70% of its 47°F heating capacity at 5°F. ENERGY STAR notes these units keep working below 5°F, though pairing with backup heat is most efficient in extreme cold.
Do heat pumps work below 20 degrees?
Yes. Even standard models still deliver heat at 20°F, just less of it, and backup heat covers the rest. In South Florida and the Gulf Coast, sub-20 temperatures are rare. In North Texas and the Panhandle, they happen most winters, which is where cold-climate models and dual fuel earn their keep.
What is auxiliary heat vs emergency heat? Are heat strips expensive to run?
- Auxiliary (aux) heat turns on automatically when the heat pump cannot keep up, during defrost, or when you raise the thermostat several degrees at once. On many thermostats it shows as "AUX."
- Emergency heat (EM HEAT) is a setting you choose. It shuts off the heat pump and runs only the backup heat. Use it only if the outdoor unit is broken or iced and not defrosting, then call for service.
Yes, strips are expensive. At Texas and Florida average 2026 power prices, strip heat costs about $45 to $47 per MMBtu delivered, roughly double a heat pump at its federal-minimum seasonal efficiency. A 10 kW strip heater uses 10 kWh every hour it runs, which is about $1.60 an hour at 16 cents per kWh.
How to keep strips off
- Do not make big thermostat jumps. ENERGY STAR advises heat pump owners not to set back the thermostat when away, because the recovery can trigger backup heat.
- ENERGY STAR also advises avoiding "Auto" mode on heat pumps, which can switch between heating and cooling inefficiently.
- Ask your technician whether your thermostat has an outdoor lockout for strips, so they only run below a set temperature.
- Keep filters clean. ENERGY STAR advises cleaning filters when visibly dirty.
Florida code limits on strip heat
In Florida Climate Zone 2 (every county except Miami-Dade, Monroe, Broward, Palm Beach, Collier, Lee and Hendry), electric resistance cannot be the primary heating system under the prescriptive path for new homes (FBC-Energy R403.7.2) or on complete central equipment replacements (R501.7.2). Electric resistance furnaces must be sized within 4 kW of the calculated design load (R403.7.1.2.2).
Why does my heat pump blow cool air in winter?
A few normal reasons, and a few that need service:
- Normal: warm, not hot. A heat pump delivers a large volume of moderately warm air rather than the very hot blast of a gas furnace. Air that is cooler than your skin can feel cool on your hand even while it warms the house.
- Normal: defrost. In cold, humid weather, frost builds on the outdoor coil. The unit briefly switches to cooling mode to melt it, often with steam rising outside. Backup heat may run during defrost to temper the air. This usually lasts a few minutes.
- Problem: the outdoor unit is iced solid and not clearing. The defrost control or sensor may have failed.
- Problem: the thermostat is in Cool or Auto, or wired wrong after a thermostat change.
- Problem: a stuck reversing valve, which can leave the system cooling only.
- Problem: low refrigerant from a leak, which cuts heating output.
See our winter heating repair guide.
What happened to heat pumps and furnaces in Winter Storm Uri?
The February 2021 storm (called Winter Storm Uri) showed that both systems share one weakness: electricity. The National Weather Service office for Houston/Galveston reports that the arctic front arrived February 14, Houston fell to 13°F and College Station to 5°F on February 16, and the combination of ice and extreme cold caused widespread power outages lasting several days, along with loss of heat and broken pipes. NWS called it possibly the costliest weather disaster in Texas history.
Lessons for choosing a system:
- A gas furnace still needs power. Its blower, igniter and controls run on electricity. Without power, most furnaces do not run. A furnace's electrical load is much smaller than a heat pump running heat strips, so it is generally easier to back up; have a licensed electrician set up any generator connection with a proper transfer switch.
- A heat pump at 5°F delivers reduced capacity and leans on strips, which demand large amounts of power at exactly the moment the grid is stressed.
- Dual fuel lets a gas furnace take over in deep cold, cutting electric demand.
- Insulation and air sealing slow heat loss during any outage, whatever system you have.
If outages worry you, see our power outage and generator guide. Never run a generator, grill or gas oven indoors for heat; see the carbon monoxide section below.
What is a dual fuel system?
A dual fuel (or hybrid) system pairs a heat pump with a gas furnace. The heat pump handles cooling and most heating. When it gets cold enough that gas is cheaper or the heat pump cannot keep up, the controls switch to the furnace.
ENERGY STAR describes it this way: if you have a relatively new furnace with an older central AC, or are adding central AC to a furnace, consider an ENERGY STAR heat pump instead of an AC, which creates a dual-fuel system "for a modest extra cost over an AC system."
When dual fuel makes sense in Texas and Florida
- You already have gas service and a furnace in good condition, often in DFW, North Texas or North Florida.
- You want lower heating costs in mild weather and a gas backup in hard freezes.
- You want to reduce electric demand during cold snaps.
Setting the switchover
The switchover point should reflect your local gas and electric rates and your heat pump's performance. With the 2026 Texas averages above, a heat pump running at a COP above about 2.0 beats an 80% furnace on cost, and below that the furnace wins; against a 95% furnace, the heat pump needs a COP of about 2.4. In Florida, with pricier gas, the break-even is about COP 1.5 against an 80% furnace and 1.7 against a 95% furnace. Your installer can set the outdoor temperature where the heat pump's COP falls below that break-even.
Do Florida homes need a furnace?
Most do not. Florida homes typically use a heat pump or an AC with electric heat strips. Gas furnaces are uncommon and gas is expensive: Florida's 2025 average residential natural gas price was $25.48 per thousand cubic feet versus $19.42 in Texas (EIA). Florida's code also pushes toward heat pumps: in Climate Zone 2, electric resistance heat cannot be the primary heat on complete central replacements, and heat pumps must be sized on the cooling load with no more than 1.15 times the design cooling capacity (FBC-Energy R403.7.1.2.1).
If you have an older Florida home with gas heat and you are replacing the whole system, a heat pump is usually the lower-cost choice to run. If your gas furnace is young and works well, a heat pump on top of it (dual fuel) can be reasonable. If you change a gas furnace in Florida, note that Florida Class A and B air-conditioning contractors may disconnect and reconnect gas appliances during changeouts but may not run gas fuel lines inside buildings (Fla. Stat. 489.105); new gas piping requires a mechanical contractor or a gas-licensed plumber. Tampa Electric rebates on gas-heat systems require a new furnace, and propane heat does not qualify.
Are heat pumps good in Texas winters?
In most of Texas, yes. Houston, San Antonio, Austin, Corpus Christi and the Rio Grande Valley have short, mild heating seasons where heat pumps run efficiently most of the time. The trouble spots are hard freezes, which are rare but serious.
North Texas and the Panhandle are different: they hold the state's coldest records, including Texas's all-time low of -23°F at Seminole in 1933 (NOAA). In DFW and northward, compare three options:
- Standard heat pump with strips: lowest upfront cost; strip use in cold snaps raises bills.
- Cold-climate heat pump: higher cost; much less strip use. Check for the ENERGY STAR Cold Climate designation (COP of at least 1.75 at 5°F).
- Dual fuel: best if you already have gas; the furnace handles the coldest days.
Many Texas utilities pay heat pump rebates. Austin Energy pays $650 to $950 by tier; CPS Energy pays per ton and requires at least 7.5 HSPF2. See our Texas rebates guide.
Should I switch from a gas furnace to a heat pump?
Consider switching when your AC and furnace are both near replacement, you are in a mild-winter area, or your gas bill has a high fixed charge for little heating use. Hold off when your furnace is young, you are in the Panhandle, or your electrical panel would need a costly upgrade.
What to check before switching
- Load calculation. A Manual J for both heating and cooling. See our sizing guide.
- Electrical capacity. Heat strips need large circuits. Your panel may need work.
- Ducts. Heat pumps deliver cooler supply air than furnaces, so leaky or undersized ducts are more noticeable in winter.
- Other gas appliances. If your water heater and range stay on gas, you keep the gas service and its fixed charge, which weakens the savings.
- Gas line work. Capping a gas line must be done by a properly licensed person. In Texas, AC contractors who install LP-gas appliances need a Railroad Commission exam exemption (TDLR FAQ).
- Rebates. Heat pump rebates are often larger than AC rebates. The federal 25C credit (up to $2,000 for heat pumps) ended for installs after December 31, 2025, per the IRS; ignore pages that still say it runs through 2032.
Upfront cost comparison
Trane's 2026 guide (installed, national, Trane equipment only) puts heat pumps at $8,313 to $15,608 by tier. For a split AC plus furnace, Trane lists ACs at $6,568 to $13,669 and furnaces at $5,093 to $6,386 (80% AFUE) or $6,630 to $8,390 (96% AFUE), priced separately. Replacing both together is normally quoted as one job, so use real local quotes. Trane also lists cold-climate heat pumps at $7,983 to $17,012 by tier.
How long does a gas furnace last vs a heat pump?
Trane says furnaces and heat pumps are expected to last 15 to 20 years when properly installed and maintained, and air conditioners about 15 years. In Texas and Florida, a heat pump works in both seasons, so it may accumulate more run time than a furnace that runs only a few weeks a year. A furnace in a mild Texas climate often outlasts the AC paired with it. That is one reason dual fuel can make sense: replace the worn AC with a heat pump and keep the younger furnace.
Annual service extends both. ENERGY STAR recommends a contractor check cooling equipment each spring and heating equipment each fall, including gas pressure, burner combustion and the heat exchanger on furnaces.
What does each system cost to maintain and repair?
Fuel bills are only part of the long-run cost. Each system also needs yearly service, and each has its own set of parts that fail.
Yearly maintenance
ENERGY STAR recommends a contractor check-up every year: the cooling side in spring and the heating side in fall, before contractors get busy. A heat pump runs in both seasons, so it gets the full cooling checklist (clean coils, check refrigerant charge, clear the condensate drain) plus a heating check. A gas furnace needs a different fall visit: ENERGY STAR says the contractor should check gas connections, gas pressure, burner combustion and the heat exchanger, because a dirty burner or cracked heat exchanger can make the furnace run less safely. With either system, ENERGY STAR advises inspecting the filter monthly. A dual fuel home has both sets of parts, so plan on both checklists.
Typical heat pump repair costs
Fixr's national heat pump repair guide, updated January 21, 2026, puts the average heat pump repair at about $400, with most jobs from $150 to $650. Its listed ranges include capacitor replacement at $100 to $400, circuit board replacement at $150 to $700, reversing valve replacement at $350 to $700, refrigerant leak repair at $200 to $1,500 and compressor replacement at $800 to $2,500. The reversing valve and defrost controls are heat pump parts a furnace does not have. Furnace problems usually involve the flame sensor, ignitor, inducer or control board instead; we did not find a dated furnace repair price list we could verify, so ask for a written quote.
Refrigerant
A heat pump is a refrigerant system; a furnace is not. Under EPA rules, new residential heat pumps and ACs use refrigerants with a GWP of 700 or less, such as R-454B (GWP 470) or R-32 (GWP 675). EPA's May 26, 2026 rule (effective July 27, 2026) lets equipment made before January 1, 2025 with R-410A be installed with no deadline, and EPA expects R-410A for recharging older systems to rise in price. If you pair a furnace with a new AC, the AC side faces the same refrigerant questions, so this factor mostly matters when you compare an all-electric heat pump with a furnace plus an existing AC you plan to keep.
Do I need a carbon monoxide detector with a gas furnace?
Yes. Carbon monoxide (CO) is an invisible, odorless gas from incomplete combustion. CDC says more than 400 Americans die each year from unintentional non-fire CO poisoning, more than 100,000 visit an emergency department and more than 14,000 are hospitalized, and it lists gas and oil furnaces among household sources. CPSC, which counts only consumer-product deaths, cites more than 200 a year.
- CPSC advises battery-operated or battery-backup CO alarms on every level of the home and outside sleeping areas; interconnected alarms are best.
- CDC advises having heating systems serviced every year.
- ENERGY STAR notes that a cracked heat exchanger or dirty burner makes equipment operate less safely.
- Know the symptoms: headache, dizziness, weakness, nausea, vomiting, sleepiness and confusion (CPSC). If your alarm sounds or you have symptoms, get everyone outside and call 911.
Heat pumps and electric strips do not produce CO, but if you have any gas appliance or an attached garage, you still need CO alarms. Texas sellers must disclose whether a home has a carbon monoxide alarm on the Seller's Disclosure Notice (Tex. Prop. Code 5.008). See our carbon monoxide safety guide.
What changes are coming for gas furnaces?
Under current federal rules, non-weatherized gas furnaces made before December 18, 2028 must reach at least 80% AFUE, and those made on or after that date at least 95% AFUE (10 CFR 430.32(e)). In practice that would phase out new non-condensing 80% furnaces.
On February 19, 2026, the American Gas Association, the American Public Gas Association and the National Propane Gas Association petitioned DOE to change the compliance dates of the consumer furnace standards rule. DOE published the petition and asked for comment on April 27, 2026. As of November 2026, the outcome is pending.
Why it matters here: 95% condensing furnaces need a condensate drain and different venting, which can add installation cost in homes built for 80% furnaces. If you are choosing between a furnace and a heat pump in North Texas, ask your contractor how the 2028 rule, or any change to it, affects the models and venting they propose.
How to choose a provider
- Find your current system type: heat pump, AC with heat strips, or AC with gas furnace.
- Pull your electric and gas rates (cents per kWh and dollars per therm or Mcf) from recent bills, including fixed monthly charges.
- Run the cost per million Btu comparison with your own rates.
- Get a Manual J that covers both heating and cooling loads.
- In North Texas or the Panhandle, ask about cold-climate heat pumps and dual fuel.
- Ask whether the thermostat can lock out heat strips above a set outdoor temperature.
- Avoid big thermostat setbacks and Auto mode on heat pumps, per ENERGY STAR.
- Check your electrical panel's capacity before switching from gas to all-electric.
- Install battery or battery-backup CO alarms on every level if you have any gas appliance.
- Schedule heating service each fall.
- Check utility heat pump rebates; do not count on the 25C credit for a 2026 install.
Related ac and heating guides
- Is a Heat Pump Worth It in Texas and Florida? A Hot-Humid Climate Buying Guide
- Why Is My Heater Not Working? Heat Pump, Heat Strip and Furnace Troubleshooting for Texas and Florida Winters
- Is My Gas Furnace Safe? Carbon Monoxide, Cracked Heat Exchangers and First-Freeze Startup in Texas and Florida
- What Are SEER2, EER2 and HSPF2? Which Efficiency Rating Matters in Texas and Florida
- What Size Generator or Battery Do You Need to Run Your AC During a Power Outage?
- What Size AC Do I Need? Manual J, Tonnage Myths and the Rule-of-Thumb Trap
- Texas AC and Heat Pump Rebates by Utility: Austin Energy, CPS Energy, Oncor, CenterPoint and More
AC and heating by state and city
Questions people ask
Is a heat pump or gas furnace better in Texas?
For most of Texas, a heat pump is the better all-around choice because it heats efficiently in mild winters and also cools. Using 2026 EIA averages, a minimum-efficiency heat pump and an 80% gas furnace cost about the same per unit of heat in Texas, while a 95% furnace is slightly cheaper. In North Texas and the Panhandle, dual fuel or a cold-climate heat pump is often the best fit.
Do Florida homes need a furnace?
Usually not. Most Florida homes heat with a heat pump or with electric strips in the air handler. Gas is expensive in Florida, averaging $25.48 per thousand cubic feet in 2025 (EIA), so a heat pump typically heats for less. Florida's code also bars electric resistance as the primary heat on full replacements in Climate Zone 2.
What is emergency heat on a heat pump?
Emergency heat is a thermostat setting that turns off the heat pump and runs only the backup heat, usually electric strips. Use it only when the outdoor unit has failed or is iced and not defrosting, then call for service. Running on strips costs roughly double what the heat pump would, based on 2026 Texas and Florida power prices.
Are heat strips expensive to run?
Yes. Heat strips are electric resistance heaters with a COP of 1. At average 2026 residential power prices (about 15 to 16 cents per kWh in Florida and Texas), strip heat costs about $45 to $47 per million Btu delivered, roughly twice a typical heat pump. A 10 kW strip uses 10 kWh per hour, about $1.60 an hour at 16 cents.
What is a cold-climate heat pump?
It is a heat pump built to keep strong heating output and efficiency in very cold weather. ENERGY STAR's Cold Climate designation requires a COP of at least 1.75 at 5°F and at least 70% of the unit's 47°F heating capacity at 5°F. These units are most useful in North Texas and the Panhandle.
What happens to a heat pump in a freeze like Winter Storm Uri?
It keeps running but delivers less heat and relies more on backup strips, which use a lot of electricity. In Uri, the bigger problem was power: NWS reports widespread multiday outages as Houston hit 13°F. Without power, both heat pumps and gas furnaces stop, because furnaces need electricity for blowers and controls.
Should I switch from gas furnace to heat pump?
It often makes sense when both your AC and furnace are near replacement and you live in a mild-winter area. Check your electrical capacity, ducts, other gas appliances and fixed gas charges first. In colder North Texas, consider keeping a young furnace and adding a heat pump for dual fuel.
How long does a gas furnace last?
Trane says furnaces and heat pumps last 15 to 20 years when properly installed and maintained. In mild Texas winters, a furnace may outlast the AC it is paired with because it runs fewer hours. Annual fall service, including a heat exchanger and combustion check, helps it last and run safely.
Sources
- ENERGY STAR, Air-Source Heat Pumps
- ENERGY STAR, Air-Source Heat Pump Key Product Criteria (cold climate)
- ENERGY STAR, Maintenance Checklist
- EIA, Electric Power Monthly Table 5.6.B (YTD Aug. 2026)
- EIA, Texas Natural Gas Prices
- EIA, Florida Natural Gas Prices
- EIA, British thermal units (Btu)
- EIA, 2020 RECS State Space Heating highlights
- eCFR, 10 CFR 430.32
- Federal Register, Notification of petition on furnace compliance dates (Apr. 27, 2026)
- NWS Houston/Galveston, Valentine's Week 2021 Winter Storm
- NOAA State Climate Extremes Committee records
- NOAA CPC, 2025 state cooling degree days
- NOAA State Climate Summaries 2025: Florida
- NOAA State Climate Summaries 2025: Texas
- Florida Building Code-Energy Conservation 2023, Chapter 4
- Florida Building Code-Energy Conservation 2023, Chapter 5
- Florida Building Code-Energy Conservation 2023, Chapter 3 (climate zones)
- Florida Statutes Chapter 489
- TDLR, ACR Frequently Asked Questions
- Trane, 2026 HVAC Replacement Cost Guide
- Austin Energy, AC and Heat Pump Rebates
- CPS Energy, HVAC Rebate Specifications
- Tampa Electric, Heating and Cooling Rebates
- IRS, Energy Efficient Home Improvement Credit
- IRS, One Big Beautiful Bill provisions
- CDC, Carbon Monoxide Poisoning Basics
- CPSC, Carbon Monoxide Information Center
- Texas Property Code Chapter 5 (Sec. 5.008)
- Fixr, Heat Pump Repair Cost (updated Jan. 21, 2026)
- EPA, Technology Transitions HFC restrictions by sector
- EPA SNAP, Substitutes in residential and light commercial AC and heat pumps
- Federal Register, May 26, 2026 Technology Transitions final rule
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


