Local Guide · Home EV charger installation
EV-Ready New Home Construction in Texas and Florida: Rough-In Wiring, Code and Builder Options
What EV-capable, EV-ready and EV-installed mean, why we found no Texas or Florida mandate, what the 2026 NEC adds for new dwellings and how to ask a builder for rough-in wiring.
EV-ready means a new home has a dedicated 240 volt circuit ending at a box or outlet near the parking space; EV-capable means panel space and conduit only. We found no Texas or Florida state mandate, and Florida Statutes 366.94 preempts local EV charging station ordinances, so rough-in is usually a builder option you must request in writing. Building it in is cheaper than retrofitting.
Key facts
- DOE defines EV-capable as panel capacity, a reserved breaker slot, conduit and sized transformers; EV-ready adds a dedicated circuit to a box or outlet; EV-installed adds the charger.
- EPA says a charger breaker should be at least 125 percent of the charger rating, so a 40 amp charger needs a 50 amp circuit.
- Florida Statutes 366.94(2) bars local governments from enacting or enforcing ordinances related to EV charging stations, including associated parking spaces.
- We found no EV-ready mandate in the Texas or Florida sources loaded, and whether a Texas city may adopt one is unconfirmed.
- The 2026 NEC counts EV charger load at 100 percent of nameplate in the dwelling optional load method (120.82(D)), per a trade-press summary.
- Texas adopted the 2026 NEC effective September 1, 2026; Florida's 9th Edition code with the 2023 NEC takes effect December 31, 2026.
- A 2016 PG&E study cited by PNNL found $920 per EV space new versus $3,710 retrofit in a 10-space building.
- DOE's March 2026 guide cites $1,410 per space new versus $4,443 retrofit for a 60-unit apartment example.
- NREL says a single-family Level 2 install may cost $400 to $1,000 on average (September 2024).
What does EV-ready mean in a new home?
Builders and codes use three levels. The U.S. Department of Energy (DOE) describes them in its March 2026 multifamily charging guide, and the same three terms are used for single-family homes (DOE guide).
| Level | What is in place | What you still need |
|---|---|---|
| EV-capable | Panel has room for a 40 amp, 208/240 volt circuit, a breaker slot is reserved, conduit (raceway) is run, and the transformer is sized for future EV load. No charger or circuit wiring is installed, but a junction box is near the parking space. | Wire, breaker, outlet or charger |
| EV-ready | Everything in EV-capable, plus a dedicated branch circuit that ends in a junction box or outlet near the parking space. A driver can plug in a cord and charge. | A charger or cord |
| EV-installed | EV-ready plus an actual charger. | Nothing, but check the charger's listing and warranty |
A DOE-hosted technical brief by Pacific Northwest National Laboratory (July 2021) gives sample code language, and says that for one- and two-family dwellings with dedicated off-street parking, model requirements typically call for a Level 2 EV-capable or EV-ready outlet provision for at least one parking space per residence (PNNL technical brief, 2021). Definitions are not uniform across jurisdictions. Some call for 40 amps and some for less. If your builder uses the term, ask what exactly is included.
This is different from a charger. EV-ready means the wiring and capacity are in the house, ready for a charger. See the charging levels guide.
Does Texas or Florida require EV-ready wiring in new homes?
We found no state mandate in either state in the sources we loaded. Neither Florida Statutes section 553.73 on the Florida Building Code (Fla. Stat. 553.73) nor Texas Local Government Code Chapter 214 (Texas Local Government Code Chapter 214) had EV-ready provisions in the text we loaded. That is a negative finding, not proof that none exists. Ask your city building department and builder for the current requirements, and read the adopted code for your permit date.
Florida
Florida Statutes 366.94(2) preempts regulation of EV charging stations to the state. It says a local government may not enact or enforce an ordinance or regulation related to EV charging stations, and defines "station" to include the equipment, supporting equipment and associated parking spaces. Section 366.94(3)(c) says local governments must issue permits for EV charging stations based solely on standards in FDACS rules and other applicable state law (Fla. Stat. 366.94). The FDACS says the 2024 Legislature preempted EV charging station regulation to the state and adopted Rule 5J-28 (FDACS).
Does that stop a city from requiring EV-ready wiring in new homes? That is a legal question we could not answer from these sources. The statute speaks of charging stations, and EV-ready wiring in a house is not obviously a "station," but a new-home mandate could be argued to relate to one. The 2021 PNNL brief lists a Florida example: Winter Park adopted a Land Development Code amendment requiring non-residential properties to have at least 10 percent of parking spaces Level 2 EV-ready (PNNL, 2021). That predates the 2024 preemption, and its current status is not verified. Ask the city before you rely on it.
Section 366.94(1) also says the section does not affect an individual's or business's ability to acquire, install or use a charger for their own vehicle. Home chargers still need building and electrical permits.
Texas
We found no Texas statute requiring EV-ready new homes and none that bans a city from adopting one. Texas Property Code Chapter 202 protects solar energy devices and standby generators in owners' association rules but has no EV charger section, and the tenant right bill HB 3706 did not advance past committee referral (Texas Property Code Chapter 202). Whether a Texas city may require EV-ready wiring is unconfirmed here. Cities may amend the state electrical code only to be at least as strict. Ask the city and, for a legal opinion, a Texas attorney.
Can a city mandate EV-ready homes?
In some other states, yes. The PNNL brief lists local ordinances and codes in California, Colorado, Illinois, Georgia, Washington and other places, and shows the typical structure: at least one EV-ready or EV-capable space per dwelling for single-family homes, and percentages of parking spaces for apartments and commercial buildings (PNNL, 2021). Most of those rules come from jurisdictions with different legal frameworks than Texas and Florida.
For Texas and Florida homebuyers, the practical answer is:
- Do not assume a California-style mandate applies to your lot.
- Look at your city's adopted building code and local amendments for your permit date, and ask the city's building department directly.
- If your city has no rule, any EV-ready work is a builder option that you must request.
Texas cities may amend the state electrical code only to be at least as stringent as the National Electrical Code, per TDLR (TDLR bulletin). That rule is about electrical safety, not EV mandates, and we did not verify how it applies to EV-ready requirements.
What should I ask the builder to include?
A reasonable EV-ready package for a new single-family home has five parts. These are drawn from the DOE definitions and the EPA's home charging guidance, and your electrician or the builder's electrician must size them for your house.
- A dedicated circuit. EPA says the breaker should be at least 125 percent of the charger rating, so a 40 amp charger needs a 50 amp circuit (EPA home charging guide). DOE says wiring size and overcurrent protection are 125 percent of the nameplate continuous rating (DOE). Ask for a 50 amp, 240 volt circuit, or whatever your electrician recommends for your likely charger.
- Panel capacity and space. EPA says a home with at least 200 amps of service and two open double-pole breaker slots likely has capacity for Level 2 charging, though capacity depends on other loads (EPA). Ask the builder to show your load calculation, and to leave breaker slots free.
- Conduit. A raceway from the panel to the parking location, with a pull string or the wire already in. Ask for conduit large enough for future upgrades. Run it before drywall and before the slab is poured when possible.
- Location. Put the outlet or junction box near where the car actually parks, accounting for charge port location and cord length. For a two-car garage, consider a second location.
- Termination. Choose between a receptacle and a hardwired box. DOE says hardwired chargers are typical for Level 2 stations while outlets allow plug-in cords. EPA says chargers rated at 48 amps or higher are usually required to be hardwired (EPA). See plug versus hardwired.
Extras worth asking about
- A label on the panel directory showing the EV circuit and its purpose.
- Space and conduit for a future solar system or battery. See solar plus EV charging.
- A load management device or smart panel if the service is tight. DOE lists meter collars, circuit splitters and smart breakers as ways to fit a charger within limited capacity (DOE). See load management.
- Photos of the wiring before drywall, and as-built drawings that show where conduit runs.
What does the 2026 NEC require for new dwellings?
Texas adopted the 2026 National Electrical Code (NEC) effective September 1, 2026 for non-exempt electrical work statewide, per TDLR's July 28, 2026 vote and published rule (TDLR rule notice). Houston told applicants that permit applications on or after that date are reviewed for compliance with it (Houston Permitting Center). Do not use the 2023 NEC as the Texas rule.
A trade-press summary of the 2026 NEC (EC&M) lists changes that matter for a new home (EC&M top 25 changes). Confirm each one in NFPA 70-2026:
- 120.82(D): In the dwelling-unit optional load calculation method, EV charger load is counted at 100 percent of its nameplate with no demand factor. Load calculation rules moved into a new Article 120. So the electrical service for a new home with an EV circuit should be sized with the charger counted fully.
- 625.4: Permanently installed Level 2 or higher chargers must be installed by a qualified person.
- 625.5: Permanent field markings on charger enclosures.
- 625.43(D): An emergency shutoff applies to other than one- and two-family dwellings, so it does not apply to a typical house garage.
- 625.44: 30, 50 and 60 amp receptacles used for EV charging must be listed for EVSE use.
Texas also approved an amendment to 210.8(F) so GFCI protection is not required for outdoor dwelling-unit HVAC outlets. TDLR's notice does not say it affects EV circuits. A proposed Tentative Interim Amendment, TIA 1892, would revise 625.54 so GFCI protection applies to EVSE receptacles (NFPA TIA 1892). It is only proposed. See GFCI and listing and 2026 NEC changes.
Florida edition dates
The 8th Edition (2023) Florida Building Code applies to permits until the 9th Edition (2026) takes effect December 31, 2026, which also adopts the 2023 NEC (ICC summary). The edition in effect on the date of permit application governs the work for the life of the permit, so a home permitted in December 2026 stays under the older edition. Miami-Dade says online applications received after 4 p.m. on December 30, 2026 fall under the 2026 edition (Miami-Dade PIC). Jacksonville lists the 8th Edition as the code in effect for permits submitted on or after January 1, 2024 (City of Jacksonville). Which NEC edition the 8th Edition references was not verified here, so ask the city.
Note: 2026 NEC section numbers in this guide come from published trade summaries and may be renumbered in the final adopted text. Confirm them in NFPA 70-2026 or with your electrician and local inspector before relying on them.
How much does rough-in cost, and is it cheaper now?
We do not give a single price for Texas or Florida homes, because we found no named Texas or Florida study of new-home rough-in costs. Ask the builder for a written quote for the exact package. What we can cite are studies that compare building it in with adding it later:
| Study | Finding |
|---|---|
| PG&E cost-effectiveness study for San Francisco, 2016 (cited in the PNNL brief) | Per EV space with an electric circuit in a 10-space building: $920 new construction versus $3,710 retrofit. In a 60-space building: $860 versus $2,370. |
| California Air Resources Board staff review (cited in the PNNL brief) | About $7,000 per parking space avoided for multiple Level 2 installations, and about $8,000 avoided for an individual installation. |
| Salcido and others, 2024 (cited in DOE's March 2026 guide) | For a 60-unit apartment building with 9 Level 2 and 45 Level 1 ports: $1,410 per space new versus $4,443 retrofit, and $76,142 total versus $239,909. |
| NREL, September 2024 | Installing a Level 2 charger at a single-family home may cost $400 to $1,000 on average, varying with equipment, labor and electrical upgrades. |
Sources: PNNL technical brief (2021), DOE guide (March 2026) and NREL (2024). Most of these are apartment or California examples, not Texas or Florida single-family homes, so treat them as direction, not a quote. The consistent message: building the wiring in during construction avoids breaking and repairing walls, longer conduit runs and more expensive service upgrades. DOE says in a multifamily setting, upgrading electrical service and transformers can be very costly and add months of delay.
So yes, it is usually cheaper to rough in now. How much cheaper depends on your plan, your lot and your builder's pricing.
How do I add EV-ready work to a builder contract?
Treat it like any other option. Ask for it before the electrical rough-in is scheduled, because changes after drywall cost more.
- Request it in writing. Add a line to the options sheet or an addendum: "EV-ready: dedicated 240 volt, 50 amp circuit with conduit and receptacle or junction box at (location)."
- Name the standard. Say the work must meet the NEC edition and local code in effect for your permit date.
- Define what is included. List breaker, wire size, conduit type, receptacle or junction box type, panel space and any load management.
- Ask for the price as a separate line. This lets you compare against retrofit later.
- Add a verification step. Photos before drywall, a labeled panel directory and a copy of the permit and final inspection.
- Ask for the licensed contractor's name and license number. In Texas, TDLR lists license numbers. In Florida, use DBPR's lookup. See who can install in Texas and in Florida.
- Keep the charger itself separate. You may want to choose a charger later. Make sure the contract says the builder does not supply an unlisted or non-certified unit. DOE recommends NRTL-certified equipment, and names ANSI/UL 2594 for Level 2.
Ask a licensed attorney to review the contract if the project is large. This is general information, not legal advice.
Do new homes need a separate permit for the charger?
Usually the charger circuit is part of the home's electrical permit when it is built with the house, and the inspector checks it at the electrical rough-in and final inspections. If the charger is installed after the home is finished, you or your electrician applies for a separate electrical permit. See Texas and Florida permit guides and the city pages for Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando and Jacksonville. Examples of city portals:
- The Houston Permitting Center combines most City of Houston permitting and licensing and houses Electrical Inspections. Houston's 2026 NEC notice lists (832) 394-8860 for Electrical Inspections (Houston Permitting Center notice).
- The City of Dallas takes all permit submittals through the DallasNow portal (City of Dallas).
- The City of Tampa uses Accela Citizen Access, and its Construction Services can be reached at (813) 274-3100 option 1 (City of Tampa).
- The City of Orlando requires a recorded Notice of Commencement when a permit's contract price exceeds $5,000 (City of Orlando).
- Jacksonville requires online submission through JaxEPICS (City of Jacksonville).
Texas Occupations Code 1305.201 lets a city require inspections but bars it from collecting permit or registration fees from a licensed electrician beyond the building permit fee. Your builder handles most of this, but ask who owns the permit and who calls the inspections.
What about townhomes, condos and apartment buildings?
For multifamily buildings, EV-ready rules are written as percentages of parking spaces. The PNNL brief lists examples such as 5 percent EV-installed, 15 percent EV-ready and 75 percent EV-capable for certain multifamily buildings in one model option, and notes that these are local choices (PNNL, 2021). Texas and Florida have no state percentage that we found. Do not assume yours does.
DOE says that for multifamily owners, a utility service upgrade can take several months and add tens of thousands of dollars, and that charging is ultimately limited by the size of the site's electrical service and transformer (DOE, March 2026). DOE's definition of EV-capable includes sizing transformers for anticipated future EV loads, which is cheaper at the design stage.
After the building is occupied, Florida condo owners have a statutory right to install a charger in their own limited common element or assigned parking, subject to conditions (Fla. Stat. 718.113(8)). Texas has no equivalent statute in the text we loaded. See the Florida condo law guide, multifamily installation and apartment charging options.
If you are a buyer of a new condo or townhome, ask the developer in writing which spaces are EV-capable or EV-ready, who owns the conduit and where the meter is.
Should I install a 240 volt outlet during construction?
Many people do. A 240 volt outlet or a junction box at the parking space gives you a way to plug in a portable charger or have an electrician add a hardwired one later. The choice depends on which charger you might buy.
- DOE (March 2026) says Level 1 chargers plug into NEMA 5-15 or 5-20 receptacles, reduced-power Level 2 chargers use NEMA 6-50, and Level 2 chargers can use a variety of 30 or 50 amp NEMA receptacles (DOE).
- EPA says chargers rated at 48 amps or higher are usually required to be hardwired, while hardwiring also gives better safety and an outlet lets you swap chargers without an electrician (EPA).
- A 2026 NEC summary says 30, 50 and 60 amp receptacles used for EV charging must be listed for EVSE use (EC&M).
If you do not know what you will buy, a junction box on a correctly sized circuit is the most flexible option. If you want a plug, ask the builder to use an EVSE-listed receptacle. Either way, never use an extension cord or an unlisted adapter. See how many amps and wire size and breaker size.
How to choose a provider
- Ask the city building department what code and amendments apply to your permit date.
- Request EV-ready work in writing before the electrical rough-in is scheduled.
- Specify a dedicated 240 volt circuit sized with the 125 percent rule, such as a 50 amp circuit for a 40 amp charger.
- Ask the builder to show your service load calculation and leave breaker slots open.
- Choose the parking location and run conduit from the panel before drywall or slab pour.
- Choose a junction box or an EVSE-listed receptacle.
- Ask for a separate price line for the EV-ready package.
- Ask for photos of the wiring before walls close and as-built conduit drawings.
- Request a labeled panel directory.
- Confirm the licensed electrician's name and license number.
- Ask about space and conduit for future solar or a battery.
- Keep the permit, inspection approval and electrical drawings in your home file.
Related home ev charger installation guides
- How Many Amps Do You Need for a Home EV Charger? 16, 32, 40 or 48 Amps Explained
- EV Charger Wire Size, Breaker and Circuit Requirements (Copper vs Aluminum, 6 AWG vs 8 AWG)
- NEMA 14-50 vs NEMA 6-50 vs Hardwired EV Charger: Which Is Better, and What About Cords and Adapters?
- Can My Electrical Panel Handle an EV Charger? 100 Amp, 150 Amp and 200 Amp Panels
- EV Charger Load Management and Smart Panels: Add a Charger Without a Panel Upgrade
- 2026 NEC Changes for EV Chargers: What Texas (Sept 1, 2026) and Florida (Dec 31, 2026) Homeowners Need to Know
- Solar Panels and EV Charging in Texas and Florida: Sizing, Net Metering Rules and Charging Schedules
- What Does Florida Law Say About EV Charging Stations? Section 366.94, FDACS Rule 5J-28 and Local Preemption
Home EV charger installation by state and city
Questions people ask
What does EV-ready mean?
EV-ready means the home has a dedicated 240 volt circuit ending in a junction box or outlet near the parking space, so a charger or portable cord can be connected without more wiring. EV-capable means only panel space, a reserved breaker slot and conduit. EV-installed means the circuit and the charger are both in place.
Does Texas or Florida require EV-ready wiring?
We found no state mandate in the Texas or Florida sources we loaded. Some cities elsewhere in the country require it, but you should not assume your city does. Ask the building department for the code and local amendments in effect on your permit date. Without a rule, EV-ready work is a builder option you request.
Can a city mandate EV-ready homes?
In Florida, section 366.94 preempts local ordinances related to EV charging stations, including associated parking spaces. Whether that covers a home wiring mandate is a legal question we could not answer. In Texas, we found no statute that expressly allows or bans it, and the question is unconfirmed. Ask the city and, if it matters, an attorney.
What is the difference between EV-capable, EV-ready and EV-installed?
EV-capable has panel capacity, conduit and a reserved breaker slot. EV-ready adds a dedicated branch circuit ending in a box or outlet. EV-installed adds the charger. DOE's March 2026 guide describes the three categories. Local codes may define them differently, so ask the builder what exactly is included.
How much does rough-in cost?
We found no Texas or Florida study of new-home rough-in costs, so ask the builder for a written quote. Studies cited by PNNL and DOE show building the circuit in costs a fraction of retrofitting, for example $920 new versus $3,710 retrofit per space in a 2016 PG&E study and $1,410 versus $4,443 in a 2024 apartment example. Those are not Texas or Florida quotes.
What conduit and panel space should I ask for?
Ask for a dedicated 240 volt circuit sized at 125 percent of the likely charger, conduit from the panel to the parking spot, reserved breaker slots and a load calculation. EPA says 200 amp service with two open double-pole slots likely has capacity, but capacity depends on other loads. Ask for room for solar or a battery too.
Should I add a 240 volt outlet during construction?
Often yes, or a junction box. A box is the most flexible if you do not know which charger you will buy. If you want a plug, ask for an EVSE-listed receptacle, since the 2026 NEC summary says 30, 50 and 60 amp EV receptacles must be listed for that use. Chargers rated 48 amps or higher are usually hardwired.
Do new homes get permits for chargers?
The charger circuit is normally part of the home's electrical permit, with inspections at rough-in and final. A charger added later needs its own electrical permit. Ask your builder who owns the permit and who schedules inspections. Each city has its own portal and fees.
How does the Florida Building Code treat EV charging?
We did not find EV-ready requirements in the Florida Statutes sections we loaded. Florida's 8th Edition applies to permits until December 31, 2026, then the 9th Edition takes effect with the 2023 NEC. The edition in effect on the permit application date governs the work. Check with your city for the current code.
What does the 2026 NEC require for new dwellings?
A trade-press summary reports that EV charger load counts at 100 percent in the dwelling optional load calculation, that permanently installed Level 2 chargers must be installed by a qualified person, and that 30, 50 and 60 amp EV receptacles must be EVSE-listed. Texas applies the 2026 NEC from September 1, 2026. Confirm each item in NFPA 70-2026.
How do I add it to a builder contract?
Add a written option or addendum that names the circuit size, conduit, box or receptacle, location and panel space, the code edition, and a separate price. Ask for photos before drywall and a copy of the permit and inspection. Keep the charger purchase separate so you can choose a listed unit later.
Is it cheaper to add rough-in now?
Usually yes. Studies cited by PNNL and DOE show retrofit costs several times higher because of wall repair, longer conduit and service upgrades. Your actual savings depend on your plan and builder. NREL reports single-family Level 2 installs may cost $400 to $1,000 on average, so rough-in is a way to avoid the cost of opening finished walls.
Sources
- DOE: Electric Vehicle Charging for Multifamily Housing (March 2026)
- PNNL and DOE: EV Charging for Residential and Commercial Energy Codes technical brief (July 2021)
- EPA: Getting started with home EV charging
- EC&M: Top 25 changes to the 2026 NEC
- NFPA: Proposed TIA 1892 to NFPA 70
- TDLR: Commission adopts 2026 NEC rules
- TDLR bulletin: 2026 NEC adoption
- Houston Permitting Center: 2026 NEC effective September 1, 2026
- Houston Permitting Center
- ICC: Florida adopts new building codes
- Miami-Dade: Florida Building Code Ninth Edition change
- Florida Statutes 366.94
- Florida Statutes 553.73
- Texas Local Government Code Chapter 214
- FDACS: EV charging stations
- Florida Statutes 718.113
- Texas Property Code Chapter 202
- Texas Occupations Code Chapter 1305
- NREL: Charging infrastructure report (September 2024)
- City of Dallas: Permitting and Inspections
- City of Tampa: Construction Services
- City of Orlando: Permits and Inspections
- City of Jacksonville: Building Inspection Division
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


