Local Guide · Hurricane shutters and impact windows
How to Start a Hurricane Shutter or Impact Window Business in Florida or Texas
The licensing, insurance, product approval, sales-law and seasonal realities of opening a shutter or impact window company in Florida or Texas, written from the statutes, not from a manufacturer's dealer pitch.
In Florida, a shutter or impact window company needs a licensed qualifying agent: a Division I contractor or a certified specialty such as window and door installation, glass and glazing or specialty structure, plus liability insurance and, with any employee, workers' comp. Texas has no state license, but coastal jobs need TDI windstorm inspections and WPI-8 certificates. In both states, sell only approved, tested products, use compliant in-home sales contracts, and plan for a June to November demand surge.
Key facts
- In Florida, even offering, bidding on or negotiating contracting services counts as contracting, so a company that sells installed shutters needs a license (Fla. Stat. 489.105).
- A business organization contracts in Florida through a qualifying agent who holds the certificate or registration and has final approval authority over its construction work and business matters (Fla. Stat. 489.119).
- Florida contractors must put their license number on every bid, contract and advertisement and on any vehicle that bears the company name (Fla. Stat. 489.119(5)).
- Florida certified specialty contractors need at least $100,000 public liability and $25,000 property damage insurance unless a rule says otherwise (rule 61G4-15.003).
- In Florida construction, workers' comp applies to any employer with one or more employees; up to three corporate officers owning at least 10 percent each may elect an exemption, valid for 2 years, for a $50 fee (Fla. Stat. 440.02, 440.05).
- Florida bars advertising or selling any product as hurricane or wind-borne debris protection unless it holds state product approval (Fla. Stat. 553.842(5)).
- A first-time Miami-Dade product approval (NOA) costs $4,000 plus a 7.5% surcharge and is valid five years (Miami-Dade County).
- Texas workers' comp is elective for most private employers (Tex. Lab. Code 406.002), but coastal work requires TDI windstorm inspection to earn a WPI-8.
Step 1: Decide what kind of shutter business you are
"Shutter business" covers several models with very different legal duties:
| Model | What you do | Florida license needed? | Texas |
|---|---|---|---|
| Full-service installer | Sell, measure, permit and install shutters or impact windows | Yes, through a qualifying agent | No state license; city permits and TDI windstorm on the coast |
| Sales-only company that subcontracts installation | Sell installed jobs, hire others to install | Yes. Offering or bidding contracting services is contracting | No state license; you are the original contractor for lien law purposes |
| Product retailer or distributor | Sell panels or hardware over the counter, no installation | Generally no contractor license for retail sales, but product approval rules apply | No license; product claims must be truthful |
| Fabricator or manufacturer | Make shutters or windows | Product approval (Florida or Miami-Dade NOA), labeling and quality assurance | TDI product evaluation or test reports |
| Storm deployment service | Put up and take down existing shutters or panels before and after storms | Check with DBPR; operating existing devices differs from installing new ones | No license |
Florida's definition of contracting includes "the attempted sale of contracting services and the negotiation or bid for a contract on these services" (Fla. Stat. 489.105). A Florida sales company that signs homeowners and hands the job to a licensed installer is itself contracting and needs its own license.
Step 2: Florida licensing path
Pick the right license category
- Window and door installation specialty (rule 61G4-15.100(1)(j)): exterior windows, doors, hurricane protection devices and shutters that do not affect structural changes, except replacing window bucks in a retrofit. The natural fit for a residential window and shutter company.
- Glass and glazing specialty (61G4-15.100(1)(s)): all types of windows and glass, residential and commercial, with no height restriction, plus impact opening protection, storefronts and curtain walls. The fit if you want condo and commercial work.
- Specialty structure (61G4-15.015): shutters at any height; certified window and door assemblies only in Group R buildings up to three stories or 30 feet. Common for aluminum and shutter shops.
- Garage door installation specialty (61G4-15.100(1)(k)) if you will sell wind-rated garage doors.
- Division I (general, building, residential) if you want structural work such as enlarging openings.
Qualify the business
A company contracts through a qualifying agent, an individual who holds the license and has final approval authority for all construction work and business matters, including contracts and payments (Fla. Stat. 489.119). If you are not licensed yourself, you need a licensed qualifier who truly supervises. "Renting" a license is a common route to discipline.
Meet exam eligibility
Florida certification by exam requires being 18, of good moral character, and one of the experience routes in 489.111, such as four years as a skilled worker or foreman with at least one year as a foreman, or a related four-year degree plus one year of experience. Certified specialty licenses use the same procedures (61G4-15.100(2)).
Local requirements
Get a local business tax receipt where you operate. It is not a contractor license (489.127(1)), but selling to the public during a declared emergency without one is a second-degree misdemeanor (Fla. Stat. 501.160(8)). Check whether the counties you serve, such as Miami-Dade, license openings work locally. A state-certified license lets you work statewide without local competency cards.
See Florida licensing for window and shutter installers.
Step 3: Texas startup path
Texas does not license general contractors or window installers, and TDLR's program list includes no such license. That lowers the entry barrier and raises the trust barrier. Coastal homeowners and insurers care about one thing: will the work earn a WPI-8?
- Learn the windstorm system. In the 14 catastrophe-area counties and listed Harris County cities east of Highway 146, file Form WPI-1 before work starts (Tex. Ins. Code 2210.2515(b)), schedule inspections during construction, and deliver the WPI-8 to the owner. TDI says it is normally the contractor who coordinates inspection dates.
- Build engineer relationships. Inspections can be done by free TDI inspectors, who aim to inspect within 48 hours of the requested date, or by TDI appointed engineers, who set their own fees. Know which appointed engineers work in your area and how they handle post-construction inspections for WPI-8-E.
- Use evaluated products. TDI product evaluations, and third-party reports TDI links, are used to certify products for TWIA eligibility. TDI tells owners to use products tested to ASTM E1886 and ASTM E1996.
- Know the 2024 codes. Since April 1, 2026, windstorm certifications use the 2024 IRC or IBC, and TDI says most of the catastrophe area is now in the windborne debris region.
- Register with cities. Many cities require contractor registration or insurance on file to pull permits. Check each city you serve.
- Have a local address. Texas Business and Commerce Code chapter 58 bars disaster remediation contractors from requiring any payment before work begins, unless they have kept a physical business address in the county or an adjacent county for at least a year. A real local office is both a trust signal and a legal advantage after storms.
See Texas window and shutter contractor rules and WPI-8 certification.
Step 4: Insurance and workers' compensation
| Coverage | Florida | Texas |
|---|---|---|
| General liability | Required for certification: at least $100,000 public liability and $25,000 property damage for specialty contractors; $300,000 and $50,000 for general and building contractors (rule 61G4-15.003) | Not required by state law; many cities and most customers will ask for it |
| Workers' compensation | Required in construction for any employer with one or more employees (Fla. Stat. 440.02) | Elective for most private employers (Tex. Lab. Code 406.002); required on public projects (406.096) |
| Owner exemption | Up to three corporate officers, each owning at least 10 percent, may elect exemption; certificate valid 2 years; $50 fee (440.02, 440.05) | Non-subscribers must notify employees and the state (406.004, 406.005) |
| Commercial auto, tools, inland marine | Practical needs, not license conditions | Same |
Florida's exemption covers the officer only, not the crew. Any employees on site must be covered. Florida's Division of Workers' Compensation runs a Construction Policy Tracking database showing contractors' coverage status, and Florida lets local governments fine people who claim to be insured in an ad or bid when the work is not covered (489.119(5)(f)).
Texas non-subscribers lose common-law defenses such as contributory negligence if an injured employee sues (406.033). For a ladder-heavy trade, that exposure is real.
Step 5: Products, approvals and labels
In both states, the product is half the compliance. You cannot fix an unapproved shutter with good installation.
- Florida approval. Windows, doors, shutters and impact protective systems need statewide product approval or local approval under 553.842, and it is a deceptive practice to market any product as hurricane or wind-borne debris protection unless it is approved (553.842(5)).
- Miami-Dade NOA. Miami-Dade's Product Control Section approves building-envelope products. A first-time NOA costs $4,000 plus a 7.5% surcharge and is valid five years; revisions and five-year renewals cost $1,500 each plus the surcharge. That cost falls on the manufacturer or approval holder, not the installer. See NOA lookup.
- Labels and instructions. Florida requires the approval holder to put a permanent label on every shutter showing its name and address, the approval method, test standards and approval number, in set locations such as the bottom of an accordion locking bar or the roll-up hood. Shutters must be installed per the approval, and the installation instructions must be on the job site for the inspector (FBC 1709.9).
- Testing standards. Florida accepts ASTM E1886/E1996, TAS 201, 202 and 203, AAMA 506 and ANSI/DASMA 115 for garage doors, and shutters must be tested at 1.5 times design pressure (FBC 1609.1.2). See missile impact testing standards.
- Texas. Use products with TDI product evaluations or recognized third-party test reports. Keep the report for each job; inspectors and owners will ask.
Can I become a dealer for a window or shutter manufacturer?
Many manufacturers sell through authorized dealers, but each sets its own rules. We could not verify any single manufacturer's current dealer requirements, and this guide does not recommend brands. Questions to get answered in writing before you sign a dealer agreement:
- Does the agreement require a minimum annual purchase, showroom or territory?
- Who holds the Florida approval or NOA, and will the manufacturer keep it current? Expired approvals can stall permits.
- What installation training is required, and does the product warranty depend on it?
- What are lead times in peak season, and what happens to your customers' orders after a storm?
- Who handles warranty service calls?
- Can you sell competing products?
A dealer title is not a license. In Florida your company still needs its own licensed qualifier. In Texas the dealer status is a business relationship, not a credential homeowners can verify with the state.
Step 6: Selling legally and getting leads ethically
Shutters and impact windows are mostly sold in the home. That brings specific rules:
- Three-day cancellation forms. In-home sales over $25 trigger Florida's home solicitation law (contracts must carry the "BUYER'S RIGHT TO CANCEL" statement, 501.031) and Texas chapter 601 (a contract in the language of the sales pitch, a bold notice by the signature line, and a Notice of Cancellation in duplicate). The FTC Cooling-Off Rule also applies to home sales of $25 or more.
- License number everywhere (Florida). Put the number on every bid, contract, ad and company vehicle (489.119(5)).
- Required contract notices (Florida). The Recovery Fund notice for residential contracts over $2,500 (489.1425) and the construction lien warning for direct contracts over $2,500 on homes of up to four units (713.015).
- Texas disclosures. The 53.255 "Know Your Rights" statement before signing and a subcontractor and supplier list before starting (53.256).
- Deposits. In Florida, taking more than 10 percent up front starts a 30-day permit and 90-day start clock (489.126). In Texas, chapter 58 limits post-disaster deposits for contractors without a one-year local address.
- No claim handling. Contractors may not act as public adjusters (Fla. Stat. 626.854; Tex. Ins. Code 4102.163). Texas makes waiving or rebating deductibles a Class B misdemeanor (Bus. & Com. Code 27.02).
- No gouging. Price increases after an emergency declaration must be explainable by your added costs (Fla. Stat. 501.160; Tex. Bus. & Com. Code 17.46(b)(27)).
- Grants. My Safe Florida Home homeowners must use licensed contractors, and the program verifies the license number on each application. The program recommends homeowners get bids from at least three contractors, so expect to compete on clear, itemized proposals.
Ethical lead sources include referrals, permit-ready proposals for homeowners who request quotes, condo and HOA bids under their specifications (Fla. Stat. 718.113(5) and 720.3035(6)), and education at community events, with cancellation forms ready for any sale signed outside your office.
How seasonal is the shutter business?
Very. The Atlantic hurricane season runs June 1 to November 30, with the peak from mid-August to late October, according to the Florida Climate Center. Demand often spikes when a storm is forecast, but that is the worst time to start a custom job: products are made to order, permits take time, and crews are booked.
Plan the year:
| Period | Typical focus |
|---|---|
| December to May | Sales and installation of permanent protection before the season; condo and HOA bid cycles; staff training |
| June to November | Finishing booked jobs, service calls, deployment services, maintenance |
| After a landfall | Inspections, repairs, emergency protection, and a surge in replacement inquiries; also the period when unlicensed operators arrive and price-gouging rules apply |
See lead times and the season.
Should I offer storm deployment services?
Many shutter companies add a service to install and remove existing panels or close accordion and roll-down shutters for owners who travel or cannot do it themselves. Points to settle first:
- Licensing. Hanging an owner's existing approved panels on permanent anchors is operating a device, not installing one, but if your crew repairs tracks or adds anchors, that is installation. In Florida, ask DBPR how your scope should be handled.
- Capacity. Every customer wants service in the same 48 hours. Cap the number of contracts, set a deployment order and put it in writing.
- Safety. Federal OSHA rules require fall protection for employees working 6 feet or more above a lower level in residential construction and near wall openings (29 CFR 1926.501). Ladder work in high winds is the riskiest part of the job.
- Removal rules. Some cities and associations limit how long shutters can stay closed after a storm. See rules on leaving shutters up.
- Condos. A condo board may operate hurricane protection without owner permission only when needed to protect condo or association property (Fla. Stat. 718.113(5)(b)). Contract with the board or the owner, not both.
Labor: what installers earn
Federal wage data help you plan payroll. In May 2025, BLS Occupational Employment and Wage Statistics data showed:
| Occupation and area | Employment | Mean hourly | Median annual |
|---|---|---|---|
| Glaziers, Florida | 6,370 | $23.32 | $47,030 |
| Glaziers, Texas | 5,850 | $22.90 | $47,730 |
| Glaziers, Miami-Fort Lauderdale-West Palm Beach | 2,330 | $21.97 | $44,430 |
| Glaziers, Houston metro | 1,370 | $23.55 | $48,340 |
| Carpenters, Florida | 39,300 | $25.27 | $49,870 |
| Carpenters, Texas | 33,540 | $24.51 | $48,900 |
See careers in shutters and impact windows for more.
What about startup costs and margins?
We did not find a reliable, dated public source for startup costs or profit margins in the shutter or impact window trade, so we do not publish numbers. Be wary of any dealer pitch that promises a margin. Build your own budget from real quotes: licensing and exam fees from DBPR, insurance quotes from an agent, workers' comp premiums, vehicle and trailer, tools, product samples, permit fees in the cities you serve, and, in Texas, engineer fees for post-construction inspections.
Practical equipment for an installation crew usually includes ladders and scaffolding with fall protection, rotary hammers and drills for concrete and block, anchors and fasteners specified by each product approval, sealants and flashing materials, glass-handling tools for impact units, and a way to transport and store panels. The product approval drawings dictate the anchors and spacing, so buy to the approval, not to habit.
How to choose a provider
- Choose your model: installer, sales company, retailer, fabricator or deployment service.
- Florida: pick the license category that fits your work and height range, and secure a qualifying agent.
- Florida: carry at least the rule 61G4-15.003 liability limits and workers' comp for any employees.
- Texas: register with the cities you serve and learn the TDI WPI-1 to WPI-8 process.
- Sell only products with current Florida approval, Miami-Dade NOA or TDI evaluation.
- Build compliant contracts: 3-day cancellation notice, Florida Recovery Fund and lien notices, Texas 53.255 disclosure.
- Put your Florida license number on every ad, bid, contract and truck.
- Never offer deductible waivers or claim handling.
- Plan staffing around June 1 to November 30 and the pre-season rush.
- Train crews on fall protection and the product installation instructions.
Related hurricane shutters and impact windows guides
- Who Can Install Impact Windows and Hurricane Shutters in Florida? Contractor Licensing Under Chapter 489
- Do Texas Window and Shutter Installers Need a License? Registration, Windstorm Inspections and How to Vet Them
- Careers in Hurricane Shutters and Impact Windows: Installer, Estimator, Wind Mitigation Inspector and Windstorm Engineer
- Impact Window and Shutter Contracts: What Must Be in Writing, and Do You Have 3 Days to Cancel?
- How Do You Look Up a Miami-Dade NOA (Notice of Acceptance) and Read It?
- Do You Need a Texas Windstorm Certificate (WPI-8) for New Windows, Doors or Shutters?
- How Long Do Impact Windows Take, and When Is the Best Time to Buy?
- Does My Safe Florida Home Pay for Impact Windows and Doors? 2026 Eligibility, Match and Status
Hurricane shutters and impact windows by state and city
Questions people ask
What license do I need to sell versus install hurricane shutters in Florida?
If you sell installed shutters, you are contracting, because Florida's definition includes the attempted sale, negotiation or bid of contracting services. That means a licensed qualifying agent for your company, whether or not your own crews install. Selling shutter products over the counter with no installation is retail, but the products must still have product approval to be marketed as hurricane protection.
Do I need a Florida workers' comp exemption to start a shutter company?
Only for yourself, and only if you qualify. In Florida construction, workers' comp is required for any employer with one or more employees. Up to three corporate officers who each own at least 10 percent of the corporation can file for an exemption with the Division of Workers' Compensation. The certificate costs $50 and is valid for 2 years. It does not cover employees.
How do I start a shutter or impact window business in Texas?
Form your business, get liability insurance, decide on workers' comp, and register with the cities where you will pull permits. If you will work on the coast, learn the TDI windstorm program: file WPI-1 notices before work, use TDI-evaluated or tested products, schedule inspections during construction and deliver WPI-8 certificates. Build relationships with TDI appointed engineers, and keep a physical local office.
How do I become an MSFH-eligible contractor?
My Safe Florida Home does not run a contractor list in the statute. It requires that grant work be done by properly licensed contractors with all required permits and inspections. Homeowners name their chosen contractor and state license number on the application, and the program verifies it. Be licensed for the scope, pull permits, and give homeowners clear itemized bids. As of November 2026 the program's portal was offline for a platform change.
What are margins in the impact window business?
We could not find a reliable, dated public source on margins for impact window or shutter companies, so we do not quote a figure. Margins vary with product mix, labor costs, permit and engineering requirements and storm cycles. Build a budget from your own quotes for licensing, insurance, labor, vehicles, tools and product costs, and treat any promised margin in a dealer pitch with caution.
Can my shutter company help customers with insurance claims?
Only in limited ways. Florida bars contractors from soliciting, offering to handle or performing public adjuster services unless licensed as public adjusters, though they may suggest the customer check coverage with the insurer. Texas bars contractors from acting as public adjusters on property they repair, even with a license or power of attorney, and makes waiving or rebating deductibles a crime.
Sources
- Fla. Stat. 489.105, definitions
- Fla. Stat. 489.111, licensure by examination
- Fla. Stat. 489.119, business organizations and advertising
- Fla. Stat. 489.126, moneys received by contractors
- Fla. Stat. 489.127, prohibitions
- Fla. Stat. 489.1425, recovery fund notice
- Fla. Admin. Code r. 61G4-15.100, Certified Specialty Contractors
- Fla. Admin. Code r. 61G4-15.015, Specialty Structure Contractors
- Fla. Admin. Code r. 61G4-15.003, Public Liability Insurance
- Fla. Stat. 440.02, workers' compensation definitions
- Fla. Stat. 440.05, election of exemption
- Fla. Stat. 553.842, product approval
- Fla. Stat. 501.160, price gouging
- Fla. Stat. 501.031, home solicitation written agreement
- Fla. Stat. 713.015, lien law notice
- Fla. Stat. 626.854, public adjusters
- Fla. Stat. 718.113, condo hurricane protection
- Fla. Stat. 215.5586, My Safe Florida Home
- Florida Building Code, Building 2023, Chapter 16
- Florida Building Code, Building 2023, Chapter 17
- Miami-Dade County, Product Approval
- Tex. Ins. Code ch. 2210
- Tex. Lab. Code ch. 406
- Tex. Bus. & Com. Code ch. 601
- Tex. Bus. & Com. Code ch. 58
- Tex. Bus. & Com. Code ch. 27
- Tex. Ins. Code ch. 4102
- Tex. Prop. Code ch. 53
- TDI, Windstorm inspection process
- TDI, Product evaluations
- TDI, Adopted codes
- TDLR, regulated programs
- FTC, Cooling-Off Rule consumer guidance
- OSHA 29 CFR 1926.501
- Florida Climate Center, Hurricanes
- DBPR, Construction Industry (Construction Policy Tracking Database link)
- BLS Occupational Employment and Wage Statistics API (May 2025 data)
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


