New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Swimming pool builders and contractors

How Much Does a Pool Remodel Cost, and What Can You Change on an Existing Pool?

A practical guide to remodeling an older pool in Texas or Florida: dated cost ranges, what can and cannot be added to an existing shell, when a permit is needed, and which safety rules a remodel can trigger.

Fixr's January 2025 cost guide puts a typical pool remodel at $10,000 to $20,000, with a national average of $15,000, a low end near $2,500 for a single feature and a high end near $150,000 for reshaping a large pool with a new deck and enclosure. Most remodels that touch structure, plumbing, electrical work, decks or barriers need a permit. In Texas cities that regulate pools, the state-adopted pool code covers alterations and repairs. In Florida, the building department decides what must be brought up to current code.

Key facts

  • Fixr (updated January 31, 2025): pool remodeling costs $10,000 to $20,000, national average $15,000; low end $2,500, high end $150,000.
  • Fixr (2025) resurfacing ranges: plaster $4,000 to $10,000; aggregate $6,500 to $13,000; tile $20,000 to $30,000.
  • Fixr (2025) lists a spa area addition at $6,500 to $15,000 and a pool light at $450 to $1,200 installed.
  • Fixr's pool deck guide (updated January 31, 2025) gives materials-only prices of $6 to $10 per sq ft for concrete and $15 to $30 for stamped concrete, with coping around $40 to $50 per linear foot.
  • Texas Local Government Code 214.103 makes the International Swimming Pool and Spa Code apply to all construction, alteration, remodeling, enlargement and repair of pools in cities that regulate pools.
  • Florida's pool safety law, chapter 515, states the Legislature's intent that all new residential pools have at least one safety feature; a pool must meet it to pass final inspection.
  • Florida Building Code, Building section 105.1 requires a permit to alter or repair a structure and to install or replace regulated electrical, gas, mechanical or plumbing systems.
  • Since September 29, 2025, federal rule 10 CFR 431.485 requires new pool pump motors of 1.15 to 5 total horsepower to be variable-speed motors.
  • Every pool drain cover sold in the U.S. must meet the federal standard; the current rule, 16 CFR 1450.3, uses ANSI/APSP/ICC-16 2017.

How much does it cost to remodel a pool in 2025 and 2026?

The most-cited dated source for remodel pricing is Fixr's pool remodeling cost guide, last updated January 31, 2025. It puts the national range at $10,000 to $20,000, with a national average of $15,000. Fixr's example of a typical job is resurfacing a 12 by 24 foot concrete pool and updating a 300 square foot deck. Its low-end example is about $2,500 to add a fountain. Its high-end example is about $150,000 to change the shape of a 20 by 40 foot concrete pool, add water features, and install a new deck and enclosure.

These are national numbers, not Texas or Florida quotes. Labor rates, permit fees, soil conditions and how busy local crews are all move the price. Use the ranges below to judge whether a bid is in the normal zone, then compare at least three written bids that list the same scope.

Fixr 2025 benchmarkCost
National average remodel$15,000
Typical range$10,000 to $20,000
Low-end example (add a fountain)$2,500
High-end example (reshape, features, deck, enclosure)$150,000
Above-ground pool remodel$200 to $30,000
In-ground pool remodel$2,500 to $150,000

Fixr also splits its $15,000 average into about $9,000 of materials and $6,000 of labor, and says small jobs billed by the hour run about $40 to $200 per hour. Treat that split as a rough guide. On a resurfacing job, labor is often the bigger share. On an equipment swap, the equipment itself usually is.

Cost by pool size

Fixr's size table shows how wide the spread gets. The low end of each row is a single small fix. The high end is a full makeover.

Pool volumeRemodel cost range (Fixr 2025)
10,000 gallons$1,500 to $37,000
15,000 gallons$3,500 to $50,000
20,000 gallons$8,000 to $70,000
25,000 gallons$15,000 to $100,000
30,000 gallons$25,000 to $150,000

If you do not know your volume, your pool service company or the original permit file usually lists it. A common backyard pool of about 15 by 30 feet with an average depth of 5 feet holds roughly 17,000 gallons (length x width x average depth x 7.5).

What does each remodel project cost?

Most remodels are a bundle of smaller projects. Pricing each one helps you decide what to do now and what can wait. All figures below are from Fixr's January 2025 remodeling guide unless noted.

Surface and finish work

ProjectCost rangeNotes
Paint the pool$1,400 to $2,500Up to about 10 gallons; epoxy paints and primer cost more
Resurface with plaster$4,000 to $10,000Classic white or colored plaster
Resurface with aggregate (pebble or quartz)$6,500 to $13,000Rougher texture, usually longer life than plain plaster
Fiberglass resurfacing$7,500 to $15,000Gelcoat refinish on a fiberglass shell
Concrete resurfacing$10,000 to $20,000Fixr's category for heavier concrete surface work
Full tile interior$20,000 to $30,000Most expensive finish
Replace waterline tile$3,000 to $50,000Fixr's tile replacement range; full tile interiors drive the top
Regrouting$5,000 to $15,000
Replace coping$3,000 to $20,000Fixr's deck guide prices coping at about $40 to $50 per linear foot
Replace vinyl liner$1,000 to $10,000Vinyl pools only

For a deeper look at surfaces, see our pool resurfacing guide.

Equipment replacements

ItemCost range (Fixr 2025)
Filter$250 to $1,500
Light$550 to $1,700
Pump$700 to $1,300
Skimmer$1,500 to $3,000
Heater$2,525 to $5,550
Plumbing$1,000 to $10,000

Pump prices deserve a note. Since September 29, 2025, federal rule 10 CFR 431.485 requires new pool pump motors of 1.15 to 5 total horsepower to be variable-speed motors, and smaller motors from 0.5 to under 1.15 horsepower follow on September 28, 2027. If your remodel includes a new pump or motor, plan on a variable-speed unit. Our variable-speed pump guide explains the rule.

Additions

AdditionInstalled cost (Fixr 2025)
Light$450 to $1,200
Diving board$500 to $1,000
Slide$1,000 to $10,000
Cover$2,700 to $3,700
Fence$3,000 to $10,000
Fire bowls$4,000 to $8,000
Grotto$5,000 to $10,000
Spa area$6,500 to $15,000
Enclosure$10,000 to $30,000
Fountain or waterfall$200 to $15,000

Conversions and structural changes

ProjectCost range (Fixr 2025)
Chlorine to saltwater$600 to $2,500
Saltwater back to chlorine$500 to $3,000
Add heating$1,000 to $9,000
Deep pool to shallow$3,500 to $7,000
Expand a pool$20,000 to $70,000
Reshape a pool$50,000 to $100,000
Vinyl to fiberglass$50,000 to $70,000
Vinyl to concrete$50,000 to $85,000
Fiberglass to concrete$50,000 to $100,000

Fixr's deep-to-shallow figure is for a basic conversion. Raising a floor several feet is structural work. Get an engineer or the original builder involved, because it changes drainage, the main drain location and sometimes the hydrostatic relief system.

Can you add a tanning ledge or baja shelf to an existing pool?

Usually yes, on a concrete (gunite or shotcrete) pool. A tanning ledge, also called a baja shelf or sun shelf, is a wide, shallow area, often 6 to 12 inches deep, where people can sit or lounge in the water. On an existing concrete pool, the builder has two basic options:

  • Build inward. Form and shoot new concrete inside the current shell, usually at the shallow end. This shrinks the swimming area but avoids digging. It is the more common route.
  • Build outward. Cut the existing wall and deck, dig, and add a new section. This keeps the swimming area but is closer to an expansion in cost and permits.

Either way, the new concrete has to bond to the old shell, the surface has to be redone so the finish matches, and steps or benches may need to move. Most builders schedule a ledge with a full resurfacing for that reason.

Fiberglass pools are different. The shell is a single molded piece, so you generally cannot add a molded ledge. Some owners add a freestanding ledge or bench product instead. Vinyl pools can get a ledge only by changing the wall structure and buying a new custom liner.

Fixr does not price tanning ledges as a separate line. Ask bidders to break the ledge out from the resurfacing so you can compare. Also ask how they will tie new steel into old steel and how the electrical bonding grid will be extended, because new concrete in the water is part of the bonded pool shell. Our bonding guide explains why that matters.

Can you add a spa to an existing pool?

Yes. Fixr's 2025 guide prices a spa area addition at $6,500 to $15,000. Real-world costs climb past that when the spa is raised, tiled, or built with a spillover into the pool. There are three common ways to do it:

OptionHow it worksMain trade-offs
Attached concrete spaA new spa shell built at the pool edge, often spilling into the poolMost integrated look; needs digging, steel, plumbing, a heater and new electrical
Fiberglass spa insertA molded spa set next to or partly into the pool deckFaster; fewer shapes
Stand-alone hot tubA portable or built-in tub on the deckCheapest and simplest; separate equipment and cover

An attached spa usually needs its own suction outlets, return lines and valves, plus heat. That often means a bigger heater, a gas line or a heat pump, and new controls. Expect a building permit, an electrical permit and, if gas is added, a gas permit. Under both Texas and Florida pool safety laws, a hot tub or spa counts as part of the pool for barrier purposes: Florida chapter 515 includes hot tubs and nonportable spas over 24 inches deep, and Texas Health and Safety Code chapter 757 (for apartment and HOA pools) covers hot tubs and spas over 18 inches deep. Our hot tubs and spas guide covers spa-only choices.

Can you make a pool shallower or remove the deep end?

Yes, on most concrete pools. Fixr's 2025 range for converting a deep pool to a shallow one is $3,500 to $7,000, though that assumes a simple fill. The usual method is to drain the pool, place compacted fill or a new structural floor in the deep end, add steel where needed, pour a new floor, and resurface the whole pool.

Why owners do it:

  • The diving board is gone and the deep end is wasted space.
  • Kids, grandparents or physical therapy need standing depth.
  • Insurers sometimes ask about diving boards and deep ends. See our pool insurance guide.

What to ask before you agree:

  • Where will the main drain go, and will the new drain cover meet the federal standard? Every drain cover sold in the U.S. must meet the standard set under 15 U.S.C. 8003, now ANSI/APSP/ICC-16 2017 under 16 CFR 1450.3.
  • How will the new floor tie into the old walls so it does not crack along the joint?
  • Does the job need an engineer's letter? Many building departments want one for structural changes.
  • Will the hydrostatic relief valve still work? In high water-table areas, Florida Building Code R4501.21.4 requires an approved hydrostatic relief device on pools (vinyl liner pools excepted).

Fiberglass shells generally cannot be made shallower. Vinyl pools can, but the wall panels, floor shape and liner all change, so the cost comes close to a new vinyl pool.

How much does new pool decking cost, and which material stays cool?

Fixr's pool deck guide (updated January 31, 2025) puts a concrete deck around a 12 by 24 foot pool, with ground leveling, at $6,750 to $8,000, average $7,500. Its low-end example is about $3,000 for a wood deck on level ground. Its high-end example is about $26,000 for a stone deck with lighting and leveling. Labor runs about $5 to $50 per square foot depending on material and trade.

MaterialMaterials only, per sq ft (Fixr 2025)Heat and wear notes
Broom-finish concrete$6 to $10Fixr says it stays relatively cool and can be textured to resist slips; it can crack
Pavers$6 to $8Individual pieces are easy to replace if one cracks or a section settles
Brick$8 to $12Gets hot in sun; can grow moss in humid climates
Composite$8 to $16Low upkeep; Fixr notes it feels hot underfoot
Natural stone$10 to $40Dark shades absorb heat; many stones need sealing
Tile, including travertine$15 to $20Pick slip-resistant tile; travertine is porous and drains well but can stain from some chemicals
Stamped concrete$15 to $30Attractive; texture varies, so check slip resistance

Pavers vs travertine vs cool deck coatings

In Texas and Florida summers, deck heat is a real comfort and safety issue. A few practical rules:

  • Color matters more than material. Fixr notes that dark materials absorb heat. Light-colored pavers or travertine stay cooler than dark stone or dark composite.
  • Travertine is a natural, porous stone that many owners like for comfort underfoot. Ask the installer about sealing and about chemical splash, since Fixr notes it can stain.
  • Spray-on cool deck coatings go over existing concrete. They are a cheaper refresh than replacing the slab, though they wear and need recoating.
  • Slope. Fixr notes deck surfaces should slope about one-quarter inch per foot away from the pool so water and dirt drain away.

Texas clay soil and deck movement

Much of Central and North Texas sits on expansive clay that swells when wet and shrinks when dry. Long, rigid concrete slabs can crack and separate from the coping as the soil moves. Builders deal with this using control joints, an expansion joint between deck and coping, and drainage that keeps water away from the slab. Pavers on a compacted base flex more and can be reset. Ask any Dallas, Austin or San Antonio bidder how they handle soil movement. For deck materials in detail, see pool decks and coping materials.

Hail-resistant choices

North Texas is hail country. Hard decking such as concrete, pavers and stone is rarely harmed by hail. The weak points are pool covers, vinyl liners above the waterline, light lenses, plastic equipment housings and screen panels. Our hail and freeze guide covers protection and insurance.

How much does it cost to replace pool coping?

Coping is the cap along the pool edge, between the water and the deck. It is often precast concrete, stone, brick or tile. Fixr's 2025 remodeling guide gives a coping replacement range of $3,000 to $20,000, and its deck guide prices coping at about $40 to $50 per linear foot. A 15 by 30 foot rectangle has about 90 feet of edge, so at $40 to $50 a foot the coping alone runs roughly $3,600 to $4,500 before demolition, waterline tile and deck repairs.

Signs coping needs work:

  • Loose or rocking stones
  • Cracks along the joint between coping and deck
  • Gaps where water can get behind the waterline tile
  • Sharp or broken edges that can cut swimmers

Coping removal often damages the waterline tile and the top of the plaster, so many owners do coping, tile and resurfacing together. If the deck also needs replacing, doing all three at once can save a second round of demolition.

Can you add a safety cover or automatic cover to an existing pool?

Yes. Mesh and solid safety covers that anchor into the deck can be fitted to most existing pools. Fixr's 2025 remodeling guide prices a cover addition at $2,700 to $3,700. Its 2024 build guide prices an automatic cover at about $3,594 for a 300 square foot pool up to $10,782 for a 900 square foot pool. Automatic covers on an existing pool may need a track, a housing at one end and sometimes coping changes, so they cost more to retrofit than to include in new construction.

In Florida, a cover matters for code. Chapter 515 allows an approved safety pool cover meeting ASTM F1346-91 as one of the five safety options for a new residential pool, and Florida Building Code R4501.17 exempts a pool with an approved ASTM F1346 cover from the barrier section. Make sure any cover you buy to meet code is labeled as meeting ASTM F1346, and know that a cover only protects when it is closed. Our alarms and covers guide compares layers of protection.

How much does an LED lighting upgrade cost, and who can install it?

Fixr's 2025 remodeling guide prices a new pool light at $450 to $1,200 installed as an addition and $550 to $1,700 as a replacement. Its 2024 build guide puts lights at $1,000 to $2,000 for a new pool package. The usual remodel is swapping an old incandescent light for an LED fixture in the same niche, often with color controls.

Pool lighting is electrical work in a wet location, so the license rules matter:

  • Florida: Section 489.117(4)(e) says a pool contractor's license may not be read to cover plumbing or electrical work that requires an electrical license. Many pool lighting jobs therefore need a licensed electrical contractor or a pool contractor working with one, plus an electrical permit.
  • Texas: Under Occupations Code chapter 1305, electrical work requires a TDLR license unless exempt. Connecting or disconnecting a pool-related device to an existing circuit can be done by a licensed residential appliance installer working for a residential appliance installation contractor. New circuits and wiring generally require a licensed electrician.

Ask the installer to confirm the new fixture is listed for pool use, that the bonding and GFCI protection are correct, and that the permit is closed with a final inspection. See our lighting and landscaping guide for design ideas.

Do you need a permit for a pool remodel?

For most remodels beyond cleaning and simple part swaps, yes. The exact list is set by your city or county building department, so call them or check their online permit guide before signing a contract.

Florida

Florida Building Code, Building section 105.1 requires a permit before anyone alters, repairs or demolishes a structure, or installs, alters or replaces a regulated electrical, gas, mechanical or plumbing system. Section 105.2.2 allows ordinary minor repairs without a permit only with the building official's approval and not when the work involves piping, electrical wiring or mechanical equipment. In practice, Florida owners should expect permits for:

  • Resurfacing that involves structural repair, and in many jurisdictions any resurfacing
  • New or relocated plumbing, drains, returns, skimmers or a spa
  • New lights, new circuits, heaters, heat pumps and gas lines
  • Deck replacement and new screen enclosures or rescreening jobs that change structure
  • Barrier changes, including fences, doors and alarms

The Florida Building Code's inspection section calls for a final swimming pool inspection when the pool is complete and all required enclosure requirements are in place, and says a residential pool must meet the pool safety feature rules to pass final inspection and receive a certificate of completion.

Texas

Texas Local Government Code 214.103 adopts the International Swimming Pool and Spa Code as the municipal pool code, and subsection (c) says it applies to all construction, alteration, remodeling, enlargement, and repair of pools in a city that elects to regulate pools. Big cities use newer editions: Houston's 2021 code package took effect January 1, 2024; Dallas adopted the 2021 pool code as City Code Chapter 62 (effective June 13, 2022); San Antonio adopted the 2024 edition on January 30, 2025; and Austin lists the 2024 edition with local amendments effective July 10, 2025. Unincorporated county land often has no pool permit at all, but electrical work and HOA approval still apply. See our permits and inspections guide and the Houston guide.

Who pulls the permit

In Florida, a licensed pool/spa contractor's scope covers repair and servicing of residential pools, including interior finishes and equipment, and a swimming pool/spa servicing contractor may drain a pool for repair or renovation. An owner-builder exemption exists under section 489.103(7) for your own one- or two-family home that is not for sale or lease, but you take on the contractor's legal duties. In Texas there is no statewide pool contractor license, so the permit holder is set by city rules. In both states, the person who pulls the permit is the person the inspector holds responsible. Our Florida license guide and Texas builder guide explain how to check a contractor.

Do you have to bring an old pool up to code when you remodel?

This is the question most remodel guides skip. The honest answer: it depends on what you change and on your local building official. Here is how the rules are built.

Florida: chapter 515 targets new pools, but inspections catch remodels

Chapter 515 states the Legislature's intent that all new residential swimming pools, spas, and hot tubs have at least one safety feature, and section 515.27 ties the feature to passing final inspection and getting a certificate of completion. The five options are a 515.29 barrier, an approved safety cover, exit alarms on doors and windows with direct pool access, self-closing self-latching devices on those doors, or an ASTM F2208 pool alarm. The law does not, on its face, order owners of older pools to retrofit. But a permitted remodel ends in a final inspection, and the Florida Building Code sets the barrier rules in R4501.17. A building department can require a permitted remodel that touches the barrier, doors, screen enclosure or the pool structure to have a compliant safety feature before it closes the permit. We could not find one statewide rule that sets a dollar or percentage threshold for when a pool remodel triggers full barrier compliance, so ask your building department this exact question before you sign: Will this permit require me to meet the current barrier and safety-feature rules?

Practical triggers to watch in Florida:

  • Screen enclosure work. Under FBC R4501.17.1.11, a standard screen enclosure can serve as all or part of the pool barrier. Rescreening or replacing a cage during a remodel is a natural time to fix door hardware and gaps. Screen doors that serve as pool gates must open outward and be self-closing and self-latching. See our screen enclosure guide.
  • New doors from the house. If a remodel adds sliding doors that open to the pool, the house wall becomes part of the barrier and R4501.17.1.9 calls for UL 2017 exit alarms, self-closing doors with latches at least 54 inches high, or an ASTM F2208 pool alarm.
  • Drains and suction. FBC R4501.6.6 requires suction-outlet entrapment protection per ANSI/PHTA/ICC 7. If drains or suction lines are replaced, expect current rules to apply to the new work.

Texas: the pool code applies to alterations

Because Local Government Code 214.103(c) applies the pool code to alterations, remodeling, enlargement and repair, Texas cities that regulate pools can require the altered parts to meet the code edition the city uses. How far an inspector reaches beyond the altered parts (for example, whether replacing a deck requires a new barrier) is a local call. For apartment complexes, condos and HOA pools, Health and Safety Code chapter 757 sets its own enclosure rules, including a ban on chain link for enclosures built after January 1, 1994 and a duty to inspect enclosures and gates at least every 31 days. See Texas pool barrier laws.

Federal drain rules

Every pool or spa drain cover made or sold in the U.S. must meet the federal standard under 15 U.S.C. 8003, now ANSI/APSP/ICC-16 2017. Public pools, including apartment and HOA pools, have extra anti-entrapment duties under the Virginia Graeme Baker Act. A remodel is the cheapest time to replace old drain covers, since the pool is already empty. See our drain safety guide.

Is it worth remodeling an old pool, or should you start over or remove it?

Use the condition of the shell, not the age, as the deciding factor. A 1990s gunite pool with a sound shell can be resurfaced, retiled and re-equipped for far less than new construction. A pool with major structural cracks, a shifting shell or failing plumbing under the deck may cost nearly as much to fix as to replace.

SituationUsually the better move
Sound concrete shell, worn finish, old equipmentRemodel: resurface, tile, coping, variable-speed pump, LED lights
Vinyl pool with good walls, worn linerNew liner and equipment
Major structural cracks, repeated leaks, shell movementGet an engineer's opinion; compare repair, replacement and removal
You want a totally different shape or typePrice new construction; conversions run $50,000 to $100,000 per Fixr
No one uses the poolCompare removal costs; see our pool removal guide

For scale, Fixr's 2024 build guide puts a new pool at $32,175 to $58,541 nationally, with an average of $44,688, and sprayed concrete pools at $23,417 to $127,817. If your remodel bid is above half the price of a comparable new pool, ask a second builder whether replacement makes more sense. Our structural repair guide explains how to tell surface crazing from structural cracks, and pool cost in Texas and Florida covers new construction.

Which pool remodel adds the most value?

There is no good dated study that measures resale value for each pool remodel project. The closest national data point is the National Association of Realtors' 2023 Remodeling Impact Report: Outdoor Features. For a new 18 by 36 foot in-ground gunite pool, it put the cost estimate at $90,000 and Realtors' estimated value recovered at $50,000, or 56 percent. That figure is for adding a pool, not remodeling one, but it shows that pools rarely return their full cost at sale.

What tends to help a sale, based on how buyers and inspectors look at pools:

  • Fix what an inspector will flag. Cracked coping, failing plaster, old drain covers, broken lights, missing GFCI protection and noncompliant gates show up in inspection reports and become repair requests.
  • Modern, efficient equipment. A variable-speed pump and LED lights lower running costs, which buyers notice.
  • A clean, light finish and deck. Fresh plaster or aggregate and a cool, unstained deck change listing photos.
  • Safety layers. A compliant barrier, alarms or a safety cover matter to families with small children and to insurers.

Big custom features such as grottos, slides and fire bowls are for your own enjoyment. Do not expect them to pay back at sale. Our home value guide covers resale in depth, and pool property tax explains how remodels can change your appraisal.

How does a pool remodel work, step by step?

  1. Inspection and wish list. Have a pool professional check the shell, tile, coping, plumbing pressure, equipment and electrical bonding. List must-fix items separately from wants.
  2. Design and written bids. Get at least three bids that list the same scope, materials, brands or product types, permit responsibility, start and finish dates, and warranty terms.
  3. Contract. In Florida, a residential contract over $2,500 must include the construction lien law warning (s. 713.015) and the Homeowners' Construction Recovery Fund notice (s. 489.1425). In Texas, a residential contractor must give you the statutory disclosure statement before you sign (Property Code chapter 53). See our pool contract checklist.
  4. Permits and HOA approval. The contractor or owner-builder applies; HOA architectural approval often runs in parallel. See HOA pool approval.
  5. Drain and demolition. The pool is drained, old finish is chipped out, and coping, tile or deck is removed as needed. In high groundwater areas of Florida and coastal Texas, draining is a risk. The crew should check hydrostatic relief and water table before draining. Check local drought rules before planning a refill; see drought restrictions.
  6. Structural and plumbing work. Ledges, spas, floor changes, new lines, drains and lights go in. Inspections happen before concrete is placed and before areas are covered.
  7. Tile, coping and finish. Waterline tile and coping are set, then the interior finish is applied.
  8. Refill and startup. Fixr notes most contractors want the pool refilled slowly and continuously to avoid water lines, so plan to be home. New plaster needs careful water chemistry for the first weeks. See pool water chemistry.
  9. Equipment, deck and final inspection. New equipment is started, the deck is finished, barriers are checked, and the permit is closed.

How long does a remodel take?

A resurfacing with tile can take a few weeks from drain to refill. A remodel with a spa, ledge, new deck and equipment can run one to three months, depending on permit times, inspections and weather. In Florida's rainy season and Texas spring storms, concrete and deck work often slips. Ask for a written schedule with milestones, and tie payments to completed milestones. See deposits and payment draws.

Florida-specific remodel notes

  • License check. Pool contractors are Division II specialty contractors under section 489.105. Verify any license on the DBPR license search before you pay a deposit.
  • Deposits. Under section 489.126, a contractor who takes more than 10 percent of the price as a first payment must apply for permits within 30 days and start within 90 days after permits issue, unless there is just cause or you agreed in writing to longer.
  • Recovery fund. For contracts signed on or after July 1, 2024, the Homeowners' Construction Recovery Fund cap for Division II claims (which include pool contractors) is $30,000 per claim. It only helps if the contractor was licensed when you signed.
  • Enclosures. Remodels are often paired with rescreening. Screen enclosure frames are designed under Florida Building Code chapter 20 for wind loads that vary by location. Ask whether frame repairs or new screen panels need a permit in your county.
  • Groundwater. In South and Central Florida, a drained pool can float or crack if groundwater is high. Do not let anyone drain without checking.
  • Safety notice. A licensed pool contractor building a residential pool must give you a document with chapter 515's requirements and the Department of Health's drowning-prevention publication. Ask for it on remodels too.

Texas-specific remodel notes

  • No state pool license. TDLR does not license pool builders, so check city registration, insurance, references and the electrician's TDLR license.
  • Homestead contracts. To create a valid mechanic's lien on a homestead, Texas law requires a written contract signed before work begins, signed by both spouses if married, and filed with the county clerk. Read the contract carefully before you sign.
  • Retainage. Texas owners must retain 10 percent of the contract price during the work and for 30 days after completion to protect against subcontractor and supplier claims.
  • Trust funds. Payments to a contractor are trust funds for subcontractors and suppliers under Property Code chapter 162. For homestead work over $5,000 under a written contract, the contractor must keep the funds in a separate construction account.
  • Soil and hail. Plan joints and drainage for clay soil, and pick covers and equipment housings with hail in mind in North Texas.
  • Water rules. Draining and refilling may fall under local drought stages. In Austin, Emergency Stage 5 bans using water to fill or maintain a pool.

How to choose a provider

  • Get a written condition report on shell, tile, coping, plumbing, equipment and bonding before collecting bids.
  • Ask your building department whether your remodel permit will require current barrier and safety-feature compliance.
  • Collect at least three written bids with the same scope, finish type, equipment specs and permit responsibility.
  • Verify the Florida license on DBPR or, in Texas, city registration and the electrician's TDLR license.
  • Confirm who pulls each permit (building, electrical, gas) and that final inspections are in the contract.
  • Replace old drain covers with covers meeting ANSI/APSP/ICC-16 2017 while the pool is empty.
  • Plan a variable-speed pump if the pump or motor is being replaced.
  • Check groundwater and hydrostatic relief before draining, and check drought rules before refilling.
  • Tie payments to completed milestones and keep lien releases (Florida) or the 10 percent retainage (Texas).
  • Get HOA architectural approval in writing before work starts.
  • Keep all permits, inspection results, warranties and product data for resale and insurance.

Related swimming pool builders and contractors guides

Swimming pool builders and contractors by state and city

Questions people ask

How much does it cost to resurface a pool?

Fixr's January 2025 guide puts resurfacing at $4,000 to $30,000 depending on material: plaster $4,000 to $10,000, aggregate $6,500 to $13,000, fiberglass $7,500 to $15,000, concrete $10,000 to $20,000 and tile $20,000 to $30,000. Prices go up if the shell needs crack repair or if tile and coping are replaced at the same time. See our resurfacing guide for finish life and trade-offs.

Can I remodel my pool myself?

You can do cosmetic work like cleaning tile or swapping a filter cartridge. Structural, plumbing and electrical work is a different story. In Florida, owner-builders can pull permits for their own home under section 489.103(7), but electrical work and gas lines bring their own license and permit rules. In Texas, electrical work generally needs a TDLR-licensed electrician unless a homeowner exemption applies. Mistakes with bonding, drains or groundwater can be dangerous and expensive.

Do I need to drain my pool to remodel it?

For resurfacing, tile, coping, ledges, spas and depth changes, yes. Draining has risks. In areas with high groundwater, an empty pool can shift or lift. Your contractor should check the water table and hydrostatic relief valve first and plan the refill. Fixr notes most contractors refill slowly and continuously to avoid water lines in new finishes.

Will a remodel raise my property taxes?

It can. Texas appraisal districts add the market value of new improvements, and those are not limited by the 10 percent homestead cap. In Florida, changes and improvements to a homestead are assessed at just value as of the first January 1 after they are substantially complete. Ordinary repairs and maintenance generally do not count as new improvements in Texas. See our pool property tax guide.

How often does a pool need remodeling?

Fixr notes surfaces may last 10, 20 or more years depending on material and care. Equipment like pumps and heaters often wears out sooner. Signs it is time include rough or stained plaster, leaks, loose coping, cracked tile, frequent equipment repairs and high power bills from an old pump.

Can I change the shape of my pool?

Yes, on concrete pools. Fixr's 2025 range for reshaping is $50,000 to $100,000 and for expansion $20,000 to $70,000. Reshaping usually means cutting and removing parts of the shell, adding new concrete and steel, and redoing the deck and finish. Fiberglass pools need a new shell to change shape. Get engineering and permits before starting.

Does homeowners insurance pay for a pool remodel?

Normally no. Insurance covers sudden, accidental damage under your policy terms, not wear and tear or upgrades. If a covered event like a storm damaged the pool, the claim may pay to repair that damage, and you may choose to add upgrades at your own cost. Read your policy and ask your agent before starting. Our pool insurance guide explains common coverage limits.

Should I add a heater during a remodel?

If you want a longer season, a remodel is a good time because plumbing is open. Fixr prices converting to a heated pool at $1,000 to $9,000 and lists heater replacement at $2,525 to $5,550. Heat pumps work well in much of Florida and South Texas; gas heaters heat faster. See our heaters and heat pumps guide for operating cost trade-offs.

What should a remodel contract include?

Scope by item, finish and equipment types, who pulls each permit, inspection and completion dates, payment milestones, warranty terms, cleanup, and what happens if hidden damage is found. Florida contracts over $2,500 need the lien law warning and recovery fund notice. Texas residential contracts come with the Property Code disclosure statement. Our contract checklist lists every clause.

Will an older pool fail a home inspection after a remodel?

A home inspector reports conditions, not code compliance, but they often flag old drain covers, missing GFCI protection, loose coping, gate hardware and missing alarms. If your remodel was permitted and finaled, keep the paperwork. It answers many buyer questions and shows the work was inspected.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration