New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Swimming pool builders and contractors

How Much Does an Inground Pool Cost in Texas and Florida in 2026?

Dated national cost data, a line-by-line budget, and the soil, rock, groundwater, code and enclosure factors that move Texas and Florida pool prices up or down.

Dated national cost guides put a finished inground pool at roughly $35,000 to $95,000 in 2025, depending on type: Fixr's January 2025 guides average about $45,000 for vinyl liner, $60,000 for concrete and $70,000 for a fiberglass package with deck and equipment. No verified Texas-only or Florida-only survey exists, so treat those as starting points. Rock, clay, groundwater, screen enclosures, barriers and decking can add $10,000 to $40,000 or more in either state.

Key facts

  • Fixr's 2024 build guide (updated Jan. 25, 2024) puts the cost to build a pool at $32,175 to $58,541, with a national average of $44,688.
  • Fixr's 2025 concrete pool guide gives $50,000 to $90,000, average $60,000, for a 12 x 24 foot shotcrete pool with tile finish and basic equipment.
  • Fixr's 2025 fiberglass guide gives $50,000 to $95,000, average $70,000, for a 15 x 30 foot pool with concrete deck, filter, heater and pump.
  • Fixr's 2025 vinyl liner guide gives $35,000 to $65,000, average $45,000, with liner replacement every 5 to 9 years at about $3,000 to $6,000.
  • Fixr's 2025 enclosure guide lists screen enclosures at $8 to $15 per square foot and a typical enclosure average of $18,000.
  • Florida's 515.27 requires every new residential pool to have at least one of five safety features before final inspection, so a barrier, alarm or safety cover is part of the true price.
  • Florida Building Code R4501.21.4 requires a hydrostatic relief device in areas of anticipated water table, a common South Florida add-on.
  • Since Sept. 29, 2025, new pool pump motors of 1.15 to 5 total horsepower must be variable-speed under 10 CFR 431.485.
  • August 2026 average residential electricity prices were 15.91 cents per kWh in Texas and 14.99 cents in Florida (EIA, preliminary).

What does an inground pool cost in 2026?

Most families in Texas and Florida who build a standard backyard pool with a modest deck, a basic equipment set and the required safety barrier end up somewhere between the high $30,000s and the low $100,000s. Where you land depends far more on your lot, your city and your feature list than on the state line.

The honest problem is data. We could not find a published, dated, statewide survey of pool prices for Texas or for Florida from a builder association, a state agency or a trade group. The most current, clearly dated numbers we could verify are national figures from the cost guide publisher Fixr, which updated its material-specific pool guides on January 31, 2025 and its general build guide on January 25, 2024. We use those numbers below, always with the year, and then explain what moves a Texas or Florida quote above or below them.

Pool type (Fixr guide, date)Typical rangeNational averageWhat the average describes
Any material (build guide, Jan. 2024)$32,175 to $58,541$44,688Pool construction, broad average
Vinyl liner (Jan. 2025)$35,000 to $65,000$45,00012 x 24 ft installed pool
Concrete, gunite or shotcrete (Jan. 2025)$50,000 to $90,000$60,00012 x 24 ft shotcrete pool, tile finish, basic equipment
Fiberglass (Jan. 2025)$50,000 to $95,000$70,00015 x 30 ft pool with concrete deck, filter, heater and pump

Notice that the averages describe different packages. The fiberglass average includes a deck and a heater, and the concrete average does not include a big deck. That is exactly why comparing one builder's "starting at" price to another's full proposal goes wrong. Always compare the same scope.

Fixr's 2024 guide also says most families spend $45,000 to $85,000 on a typical family pool with a shallow end, a deeper area and a patio. That is a reasonable planning band for a mid-size pool in Houston, Dallas, San Antonio, Austin, Tampa, Orlando or Jacksonville before premium features. In Miami-Dade and other high-wind coastal counties, add room for a wind-rated enclosure, and in rocky parts of Central Texas, add room for rock excavation.

Why is there no reliable Texas or Florida pool price average?

Three things make a statewide average misleading:

  • Huge local differences in ground conditions. Digging in Hill Country limestone, North Texas expansive clay and South Florida sand over shallow groundwater are three different jobs.
  • Different code editions by city. Texas cities that regulate pools must use at least the International Swimming Pool and Spa Code (ISPSC) as it existed on May 1, 2019, and may adopt newer editions (Texas Local Government Code 214.101 to 214.105). Houston and Dallas use the 2021 ISPSC; San Antonio adopted the 2024 ISPSC on January 30, 2025; Austin lists the 2024 ISPSC with local amendments effective July 10, 2025. Florida uses one statewide code, the Florida Building Code, Residential (2023, 8th edition), Chapter 45, but local wind and flood rules still differ.
  • Different licensing systems. Florida requires a state-certified or locally registered pool/spa contractor under chapter 489. Texas has no statewide pool builder license (TDLR's program list includes electricians but no pool builder program), so the range of company types and prices is wider.

So the best way to get a true local number is to collect three written bids for the same drawing, the same equipment list and the same deck size. Our guide to choosing a pool builder includes a bid comparison worksheet.

What drives pool prices in Houston, Dallas, Austin and San Antonio?

CityPool code in effectMain cost drivers to ask about
Houston2021 Houston Construction Code, including Houston amendments to the 2021 ISPSC, effective Jan. 1, 2024Expansive clay and high plasticity soils, drainage on flat lots, frequent summer storms that slow work, deck movement
Dallas2021 ISPSC with Dallas amendments as City Code Chapter 62 (effective June 13, 2022)Expansive clay (engineered steel and deck joints), HOA review in many suburbs, freeze risk to exposed plumbing in winter
Austin2024 ISPSC with local amendments, effective July 10, 2025Limestone rock excavation west of I-35, slopes and retaining walls, drought stages (Stage 4 and 5 suspend new single-family pool permits)
San Antonio2024 ISPSC adopted Jan. 30, 2025Caliche and limestone in north side neighborhoods, Edwards Aquifer drought stages that affect watering and filling

Rock. Fixr's 2025 fiberglass guide lists blasting or breaking rocky terrain at $1,050 to $9,700. That number covers a lot of ground. A dig that hits solid limestone a foot down needs a rock hammer or saw for most of the hole, while a dig that hits a few ledges may add only a day. Ask each builder for a written rock clause (see below).

Clay. In DFW and Houston, expansive clay swells when wet and shrinks when dry. Builders on clay often add steel, use a soil report or engineered design, and plan deck expansion joints carefully. That can raise the shell price compared with a sandy lot, but it is cheaper than repairing a cracked deck or bond beam later. See pool cracks and structural repair.

Water. Austin's 2024 Drought Contingency Plan suspends approval of new single-family residential pool and spa permits in Drought Response Stage 4 and Emergency Stage 5, and in Stage 5 bans using water to fill or maintain pools. A delayed permit costs money if your builder's prices are only held for a set number of days. See drought restrictions and filling pools.

Electrical. Texas requires electrical work to be done by a TDLR-licensed electrician working through a licensed electrical contractor, unless an exemption applies (Occupations Code ch. 1305). Texas adopted the 2026 National Electrical Code effective September 1, 2026, and Houston reviews permit applications filed on or after that date under it. Ask whether the electrical line on your bid includes the bonding grid, the panel or subpanel, lights and the trench to the equipment pad.

City guides: Houston and the Texas overview.

What drives pool prices in Miami, Tampa, Orlando and Jacksonville?

AreaMain cost drivers to ask about
Miami and South FloridaShallow groundwater and dewatering, sand and coral rock layers, flood zones, the highest wind design speeds for screen enclosures, hurricane season delays
Tampa BayFlood zones near the coast, sinkhole-prone areas inland where builders may want soil testing, enclosure wind loads, summer storms
OrlandoSandy soils, high summer water table in many areas, screen enclosures as the standard add-on, HOA review in planned communities
JacksonvilleCoastal flood zones, sandy soils, occasional freezes, enclosure and barrier choices

Groundwater. Florida Building Code R4501.21.4 requires an approved hydrostatic relief device in areas of anticipated water table (vinyl liner pools without a structural bottom are excepted). If the hole fills with water during the dig, the builder may need pumps or well points to keep it dry until the shell is in. Ask whether dewatering is included or priced as an extra, and at what daily rate.

Flood zones. R4501.4.2.1 says pools in flood hazard areas must meet R322.2.4 (A Zones) or R322.3.3.1 (coastal high-hazard V Zones). In a V Zone, that can mean extra engineering. Check your flood zone before you get bids.

Screen enclosures. Florida Building Code Section 2002.4 requires screen enclosure frames to be designed for wind pressures based on ultimate design wind speeds from 110 to 170 mph, plus a 300-pound vertical load on any foot of a primary member. Fixr's 2025 enclosure guide lists screen enclosures at $8 to $15 per square foot, a typical range of $10,000 to $30,000 and an average of $18,000, and notes that enclosures in hurricane or high-wind areas must be stronger, adding roughly 10%. Its 2024 build guide priced a full screen enclosure for a 1,000-square-foot area at $4,313 to $7,847. The difference shows how much size, roof style and wind design change the number. See screen pool enclosures in Florida.

Licensing. A Florida pool must be built by a contractor licensed under 489.105(3)(j) or (k) (commercial or residential pool/spa), and that license number must appear on the permit application, bid, contract and ads (489.119). Licensing costs the contractor money, and the price of a properly licensed, insured company is usually higher than an unlicensed offer. The unlicensed offer is not a bargain: a contract with an unlicensed contractor is unenforceable by that contractor (489.128), and you cannot use the state's recovery fund if the contractor was not licensed when you signed (489.141).

See the Florida overview for permits and licensing.

What is in a pool price? A line-item breakdown

Builders bundle these items differently. Use this list to make sure each bid covers the same things. Where we found a dated published figure, it is shown. Where we did not, the row says what to ask.

Line itemWhat it coversPublished figure (source, year)
Design and engineeringPlan drawing, structural design, site plan for permit, soil report if neededNot published separately; ask
PermitsBuilding, electrical, plumbing or gas permits; HOA fees are separate$200 to $300 (Fixr fiberglass guide, 2025); city fees vary
Layout and excavationMarking the shape, digging, gradingExcavation and backfill $1,500 to $6,000 for fiberglass (Fixr, 2025)
Rock removalBreaking or sawing rock$1,050 to $9,700 (Fixr, 2025)
Soil haul-offTrucking dirt off siteNot published; ask how many loads are included
SteelRebar cage for concrete poolsIncluded in shell price in most bids
PlumbingSuction, return, skimmer and cleaner lines, pressure testIncluded in most bids; ask pipe size and runs
ShellGunite or shotcrete shell, fiberglass shell, or vinyl wall kitFiberglass shell $10,000 to $30,000 (Fixr, 2025)
Tile and copingWaterline tile, edge capCoping about $40 to $50 per linear foot; mosaic waterline tile $20 to $50 per sq ft (Fixr, 2025)
Interior finishPlaster, quartz, pebble, or gelcoat on fiberglassPlaster $1.50 to $5 per sq ft (Fixr concrete guide, 2025)
EquipmentPump, filter, sanitizer, controls, heater if chosenEquipment $5,000 to $7,700 (Fixr fiberglass guide, 2025)
ElectricalService, bonding, lights, GFCI protection, trenchNot published; licensed electrician bid in Texas
DeckingConcrete, pavers, travertineAbout $6,750 to $8,000 for a concrete deck around a 12 x 24 pool (Fixr, 2025)
Barrier or fenceFence, gates, alarms or safety coverFence $3,000 to $10,000, average $6,500 (Fixr, 2025)
Screen enclosure (FL)Aluminum frame and screen$10,000 to $30,000, average $18,000 (Fixr, 2025)
Water fillFilling the pool$500 to $2,000 (Fixr, 2025)
Landscaping and cleanupSod, irrigation repair, plantsLabor about $37 to $68 per hour (Fixr, 2024)

For a concrete pool, Fixr's 2025 guide splits a $50,000 to $90,000 job into roughly $30,000 to $54,000 of labor and $20,000 to $46,000 of materials. Labor is the bigger share, which is why crew experience and local wages matter so much.

Most concrete pools in Texas and Florida also need a startup period after plaster, which is labor the builder or a service company provides. Ask who does it and for how many days. See how a concrete pool is built.

How much does a pool cost per square foot?

Per-square-foot prices help you compare sizes, but they can mislead because a small pool still needs a full equipment set and permits. Here are the dated published figures:

TypeInstalled cost per sq ft of pool (source, year)
Fiberglass$100 to $200 (Fixr, 2025)
Concrete, custom$100.50 to $312.50 (Fixr, 2025)
Gunite (dry-mix)$100.50 to $278 (Fixr, 2025)
Shotcrete (wet-mix)$111 to $278 (Fixr, 2025)
Precast concrete (prefab)$69.50 to $175 (Fixr, 2025)
Vinyl liner$122 to $225 (as cited in Fixr's fiberglass guide, 2025)

By size, Fixr's 2024 build guide gives these ranges for any material:

Pool surface areaCost range (Fixr, 2024)
Up to 300 sq ft$18,646 to $33,925
301 to 600 sq ft$23,059 to $41,955
601 to 900 sq ft$29,273 to $53,261

For reference, a 12 x 24 foot pool is 288 square feet, a 15 x 30 is 450 and a 20 x 40 is 800. The 2024 size ranges are for the pool itself, not a full backyard project.

Why do pool quotes vary by $30,000 or more for the same size pool?

When two bids for a 15 x 30 pool differ by $30,000, the cause is usually one of these:

  1. Different scope. One bid includes 800 square feet of travertine deck, a heater and a fence. The other includes 300 square feet of broom-finish concrete and no fence.
  2. Allowances. One bid shows a $2,000 tile allowance and a $1,500 electrical allowance that will almost surely be exceeded. The other prices the actual tile and the actual electrical run.
  3. Rock and soil terms. One bid includes rock removal up to a stated amount. The other says rock is extra at a per-hour rate.
  4. Equipment tier. Variable-speed pump, cartridge vs sand filter, salt system, automation and heater choices can easily swing several thousand dollars. See pool pumps and pool heaters.
  5. Structural design. More steel, thicker shells or engineered designs on clay cost more up front.
  6. Finish. Basic white plaster vs quartz vs pebble. Fixr's 2025 fiberglass guide shows finishes ranging from $35,000 to $95,000 for the whole pool depending on finish type.
  7. Who carries risk. A builder with workers' compensation, general liability, warranty reserves and a Florida license has real overhead. A low bid may skip those.
  8. Timing. Spring is the busiest season. Some builders price higher when their schedule is full.

If you cannot explain the gap after comparing line by line, ask each builder in writing: "What does your price include that the other does not?" See the pool contract checklist.

Allowances, fixed prices and what "starting at" leaves out

An allowance is a placeholder amount for something not yet chosen, such as tile or lighting. If the real cost is higher, you pay the difference. Allowances are not bad by themselves, but low allowances make a bid look cheaper than it is.

A fixed price covers a defined scope. Changes go through written change orders. A fixed price is easier to compare, but only if the scope is clear.

"Starting at" or package prices often leave out:

  • The deck beyond a narrow strip, and any deck drainage
  • The barrier: fence, gates, alarms or a safety cover
  • Electrical service upgrades and the trench to the house panel
  • Rock, haul-off, dewatering and access work (removing and rebuilding a fence)
  • Gas line for a heater, or a heat pump circuit
  • Permits, HOA review fees, surveys and engineering
  • Landscaping, irrigation repair and sod
  • Startup chemicals and the first weeks of service
  • In Florida, the screen enclosure

A useful exercise: ask each builder to price your project "ready to swim and ready to pass final inspection," including the barrier. Then the numbers are much closer to real.

How do rock, clay, sand and groundwater change the price?

Central Texas limestone and caliche

In parts of Austin, San Antonio and the Hill Country, limestone or caliche (a hard, cemented soil layer) can sit just under the surface. Excavation then needs rock hammers or saws, and haul-off loads get heavier. Fixr's 2025 range for breaking rock, $1,050 to $9,700, shows how wide this is. Ask whether the builder has dug on your street or in your subdivision and what they found.

Expansive clay in DFW and Houston

Clay that swells and shrinks can lift or drop decks and stress the shell. Builders may recommend a soil report, more steel, deeper deck footings or piers, and careful drainage. These items raise first cost. They can also prevent the most expensive repairs a pool owner faces.

Sand and high water table in Florida

Loose sand can cave in during excavation, and shallow groundwater can fill the hole. Dewatering pumps may run day and night until the shell is in. Florida code requires hydrostatic relief in areas of anticipated water table. A fiberglass shell must be filled as it is backfilled (FBC R4501.19 notes fiberglass and vinyl pools are filled on installation), and no pool in high groundwater should be drained without professional guidance because water pressure under the pool can push it up. See gunite vs fiberglass vs vinyl.

Access and slope

If an excavator cannot reach the backyard, the builder may need to remove a fence section, use smaller machines or, for fiberglass, rent a crane. Sloped lots may need retaining walls, which Fixr's 2025 fiberglass guide prices at $3,500 to $10,000.

Soil reports

A soil (geotechnical) report is a test of what is under your yard. It is not required for every backyard pool, but your city or engineer may require one on problem soils, and it can settle disputes about "unexpected" conditions. Ask who pays for it and what happens to the price if it finds rock or groundwater.

What do spas, heaters, plunge pools and other extras cost?

FeaturePublished cost (source, year)
Attached spa (fiberglass pool and spa combo)$35,000 to $90,000 for the combined package (Fixr, 2025)
Electric heater installed$2,231 to $5,338 (Fixr, 2024)
Pool heater installed, any type$2,500 to $5,000, average $3,500 (Fixr, 2025)
Solar heater$2,599 to $11,929 (Fixr, 2024)
Pool lights$1,000 to $2,000 (Fixr, 2024); $450 to $1,200 per light (Fixr, 2025)
Automatic coverAbout $3,594 (300 sq ft pool) to $10,782 (900 sq ft pool) (Fixr, 2024)
Built-in steps$1,796 to $3,268 (Fixr, 2024)
Zero-entry (beach entry)$5,040 to $9,170 added (Fixr, 2024)
Infinity edgeAt least $20,000 to $26,000 added (Fixr, 2024)
Water features$250 to $15,000 (Fixr, 2025)
Robotic cleaner$600 to $1,000 (Fixr, 2025)
Simple pool house, no bathAbout $6,000 (Fixr, 2024)

Small plunge pools

Plunge pools save money on excavation, shell and chemicals, but they still need a pump, filter, electrical, barrier and permit. Fixr's 2025 guides list small vinyl plunge pools at $10,000 to $15,000, fiberglass plunge pools at $15,000 to $40,000, and a basic precast concrete plunge pool, painted, at the low end of $20,500. See small plunge and cocktail pools.

Spa add-on

An attached spa adds a second body of water, more plumbing, often a heater and more electrical load. For concrete pools, ask the builder to show the spa as its own line. For fiberglass, the combo price above is the clearest dated figure we found. See hot tubs and spas.

What will barriers and safety features add?

Florida. Under Florida Statutes 515.27, a new residential pool cannot pass final inspection without at least one of these: a barrier meeting 515.29, an approved safety cover meeting ASTM F1346-91, exit alarms on all doors and windows with direct pool access, self-closing and self-latching devices on those doors with the release at least 54 inches above the floor, or an in-pool alarm meeting ASTM F2208. Exit alarms must reach 85 dB A at 10 feet. The 515.29 barrier must be at least 4 feet high on the outside. Fixr's 2025 fence guide puts pool fences at $3,000 to $10,000 with an average of $6,500, and installed mesh fencing at about $7 to $10 per linear foot. A screen enclosure built to code can serve as part or all of the barrier (FBC R4501.17.1.11).

Texas. There is no statewide single-family pool barrier statute like Florida's chapter 515. Barrier rules for backyard pools come from the city's adopted ISPSC and any local ordinance, plus HOA rules. Chapter 757 of the Health and Safety Code covers pools at apartments and property owners associations, not single-family backyards. Budget for a code-compliant fence and self-closing gate in every Texas city that regulates pools. See Texas pool barrier laws and Florida pool barrier laws.

Layering more than one feature costs more but protects more. Florida DOH promotes layers of protection: supervision first, then barriers, alarms and covers, emergency preparation and swimming skills. See alarms, covers and safety layers.

What will the first year of owning a pool cost?

The build price is only part of it. Here is an example worksheet. The assumptions are stated so you can swap in your own numbers.

ItemExample first-year figureAssumption and source
Weekly or monthly service$350 to $2,600 a yearFixr 2025 maintenance range, depending on visit frequency; DIY costs less in cash
Pump electricity, single-speed exampleAbout $700 a yearOur example: a pump drawing 1.5 kW for 8 hours a day for 365 days uses 4,380 kWh; at Texas's August 2026 average of 15.91 cents per kWh (EIA) that is about $697, at Florida's 14.99 cents about $657
Pump electricity, variable-speed exampleOften a fraction of the aboveENERGY STAR says cutting pump speed in half lets a pump use one-eighth as much energy; certified in-ground pumps save about $50 a year versus standard pumps on its assumptions
First fill$500 to $2,000Fixr 2025; ask your utility about rates and drought rules
Chemicals and startupAsk builderOften included for startup; then part of service or DIY cost
HeatingVaries widelyDepends on heater type, fuel and how many months you heat; a cover cuts heating costs about 50 to 70% according to ENERGY STAR
Homeowners insurance changeAsk your agent before you buildInsurers may raise liability limits or premiums or require a fence; some may ask for an umbrella policy
Property tax changeAsk your appraisal district (TX) or property appraiser (FL)A pool is usually treated as an improvement that adds value; amounts vary by county

Because pool pumps sold for most pools must now use variable-speed motors (10 CFR 431.485 for 1.15 to 5 total horsepower motors made on or after Sept. 29, 2025), most new pools will run at the lower energy end. Our electricity example assumes a single-speed pump only to show the scale of savings.

See pool energy and water use, pool service costs, pool insurance and liability and pool property tax.

Annual cost of ownership after year one

Ongoing costHow oftenPublished figure (source, year)
Routine serviceYearly$350 to $2,600 (Fixr, 2025)
Fiberglass maintenanceYearly$350 to $550 (Fixr fiberglass guide, 2025)
Vinyl liner replacementEvery 5 to 9 years$3,000 to $6,000 (Fixr, 2025)
Concrete resurfacingEvery 10 to 15 yearsPlaster lasts roughly 5 to 10 years per Fixr 2025; a remodel averages $15,000 (Fixr pool remodeling, 2025)
Fiberglass gelcoat resurfacingRarely; late in the pool's life$10,000 to $20,000 (Fixr, 2025)
Pump replacementWhen it fails$700 to $1,300 installed (Fixr fiberglass guide, 2025)
Filter replacementWhen it fails$500 to $2,000 (Fixr, 2025)
Heater replacementWhen it fails$2,500 to $5,000 (Fixr, 2025)

Setting aside a little every month for these big items is the simplest way to avoid surprises. See pool resurfacing cost.

Are pool prices going up in 2026?

We did not find a verified, dated index of pool construction prices for 2026 in Texas or Florida, so we cannot give you a percentage. What we can confirm are rule changes that affect the baseline:

  • Variable-speed pump motors. Under 10 CFR 431.485, pool pump motors of 1.15 to 5 total horsepower made on or after September 29, 2025 must be variable-speed. Smaller motors from 0.5 to under 1.15 total horsepower follow on September 28, 2027. A variable-speed motor costs more up front than an old single-speed one, but uses far less power.
  • New electrical code in Texas. Texas adopted the 2026 National Electrical Code effective September 1, 2026. Builders may need to adjust electrical designs. Ask whether your bid reflects the current code.
  • Updated city pool codes. San Antonio and Austin moved to the 2024 ISPSC in 2025.

Practical advice: ask how long a bid's price is held, whether it can change if steel, concrete or equipment prices rise, and whether there is a cap on any increase. Put the answer in the contract. See pool construction timeline for how seasons affect schedules.

What is the cheapest type of inground pool?

On Fixr's January 2025 averages, vinyl liner has the lowest typical installed price ($45,000), followed by concrete ($60,000 for a 12 x 24 package) and fiberglass ($70,000 for a 15 x 30 package with deck and heater). Because the packages differ, the gap between concrete and fiberglass is not as clear as the averages suggest. Small fiberglass spools and plunge pools can come in well below these numbers.

Lowest first cost is not the same as lowest lifetime cost. A vinyl liner needs replacement every 5 to 9 years at about $3,000 to $6,000. Concrete plaster needs resurfacing every 10 to 15 years. Fiberglass gelcoat lasts the longest but costs $10,000 to $20,000 to redo. Over 20 to 30 years, the totals can come closer than the purchase prices. Vinyl liners also face hail, pets and sharp objects, which matters in North Texas hail country. Our comparison of pool types has a lifecycle table.

Above-ground pools are cheaper still. Fixr's 2024 guide notes that hard-sided above-ground kits with pump and filter can cost under $7,000. In Florida, an above-ground pool over 24 inches deep still falls under chapter 515's safety rules. See above-ground pools.

How to get an accurate local price

  1. Check your flood zone (Florida) and HOA rules before calling builders.
  2. Decide your must-haves: size, depth, spa, heat, deck size, barrier type.
  3. Get three written bids based on the same drawing and the same equipment list.
  4. Ask each builder for a line-item price, not just a package total.
  5. Ask for written rock, soil, dewatering and haul-off terms.
  6. Price the barrier and, in Florida, the screen enclosure in the same proposal.
  7. In Florida, verify the pool/spa contractor license on the DBPR site. In Texas, verify the electrician's TDLR license.
  8. Ask your insurance agent and your county appraisal office what changes after the pool is built.
  9. Compare first-year and 10-year costs, not just the build price.

Then read the deposit and payment schedule guide before you sign.

How to choose a provider

  • Write down your must-have features before asking for bids.
  • Check your flood zone and HOA rules first.
  • Ask for line-item bids based on one drawing and one equipment list.
  • Get written rock, soil, dewatering and haul-off terms.
  • Include the barrier and any screen enclosure in the price.
  • Confirm what allowances are included and whether they are realistic.
  • Verify the Florida pool/spa contractor license or the Texas electrician's TDLR license.
  • Ask how long the price is held and whether it can increase.
  • Budget the first-year costs: service, power, water, insurance and tax.
  • Set aside money each year for resurfacing or liner replacement.

Related swimming pool builders and contractors guides

Swimming pool builders and contractors by state and city

Questions people ask

How much does an inground pool cost in Texas?

No verified Texas-only survey exists. Using Fixr's January 2025 national guides, plan on about $35,000 to $65,000 for vinyl liner, $50,000 to $90,000 for concrete and $50,000 to $95,000 for fiberglass. Rock in Austin, San Antonio and the Hill Country, and engineered designs on expansive clay in Dallas and Houston, can push a project above those ranges. Get three line-item bids for the same scope to find your real local number.

How much does an inground pool cost in Florida?

The same national ranges are the best dated starting point: roughly $35,000 to $95,000 depending on type, per Fixr's 2025 guides. Florida projects often add a screen enclosure, which Fixr's 2025 guide averages at $18,000, plus dewatering on high water tables, hydrostatic relief, and a required safety feature under chapter 515. Projects in flood zones or the highest wind zones in South Florida may need extra engineering.

Does a high water table in Florida raise pool cost?

It can. If groundwater fills the hole, the builder may need pumps or well points to keep the excavation dry until the shell is set, which adds labor and equipment time. Florida Building Code R4501.21.4 requires a hydrostatic relief device in areas of anticipated water table. Ask each builder whether dewatering is included or billed per day, and how they will protect the pool from rising groundwater during construction.

How much does it cost to dig a pool in rocky Texas Hill Country soil?

Fixr's 2025 fiberglass guide lists breaking or blasting rocky terrain at $1,050 to $9,700, on top of normal excavation. The real number depends on how hard and how deep the rock is. Ask for a rock clause that says what rock removal is included, how extra rock is measured (hours, loads or cubic yards) and the rate, so you are not surprised mid-dig.

How much does decking cost around a pool?

Fixr's January 2025 pool deck guide puts a concrete deck around a 12 x 24 pool at about $6,750 to $8,000, average $7,500. Materials alone run about $6 to $10 per square foot for concrete, $6 to $8 for pavers, $15 to $30 for stamped concrete and $15 to $20 for tile. Coping is about $40 to $50 per linear foot. On clay soils in Texas, ask how the deck will handle movement.

What are the hidden costs of putting in a pool?

The most common surprises are rock, soil haul-off, dewatering, electrical service upgrades, gas lines for heaters, the barrier or fence, extra deck, landscaping and irrigation repair, HOA fees, and higher insurance. In Florida, add the screen enclosure. After the build, add service, chemicals, electricity, water and future resurfacing or liner replacement. Ask for a ready-to-swim, ready-to-pass-final price.

How much should I budget for landscaping, fencing and electrical after the pool?

For fencing, Fixr's 2025 guide gives $3,000 to $10,000 with a $6,500 average. Landscaping labor runs about $37 to $68 per hour in Fixr's 2024 guide, plus plants and materials. Electrical costs vary by distance to the panel and whether you need a service upgrade, so get a written price from a licensed electrician. Ask for these three prices before you sign the pool contract so you see the full project cost.

What does a pool with a spa add to the price?

For fiberglass, Fixr's 2025 guide lists pool and spa combos at $35,000 to $90,000 for the whole package. For concrete pools, a spa adds its own shell, plumbing, jets, often a heater and more electrical work. Ask the builder to show the spa as a separate line item so you can compare. Remember a spa over 24 inches deep counts as a pool under Florida's chapter 515.

How much does a screen enclosure add to a Florida pool?

Fixr's January 2025 enclosure guide gives screen at $8 to $15 per square foot, a typical project range of $10,000 to $30,000 and an average of $18,000, with about 10% more for hurricane-area construction. Florida Building Code Section 2002.4 requires the frame to be designed for local wind speeds from 110 to 170 mph. A code-compliant screen enclosure can also serve as your pool barrier.

How much does a pool cost to own per year after it is built?

Fixr's 2025 maintenance guide puts service at $350 to $2,600 a year depending on frequency. Add electricity for the pump, water top-offs, chemicals if you do your own care, any heating, and higher insurance. Then add savings for long-term items: a vinyl liner every 5 to 9 years ($3,000 to $6,000) or concrete resurfacing every 10 to 15 years.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration