Local Guide · Electricians
How to Start an Electrical Contracting Business in Texas or Florida
The licenses, insurance, workers' compensation, bonds, tax, contract and lien rules you need to open an electrical company in Texas or Florida, plus pricing, hiring and bidding basics.
In Texas, you need a TDLR electrical contractor license: the business must be or employ a master electrician of record, carry at least $300,000/$600,000 liability insurance, and insure or formally opt out of workers' compensation. In Florida, the business qualifies through a certified or registered electrical contractor acting as qualifying agent, must show financial responsibility, liability insurance and workers' compensation (required with one construction employee), plus local business tax receipts.
Key facts
- A Texas electrical contractor must be or employ a master electrician, who may be assigned to only one contractor unless owning more than 50% (Occ. Code 1305.159).
- TDLR requires electrical contractors to carry at least $300,000 per occurrence, $600,000 aggregate and $300,000 products/completed operations liability coverage.
- Texas contractors must replace a departing master of record within thirty business days.
- Texas contractors must letter both sides of each owned vehicle with business name and license number in 2-inch letters (Sec. 1305.166).
- In Florida, a business organization's license is issued in the qualifying agent's name; if the sole qualifier leaves, the business has 60 days to replace them (s. 489.521).
- Florida requires workers' compensation in construction with one or more employees (s. 440.02); up to three 10%-owner officers may elect exemption.
- Florida local governments may require one bond per electrical contractor of no more than $5,000 (s. 489.537(3)(d)).
- LBNL's August 2026 survey found a median single-family main panel replacement cost of $3,500.
The startup checklist in order
Starting an electrical contracting company is mostly a sequence problem. Do things in the wrong order and you end up with a business name you cannot use, an insurance certificate in the wrong name, or a license application kicked back. A workable order for both states:
- Confirm you (or a partner or employee) hold the license that can qualify a business: a Texas master electrician, or a Florida certified or registered electrical contractor who will act as qualifying agent.
- Pick your legal structure and form the entity with the state (see "Should I form an LLC?").
- Get a federal employer identification number (EIN) and open a business bank account.
- Buy general liability insurance and settle workers' compensation (Texas: insure or formally opt out; Florida: required with even one employee in construction).
- Apply for the business license: TDLR electrical contractor license in Texas, or the ECLB business qualification in Florida.
- Register locally: Houston contractor registration; Florida county and city business tax receipts and any local registration or bond.
- Set up sales tax treatment, contracts, lien and disclosure forms.
- Letter your trucks (Texas requires it), build a price book, set up software, and start marketing.
This guide is general information, not legal, tax or insurance advice. A one-hour meeting with a construction attorney and a CPA before you sign your first contract is money well spent.
What license do I need to start an electrical company in Texas?
Texas requires an electrical contractor license from the Texas Department of Licensing and Regulation (TDLR) for any business that performs or offers electrical work. TDLR states that anyone doing non-exempt electrical work must be licensed and must perform the work through a licensed electrical contractor.
Requirements (Occupations Code 1305.159 and TDLR's application page)
| Requirement | Details |
|---|---|
| Master electrician of record | The business must be, or employ, a licensed master electrician. The master may be the owner. |
| One business per master | A master may be assigned to only one electrical contractor unless the master owns more than 50% of the contracting business. |
| Replacing the master | If the master of record leaves, notify TDLR and designate a new master within thirty business days of the separation. |
| Liability insurance | At least $300,000 per occurrence (property damage and bodily injury combined), $600,000 aggregate, and $300,000 aggregate for products and completed operations, shown on TDLR's certificate of insurance form. |
| Workers' compensation | Proof of coverage, a certificate to self-insure, or a statement that you elected not to carry it under Labor Code ch. 406. Non-subscribers must file an online notice of no coverage with the Texas Department of Insurance through Employer E-File, which replaced form DWC-005. |
| Fee and term | $110 non-refundable application fee; licenses are valid one year from issuance and renew annually. Contractors are not required to complete continuing education (the master must). |
| Vehicle signs | Business name and TDLR license number on both sides of each vehicle the business owns, in letters at least 2 inches high in a contrasting color (Sec. 1305.166). |
| Background check | TDLR runs criminal history checks, including fingerprinting, on contractor applicants and renewals. |
City requirements in Texas
A state license is valid statewide, but cities still permit and inspect. Houston requires state-licensed master electricians and electrical contractors to register their Texas licenses with the city, and since April 1, 2022 a master electrician of record may not hold a city contractor registration for more than one contracting business. State law (Sec. 1305.201(f)) bars cities from charging state license holders a registration or similar fee, though building permit fees are allowed; confirm any Houston registration fee directly with the city. Dallas, San Antonio and Austin each run their own permit and inspection programs; check each before you pull your first permit. See Texas electrical permits.
What license do I need to start an electrical company in Florida?
Florida licenses the contractor, and a company works under a licensed individual called a qualifying agent. Your choices (DBPR license codes):
| License | Where you can work | Scope |
|---|---|---|
| EC: Certified electrical contractor | Statewide | All electrical work, all alarm systems and specialty categories |
| ER: Registered electrical contractor | Only the cities or counties where you hold a local competency card | All electrical work including specialties, but may not contract for alarm systems (must subcontract alarm work except raceways) |
| ES / ET: Certified or registered specialty contractor | Statewide (ES) or local (ET) | One segment such as residential electrical, maintenance of electrical fixtures, sign work, low voltage, utility line or two-way radio |
| EF / EG and registered alarm licenses | Statewide or local | Alarm system contracting (EF all types, EG all but fire) |
How a business qualifies (s. 489.521)
- Sole proprietor: the certificate is issued in your name; if you use a fictitious name, show proof you registered it.
- LLC, corporation or partnership: the application lists the entity and its officers, directors, partners or members. The license is issued in the qualifying agent's name with the business name noted. Changes to that information must be mailed to DBPR within 45 days.
- The qualifier's authority: the applicant must show the qualifying agent is legally able to act for the business in all matters connected with its electrical contracting and has authority to supervise the work.
- Financial responsibility: the business must furnish evidence of financial responsibility, credit and business reputation. Board rules base this on credit history, ability to be bonded and any bankruptcy history. DBPR publishes a list of acceptable credit reporting agencies.
- Insurance: before the first certificate is issued, the business must show public liability and property damage insurance in an amount set by ECLB rule. Check the current minimums on the DBPR application, since we did not confirm the dollar amounts for this guide.
- Workers' compensation: evidence of coverage under Chapter 440 is a condition of issuance and renewal (s. 489.510). If coverage lapses, DBPR can fine you $500 and the board can suspend or revoke.
Local requirements in Florida
- Business tax receipts: apply with each county or city tax collector in the business organization's name, showing your valid state certificate (s. 489.521(6)).
- License number on permits: every building permit application must carry your registration or certification number (s. 489.521(7)), and failing to do so is a disciplinary ground (s. 489.533(1)(q)).
- Local bond: counties and cities may require one bond per electrical contractor of no more than $5,000, conditioned only on Florida Building Code compliance, with statewide bond reciprocity (s. 489.537(3)(d)).
- Permits and plan review: local governments keep full power to require permits, fees, inspections and plan approval (s. 489.537(3)).
Florida contractor licenses expire August 31 of every even-numbered year; electrical contractors must complete 11 hours of continuing education per two-year cycle, including 1 hour each of workers' compensation, workplace safety and business practices. See Florida licensing.
Can I own an electrical business without being an electrician?
Yes, in both states, with strict conditions.
Texas
The business must employ a licensed master electrician as master of record. The master can be assigned to only your company (unless the master owns more than 50% of another contracting business). If the master leaves, you have thirty business days to designate a new one. Plan for that risk: a single-master company that loses its master has a short window before it cannot legally operate. Some owners keep a second master on staff or a written transition plan.
Florida
The business needs a qualifying agent who is an officer or supervising employee (s. 489.521(5)). Florida law makes the qualifier genuinely responsible:
- Primary qualifying agents are jointly and equally responsible for supervising all operations, all field work at all sites, and financial matters, both for the company and each job (s. 489.522(1)(a)).
- A primary qualifying agent must have approval authority for the company's checks, payments, drafts and contracts (s. 489.522(2)(c)).
- If the only qualifier leaves, the qualifier must notify the board within 30 days, and the business has 60 days to qualify someone else or it is no longer authorized to contract (s. 489.521(5)).
- "Renting" a license is a violation. Under s. 489.533(1)(k), when a certificate holder lets companies use the certificate without active participation in operations or management, that is prima facie evidence of intent to evade the law. The board can fine up to $10,000 per count, suspend or revoke (s. 489.533(2)).
- A person whose license is revoked cannot be a partner, officer, director or trustee of a contracting business for 5 years (s. 489.521(2)(a)2).
If you are buying an existing shop, confirm who the master of record or qualifier is, whether they stay after closing, and whether the license transfers. In Florida, a qualifier leaving to join a new company must apply and pass a financial review before a new certificate is issued in the new business name.
What is a qualifying agent in Florida?
A qualifying agent is the licensed person whose certificate or registration allows a business organization to contract. Florida recognizes two types (s. 489.522):
| Type | Responsible for |
|---|---|
| Primary qualifying agent | All operations, all field work at all sites, and all financial matters, jointly with any other primaries |
| Secondary qualifying agent | Only field work on jobs where his or her license pulled the permit, and any work he or she accepts; not financial matters |
A business with several qualifiers can file a joint agreement naming one sole primary qualifying agent, with the others as secondaries. When a qualifier stops qualifying a business, he or she has 60 days to transfer the license to another business, qualify as an individual, or put the license on inactive status. Changes are prospective: a new qualifier is not responsible for a predecessor's acts, but each remains responsible for what happened on his or her watch.
How much insurance does an electrical contractor need?
Legal minimums:
- Texas: general liability of $300,000 per occurrence, $600,000 aggregate and $300,000 products and completed operations aggregate (TDLR).
- Florida: public liability and property damage insurance in an amount set by ECLB rule (s. 489.521(4)); by renewing, each licensee certifies that the required coverage has been continuously maintained, and the board verifies by random sampling (s. 489.517(5)).
What customers will demand: commercial general contractors, property managers and public owners often require higher limits than the state minimums, plus being named as additional insured. Ask for a sample certificate requirement before you bid.
Other coverages to price with a commercial agent: commercial auto for your trucks, tools and equipment (inland marine), umbrella or excess liability, professional or design liability if you do design-build, and employment practices liability once you have staff. These are business decisions, not state license requirements.
Read the completed operations piece carefully. Electrical claims often surface after the job is finished, for example a fire months later traced to a connection. That is what the Texas "products and completed operations" minimum is for.
Do I need a bond to be an electrical contractor in Texas or Florida?
Texas: TDLR's electrical contractor application page lists liability insurance and workers' compensation requirements but no state license bond. Some public owners and general contractors require bid, performance and payment bonds on specific jobs.
Florida: the state does not require a license bond in Part II, but local governments may require one bond per electrical contractor of no more than $5,000, conditioned only on compliance with the Florida Building Code. That bond must be equally available to all electrical contractors, is payable to the Governor, and is honored statewide (s. 489.537(3)(d)). Your ability to be bonded is also part of the ECLB's financial responsibility review (s. 489.521(3)(a)).
For public work and larger commercial bids, start a relationship with a surety agent early. Sureties look at your financial statements, work history and credit, and bonding capacity grows with your track record.
Do I need workers' compensation? Texas non-subscriber vs Florida's rules
Texas
In Texas, most private employers can choose not to carry workers' compensation. The Texas Department of Insurance, Division of Workers' Compensation (DWC) says private employers can choose to carry it, but it is not required in most cases. Employers without coverage are called non-subscribers. DWC's employer page says non-subscribers:
- Must report to the state that they do not have coverage (through Employer E-File).
- Must report to DWC work-related injuries with more than one day of lost time, plus all work-related illnesses and deaths.
DWC also explains the trade-off: a workers' compensation policy provides lost wages and medical benefits to injured employees and, except when gross negligence results in a fatality, limits liability if an employee sues your business. Opting out means an injured worker may sue you directly. For a trade with fall, shock and burn risks, talk through this with an insurance agent and attorney. Many general contractors and commercial owners also require subcontractors to carry coverage.
TDLR's license rules accept either proof of coverage, a certificate to self-insure, or a statement that you elected out under Labor Code ch. 406 (Occ. Code 1305.159). DWC's line for employer questions is 800-252-7031, option 1.
Florida
Florida treats construction differently from other businesses:
- In most industries, coverage is required at four or more employees, but in the construction industry, coverage is required with one or more employees (s. 440.02, definition of "employment").
- Any contractor or subcontractor doing public or private construction must secure coverage for its employees (s. 440.10(1)(a)).
- A contractor is liable for the employees of uninsured subcontractors and must require subcontractors to show proof of coverage (s. 440.10(1)(b)-(c)).
- Owners can sometimes exempt themselves: no more than three officers of a construction corporation (or affiliated group) may elect exemption, and each must own at least 10% of the stock and be listed as an officer with the Division of Corporations. LLC members owning at least 10% count as officers. The exemption fee is $50, the officer must personally sign and complete an online coverage and compliance tutorial, and an exempt officer cannot collect benefits.
- DBPR requires proof of coverage to issue or renew your electrical license (s. 489.510).
Florida's Division of Workers' Compensation handles exemptions at (850) 413-1609. Florida also requires 1 hour of workers' compensation continuing education each renewal cycle for electrical contractors.
Should I form an LLC for my electrical business?
Most new electrical contractors form a limited liability company (LLC) or corporation to separate business debts and lawsuits from personal assets. Neither state's electrical licensing law requires a particular structure, but the structure changes your licensing paperwork:
- Texas: TDLR licenses the business as the electrical contractor and ties it to a master of record. Form the entity first so the license, insurance certificate and workers' compensation filing all carry the same legal name.
- Florida: form the LLC or corporation with the Florida Division of Corporations (Sunbiz), register any fictitious name you will use, then apply to qualify the business with DBPR. The DBPR application lists the entity's officers or members, and the workers' compensation officer exemption depends on being listed as an officer with the Division of Corporations.
Liability protection is not absolute. Licensing boards can discipline the qualifier personally, and insurers and sureties often ask owners for personal guarantees. Tax treatment (sole proprietor, partnership, S corporation election) is a question for a CPA.
Sales tax, contracts and liens: the paperwork that protects you
Sales tax
Texas taxes contractors differently by job type. The Comptroller's rules are 34 TAC 3.291 (contractors: new construction and residential repair and remodeling) and 34 TAC 3.357 (nonresidential repair, remodeling and restoration). Under 3.357, the old difference between lump-sum and separated contracts no longer matters for nonresidential repair and remodeling, and a contract that mixes nonresidential remodeling with new construction is taxable in total unless the new construction labor is separately stated. Under 3.291, contractors pay sales tax on equipment they buy or rent to do the work. New usable square footage counts as new construction; moving interior walls is remodeling. Have a CPA set up your invoicing by job type from day one. Florida has its own rules for contractors and materials; ask the Florida Department of Revenue or a CPA.
Home solicitation and cancellation rights
Texas's three-day cancellation law for home solicitation sales does not apply to services from a TDLR electrical license holder when the consumer initiated the transaction, except for breach of express warranty or negligent installation that violates the building code (Occ. Code 1305.004). In Florida, a home solicitation sale over $25 gives the buyer until midnight of the third business day to cancel, but the definition excludes sales that result from the buyer's own request for specific goods or services (s. 501.021). If your sales team knocks doors, the cancellation rules apply.
Lien rights and required notices
| Item | Texas | Florida |
|---|---|---|
| Contract notice to homeowners | Give the statutory "Know Your Rights and Responsibilities Under the Law" disclosure before signing a residential construction contract (Prop. Code 53.255) | Contracts over $2,500 on 1-4 unit homes must include the statutory lien law notice in 12-point bold capitals (s. 713.015) |
| Homestead | To lien a homestead, a written contract signed before work begins, signed by both spouses if married, filed with the county clerk (53.254) | Notice of commencement required before the first inspection for jobs over $5,000 (s. 713.135), with HVAC repair exception under $15,000 |
| Deadline to file a lien (original contractor) | 15th day of the 3rd month after completion (residential); 4th month (non-residential) (53.052) | Record a claim of lien within 90 days after final furnishing (s. 713.08) |
| Subcontractor notice | Notice of unpaid claim by the 15th day of the 2nd month (residential) or 3rd month (non-residential) (53.056) | Notice to owner within 45 days of starting work if not in privity (s. 713.06) |
Licensing protects your right to get paid. In Florida, a contract entered into by an unlicensed contractor is unenforceable by that contractor, with no lien or bond rights (s. 489.128 and its Part II counterpart, s. 489.532). See warranties and callbacks.
How do I price electrical jobs profitably?
No neutral, dated industry survey of electrical contractor profit margins was located for this guide, so treat any single "good margin" number you see online with caution, especially from software vendors. What you can control is the method.
1. Know your true hourly cost
Start with each worker's wage, then add the "labor burden": payroll taxes, workers' compensation (if you carry it), health and other benefits, paid time off and training. Then divide by billable hours, not paid hours. Drive time, estimates, supply house runs and callbacks are paid but not billed.
2. Recover overhead
Add up a year of overhead: office, trucks, fuel, insurance, licenses, software, marketing, tools, accounting and your own salary as manager. Divide by expected billable hours to get an overhead cost per hour. Your price per hour must cover labor cost plus overhead before profit.
3. Understand markup vs margin
| If your cost is $1,000 and you | Price | Gross margin |
|---|---|---|
| Mark up 25% | $1,250 | 20% |
| Mark up 50% | $1,500 | 33% |
| Mark up 100% | $2,000 | 50% |
Margin is profit divided by price; markup is profit divided by cost. Mixing them up is the most common way new contractors underprice.
4. Choose a pricing model by job type
- Flat-rate (task) pricing for service calls: a published price per task (replace a GFCI, add a circuit) built from average time, materials and overhead. Customers like knowing the price up front.
- Time and materials for troubleshooting with unknown scope, with a clear hourly rate, trip charge and materials markup in writing.
- Unit or assembly pricing for new construction and commercial bids: labor units per device, foot of conduit or fixture, adjusted for conditions.
5. Sanity-check against market data
The most useful dated public cost data is Lawrence Berkeley National Laboratory's August 2026 survey of building professionals. It found median single-family costs of $3,500 for a main panel replacement (middle half $2,100 to $5,000), $1,500 for a subpanel replacement ($775 to $2,500), and $5,000 per home for rewiring hazardous or undersized conductors ($1,000 to $7,500). Samples were small and national, not Texas or Florida specific, but if your price for a typical panel swap is far outside that range, find out why. See electrician costs.
6. Track job costing
After every job, compare estimated to actual hours and materials. Patterns tell you which job types make money and which quietly lose it.
How do I hire apprentices and stay compliant?
Texas
- Every apprentice needs a TDLR apprentice license before doing electrical work (age 16 or older; $20; renew yearly; 4 hours of continuing education per renewal). Employing an unlicensed individual for electrical work is a Class C misdemeanor (Occ. Code 1305.303).
- Apprentices work under the general supervision of a master, journeyman or residential wireman. Sign off their hours honestly; falsifying on-the-job training certification is also a Class C misdemeanor.
- If you want to run your own training program, TDLR registers apprentice training programs (the fee schedule lists $95 for registration under 16 TAC 73.80).
Florida
- Helpers and apprentices work as employees under your license (s. 489.503(1)), so your company is responsible for their work.
- Registered apprenticeship programs are registered with the Florida Department of Education under Chapter 446; an apprentice signs a written agreement with the sponsor.
- If you install burglar alarms, employees performing alarm agent duties need 14 hours of approved training within 90 days, a Florida Department of Law Enforcement background check and a contractor-issued ID card (s. 489.518). Helpers under direct, continuous, on-site supervision are excepted from the training rule.
- Workers' compensation is required from your first construction employee.
Both states
If you register a program, federal standards in 29 CFR 29.5 require a progressively increasing wage schedule, an entry wage at or above the federal minimum wage where applicable, related classroom instruction (144 hours a year recommended) and periodic evaluations. Apprentices are also covered by OSHA's electrical training rules (29 CFR 1910.332 and the construction standards). See how electricians are trained.
How do electrical contractors get customers?
The short version, covered fully in our electrician marketing guide:
- Google Business Profile. Google says local results are based mainly on relevance, distance and prominence, and that more reviews and positive ratings can help local ranking. Service-area businesses get one profile for the central office, cannot list an unstaffed virtual office, and must use their real business name without extra keywords.
- Google Local Services Ads. Google treats electricians as an "urgent" category with extra screening, including background checks, and may check state-level business and owner licenses and general liability insurance. You pay per valid lead.
- Reviews, done legally. The FTC's rule at 16 CFR Part 465 bans fake reviews and paying for reviews conditioned on positive (or negative) sentiment. Google bans incentives for reviews and selectively asking only happy customers.
- Repeat and referral work. Builders, property managers, HVAC and plumbing companies, realtors and home inspectors send steady work to electricians who show up and close permits.
- Show your license. Put your TDLR or DBPR license number on your website, trucks (required in Texas), estimates and ads. Florida law bars advertising electrical contracting without a valid license (s. 489.531).
What software do electrical contractors use?
You do not need everything on day one. Software falls into a few categories; choose by what is costing you the most time or money now. We do not recommend specific brands.
| Need | Category | Start when |
|---|---|---|
| Bookkeeping, payroll, sales tax | Accounting software plus a payroll service | Day one |
| Scheduling, dispatch, invoices, payments | Field service management (FSM) | Once you have more than one truck or a dispatcher |
| Bids for new construction and commercial | Estimating and takeoff software with labor units | When you start bidding from plans |
| Flat-rate service prices | Price book (often inside FSM) | When you do enough service calls to standardize |
| Code lookup and calculations | NEC references and load calculation tools | Day one; match the edition your jurisdiction enforces |
| Safety records | Training logs, lockout/tagout procedures, incident reports | When you hire your first employee |
Ask any vendor: Can I export my customer and job data if I leave? What does it cost per user per month after the introductory price? Does it handle Texas job-type sales tax and Florida permit numbers on invoices?
How do I bid commercial electrical work?
- Get on bid lists. General contractors and public owners prequalify subcontractors. Have ready: license numbers, insurance certificate (with limits above state minimums), workers' compensation proof, safety program and experience list.
- Read the whole bid package. Drawings, specifications, addenda, schedule, retainage terms, insurance and bonding requirements, and who is responsible for permits and temporary power.
- Do a careful takeoff. Count devices and fixtures, measure conduit and feeders, and apply labor units adjusted for building height, access and schedule.
- Price the general conditions. Supervision, lifts, dumpsters, temporary power and lighting, testing, as-builts, permits and inspections.
- Write clear inclusions and exclusions. State what you assumed about low-voltage, fire alarm, utility fees and patching. In Florida, if you hold an ER license you must subcontract alarm work except raceways (s. 489.537(2)(b)).
- Know the tax and lien rules for commercial work. In Texas, nonresidential repair and remodeling is generally taxable (34 TAC 3.357), and lien deadlines run a month longer than residential (Prop. Code 53.052, 53.056). In Florida, serve your notice to owner within 45 days if you are not in privity with the owner (s. 713.06).
- Follow up. Ask for bid results, even when you lose. Your number versus the winner's tells you where your pricing stands.
More: commercial electrical services and tenant build-outs.
Texas vs Florida at a glance
| Item | Texas | Florida |
|---|---|---|
| Business license | TDLR electrical contractor license ($110, annual) | ECLB business qualification under a qualifying agent (renews every 2 years) |
| Who qualifies the business | Master electrician of record (owner or employee) | Certified (EC) or registered (ER) contractor as qualifying agent |
| Replace the license holder | Within 30 business days | Within 60 days (qualifier notifies within 30) |
| Liability insurance | $300k per occurrence / $600k aggregate / $300k completed operations | Amount set by ECLB rule |
| Workers' compensation | Optional for most private employers; non-subscribers must notify TDI | Required with 1+ employee in construction; up to 3 officer exemptions |
| State bond | None listed by TDLR | Local bond up to $5,000 allowed |
| Local requirements | City permits and inspections; Houston registration | County and city business tax receipts, permits, local registration for ER |
| Vehicle lettering | Required: name and license number, 2-inch letters, both sides | License number required on permits and advertising rules apply |
| Continuing education | Contractor: none (master: 4 hours yearly) | 11 hours per 2-year cycle |
How to choose a provider
- Confirm the qualifying license: Texas master or Florida EC/ER qualifier.
- Form your LLC or corporation and register any fictitious name.
- Get an EIN and a separate business bank account.
- Buy liability insurance at or above state minimums and customer requirements.
- Decide workers' compensation (Texas) or buy it (Florida, from your first employee).
- File the TDLR contractor application or the DBPR business qualification.
- Register with cities (Houston) or get Florida business tax receipts and any local bond.
- Set up Texas job-type sales tax with a CPA; ask Florida DOR about materials tax.
- Prepare contracts with Texas disclosure statements or Florida lien law notices.
- Letter your trucks with name and license number.
- Build a cost-based price book and track job costing on every job.
- License every Texas apprentice before day one and log their hours.
Related electricians guides
- Marketing an Electrical Contracting Business: Reviews, Google Business Profile, AI Search and Lead Services
- How to Become an Electrician in Texas or Florida: Training, Apprenticeships, Pay and Timeline
- Texas Electrician Licenses Explained: TDLR Master, Journeyman, Residential Wireman, Apprentice and Contractor
- Florida Electrician Licenses Explained: ECLB Certified vs Registered, Specialty and Alarm Licenses
- Workplace Electrical Safety for Small Businesses: OSHA Rules, Panels, Extension Cords and Inspections
- What Do Small Businesses Need to Know About Commercial Electrical Work in Texas and Florida?
- How Much Do Electricians Charge in Texas and Florida? Wages, Service Calls and Job Prices
- What Electrical Work Warranties Cover, How Long They Last, and What to Do When Work Fails
Electricians by state and city
Questions people ask
How long does it take to get an electrical contractor license in Texas?
If you already hold a Texas master electrician license (or employ one), the contractor license is mainly paperwork: the application, $110 fee, TDLR's certificate of insurance form and your workers' compensation proof or opt-out filing, plus a criminal history check. Processing times vary. The long part is the master license itself, which needs 12,000 hours of on-the-job training and at least two years as a licensed journeyman before you can sit for the master exam.
Can a Florida registered (ER) contractor work in other counties?
Only where the contractor holds local competency. DBPR says registered licenses allow work only in the cities or counties where the contractor holds a local competency card, while certified (EC) licenses are statewide. A registered contractor can add counties through DBPR's add-a-county process if it qualifies locally there. Contractors who plan to work across Florida usually pursue state certification under s. 489.511 to avoid juggling local cards.
Do I need a separate license to install low-voltage, alarm or EV chargers?
It depends on the state and the work. Texas exempts Class 1, 2 and 3 remote control, signaling and power-limited circuits, fire alarm circuits and communications circuits from electrician licensing, but EV charger circuits are ordinary electrical work. Florida licenses alarm system contractors separately, and registered electrical contractors must subcontract alarm work other than raceways. EV chargers need an electrical license and usually a permit in both states.
What happens if I do electrical work without a contractor license?
In Texas, performing or offering electrical work without the required license, or employing unlicensed people, is a Class C misdemeanor, and TDLR can also impose administrative penalties and cease-and-desist orders. In Florida, contracting or advertising electrical contracting without a license is prohibited, and contracts by an unlicensed contractor are unenforceable by that contractor, with no lien or bond rights. Local governments can also refuse permits and stop jobs.
Can I use my Texas master license to start a company in Florida?
Not directly. Florida licenses contractors through the ECLB, and a Texas master license does not automatically qualify a Florida business. You would need to qualify for Florida certification under s. 489.511, which can include endorsement or substantially equivalent exam provisions listed on DBPR's site, or register locally under a county competency card. Check DBPR's reciprocity and endorsement pages, and budget time for the financial responsibility review.
How much money do I need to start an electrical contracting business?
No neutral, dated startup-cost survey was located for this guide, and costs vary widely by whether you start from home with one truck or open a shop. Build your own budget: entity formation, license and permit fees, first-year insurance premiums, workers' compensation, a work vehicle and lettering, tools and test equipment, initial inventory, software, marketing, and three to six months of operating costs while receivables come in. Get real insurance quotes before you decide.
Sources
- Texas Occupations Code ch. 1305
- TDLR: Apply for an Electrical Contractor License
- TDLR: Electricians program
- TDLR: Electrician FAQ
- 16 Tex. Admin. Code 73.80, Fees
- Houston Permitting Center: Electrical Inspections
- TDI Division of Workers' Compensation: Employer resources
- 34 Tex. Admin. Code 3.291, Contractors
- 34 Tex. Admin. Code 3.357, Nonresidential Real Property Repair, Remodeling, and Restoration
- Texas Property Code ch. 53 (mechanic's liens)
- DBPR: Electrical Contractors' Licensing Board
- Florida Statutes s. 489.503, Exemptions
- Florida Statutes s. 489.505, Definitions
- Florida Statutes s. 489.510, Evidence of workers' compensation coverage
- Florida Statutes s. 489.511, Certification
- Florida Statutes s. 489.517, Renewal; continuing education
- Florida Statutes s. 489.518, Alarm system agents
- Florida Statutes s. 489.521, Business organizations; qualifying agents
- Florida Statutes s. 489.522, Qualifying agents; responsibilities
- Florida Statutes s. 489.531, Prohibitions; penalties
- Florida Statutes s. 489.533, Disciplinary proceedings
- Florida Statutes s. 489.537, Application of this part
- Florida Statutes s. 489.128, Contracts by unlicensed contractors unenforceable
- Florida Statutes s. 440.02, Definitions (workers' compensation)
- Florida Statutes s. 440.05, Election of exemption
- Florida Statutes s. 440.10, Liability for compensation
- Florida DFS Division of Workers' Compensation: Exemptions
- Florida Division of Corporations: Start a Business
- Florida Statutes s. 501.021, Home solicitation sale definitions
- Florida Statutes s. 713.015, Mandatory provisions for direct contracts
- Florida Statutes s. 713.06, Liens of persons not in privity
- Florida Statutes s. 713.08, Claim of lien
- Florida Statutes s. 713.135, Notice of commencement and permits
- 29 CFR 29.5, Standards of apprenticeship (eCFR)
- LBNL (Aug. 2026): survey of panel, service and rewiring costs
- Google Business Profile: Tips to improve your local ranking
- Google Business Profile guidelines
- Google Local Services: Business screening and verification requirements
- 16 CFR Part 465, Use of Consumer Reviews and Testimonials (eCFR)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


