New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · General and residential contractors

Bathroom Remodel Guide: Process, Waterproofing, Permits and Hiring in Texas and Florida

How to plan a bathroom remodel that does not leak: scope choices, 2025 costs for Texas and Florida cities, plumbing licensing, permits, shower waterproofing and flood tests, ventilation, accessible design and Florida condo rules.

Plan a bathroom remodel by choosing the scope (refresh, same-layout replacement, layout change, expansion or accessible design), then hiring a contractor who uses licensed plumbers and electricians, pulls permits and installs a named shower waterproofing system with a flood test before tile. In 2025, a midrange bath remodel averaged about $21,000 to $26,000 in Texas and Florida metros. Vent the fan outdoors, add grab-bar blocking, and in a Florida condo get association approval first.

Key facts

  • A midrange bath remodel averaged $20,985 to $25,565 across Houston, Dallas, Austin, San Antonio, Miami and Jacksonville in the 2025 Cost vs. Value report (U.S. average $26,138).
  • Midrange bath remodels were estimated to recoup 75% to 85% of cost at resale in those metros in 2025; upscale remodels about 40% to 48%.
  • Texas plumbing, including gas piping, requires a license from the Texas State Board of Plumbing Examiners, but an owner may do plumbing in his or her own homestead (Occ. Code 1301.351, 1301.051).
  • Florida contractors must subcontract plumbing, electrical and mechanical work unless they hold those licenses (s. 489.113, Fla. Stat.).
  • DOE's Building America Solution Center says bathroom fans should provide at least 50 cfm intermittent or 20 cfm continuous to meet ASHRAE 62.2 and the IRC.
  • Florida's $7,500 single-family permit exemption (effective July 1, 2026) does not apply to plumbing, electrical, mechanical, structural or gas work.
  • The 2010 ADA Standards set grab bars at 33 to 36 inches high and toilet seats at 17 to 19 inches; they are a reference, not a requirement, for private homes.
  • Florida condo owners can be responsible for uninsured damage to other parts of the condominium caused by their negligence or rule violations (s. 718.111(11)(j)).

How do I plan a bathroom remodel?

Start by deciding which of these five projects you are really doing, because each one changes the cost, the permits and who you need:

  1. Cosmetic refresh. Paint, mirror, lighting fixtures, vanity top or a like-for-like toilet. No pipes move.
  2. Full replacement in the same layout. New tub or shower, tile, vanity, toilet and floor, with fixtures in their current spots. This is what the 2025 Cost vs. Value midrange bath remodel describes: an existing 5-by-7-foot bathroom with a new 30-by-60-inch tub, tile surround, pressure-balanced shower valve, toilet, solid-surface vanity top, recessed medicine cabinet and tile floor.
  3. Layout change. Moving the toilet, converting a tub to a walk-in shower, adding a second sink. Drains and vents move.
  4. Expansion. Borrowing space from a closet or bedroom. The Cost vs. Value upscale bath expands a 35-square-foot bath to 100 square feet inside the existing footprint and relocates every fixture.
  5. Accessible or "universal design" bath. Zero-threshold shower, wider door, grab-bar backing, comfort-height toilet and controls reachable from a seat.

Then work through four questions before you call contractors: What does not work now (storage, lighting, ventilation, mold, safety)? Who uses the room now, and who might in ten years? What is your budget, including a contingency for rot or bad plumbing found behind the walls? And are there rules you must follow, such as a condo declaration, HOA approval, or lead-safe rules for a pre-1978 home?

How much does a bathroom remodel cost in Texas and Florida?

The 2025 Cost vs. Value report gives defined-project averages for Texas and Florida cities. They are useful for judging bids, not as quotes.

Metro (2025 Cost vs. Value)Midrange remodelUniversal design remodelUpscale remodel
Houston$23,503$36,984$75,005
Dallas$23,121$35,974$72,769
Austin$20,985$33,502$69,157
San Antonio$20,985$33,502$69,157
Miami$25,565$40,234$79,971
Jacksonville$24,594$39,061$78,266
South Atlantic region (includes Florida)$25,609$41,203$80,222
West South Central region (includes Texas)$22,995$36,046$73,185
U.S. average$26,138$42,183$81,612

The report shows the same 2025 job costs for Austin and San Antonio, which points to shared cost data; resale values differ. It does not publish Tampa or Orlando figures; use the South Atlantic regional numbers as the closest benchmark.

How much of the cost comes back at resale?

Metro (2025)Midrange: recoupedUniversal design: recoupedUpscale: recouped
Houston75.2%64.3%40.2%
Dallas75.7%58.2%43.5%
Austin85.4%70.1%45.0%
San Antonio84.6%68.2%48.4%
Miami75.1%62.1%42.1%
Jacksonville80.7%61.6%43.3%

These are real estate agents' estimates of value added at sale, collected through a survey of more than 6,000 Realtors. A midrange bath refresh holds value best; luxury expansions mostly pay off in daily use, not at resale.

Who should I hire for a bathroom remodel?

A bathroom packs plumbing, electrical, ventilation, waterproofing, tile and carpentry into a small room. One contractor who coordinates all of it, with licensed trades for the regulated parts, is usually the safest setup.

Do I need a licensed plumber in Texas or Florida?

Texas. Plumbing requires a license, registration or endorsement from the Texas State Board of Plumbing Examiners, and work must be supervised by a licensed plumber; anyone who advertises plumbing must have a responsible master plumber (Occupations Code section 1301.351). There is one important exception: a property owner does not need a plumbing license to do plumbing in his or her own homestead (section 1301.051), though city permits and inspections still apply. You can check a plumber's license through the board's public license search at tsbpe.texas.gov.

Florida. Plumbing contractors hold a Division II license from the Construction Industry Licensing Board, either certified statewide (CF) or registered for specific local areas (RF). A general, building or residential contractor must subcontract plumbing, electrical and mechanical work unless it holds those licenses too (section 489.113). Verify licenses on the DBPR lookup; see Florida contractor license lookup.

Electrical and ventilation

New circuits, outlets, lighting, heated floors and exhaust fans are electrical work. In Texas, electricians are licensed by TDLR (Occupations Code chapter 1305). In Florida, electrical contractors are licensed under Chapter 489, Part II, and must be subcontracted by a general contractor that does not hold that license.

Tile setters, handymen and "bath in a day" products

Tile work is not a separately licensed trade in Texas. In Florida, a general, building or residential contractor can supervise unlicensed subcontractors for work within its scope that does not require a Division II trade license (section 489.113). A handyman may legally do small jobs under Florida's $2,500 minor-work exemption (section 489.103(9)), but the exemption does not apply when the work is part of a larger job or is split to get under the limit. A full bathroom remodel is a contractor job.

For any hire, check licenses, insurance and references, and compare written bids on the same scope. See how to hire a general contractor and questions to ask a contractor.

Do I need a permit to remodel a bathroom?

WorkPermit usually needed?
Paint, mirrors, towel bars, like-for-like vanity topUsually no
Replacing a toilet, a lavatory faucet or fixing a leakOften no in Texas; Occupations Code 1301.551(c) lets cities skip plumbing permits for these
New tub or shower valve, shower pan, moved drain or toiletYes, plumbing
New circuits, outlets, heated floor, exhaust fan wiringYes, electrical
Exhaust fan ducting through roof or wallUsually yes, mechanical or building
Moving or removing walls, enlarging the roomYes, building
New window or exterior door (Florida)Yes; product must have Florida or Miami-Dade product approval

Florida's new permit exemption for single-family work valued under $7,500 (section 553.79, effective July 1, 2026, from Chapter 2026-63) does not cover electrical, plumbing, structural, mechanical or gas work, or homes in a flood hazard area, so it rarely helps with a bathroom. For small single-family permits that do apply, the same law requires local governments to decide complete applications within 5 business days for listed trades when the work is under $15,000 (section 553.792).

In Dallas, a homeowner can pull a homeowner's permit for interior remodeling, plumbing, mechanical and electrical repairs on a homestead after passing a city exam and signing an affidavit that they will do the work themselves without paid help. See Texas permits and Florida permits.

What is shower waterproofing, and how do I make sure it is done right?

Tile and grout are not waterproof. Water and vapor pass through grout lines into whatever is behind them. A shower stays dry inside the walls only because of a continuous waterproof layer behind the tile and under the floor, sloped to the drain. When that layer is missing, torn, or poorly sealed at corners, seams, niches, benches and the drain, water soaks the framing and subfloor for months or years before anyone notices. Rotted framing, loose tile and mold behind the walls are the classic results.

The main systems

SystemHow it worksCritical details
Traditional pan liner with mortar bedA flexible waterproof liner (often PVC or CPE) sits over a sloped base and turns up the walls, with a mortar bed on top and a clamping drain.Pre-slope under the liner, liner turned up the walls and curb, no punctures low on the walls, weep holes at the drain kept clear.
Sheet membraneA thin waterproof sheet bonded to the backer board or substrate with thin-set, with seams overlapped and sealed.Correct overlaps, preformed corners, a drain designed to bond to the membrane, sealed niche and bench corners.
Liquid-applied membraneA paint-on or trowel-on waterproofing applied in coats over the substrate, often with fabric at seams and corners.Thickness matters; the manufacturer specifies the number of coats or wet thickness. Reinforce changes of plane.
Foam board systemsWaterproof foam panels and pans with sealed seams.Use the same maker's sealant, drain and accessories; follow the system's instructions exactly.

Whichever system your contractor uses, the most important rule is to use one system consistently and follow that manufacturer's installation instructions and warranty requirements. Mixing parts from different systems is a common cause of failures and voided warranties.

The flood test

Before tile goes on the floor, a good installer plugs the drain and fills the shower base with water to check for leaks, leaving it for the period the membrane manufacturer or the local inspector requires. Ask for it in writing. Many building departments inspect the shower pan or liner as part of the plumbing inspection; ask yours whether they do. Take photos of the membrane and the test before tile covers it. Those photos are your best evidence if a leak shows up later.

Questions to ask a bathroom contractor about waterproofing

  • Which waterproofing system will you use on the walls and floor, and is it one manufacturer's system?
  • How will you handle the niche, bench, curb, valve and showerhead penetrations?
  • Will you flood test before tiling, and may I see it and photograph it?
  • Does the building department inspect the pan here?
  • Who on your crew installs the membrane, and how many have they done?
  • What warranty do you give on leaks, and does the membrane maker offer a system warranty?
  • What will you do if you find rot or mold when you remove the old shower?

A contractor who answers these clearly is usually one who installs waterproofing carefully. Vague answers such as "the tile and grout keep it sealed" are a warning sign.

How do I avoid mold behind tile?

Mold needs moisture. Keep the wall cavity dry and mold has nothing to grow on. Four things matter most:

  1. Continuous waterproofing in the shower, as described above, with sealed seams and penetrations.
  2. The right backer. Do not tile a shower over ordinary paper-faced drywall. Use a backer board or waterproof panel system that the waterproofing maker approves.
  3. Ventilation that actually runs. The Department of Energy's Building America Solution Center states that to meet ASHRAE 62.2 and the International Residential Code, bathroom fans should provide at least 50 cubic feet per minute (cfm) for intermittent use or at least 20 cfm when run continuously. It notes that, for a 50 cfm intermittent rate, ENERGY STAR recommends a fan rated at least 70 cfm, and for 20 cfm continuous, a fan providing more than 50 cfm, because real ducts reduce airflow. Fans must vent outside, not into the attic. A humidity-sensing control or timer helps make sure the fan runs long enough after a shower.
  4. Fix leaks fast. Loose tile, cracked grout lines near the floor, a soft spot, or staining on a ceiling below are signs water is getting through.

In Florida and along the Texas Gulf Coast, high outdoor humidity makes ventilation and quick drying even more important. If you find mold during demolition, stop and ask the contractor how it will be removed and how the cause will be fixed before walls are closed.

Can I convert a tub to a shower? What about a curbless shower?

Yes. A tub-to-shower conversion is one of the most common bathroom projects. The usual steps are removing the tub and surround, moving or resizing the drain, building a new sloped base or setting a pan, waterproofing, installing a new valve, tiling, and adding a glass door or curtain. Before you remove the only tub in the house, think about resale: some buyers with small children want at least one tub.

Curbless (zero-threshold) showers

A curbless shower has no step at the entry, so the bathroom floor flows into the shower. It looks clean and works for people with walkers or wheelchairs. It is harder to build than a standard shower because the shower floor must still slope to the drain while the entry stays level with the bathroom floor. That usually means one of two things:

  • Recessing the shower floor. On a wood-framed floor, this can mean lowering joists or the subfloor, which may need structural input. On a concrete slab, common in Texas and Florida, it usually means cutting and recessing the slab, plus moving the drain.
  • Raising the rest of the floor. Building up the bathroom floor so the shower area can slope down, which can create a step at the bathroom door instead.

Linear (trench) drains make sloping easier because the floor slopes in one direction. Waterproofing should usually extend beyond the shower area onto the bathroom floor, since water can travel farther without a curb. Ask your contractor how they will keep water inside the shower and what the plan is for the slab or framing.

What is a universal design or aging-in-place bathroom?

Universal design means planning a room that works for people of different ages and abilities without looking institutional. For bathrooms, the most useful technical reference is the federal 2010 ADA Standards for Accessible Design. Those standards apply to public accommodations and some multifamily housing; they are not mandatory for a private single-family home. They are still a good measuring stick for a bathroom that will be used by someone who uses a walker or wheelchair now or may in the future.

ItemADA Standards reference (not required in a private home)
Turning spaceA 60-inch-diameter clear circle, or a T-shaped space in a 60-inch square (section 304.3)
Door clear width32 inches minimum clear opening (section 404.2.3)
Grab bar height33 to 36 inches above the floor to the top of the bar (section 609.4)
Grab bar strengthBar, fasteners and supporting structure must handle 250 pounds of force (section 609.8)
Side wall grab bar at toilet42 inches long minimum, starting no more than 12 inches from the rear wall and extending at least 54 inches from it (section 604.5.1)
Toilet seat height17 to 19 inches above the floor (section 604.4)
Lavatory heightRim or counter 34 inches maximum above the floor (section 606.3)
Roll-in shower size30 by 60 inches minimum inside, with a 60-inch-wide entry (section 608.2.2)
Shower thresholdHalf an inch maximum in roll-in showers (section 608.7)

Even if you are not planning a fully accessible bath, three low-cost steps are worth doing in almost any remodel: install solid wood blocking in the walls around the toilet, tub and shower so grab bars can be added later; choose a pressure-balanced or thermostatic shower valve to prevent scalding; and pick a slip-resistant floor tile. The 2025 Cost vs. Value universal design bath (zero-threshold, 36-inch door, curbless shower with fold-out seat and thermostatic valve, comfort-height toilet, controls at seated height, humidity-sensing fan) averaged $33,502 to $40,234 in the Texas and Florida metros listed above. See our aging-in-place remodel guide for whole-house planning.

Can I remodel a condo bathroom in Florida?

Yes, but the association's rules come first, and water damage is the main legal risk.

  • Approval. Read your declaration and the association's alteration rules. Under section 718.113, Florida Statutes, there can be no material alteration or substantial addition to the common elements except as the declaration provides, and if it is silent, 75% of the total voting interests must approve. Moving a toilet or shower drain can involve common plumbing or the slab, so ask before you design.
  • Water damage liability. Under section 718.111(11)(j), a unit owner is responsible for repair costs not covered by insurance when damage to other parts of the condominium is caused by the owner's or the owner's tenants', guests' or invitees' negligence or failure to follow the declaration or rules. A shower pan that leaks into the unit below is exactly this scenario.
  • Insurance and contractor rules. Many associations require the contractor's certificate of insurance naming the association, set work hours, and control water shutoffs. Get these requirements before you sign the contract.
  • Flood testing. In a condo, ask for the flood test in writing and photographs before tile goes down.

See Florida condo unit renovation for the full process.

How long does a bathroom remodel take, and what order does the work go in?

  1. Design and selections. Choose the tub or shower system, valve, vanity, toilet, tile and fan first. Special-order items set the start date.
  2. Permits and approvals. Plumbing, electrical and building permits as needed; condo or HOA approval.
  3. Demolition. Protect the house, shut off water, remove fixtures, tile and drywall. In pre-1978 homes, the EPA lead rule applies to paid work that disturbs paint.
  4. Repairs and framing. Fix rot, add blocking for grab bars, frame niches and benches, recess the floor for a curbless shower.
  5. Rough plumbing and electrical. New drains, vents, supply lines and valve; new circuits, fan wiring and duct. Rough inspections.
  6. Backer and waterproofing. Install backer board or panels, then the waterproofing system. Flood test. Pan inspection where required.
  7. Tile. Walls and floor, then grout and any sealing.
  8. Fixtures and finish. Vanity, top, toilet, trim, glass, lights, fan, accessories.
  9. Final inspections and punch list.

A cosmetic refresh can be quick. A full gut with new waterproofing has more steps that cannot overlap: membranes and thin-set need cure time, tile needs time before grouting, and glass doors are usually measured only after tile is done. Ask every bidder for a written schedule. If you have only one bathroom, plan where your household will shower during the work.

What are the most common bathroom remodel mistakes?

  1. Treating tile as waterproofing. Insist on a named waterproofing system and a flood test.
  2. Venting the fan into the attic, or an undersized fan. Vent outside and size the fan for real-world airflow.
  3. No blocking for grab bars. It costs little during framing and a lot later.
  4. Choosing the vanity before measuring clearances. Check door swings, toilet clearance and drawer space.
  5. Skipping permits. Shower valves and pans, new circuits and fan ducts are usually permitted work.
  6. Not verifying the plumber. In Texas check the Texas State Board of Plumbing Examiners license search; in Florida check DBPR for a CF or RF license.
  7. Glossy, slick floor tile. Choose a slip-resistant floor finish, especially for older adults and children.
  8. Paying too much up front. Tie payments to stages such as rough-in passed, waterproofing passed and tile complete. See payment schedules.
  9. Ignoring the unit below. In a condo, a leak becomes your neighbor's problem and possibly your bill.

Bathroom remodel contracts: state notices to look for

In Florida, a contract over $2,500 for a home of up to four units must include the construction lien notice required by section 713.015 and the Homeowners' Construction Recovery Fund notice required by section 489.1425. A contractor who takes more than 10% up front must apply for permits within 30 days and begin work within 90 days after permits issue, unless you agree otherwise in writing (section 489.126). In Texas, the contractor must give you the Property Code section 53.255 "Know Your Rights" disclosure before you sign, a list of subcontractors and suppliers before work starts, and a bills-paid affidavit at final payment; you must hold 10% retainage until 30 days after completion. In both states, a contract signed at home after a sales visit generally carries a 3-day right to cancel. For the full list, see the construction contract checklist and required contract notices.

How to choose a provider

  • Decide refresh, same-layout replacement, layout change, expansion or universal design.
  • Check the home's year built; pre-1978 homes trigger EPA lead-safe rules for paid work disturbing paint.
  • In a condo or HOA, get written alteration rules and approval before design is final.
  • Choose the waterproofing system, valve, fan and fixtures before bidding.
  • Ask each bidder the waterproofing questions and require a flood test in writing.
  • Verify the plumber (Texas plumbing board or Florida DBPR CF/RF) and electrician licenses.
  • Confirm which permits apply and who pulls them.
  • Add blocking for future grab bars and choose slip-resistant floor tile.
  • Make sure the exhaust fan is sized for real airflow and vents outdoors.
  • Tie payments to inspected stages; hold Texas retainage; collect Florida lien releases.
  • Photograph the open walls, membrane and flood test before tile.
  • Do a final punch list walk and keep warranty and inspection records.

Related general and residential contractors guides

General and residential contractors by state and city

Questions people ask

How much does a bathroom remodel cost in Texas?

In the 2025 Cost vs. Value report, a midrange bath remodel (new tub, tile surround, toilet, vanity top, medicine cabinet and tile floor in a 5-by-7-foot room) averaged $23,503 in Houston, $23,121 in Dallas and $20,985 in Austin and San Antonio. An upscale expansion to about 100 square feet averaged $69,157 to $75,005. Universal design remodels averaged $33,502 to $36,984. These are 2025 averages for defined projects; get written bids for your own scope.

How much does a bathroom remodel cost in Florida?

The 2025 Cost vs. Value report put a midrange bath remodel at $25,565 in Miami and $24,594 in Jacksonville, with a South Atlantic regional average of $25,609. Upscale remodels averaged $79,971 in Miami and $78,266 in Jacksonville. The report does not publish separate Tampa or Orlando figures, so use the regional average as a benchmark and compare it against local written bids.

Can I do my own bathroom plumbing in Texas?

Texas Occupations Code section 1301.051 says a property owner does not need a plumbing license to do plumbing in his or her own homestead. That does not remove city permit and inspection requirements, and it does not let you hire an unlicensed person to do the work. If the home is a rental or not your homestead, licensed plumbers must do the work.

What size exhaust fan does a bathroom need?

The Department of Energy's Building America Solution Center says bathroom fans should provide at least 50 cfm for intermittent use or 20 cfm run continuously to meet ASHRAE 62.2 and the International Residential Code. Because ducts reduce airflow, it notes ENERGY STAR recommends a fan rated at least 70 cfm for a 50 cfm intermittent target. Large bathrooms, long duct runs or steam showers may need more. The fan must vent outdoors.

What is a flood test?

A flood test checks a shower's waterproofing before tile goes on. The installer plugs the drain, fills the shower base with water, and leaves it for the time the membrane manufacturer or inspector requires, then checks for any drop in water level or leaks below. It costs little and catches problems while they are still easy to fix. Ask for it in the contract and take photos.

Is a curbless shower worth it?

A curbless shower is easier to use for people with mobility limits and makes a small bathroom feel larger. It costs more than a standard shower because the floor must slope to the drain while the entry stays level, which often means recessing a concrete slab or framing. Waterproofing usually needs to extend beyond the shower. If you plan to age in place, it is often worth it; plan the drain and slab work early.

Do I need to follow ADA rules in my home bathroom?

No. The 2010 ADA Standards apply to public accommodations and some multifamily housing, not to private single-family homes. They are still a useful reference for grab bar heights (33 to 36 inches), toilet seat heights (17 to 19 inches), door widths and shower sizes when someone in the household uses a walker or wheelchair. Adding wall blocking for future grab bars is a low-cost step for any remodel.

Who pays if my condo shower leaks into the unit below?

Under Florida Statutes section 718.111(11)(j), a unit owner is responsible for repair costs not paid by insurance when damage to other parts of the condominium is caused by the owner's (or tenants', guests' or invitees') negligence or failure to follow the declaration or association rules. The exact outcome depends on your declaration, insurance and the facts, so talk to your insurer and, if needed, an attorney.

Can I replace a toilet without a permit?

In Texas, Occupations Code section 1301.551(c) allows cities to skip plumbing permits for replacing water closets, lavatory or kitchen faucets, ballcocks and garbage disposals and for repairing leaks, so a like-for-like toilet swap usually needs no permit. Moving a toilet requires a permit. In Florida, rules vary by local building department, so ask before you start.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration