Local Guide · Hurricane shutters and impact windows
Do You Need a Texas Windstorm Certificate (WPI-8) for New Windows, Doors or Shutters?
How TDI windstorm inspections and WPI-8 certificates work for window, door and shutter jobs on the Texas coast: which counties, who inspects, the 2024 code switch on April 1, 2026, lookups, and what to do if work was never certified.
Yes, in most cases on the Texas coast. In the 14 first-tier coastal counties and the Harris County cities east of State Highway 146, window, entry door, garage door and hurricane shutter installations need a Texas Department of Insurance windstorm inspection and a WPI-8 Certificate of Compliance for the home to be eligible for TWIA coverage. From April 1, 2026, work is certified to the 2024 IRC or IBC.
Key facts
- TDI's windstorm program covers Aransas, Brazoria, Calhoun, Cameron, Chambers, Galveston, Jefferson, Kenedy, Kleberg, Matagorda, Nueces, Refugio, San Patricio and Willacy counties and the Harris County cities east of State Highway 146.
- From April 1, 2026, windstorm certificate applications (WPI-1) must be certified to the 2024 IRC or 2024 IBC; TDI lists the 2018 codes for April 1, 2020 to March 31, 2026.
- TWIA lists windows, entry doors and garage doors among improvements that need a windstorm Certificate of Compliance.
- TDI inspectors are free, inspect only during construction, and aim to inspect within 48 hours of the requested date.
- Since June 1, 2020, TDI issues all certificates; WPI-8-E covers completed construction, and TWIA-issued WPI-8-C certificates (2017 to May 2020) must be found with TWIA's lookup tool.
- Texas Insurance Code s. 2210.258(b) bars TWIA from insuring work begun on or after June 19, 2009 until a certificate is issued, with limited exceptions.
- TDI tells homeowners to use opening protection tested to ASTM E1886 and ASTM E1996; Texas garage doors must be tested to ASTM E330.
- TDI advises not making the final payment until the contractor finishes and TDI issues the WPI-8.
What is a WPI-8, and why does it matter for windows?
A WPI-8 is a Certificate of Compliance issued by the Texas Department of Insurance (TDI). It shows that a building, addition or repair on the Texas coast was inspected and meets the windstorm building code TDI has adopted. "WPI" stands for Windstorm Property Inspection; the 8 is the form number.
The certificate matters because of the Texas Windstorm Insurance Association (TWIA), the state's wind and hail insurer of last resort for the coast. Under Texas Insurance Code chapter 2210, a property must be certified as meeting the windstorm code, with the certificate provided to TWIA, before it is eligible for TWIA coverage. TWIA lists windows, entry doors and garage doors among the common improvements that need a certificate.
So if you live in a covered county and replace windows, install impact doors or add hurricane shutters as your opening protection, you need the work inspected and certified to keep, or later get, TWIA coverage. Even if you have private wind coverage today, a missing certificate can cause problems if you ever need TWIA, sell the house, or file a claim.
Windstorm insurance itself is not required by Texas law, but TDI notes that your mortgage company may require windstorm coverage, and a TWIA policy cannot be bought while a hurricane is in the Gulf.
Which Texas counties need windstorm inspections?
TDI's windstorm program covers the "designated catastrophe areas," also called the first-tier coastal counties. The program dates to 1987 legislation (HB 2012), and TDI inspections began January 1, 1988.
| County | Coverage | TDI field office (800-248-6032, option 4) |
|---|---|---|
| Aransas | Entire county | Corpus Christi |
| Brazoria | Entire county | Angleton |
| Calhoun | Entire county | Angleton |
| Cameron | Entire county | Corpus Christi |
| Chambers | Entire county | Beaumont |
| Galveston | Entire county | La Marque |
| Jefferson | Entire county | Beaumont |
| Kenedy | Entire county | Corpus Christi |
| Kleberg | Entire county | Corpus Christi |
| Matagorda | Entire county | Angleton |
| Nueces | Entire county | Corpus Christi |
| Refugio | Entire county | Corpus Christi |
| San Patricio | Entire county | Corpus Christi |
| Willacy | Entire county | Corpus Christi |
| Harris (part) | Only east of State Highway 146 and inside the city limits of La Porte, Morgan's Point, Pasadena, Seabrook and Shoreacres | La Marque |
TDI says the designated catastrophe areas did not change when it adopted the 2024 codes. Except for Harris County, the whole county is in the program.
Is Houston in the windstorm area?
Most of Houston is not. In Harris County, only structures east of Highway 146 inside the five listed cities are in the program. A home in Houston proper, Dallas, San Antonio or Austin does not need a TDI windstorm certificate, though local building codes and permits still apply. See Texas coastal building codes for windows and the Texas coast county guide.
Coastal Barrier Resource Areas
Property in a federal Coastal Barrier Resource Area (CBRA) must have had a building permit or plat filed with the city, county or U.S. Army Corps of Engineers before June 11, 2003 to be insurable for wind and hail through TWIA. To check, TDI suggests the local county permitting office, the U.S. Fish and Wildlife offices in Clear Lake (281-286-8282) or Corpus Christi (361-994-9005), or the TDI field office.
Do I need a windstorm certificate to replace windows?
Generally yes, in the designated catastrophe areas. Texas Insurance Code s. 2210.251(a) says a structure built, altered, remodeled, enlarged or repaired on or after January 1, 1988 must comply with the TWIA plan of operation to be insurable. Section 2210.2515(b) requires written notice to TDI, on its form, before you start to construct, repair, alter, remodel or enlarge a structure for which TWIA coverage is sought.
| Usually needs inspection and a certificate | Usually does not (TDI list) |
|---|---|
| Replacing windows (TWIA lists windows) | Replacing only the glass in windows or doors |
| Replacing entry doors and garage doors | Decorative shutters |
| Installing hurricane shutters or other windborne debris protection | Screen doors, steps, gutters and fences |
| Additions, patio covers, decks | Painting, carpeting, cabinets and other non-structural items |
| Roof replacement or significant roof repair | Roof repairs under 100 square feet with no decking |
| Re-siding a significant part of a wall | Plumbing and electrical repairs; temporary repairs after a storm |
TDI's advice is to call the local windstorm field office before you start any work and ask whether it needs an inspection. Ask your contractor, in writing, how they will meet the inspection requirement and get the certificate.
WPI-8, WPI-8-E and WPI-8-C: what is the difference?
| Certificate | Issued by | For | How to find it |
|---|---|---|---|
| WPI-8 | TDI | New and ongoing construction, inspected while the work is underway | TDI Windstorm System search |
| WPI-8-E | TDI | Completed construction (applications accepted since June 1, 2020) | TDI Windstorm System search |
| WPI-8-C | TWIA | Completed construction, January 1, 2017 to May 31, 2020 | TWIA certificate lookup tool (not on TDI's site) |
Since June 1, 2020, TDI issues all windstorm Certificates of Compliance. TWIA defines a "completed improvement" as one where title has passed from the builder to the first owner or, if no sale is planned, one that is substantially completed. "Substantially completed" means the final framing stage is done, including components and cladding and windborne debris protection. If the protection is wood structural panels, all the panels must be at the property but need not be installed.
Who performs the inspection: TDI or an engineer?
| Inspector | Ongoing construction | Completed construction | Cost |
|---|---|---|---|
| TDI windstorm inspector | Yes, during the work only (not before or after) | No | Free. TDI tries to inspect within 48 hours of the requested date, excluding weekends and holidays. |
| TDI Appointed Qualified Inspector (appointed Texas-licensed engineer) | Yes | Yes | Set by the engineer. TDI does not regulate or track rates. |
| Any engineer licensed by the Texas Board of Professional Engineers and Land Surveyors (not appointed) | No | Yes | Set by the engineer |
Texas Insurance Code s. 2210.254 says windstorm inspections may be performed only by qualified inspectors approved and appointed or employed by TDI, including licensed professional engineers. TDI's list of appointed engineers is at appscenter.tdi.texas.gov/windstorm/p/publicAQIList.
TDI notes that a post-construction inspection can be more invasive and more expensive than one done during construction. With windows, an engineer may need to see fasteners, anchors, buck attachment and sealant that are hidden once trim and stucco are finished. Schedule the inspection while the work is open.
Step by step: certifying a window, door or shutter job
- Before work starts, file Form WPI-1 (Application for Certificate of Compliance) with TDI. Your contractor usually does this. Some cities that adopted TDI's standard ask for proof of enrollment before issuing a building permit; the WPI-1 or TDI's online record serves as that proof.
- Choose products with a windstorm evaluation. TDI publishes current product evaluation reports on its Windstorm System and links to third-party evaluation reports. Expired reports have been removed. TDI says it does not approve or endorse any product by linking a report.
- Schedule the inspection during installation. With a TDI inspector, call for each phase. With an engineer, confirm when they will visit.
- Fix any deficiencies. A TDI inspector posts a notice describing problems and returns to reinspect after corrections.
- Engineer files the WPI-2-BC verification form (when an engineer inspects). If you receive the forms, you can send them to TDI by mail, fax (512-490-1051) or email (windstorm@tdi.texas.gov).
- TDI issues the WPI-8. TDI says that once paperwork is in order, the certificate is posted online within about three working days, with a hard copy mailed within about a week.
- Tell your insurance agent. TDI sends inspection and WPI-8 information to TWIA electronically each night, but your agent should know about the work too.
Two statutory guardrails: TDI may not issue a certificate for ongoing work if it has not received completed forms and full payment of inspection fees within six months after the final inspection (s. 2210.2515(e)), and once issued, TDI may not rescind a certificate (s. 2210.2515(k)).
TDI also advises coastal homeowners not to make the final payment until the contractor finishes all work and TDI issues the WPI-8 for it. Put that in your contract.
Which building code does TDI use now?
Starting April 1, 2026, WPI-1 applications must be certified under either the 2024 International Residential Code (IRC) or the 2024 International Building Code (IBC). TDI's code table, last updated April 2, 2026:
| Code | Texas Admin. Code | Effective dates (as TDI lists them) |
|---|---|---|
| 2024 IRC / 2024 IBC | s. 5.4013 | 04/01/26 to present (TWIA requirement) |
| 2018 IRC / 2018 IBC | s. 5.4011, s. 5.4012 | 04/01/20 to 03/31/2026 (TWIA requirement) |
| 2006 IRC / IBC with Texas Revisions | s. 5.4011 | 01/01/08 to 08/31/20 |
| 2003 IRC / IBC with Texas Revisions | s. 5.4010 | 01/01/05 to 12/31/07 |
| 2000 IRC / IBC with Texas Revisions | s. 5.4009 | 02/01/03 to 12/31/04 |
| TWIA Building Code for Windstorm Construction | s. 5.4008 | 9/1/1998 to 1/31/2003 |
TDI's table lists the code by zone columns labeled Inland II, Inland I and Seaward; the 2024 and 2018 rows apply in all three. You may see those zone names on older paperwork. Note that TDI's table shows the 2006 and 2018 date ranges overlapping in 2020; if your project fell in that window, ask TDI or your engineer which code applied.
Wind speed and windborne debris
Under the 2024 codes, TDI says the required wind speed must be determined for each structure based on its location, using tools such as the ASCE 7 Hazard Tool, and that most of the designated catastrophe areas are now within the windborne debris region, where glazed openings need impact resistance or protection as specified in the 2024 IRC and IBC.
Older TDI repair guidance says impact-resistant shutters are needed where the wind speed is 140 mph or higher if non-impact windows or glazed doors are installed in a windborne debris area. That page predates the 2024 adoption. For work certified from April 1, 2026, rely on the 2024 code determination for your exact address and confirm with your engineer or TDI.
For what "windborne debris region" and design pressure mean, see design pressure ratings explained and missile impact testing standards.
Product standards TDI expects for windows, doors and shutters
- Impact windows and shutters: TDI tells homeowners to use opening protection tested to ASTM E1886 and ASTM E1996 and designated as such by a recognized product approval. TDI will accept for review products tested to those standards or other approved standards.
- Impact protective systems (shutters and similar): must also be tested to ASTM E330, using the edition in TDI's adopted building specifications.
- Garage doors: must be tested to ASTM E330 in Texas, and glass panels should be rated to ASTM E1996. TDI says garage door failures contributed to 80 percent of home failures in recent hurricanes; TDI gives no study citation for that figure. If the door has glass, TDI suggests an impact-resistant door.
- Skylights: should be tested to ASTM E1886 and E1996 or other approved standards.
- Tested as a unit: TDI says impact windows are tested as a unit that includes the glass, frame, attachment hardware and installation method, so installation must follow the manufacturer's instructions.
- Force 12 is not enough: TDI warns that a product rated for "Force 12" winds meets only the minimum of a Category 1 hurricane (74 mph).
- Aluminum vs. galvanized steel shutters: TDI says if both are tested and qualified to the same impact and pressure standard, they should perform the same.
- Both shutters and impact windows are not required. TDI says adding shutters over impact windows adds protection but is not necessary.
For panels that are not permanently mounted, TDI advises having the installer pre-mark each panel and leave a layout plan and instructions, then practicing on one or two openings before a storm. See storm panels and when to put up shutters.
Do shutters need a WPI-8? What about plywood?
Functional hurricane shutters, yes. When shutters are the windborne debris protection for an opening, they are part of what the inspection certifies. TDI's list of work that does not need an inspection includes only decorative shutters.
Plywood or OSB: TDI lists three choices for protecting openings: impact-resistant windows and doors, hurricane shutters custom fitted to openings, and, as an emergency measure, properly installed plywood panels. Its repair guidance says wood structural panel shutters may be possible depending on whether the panels can be properly secured and permanent fasteners installed into the wall framing. TWIA's definition of "substantially completed" also recognizes wood structural panels as windborne debris protection, requiring the panels to be present but not installed. Whether plywood will pass for your home depends on the 2024 code requirements for your wind speed, building height and opening sizes, so ask your engineer before you rely on it. See plywood hurricane protection rules.
Getting TWIA credit by protecting openings a few at a time
TDI says TWIA offers wind and hail discounts for new homes built to the IRC or IBC, and a discount for existing structures that retrofit their exterior openings with windborne debris resistant products. To learn the current discount, contact TWIA at 800-788-8247 or twia.org.
You can spread the work out. TDI says you must get an inspection for each windborne debris resistant product you install. If a Texas-licensed engineer does the inspections, the engineer files the WPI-2-BC verification for each one, and on the final product checks the box that tells TDI all exterior openings are protected. TDI records each approved inspection.
Plan for the retrofit credit from the start: tell the engineer you are phasing the work, keep every certificate, and make sure the final form shows that all openings, including the garage door and any skylights, are protected. See TWIA coverage and opening protection.
What if my windows were installed without an inspection?
You have two paths: get the completed work certified, or accept the insurance consequences.
Certify completed construction (WPI-8-E)
- Hire a Texas-licensed professional engineer. Any engineer licensed by the Texas Board of Professional Engineers and Land Surveyors can inspect completed construction.
- The engineer submits a signed WPI-2E application through TDI's Windstorm System, plus a sealed post-construction inspection report with supporting documentation, or a sealed design, in PDF.
- Requirements are in Texas Insurance Code s. 2210.2515 and 28 Texas Administrative Code s. 5.4604 (submission) and s. 5.4606 (supporting evidence). Each document emailed to TDI needs the structure's address and Application ID.
- Expect the engineer to need product documentation, photos and possibly to open up trim or stucco at sample openings to see fasteners. Gather your contractor's invoices, product labels and any installation photos first.
Insurance consequences if you do not certify
- Work begun on or after June 19, 2009: under s. 2210.258(b), TWIA may not insure it until a certificate is issued, with exceptions for certain private-market nonrenewals and a temporary policy of up to 30 days.
- Surcharges: TWIA says uncertified residential properties with construction from 1988 to June 18, 2009 may still be eligible with a 15 percent premium surcharge. Under s. 2210.259, a noncompliant home TWIA insures after a private-market cancellation or nonrenewal pays voluntary-market-based rates plus a 10 percent annual surcharge; other noncompliant residential structures pay 15 percent. TWIA's page mentions only the 15 percent figure.
- Homes built before 1988: TDI says these can be TWIA-eligible under certain conditions, often using TWIA's BC-10-85 building certification, but all construction after that must be inspected and certified to keep coverage.
How to look up a WPI-8 certificate
- Go to TDI's Windstorm System search at appscenter.tdi.texas.gov/windstorm/p/searchForAppl. TDI publishes all WPI-8 and WPI-8-E certificates there.
- Search by address. Try variations (for example "Street" vs. "St") and check the city name the record uses.
- If nothing shows and the work was certified as completed construction between January 1, 2017 and May 31, 2020, use TWIA's certificate lookup tool for WPI-8-C certificates.
- Still nothing? Call the Windstorm Inspections Program at 800-248-6032, option 3.
Wrong address on the certificate? If a TDI inspector did the work, send TDI a written request to correct the record and TDI will issue a revised WPI-8. If an engineer did it, ask the engineer to submit revised WPI-1 and WPI-2-BC forms.
Buying a home? TDI says it is in your interest to require the builder to furnish a Certificate of Compliance on a new home. For existing homes, check certificates for the roof, windows, doors and any additions before closing, and ask your insurance agent whether anything is missing. A missing window certificate can mean a surcharge or ineligibility for TWIA.
Choosing a contractor for windstorm-certified work
TDI's guidance for coastal repairs:
- Verify the contractor's name, address, phone number and references, and that they have insurance or a bond.
- Get at least three written bids and copies of all signed agreements and warranty terms.
- If you need a WPI-8, confirm the repair or replacement is eligible.
- Do not make the final payment until all work is done and TDI issues the WPI-8.
- Avoid contractors going door to door for damage repair.
TDI's warning signs: contractors who are not familiar with the Windstorm Inspections Program, take only cash, have only out-of-state references or no local address, want money before materials are on site, are not established, lack insurance or a bond, or offer "specials" or "extra-cheap work." Texas has no statewide license for window and shutter installers; see Texas window and shutter contractor rules and storm chaser scams.
How Texas certification compares with Florida
| Topic | Texas coast | Florida |
|---|---|---|
| Who checks compliance | TDI windstorm inspectors or appointed engineers, for TWIA insurability | Local building departments through permits and inspections |
| Product proof | Tested products with TDI or third-party evaluation reports | Florida Product Approval or Miami-Dade NOA required by s. 553.842 |
| Proof for insurance | WPI-8 / WPI-8-E certificate | Permit records plus the Uniform Mitigation Verification Inspection Form (OIR-B1-1802) |
| Code in force | 2024 IRC/IBC for certification from April 1, 2026 | Florida Building Code 8th Edition (2023), effective Dec. 31, 2023 |
| Where it applies | 14 coastal counties plus parts of Harris County east of SH 146 | Statewide code, with the wind-borne debris region and the HVHZ (Miami-Dade and Broward) |
| Grants | No statewide grant program found | My Safe Florida Home |
For Florida's side, see Florida product approval lookup, Florida hurricane window permits and the Florida overview.
How to choose a provider
- Confirm your property is in a designated catastrophe area (14 counties or the Harris County cities east of SH 146).
- Call the TDI field office or ask your engineer whether your project needs an inspection.
- Make sure the contractor files Form WPI-1 before work starts.
- Choose products with a current TDI or third-party windstorm evaluation report.
- Schedule inspections while fasteners and anchors are still visible.
- Hold final payment until TDI issues the WPI-8.
- Look up and save the certificate from TDI's Windstorm System.
- Send the certificate to your insurance agent and ask about TWIA retrofit discounts.
- If work was done without inspection, hire a Texas-licensed engineer for a WPI-8-E.
- Before buying a coastal home, check for certificates on windows, doors, roof and additions.
Related hurricane shutters and impact windows guides
- How Does TWIA Windstorm Insurance Treat Impact Windows, Shutters and Window Claims?
- What Building Codes Apply to Windows and Shutters on the Texas Coast?
- Do Texas Window and Shutter Installers Need a License? Registration, Windstorm Inspections and How to Vet Them
- Hurricane Protection on the Texas Coast by County: Galveston, Houston-Area Cities, the Coastal Bend and the Rio Grande Valley
- Missile Impact Tests Explained: What Are the Large and Small Missile Tests, ASTM E1996/E1886 and TAS 201/202/203?
- Design Pressure (DP) Ratings Explained: What Do DP50 and +60/-70 psf Mean for Your Windows?
- Can You Use Plywood for Hurricane Shutters? Code Rules, Thickness, Fasteners and Where Plywood Is Not Allowed
- How Do You Spot Hurricane Window and Shutter Scams and Storm Chasers?
Hurricane shutters and impact windows by state and city
Questions people ask
What is a WPI-8 certificate?
A WPI-8 is the Certificate of Compliance the Texas Department of Insurance issues after a structure, addition or repair in a designated coastal area is inspected and found to meet the windstorm building code. TWIA requires a certificate before property is eligible for its wind and hail coverage. WPI-8 covers ongoing construction; WPI-8-E covers completed construction certified since June 1, 2020.
Do I need a windstorm certificate to replace windows in Texas?
If the home is in one of the 14 designated coastal counties or the Harris County cities east of State Highway 146, generally yes. TWIA lists windows, entry doors and garage doors among improvements that need certification, and Texas Insurance Code s. 2210.2515 requires notice to TDI before the work starts. Replacing only the glass does not require an inspection, according to TDI.
Is Harris County part of the TWIA area?
Only a small part. Structures must be east of State Highway 146 and inside the city limits of La Porte, Morgan's Point, Pasadena, Seabrook or Shoreacres. Most of Houston and the rest of Harris County are outside the windstorm program, though local codes still apply.
Who performs windstorm inspections, TDI or engineers?
Both. TDI inspectors inspect during construction for free and try to come within 48 hours of the requested date. TDI Appointed Qualified Inspectors, who are Texas-licensed engineers, can inspect ongoing or completed work. Any Texas-licensed engineer can inspect completed construction for a WPI-8-E. TDI does not regulate engineers' fees.
How do I look up a WPI-8?
Search TDI's Windstorm System at appscenter.tdi.texas.gov/windstorm/p/searchForAppl, where TDI publishes all WPI-8 and WPI-8-E certificates. For WPI-8-C certificates TWIA issued for completed construction between January 1, 2017 and May 31, 2020, use TWIA's certificate lookup tool. You can also call TDI at 800-248-6032, option 3.
What happens if my windows were not certified?
You can have a Texas-licensed engineer inspect the completed work and apply for a WPI-8-E with a signed WPI-2E and a sealed inspection report. If you do not, TWIA may not insure work begun on or after June 19, 2009 until it is certified, with limited exceptions, and some uncertified homes pay a 10 or 15 percent surcharge under s. 2210.259.
Do shutters need a WPI-8?
If the shutters are your windborne debris protection, yes, they are part of the certified work. Only decorative shutters are on TDI's list of items that do not need an inspection. Shutters should be tested to ASTM E1886 and E1996, and impact protective systems to ASTM E330, with a product evaluation the inspector can verify.
What building code does TDI use now?
For windstorm certificate applications from April 1, 2026, TDI requires the 2024 International Residential Code or 2024 International Building Code. TDI's table lists the 2018 IRC and IBC from April 1, 2020 through March 31, 2026. TDI says most designated catastrophe areas are now inside the windborne debris region under the 2024 codes.
How long does windstorm certification take?
TDI inspectors try to inspect within 48 hours of the requested date, excluding weekends and holidays, though big storms can slow that. After approval, TDI says the WPI-8 is usually posted online within about three working days and a paper copy is mailed within about a week. Completed-construction certificates take longer because the engineer must document hidden work.
Do I need a WPI-8 to buy TWIA coverage?
For most work, yes. Texas Insurance Code chapter 2210 requires certification before property is TWIA-eligible, and s. 2210.258 bars TWIA from insuring work begun on or after June 19, 2009 until a certificate is issued, except in limited cases such as certain private-market nonrenewals and a temporary policy of up to 30 days. Homes built before 1988 have separate rules.
Can I protect openings in stages and still get the TWIA discount?
Yes. TDI says each windborne debris product you install needs its own inspection. If an engineer inspects, they file a WPI-2-BC form for each one, and on the last one they check a box telling TDI all exterior openings are protected. Contact TWIA for the current discount amount.
Sources
- TDI Windstorm Inspection Program, general information and code table
- TDI Adopted Building Codes (2024 IRC/IBC from April 1, 2026)
- TDI Windstorm Inspections home
- TDI, What is the Windstorm Inspection Program? (general questions)
- TDI, Windstorm inspection process FAQ
- TDI, Completed construction certificates
- TDI, What you need to know about windstorm inspections
- TDI, Questions to ask before installing opening protection
- TDI, Questions to ask your contractor before you build or repair
- TDI, Making repairs after a storm
- TDI, Product evaluations
- TDI, Designated catastrophe areas map
- TDI, WPI-8 fact sheet (PDF)
- TDI, What is windstorm insurance?
- TWIA, Windstorm certification
- Texas Insurance Code ch. 2210
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


