New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Plumbing

Mold After a Plumbing Leak: How Fast It Grows, Who Must Fix It, and What Insurance Pays in Texas and Florida

Mold can start within a day of a leak. Here is how to dry out fast, when you can clean it yourself, when Texas and Florida require a licensed mold professional, and how insurance and landlords handle it.

Mold can start growing within 24 to 48 hours after a leak, so stop the water, document it and dry everything fast. EPA says most people can clean about 10 square feet themselves. Hired remediation needs a license in Texas at 25 contiguous square feet (TDLR) and in Florida above 10 square feet (DBPR). Insurance usually covers mold from sudden leaks, often with a sublimit, but not from gradual seepage.

Key facts

  • EPA advises drying water-damaged materials within 24 to 48 hours to prevent mold growth.
  • EPA says most people can clean a moldy area of about 10 square feet themselves.
  • Texas does not require a license to remediate mold covering less than 25 contiguous square feet (Occ. Code 1958.102).
  • Florida's definitions of mold assessment and remediation cover growth greater than 10 square feet (Fla. Stat. 468.8411).
  • In Texas, one license holder cannot both assess and remediate the same project (Occ. Code 1958.155).
  • Texas remediators must give the owner a certificate of mold remediation within 10 days of finishing (Occ. Code 1958.154).
  • Florida mold assessors and remediators must carry at least $1 million in liability coverage (Fla. Stat. 468.8421).
  • TDI says mold on items damaged by a covered sudden water loss is covered, but gradual-leak mold usually is not.
  • EPA recommends indoor humidity below 60%, ideally 30% to 50%.

How soon does mold grow after a plumbing leak?

Fast. The EPA says to dry water-damaged areas and items within 24 to 48 hours to prevent mold growth, and that mold often will not grow if wet materials are dried in that window. The Texas Department of Insurance puts it more bluntly: mold can start growing within a day after a leak.

Texas and Florida make the clock run faster. Warm air, high outdoor humidity and air conditioning that cycles off when you leave all keep wet drywall and carpet pad damp longer. A slow leak inside a wall in a Houston or Miami summer can feed mold for weeks before anyone sees a stain.

What mold needs

  • Moisture. This is the one you control. The EPA's core rule is "the key to mold control is moisture control."
  • Food. Drywall paper, wood, carpet backing, ceiling tile, dust and paint.
  • Time and warmth. Normal indoor temperatures are fine for mold.

Where it hides after a plumbing leak

  • Behind and under sink cabinets, especially the cabinet floor and the back panel
  • Inside walls behind showers, toilets, washing machines and fridge ice-maker lines
  • Under vinyl plank, laminate and carpet pad after a slab leak or overflow
  • In ceilings below a bathroom or an attic water heater
  • In the A/C air handler closet when a condensate line backs up, which is common in Florida

If you cannot see it but smell a musty odor, assume moisture first. Find and fix the source before you worry about the mold. See how to find a hidden leak and under-sink and appliance leaks.

What to do in the first 48 hours

  1. Stop the water. Close the fixture valve or the house main. See burst pipe: the first 60 minutes.
  2. Document. Photograph and video the source, the wet areas and damaged items before you move them. TDI says not to throw away damaged items until the adjuster has seen them.
  3. Call your insurer. TDI says hidden water damage usually must be reported within days after you first see it. In Florida, the outside limit to report a new claim is 1 year from the date of loss (Statute 627.70132), but waiting can hurt the claim. See the claim process.
  4. Remove water and start drying. Pull up wet rugs and carpet. Run fans and a dehumidifier. Keep the A/C running. Move wet items to a dry room.
  5. Cut out what cannot be dried. Soaked carpet pad, swollen particleboard and wet insulation rarely dry well. TDI warns against permanent repairs before the insurer sees the damage, so photograph and keep samples.
  6. Hire help if needed. If you cannot dry it yourself, a water mitigation company can bring commercial drying equipment. Get a written scope and daily moisture readings.

Drying is not the same as mold remediation. Water mitigation removes water and dries the structure. Mold remediation removes mold that has already grown. In Texas and Florida, the second one can trigger state licensing rules once the area is large enough.

Can I remove mold myself?

Often, yes, for small areas. The EPA says most people can clean up a moldy area of about 10 square feet (roughly 3 feet by 3 feet) themselves. Bigger areas, or heavy water damage, call for professional methods.

EPA's protective gear list

  • An N-95 respirator that fits properly
  • Long gloves, ideally to mid-forearm (natural rubber, neoprene, nitrile, polyurethane or PVC if you use a cleaner or bleach)
  • Goggles without vent holes

How to clean

  • Scrub hard surfaces with water and detergent, then dry them completely.
  • Throw away porous materials that stay moldy, like ceiling tile, carpet and soaked drywall. EPA says mold can be impossible to fully remove from them.
  • Bleach is not recommended as a routine practice, according to EPA. If you use it, ventilate, and never mix it with ammonia cleaners because toxic fumes form.
  • Remove the mold, do not just kill it. EPA notes dead mold can still cause allergic reactions.

When not to do it yourself

  • The mold covers more than about 10 square feet, or 25 contiguous square feet in Texas, where licensing kicks in for hired work.
  • Mold is inside the HVAC system or ducts.
  • The water was sewage. See sewer backup cleanup.
  • Anyone in the home has asthma, a weakened immune system or severe allergies.
  • You plan to file an insurance claim and need a documented, certified result.

Texas mold licensing: what TDLR requires

Texas regulates mold work under Occupations Code Chapter 1958, run by the Texas Department of Licensing and Regulation (TDLR). The chapter was updated in 2023 and again in 2025 (SB 1255, effective September 1, 2025), so older articles may describe outdated exemptions.

Who needs a license

Section 1958.101 says a person may not do mold assessment without a mold assessment license, or mold remediation without a mold remediation license. "Mold assessment" includes inspections, writing a remediation protocol and collecting or analyzing mold samples. Licenses last two years.

Who does not

  • Small jobs. No license is needed to remediate an area with less than 25 contiguous square feet of mold (1958.102(c)).
  • Owners and tenants. An owner or tenant, or their managing agent or employee, can assess or remediate their own property, unless the area is 25 contiguous square feet or more, or the agent or employee is in the mold business for the public (1958.102(a)).
  • Small landlords. An owner, or the owner's agent or employee, of residential property with fewer than 10 dwelling units does not need a license for that property (1958.102(e)).
  • Plumbers doing plumbing. Diagnosing and repairing plumbing is outside the chapter, as is incidental discovery or emergency containment of mold during that work (1958.002).

Rules that protect you

  • No double-dipping. One license holder may not do both assessment and remediation on the same project, and no one may own both companies on the same project (1958.155).
  • Paperwork before work. The assessor gives you a scope of work analysis, and the remediator gives you a work plan, before remediation starts (1958.151 and 1958.152).
  • State notice. The remediator must notify TDLR at least five days before starting, or by the next business day in a water-damage emergency (1958.153).
  • Certificate of mold remediation. Within 10 days after finishing, you must receive a certificate in which a licensed assessor states the mold was remediated and, if so, that the underlying cause was fixed (1958.154).
  • Photos and records. The remediator keeps before-and-after photos, the contract and invoices for at least three years, and gives you copies of the photos within 10 days (1958.156).
  • When you sell. You must give the buyer copies of every certificate issued for the property in the past five years (1958.154(b)). See selling a house with plumbing issues.

Check a Texas license with the TDLR license search before you sign. TDI also tells policyholders filing a mold claim to make sure the mold professional has a state license and that mold professionals must provide a certificate that the mold was removed.

Florida mold licensing: DBPR and Chapter 468, Part XVI

Florida licenses mold assessors (MRSA) and mold remediators (MRSR) through the Department of Business and Professional Regulation under Statutes 468.84 through 468.8424.

What counts as regulated work

Florida defines mold assessment and mold remediation as work on mold growth of greater than 10 square feet (468.8411). Smaller areas fall outside those definitions. A mold remediator may not do work that needs a construction license under Chapter 489, such as plumbing, unless also licensed under that chapter.

Who is exempt

  • A residential property owner doing assessment or remediation on their own property (468.841)
  • Employees working on property owned, leased or managed by their employer, unless the employer does mold work for the public
  • Licensed contractors under Chapter 489, home inspectors and certain others acting within their licenses, unless they advertise themselves as a "mold assessor" or "mold remediator"

Conflict-of-interest rules

  • A mold assessor may not remediate a structure the assessor's company assessed within the last 12 months, and a remediator may not assess a structure it remediated within the last 12 months (468.8419). A narrow exception applies to certain Division I certified contractors, who may be required to tell you that you have the right to get competitive bids.
  • Assessors may not pay or accept referral fees from remediators.
  • An assessment's result or fee may not depend on its conclusions.
  • Violations are crimes, starting as a second-degree misdemeanor and rising to a third-degree felony for repeat offenses.

Insurance requirements

Florida mold assessors must carry at least $1 million in general liability and errors and omissions coverage, and remediators at least $1 million in general liability that specifically covers mold claims (468.8421). Ask for the certificate of insurance.

Verify a Florida mold license with DBPR's search at myfloridalicense.com.

Texas and Florida mold rules side by side

QuestionTexasFlorida
AgencyTDLRDBPR
LawOccupations Code ch. 1958Statutes 468.84 to 468.8424
Size that triggers licensing for hired remediation25 contiguous square feet or moreGreater than 10 square feet
Homeowner doing own workExempt, but owner exemption does not cover 25+ contiguous sq ft (1958.102(a))Residential owner on own property is exempt
Same company assess and remediate?Not on the same projectNot within 12 months on the same structure (narrow exception)
Proof of completionCertificate of mold remediation within 10 daysNo state certificate in the statute; write a post-remediation assessment by an independent licensed assessor into your contract
Required insuranceSet by TDLR rule$1 million minimum for assessors and remediators

Is mold from a plumbing leak covered by insurance?

It depends on how the water got there and on your policy's mold language. This is general information, not legal advice.

Usually covered

TDI explains that if mold develops on an item damaged by a covered sudden water loss, such as a burst pipe or washer hose, the mold damage on that item is covered.

Usually not covered

  • Mold from a gradual leak or seepage. Most Texas policies exclude gradual leaks, and some forms exclude seepage lasting 14 days or more. See sudden vs gradual leaks.
  • Mold from a flood, because home policies do not cover floods. You need a separate flood policy.
  • Mold cleanup and testing after the damaged item is removed. TDI says most policies do not include it, though your insurer may let you add it.

Mold sublimits

Many policies cap mold, fungi or rot payments at a fixed dollar amount, separate from your dwelling limit. The cap usually appears in an endorsement or on the declarations page under words like "fungi, wet or dry rot, or bacteria." TDI lists mold removal among the common optional endorsements you can buy. Read the declarations page before the adjuster arrives so you know whether the mold part of your claim will hit a cap.

Florida-specific issues

  • Florida policies, including Citizens, may cap non-weather water losses. Citizens' 2018 rule set a $10,000 cap, including $3,000 for emergency mitigation, for policyholders who decline its Managed Repair Program. Mold tied to the leak may fall under the same cap.
  • For Citizens policies, Statute 627.351(6)(kk) puts the burden on you to prove water damage was not caused by flooding.
  • You cannot assign your post-loss benefits to a mitigation or mold company on policies issued on or after January 1, 2023 (627.7152(13)).

How to protect the claim

  • Report quickly and show you dried things promptly. Delay can be argued as the cause of the mold.
  • Get the leak source in writing from a licensed plumber: what failed and when.
  • Keep moisture logs and photos from the drying company.
  • In Texas, keep the certificate of mold remediation. TDI says you will need an inspection showing the mold was removed and the cause was fixed.

How do I test for mold, and do I need to?

If you can see mold, you usually do not need a test. The EPA says sampling is usually unnecessary when mold is visible, and there are no federal limits for mold, so a lab number cannot tell you whether you "pass." The money is better spent finding the leak and removing the damage.

Testing does have uses:

  • Clearance after remediation. EPA says surface sampling by experienced professionals can help confirm an area was cleaned. In Texas, the licensed assessor's sign-off on the certificate of mold remediation serves this role.
  • Hidden mold questions. When there is a musty smell but no visible growth, an assessor may use moisture meters, thermal imaging and sampling to locate it.
  • Disputes. In an insurance or landlord dispute, a licensed assessor's report carries more weight than a home kit.

Be wary of anyone offering a "free mold test" that conveniently ends in a big remediation contract from the same company. In Texas, that company cannot do both on one project. In Florida, an assessor cannot remediate a structure it assessed within 12 months.

Can mold behind walls make me sick?

It can affect some people. The EPA says mold can cause allergic reactions such as sneezing, runny nose, red eyes and skin rash, can trigger asthma attacks in people who have asthma and are allergic to mold, and can irritate the eyes, skin, nose, throat and lungs. Research on other effects is ongoing, and EPA suggests asking a health professional for guidance.

Mold inside a closed wall cavity affects indoor air less than mold on an open surface, but cutting into the wall releases spores. That is why professionals seal the area with plastic sheeting and use negative air pressure during removal.

Should I move out during remediation?

Not always. For a small, contained job, many families stay home. Consider staying elsewhere if the work area is large, if containment blocks a kitchen or the only bathroom, if the HVAC system is involved, or if anyone in the home has asthma, a weakened immune system, is pregnant or is an infant. If the damage came from a covered loss, check whether your policy's loss of use (additional living expense) coverage pays for a temporary stay. In Texas construction-defect cases, temporary housing during repairs can be recoverable under Property Code 27.004(g).

Is my landlord responsible for mold from a plumbing leak?

Usually the landlord must fix the leak, and often the damage, when it affects health or safety. Neither state has a mold-specific tenant statute, so the plumbing repair rules do the work.

  • Texas. Property Code 92.052 requires the landlord to make a diligent effort to repair a condition that materially affects the physical health or safety of an ordinary tenant after the tenant gives notice and is current on rent. Seven days is presumed reasonable (92.056). Give notice in writing and keep a copy. Small Texas landlords with fewer than 10 units can do mold work on their own property without a license, but the 25-square-foot limit for unlicensed hired work still matters. See Texas renters and plumbing repairs.
  • Florida. Statute 83.51 requires the landlord to comply with building, housing and health codes and, where none apply, to keep plumbing in reasonable working order. A tenant may use material noncompliance as a defense for withholding rent only after 7 days' written notice (83.60). See Florida renters and plumbing repairs.

Tenants should report leaks right away. A tenant who hides a leak for weeks can be blamed for the mold that follows. Renters insurance usually covers the tenant's belongings, not the building. Before withholding rent, talk to a local legal aid office.

How much does mold remediation cost?

Fixr's cost guide, updated August 29, 2025, gives a national average of $3,500, with most jobs between $1,500 and $9,000 and a range of about $10 to $30 per square foot. Its figures by location:

AreaFixr range (2025)
Bathroom$500 to $1,500
Crawl space$500 to $2,000
Basement$1,500 to $4,000
Attic$1,500 to $9,000
HVAC system$3,000 to $10,000
Whole houseUp to about $30,000
Testing or inspection billed separately$450 to $800

Those are national numbers. The plumbing repair, drywall, cabinets and flooring are usually extra. In Texas, the required work analysis and work plan give you a written scope you can compare between companies. Compare more costs in the plumbing cost guide.

How to prevent mold after future leaks

  • Know where every shut-off valve is and test them yearly. See the maintenance calendar.
  • Keep indoor humidity below 60%, ideally 30% to 50%, as EPA recommends.
  • Replace rubber washer hoses with braided ones and check them yearly.
  • Put drain pans under water heaters and washers, and leak sensors under sinks, the fridge and the water heater.
  • In Florida, flush the A/C condensate line regularly.
  • Fix slow drips quickly. A cabinet floor that stays damp for weeks is how most under-sink mold starts.

How to choose a provider

  • Stop the water at the fixture valve or house main.
  • Photograph and video the leak source and all wet areas before moving anything.
  • Report the loss to your insurer within days of discovering it.
  • Remove standing water, pull up wet rugs and run fans, A/C and a dehumidifier.
  • Keep samples and photos of anything you must throw away.
  • Have a licensed plumber fix the leak and write down what failed.
  • Measure the moldy area: under 10 sq ft can be DIY with an N-95, gloves and goggles.
  • For larger areas, hire a licensed assessor and a separate licensed remediator.
  • In Texas, get the work analysis, work plan and certificate of mold remediation.
  • In Florida, verify both licenses and insurance at myfloridalicense.com.
  • Read your policy's mold or fungi endorsement and sublimit.
  • Keep all reports for the day you sell the home.

Related plumbing guides

Plumbing by state and city

Questions people ask

Does a mold sublimit apply to my water damage claim?

It can. If your policy has a fungi or mold endorsement, the mold part of the claim (cleanup, removal and testing) may be capped at the endorsement's dollar limit, while the water damage itself is paid under your dwelling coverage. Ask the adjuster to separate the two in the estimate. TDI says most policies do not include mold cleanup after the damaged item is removed unless you added that coverage.

Will bleach kill mold on drywall?

Bleach is not the answer for drywall. EPA does not recommend bleach as routine practice, and mold in porous materials like drywall may be impossible to remove fully, so moldy drywall is usually cut out and replaced. If you clean a hard surface, use detergent and water, dry it completely, and never mix bleach with ammonia-based cleaners.

Do I need a licensed plumber or a mold company first?

Fix the leak first. A licensed plumber stops the source, and in both states repairing plumbing is separate from mold work. Then dry the area. Only if mold has grown over a large area do you need a licensed mold professional: 25 contiguous square feet or more in Texas, or more than 10 square feet in Florida for hired work.

Can the same company test for mold and then remove it?

Not in Texas, where one license holder cannot perform both assessment and remediation on the same project, and one person cannot own both companies on it. In Florida, an assessor cannot remediate a structure its company assessed within the last 12 months, with a narrow exception for some Division I certified contractors who must tell you that you can seek competitive bids.

How long does mold remediation take?

It depends on the size of the area, how much material must be removed and how long drying takes, plus time for rebuilding. Ask for a written schedule in the work plan. In Texas, a licensed remediator must notify TDLR at least five days before starting, or by the next business day in an emergency, so build that into the schedule.

Do I have to disclose past mold when I sell my house?

In Texas, yes for remediation certificates: Occupations Code 1958.154(b) requires a seller to give the buyer copies of every certificate of mold remediation issued for the property in the previous five years. Both states also expect sellers to disclose known material defects. Ask a real estate attorney or your agent about your disclosure form.

Is black mold more dangerous than other mold?

Color does not tell you how risky a mold is. EPA's guidance treats all indoor mold the same way: control moisture, remove the growth and protect yourself while you do it. Focus on how large the area is and who lives in the home, not on color. People with asthma or weak immune systems should avoid the cleanup.

Can mold grow on a slab after a slab leak?

Yes, on what sits on top of the slab: carpet pad, wood flooring, baseboards and the bottom of drywall. Concrete itself is a poor food source, but it holds moisture and keeps materials above it wet. After a slab leak repair, measure moisture in the flooring and walls before reinstalling anything. See our slab leak guide.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration