New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · AC and heating

New Homeowner's Guide: How Does My AC and Heating System Work, and What Do I Do First?

A first-90-days walkthrough for new Texas and Florida homeowners: identify your system, find the filter and condensate drain, learn the shutoffs, track down the warranty and set up maintenance.

In your first week, find every part of your HVAC system: the thermostat, the indoor unit (in a closet, garage or attic), the outdoor unit, the return grilles, the filter slot, the condensate drain line and the breakers and outdoor disconnect. Change the filter, photograph both data plates, and look up the warranty by serial number. Then book a professional check-up if there are no records, and check the filter monthly.

Key facts

  • 96% of Florida homes and 95% of Texas homes used air conditioning in 2020; 90% and 83% used central AC (EIA RECS).
  • ENERGY STAR advises checking the filter monthly and changing it at least every 3 months.
  • ENERGY STAR recommends a contractor check cooling each spring and heating each fall.
  • Florida requires an auxiliary drain pan or other listed secondary protection for cooling coils where overflow could damage the building (FBC-M 307.2.3).
  • EPA recommends keeping indoor humidity below 60%, ideally 30%-50%.
  • CPSC recommends CO alarms on every level of the home and outside sleeping areas.
  • ENERGY STAR says certified smart thermostats can save about $100 a year in high-bill or often-empty homes.
  • Goodman's warranty page lists Texas (units installed from Sept. 1, 2021) and Florida (from July 1, 2023) as states where its limited warranty must transfer to a new owner when the home is sold.

What should I do first with the AC in a new house?

Spend one hour in your first week learning the system, before you need it in an emergency. In Texas and Florida, air conditioning is not optional: EIA's 2020 survey found 96% of Florida homes and 95% of Texas homes use AC, and 90% of Florida homes and 83% of Texas homes use central AC. Here is the order we suggest:

  1. Find every piece of the system: thermostat, indoor unit (air handler or furnace), outdoor unit, return grilles, filter location, condensate drain and the electrical shutoffs.
  2. Change the filter on day one. You do not know when the last owner did.
  3. Photograph the data plates on the indoor and outdoor units (model, serial number, refrigerant, manufacture date).
  4. Check the condensate drain and safety switch.
  5. Test the thermostat in cooling and heating.
  6. Look up the warranty with the serial numbers.
  7. Book a professional check-up if you have no maintenance records.
  8. Test or install carbon monoxide alarms if the home has any gas appliance.

Each step is explained below, and a full first-90-days checklist is at the end.

How do I know what kind of HVAC system I have?

Walk the house and match what you find to this table.

What you seeSystem typeQuick tip
Outdoor unit plus an indoor cabinet with a gas pipe and a metal flue pipeSplit AC with gas furnaceYou need CO alarms and a yearly furnace safety check
Outdoor unit plus an indoor air handler (no flue, no gas line); the thermostat has "Emergency Heat" or "Aux Heat"Split heat pumpThe outdoor unit both cools and heats; backup electric strips help in cold snaps
Outdoor unit plus air handler; the outdoor plate says air conditioner, and heat comes from electric stripsSplit AC with electric heatHeating costs can be high; ask about a heat pump at replacement
One large box outside (on a slab or the roof) with ducts running into the house; only grilles insidePackage unitThe filter may be at a return grille inside or in the unit itself
Wall-mounted indoor heads with no ducts, connected to a small outdoor unitDuctless mini-splitEach head has washable filters you clean yourself
A unit through the wall under a windowPTAC or through-wall unitCommon in condos and hotels; check the condo rules on who maintains it

The outdoor unit's data plate usually says whether it is an air conditioner or a heat pump, and its model number often starts with letters that the manufacturer's literature explains. If the thermostat has an "Emergency Heat" or "Aux Heat" setting, you almost certainly have a heat pump. See split vs package systems, mini-splits and heat pumps vs furnaces.

Where the indoor unit hides in Texas and Florida homes

  • Interior closet (hallway or utility closet), often with the return grille in or beside the door.
  • Garage, usually on a platform or wall stand.
  • Attic, reached by a pull-down ladder. FSEC research in Florida found homes with attic air handlers used 30% more cooling energy, so attic units deserve extra attention to duct sealing and insulation.
  • Two systems: larger and two-story homes often have one system per floor, each with its own thermostat, filter and drain.

Where is my AC filter?

There are two common locations. Check both, because some homes have filters in more than one place.

  1. Behind a return air grille. Look for one or more large grilles, often in a hallway ceiling or wall, that pull air in (hold a tissue near it; it gets sucked toward the grille when the system runs). If the grille is hinged with latches or screws, the filter sits behind it. Many Florida closet systems have the return grille in the closet door or the wall beside it.
  2. At the indoor unit. A slot in the air handler or furnace cabinet, or in the duct right next to it, often with a removable cover. Attic units in Texas frequently have the filter at the air handler, which means a ladder trip each time. If that is your setup, ask a contractor whether a filter grille can be added at a ceiling return for easier access.

Changing it

  • Turn the system off at the thermostat.
  • Read the size printed on the old filter's edge (for example, 20x25x1). Buy the same size.
  • Note the airflow arrow on the frame. It points toward the indoor unit, in the direction air moves.
  • Write the date on the new filter's edge.

ENERGY STAR advises checking the filter every month, especially in heavy-use months, changing it if it looks dirty, and changing it at least every 3 months. A dirty filter slows airflow, makes the system work harder and can lead to early failure. Use the filter rating your system is designed for; very dense filters can restrict airflow in some systems. See air filters and MERV ratings.

Where is the condensate drain line?

Your AC pulls a lot of water out of the air, especially in Florida and coastal Texas. That water drips off the indoor coil into a drain pan and flows out through a drain line, usually white PVC pipe. To find it:

  • Follow the PVC pipe leaving the indoor unit. It often runs outside and ends near the outdoor unit or the foundation, or ties into a plumbing drain, sink trap or laundry standpipe.
  • Look for a T-fitting with a cap near the indoor unit. That is the cleanout access.
  • Look for a small float switch on the drain line or pan. It shuts the AC off if water backs up, which prevents a flood.
  • For attic or upstairs units, look for a secondary (overflow) pan under the unit, sometimes with its own drain that ends over a window or eave, where you would notice it dripping.

Florida's mechanical code requires an auxiliary drain pan or another listed secondary protection method for each cooling coil where condensate overflow could damage the building (FBC-M 307.2.3), and Florida's energy code requires attic air handlers to have an alarm or shutoff for a failed condensate drain (FBC-Energy R403.3.6). If water is dripping from a secondary drain, your main drain is clogged: call for service.

EPA advises keeping AC drip pans clean and drain lines unobstructed to prevent mold, and ENERGY STAR notes a plugged drain can cause water damage and affect indoor humidity. Many homeowners pour a cup of water down the cleanout every few months to confirm it flows; follow your manufacturer's or contractor's advice on cleaning products. See AC leaking water.

Shutoffs: how to turn the system off in an emergency

Know these before something goes wrong:

ShutoffWhere it isWhen to use it
Thermostat "Off"On the wallFirst step for any problem
Circuit breakersMain electrical panel; usually labeled AC, condenser, air handler, furnace or heat strips (often two-pole breakers)Electrical smell, burning, buzzing, storm prep, water near equipment
Outdoor disconnectSmall box on the wall near the outdoor unit with a pull-out block or leverBefore rinsing or working near the outdoor unit; before a hurricane
Furnace service switchLooks like a light switch on or near the furnaceBefore changing a furnace filter or if the furnace acts unsafe
Gas shutoff valveOn the gas line next to the furnace; handle crosswise to the pipe means offIf you smell gas, leave first and call your gas utility from outside

What is the emergency shutoff for my furnace?

For electrical problems, use the furnace service switch or the breaker. For a gas smell, do not flip switches: get everyone out, then call the gas utility or 911 from outside. CDC lists gas- and oil-burning furnaces among household carbon monoxide sources and advises annual service of heating systems. CPSC recommends battery-operated or battery-backup CO alarms on every level of the home and outside sleeping areas, and lists headache, dizziness, weakness, nausea, vomiting, sleepiness and confusion as CO poisoning symptoms. If an alarm sounds, get outside to fresh air and call 911. See carbon monoxide and gas furnace safety.

Before a hurricane, Trane recommends turning off the AC at both the thermostat and the breaker. See hurricane prep and power outages and generators.

How do I find my AC's warranty from the previous owner?

  1. Get the model and serial numbers from both the indoor and outdoor data plates.
  2. Use the manufacturer's online warranty lookup or call its customer service. Most major brands offer a lookup by serial number. It will show the install or registration date and what coverage remains.
  3. Ask the seller, agent or builder for the installation invoice, registration confirmation and any installer labor warranty. Labor warranties come from the installing contractor, not the manufacturer, and their transfer rules vary.
  4. Check the permit history with your city or county, which can show the installation date and the contractor.
  5. Register or transfer the warranty if the manufacturer requires it, and keep the confirmation.

Texas and Florida warranty transfer rules

Goodman's warranty page states that Texas (for units installed from September 1, 2021) and Florida (from July 1, 2023) require its limited warranty coverage to be transferred when the property is conveyed to a new owner, and that in Florida (from July 1, 2024) coverage cannot be conditioned on registration. That is one manufacturer's statement of how it applies state law; check your own brand's warranty document and ask the manufacturer to confirm in writing how it handles new owners.

A home warranty (a service contract often included in a sale) is a different product from the manufacturer's equipment warranty. Read its exclusions for pre-existing conditions, refrigerant, code upgrades and caps. See warranty registration and home warranties for AC.

Should I get an HVAC inspection after buying a home?

Usually yes, unless the seller gave you recent maintenance records and the system is young. A general home inspection is a visual, limited check. In Florida, a paid home inspector's report must note systems and components the inspector considers significantly deficient or near the end of their service life (§468.8323, as quoted by InterNACHI), but the inspector does not take the system apart. A dedicated HVAC check-up by a licensed contractor goes further. ENERGY STAR's maintenance checklist describes what a typical check-up should include:

  • Thermostat settings and controls
  • Tightening electrical connections and measuring motor voltage and current
  • Lubricating moving parts
  • Inspecting the condensate drain
  • Checking the system's start, run and shutdown cycle
  • Cleaning evaporator and condenser coils
  • Checking refrigerant level
  • Cleaning and adjusting blower components (airflow problems can cut efficiency by up to 15%)
  • For gas furnaces: gas connections, gas pressure, burner combustion and the heat exchanger

Ask the contractor to also note the system's age, refrigerant type, whether indoor and outdoor units are a matched pair, the condition of attic ducts, and the drain safety switch. Verify any contractor's license first: Texas on TDLR's license search, Florida on DBPR's license lookup. If you are still under contract to buy, see buying or selling a home: AC inspection.

What maintenance does a new house AC need, and how often?

TaskHow oftenWho
Check filter; change if dirtyMonthly; change at least every 3 months (ENERGY STAR)You
Keep outdoor unit clear of plants, leaves and debrisMonthly in growing seasonYou
Check that the condensate drain flows and the secondary pan is dryEvery few months, and monthly in peak summerYou
Rinse the outdoor coilMonthly near salt water; a few times a year inlandYou (power off)
Cooling check-upEvery spring (ENERGY STAR)Licensed contractor
Heating check-up, including gas furnace safetyEvery fall (ENERGY STAR; CDC advises annual heating service)Licensed contractor
Test smoke and CO alarmsMonthly; replace batteries per the alarm makerYou

ENERGY STAR suggests timing check-ups around the spring and fall time changes, because contractors get busy once summer and winter arrive. In Florida, where heating is light, many owners do one full visit in spring and a shorter heating check in fall. See the maintenance checklist and whether a maintenance plan is worth it.

What thermostat settings should I use in a new house?

  • Cooling: choose the warmest setting you are comfortable with. Each degree warmer reduces how long the AC runs. Use ceiling fans to feel cooler, and turn them off in empty rooms; fans cool people, not rooms.
  • Humidity: EPA recommends keeping indoor relative humidity below 60%, ideally 30% to 50%. If your home feels clammy even when the temperature is fine, the system may be oversized or the fan may be set to "On" instead of "Auto." See humidity and mold.
  • Heat pumps: ENERGY STAR advises heat pump owners not to set back the thermostat when away, because recovering can trigger expensive backup heat, and to avoid the "Auto" heat/cool changeover mode.
  • Away settings: for AC-only cooling, a moderate setback while you are out can save energy. Do not turn the AC off completely in a Texas or Florida summer if pets, plants or humidity-sensitive items are inside.
  • Smart thermostats: ENERGY STAR says homes with high heating and cooling bills, or that are empty much of the day, can save about $100 a year with an ENERGY STAR certified smart thermostat.
  • Heat safety: for older adults, infants or anyone with heart disease, keeping the home cool is a health issue, not just comfort. CDC warns fans can increase body temperature when indoor temperatures are above 90°F. See heat safety.

When you replace the old owner's thermostat, check whether the existing wiring supports the new model, and confirm whether you have a heat pump before choosing settings. See thermostats.

Learn your system's age and what that means

The data plate on the outdoor unit usually shows the manufacture date or encodes it in the serial number. The refrigerant on the label is a clue: R-22 equipment was almost always made before 2010, and R-454B or R-32 equipment is likely 2024 or newer. ENERGY STAR suggests having a heat pump or AC more than 10 years old evaluated. InterNACHI's Florida chart lists central ACs at 5 to 12 years and coastal condensers at 5 to 7. If your new home's system is near the end of that range, start saving and gathering quotes now, before it fails in July. See how long AC units last.

Texas and Florida specifics for new owners

Florida

  • Hurricane season runs every summer and fall. Florida was hit by 100 hurricanes from 1900 to 2024, per NOAA. Know your shutoffs, check the outdoor unit's tie-downs, and plan for outages.
  • Humidity is the main comfort issue. Watch for musty smells, condensation on vents and mold. See Florida humidity and mold.
  • Salt air shortens outdoor unit life on the coast. See coastal corrosion.
  • Utility programs: Duke Energy Florida offers a free Home Energy Check that unlocks rebates; FPL, TECO and JEA have rebates. See Florida rebates.
  • Condos and HOAs may control where equipment goes and who maintains it. See HOA and condo rules.

Texas

  • Attic systems are common. Learn the safe path to your air handler, and keep the attic access clear.
  • Heat and long seasons: Texas averaged 17.2 days a year at 100°F or above over 1900-2024, per NOAA. Have the system checked before May.
  • Winter: North Texas homes with heat pumps rely on backup heat strips in hard freezes; gas furnace homes need CO alarms. See winter heating repair.
  • Utility programs: Austin Energy, CPS Energy, CenterPoint and Oncor programs offer HVAC incentives through participating contractors. See Texas rebates.
  • Renting it out? Houston's 2026 Right to A/C ordinance and Dallas rental standards set cooling requirements. See Texas landlord AC law.

How to choose a provider

  • Week 1: Find the thermostat, indoor unit, outdoor unit, return grilles, filter slot, condensate drain, breakers, outdoor disconnect and any gas shutoff.
  • Week 1: Replace the filter, write the date on it, and note the size for future purchases.
  • Week 1: Photograph both data plates (model, serial, refrigerant, manufacture date).
  • Week 1: Test or install CO alarms on every level and outside sleeping areas if you have gas appliances.
  • Week 2: Look up the manufacturer warranty by serial number and register or transfer it if required.
  • Week 2: Ask the seller or agent for install invoices, permits and maintenance records.
  • Weeks 2-4: Book a licensed contractor check-up if there are no recent records; verify the license on TDLR or DBPR first.
  • Weeks 2-4: Confirm the condensate drain flows, the float switch works and any secondary pan is dry.
  • Month 2: Set the thermostat schedule; note whether you have a heat pump and adjust settings accordingly.
  • Month 2: Clear plants and debris around the outdoor unit; near the coast, start a rinsing routine.
  • Month 3: Check your utility for a free home energy check or rebates on insulation, duct sealing or future equipment.
  • Month 3: Put spring and fall check-ups and monthly filter checks on your calendar.
  • Any time: Keep a folder (paper or digital) for all HVAC receipts, warranties and service reports.

Related ac and heating guides

AC and heating by state and city

Questions people ask

How often should a new homeowner service the AC?

ENERGY STAR recommends a professional check of the cooling system each spring and the heating system each fall, plus checking the filter monthly and changing it at least every 3 months. If you have no records from the previous owner, schedule the first check-up soon after you move in rather than waiting for the season.

Why is there water dripping from a pipe above my window?

That is likely a secondary or overflow drain from an attic or upstairs air handler. Builders often route it where you will notice it. Dripping means the main condensate drain is clogged and water is filling the backup pan. Turn the system off and call for service to avoid ceiling damage and mold.

My filter slot is in the attic. Is that normal?

It is common in Texas and some Florida homes with attic air handlers. It is inconvenient, and people tend to skip changes. Ask a licensed contractor whether a filter-grille can be installed at a ceiling return so you can change filters from inside the house. Never run the system without a filter.

How do I know if my home warranty covers the AC?

Read the home warranty contract itself, not the sales sheet. Look for coverage caps, exclusions for pre-existing conditions, refrigerant charges, code-required upgrades and permits, and how service calls are assigned. A home warranty is separate from the manufacturer's equipment warranty, which you can look up with the serial number.

Do I need a carbon monoxide alarm if I have an all-electric home?

CO comes from fuel-burning appliances, attached garages with running vehicles and generators. An all-electric home with no attached garage has lower risk, but many safety experts still recommend alarms, and some local codes require them in certain homes. CPSC recommends CO alarms on every level and outside sleeping areas wherever CO risk exists.

What should I ask the seller about the HVAC system?

Ask for the installation date and invoice, the installer's name, any permits, maintenance records, warranty registration, known problems or repairs, and whether the system was ever flooded. In Texas and Florida, also ask about drain clogs, humidity or mold issues, and any rooms that never cool well.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration