Local Guide · Roofing
What Is the Best Roofing Material for Texas Hail, Heat and Hurricanes?
Texas roofs face more major hail than any other state, plus Gulf hurricanes and long summers. Here is what UL 2218 Class 4 really means, what IBHS testing shows about impact-resistant shingles, how metal handles hail, and how insurance discounts work.
For most of Texas, the best roof is one with a UL 2218 Class 4 impact rating, and among asphalt shingles, a product rated Good or Excellent by IBHS, which outperforms typical Class 4 shingles against realistic hail. Metal resists hail leaks but can dent, and insurers may exclude cosmetic damage. On the Gulf Coast, add top wind ratings and a sealed deck. Insurance discounts vary by company, so get the dollar figure first.
Key facts
- Texas led the U.S. with 902 major hail events (1 inch or larger) in 2025 (Insurance Information Institute, citing NOAA SPC).
- NOAA confirmed a 7.1-inch Texas record hailstone near Vigo Park, Swisher County, on June 2, 2024.
- UL 2218 Class 4 uses a 2-inch steel ball at 23.71 ft-lbs; failure means cracking or tearing visible on the back (NRCA; IBHS).
- IBHS says shingles rated Good or Excellent in its hail ratings outperform typical Class 4 shingles against realistic hail up to 2 inches (IBHS FORTIFIED).
- Weathered shingles hit by two sub-severe hail events became up to ten times more susceptible to later large hail (IBHS).
- TDI says impact-resistant roof discounts are set company by company; TWIA requires UL-labeled products and Form PC068.
- TDI warns metal-roof discounts may come with a cosmetic damage exclusion.
- 2025 Cost vs. Value, Houston: asphalt shingle replacement $27,519 (68.9% recouped); metal $44,883 (49.1%).
What is the best roof for hail in Texas?
There is no single best roof for all of Texas, because the state has three different roofing problems: hail (worst across North and Central Texas and the Panhandle), hurricane wind (the Gulf Coast) and heat (everywhere). For hail, the evidence points to roof coverings with a tested impact rating, and the best of those are products that also do well in independent testing that uses real ice.
The hail risk is real and rising. The Insurance Information Institute, citing NOAA Storm Prediction Center data, reported Texas had 902 major hail events (hail 1 inch or larger) in 2025, far more than any other state. NOAA confirmed a Texas record hailstone of 7.1 inches near Vigo Park in Swisher County on June 2, 2024. And NOAA's billion-dollar disaster list includes a May 27 to 28, 2024 storm that dropped golf-ball to softball-sized hail across North and East Texas, including Dallas and Houston, at about $2.3 billion in damage.
Short answer by region
| Where you live | Main threat | What to prioritize |
|---|---|---|
| Dallas-Fort Worth, North Texas, Panhandle | Large, frequent hail | UL 2218 Class 4 roofing; among asphalt shingles, products rated Good or Excellent by IBHS; or Class 4 metal if you accept possible cosmetic dents |
| Austin, San Antonio, Hill Country | Hail plus heat; wildfire edge in some areas | Class 4 impact rating, Class A fire rating, lighter or reflective colors |
| Houston (inland Harris and surrounding) | Hail, derechos and hurricane wind | Impact rating plus the highest wind rating; sealed roof deck and ring-shank nails |
| Gulf Coast (TWIA counties) | Hurricane wind and windborne debris | Wind-rated roofing (ASTM D3161 110 mph or better per TDI), Class 4 where debris is likely, secondary water barrier, WPI-8 certification |
What is UL 2218 Class 4, and how does it compare with FM 4473?
UL 2218 is the main test U.S. insurers and TDI use to rate a roof covering's hail resistance. A lab drops steel balls on the roofing from set heights. The ball size and impact energy rise with each class, according to NRCA's Professional Roofing and IBHS:
| UL 2218 class | Steel ball diameter | Impact energy |
|---|---|---|
| Class 1 | 1.25 inches | 3.53 ft-lbs |
| Class 2 | 1.50 inches | 7.35 ft-lbs |
| Class 3 | 1.75 inches | 13.56 ft-lbs |
| Class 4 | 2.00 inches | 23.71 ft-lbs |
A product passes if there is no cracking or tearing visible from the back. Surface marks like granule loss are not failures in the test, which is exactly why a "passed" Class 4 shingle can still look beat up after a storm.
FM 4473 is a different impact test used for some products. Owens Corning notes impact-resistant shingles are usually evaluated under UL 2218 and/or FM 4473, and IBHS's FORTIFIED program asks for FM 4473 Class 4 for tile seeking its hail supplement. Both tests classify products from Class 1 to Class 4.
Labels matter for your discount
For TWIA's impact-resistant credit, TDI says each piece must carry the UL (or other TDI-approved lab) label with the impact class, the manufacturer's name, the year made and the brand. Unlabeled products don't qualify, even if they meet the standard. Keep a wrapper or label photo from your job.
Do impact-resistant shingles really stop hail damage?
They help, but they are not hail-proof, and independent research shows big differences between products. Here is what the Insurance Institute for Business and Home Safety (IBHS), an insurer-funded research lab, has found:
- Repeated hits expose weakness. In IBHS's 2013 to 2014 tests that struck the same spot twice at Class 4 energy, impact-rated 3-tab shingles passed at about 60% of locations and impact-rated architectural shingles at about 40%, compared with about 25% and 30% for basic shingles. IBHS reported no product passed more than Class 2 impacts without at least one failing double-impact location. Double strikes are tougher than the standard UL protocol, so treat these as a stress test, not a field prediction.
- Real ice testing separates products. IBHS's FORTIFIED program says shingles rated Good or Excellent in the IBHS Hail Impact-Resistant Shingle Ratings outperform typical Class 4 shingles against realistic hailstones up to 2 inches.
- Aging reduces performance. IBHS's short-term roof aging research found that natural weathering over one to two years can measurably reduce hail impact performance, and repeated hail exposure can speed the decline.
- Small hail adds up. IBHS found that roofs exposed to natural weathering and two simulated sub-severe hail events (stones under 1 inch) became up to ten times more susceptible to damage from later large hail than new shingles. IBHS also says current testing standards do not assess performance durability over time.
What this means for a Texas buyer
- Treat "Class 4" as the minimum ticket, not the finish line.
- If you choose asphalt shingles, ask whether the product is rated Good or Excellent in IBHS's shingle ratings.
- Expect an impact-rated roof to reduce, not eliminate, claims. Even good roofs age.
- Photograph the roof each spring so you can show an adjuster what changed after a storm.
Are Class 4 impact-resistant shingles worth it in Texas?
In most hail-prone parts of Texas, the case is strong, but do the math for your house. Three things decide it:
1. The price difference
Get two quotes on the same roof: one with a standard architectural shingle and one with a Class 4 product, with identical underlayment, flashing and ventilation. Owens Corning acknowledges Class 4 shingles are a premium product that may cost more. The difference you see in quotes is the real number to work with.
2. The insurance credit, in dollars
TDI says impact-resistant discounts are set company by company. Texas had mandatory credits for UL 2218 roofs starting in 1998, but TDI's current guidance is that each insurer decides the amount and what proof it accepts, and TDI's September 2026 bulletin only encouraged insurers to offer meaningful mitigation discounts. Claims of a fixed 20% to 35% discount come from marketing, not TDI. Ask your agent for the annual dollar credit before you buy.
3. The claims you avoid
With a percentage wind and hail deductible (a 2% deductible on a $350,000 dwelling limit is $7,000), every avoided roof claim saves a large out-of-pocket cost, plus a claim on your record. TDI notes companies may consider your claims history when setting premiums.
Simple payback test: extra cost divided by the annual insurance credit gives years to break even from the discount alone. If that's longer than you'll own the house, the decision turns on avoided deductibles and hassle. For many DFW homeowners who have replaced a roof after hail before, that alone settles it.
How much is the insurance discount for Class 4 shingles?
It varies by insurer and is not set by law. To get whatever your company offers, have the roofer complete TDI Form PC068 (required by TWIA; private insurers may use it or their own form), send it to your agent, and check that the credit appears on your declarations page. Also ask whether the credit comes with a cosmetic damage exclusion. See ACV, RCV and cosmetic exclusions.
Do metal roofs dent from hail?
Yes, they can. TDI's 2026 consumer article on metal roofs says they "can still dent or scratch from hail, debris from high winds, and falling tree branches," and that while this might not affect performance, it can hurt curb appeal. Durability depends on the metal type, panel thickness, coating and installation.
The bigger issue is insurance. TDI warns that a metal-roof discount "might come with conditions like an exclusion for cosmetic damage," meaning dents that don't cause leaks won't be paid. Texas created this kind of exclusion (Endorsement HO-145) in 1998 for roofs receiving impact-resistant credits. TDI also notes many policies reduce coverage as a roof ages, though usually more slowly for metal than for shingles.
Metal roof pros and cons in Texas
| Pros | Cons |
|---|---|
| Long life: NRCA-attributed figures list sheet metal at 20 to 50+ years | Highest upfront cost; 2025 Cost vs. Value priced a metal re-roof at $44,883 in Houston and $46,790 in Dallas |
| Fire resistant and energy efficient (TDI) | Can dent; cosmetic exclusions are common with metal discounts |
| Class 4 panels are available; FORTIFIED's hail supplement requires UL 2218 Class 4 for metal | Lower resale recoup than shingles in 2025 data (about 49% in Houston and Dallas) |
| Could lower premiums with some insurers (TDI) | HOA rules may limit metal panels; Texas's HOA roofing law protects certain shingles, not panels |
Is stone-coated steel good for Texas?
Stone-coated steel is a metal roof with a granular surface that looks like shingles, shakes or tile. It shares metal's strengths (long life, fire resistance) and its insurance questions. Before buying, ask for the product's UL 2218 class and label, its wind rating, and whether your insurer treats it as metal for cosmetic exclusion purposes. The granule surface can hide small dents better than smooth panels, but get your insurer's answer in writing rather than relying on looks.
Are architectural shingles better than 3-tab?
For most Texas homes, architectural (also called dimensional or laminated) shingles are the standard choice today, but the label alone doesn't settle hail or wind performance.
- Minimum standard: ASTM D3462 is the U.S. product standard for glass-felt asphalt shingles, referenced by the building codes, with minimum Class A fire and Class A (60 mph) wind resistance, according to NRCA's Mark Graham.
- Wind ratings: self-sealing shingles are classified under ASTM D7158 as Class D, G or H, for basic wind speeds of 115, 150 or 190 mph. ASTM D3161 classifies Class A, D or F for 60, 90 or 110 mph. Owens Corning says shingles on the market generally carry D3161 Class F and D7158 Class H, while warranted wind speeds differ by product.
- Hail: in IBHS's double-impact tests, basic architectural shingles did slightly better than basic 3-tab (about 30% vs. 25% pass), but among Class 4 products, 3-tab passed more often (about 60% vs. 40%). Impact rating mattered more than shape.
- Life: NRCA-attributed tables list asphalt shingles at 15 to 30 years. Heavier architectural products often carry longer warranties, but heat, hail and installation decide real life.
Bottom line: choose an impact-rated product with the highest wind classification, installed to the manufacturer's instructions. Shape is mostly about looks and warranty terms.
What roof is best for Texas heat?
Heat ages roofs and drives cooling bills. Three choices make the biggest difference:
1. Reflectivity (color and coating)
Research summarized by Lawrence Berkeley National Laboratory scientists (in a 1998 ASHRAE paper indexed by the U.S. Department of Energy's OSTI) found highly absorptive roofs can run as much as 50 C (90 F) hotter than the air, versus about 10 C for highly reflective roofs. In experiments on buildings in California and Florida, painting roofs white cut air-conditioning load by 10% to 50%, depending on insulation. Savings depend heavily on the building, so treat these as research results, not a promise for your house.
Texas law helps here: Property Code 202.011 bars HOAs from banning shingles designed to provide heating and cooling efficiency greater than customary shingles, if they resemble approved shingles and meet the law's other conditions. See Texas HOA roofing rules and cool roofs.
2. Attic ventilation
Balanced intake (soffit) and exhaust (ridge or roof) ventilation helps keep attic heat and moisture in check. Follow the shingle manufacturer's ventilation requirements and your local code. On the coast, pick vents that resist wind-driven rain: IBHS's FORTIFIED standard requires wind- and rain-resistant attic vents because typical vents can pull loose or let rain blow in.
3. Sealant and aging
IBHS's September 2026 report on 10-year aged shingles found that unsealing (shingles losing the sealant bond that holds them flat) was the single biggest driver of wind failures, and that climate factors like solar radiation and temperature cycles affected how shingles aged. All tested products had the top wind class when new, yet performed very differently after aging. Ask manufacturers and roofers about long-term sealant performance in hot climates, and inspect for lifted tabs after storms.
What is the best roof for Texas Gulf Coast wind?
On the coast, the roof system matters more than the covering. TDI's windstorm guidance and IBHS's FORTIFIED Roof standard point to the same upgrades:
| Upgrade | Why it matters | Source |
|---|---|---|
| Shingles tested to ASTM D3161 at 110 mph or higher (or D7158 Class H) | Highest wind classifications | TDI windstorm FAQ; FORTIFIED |
| Sealed roof deck (tape over deck joints) with secondary water barrier | If the covering blows off, the deck still sheds water. IBHS says each inch of rain on an exposed deck can let in the equivalent of 9 bathtubs, and sealing seams can cut water intrusion by up to 95% | TDI; IBHS FORTIFIED |
| Ring-shank deck nails in a tighter pattern | IBHS testing found 8D ring-shank nails with closer spacing can double deck uplift resistance | IBHS FORTIFIED |
| Wider drip edge and fully adhered starter strip | Wind failures often start at the roof edge | IBHS FORTIFIED |
| Roof-to-wall hurricane clips and braced gable ends | Keeps the roof structure attached; TDI calls gable-end collapse a common hurricane failure | TDI windstorm FAQ |
| UL 2218 Class 4 covering where windborne debris is likely | Impact resistance against flying debris as well as hail | TDI windstorm FAQ |
In TWIA counties, the re-roof also needs a TDI windstorm certificate. See our WPI-8 guide. TDI's September 2026 bulletin specifically encouraged insurers to offer discounts for FORTIFIED Home roofs, so ask your agent about a FORTIFIED designation.
What about tile?
Tile roofs have long expected lives (about 50 years in NRCA-attributed tables) and are common in some Texas neighborhoods, but they are heavy and need structural capacity. For hail, FORTIFIED's supplement requires FM 4473 Class 4 tile. Ask about broken-tile replacement and matching, since individual tiles can crack under foot traffic and hail.
How do the main Texas roof types compare?
| Material | Typical life (NRCA-attributed) | Hail | Wind | Heat | 2025 Houston cost benchmark |
|---|---|---|---|---|---|
| Standard architectural asphalt shingle | 15 to 30 years | Vulnerable; ages faster with small hail (IBHS) | Good when sealed; check D7158 Class H | Dark colors run hot | $27,519 full replacement (Cost vs. Value) |
| Class 4 asphalt shingle | 15 to 30 years | Better; performance varies by product (IBHS ratings) | Same wind classes available | Reflective options exist | Get side-by-side quotes |
| Metal panels / stone-coated steel | 20 to 50+ years | Resists leaks; may dent; Class 4 available | Strong when attached to tested design pressures | Reflective finishes available | $44,883 (Cost vs. Value) |
| Concrete or clay tile | About 50 years | Can crack; FM 4473 Class 4 options | Needs tested attachment | Light colors and air space help | Not in 2025 Cost vs. Value |
The Cost vs. Value figures are for a large benchmark full tear-off job in 2025, not a quote for your house; Zonda notes they are built from cost indices and local building-cost data. Resale recoup in 2025 for Houston was 68.9% for asphalt and 49.1% for metal; for San Antonio, 77.8% and 65%. See our roof replacement cost guide for full regional numbers.
One code note: the City of Houston's 2021 residential code amendments bar wood shingles and shakes in new construction, and allow existing wood roofs to be replaced with wood only if it is fire-retardant treated.
What is the best roof in Dallas, Houston, San Antonio and Austin?
The regional table above gives the short version. Here is what changes city by city, including local permit rules that affect your choice.
Dallas-Fort Worth
DFW sits in the heart of Texas hail country, and the May 27 to 28, 2024 storm that NOAA lists at about $2.3 billion hit Dallas directly. Hail resistance should come first: a UL 2218 Class 4 product, and among shingles, one rated Good or Excellent by IBHS. DFW is also hotter on paper than it used to be: the 2021 International Energy Conservation Code map moved Dallas-Fort Worth from climate zone 3 to zone 2, according to Johns Manville's summary, so lighter or reflective colors make more sense than they once did. Dallas requires a Residential Roofing Permit when roofing work (materials plus labor) exceeds $500, pulled by a registered roofing contractor or by a homeowner doing their own work on a homestead. The permit covers coverings and decking only; rafter or joist repairs need an alteration permit.
Houston
Houston gets hail, derechos (long-lived windstorms) and hurricanes. Hurricane Beryl came ashore as a Category 1 on July 8, 2024, causing widespread wind damage, multi-day power outages for millions and more than 50 tornadoes, per NOAA. Prioritize wind: shingles with the highest wind class, a sealed deck, ring-shank nails and strong edge details, then impact resistance. Houston's 2021 residential code amendments bar wood shingles and shakes in new construction. The city's Residential Roofing Permit (HPWCODE1140) covers re-roofs and overlays, needs the Residential Re-Roof Only Worksheet (CE-1109) and an iPermits account, and the permit and worksheet must be on site for inspection. Parts of Harris County east of Highway 146 are in TDI's designated catastrophe area, where windstorm inspection rules apply.
San Antonio
San Antonio combines hail and heat. The previous Texas hailstone record, about 6.5 inches, fell in Hondo, west of San Antonio, in 2021, according to NOAA. A Class 4 product in a lighter color covers both threats, and CPS Energy's cool roof rebate (see our cool roof guide) can trim the cost of a reflective roof. San Antonio's Development Services Department requires a permit any time a roof is replaced or installed, and its home remodeling guide requires an engineer's inspection report when the roof pitch or materials change. Switching from shingles to heavier tile, for example, means planning for that report.
Austin and the Hill Country
Austin sees hail, long hot summers and, on its western edge, wildfire risk. Austin exempts several roof jobs from building permits, including asphalt shingles replacing existing asphalt shingles and roof decking up to 128 square feet, but the exemption does not apply in the city's Wildland-Urban Interface area. A Class 4, Class A fire-rated roof with ember-resistant vents fits most Austin-area homes. In the Hill Country, clay tile and standing-seam metal are traditional looks; both need the right structure and attachment.
Panhandle and West Texas
The Panhandle produced the Texas record hailstone, 7.1 inches near Vigo Park in Swisher County on June 2, 2024. It also has real winters and strong winds. Impact resistance comes first. Very large hail can damage any roof, so in this region the decision is less about avoiding all damage and more about limiting how often you file a claim. A reflective roof saves less here than on the coast, because heating is a bigger share of the bill.
Corpus Christi, Galveston and the coast
In the 14 TWIA coastal counties, wind and windborne debris drive the choice, and most roof replacements need a TDI windstorm inspection and certificate of compliance. Roof repairs under 100 square feet that do not involve decking are among the listed exceptions. Salt air also corrodes metal and fasteners, so ask for coastal-rated finishes and stainless or hot-dipped fasteners where the manufacturer requires them. See the Texas roofing hub and the city pages for Houston, Dallas, San Antonio and Austin.
Is clay or concrete tile a good roof in Texas?
Tile can last decades and suits Spanish, Mediterranean and Hill Country styles, but it is a different kind of roof, and Texas hail is hard on it.
- Slope limits. The 2021 International Residential Code, as adopted in many Texas cities, requires clay and concrete tile to be installed on slopes of at least 2.5 units vertical in 12 horizontal (2.5:12), with double underlayment on lower slopes. A low-pitched ranch house may not qualify.
- Weight. Tile is far heavier than shingles. Switching from shingles to tile can require a structural check. In San Antonio, a change in roof materials triggers an engineer's inspection report.
- Hail. Tile can crack under large hail and foot traffic. For FORTIFIED's hail supplement, IBHS requires FM 4473 Class 4 tile. Ask for the product's impact class in writing.
- The real roof is underneath. On a tile roof, the underlayment does most of the waterproofing. It often wears out before the tile does, and replacing it means lifting the tile.
- No overlays. The IRC does not allow a roof recover (a new layer over the old) where the existing covering is clay, slate or cement tile. Tile always comes off for re-roofing.
- Matching. Ask how many spare tiles the roofer will leave you. Discontinued colors can make storm repairs hard to match.
Tile makes the most sense where the home was built for it, the HOA expects it, hail risk is lower, and you plan to stay a long time. In DFW and the Panhandle, many owners choose Class 4 metal or shingles instead.
Can you put a new roof over the old one in Texas?
Sometimes, but for most Texas homes it is a poor trade. The model code many Texas cities use (2021 IRC Section R908.3.1.1) does not allow a roof recover:
- where the existing roof or covering is water-soaked or has deteriorated so it is not an adequate base for more roofing;
- where the existing covering is slate, clay, cement or asbestos-cement tile; or
- where the existing roof already has two or more layers of any covering.
A full replacement, the code says, removes existing layers down to the roof deck. Even where an overlay is legal, consider the downsides in hail country:
- Hidden deck damage. Tearing off lets the roofer see and replace soft or rotted decking. An overlay covers it up.
- Impact performance. A Class 4 rating is earned in a lab on a specified assembly. Ask the manufacturer in writing whether its rating and warranty apply when the product goes over old shingles.
- Wind details. Sealed deck tape, new drip edge and ring-shank deck nailing, the upgrades IBHS and TDI recommend on the coast, can't be done properly without a tear-off.
- Weight and heat. A second layer adds load and can hold more heat.
Houston's residential roofing permit covers overlays, and Dallas and San Antonio permit rules apply either way. If a bid is much cheaper because it skips tear-off, ask why in writing.
What fire rating does a Texas roof need?
The building code classifies roofs as Class A, B or C for fire resistance, and requires a given class where local law designates it (IRC R902.1). Class A is the highest rating. Most modern asphalt shingles, metal, and clay or concrete tile can reach Class A, sometimes as part of a tested assembly with specific underlayment. Untreated wood shakes generally do not, which is part of why Houston allows wood replacements only if fire-retardant treated.
Fire risk is not just a West Texas problem. Austin's permit exemptions for simple re-roofs do not apply in its Wildland-Urban Interface area, and drought can bring grass fires close to homes across Central and North Texas. The Texas A&M Forest Service says wind-blown embers are the main cause of building ignition and can pass through 1/4-inch mesh. It recommends:
- 1/8-inch mesh on attic vents in wildfire-prone areas;
- a ridge vent rated to resist wind-driven rain for outlet ventilation;
- 1/8-inch mesh attached under the roof sheathing at turbine vent openings.
Keep gutters and roof valleys clear of leaves and pine needles, which can catch embers. If you live near open land, ask your roofer for a Class A assembly and ember-resistant vents in the same job.
How your roof material affects a Texas insurance claim
The roof you choose shapes what your policy will pay after a storm, not just your premium.
Replacement cost vs actual cash value
TDI explains that replacement cost (RCV) coverage pays to repair or replace a roof at current prices, while actual cash value (ACV) pays less for an older or worn roof. As roofs age, some insurers switch roof coverage to ACV at renewal. TDI's example: on a 10-year-old roof costing $10,000 to replace with a $2,000 deductible, a replacement cost policy pays $8,000. An ACV policy might value the roof at $7,000 and pay $5,000, leaving you $5,000 out of pocket instead of $2,000. TDI notes many policies reduce coverage more slowly for metal roofs than for shingles. A longer-lasting roof can keep you on better terms longer, but check how your insurer handles roof age.
Wind and hail deductibles
TDI advises asking whether your wind and hail deductible differs from your all-other-perils deductible. A percentage deductible can mean thousands out of pocket per roof claim. The Texas FAIR Plan dropped its 1% wind and hail deductible option on homeowners policies effective July 1, 2026; existing 1% policies change to 2% at renewal. This is a big reason a hail-resistant roof can pay off even when the premium discount is small.
Cosmetic damage exclusions
Discounts on metal and some impact-resistant roofs may come with a cosmetic damage exclusion: dents that don't let water in aren't paid. Before you buy, ask your agent to tell you in writing whether choosing a given material would add such an endorsement and what it means at claim time. See ACV, RCV and cosmetic exclusions in Texas.
Be wary of "free roof" pitches
TDI warns that it is illegal for contractors to offer to waive a deductible or promise a rebate of it, and insurers may ask for proof that you paid it. A roofer who pitches a pricier material "paid for by insurance" is selling you the claim, not the roof. Choose the material on its merits, then file only for damage that actually happened.
How to make sure you actually get the roof you paid for
Material decisions are only as good as what lands on your roof. Use this sequence during the job:
- Put the exact product in the contract: manufacturer, product line, color, UL 2218 class, wind class and, for shingles, the IBHS rating if that was part of your choice.
- Check deliveries. Photograph bundle wrappers or panel labels when material arrives. TWIA's credit requires the UL label with impact class, manufacturer, year made and brand.
- Ask about accessories. Starter strips, ridge caps and underlayment should be what the manufacturer specifies for the system, especially if you want an enhanced warranty.
- Watch for tear-off and deck work. Ask the roofer to photograph the bare deck, any replaced sheets, the deck tape or secondary water barrier, and the nailing.
- Get Form PC068 (Impact-Resistant Roofing Installation Form) from the contractor, plus any form your insurer prefers, and send it to your agent.
- Confirm the permit was closed with a final inspection, and in TWIA counties that the windstorm certificate was issued.
- Register the warranty with the manufacturer if required, and keep the workmanship warranty from the contractor.
- Check your declarations page at renewal for the impact-resistant credit and any new endorsements.
Texas has no state roofing license, so vetting the contractor is on you. See how to vet a Texas roofer and the roofing contract checklist.
How to choose a provider
- Identify your main threat: hail, coastal wind, heat or a mix.
- Ask for the UL 2218 class and, for shingles, the IBHS hail rating of each product quoted.
- Ask for the ASTM D7158 or D3161 wind classification.
- Get side-by-side quotes for standard and Class 4 products with identical accessories.
- Ask your agent for the annual dollar credit and whether a cosmetic exclusion applies.
- On the coast or in Houston, ask for a sealed deck, ring-shank nails and FORTIFIED-style edge details.
- Check HOA rules and Property Code 202.011 protections before choosing color or material.
- Keep product labels or wrapper photos and get Form PC068 from the installer.
- In TWIA counties, make sure the WPI-8 inspection is scheduled before the deck is covered.
- Photograph the new roof for your records and re-check it every spring.
- Ask whether the job is a full tear-off; avoid overlays in hail country.
- Near open land, ask for a Class A assembly and 1/8-inch mesh on vents.
Related roofing guides
- Hail Damage on Your Roof: How to Spot It, Prove It, and Claim It in Texas
- Asphalt Shingle Roofs: Which Type, How Long They Last, and What Warranties Pay
- Metal Roofs: Standing Seam vs Exposed Fastener, Gauges, Coastal Metals, Costs and Myths
- ACV vs RCV Roof Coverage in Texas: How Do Depreciation, Roof Schedules and Cosmetic Exclusions Work?
- Can Your Texas HOA Block an Impact-Resistant, Solar or Metal Roof? Texas Roofing Codes and HOA Rules
- What's Under Your Shingles: Decking, Underlayment, Secondary Water Barrier and Ventilation Explained
- Cool Roofs and Energy Bills in the South: Do Reflective Roofs Pay Off?
- How Much Does a New Roof Cost in Texas and Florida? (What Actually Drives the Price)
Roofing by state and city
Questions people ask
What is the best roof for hail in Texas?
A roof covering rated UL 2218 Class 4 is the starting point. Among asphalt shingles, IBHS says products rated Good or Excellent in its hail ratings outperform typical Class 4 shingles against realistic 2-inch hail. Class 4 metal also resists hail leaks but can dent. On the coast, add the highest wind ratings and a sealed roof deck.
Are Class 4 impact-resistant shingles worth it in Texas?
Usually, in hail-prone areas like Dallas-Fort Worth. Compare the extra cost with your insurer's annual dollar credit and the deductibles you're likely to avoid. TDI says insurers set their own impact-resistant discounts, so get the exact credit before buying, and ask whether a cosmetic damage exclusion comes with it.
How much is the insurance discount for Class 4 shingles?
It depends on your insurer. TDI says each company sets its own impact-resistant roofing credit and decides what proof it accepts. Advertised discounts of 20% to 35% are not TDI figures. Ask your agent for the dollar amount, have your roofer complete TDI Form PC068, and confirm the credit on your declarations page.
Do metal roofs dent from hail?
Yes. TDI says metal roofs can dent or scratch from hail, wind-blown debris and branches, even if the roof still works. Many insurers that discount metal roofs add a cosmetic damage exclusion, so dents that don't leak may not be covered. Ask your agent before choosing metal, and look for UL 2218 Class 4 panels.
What is UL 2218 Class 4?
UL 2218 is the standard hail test for roof coverings. Labs drop steel balls on the product; Class 4 uses a 2-inch ball at 23.71 ft-lbs of energy, the highest class. A product passes if no crack or tear shows on the back, so surface marks can still occur. TWIA's credit requires the UL class label on the product.
Do impact-resistant shingles really stop hail damage?
They reduce damage but don't stop it. IBHS research found real differences between Class 4 products, that weathering over just one to two years can reduce hail performance, and that repeated small hail can make shingles up to ten times more vulnerable to later large hail. Choose well-rated products and inspect after storms.
What roof is best for Texas heat?
Reflective, lighter-colored roofing with good attic ventilation. Lawrence Berkeley Lab research found absorptive roofs can run up to 90 F hotter than the air, and white roofs cut air-conditioning loads 10% to 50% in some California and Florida buildings. Texas HOAs can't ban qualifying energy-efficient shingles under Property Code 202.011.
What is the best roof for the Texas Gulf Coast?
A wind-focused system: shingles tested to ASTM D3161 at 110 mph or more (or D7158 Class H), a sealed roof deck with a secondary water barrier, ring-shank deck nails, a strong roof edge and hurricane clips, per TDI and IBHS FORTIFIED. In TWIA counties, get the TDI windstorm certificate for the re-roof.
What roof lasts the longest in Texas?
In NRCA-attributed life tables, clay and concrete tile run about 50 years, metal 20 to 50-plus years and asphalt shingles 15 to 30 years. In Texas, though, hail and storms often end a roof's life before age does. A longer-lived material only pays off if it also resists the hail, wind and heat where you live, and if your structure, HOA and budget can handle it.
Is tile a good roof for Texas hail?
Tile can crack under large hail and foot traffic, and replacing broken pieces with matching tiles can be hard. If you want tile, ask for an FM 4473 Class 4 product, which IBHS requires for its FORTIFIED hail supplement, and ask the roofer to leave spare tiles. In the worst hail areas, such as DFW and the Panhandle, many owners choose Class 4 metal or shingles instead.
Can I put new shingles over my old roof in Texas?
Only in limited cases. The 2021 IRC used by many Texas cities bars a recover over a water-soaked or deteriorated roof, over clay, slate or cement tile, or over a roof that already has two or more layers. Even when allowed, an overlay hides deck damage and prevents sealed-deck and nailing upgrades. Ask the manufacturer whether the impact rating and warranty still apply.
Do I need a permit to replace my roof in Texas?
It depends on the city. Dallas requires a residential roofing permit for work over $500. Houston requires a residential roofing permit with a re-roof worksheet. San Antonio requires a permit any time a roof is replaced. Austin exempts some like-for-like re-roofs, but not in its Wildland-Urban Interface area. In the 14 TWIA counties, most replacements also need a windstorm inspection.
What fire rating should my Texas roof have?
Class A, the highest rating, is a sensible choice anywhere near open land or in drought-prone areas. Most modern asphalt shingles, metal and tile can reach Class A, sometimes as part of a tested assembly. The Texas A&M Forest Service says embers are the main cause of building ignition and recommends 1/8-inch mesh on attic vents in wildfire-prone areas.
Sources
- Professional Roofing (NRCA): Understanding asphalt shingle standards
- IBHS: Relative Impact Resistance of Asphalt Shingles
- IBHS FORTIFIED: FORTIFIED Roof
- IBHS: Short-Term Roof Aging Farm
- IBHS: Impact Testing of High Concentrations of Small Hail
- IBHS: Asphalt shingle wind performance after 10 years of aging (Sept. 22, 2026)
- Owens Corning: Class 4 Impact-Resistant Roofing Shingles
- Owens Corning: Understanding asphalt shingle wind resistance
- TDI: Products qualifying for impact-resistant roofing credits
- TDI Form PC068
- TDI: Metal roofs and home insurance: 4 key facts
- TDI Bulletin B-0030-8 (1998): HO-145 and metal roof credits
- TDI Commissioner's Bulletin B-0008-26 (2026)
- TDI: Windstorm FAQ for builders and owners
- Insurance Information Institute: Facts + Statistics: Hail
- NOAA NCEI: New Texas Hailstone Record Confirmed
- NOAA NCEI: Billion-Dollar Disasters, Texas
- OSTI (DOE): Cool roofs save energy (ASHRAE 1998)
- USDA Forest Service: Typical life expectancy of building components (NRCA)
- Zonda/JLC Cost vs. Value 2025: Houston
- Zonda/JLC Cost vs. Value 2025: Dallas
- Zonda/JLC Cost vs. Value 2025: San Antonio
- Zonda/JLC Cost vs. Value 2025: Methodology
- Tex. Prop. Code ch. 202
- Houston Amendments to the 2021 IRC (effective Jan. 1, 2024)
- 2021 IRC Chapter 9 roof assemblies, Texas (UpCodes): R902, R905.3, R908
- Texas A&M Forest Service: Firewise attic and crawl space vents
- TDI: Replacing your roof
- TDI: Homeowners insurance claims guide (ACV example)
- TDI: Storm recovery tips
- TDI: Do you need a windstorm inspection?
- Texas FAIR Plan: deductible changes effective July 1, 2026
- Dallas Development Services: residential permits guide
- Houston Permitting Center: residential roofing permit HPWCODE1140
- San Antonio DSD: home remodeling guide
- Austin: work exempt from building permits
- Johns Manville: Understanding the IECC's new climate zone map
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


