New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Swimming pool builders and contractors

Pool Maintenance Schedule: Daily, Weekly, Monthly and Seasonal Tasks for Texas and Florida

A daily, weekly, monthly and yearly pool care routine, plus month-by-month calendars for Texas freezes, pollen and hard water and Florida rain and hurricane season.

Look at your pool daily and skim every other day. Each week, test and adjust chlorine, pH and alkalinity (more often in Texas and Florida summers), brush walls and floor, vacuum, and empty baskets. Clean the filter when pressure rises 8 to 10 psi over its clean reading. Test calcium and stabilizer monthly. Run the pump for at least one full turnover a day, keep freeze protection on in Texas, and rebalance after every Florida storm.

Key facts

  • Florida's residential code requires pool filtration to provide a complete turnover in 12 hours or less (FBC R4501.20).
  • Florida public pools must turn over their water at least four times a day (rule 64E-9.008).
  • CDC advises home pool owners to check chlorine and pH at least twice a day, more often with heavy use (May 2025).
  • Swim University (Oct. 2026) suggests weekly brushing and vacuuming, and cleaning the filter when pressure rises 8 to 10 psi over the clean baseline.
  • Pool pumps sold with freeze protection must ship with it disabled or default to no higher than 40 F, 1 hour run time and half speed (10 CFR 431.465(h)).
  • Since Sept. 29, 2025, pool pump motors of 1.15 to 5 total horsepower must be variable-speed (10 CFR 431.485).
  • Fixr (2025) puts annual weekly pool service at $1,040 to $2,600 nationally, with typical maintenance at $350 to $1,050.
  • SAWS reports typical hardness of 15 to 20 grains per gallon; Austin Water reported 70 to 126 ppm in 2025.
  • NWS says hurricane season begins June 1.

How pool maintenance works: circulation, cleaning and chemistry

Every pool care routine, from a one-page checklist to a full-service contract, comes down to three jobs:

  1. Circulation: moving water through the pump and filter so dirt is caught and chemicals are mixed.
  2. Cleaning: skimming, brushing and vacuuming what the filter cannot reach, and emptying baskets.
  3. Chemistry: keeping enough sanitizer in the water and keeping it balanced so it does not damage the pool or the people in it.

Swim University's beginner guide (updated October 2026) builds its whole routine on these three parts, and so does this page. What national guides leave out is the weather. A pool in Miami runs all year in heavy rain and constant heat. A pool in Dallas may see a hard freeze in January and heavy evaporation in August. A pool in Austin or San Antonio fills with oak pollen in spring and hard-water scale in summer. Below you will find a daily, weekly and monthly routine that works anywhere, followed by month-by-month calendars for Texas and Florida.

If you just bought a home with a pool or just finished a build, start with the startup section below and the water chemistry sections, then come back to the schedule.

Pool maintenance schedule at a glance

How oftenTaskWhy
Daily (or every other day)Glance at water clarity and level; skim floating debris; check the pump is running and the timer is rightCatch problems before they grow; Swim University aims for skimming every other day
2 to 3 times a week in summerTest free chlorine and pH; add chlorineTexas and Florida heat and sun burn off chlorine fast; CDC advises home owners to check twice a day, more with heavy use
WeeklyBrush walls, floor and steps; vacuum; empty skimmer and pump baskets; test alkalinity; check filter pressureSwim University lists weekly brushing, vacuuming and basket cleaning as the minimum
As needed (watch the gauge weekly)Clean or backwash the filter when pressure rises 8 to 10 psi over the clean reading (Swim University)A loaded filter cannot hold water clear
MonthlyTest calcium hardness and cyanuric acid; inspect equipment for leaks; clean the deck and furniture; check drain covers and barriersSlow-moving numbers and safety items
Every 3 monthsInspect and clean the salt cell (salt pools)Swim University's interval; scale builds faster in hard water
Twice a yearDeep clean cartridges or DE grids; service the heater; check bonding and GFCI devices; inspect tile and caulkSpring and fall tune-ups
Every 3 to 5 yearsReplace filter sand or cartridges (Swim University)Media wears out
When the finish wears outResurface plaster, replace equipment as neededSee resurfacing

Daily pool care: the two-minute check

You do not need to do chores every day, but you should look at the pool every day. A two-minute walk-by catches most problems early.

  • Is the water clear? If you cannot see the main drain clearly, chlorine may be low or the filter may be clogged. Florida's public pool rule uses the same test: the main drain grate must be readily visible from the deck.
  • Is the pump running when it should? Power blips reset some timers. Listen for a screaming or rattling pump, which can mean it has lost prime or the basket is full.
  • Is the water level right? Swim University says keep water at least halfway up the skimmer opening or the pump can pull in air. Too high after rain, and the skimmer cannot skim.
  • Anything floating? Skim leaves before they sink and stain. In Florida, palm fronds and oak leaves; in Texas, oak, pecan and live oak debris and pollen.
  • Is the gate latched? Check that self-closing, self-latching gates and door alarms work. Safety is daily maintenance too.

If you have an automatic chlorinator, salt system or automation app, look at its reading, but do not trust it blindly. Probes drift. Test by hand to confirm.

Weekly pool maintenance checklist

  1. Test the water. Free chlorine, pH and total alkalinity at minimum. Swim University says to test at least once a week; in Texas and Florida summers, test free chlorine and pH two or three times a week.
  2. Adjust chemistry. Fix alkalinity first, then pH, then chlorine. Add one product at a time with the pump running.
  3. Skim the surface.
  4. Brush walls, steps, benches and the floor. Swim University says brush at least once a week. Brush toward the main drain. Brushing breaks up algae before it can take hold and removes the film where mustard algae starts.
  5. Vacuum. Manually or with a robotic or suction cleaner. Check that automatic cleaners are not stuck.
  6. Empty the skimmer and pump baskets. Turn the pump off first. Check the basket lid O-ring for cracks.
  7. Check the filter pressure gauge and write it down.
  8. Scrub the waterline with a tile brush or eraser pad to remove sunscreen oil and scale before it hardens.
  9. Look at the equipment pad for drips, wet spots and loose fittings.
  10. Top off water if needed, following your utility's drought stage. See drought rules for pools.

How much time does it take?

A small, screened Florida pool with a robotic cleaner and a salt system takes much less time than a large, open Texas pool under live oaks. Testing and adjusting takes minutes; brushing and vacuuming take the most time. Owners who find they cannot keep up often switch to weekly service. Fixr's 2025 cost guide says annual contracts with weekly visits run $1,040 to $2,600 nationally. See pool service costs.

Monthly and seasonal tasks

Monthly

  • Test calcium hardness and cyanuric acid (stabilizer). Swim University says test these once a month or when you suspect a problem. CYA climbs steadily if you use chlorine tablets.
  • Clean the filter if pressure has risen 8 to 10 psi over its clean baseline. Swim University's example: with a 10 psi baseline, clean at 20 psi. For DE filters, it suggests backwashing monthly or at 10 psi over normal.
  • Clean the deck, furniture and accessories (Swim University suggests monthly), and rinse debris away from the pool so it does not blow in.
  • Check safety equipment. Drain covers secure and not cracked, ladders and handrails tight, gate latches and alarms working, rescue hook and ring buoy in place.
  • Inspect for leaks. If you are adding more water than evaporation explains, do a bucket test. See pool leak detection.

Spring and fall tune-ups

  • Deep clean cartridges with a filter cleaner or degreaser, or take DE filter grids apart and clean them. Swim University suggests a DE deep clean once or twice a season.
  • Have gas heaters inspected and burner trays cleared of insects and debris. Heat pumps need clear airflow around the coil.
  • Test GFCI devices with the test button. Look for corroded bonding lugs. Electrical repair is for a licensed electrician. See pool electrical and bonding safety.
  • Check light niches and lights for water inside the lens.
  • Inspect tile, coping and the expansion joint between coping and deck. Re-caulk the joint when it cracks so water does not get behind the beam.
  • Look for plaster etching, stains and rough spots. Note them before they spread.

Every few years

  • Swim University says filter sand lasts 3 to 5 years and cartridges 3 to 5 years, with cheap or heavily used cartridges sometimes needing yearly replacement.
  • Replace worn O-rings, valve seals and pressure gauges.
  • Partially drain and refill when calcium, CYA or dissolved solids get very high, timed with your water utility's rules and with groundwater in mind.

How long should I run the pool pump in summer vs winter?

The goal is turnover: moving the whole volume of the pool through the filter. Florida's residential code requires the filtration system to provide a complete turnover in 12 hours or less (FBC R4501.20). Florida public pools need at least four turnovers a day (rule 64E-9.008). Austin's code department points builders to PHTA-15 circulation sizing guidance for residential energy compliance.

Swim University gives these rules of thumb:

Pump typeTypical daily run (Swim University)Texas and Florida summerTexas and Florida winter
Single-speed8 to 10 hoursRun longer in hot weather; add 2 to 4 hours if water turns cloudy or shows algaeOften less, as long as water stays clear; keep freeze protection active in Texas
Variable-speedAt least 12 hours at lower speedsLonger at low speed, short high-speed periods for cleaners and heatersLow speed most of the day; freeze protection when cold

Variable-speed pumps save energy by running slowly for longer. Since September 29, 2025, federal rules require many replacement pool pump motors of 1.15 to 5 total horsepower to be variable-speed (10 CFR 431.485). See the pool pump guide.

Simple way to set run time

  1. Find your pool's gallons and your pump's flow rate (from the pump curve or a flow meter).
  2. Divide gallons by gallons per minute, then by 60, to get hours for one turnover.
  3. Start with at least one turnover a day, then adjust: if the water is clear and chlorine holds, you can try a little less; if it clouds, run more.
  4. Run during the day in summer when chlorine demand is highest, and split the schedule if you have a heater, cleaner or salt cell that needs flow.

What chemicals and supplies do I need?

A basic home pool kit includes:

ItemUseFixr 2025 national material cost
Test kit (liquid or strips)Free chlorine, pH, alkalinity, calcium, CYAabout $15 (basic kit)
Chlorine (tablets, liquid or granular) or salt systemSanitizer$15 to $80
Pool shockAlgae, heavy use, combined chlorine$25 to $50
pH reducer (muriatic or dry acid) and pH increaser (soda ash)Balance pHNot listed
Alkalinity increaser (sodium bicarbonate)Buffer pHNot listed
Calcium increaserRaise calcium (rare in hard-water Texas)Not listed
Stabilizer (cyanuric acid)Protect chlorine from sun$20 to $30
AlgaecidePrevention or stubborn algae$14 to $60
ClarifierMild cloudiness$20 to $30
Metal and stain removerWell water, stains$15 to $40
Skimmer net, brush, vacuumCleaningskimmer about $10, brush about $30, vacuum about $600

Target numbers for each chemical are on our pool water chemistry page. In short: CDC gives a typical home chlorine range of 1 to 4 ppm and pH of 7.0 to 7.8. Swim University's targets are alkalinity 80 to 120 ppm, pH 7.4 to 7.6, free chlorine 1 to 3 ppm, CYA 30 to 50 ppm (60 to 80 for salt), and calcium hardness 225 to 275 ppm for concrete pools or 175 to 225 ppm for vinyl and fiberglass, with salt at 2,800 to 3,200 ppm for salt pools. Always check your salt generator's manual, which may set a different salt range.

Store all of it safely: cool, dry, ventilated, off the floor, out of children's reach, acids away from chlorine. See pool chemical safety and storage.

How often should I test pool water, and how?

CDC's home pool guidance says to check the disinfectant (chlorine or bromine) level and pH at least twice per day, and more often when the pool is in heavy use. Swim University's beginner guide sets at least once a week as the floor for alkalinity, pH and chlorine, with calcium and CYA monthly. In practice, Texas and Florida owners should test free chlorine and pH at least two or three times a week in summer and after every storm or party, and follow CDC's twice-a-day advice on days the pool is busy.

  • Liquid drop kits (DPD or FAS-DPD) give the most exact chlorine readings. Texas and Florida require the DPD method for public pools.
  • Test strips are quick and good for in-between checks.
  • Digital testers and smart monitors are convenient but need calibration; confirm with a kit.
  • Pool store tests give a full panel; test the sample the same day.

Store reagents out of heat. Texas requires public pool test kits and reagents to be protected from extreme heat and cold and replaced on the maker's schedule (25 TAC 265.193); the same logic applies to a kit left in a hot garage.

Should I brush my pool, and how often?

Yes. Swim University says brush at least once a week. Brushing does things a filter and cleaner cannot:

  • knocks loose algae before it forms a visible bloom;
  • removes the slick biofilm where mustard and black algae start;
  • lifts dirt off plaster so it can be filtered;
  • exposes early stains and scale.

Use a nylon brush on vinyl, fiberglass and tile. A stainless steel brush is for plaster only, and mainly for black algae spots. Pay extra attention to steps, benches, behind ladders, corners and shaded walls, where water moves least. A pool with fresh plaster needs extra brushing during its first weeks; follow the plasterer's written startup instructions.

Texas pool maintenance calendar

Texas pools in Houston, San Antonio, Austin and Dallas usually stay open year-round with the pump running, but the work changes with the season. Dates below are general; check local weather.

SeasonWhat happensKey tasks
December to FebruaryCool water, lower chlorine demand; risk of hard freezes, especially in North Texas and the Hill CountryTest weekly; keep freeze protection on; never let the pump sit off during a freeze; check that the heater and freeze sensor work; keep leaves out
March to AprilOak and other tree pollen; warming water; spring windsSkim daily during pollen; clean the filter more often; brush; raise run time as water warms; spring tune-up; check CYA and calcium
May to JuneSwim season starts; thunderstorms and hail in North and Central TexasTest free chlorine and pH two or three times a week; shock after storms; check level after heavy rain
July to AugustPeak heat and evaporation; warm water and high chlorine demand; scale risk in hard waterTest often; run the pump longer; watch calcium and LSI; top off within drought rules; use a cover to cut evaporation
September to OctoberStill hot early; tropical storms possible on the coast; leaf drop beginsHurricane prep on the Gulf Coast; skim leaves; fall tune-up
NovemberLeaf fall peaks; first cold frontsLeaf net or cover; clean baskets often; test freeze protection before the first hard freeze

Texas specifics

  • Hard water. San Antonio Water System reports typical hardness of 15 to 20 grains per gallon from the Edwards and Trinity aquifers (about 257 to 342 ppm). Austin Water's 2025 report shows 70 to 126 ppm. Hard fill water plus evaporation leaves white scale on tile, heaters and salt cells. Keep pH and alkalinity at the low end of their ranges in summer and scrub the waterline weekly.
  • Caliche dust. In the Hill Country and West Texas, wind blows in fine calcium-rich dust that clouds water and adds calcium. Clean the filter after dust storms.
  • Oak pollen. Pollen floats as a yellow film that looks like mustard algae. Pollen skims off; algae clings and returns after brushing.
  • Drought rules. Austin, Dallas, Houston and San Antonio each have stage-based limits on outdoor water, and some limit pool filling. See drought rules for pools.
  • Hail. North Texas hail can tear covers, crack skylights in pool houses and damage solar panels. See hail and freeze damage.

How do I winterize a pool in Texas?

Most Texas pools are not closed for winter the way northern pools are. Instead, owners keep them running and protect them from freezes. Water that freezes in pipes, pumps and filters can crack them. Water in the pool itself rarely freezes solid in Texas, but exposed plumbing at the equipment pad is at risk.

Freeze protection basics

  • Know whether your pump has freeze protection. Federal rules define freeze protection control as a pump control that turns the pump on at a set air temperature to keep water in the pool and plumbing from freezing (10 CFR 431.462). Pumps sold with freeze protection must ship with it disabled or with defaults no higher than 40 degrees F air temperature, a run time of no more than 1 hour before rechecking, and a speed no more than half of maximum (10 CFR 431.465(h)). That means a new pump may arrive with freeze protection turned off. Check the setting before the first cold front.
  • Keep the pump running during a hard freeze. Moving water resists freezing. If your freeze protection runs at a low speed, make sure that speed still moves water through every line, including spa and water feature lines.
  • Plan for power outages. If power fails in a freeze, the pump stops. If an outage is expected, ask your pool professional how to drain the pump, filter and heater and which valves to open. Do not drain the pool itself.
  • Insulate exposed pipes and above-ground valves with foam pipe wrap.
  • Heater. Gas heaters and heat pumps hold water. Follow the maker's instructions for freezing weather.
  • Keep chemicals going. Chlorine demand drops in cold water, but it does not stop. Test weekly.

If you want to close a Texas pool for winter, for example at a second home, hire a pool professional to lower the water, blow out and plug lines, add winter chemicals and install a safety cover. The barrier must stay intact.

Florida pool maintenance calendar

Florida pools from Jacksonville to Miami run all year. The big seasonal swings are rain and storms, not cold. NWS notes that hurricane season begins June 1.

SeasonWhat happensKey tasks
December to FebruaryDry season in South Florida; cool fronts; occasional freezes in North and Central FloridaTest weekly; shorter pump runs if water stays clear; protect equipment if a freeze is forecast in Jacksonville, Tallahassee or Orlando
March to MayWarming water; oak pollen in North and Central Florida; late dry seasonIncrease testing and run time; clean the filter often during pollen; spring tune-up
June to SeptemberRainy season and hurricane season; daily storms; heat; algae pressureTest after storms; shock after heavy rain; lower water after overflow; trim landscaping; have a hurricane plan
October to NovemberLate hurricane season; rain easesPost-storm cleanups; fall tune-up; check enclosures and screens

Florida specifics

  • Rain dilution and pH swings. Heavy storms dilute chlorine, alkalinity, calcium and stabilizer, and wash in fertilizer and dirt. After a big storm, lower the level to mid-skimmer, test, and add chlorine first.
  • Algae and phosphates. Lawn fertilizer runoff and plant debris feed algae. Keep chlorine up; a phosphate remover is optional.
  • Screen enclosures. Many Florida pools sit inside aluminum screen enclosures. Hose off screens and frames to remove pollen and mildew, check for torn panels that let in leaves and lizards, and keep the screen door self-closing if the enclosure is your pool barrier. Florida's residential code allows a standard screen enclosure to serve as all or part of the barrier (FBC R4501.17.1.11). See screen pool enclosures.
  • High groundwater. Much of Florida has a shallow water table. Never drain a pool without a professional check of the hydrostatic relief valve; the code requires a relief device in areas of anticipated water table (FBC R4501.21.4).
  • Hurricanes. See hurricane prep for pools: keep the pool full, turn off power to equipment, remove loose items, and do not drain.

Do Florida pools need winterizing?

Generally no. South Florida pools rarely face freezing weather, and most Florida owners keep pools open and running all winter. North and Central Florida do get occasional freezes. When a freeze is forecast in Jacksonville, Gainesville or Orlando:

  • make sure the pump's freeze protection is enabled (new pumps may ship with it off under the federal default rule);
  • keep the pump running through the cold hours;
  • cover or insulate exposed pipes and the heat pump if the maker allows;
  • turn off solar heating panels or drain them if the maker says to.

Cooler water does mean lower chlorine demand and less algae growth, so winter is a good time to catch up on deep cleaning, filter replacement and small repairs.

How do I maintain a pool during Texas pollen and oak season?

In spring, pollen from oaks and other trees coats Texas pools in a yellow-green film. It clogs filters and feeds algae, and it is easy to mistake for mustard algae.

  1. Skim daily, or use a skimmer sock in the basket to catch fine pollen. Swim University suggests checking a skimmer sock every other day.
  2. Run the pump longer so the skimmer keeps pulling the surface film.
  3. Clean the filter more often. Watch the pressure gauge; pollen loads cartridges quickly.
  4. Keep chlorine up. Organic debris uses chlorine.
  5. Tell pollen from algae: brush a yellow patch. If it disappears and stays gone, it was pollen or dust. If it comes back in a day or two in the same shady spot, it is mustard algae. See algae types.
  6. Use a cover when the pool is not in use during heavy pollen weeks.

How do I maintain a pool during Florida's rainy season?

  • Before a storm: make sure chlorine is at the upper part of your normal range so the pool can absorb the dilution and debris.
  • After a storm: empty baskets, skim, lower the water level if it is above the skimmer (follow local drainage rules), test free chlorine, pH and alkalinity, and add chlorine first.
  • Watch alkalinity. Repeated rain dilution lowers alkalinity and lets pH swing. Add sodium bicarbonate as needed.
  • Watch stabilizer. Overflow carries CYA away. A salt pool may also lose salt. Test monthly in summer.
  • Keep drains and the deck clear. Deck drains clogged with leaves send dirty runoff into the pool.
  • Lightning: clear the pool at the first thunder. Do not service equipment during storms.

What should I do to my pool before a vacation?

  1. Balance the water a day or two before you leave and set free chlorine to the upper part of your normal range.
  2. Clean everything: brush, vacuum, empty baskets, clean the filter.
  3. Check the pump schedule and add a little run time to cover heat and storms. Confirm the timer is right.
  4. Chlorine feeder: fill a floater or inline chlorinator, or check the salt cell output. Do not overload a floater, and remove it if it might sit against a wall and bleach plaster.
  5. Top off the water to the upper skimmer level if your utility's drought stage allows.
  6. Secure the pool: lock gates, set door alarms, put a safety cover on if you have one, and put away floats and toys.
  7. Arrange a check-in. For trips longer than a week, ask a neighbor or service to look at the pool and empty baskets, especially in rainy season or hurricane season.
  8. Hurricane season: if you will be away from June to November in Florida or on the Texas coast, leave instructions for storm prep.

Pool startup after construction or resurfacing

The first weeks after a new pool is filled, or after resurfacing, decide how long the finish lasts. Plaster, quartz and pebble finishes are cement-based and keep curing after the pool is filled. During startup, cement dust ("plaster dust") comes out of the surface, pH and alkalinity rise, and the water must be carefully balanced to avoid scale, streaks or etching.

  • Get the startup plan in writing. Your builder or plasterer should give you their startup procedure, including brushing frequency, when to add chlorine and salt, when heaters may be used, and when you can swim. Following it may be a condition of the finish warranty.
  • Inspections before filling in Florida. The Florida residential code requires final electrical and barrier inspections before the pool is filled, except vinyl liner and fiberglass pools, which must be filled on installation (FBC R4501.19). See pool permits and inspections.
  • Fill without stopping. A plaster pool is usually filled continuously so a ring does not form at a stopped water line. In a drought, confirm the fill is allowed before plastering.
  • Brush often. Startup brushing removes plaster dust before it hardens.
  • Hold off on some chemicals. Many startup procedures delay adding chlorine, salt or stabilizer for days. Follow your plasterer, not a generic chart.
  • Know your new equipment. Ask for manuals and a walk-through of the pump schedule, freeze protection, salt cell, heater and automation.

More on finishes and their care: pool resurfacing and finishes. More on the build: pool construction timeline.

Equipment care: filter, pump, heater, salt cell and cleaner

Filter

Write down the pressure reading right after a cleaning; that is your baseline. Clean when pressure rises 8 to 10 psi above it (Swim University). Sand filters are backwashed; cartridge filters are removed and hosed off; DE filters are backwashed and recharged with fresh DE, with a full teardown once or twice a season. Backwash water counts toward water waste rules in some Texas drought stages, so do not backwash more than needed. See sand vs cartridge vs DE filters.

Pump

Empty the pump basket weekly. Keep the lid O-ring clean and lightly lubricated with a product the maker approves. Listen for bearing noise. Keep the motor dry and leaves away from vents.

Salt cell

Swim University says inspect and clean the salt cell every 3 months. In hard-water Texas, scale forms faster; check more often. Use the cleaning method the maker specifies, usually a mild acid solution, and handle acid safely.

Heater and heat pump

Have gas heaters inspected yearly. Low pH corrodes heater exchangers, and high calcium scales them. Keep plants and debris away from heat pump coils. See pool heaters and heat pumps.

Automatic cleaners and automation

Empty robotic cleaner filters after each run, check suction cleaner hoses for cracks, and keep the cleaner's schedule tied to pump run time. Update automation apps and check that sensors read correctly. See pool automation.

Maintenance by pool type: concrete, fiberglass and vinyl

Pool typeExtra careWatch for
Concrete (plaster, quartz, pebble)More brushing; careful calcium and pH control; occasional acid or chlorine washEtching from low pH, scale from high calcium, black algae in rough spots, cracks
FiberglassSoft brush only; avoid abrasive cleaners; keep calcium and metals in checkStaining, gelcoat fading, cobalt spots
Vinyl linerSoft brush; never let chlorine products sit on the liner; keep water level upWrinkles, fading, tears, liner floating if water is lowered

Fixr's 2025 guide notes that concrete pools require more frequent chemical balancing, acid washing and brushing, because the rough, porous surface collects and grows algae. Fixr lists acid washes at $350 to $550 and chlorine washes at $300 to $500 nationally. Swim University sets different calcium hardness targets by type: 225 to 275 ppm for concrete and 175 to 225 ppm for vinyl and fiberglass. See gunite vs fiberglass vs vinyl.

Safety checks belong in the maintenance schedule

  • Barriers and gates (monthly). Gates must self-close and self-latch. Florida's chapter 515 requires gates that open outward, self-close and have a self-latching device with the release on the pool side out of a young child's reach. In Texas, Health and Safety Code chapter 757 governs pool enclosures only at apartment complexes, condominiums and HOA-owned pools; a single-family backyard pool follows the barrier rules in the city's adopted pool code (since September 1, 2020, the 2019 ISPSC or a newer edition the city has adopted). See Florida barrier law and Texas barrier law.
  • Drain covers (monthly). Look for cracks, missing screws and covers past their marked service life. Federal law requires drain covers made or sold in the U.S. to meet the entrapment standard now incorporated as ANSI/APSP/ICC-16 2017 (16 CFR 1450.3). See pool drain safety.
  • Alarms (monthly). Test door, gate and pool alarms. Florida exit alarms must be at least 85 dBA at 10 feet.
  • Electrical (twice a year). Test GFCIs, look for damaged cords, and keep extension cords away from the water. Texas public pools may not use extension cords within 6 feet of the pool without GFCI protection.
  • Rescue gear. Keep a reaching pole and ring buoy by the pool and a phone nearby.

See layers of protection.

DIY or hire a pool service?

Fixr's 2025 cost guide puts typical maintenance at $350 to $1,050, with most homeowners paying around $500 for monthly service during summer. Its annual contract prices are: seasonal $350 to $1,050, monthly $360 to $1,080, opening and closing $450 to $650, and weekly $1,040 to $2,600. These are national figures; Texas and Florida pools run all year, so year-round weekly service is the common contract here.

  • DIY works well if you can test and adjust several times a week, brush and vacuum weekly, and handle chemicals safely.
  • Service makes sense if you travel, have a large or tree-covered pool, or want equipment checked by a pro.
  • Hybrid: many owners do daily skimming and testing and pay for monthly equipment and chemistry checks.

Licensing: in Florida, routine pool cleaning that does not affect structural integrity and water treatment that needs no permanently attached equipment do not require a contractor license, but installing or replacing permanently attached equipment does, as do refinishing and draining a pool for repair (s. 489.105). In Texas, there is no statewide pool builder or service license from TDLR, but electrical work on pool equipment requires a TDLR license. See how to choose a pool service.

Keep a pool log

Public pools in Texas must keep chemical test logs for at least three years, and Florida public pools must keep daily records at the pool. A home owner is not required to, but a simple log pays off:

  • it shows slow trends, such as CYA or calcium creeping up;
  • it helps a service tech or leak detector diagnose problems;
  • it documents care if you need to make a warranty or insurance claim;
  • it is useful to a buyer when you sell the home.

Record the date, free and total chlorine, pH, alkalinity, calcium, CYA, salt (if used), filter pressure, water added, chemicals added, and any repairs.

City notes: what changes in Houston, Dallas, Austin, San Antonio, Miami, Tampa, Orlando and Jacksonville

CityMaintenance pressure pointsWater rules to know
HoustonHumidity, heavy rain and tropical storms; clay soils that hold water after storms; long swim seasonHouston's 2024 drought plan lists filling or adding water to pools as a non-essential use; Stage II limits outdoor use to set days; Stage III caps homes at 5,000 gallons a month
DallasHard freezes some winters; spring hail; summer evaporationDallas Stage 3 bans draining and refilling existing pools except for structural, maintenance or safety needs, but allows top-offs for evaporation
AustinHeavy spring oak pollen; summer heat; occasional freezesAustin bars new single-family pool permits in Stage 4 and bans adding water to pools in Emergency Stage 5; Austin Water's 2025 report lists hardness of 70 to 126 ppm
San AntonioVery hard water and scale; summer heat; caliche dust on the edges of the metroSAWS stages follow the Edwards Aquifer (Stage 1 at 660 feet, Stage 2 at 650, Stage 3 at 640); SAWS reports hardness of 15 to 20 grains per gallon
MiamiYear-round swimming; daily summer storms; high groundwater; mosquitoesSFWMD year-round rule limits landscape irrigation, not pool filling; Miami-Dade takes mosquito inspection requests through 311
TampaFrequent summer lightning and storms; high water table; hurricane exposureSWFWMD rule 40D-22.201 bans letting water flow from an unattended hose, so stay with a hose when topping off
OrlandoOak pollen in spring; summer storms; screened enclosures commonServed by SJRWMD or SFWMD depending on location; check your utility's watering days
JacksonvilleOccasional hard freezes; pollen; coastal stormsSJRWMD watering rules; protect equipment when freezes are forecast

For local detail, see the Texas pool guide, the Houston guide and the Florida pool guide.

Saltwater pool maintenance schedule

A saltwater pool is a chlorine pool. The salt cell makes chlorine from dissolved salt, so you still test and balance the water, and you add a few tasks:

  • Weekly: test free chlorine and pH. Salt cells tend to push pH up, so many salt pools need acid every week.
  • Monthly: test salt, CYA and calcium. Swim University suggests 2,800 to 3,200 ppm salt and 60 to 80 ppm CYA for salt pools, but use the range in your generator's manual.
  • Every 3 months: inspect and clean the cell (Swim University), more often in hard-water Texas where scale builds fast.
  • After heavy rain: salt and CYA drop from dilution and overflow; retest before adding salt.
  • When water is cold: many cells reduce output or shut off at low water temperatures; check the manual and add liquid chlorine if needed in winter.
  • Corrosion watch: salt water can attack some natural stone, metal fixtures and deck furniture. Rinse salt residue off coping and decks.

More: saltwater pool systems.

Pool and spa combinations

Many Texas and Florida pools have an attached spa that shares water and equipment. The spa runs hotter, so chlorine burns off faster and scale forms sooner. CDC's guidance for public hot tubs calls for at least 3 ppm free chlorine, or 4 ppm bromine, with pH 7.0 to 7.8, and Florida requires 2 to 5 mg/L free chlorine in public spas (rule 64E-9.004). Its CYA cap for spas is 40 mg/L, lower than for pools.

  • Test the spa separately when it runs as its own body of water.
  • After heavy spa use, add chlorine and let the spillover return water to the pool.
  • Clean the spa's own skimmer or suction screens.
  • Check spa jets and air blowers twice a year.
  • Keep the spa cover locked if it is the spa's safety barrier.

See hot tubs and spas.

Maintenance rules for HOA, condo, apartment and rental pools

Shared pools are often regulated as public pools, which brings legal maintenance duties.

Florida

  • A public pool includes pools serving five or more living units, such as apartments, condos, hotels, mobile home parks and townhouse developments (chapter 514).
  • Pools at condos or cooperatives with 32 or fewer units, and HOA pools with 32 or fewer units or parcels, are exempt from most Department of Health supervision but still must meet water quality rules.
  • Public pool service technicians must complete a DOH-approved course of at least 16 hours and pass a test; owners and their direct employees may operate a pool without certification. Licensed pool/spa contractors are deemed certified.
  • Operators must test pH and disinfectant at least once every 24 hours, test CYA weekly when stabilized chlorine is used, and keep records at the pool (64E-9.004).

Texas

  • DSHS classes apartment, HOA and hotel pools as Class C pools.
  • Class C pools with on-site staff test disinfectant and pH at least three times a day; those without staff at least once a day. Alkalinity, calcium and a balance test such as LSI are required at least every 10 days. Logs must be kept at least three years (25 TAC 265.193).
  • Cities and counties may require operating permits and inspect public pools (Health and Safety Code chapter 341).

More: HOA, condo and apartment pool management, Florida public pool rules and Texas public pool rules.

Common pool maintenance mistakes

  1. Pouring chemicals into the skimmer. Concentrated chemicals pass through the pump, filter and heater undiluted and can damage them, and mixed products can react in the lines. Texas bans dispensing chemicals through skimmers at public pools (25 TAC 265.193(m)).
  2. Mixing chemicals. Never mix chlorine products with acid or with other chlorine types. Add one at a time, directly to the pool water, following the label.
  3. Relying only on tablets. Trichlor tablets add cyanuric acid. Over a long summer, CYA climbs until chlorine stops working well.
  4. Running the pump too little. Saving power by cutting run time below one turnover a day often costs more in chemicals and algae cleanups. Use a variable-speed pump at low speed instead.
  5. Shocking at midday. Sun destroys unstabilized chlorine. Shock at dusk.
  6. Ignoring the filter gauge. Clean the filter when pressure rises 8 to 10 psi above baseline, not on a random schedule.
  7. Backwashing too often. It wastes water and can make sand filters less effective. Backwash only when the gauge says so.
  8. Old test reagents. Expired or heat-damaged reagents give false readings.
  9. Draining without checking groundwater. An empty pool in high groundwater can crack or float.
  10. Skipping safety checks. A propped-open gate defeats the barrier. Check gates and alarms monthly.

Water level, evaporation and when to suspect a leak

All pools lose water to evaporation, splash-out and backwashing. Texas summer heat and wind can drop the level noticeably in a week. If you are adding more water than seems normal, do a bucket test:

  1. Fill a bucket with pool water and set it on a pool step so the water inside is at the same level as the pool.
  2. Mark the water level inside the bucket and the pool level outside it.
  3. Run the pump on its normal schedule for 24 hours, then compare.
  4. If the pool drops more than the bucket, you likely have a leak.

A leak wastes water that drought rules may forbid you to replace, and failing to repair a controllable leak is water waste under Austin, Houston and San Antonio rules. See pool leak detection.

After heavy rain, lower an overfilled pool to mid-skimmer. Use the filter's waste setting or a submersible pump, and send the water where local rules allow, never across a neighbor's yard or into the street without checking.

Tile, waterline scale and stains

The waterline is where Texas and Florida pools show their age first. Evaporation leaves minerals behind at the surface, and body oils and sunscreen stick to the tile.

White crust (calcium scale)

Hard fill water, high pH and high alkalinity push calcium out of solution. In San Antonio, where SAWS reports typical hardness of 15 to 20 grains per gallon, scale is a constant battle. Prevent it by keeping pH and alkalinity at the low end of their ranges in summer, scrubbing the tile line weekly, and using a scale inhibitor if your pool store recommends one. Hard, glassy deposits that do not come off with a tile brush may need a pro with a pumice stone or bead blasting.

Brown, green or blue stains

Metal stains come from iron or copper in well water, copper algaecides, or corroded heater parts. Organic stains come from leaves, berries and algae and usually lighten when chlorine touches them. To tell them apart, hold a chlorine tablet in a sock against the stain for a short time (on plaster only): if it lightens, it is organic; if not, it may be metal. Metal stains call for a metal sequestrant or stain treatment.

Gray film and oily ring

Sunscreen, lotion and body oils leave a ring that collects dirt. Wipe it with a tile cleaner made for pools; household cleaners can foam or upset the water. A skimmer sponge that absorbs oil helps in busy summer weeks.

If stains and rough spots keep spreading, the finish itself may be failing. See pool resurfacing.

What a weekly pool service visit should include

If you hire weekly service, compare quotes against a written list. A typical full-service visit covers:

  • testing free chlorine, pH and alkalinity, and adding chemicals;
  • monthly testing of calcium, CYA and salt;
  • skimming, brushing walls and steps, and vacuuming or checking the automatic cleaner;
  • emptying skimmer and pump baskets;
  • checking filter pressure and cleaning or backwashing on a stated schedule;
  • a look at the equipment for leaks, noise and error codes;
  • a written or app report of readings and chemicals added.

Ask what is extra: chemicals, filter cleans, green-pool cleanups, salt, repairs. Ask whether they will report a broken gate latch or a cracked drain cover. Fixr's 2025 guide puts annual weekly-visit contracts at $1,040 to $2,600 nationally. In Florida, equipment replacement, refinishing and draining for repair require a licensed pool/spa contractor under s. 489.105, so ask whether the company holds a CPC or RPC license if it offers those services. See pool service costs and contracts.

Energy-smart maintenance

  • Variable-speed pump at low speed. DOE defines a variable-speed pool pump as one whose lowest speed is no more than one-third of its maximum. Long, slow runs filter well and use less energy than short, fast runs. Federal rules now require many replacement pool pump motors to be variable-speed. See the pool pump guide.
  • Timers. Federal rules require integral cartridge-filter and sand-filter pumps made since July 19, 2021 to be sold with a pool pump timer. Use it.
  • Clean filter, clean baskets. A clogged basket or filter makes the pump work harder for less flow.
  • Cover. A cover cuts evaporation and heat loss, so heaters run less and you add less water.
  • Heater settings. Lower the set point when the pool is not in use, and shut the heater off for trips.

More: pool energy and water use.

Hurricane and tropical storm season maintenance

NWS says hurricane season begins June 1 and the best time to prepare is before it starts. For pool owners on the Texas coast and across Florida, storm season adds a short checklist to the regular routine:

  • Before the season: trim trees, check that the equipment pad is anchored and above likely flood levels, and know where the pool breaker is.
  • Before a storm: keep the pool full (do not drain it, because the water helps hold the shell in the ground), bring in furniture and toys, raise chlorine, and turn off power to the equipment when the storm approaches.
  • After a storm: stay out of the water until debris is removed and equipment is checked; have flooded electrical equipment inspected before restoring power; repair barriers before anyone uses the pool.

Full detail: hurricane prep for pools.

Maintenance records when you sell or buy a home

A buyer's inspector will look at water clarity, equipment age and condition, visible cracks and the safety barrier. Sellers who keep a pool log, equipment receipts and service records can answer questions quickly. Buyers should ask for the last year of service records, the age of the pump, filter, heater and salt cell, the date of the last resurfacing, and any leak repairs. A green or empty pool at showing time hides problems. See buying a home with a pool.

Reopening a pool that sat unused

Second homes, vacant rentals and pools closed for a remodel need a careful restart. Fixr's 2025 guide lists spring cleaning at $375 to $500 and opening and closing contracts at $450 to $650 a year nationally, if you want a pro to do it.

  1. Safety first. Check the barrier, gate latches and alarms before anyone goes near the water. Check drain covers for cracks.
  2. Remove the cover without dumping the water and debris on top into the pool. Pump it off first.
  3. Inspect equipment. Look for cracked pump housings or filter tanks (especially after a Texas freeze), wasp nests in heaters, and rodent damage to wiring. Have a licensed electrician check anything that looks damaged.
  4. Restore water level to mid-skimmer, within drought rules.
  5. Start the pump, prime it, and check for leaks at unions and valves.
  6. Clean the filter and empty baskets.
  7. Test the full panel: free chlorine, pH, alkalinity, calcium, CYA and salt.
  8. Balance, then shock, and run the filter around the clock until the water is clear. If it is green, follow our green pool guide.

Your first year: a learning plan for new pool owners

  • Month 1: learn your equipment. Find the pump, filter, valves, breaker, freeze protection setting and the pool's gallons. Write down the filter's clean pressure. If the pool is new, follow the builder's startup procedure exactly.
  • Months 1 to 3: test often, even daily, to learn how fast your pool uses chlorine in sun, rain and heavy use. Keep a log.
  • First summer: watch CYA if you use tablets, and calcium if you live in hard-water Texas. Learn your shock routine after storms.
  • First fall and winter: in Texas, confirm freeze protection works before the first hard freeze. In Florida, use the cooler months for deep cleaning and small repairs.
  • End of year: review your log and costs. Decide whether to keep doing it yourself, switch to service, or mix the two.

Most problems in a first year come from three things: chlorine that ran out during a hot spell or storm, a filter that was never cleaned, and stabilizer that climbed too high. A simple log catches all three.

How to choose a provider

  • Write down your pool's gallons, pump flow rate and filter clean-pressure baseline.
  • Set the pump to at least one full turnover a day and adjust by season.
  • Test free chlorine and pH several times a week in summer; alkalinity weekly; calcium and CYA monthly.
  • Skim every other day; brush, vacuum and empty baskets weekly.
  • Clean the filter when pressure rises 8 to 10 psi over baseline.
  • Texas: confirm freeze protection is on before the first cold front.
  • Florida: test and rechlorinate after every heavy rain.
  • Check gates, alarms and drain covers monthly.
  • Do a spring and fall tune-up of filter, heater and electrical safety devices.
  • Keep a pool log of tests, chemicals and water added.
  • Never drain a pool without checking groundwater and the hydrostatic relief valve.

Related swimming pool builders and contractors guides

Swimming pool builders and contractors by state and city

Questions people ask

How much time does pool maintenance take each week?

It depends on pool size, trees, equipment and season. Testing and adjusting chemicals takes only minutes. Brushing, vacuuming and cleaning baskets take most of the time, and an open Texas pool under live oaks needs far more skimming than a screened Florida pool with a robotic cleaner. Automation and a salt system cut chemical chores but not brushing. Track your own time for a month; if you fall behind, weekly service may be worth it.

When should I replace filter sand or cartridges?

Swim University says filter sand usually lasts 3 to 5 years, or less if it clumps or turns greasy, and cartridges last 3 to 5 years, though heavy use or cheap cartridges may need yearly replacement. Replace sooner if the filter will not hold pressure down after cleaning, the water stays hazy with good chemistry, or cartridge pleats are torn or flattened.

Do I need to drain my pool every year?

No. Most Texas and Florida pools are drained only for repairs, resurfacing, or when calcium, stabilizer or dissolved solids get too high to fix by partial dilution. Draining wastes water, may be limited by drought rules, and can crack or float a pool in high groundwater. Fixr notes a full drain and clean is rarely needed. When it is, have a pro check the hydrostatic relief valve first.

How often should I shock my pool?

There is no fixed rule. Swim University's guide gives no set interval for chlorine shock and suggests using it for algae, cloudy water or heavy use. Shock when combined chlorine is high or the pool smells of chlorine, after parties and storms, and whenever algae appears. In Texas and Florida summers, many owners shock weekly or after every heavy rain.

Can I swim right after adding chemicals?

Wait until chemicals have mixed and levels are back in range. Florida requires public pools to close during manual chemical addition and for at least 1 hour after, longer if needed for safe mixing. Swim University says swimming is fine about 15 minutes after non-chlorine shock. After chlorine shock, wait until free chlorine is back near your normal level.

Should I use a pool cover?

A cover cuts evaporation, keeps out leaves and pollen, and reduces heat loss, which saves water and chemicals. That is why SAWS required partial covering of private pools during its 2024 Stage 3. A solar or debris cover is not a safety cover. Only a cover meeting ASTM F1346 counts as a safety feature under Florida's chapter 515. Remove any cover fully before anyone swims.

Can I run my pool pump at night?

Yes, and many utilities charge less at night, but chlorine demand is highest during sunny afternoons, and skimmers work best when debris is falling in during the day. A common approach is to run a variable-speed pump at low speed for long periods, including part of the day, with short high-speed periods for the cleaner or heater. In Texas winters, keep freeze protection on overnight.

How do I keep leaves out of my pool?

Trim branches over the water, use a leaf net or debris cover in fall and spring, empty skimmer baskets often, and use an automatic cleaner with a large debris bag. In Florida, screened enclosures keep most leaves out but need their own cleaning. Rotting leaves stain plaster and use up chlorine, so skim them before they sink.

What is the pool turnover rate?

Turnover is the time it takes for a volume of water equal to the whole pool to pass through the filter. Florida's residential code requires filtration able to turn over the pool in 12 hours or less, and Florida public pools need at least four turnovers a day. Divide your pool's gallons by the pump's gallons per minute, then by 60, to get hours per turnover.

How do I maintain a pool myself?

Follow three jobs: circulation, cleaning and chemistry. Run the pump long enough to turn the water over at least once a day. Skim every other day, and brush, vacuum and empty baskets weekly. Test free chlorine and pH several times a week in Texas and Florida summers, and alkalinity weekly. Test calcium and stabilizer monthly. Clean the filter when pressure rises 8 to 10 psi over its clean reading.

How often should I clean my pool?

Swim University suggests skimming every other day and brushing, vacuuming and emptying skimmer and pump baskets at least once a week. Add extra skimming and filter cleaning during Texas pollen season and after Florida storms. Deep clean filter cartridges or DE grids once or twice a season, and clean the deck and accessories monthly.

How long should I run the pump in summer vs winter?

Aim for at least one full turnover a day. Swim University suggests 8 to 10 hours for a single-speed pump and at least 12 hours at lower speed for a variable-speed pump, with more in hot weather and 2 to 4 extra hours if water clouds. Florida's residential code requires filtration able to turn over the water in 12 hours or less. In winter, you can often run less if the water stays clear, but keep freeze protection on in Texas.

What chemicals do I need for a pool?

You need a sanitizer (chlorine tablets, liquid or granular, or a salt system), shock, a pH reducer such as muriatic or dry acid, a pH increaser such as soda ash, an alkalinity increaser (sodium bicarbonate), stabilizer (cyanuric acid), and a good test kit. Optional items include algaecide, clarifier, and metal and stain remover. Fixr's 2025 guide lists shock at $25 to $50 and chlorine at $15 to $80 nationally.

How often should I test pool water?

CDC advises home pool owners to check chlorine and pH at least twice a day, and more often with heavy use. Swim University sets once a week as the minimum for chlorine, pH and alkalinity, with calcium and stabilizer monthly. In Texas and Florida summers, test free chlorine and pH at least two or three times a week and after storms and parties.

How do I winterize a pool in Texas?

Most Texas pools stay open and running. Make sure the pump's freeze protection is turned on, because federal rules let new pumps ship with it disabled. Keep the pump running through hard freezes, insulate exposed pipes and valves, and follow the heater maker's freeze instructions. If a power outage is likely during a freeze, ask a pool pro how to drain the pump, filter and heater. Do not drain the pool.

Do Florida pools need winterizing?

Generally no. Most Florida pools stay open and running all year. In North and Central Florida, prepare for occasional freezes by enabling the pump's freeze protection, keeping the pump running through cold nights and protecting exposed pipes and solar panels as the maker directs. Winter's lower chlorine demand is a good time for filter replacement and repairs.

What should I do to my pool before a vacation?

Balance the water and set chlorine at the upper part of your normal range, brush, vacuum and clean the filter, and confirm the pump timer. Fill the chlorinator or check the salt cell, top off the water if drought rules allow, and lock gates and alarms. For trips over a week, especially in rainy or hurricane season, arrange for someone to check the pool and empty baskets.

What is a pool startup after construction?

Startup is the process of filling a new or resurfaced pool and caring for it during its first weeks, while a cement-based finish cures and releases plaster dust. It involves frequent brushing and careful pH and alkalinity control, with chlorine, salt and heaters often delayed. Get your plasterer's written startup procedure and follow it, since the finish warranty may depend on it.

How much does pool maintenance cost?

Fixr's 2025 cost guide puts pool maintenance at $350 to $1,050 nationally, with most homeowners paying around $500 for monthly summer service. Annual contracts with weekly visits run $1,040 to $2,600. Texas and Florida pools run year-round, so year-round weekly service is common. Chemicals and repairs may be extra, so get the scope in writing.

How high can stabilizer (CYA) get before I should drain some water?

Home pools have no legal cap, so use the public pool rules as an outer limit. Florida's rule 64E-9.004 caps cyanuric acid at 100 mg/L in public pools and recommends no more than 40 mg/L, and Texas bans stabilized chlorine and cyanuric acid in indoor public pools and spas (25 TAC 265.193). Swim University's home targets are 30 to 50 ppm, or 60 to 80 ppm for salt pools. CYA only leaves with water, so replacing about 10 percent of the water lowers it about 10 percent. Check your utility's drought stage and, in Florida, the groundwater level before a partial drain.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration