Local Guide · Roofing
Slate, Cedar Shake and Synthetic Roofs: Are They Practical in Texas or Florida?
What slate, wood shake and composite roofs weigh, how they handle fire, wind and hail, what Texas and Florida codes and insurers require, and how to verify synthetic product approvals.
Slate, cedar and synthetic roofs can work in Texas and Florida, with limits. Slate lasts 50 to 100+ years but weighs about 9 to 19 pounds per square foot and can crack in hail, so an engineer should check the framing. Wood shakes face fire, decay and insurance hurdles and stricter Florida rules. Synthetic slate and shake are light, but ratings and approvals belong to specific product lines and must be verified.
Key facts
- Quarter-inch slate weighs about 9.35 lb per sq ft and half-inch about 18.7 (National Slate Association).
- NRCA figures list slate at 50-100 years and wood shingles and shakes at 15-30 years.
- The IRC requires slate slopes of 4:12 or more and wood shingles or shakes at 3:12 or more.
- Slate installed over underlayment on a combustible deck is a Class A roof assembly under the IRC.
- Florida does not permit a full-deck self-adhered underlayment or D8257 synthetic underlayment under wood shingles or shakes.
- In the HVHZ, no recover may be installed over existing wood shingles, shakes, slate, tile or metal shingles (FBC 1521.16).
- InterNACHI lists simulated slate at 10-35 years.
- A Miami-Dade NOA may exclude fire classification; one concrete slate-profile tile NOA states fire classification is not part of the acceptance.
Slate, wood shake and synthetic roofs at a glance
Slate, cedar shakes and their synthetic look-alikes are a small share of roofs in Texas and Florida, found mostly on historic homes, luxury builds and some HOAs. They can work here, but each has a catch: slate is heavy, wood burns and decays, and synthetic products vary widely in what has been tested and approved.
| Material | Published life | Weight | Fire | Key code points |
|---|---|---|---|---|
| Natural slate | NRCA via U.S. Forest Service: 50 to 100 years by grade; InterNACHI: 60 to 150; the National Slate Association says some slates exceed 200 years | About 9.35 lb per sq ft for 1/4-inch slate, 18.7 for 1/2-inch (National Slate Association) | Slate over underlayment on a combustible deck is a Class A assembly under the IRC | Minimum slope 4:12; two fasteners per slate; ASTM C406; no recover over slate |
| Wood shakes and shingles (usually cedar) | NRCA: 15 to 30 years; InterNACHI: about 25 | Light | Untreated wood is not Class A; fire-retardant-treated products must be pressure-treated and labeled with their fire class | Minimum slope 3:12; naturally durable grades per Cedar Shake and Shingle Bureau; spaced sheathing allowed |
| Synthetic or composite slate and shake | InterNACHI lists simulated slate at 10 to 35 years | Usually light; check the spec sheet | Varies by product line (some Class A, some Class C) | Must have its own product approval; ratings apply only to the specific line |
Is a slate roof practical in Texas?
It can be, with three conditions: a structure that can carry the weight, a crew experienced with slate, and a plan for hail.
Weight and structure
The National Slate Association says quarter-inch slate weighs about 935 pounds per 100 square feet (9.35 pounds per square foot) with a standard 3-inch headlap, and half-inch slate about 18.7. It warns that "the loads can be too great for standard post World War II construction" and that if a building never had slate, a licensed structural engineer should evaluate the framing and load path. For comparison, JLC reports asphalt shingles at 2.5 to 4 pounds per square foot. Slate is roughly two to seven times heavier, depending on thickness.
Hail
Slate is stone and can crack from large hail. North Texas and the Hill Country see frequent hail. Before choosing slate, ask your insurer how it rates slate for wind and hail, whether it offers any impact-resistance credit for it, and how it would settle a claim for scattered cracked slates. Texas insurers each set their own impact-resistant roofing rules, and TDI does not endorse products.
Maintenance and repair
Slate is not maintenance-free. The National Slate Association notes that it is "not unusual" for a few slates to crack and slip in the first year or two from hairline cracks created during installation, and that individual slates are replaced with a ripper tool and a matching slate. Slate fines (tiny chips) in gutters in the first months are normal. Finding a qualified slater may take longer in Texas than in the Northeast; the association keeps a contractor list by state.
Code basics
The IRC requires slate to meet ASTM C406, to be installed on solidly sheathed decks at slopes of 4:12 or more, with two fasteners per slate and headlaps of 2 to 4 inches depending on slope. Existing slate may be reinstalled, but cracked or broken slate may not. A new roof cannot be installed over existing slate. Texas cities adopt their own IRC editions over a 2012 statewide minimum.
How heavy is a slate roof compared with tile and shingles?
| Roof covering | Approximate weight (lb per sq ft) | Source |
|---|---|---|
| Asphalt shingles | 2.5 to 4 | JLC |
| Lightweight concrete tile | 5.5 to 7 | JLC |
| Clay tile | About 8 | JLC (UMass Amherst building materials program) |
| Standard concrete tile | 9.5 to 12 | JLC |
| Slate, 1/4 inch | About 9.35 | National Slate Association |
| Slate, 1/2 inch | About 18.7 | National Slate Association |
Weights are for the covering. Add decking, underlayment and battens for total dead load. Switching to a heavier roof needs an engineer's review.
Are cedar shake roofs allowed in Florida?
Yes, the Florida codes include provisions for wood shingles and shakes, and products need Florida Product Approval (and a Miami-Dade NOA in Miami-Dade and Broward). But several rules make them harder to use than other roofs:
- Underlayment. Florida's 8th Edition code lets most steep-slope roofs use a full self-adhered membrane over the whole deck, but that method "is not permitted for wood shingles or shakes," and ASTM D8257 synthetic underlayment is not permitted under wood shingles or shakes either. Wood roofs must use one of the other underlayment methods.
- Sheathing. In the HVHZ, spaced sheathing is approved only for wood shakes and shingles. Where an existing sloped roof has spaced sheathing, the old covering must come off and the deck must be brought to code.
- No recover. Florida requires tear-off when the existing covering is wood shingle or shake. In the HVHZ, no recover is allowed over existing wood shingles or shakes.
- Combustible space. If a new roof goes over wood shingles or shakes where allowed, the code requires covering the old surface with gypsum board, mineral fiber, glass fiber or another approved material to prevent a hidden combustible space.
Florida's heat and humidity are also tough on wood. Published lives for wood roofs (15 to 30 years from NRCA, about 25 from InterNACHI) reflect average climates. Ask any installer about wood species and grade, preservative or fire-retardant treatment, and ventilation under the shakes. The IRC requires a 1/4-inch vented airspace between wood shingles or shakes and the underlayment on unvented attic assemblies.
Do wood shakes raise insurance premiums?
Often they can, and in some areas they can make coverage harder to find, but rules vary by insurer. TDI says roofing materials less likely to be damaged by wind, hail or fire may earn a discount, which also means more vulnerable materials may cost more. Wildfire risk is a growing underwriting factor in parts of Texas, including the Hill Country. Austin's permit exemption for re-roofing does not apply in the Wildland-Urban Interface area when half or more of the roofing is replaced, so expect permit review there.
In Florida, Citizens treats roofs other than tile, slate, concrete or metal under its 25-year documentation threshold, so wood shakes fall with shingles, and private insurers apply the 15-year inspection rule to every material.
Before you buy: ask two or three insurers (or an independent agent) to quote your home with the specific product, including whether a fire-retardant-treated Class A or Class B shake changes the rate. Fire-retardant-treated shakes must be treated by the full-cell vacuum-pressure process, and each bundle labeled with its fire classification and treating company under the IRC.
What are synthetic slate and shake roofs?
Synthetic (composite) slate and shake products are molded from polymers, rubber, recycled materials or blends, shaped and colored to look like stone or wood. Concrete tile made in slate or shake profiles is a separate, heavier category. Synthetics are popular where owners want the look without the weight or the fire and decay problems of wood.
Pros
- Much lighter than natural slate.
- Some lines are marketed with UL 2218 Class 4 impact ratings and Class A fire ratings.
- Easier to cut and install than slate.
Cons and cautions
- Track records are shorter than slate's. InterNACHI lists simulated slate at 10 to 35 years.
- Ratings belong to specific product lines and colors, not the brand as a whole.
- Color fading and appearance over time vary.
- Approvals expire. One composite slate and shake Miami-Dade NOA we reviewed (No. 19-0917.01) showed an expiration date of 12/16/24 and listed fire classification by reference to separate fire listings.
Are composite roofs Class 4 and Miami-Dade approved?
Some are, but you must check each product line. Three separate questions:
- Wind approval. Search the Florida Product Approval system (floridabuilding.org) and, for Miami-Dade and Broward, Miami-Dade Product Control. Confirm the NOA number, the exact product names, the maximum design pressure and the expiration date. Miami-Dade says an NOA is valid only until its expiration date and ends if materials, use or manufacture change, and a full copy must be on the job site.
- Fire rating. An NOA may not cover fire. A Miami-Dade NOA for a concrete slate- and shake-profile tile we reviewed states "fire classification is not part of this acceptance." Ask for the UL 790 (or equivalent) fire listing for your exact product and deck.
- Impact rating. Ask for the UL 2218 or FM 4473 test report and confirm the product is labeled. For a Texas insurance discount, the insurer decides what it accepts; for TWIA's credit, the product must be labeled with its UL 2218 class.
Also ask for the warranty, any hail exclusion, and whether matching replacement pieces will be available for future repairs.
Historic districts and specialty roofs
Many historic homes in Texas and Florida cities had slate, wood or clay tile roofs. If your home is in a local historic district or is a designated landmark, the city's historic preservation office may need to approve a change in roofing material or appearance before a permit issues. Requirements vary by city and district, so call the historic preservation office before ordering material. Our historic district roofing guide covers the approval process and how to ask for an alternative material.
Practical points:
- Get written approval of the exact product and color before signing a contract.
- If you propose a synthetic substitute, bring samples, the product approval and fire rating.
- Keep salvaged slate or tile in good condition; reuse of like-kind material is allowed for repairs.
How to choose a provider
- Have a structural engineer review framing before installing slate or heavy tile.
- Ask your insurer to quote the specific product, including fire class and hail treatment.
- Verify the Florida Product Approval or Miami-Dade NOA number, design pressure and expiration date.
- Get the fire listing and UL 2218 or FM 4473 impact report for the exact product line.
- Confirm underlayment method is allowed for wood roofs in Florida.
- Check with your city's historic preservation office before ordering material.
- Hire an installer experienced with the specific material.
- Keep spare matching pieces for future repairs.
Related roofing guides
- Roofing in a Historic District: Approvals, Materials, and Costs in Texas and Florida
- What Is the Best Roofing Material for Texas Hail, Heat and Hurricanes?
- What Is the Best Roofing Material for Florida: Shingles, Tile or Metal?
- Tile Roofs in Florida: Is It the Tile or the Underlayment, and What Do Re-Roofs Involve?
- Hail Damage on Your Roof: How to Spot It, Prove It, and Claim It in Texas
- Florida Building Code for Roofs: HVHZ, Miami-Dade NOAs, and the 2026 9th Edition Changes
- Does Homeowners Insurance Cover Roof Replacement? The Plain-English Answer for Texas and Florida
Roofing by state and city
Questions people ask
Is a slate roof good in Texas?
It can be if the framing can carry the weight and you plan for hail. Quarter-inch slate weighs about 9.35 pounds per square foot, roughly three times asphalt shingles, so an engineer should check any house not built for slate. Large hail can crack slate. Ask your insurer how it rates and settles slate claims, and hire an experienced slater.
Are cedar shake roofs allowed in Florida?
Yes. Florida's codes include wood shingle and shake provisions, and products need Florida Product Approval, plus a Miami-Dade NOA in Miami-Dade and Broward. Rules are stricter: a full self-adhered underlayment and D8257 synthetic underlayment are not permitted under wood, recovering over wood is not allowed, and spaced sheathing is limited. Heat and humidity also shorten wood roof life.
What are synthetic slate and shake roofs?
They are polymer, rubber or composite shingles molded to look like slate or wood shake. They weigh far less than slate and some lines are marketed with Class 4 impact and Class A fire ratings. Track records are shorter, ratings apply only to specific product lines, and approvals expire, so verify current approvals and test reports for the exact product.
Do wood shakes raise insurance premiums?
They can. TDI notes that materials less likely to be damaged by wind, hail or fire may earn discounts, so more vulnerable roofs may cost more to insure, and wildfire risk is a growing factor in parts of Texas. Rules vary by insurer. Get quotes for the specific product, including fire-retardant-treated options, before deciding.
How heavy is a slate roof?
The National Slate Association puts quarter-inch slate at about 935 pounds per 100 square feet with a 3-inch headlap, and half-inch slate at about 18.7 pounds per square foot. That is heavier than standard concrete tile at the thicker end. Houses not built for slate need a structural engineer's evaluation before installation.
Are composite roofs Class 4 and Miami-Dade approved?
Some product lines are, but not all, and approvals are tied to specific products and expire. Check the Florida Product Approval and Miami-Dade Product Control listings for the NOA number, design pressure and expiration date. Ask separately for the fire listing and the UL 2218 impact test, because a wind NOA may not cover fire or hail.
Sources
- National Slate Association: common myths about slate roofing
- Roof life expectancies attributed to NRCA (U.S. Forest Service)
- InterNACHI Standard Estimated Life Expectancy Chart
- 2021 IRC Chapter 9 Roof Assemblies, Texas (UpCodes)
- 2021 IRC Chapter 8 Roof-Ceiling Construction, Texas (UpCodes)
- 2023 Florida Building Code, Building, Chapter 15 (UpCodes)
- 2023 Florida Existing Building Code Chapter 7 (UpCodes)
- FRSA: New 2023 FBC 8th Edition is now in effect
- JLC: Roofing with concrete tile
- JLC: Heavy roof loads from tile
- Miami-Dade NOA 19-0917.01 (composite slate and shake)
- Miami-Dade NOA 24-0320.03 (concrete slate and shake profile tile)
- Miami-Dade NOA 24-0625.12 (NOA validity and job-site rules)
- TDI: Replacing your roof
- TDI: Roofing discounts for impact-resistant roofs
- Austin: work exempt from building permits
- Citizens: required document updates and roof requirements
- Fla. Stat. s. 627.7011
- Texas Local Government Code ch. 214
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


