New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Swimming pool builders and contractors

How Much Does Pool Resurfacing Cost, and Which Finish Is Right: Plaster, Quartz, Pebble or Tile?

Dated 2018 to 2026 cost ranges for every finish, how long each lasts, the step-by-step process, safe draining in Florida groundwater and Texas drought, permits, and who may legally do the work.

Resurfacing a concrete pool typically costs $4,000 to $30,000 (Fixr, 2025): plaster $4,000 to $10,000, quartz or pebble $6,500 to $13,000, full tile $20,000 to $30,000. Plaster wears out fastest; pebble and tile last longest. Concrete pools usually need it every 10 to 20 years. The pool must be drained, so check groundwater first in Florida and drought stages in Texas.

Key facts

  • Fixr (updated Jan. 31, 2025): pool resurfacing $4,000 to $30,000; plaster $4,000 to $10,000; aggregate $6,500 to $13,000; tile $20,000 to $30,000.
  • Bob Vila (May 2024): most inground pools cost $6,000 to $15,000 to resurface.
  • River Pools (Nov. 2020): pebble finishes $8,000 to $15,000, about $5,000 to $10,000 more than plaster, lasting 10 to 20 years with good care.
  • This Old House (updated June 2026): concrete pools need resurfacing every 10 to 20 years depending on region; plain plaster about $5 per square foot.
  • Fixr (2025): painting a pool costs $1,400 to $2,500; This Old House says acrylic paint lasts 2 to 3 years and epoxy 7 to 10.
  • Fla. Stat. 489.105 lets swimming pool/spa servicing contractors refinish interiors and drain pools for repair or renovation.
  • Florida pool specialty contractors (including finishes) may not contract directly with the public; they work under a licensed pool/spa contractor (DBPR).
  • Florida Building Code, Residential R4501.21.4 requires a hydrostatic relief device where a water table is anticipated.
  • Austin's drought plan bars using water to fill or maintain pools in Emergency Stage 5.

How much does it cost to resurface a pool?

Most concrete pool resurfacing jobs land in the mid four figures to low five figures. The finish you pick, the pool's size, and how much prep and tile work is needed decide where you fall. National cost guides do not publish Texas- or Florida-only numbers, so we show named, dated sources and their years. Use them to check quotes, not as a price list.

Finish or jobCost rangeSource and year
Resurfacing, all types$4,000 to $30,000Fixr, updated Jan. 31, 2025
Plaster resurfacing$4,000 to $10,000Fixr, 2025
Aggregate (quartz, pebble) resurfacing$6,500 to $13,000Fixr, 2025
Fiberglass pool resurfacing$7,500 to $15,000Fixr, 2025
Concrete pool resurfacing$10,000 to $20,000Fixr, 2025
Full tile interior$20,000 to $30,000Fixr, 2025
Painting a pool$1,400 to $2,500Fixr, 2025
Most inground pools$6,000 to $15,000 (overall range $5,500 to $30,000)Bob Vila pool repair guide, May 2024
Pebble finish$8,000 to $15,000, about $5,000 to $10,000 more than plasterRiver Pools, Nov. 2020
Concrete pool interior plus waterline tile$10,000 to $20,000River Pools, Jan. 2018

Per-square-foot and labor figures

  • Plain plaster: about $5 per square foot, with polished exposed aggregate nearly double (This Old House, updated June 2026). Bob Vila (July 2022) gave $3 to $5.
  • Glass waterline tile installed: about $30 to $50 per foot, based on a Florida estimate (River Pools, 2018).
  • Labor $45 to $65 per hour; draining $175 to $225; cleaning about $250; refilling about $55 per 5,000 gallons of water (Bob Vila, July 2022, citing Angi and others). Your water rate and drought stage change the refill cost.

What pushes the price up

  • Prep. River Pools notes that hollow (delaminated) plaster may need to be ground off first. Full chip-out costs more than an acid wash and bond coat over sound plaster.
  • Square footage, including the floor, walls, steps, benches and the tile perimeter.
  • Tile and coping replaced at the same time.
  • Custom shapes, spas and attached features.
  • Repairs found after draining, such as cracks, spalling, leaking fittings or a bad hydrostatic valve.
  • Region. River Pools says northern states usually cost more than southern states such as Florida.

Plaster vs quartz vs pebble vs tile: what is the difference?

FinishWhat it isLifespan claims (source)ProsCons
Plaster (marcite)White cement and marble dust, troweled smooth; can be tintedAbout 10 years (Bob Vila 2022); 5 to 10 years (River Pools 2020); 10 to 15 years for gunite pools (River Pools 2018)Lowest cost, classic look, smoothEtches, stains and roughens; In The Swim notes color can vary and haze over time
QuartzPlaster with colored quartz or ceramic-coated sandAbout 12 years (Bob Vila 2022); 7 to 12 years (River Pools 2020)Harder than marble, so more resistant to chemicals and water (In The Swim)Costs more than plaster
PebbleSmall natural pebbles in cement, exposed10 to 20 years if well cared for (River Pools 2020)Much higher resistance to water and chemicals (In The Swim); resists stains and algae; River Pools says it usually skips the regular acid washes plaster needsBumpy texture; highest aggregate cost
Glass beadGlass beads in polymer-modified mortar20+ years (Bob Vila 2022); 7 to 12 years (River Pools 2020)Reflective, slip resistantRiver Pools cites reports of fading and beads loosening
Tile (full interior)Ceramic, porcelain or glass tile throughoutAt least 20 years (This Old House 2026)Most durable, easy to cleanHighest cost; In The Swim notes grout can stain and harbor algae
PaintEpoxy, acrylic or rubber-based pool paintAcrylic 2 to 3 years, epoxy 7 to 10 (This Old House 2026); 2 to 5 years, epoxy about 7 (Bob Vila 2022)Lowest upfront costShort life; must be compatible with prior coating

The lifespan numbers above do not agree, because they come from different years and writers and depend on water chemistry and climate. Treat them as rough ranges. This Old House says concrete pools need resurfacing every 10 to 20 years depending on region. Ask any contractor what the finish manufacturer's warranty covers and for how long.

Vinyl and fiberglass pools

Vinyl liner pools are not resurfaced; the liner is replaced. This Old House says liners are replaced every 5 to 9 years and puts liners at about $1 to $5 per square foot; Bob Vila (2022) gave $1,000 to $3,500 for a liner replacement. Fiberglass pools can be recoated: This Old House puts epoxy resurfacing from about $1,500 and full fiberglass polymer resurfacing at $15,000 or more, while Fixr (2025) lists $7,500 to $15,000.

What are the signs a pool needs resurfacing?

  • Rough surface. In The Swim says plaster eventually becomes rough, which scrapes feet ("pool toe") and catches dirt and algae.
  • Stains that will not lift with normal brushing and chemistry.
  • Etching and pitting, often from water that was too acidic or low in calcium for long periods.
  • Delamination: hollow-sounding spots, blisters or flaking patches.
  • Exposed gunite showing through worn spots.
  • Cracks, leaks and discoloration, which Fixr lists as signs it is time.
  • Algae that keeps coming back in a rough, porous finish even with good chemistry.

For public pools in Florida, rule 64E-9.004 requires pools to be refinished when surfaces can no longer be kept in a safe and sanitary condition.

What is pool plaster delamination?

Delamination means the finish is coming loose from the layer underneath. You may hear a hollow sound when you tap it, see bubbles or blisters, or find flakes and patches peeling off. In The Swim warns that improper work can cause bond failure, crazing, shading and etching. This Old House stresses roughening the old surface so new layers bond, and using a bonding agent where new plaster meets old; without one, it says, the new material will crack as it dries.

Small delaminated spots can sometimes be cut out and patched. Widespread hollow plaster usually means the old finish must be ground or chipped off before resurfacing, which River Pools lists as a cost factor. If a brand-new finish delaminates in its first years, check the installer's warranty and see the legal notice steps in our cracks and structural repair guide.

What happens during a pool resurface, step by step?

  1. Inspection and quote. The contractor checks the finish, tile, coping, fittings and any cracks, and should say whether it plans a chip-out or a bond coat.
  2. Draining. The pool is pumped down, with groundwater and the hydrostatic valve checked first (see below). The water goes where your city allows.
  3. Prep. This Old House describes removing loose plaster and roughening the surface by sandblasting, chipping or chemical etching. Cracks and spalls are repaired first.
  4. Tile and fittings. Waterline tile is replaced or cleaned, and fittings, lights and return eyeballs are prepared or upgraded. River Pools says waterline tile is usually replaced during resurfacing.
  5. Bond coat, where needed, so the new finish grips the old.
  6. Application. The finish is troweled on (plaster, quartz) or applied and exposed (pebble).
  7. Refill. The pool is refilled on the schedule the finish maker and contractor set. Ask whether the fill must run without stopping.
  8. Startup. A period of brushing, filtering and careful chemical balancing while the new surface cures.

How long does it take?

The sources we checked do not give a reliable day count, and it depends on pool size, finish type, prep and weather. Ask for a written schedule covering each step above, and plan for the pool to be out of use from draining until startup is complete. In The Swim says the best time to plaster is when the weather is somewhat cool and humid, which in Texas and Florida usually means spring or fall rather than midsummer.

What happens during plaster startup?

Startup is when many new finishes are made or ruined. In The Swim tells owners to "be sure to ask about the startup procedures" before hiring. Ask who does startup (the plasterer or your pool service), how often the pool will be brushed, which chemicals will be used and when, how long you must wait before swimming, adding salt or turning on a heater, and what water readings the finish maker requires for the warranty. Get those instructions in writing.

Is it safe to drain my pool to resurface it in Florida (or on the Texas coast)?

It can be, with care. The danger is groundwater pushing up on an empty pool. River Pools warns that groundwater can create enough pressure to push a carelessly drained pool upward, and that a floated pool often cracks badly. In The Swim says to open the hydrostatic relief plugs when the pool is drained.

  • The Florida Building Code, Residential (R4501.21.4) requires an approved hydrostatic relief device in areas of anticipated water table, except plastic liner pools.
  • Schedule draining in drier months when possible, and avoid the summer rainy season and the days after a tropical storm or hurricane.
  • Ask the contractor how it will check the water table and the hydrostatic valve, and how long the pool will sit empty.
  • Florida law lists "substantially or completely drain a pool for repair or renovation" within the licensed swimming pool/spa servicing contractor's scope (Fla. Stat. 489.105).

Can a pool be resurfaced without draining?

Not a full resurface. Small repairs can be made underwater with patch products made for wet use (In The Swim names an underwater-rated plaster patch). A full replaster, quartz, pebble or paint job needs an empty, prepared shell.

Water disposal and refill: drought timing in Texas, rain timing in Florida

A typical pool holds thousands of gallons. Draining and refilling it touches local water rules.

  • Where the water goes. Cities regulate where pool water may be discharged and whether it must be dechlorinated first. The Florida residential code also bars direct or indirect connections between a storm drain or sewer and any line connected to a pool unless the authority approves. Ask your contractor how it will discharge and check with your city.
  • Drought stages in Texas. Water utilities set their own drought rules. Austin's drought plan bars using water to fill, clean or maintain a pool in Emergency Stage 5, and suspends new single-family pool permits in Stages 4 and 5. If your city enters a high drought stage, a drained pool might not be refillable for a while. Check your utility's current stage before you drain.
  • Florida rain. Heavy summer rain raises groundwater and can interrupt work on an empty pool. Spring or fall is usually the easier window.

Full city-by-city detail is in our drought restrictions and pool filling guide.

Should I replace tile and coping at the same time?

Often, yes, if they are near the end of their life. The pool is already drained and the crew is already on site, and River Pools says waterline tile is usually replaced during resurfacing anyway. Replacing coping later can damage a new finish at the edges.

ItemReplacement cost (Fixr, 2025)
Coping$3,000 to $20,000
Tile$3,000 to $50,000
Regrouting$5,000 to $15,000
Lights$550 to $1,700
Skimmer$1,500 to $3,000

If coping is loose or the tile line is cracked, find out why first. Deck movement and bond beam cracks are common on Texas clay; see pool cracks and pool decks and coping materials. Bigger upgrades are covered in our pool remodel guide.

Can I paint my pool instead of replastering?

You can, and it costs far less upfront: Fixr (2025) puts painting a pool at $1,400 to $2,500, with most pools needing up to 10 gallons. The trade-off is life span. This Old House (2026) says acrylic paint lasts 2 to 3 years and epoxy 7 to 10, with rubberized products in between. It also notes paint prep: wash the plaster with muriatic acid, rinse with TSP and water, and confirm the new paint is compatible with any old coating. Paint over failing, delaminated plaster will not last. Once a pool is painted, going back to plaster usually means removing the paint first.

Does pool resurfacing need a permit?

It depends on your city or county and the scope. A like-for-like refinish of a private pool may not need a building permit in some places, while work that changes plumbing, electrical, lights, structure, or the deck often does. We could not confirm a uniform rule for Houston, Dallas, San Antonio, Austin, Miami, Tampa, Orlando or Jacksonville, so call your building department before work starts.

  • Florida public pools (apartments, condos, HOAs, hotels) also involve the county health department. Florida DOH publishes a "Public Pool Resurfacing Notification" guidance form for health department and building department use, and public pools must keep their operating permits current.
  • Texas public pools fall under DSHS rules and local health permits; see Texas public pool rules.
  • In Florida, starting work that requires a permit without one is a prohibited act under Fla. Stat. 489.127.

See our pool permits and inspections guide.

Who can legally resurface a pool in Florida and Texas?

Florida

Under Fla. Stat. 489.105, a swimming pool/spa servicing contractor may "refinish interiors" and drain pools for repair or renovation. Residential pool/spa contractors cover interior finishes on residential pools, and commercial pool/spa contractors cover any pool. DBPR also licenses swimming pool specialty contractors in finishes and other trades, but these specialty contractors may not contract directly with the public; they must work under a licensed pool/spa contractor. So the company you sign with should hold a CP or RP license. Check it on DBPR's lookup at myfloridalicense.com, and expect the license number on the contract and any ad, as Fla. Stat. 489.119 requires. For contracts over $2,500, Florida also requires the recovery fund notice and the construction lien law warning in the contract.

Texas

Texas has no state pool contractor license, so anyone can offer resurfacing. That puts the burden on you: ask for references from jobs at least two or three years old, proof of liability and workers' compensation coverage, the finish manufacturer's warranty terms, and a detailed written contract. If lights or wiring are touched, Texas requires a TDLR-licensed electrician (or for limited pool equipment hookups, a licensed residential appliance installer).

Hard water, stains and keeping a new finish looking new

Many Texas and Florida pools sit in sun most of the year, and many owners top off frequently with local tap water. Keeping the water balanced protects the finish you just paid for:

  • Low pH, low alkalinity or low calcium water can etch plaster and pull it apart over time.
  • High calcium and high pH water can leave scale and roughness, especially at the waterline.
  • Metals in fill water or from corroding equipment can stain new finishes.

Our pool water chemistry guide covers calcium hardness and the saturation index, and our maintenance schedule covers brushing and testing frequency.

How to choose a provider

  • Note the signs: roughness, stains, etching, hollow spots, cracks or exposed gunite.
  • Pick a finish based on budget, feel and how long you plan to keep the house.
  • Get at least two written quotes that state chip-out or bond coat, tile, coping and startup.
  • In Florida, confirm the contractor's CP or RP license on DBPR's lookup.
  • In Texas, ask for older references, insurance proof and the finish maker's warranty.
  • Call your building department about permits.
  • Check your water utility's drought stage (Texas) and the rain forecast (Florida) before draining.
  • Ask how the contractor will check groundwater and the hydrostatic valve.
  • Ask where the drained water will go and whether it will be dechlorinated.
  • Get startup instructions and warranty water-chemistry requirements in writing.
  • Keep the pool full and balanced after startup to protect the new finish.

Related swimming pool builders and contractors guides

Swimming pool builders and contractors by state and city

Questions people ask

How much does it cost to resurface a pool?

Fixr (January 2025) puts pool resurfacing at $4,000 to $30,000 overall: plaster $4,000 to $10,000, aggregate such as quartz or pebble $6,500 to $13,000, and full tile $20,000 to $30,000. Bob Vila (May 2024) says most inground pools run $6,000 to $15,000. Size, prep, tile and coping work, and repairs found after draining move the price. Get at least two written quotes.

How often does a pool need resurfacing?

Sources differ. This Old House (2026) says concrete pools need it every 10 to 20 years depending on region, River Pools (2018) says 10 to 15 years, and Bob Vila (2022) says about every 10 to 12 years. Plaster wears fastest; pebble and tile last longest. Water chemistry matters as much as finish choice.

What is the difference between plaster, quartz and pebble finishes?

Plaster is white cement and marble dust, the cheapest and smoothest. Quartz adds hard quartz or ceramic-coated sand for better chemical resistance. Pebble exposes small stones for the most durable, stain-resistant aggregate finish, but it feels bumpy. River Pools (2020) put pebble at $8,000 to $15,000, about $5,000 to $10,000 more than plaster.

Can a pool be resurfaced without draining?

No. A full resurface needs an empty, prepared shell. Small chips and cracks can sometimes be patched underwater with products rated for wet use. If draining worries you because of high groundwater, ask the contractor how it will check the water table and the hydrostatic valve before pumping out.

Is it safe to drain my pool to resurface in Florida?

Usually, if a licensed pro does it at the right time. High groundwater can push an empty pool up and crack it. Florida's residential code requires a hydrostatic relief device where a water table is expected. Avoid draining in the summer rainy season or after storms, confirm the valve works and keep the empty time short.

Who can legally resurface a pool in Florida?

A licensed swimming pool/spa servicing contractor, residential pool/spa contractor or commercial pool/spa contractor. Fla. Stat. 489.105 includes refinishing interiors in the servicing contractor's scope. Specialty finish contractors must work under a licensed pool/spa contractor and may not contract with you directly. Look for a CP or RP number and verify it with DBPR.

Can I paint my pool instead of replastering?

Yes, for less money upfront. Fixr (2025) puts painting at $1,400 to $2,500. But This Old House (2026) says acrylic lasts 2 to 3 years and epoxy 7 to 10, and paint over failing plaster will peel. Painting also makes a later replaster harder because the paint usually must be removed first.

What is plaster delamination?

It is when the finish loses its bond with the surface below. Signs are hollow-sounding spots, blisters and flaking patches. Causes include poor prep, no bonding agent where new meets old, and poor startup. Small spots can be patched; widespread delamination usually means grinding or chipping off the old finish before resurfacing.

Does resurfacing need a permit?

It varies by city and county and by scope. Refinishing alone may not need one in some places, while work on plumbing, electrical, lights, structure or decks often does. Public pools in Florida also involve the county health department. Call your local building department before the crew drains the pool.

What happens during plaster startup?

After the pool is refilled, the new finish is cured with frequent brushing, filtering and careful chemical balancing for a period set by the finish maker. Ask in writing who handles startup, how often brushing happens, when chemicals and salt can be added, and when you can swim or heat the pool. Poor startup is a common cause of early finish problems.

Should I resurface in summer?

In Texas and Florida, spring or fall is usually better. In The Swim says plastering goes best in somewhat cool, humid weather, and Florida's summer rains raise groundwater, which makes draining riskier. In Texas, also check drought stages, since some utilities restrict pool filling in severe stages.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration