New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Swimming pool builders and contractors

Is My Pool Leaking? How Do You Test for a Leak, What Does Detection Cost, and Who Pays?

How to tell a leak from evaporation, step-by-step home tests, how pros find leaks, 2025 cost ranges, and the Texas and Florida rules on water bill adjustments, insurance, sinkholes and who may legally make the repair.

Most pools lose about a quarter inch of water a day to evaporation, or 1 to 2 inches a week. If yours loses more, run a bucket test: set a bucket of pool water on a step, mark both levels and wait 24 hours. If the pool drops more than the bucket, you likely have a leak. Leak detection typically costs $100 to $500 (Fixr, 2025).

Key facts

  • Latham (June 2024) and a pool-supply retail expert quoted by Bob Vila (May 2024) both put average pool evaporation at about 1/4 inch per day.
  • Fixr (updated Jan. 31, 2025): leak detection $100 to $500; typical repair $500 to $1,500, average about $1,000.
  • Fixr (2025): skimmer leak $100 to $250; main drain line $500 to $1,500; pool light $75 to $300 per light.
  • SAWS adjusts part of leak-caused water use for up to two months if you request it within 60 days of the repair; pool supply lines, faulty refill devices and cracked walls or linings qualify.
  • Houston's December 13, 2023 ordinance changes give 100 percent leak adjustment for repairs within 30 days of the leak starting, 75 percent within 60 days and 50 percent after.
  • TDI: most homeowners policies cover sudden and accidental water damage but usually not gradual leaks.
  • Fla. Stat. 627.706 lets insurers limit sinkhole and catastrophic ground cover collapse coverage to the principal building.
  • Florida Building Code, Residential R4501.21.4 requires a hydrostatic relief device in areas of anticipated water table, except plastic liner pools.
  • Florida pool/spa servicing contractors may repair perimeter and filter piping and drain pools for repair, under s. 489.105; Texas has no state pool contractor license.

Is my pool leaking or just evaporating?

Every outdoor pool loses water to the air. The question is how much. Two pool industry sources put typical evaporation at about a quarter inch per day. Latham's editorial team (June 2024) says pools lose approximately 1/4 inch per day on average and that a 400-square-foot pool may lose up to 10,000 gallons a year. A Bob Vila article (May 2024) quotes a pool-supply retail expert giving the same quarter-inch daily average and says most owners only need to add 1 to 2 inches per week. Losing more than a couple of inches a week with no clear cause points to a leak.

Those are averages, not limits. Evaporation rises with:

  • Heat and sun. A July afternoon in San Antonio or Austin pulls water off a pool faster than a cloudy day in Jacksonville.
  • Low humidity. Dry air drives evaporation. West and Central Texas often have drier air than coastal Houston or South Florida.
  • Wind. An open, windy lot loses more than a screened Florida lanai.
  • Warm water in cool air. Latham notes that a heated pool on a cool, dry fall or winter night can lose a quarter inch or more a day, and levels can drop 1 to 3 inches overnight in some conditions.
  • Splash-out and backwashing. A pool party, kids cannonballing, or a long backwash can drop the level by an inch or more in a day.
  • Water features. Waterfalls, sheer descents, spillover spas and fountains spray water into the air and increase evaporation.

Because the "normal" number changes with the weather, the most reliable home test compares your pool to a bucket of water sitting in the same conditions. That is the bucket test.

What is the bucket test and how do I do it?

The bucket test puts a container of pool water in the pool so it sees the same sun, wind, temperature and humidity. If the pool drops more than the bucket, the extra loss is a leak.

  1. Bring the pool to its normal level. Turn off any auto-fill device, or close the valve feeding it. An auto-fill will hide a leak by topping the pool off.
  2. Set a 5-gallon bucket on the first or second step so it sits partly in the pool water. Add bricks or rocks inside if it floats or tips.
  3. Fill the bucket with pool water until the water inside matches the pool's level outside.
  4. Mark both levels. Mark the water line inside the bucket and the pool's water line on the outside of the bucket with a marker or tape.
  5. Turn the pump off and wait 24 hours. Do not swim, add water or backwash.
  6. Compare. If both dropped by the same amount, the loss is evaporation. If the pool (outside mark) dropped more than the bucket (inside mark), you likely have a leak. Write down both drops in inches.
  7. Repeat for 24 hours with the pump running on its normal schedule. Swim University (updated April 2026) explains that a bigger loss with the pump running points to a leak in the filter system or plumbing. That fits how pools work: when the pump runs, the return side is under pressure, so a crack there pushes out more water. A loss that is about the same either way more often points to the shell, a fitting or a light.

If it rains during the test, start over. Bob Vila's guide gives the same advice. During Florida's summer rainy season, look for a dry 24-hour window or run the test overnight.

How to read the result

ResultWhat it usually meansNext step
Pool and bucket drop the sameEvaporationReduce evaporation (cover, fewer water features at night)
Pool drops more, pump on and off alikeLeak in the shell, liner, a fitting, light or suction lineLevel stop test, dye test, call for leak detection
Pool drops more only with pump runningLeak on the pressure side: filter, valves, heater, return linesInspect the equipment pad; call for pressure testing
Pool drops a lot (an inch or more a day beyond the bucket)Significant leakCall a leak detection professional soon; watch for soggy ground

What other home tests can narrow down the leak?

The level stop test

Turn off the auto-fill and let the pool drop without refilling (pump off). Many leaks stop draining when the water falls below the leak point. If the level stops just below the skimmer opening, suspect the skimmer. If it stops at the pool light, suspect the light niche or conduit. If it stops at a return jet, suspect that fitting or line. If it keeps dropping to the floor, the leak may be at the main drain or in the floor. Do not let the pool drain far in areas with high groundwater; see the warning below.

The dye test

Swim University describes it this way: turn off the pump and features so the water is still. Squeeze a small amount of leak-detection dye (or food coloring) close to the wall near a suspected spot without disturbing the water. If there is a leak, the dye gets pulled toward the crack or fitting. Mark the spot with waterproof tape. For floor leaks, put on goggles and swim down slowly. Good dye-test spots: around skimmer throats, light niches, return fittings, step corners, tile lines and visible cracks.

Check the equipment pad

With the pump running, look and feel for drips, damp gravel or white crusty deposits around the pump lid, unions, valves, filter, heater and chlorinator. Bob Vila's guide notes that water coming from the backwash line when the filter is not backwashing can mean a worn multiport valve. A small drip at the pad can add up to many gallons a day.

Walk the yard

Look for soggy spots, grass that stays greener than the rest of the lawn, sinking pavers or deck sections, and water running toward the street or gutter when no one is watering. Those can mark an underground line leak.

What are the signs of a pool leak?

  • The level drops more than about 1 to 2 inches a week without heavy use or a heat wave.
  • The auto-fill runs more often, or your water bill jumps.
  • Water loss continues even when humid or the pool is covered.
  • Soft or soggy ground, sinking deck, new cracks in the deck, or puddles that do not dry.
  • A sudden increase in chemical use, or water chemistry that will not stay balanced (fresh fill water keeps diluting it).
  • Algae that keeps coming back, because fresh water brings in new nutrients and dilutes sanitizer.
  • Air bubbles in the return jets or a pump that loses prime, which can mean a suction-side leak drawing in air.
  • Cracks or gaps in the plaster, tile line or skimmer, or tears and wrinkles in a vinyl liner.

These signs come from Bob Vila's 2024 guidance and common service practice. Any one of them is worth a bucket test.

Where do pools usually leak?

LocationWhy it leaksClues
SkimmerThe plastic skimmer body meets the concrete wall; movement and settling crack the joint or the skimmer throatLevel stops just below the skimmer; dye pulls into the skimmer seam
Underground plumbingCracked pipe or failed glue joints from soil movement, roots, freezing or ageLoss larger with pump on (return lines) or air in the system (suction lines); soggy yard spots
Light nicheWorn cord seal or conduit, cracked nicheLevel stops at the light; dye pulls toward the conduit
Return fittings and jetsFittings loosen or the seal around them failsDye pulls in around a return
Main drainCracked drain body or linePool keeps dropping to the floor in the level stop test
Equipment padPump seals, unions, O-rings, filter tank, valves, heaterDrips, wet gravel or crusty deposits at the pad
Shell cracksStructural cracks in concrete through the plasterVisible crack wide enough to take a dime, dye pulls in
Vinyl linerPunctures, tears, failing seams, especially near steps and fittingsVisible holes; dye pulls in
Tile line and bond beamDeck pushing on the coping, failed expansion joint, beam cracksGaps behind the tile, loose coping, water loss near the top

Swim University names the filter system area, underground plumbing, skimmer junctions on concrete pools, and stairs and fittings on vinyl pools as the most common trouble spots. In The Swim's guidance on concrete pools notes that small crazing cracks in plaster are usually not serious, but a crack wide enough to take a dime may go through the shell and should be dye tested.

For more on crack types, see our guide to pool cracks and structural repair.

How do professionals find pool leaks?

A leak detection visit usually combines several methods. Ask what is included before you book.

  • Visual and dye inspection. A technician, often in the water with a mask, dye-tests every fitting, light, skimmer, step and crack.
  • Pressure testing. The tech plugs each plumbing line at the pool end and pressurizes it with air or water. If a line cannot hold pressure, it has a leak. Swim University says an underground plumbing leak in an inground pool needs a pool professional to pressure test the lines.
  • Acoustic or ultrasonic listening. Fixr notes that some technicians use ultrasonic equipment. Listening devices on the deck or in the water pick up the sound of water or air escaping from a pressurized line, which helps pinpoint where to dig.
  • Line tracing. Once a line fails, the tech traces its path so the repair dig is as small as possible.
  • Equipment inspection. Pump seals, valves, filter and heater are checked for drips and air leaks.

You should get a written report showing which lines passed and failed, which fittings leaked, and photos. That report helps with repair quotes, your water utility's leak adjustment request and any insurance conversation.

How much does pool leak detection and repair cost?

We use two named, dated national cost guides. Texas and Florida prices vary by city and by how much digging a repair needs, so treat these as starting points and get written quotes.

ItemCost rangeSource
Leak detection visit$100 to $500Fixr (updated Jan. 31, 2025); Bob Vila (May 2024) gives the same range
Detection labor by the hour$75 to $125 per hourFixr (2025); Bob Vila (2024)
Typical leak repair overall$500 to $1,500 (national average about $1,000)Fixr (2025)
Skimmer leak$100 to $250Fixr (2025)
Pool light leak$75 to $300 per lightFixr (2025)
Main drain line$500 to $1,500Fixr (2025)
Broken pipe / plumbing$500 to $1,500Fixr (2025)
Pump leak$500 to $1,500Fixr (2025)
Hole$100 to $500Fixr (2025)
Crack$325 to $5,000 (about $65 to $75 per linear foot)Fixr (2025)
Liner repair$100 to $2,750Fixr (2025)
Above-ground pool leak$100 to $1,000Fixr (2025)
Inground pool leak$100 to $5,000Fixr (2025)

Fixr's high end of $5,000 is a full replaster of an inground concrete pool. Bob Vila's May 2024 repair guide puts general leak repair at $10 to $3,500. What drives the price:

  • Digging. A plumbing leak under a paver or concrete deck means cutting and replacing decking. Ask whether deck patching is in the quote.
  • Access. Leaks under a screen enclosure footing, a patio cover or landscaping cost more to reach.
  • Re-plumbing versus spot repair. Old, brittle lines sometimes need a whole run replaced rather than one joint.
  • Draining. Repairs that need the pool lowered or drained add labor, water and refill chemicals, and in Florida they add groundwater risk.

For broader repair and remodel pricing, see our guides to pool remodeling and resurfacing.

How are pool leaks repaired?

Vinyl liner holes

Swim University describes three options that work wet or dry: waterproof tape for small leaks (cheap but can peel), peel-and-stick vinyl patches for small tears, and vinyl patch kits for larger holes. Patches near steps and fittings are under more strain and may not last. An old, thin liner with many patches is often near replacement. Swim University's advice: do not drain your pool to fix a liner leak.

Skimmer leaks

A crack where the skimmer meets the wall is often sealed with pool putty or a flexible sealant made for underwater use. A cracked skimmer body or throat may need a skimmer repair insert, or cutting out the deck around it and replacing the skimmer, which costs much more because of the concrete and tile work.

Fittings, returns and lights

Leaking return fittings can be resealed or replaced. Light niche leaks usually need a new cord seal or conduit plug, sometimes a niche repair. In both Texas and Florida, work on the light's electrical circuit has its own licensing rules (see below).

Underground plumbing

Once a line fails a pressure test and the leak is pinpointed, the crew digs (or cuts the deck), cuts out the damaged section and splices in new pipe. If several joints are failing, re-running the line may be the better long-term fix.

Cracks in concrete shells

Surface plaster cracks may be patched. Cracks through the shell need diagnosis first; options include epoxy or polyurethane injection, stapling, or tearing out and rebuilding a section, often followed by resurfacing. See our cracks guide.

Can a pool leak damage my house foundation or yard?

It can. Water leaking out of a pool for weeks does not just vanish. It soaks the soil around the pool, under the deck and sometimes toward the house.

Texas: expansive clay

Vertisols are clay-rich soils that shrink when dry and swell when wet. The University of Idaho's soil science program, citing USDA-NRCS, says the shrink-swell action creates serious engineering problems and that in the U.S. Vertisols occur primarily in Texas. A steady leak can wet one side of a slab or deck while the rest stays dry, which encourages uneven movement. That can crack decks, tilt coping and, in bad cases, affect nearby foundations. If you see new cracks in the house near the pool, door frames that stick, or a deck that has dropped, fix the leak first and then have a structural engineer or foundation specialist evaluate.

Florida: leaks, settlement and sinkholes

Florida homeowners often wonder whether a depression near the pool is a sinkhole. The Florida Geological Survey (FGS, part of the Florida Department of Environmental Protection) says sinkholes form when Florida's limestone dissolves and the sediments above collapse into the voids. It also warns that other causes can mimic sinkhole activity, including broken sewer or septic lines, poorly compacted soil, buried debris and clay or organic layers. A leaking pool line washing soil away can do the same. FGS does not inspect possible sinkholes; it points homeowners to a certified home inspector or foundation specialist and runs a Sinkhole Helpline at 850-245-2118. If there is any risk of physical harm, call local law enforcement.

Do not drain the pool to "find" the leak

Emptying an inground pool to look for a leak can create a bigger problem. Where groundwater is high, which includes much of coastal and South Florida and low areas along the Texas coast, water pressure under an empty pool can crack the shell or lift it. The Florida Building Code, Residential (R4501.21.4) requires an approved hydrostatic relief device in areas of anticipated water table, except plastic liner pools. Leave draining decisions to a licensed professional who checks the groundwater level and the hydrostatic valve first.

Why is my water bill so high, and can I get a utility leak adjustment for a pool leak?

A pool with an auto-fill can hide a leak for months. The only sign may be a water bill that climbs. In many Texas and Florida cities, you also pay wastewater charges based on water use, so a leak can raise both parts of the bill.

Many utilities offer a leak adjustment once you fix the leak and show proof. Policies differ a lot. Here is what we confirmed:

UtilityWhat its policy says
San Antonio Water System (SAWS)SAWS says it has no legal obligation to grant an adjustment but will when conditions are met. Request within 60 days of the repair with the leak type, location, repair description and date (receipts optional). SAWS adjusts a portion of leak-caused use for up to two months. Its eligible pool leaks include a supply line, a faulty refill mechanism, or a broken or cracked lining or wall. Review can take up to 30 days.
City of Houston (Houston Public Works)Ordinance changes approved December 13, 2023 set leak adjustments at 100 percent for customers who repair within 30 days after the leak began, 75 percent within 60 days and the standard 50 percent after that, with a 100 percent adjustment of excess wastewater charges. The city's announcement also described removing the two-per-year limit.
Austin Water, Dallas Water Utilities, JEA (Jacksonville), Miami-Dade Water and Sewer, Tampa, Orlando Utilities CommissionWe could not load current leak adjustment terms for these utilities. Call billing or check the utility's website before you repair, and ask what proof they need.

How to document a pool leak for an adjustment

  • Photos of the meter before and after the repair, and of the leak itself.
  • Your bucket test numbers with dates.
  • The leak detection report and the repair invoice showing the date and location of the repair.
  • Your past 12 months of bills, so the utility can compare normal use.

Filling or topping off a pool is not a leak, so do not expect an adjustment for that water; ask your utility how it treats pool fills. During drought stages, filling may also be restricted. See our guide to drought restrictions and filling pools.

Does homeowners insurance cover a pool leak?

Often only in part, and sometimes not at all. This is general information; your policy wording controls.

  • Sudden versus gradual. The Texas Department of Insurance (TDI) says most homeowners and renters policies cover sudden and accidental water damage, but usually will not cover damage from gradual leaks. A pool that slowly loses water for months is usually treated as a gradual leak or as wear and tear.
  • The leak itself versus the damage it caused. Policies commonly treat the worn part (an old pipe, a tired liner) as maintenance. Some policies may help with tearing out and replacing deck or other covered property to reach a covered leak. Ask your agent whether your policy has that kind of "tear-out" language.
  • Florida sinkhole and ground collapse. Under Fla. Stat. 627.706, every Florida property insurer must cover catastrophic ground cover collapse, which requires an abrupt collapse, a visible depression, structural damage to the covered building and the structure being condemned and ordered vacated. Settling or cracking alone does not count. Broader sinkhole coverage is optional for an extra premium, and insurers may limit both coverages to the principal building. That means a pool, deck or screen enclosure may not be covered even when sinkhole coverage is bought. Read your declarations page.

Need help with a claim dispute? In Texas, call the TDI consumer help line at 800-252-3439. In Florida, the Department of Financial Services Division of Consumer Services handles insurance questions; its insurance assistance line listed on the consumer page is (850) 413-3089. For a large or disputed claim, consider a licensed public adjuster or an attorney. See our guide to pool insurance and liability.

Who can legally repair pool leaks in Florida and Texas?

Florida

Florida licenses pool work under Fla. Stat. 489.105. A swimming pool/spa servicing contractor may repair and service any pool, replace existing equipment, install new equipment, refinish interiors, repair perimeter and filter piping, and substantially or completely drain a pool for repair or renovation, but may not build a new pool. Residential and commercial pool/spa contractors may build and repair pools. None of the three pool categories may make direct connections to a sanitary sewer or to potable water lines. A Florida plumbing contractor may install swimming pool piping without an extra local license.

Routine cleaning that does not affect structural integrity does not need a license, but leak repairs to plumbing, shells and equipment generally fall inside the licensed scopes. Florida DBPR says certified pool/spa license numbers start with CP and registered ones with RP. Check any license at DBPR's lookup at myfloridalicense.com. Contracting without a required license is a first-degree misdemeanor, and a felony on a repeat offense or during a declared state of emergency, which matters after hurricanes.

Texas

Texas has no statewide pool builder or pool repair license; TDLR's list of licensed programs does not include one. Cities still require permits for some work, and other trades are licensed. Electrical work, including pool lights and equipment wiring, must be done by a TDLR-licensed electrician working through a licensed electrical contractor, or for limited pool equipment hookups by a licensed residential appliance installer, unless an exemption applies. Ask your city's permitting office whether a plumbing or electrical permit is needed for the repair. See our Texas pool builder license guide and Florida pool contractor license guide.

Buying or selling a home with a pool: leak checks

A leak that the seller's auto-fill quietly hides can become the buyer's problem. Before closing:

  • Ask the seller for 12 months of water bills and any leak repair records.
  • Ask whether the pool has an auto-fill. If it does, ask to shut it off for a 24 to 48 hour bucket test during the option or inspection period.
  • Hire a pool inspector, and consider a leak detection test if the bills or inspection raise questions.
  • Ask the seller in writing about known leaks, past leak repairs and any ground settling near the pool, and keep the answers with your closing papers.

More in our guide to buying a home with a pool.

How can I prevent pool leaks?

  • Keep water chemistry balanced. Corrosive, low-pH water attacks plaster, grout and metal parts over time. See our chemistry guide.
  • Protect plumbing from freezes in Texas. Keep the pump running or follow your equipment maker's freeze guidance during hard freezes, and protect exposed pipes. See our freeze damage guide.
  • Maintain the deck expansion joint. In The Swim notes that an uncaulked or failing joint lets the deck push into the pool, loosening coping or breaking the beam. Re-caulk when the sealant cracks.
  • Manage drainage. Keep gutters and yard drainage from dumping water next to the pool shell, especially on clay.
  • Watch the auto-fill. Some owners add a simple water meter on the fill line so they can see how much water the pool takes each week.
  • Inspect the equipment pad monthly for drips and white deposits.
  • Do not let a vinyl liner get too low or sit in sun-baked, unbalanced water.

How to choose a provider

  • Turn off the auto-fill and note the water level on the skimmer face with tape.
  • Run a 24-hour bucket test with the pump off, then 24 hours with the pump on.
  • Do a level stop test and note where the water stops.
  • Inspect the equipment pad for drips, wet gravel and crusty deposits.
  • Walk the yard for soggy spots, sinking pavers or new deck cracks.
  • Dye-test the skimmer, lights, returns, steps and any visible cracks.
  • Book a leak detection visit and ask for a written report of every line and fitting tested.
  • Call your water utility before repairing to learn its leak adjustment rules and deadline.
  • In Florida, confirm the repair company's CP or RP license on DBPR's lookup.
  • Keep the detection report, invoices and meter photos for the utility and your insurer.
  • Do not drain the pool unless a licensed pro has checked groundwater and the hydrostatic valve.
  • After the repair, repeat the bucket test to confirm the leak is gone.

Related swimming pool builders and contractors guides

Swimming pool builders and contractors by state and city

Questions people ask

How much water loss per day is normal for a pool?

About a quarter inch per day is a common average, according to Latham (2024) and a pool-supply retail expert quoted by Bob Vila (2024). Hot, dry, windy weather can push it higher, and heated pools in cool weather can lose more. Most owners add 1 to 2 inches a week. If you are losing more than a couple of inches a week, or the pool drops more than a bucket of water beside it, test for a leak.

What is the bucket test?

It compares the pool with a bucket of pool water set on a step. Fill the bucket to the pool's level, mark both levels, turn off the auto-fill and wait 24 hours without swimming or adding water. If the pool drops more than the bucket, you likely have a leak. Repeat with the pump running: a bigger loss with the pump on points to the filter, equipment or return lines.

How much does pool leak detection cost?

Fixr (updated January 31, 2025) and Bob Vila (May 2024) both put a leak detection visit at about $100 to $500, or $75 to $125 per hour. Fixr puts typical repairs at $500 to $1,500, with skimmer fixes around $100 to $250 and plumbing line repairs around $500 to $1,500. Deck demolition, access problems and draining can add a lot. Get a written quote.

How are underground pool plumbing leaks found?

A technician plugs each line and pressure tests it with air or water. A line that will not hold pressure is leaking. Then the tech uses listening or ultrasonic equipment to hear escaping water or air and traces the line to pinpoint where to dig. Ask for a written report listing every line tested and its result.

Can a pool leak damage my house foundation?

It can, especially on Texas shrink-swell clay, where a constant leak wets the soil unevenly and can lead to deck cracks and movement. In Florida, water from a leaking line can wash away soil and create depressions that look like sinkholes. Fix the leak first, then have a structural engineer or foundation specialist look at any new cracks in the house or deck.

Does homeowners insurance cover a pool leak?

Sometimes, in part. TDI says most policies cover sudden and accidental water damage but usually not damage from gradual leaks. A slow, months-long pool leak is often excluded as gradual or wear and tear. In Florida, sinkhole and ground collapse coverage under s. 627.706 may be limited to the main building, so the pool may be left out. Read your policy and ask your agent in writing.

Can I get a water bill adjustment for a pool leak?

Often, yes. SAWS in San Antonio lists pool supply lines, faulty refill devices and cracked walls or linings as eligible leaks and adjusts part of the excess for up to two months if you apply within 60 days of the repair. Houston's December 2023 rules give up to 100 percent adjustment if you repair within 30 days of the leak starting. Other utilities vary, so call before you repair.

Should I drain my pool to find a leak?

No. Draining rarely helps find a leak and can damage the pool. In high-groundwater areas, common in Florida and along the Texas coast, an empty pool can crack or lift. Use the bucket, level stop and dye tests, then call a professional who can pressure test lines with the water in. If draining is needed for a repair, a licensed pro should check the groundwater and hydrostatic valve first.

Who repairs pool leaks in Florida?

A licensed Florida pool/spa contractor: a swimming pool/spa servicing contractor, or a residential or commercial pool/spa contractor, under s. 489.105. A licensed plumbing contractor may also work on pool piping. Pool contractors may not connect to potable water or sewer lines. Look for a CP or RP license number and confirm it on DBPR's license lookup at myfloridalicense.com.

Do I need a license to repair pool leaks in Texas?

Texas has no state pool contractor license, so a pool company can do most leak repairs without a state pool license. Electrical work on lights or equipment needs a TDLR-licensed electrician or, for limited pool equipment hookups, a licensed residential appliance installer. Some cities need permits for plumbing or electrical repairs, so ask your city's permitting office.

Why does my pool lose more water with the pump running?

When the pump runs, the return side of the system is under pressure, so a crack in a return line, filter, heater, valve or union pushes water out. With the pump off, that leak may stop. Swim University's version of the bucket test uses this: if the pool drops more with the pump on than off, focus on the equipment pad and return plumbing.

Can a pool leak cause mosquitoes or code problems?

Standing water from a leak can pool in low spots of the yard and become mosquito habitat, and a pool that drops low and turns green can draw code complaints. Fix the leak, keep the water level and chemistry normal, and see our guide to green pools for the cleanup steps.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration