Local Guide · Hurricane shutters and impact windows
Do You Need a Permit for Impact Windows, Doors and Shutters in Florida? Process, Documents, Fees and Inspections
How Florida permits for impact windows, doors and hurricane shutters work in 2026: who pulls them, what to submit, review deadlines, fees, inspections, the new $7,500 exemption, and how Texas differs.
Yes. In Florida you almost always need a building permit to install hurricane shutters, impact windows, exterior doors or garage doors. A licensed contractor usually pulls it, though owners may act as owner-builders on their own homes under s. 489.103(7). Expect to submit the product approval (Florida FL number or Miami-Dade NOA), design pressures for each opening and a drawing of the openings, then pass inspections. A 2026 $7,500 exemption exists, but it excludes flood zones and structural work.
Key facts
- Section 553.842(5), Florida Statutes, bars advertising or selling a product as hurricane or wind-borne debris protection unless it is approved under s. 553.842 or s. 553.8425.
- FBC Building 107.1.1 waives sealed drawings for same-size window, door and garage door replacements on existing one- and two-family homes and townhouses that meet current design pressures and are installed per the manufacturer's instructions.
- Miami-Dade requires the current NOA or Florida approval for each window, door, garage door, shutter and panel, and accepts Florida Building Commission approvals.
- Chapter 2026-63 (HB 803), effective July 1, 2026, exempts some single-family work valued under $7,500 from permits, but not in flood hazard areas or for electrical, plumbing, structural, mechanical or gas work.
- Section 553.792 sets permit review deadlines (for example 30 business days for many residential permits under 7,500 square feet) and cuts fees 10 percent per business day when local governments miss them.
- Section 553.791 lets owners use a private provider for plan review and inspections, and expressly lists door and window replacements as single-trade inspections.
- A binding interpretation of FBC 110.8.1 ratified January 26, 2026 requires threshold inspections by a certified Special Inspector for window and door installations in threshold buildings, per Miami-Dade.
- Under s. 553.79, a single-family permit expires one year after issuance or at the next Florida Building Code edition, whichever is later; the 9th Edition (2026) takes effect December 31, 2026.
- Miami-Dade charges an extra 100 percent of the usual permit fee to permit work already done without a permit.
- In Texas, coastal owners seeking TWIA coverage must notify TDI (Form WPI-1) before work starts; TDI inspections are free and certificates (WPI-8) are required for window, door and garage door work.
Do you need a permit for hurricane shutters, impact windows or impact doors in Florida?
In almost every case, yes. Florida treats windows, exterior doors, garage doors, skylights and shutters as part of the building envelope, the shell that keeps wind and rain out. Changing any of them changes how the house handles hurricane wind pressure, so local building departments require a permit and at least one inspection.
Miami-Dade County, for example, publishes separate permit checklists for replacement windows and glass doors, garage doors, exterior doors, new window openings, security bars, skylights and glass block, and shutters and storm panels. Each checklist asks for the product's approval document, a drawing of where the products go, and the square footage of the work. Other counties and cities use different forms, but the core idea is the same across the state: the building official must see that each product is approved for your wind zone and installed the way its approval says.
There are three narrow situations where a permit might not be required, and each has strict limits:
- The new $7,500 exemption. Starting July 1, 2026, a state law exempts some work on single-family homes valued under $7,500. It does not apply in flood hazard areas or to structural work, and it is not clear that window or shutter work qualifies. See the section on the exemption below before relying on it.
- Post-disaster waivers. Some cities waive certain permits after a declared disaster, but only when the local emergency order says so. Tampa's guide, for example, waives size-for-size front or rear exterior door replacement after the Mayor uses emergency powers, but it never waives garage door permits.
- Repairs that are not replacements. Replacing a broken lock or weatherstripping is not the same as replacing a window. Your building department decides where repair ends and replacement begins.
If you are unsure, call your building department before work starts. A permit costs far less than tearing out an installed window because an inspector could not see the fasteners. For the product side of the process, see our guides to the Florida Product Approval lookup and the Miami-Dade NOA lookup.
Why does a permit matter for hurricane protection?
A permit is how the state checks three things you cannot easily check yourself.
- The product is approved. Florida law, section 553.842(5), Florida Statutes, says windows, exterior doors, skylights, shutters and impact protective systems must be approved through the statewide product approval system (or a local approval under s. 553.8425). It also says a product may not be advertised, sold or marketed as hurricane, windstorm or wind-borne debris protection unless it is approved. Selling unapproved products that way can bring action under the Florida Deceptive and Unfair Trade Practices Act.
- The product is strong enough for your house. Every opening on a house has a required design pressure, measured in pounds per square foot (psf). Corners and higher floors usually need more. Miami-Dade's permit checklist asks the applicant to show the required positive and negative design pressures for each window or door, usually taken from the product approval's "Design and Pressures Rating (psf)" table. See design pressure ratings explained.
- The product is installed the way it was tested. A window or shutter passes its tests only with a specific set of anchors, spacing and edge distances. The Florida Building Code requires impact-resistant coverings to be installed per the manufacturer's instructions and the product approval, and the installation instructions must be available to the inspector on the job site (FBC Building 1709.9.4).
The permit record also follows the house. Wind mitigation inspectors, insurers, buyers and appraisers use it as proof that the work was done and approved. Florida's uniform mitigation form, OIR-B1-1802 (Rev. 04/26), requires at least one photo or document proving each feature the inspector marks, and Citizens Property Insurance tells policyholders to give inspectors product approval letters so features that are not clearly marked still earn discounts. A finaled permit with the product approval numbers attached is one of the strongest documents you can hand over. See how opening protection is graded on the wind mitigation form.
If you plan to apply for a My Safe Florida Home grant, permits are not optional: s. 215.5586 requires that grant-funded work have all required local permits and inspections and be done by properly licensed contractors.
The 2026 $7,500 permit exemption: does it cover windows or shutters?
Chapter 2026-63, Laws of Florida (CS/CS/HB 803), approved May 6, 2026, added a new rule to s. 553.79(1)(g), Florida Statutes, effective July 1, 2026. It says a local government that issues building permits "shall exempt an owner of a single-family dwelling or the owner's contractor from the requirement to obtain a building permit to perform any work valued at less than $7,500 on the owner's property."
The exemption has important limits written into the statute:
- It does not apply to work on a property that is partly or entirely in a flood hazard area as defined by the Florida Building Code. Much of coastal Florida is in a flood hazard area.
- It does not apply to "any electrical, plumbing, structural, mechanical, or gas work" on a property with a single-family home.
- A project may not be split into smaller projects to get under $7,500.
- The owner or contractor must submit a written request for exemption to the local building department, with a copy of the contract or other documents showing the nature and value of the work.
- The local government has no legal duty to the owner, contractor or later owners for exempted work.
Our reading: do not assume window, door or shutter work qualifies. The statute does not mention windows or shutters by name. Window and door replacement must be designed to meet the wind-load chapter of the building code (FBC Existing Building 707.4), and many building officials treat wind-load-resisting work as structural. Most impact window projects for a whole house also exceed $7,500. We could not find any state or local guidance that clearly places window or shutter replacement inside the exemption. Ask your building department in writing before skipping a permit.
The City of Orlando has already set up an online exemption request. Its process is: check eligibility, confirm the property is not in a flood zone, prepare the contract or documents showing the value of the work, submit the request, and wait for review, which the city says takes up to five business days. You can then check the status in its permit lookup site. Even if the exemption applies, you still need an approved product installed correctly, and you lose the permit record that insurers and buyers rely on.
The same 2026 law also created a separate exemption for certain temporary residential hurricane and flood protection walls or barriers installed by a licensed contractor (s. 553.79(h)). That exemption is about flood barriers, not shutters or windows.
Who pulls the permit: the homeowner or the contractor?
Usually the licensed contractor pulls the permit, and that is the safest path for most homeowners. The contractor's name and license go on the permit, and the contractor is responsible for passing inspections.
What license the contractor needs
Florida licenses window and shutter work through the Construction Industry Licensing Board. Since May 5, 2024, rule 61G4-15.100 also offers certified window and door installation, glass and glazing, and garage door installation specialty licenses. Rule 61G4-15.015, Florida Administrative Code, defines the Specialty Structure Contractor, whose scope includes doors and windows and hurricane protection devices, including installing or replacing windstorm protective devices. That rule lets a Specialty Structure Contractor install windstorm protective devices (other than impact-resistant glazing) without a height limit, but limits installation of window and door assemblies to Group R buildings up to three stories or 30 feet. General, building and residential contractors (Division I) may subcontract window and door installation on taller residential buildings to Specialty Structure Contractors. No Specialty Structure Contractor may do work that changes the building's structure, such as lintels, load-bearing walls or roof trusses. Miami-Dade notes that residential accordion shutter and storm panel permits can be obtained by licensed contractors through its E-Permitting system. Learn more in Florida licensing for window and shutter installers.
The owner-builder option
Florida law lets property owners act as their own contractor in limited cases. Section 489.103(7), Florida Statutes, exempts owners who build or improve a one-family or two-family home on their own property "for the occupancy or use of such owners and not offered for sale or lease," while providing direct, onsite supervision of all work not performed by licensed contractors. The key conditions are:
- It must be your own home, for your own use. If you sell or lease the house within one year after the work is finished, the law presumes the work was done for sale or lease, which can put you outside the exemption.
- You must supervise everything yourself. You cannot hand supervision to an unlicensed person. Anyone you hire who acts as a contractor is not covered by your exemption.
- You must sign in person and acknowledge a disclosure statement. The statute says the owner "must personally appear and sign the building permit application" and the permitting agency gives the owner a disclosure statement. It begins: "I understand that state law requires construction to be done by a licensed contractor and have applied for an owner-builder permit under an exemption from the law."
Local practice varies. Jacksonville says a homeowner may permit work on a primary residence that is not for sale or rent and whose name is on the deed, and the homeowner must appear in person at the Building Inspection Division at 214 N. Hogan St., Room 280. Miami-Dade says owner-builders sign a form acknowledging their responsibilities, and its checklists note an additional form is required when you apply as an owner-builder. Tampa's post-hurricane guide includes an Owner Builder Acknowledgement as an appendix.
Should you be an owner-builder for impact windows?
Think hard first. As owner-builder, you are the one responsible for meeting the product approval's anchoring schedule, for wood buck details, for design pressure on every opening, and for passing inspections. If you hire an installer who is not licensed and act as owner-builder to cover them, that does not make the arrangement legal: the statute says the exemption does not apply to anyone who has a contract with the owner and acts as a contractor. During a declared state of emergency, unlicensed contracting is a third-degree felony under s. 489.127. A homeowner who wants to save money is usually better served by getting several written quotes from licensed contractors, as My Safe Florida Home recommends (at least three bids).
Do you need HOA or condo association approval before the permit?
Often yes, and Florida now has specific rules about the order of approvals.
Homeowners' associations (chapter 720)
- Section 720.3035(6) requires every HOA board or architectural committee to adopt hurricane protection specifications that comply with the building code. It applies to all HOAs, regardless of when the community was created.
- The HOA may not deny an application to install, enhance or replace hurricane protection that conforms to its specifications, even if the governing documents say otherwise. It may require you to follow an existing unified building scheme for appearance.
- Hurricane protection, as defined in 720.3035(6)(c), includes permanent fixed storm shutters, roll-down track shutters, impact-resistant windows and doors, polycarbonate panels and reinforced garage doors, among other items.
- New in 2026: chapter 2026-63, effective July 1, 2026, added 720.3035(1)(c), which says an HOA or its architectural committee may not require a government building permit as a prerequisite for its review of an owner's improvement. In plain terms, the HOA must review your plan even if you do not yet have a permit.
- If the HOA denies an application, 720.3035(4)(a) requires written notice citing the specific rule or covenant and the specific part of your proposal that does not conform.
Miami-Dade's local HOA attestation rule
Miami-Dade's shutter permit checklist says that, under the Miami-Dade County Code, permanent storm shutters, sometimes known as accordion shutters, require the expressed approval of the homeowner's association before the county issues the permit. So in Miami-Dade, get the HOA approval first and include the attestation with your permit package. Miami-Dade also says zoning review and approval are required to install, repair or replace permanent storm shutters on commercial buildings, including condominiums and apartment buildings.
Condominiums (chapter 718)
Section 718.113(5) requires condo boards to adopt hurricane protection specifications, and a board may not refuse a unit owner's installation or replacement that conforms to those specifications. In many condos, windows and doors are the association's responsibility or are part of a building-wide project. Tampa says that although a condominium has a residential occupancy, a commercial permit is required, so condo window work in Tampa does not go through the simple residential permit path. See condo hurricane protection under s. 718.113 and HOA hurricane protection under s. 720.3035.
What documents do you need for a Florida window, door or shutter permit?
Requirements vary by jurisdiction, but Miami-Dade's published checklists are the most detailed in the state and are a good model of what any Florida building department will want to see. The table below summarizes them.
| Project (Miami-Dade checklist) | Permit category on the application | What you must submit |
|---|---|---|
| Replacement windows, mullions and glass doors | 82 and/or 83 (commercial and residential) | Application; total square footage of windows or glass doors; master permit number if a sub-permit; a frontal elevation of each wall showing which windows are replaced, with the product approval number of each window and mullion size; the current NOA or Florida approval for each product |
| New windows, mullions and glass doors | 82 and/or 83 | Plans showing location, required positive and negative design pressures of each unit, the NOA for each product (a separate one for each product type), and the glass type, thickness and options chosen from the approval's glass schedule, including mullion sizes and connections |
| Exterior doors (not mostly glass) | 104 (commercial and residential) | Application; square footage of doors; elevation of each wall showing doors replaced; current NOA or Florida approval of each door |
| Garage doors | Separate stand-alone checklist | Square footage; elevation of each wall with doors replaced; current NOA or Florida approval for each door |
| Shutters and storm panels | 101 for removable panels, 29 for permanent shutters | Application; square footage of panels or shutters; drawing of the openings protected with the building's mean roof height and which product goes on each opening; current NOA of each shutter or panel, marked to show the panel and connection used; HOA attestation for permanent shutters |
| Glass block and skylights (with a master permit) | Part of master permit | Drawing with size, location, mean roof height and product approval number; NOA of each system |
| New window or door openings, or blocking up openings | 02 residential or 01 commercial, plus 82/83 for glass | Square footage and value; standard county details or custom details signed and sealed by an architect or engineer; for new openings, design pressures and NOAs |
Miami-Dade says incomplete or illegible applications will not be accepted. It also says Florida Building Commission product approvals are acceptable in place of a Miami-Dade NOA for these permits.
Do you need an engineer's sealed drawings?
Often not, for a simple same-size replacement on a house. Florida Building Code, Building, section 107.1.1 says sealed drawings by a design professional are not required to replace windows, doors or garage doors on an existing one-family or two-family home or townhouse if all four conditions are met:
- The units are installed according to the manufacturer's instructions for the right wind zone.
- The units meet the design pressure requirements of the most recent Florida Building Code, Residential.
- A printed or digital copy of the manufacturer's instructions is submitted with the permit application.
- The units are the same size and go in the same opening as the existing ones.
If you are enlarging an opening, changing a window to a door, adding a mullion system the approval does not cover, or working on a larger building, expect to need sealed drawings or calculations.
The design pressure and the "window schedule"
Contractors often attach a window schedule: a table listing each opening, its size, location (corner zone or not), required design pressure, the product and its approval number, and its rated design pressure. Miami-Dade requires the required positive and negative design pressures for each window or door on the plans. The rated pressure of each product must meet or exceed the required pressure for its opening. A typical wind load calculation uses the code's wind speed for your site, the exposure category and the mean roof height. Our guide to design pressure ratings explains how those numbers are set.
Other papers that often come up
- Notice of Commencement. Many jurisdictions require a recorded Notice of Commencement before the first inspection on larger jobs. Orlando says you must submit a recorded Notice of Commencement if your permit's contract price is greater than $5,000 and you need to schedule an inspection. Jacksonville says a copy of the recorded notice must be provided before requesting any inspections and displayed on the job site.
- Product approval documents. The NOA or Florida approval, including the installation drawings, anchoring schedule and glass schedule. Mark the options you are using.
- Owner-builder forms, if you are pulling the permit yourself.
- HOA attestation, where local code requires it (Miami-Dade, permanent shutters).
One thing a local government may not demand: section 553.79 says a local government may not require a contract between the builder and owner, copies of the contract, or associated documents such as material cost lists, labor costs or profit statements, as a condition of issuing a permit or accepting an application. (The separate $7,500 exemption request is different: there, the statute asks for a copy of the contract or other proof of value.)
High-rise and condo buildings: the 2026 threshold inspection rule
If your window or door work is in a "threshold building," the rules changed in 2026. Miami-Dade reports that, based on a binding interpretation of Florida Building Code (2023) section 110.8.1 issued by the Building Officials Association of Florida and ratified by the Florida Building Commission on January 26, 2026, all installation of windows and doors in threshold buildings requires a threshold inspection by a State of Florida certified Special Inspector, plus a special inspection plan from the engineer of record. Miami-Dade says these requirements are now active throughout Florida.
Miami-Dade lists a threshold building as any building greater than three stories, any building greater than 50 feet tall, or an assembly occupancy over 5,000 square feet with an occupant content greater than 500 people. Jacksonville's homeowner permitting page also describes threshold buildings as needing an inspection plan from the architect and structural engineer of record and a retained special inspector who reports to the building official.
For threshold-building window and door permits, Miami-Dade now asks for:
- Building data showing whether the building is a threshold building (FBC 107.2.1).
- Location of the units being installed.
- Wind calculations for all openings in the new installation (FBC 107.3.5(8), section 1620 and ASCE 7-22 chapter 30).
- Wood buck calculations where the buck is 1 1/2 inches thick or more (FBC 1710).
- A Threshold Building Affidavit and a Special Inspector form for the window and door installation (buck and fasteners), both signed and sealed by an engineer or architect certified as a threshold inspector.
- A threshold inspection plan from the design professional of record.
For condo owners, this means a unit owner replacing windows in a tall building should expect engineering costs and an inspection plan, not a simple homeowner permit. Coordinate with the association before ordering products. See high-rise condo window replacement projects.
How long does a window permit take in Florida?
Florida has a statewide clock for building permit review, in section 553.792, Florida Statutes. Unless the applicant waives the timeframes in writing, a local government using its own plans reviewer must approve, approve with conditions, or deny a complete and sufficient application within set periods. The ones most relevant to window and shutter work are:
| Permit type (local plans reviewer) | Deadline after a complete, sufficient application |
|---|---|
| Existing single-family home, work valued under $15,000, for structural, accessory structure, alarm, electrical, gas, irrigation, landscaping, mechanical, plumbing or roofing permits | 5 business days |
| Residential units, including single-family homes, under 7,500 square feet (listed permit types) | 30 business days |
| Residential units 7,500 square feet or more | 60 business days |
| Signs or nonresidential buildings under 25,000 square feet | 60 business days |
| Multifamily residential up to 50 units | 60 business days |
Note that the statute lists specific permit types. Window and shutter permits are not named separately, so how your building department categorizes them affects which deadline applies. Ask which category your permit falls into.
Other parts of the timing law
- Completeness notice. Within 5 business days after receiving your application, the local government must tell you in writing what, if anything, is missing. If it does not, the application is automatically deemed complete.
- Fee reductions for missed deadlines. If the local government misses a deadline, it must reduce the permit fee by 10 percent for each business day it is late, unless the delay is agreed in writing, caused by the applicant, or due to force majeure. It does not have to reduce the fee if it sends written notice in time explaining why the application fails the code, and giving the applicant 10 business days to correct it.
- Corrections. If you submit corrections within those 10 business days, the agency has 10 business days to approve or deny. If it misses that deadline, the fee drops by 20 percent for each business day late, unless you agree in writing to more time.
- No forced waivers. A local government may not require you to waive the timeframes as a condition of reviewing your application.
- Posted procedures. Each local government must keep a policy on its website for expedited processing of permits that the law requires to be expedited.
In practice, simple residential window and shutter permits are often faster than the statutory maximum, and some cities offer same-day paths. Tampa notes that some shutter and awning projects may qualify for its "Fast Pass-Same Day" application. Real-world speed depends on how complete your package is: an application missing the NOA, design pressures or elevations will bounce, and the clock only runs on a complete and sufficient application.
How long does Miami-Dade take? We could not find a published current turnaround figure from the county, so we do not quote one. Miami-Dade offers in-person consultations with plan reviewers and inspectors (MeetQ) and a homeowner assistance team (CHAT) for permitting guidance.
How much does a window or shutter permit cost?
Permit fees are set locally, so there is no single Florida price. We do not quote dollar amounts here because we did not find a current, published flat fee that would apply across jurisdictions. Here is what Florida law and local rules say about how fees work:
- Fees vary by project. Miami-Dade says permit fees vary depending on the type of permit, the work, the type of home, the square footage and the estimated worth or value of the project. Miami-Dade collects upfront processing fees to start plan review; the upfront fee covers an initial review and one follow-up review per discipline, and a rework fee applies to each additional follow-up review.
- Fees can change each year. Miami-Dade announced that, effective October 1, permit fees increase because of Consumer Price Index adjustments, applying to applications submitted on or after October 1 or when the fee is assessed.
- Inspection fees are capped by law. Section 553.79 says inspection fees may not be based on the total cost of a project and may not exceed the actual inspection costs incurred by the local enforcement agency.
- Fee schedules must be public. Section 553.80 requires local governments that charge fees to post a building permit and inspection utilization report on their website and update it.
- Late reviews cut the fee. The 10 percent and 20 percent per-day reductions in s. 553.792 apply when local governments miss review deadlines.
- Private providers can reduce the fee. If you or your contractor hire a private provider for plan review or inspections, s. 553.791 requires the local government to reduce the permit fee by the cost savings it realizes, and it may not charge plan review or inspection fees for services the private provider performs.
- Work done without a permit costs more. Miami-Dade charges an additional fee of 100 percent of the usual permit fees for permits for work already done without one.
- Disaster waivers. Tampa's post-hurricane guide says storm-related garage door replacement still needs a Residential Building Trade permit, but the fee is waived while the Mayor's emergency powers are in effect.
Ask your contractor whether the permit fee is included in the quote, and look up your city or county fee schedule online. Florida law requires each local enforcement agency to post each type of permit application, its required attachments, and its procedures for processing applications on its website.
Can you use a private provider for plan review and inspections?
Yes. Section 553.791, Florida Statutes, lets the fee owner of a building, or the owner's contractor with the owner's explicit written authorization, choose a private provider for plan review, inspections, or both, "notwithstanding any other law or local government ordinance or local policy." A copy of the owner's written authorization must go to the local building official.
Who qualifies as a private provider
A private provider is a person licensed as a building code administrator, an engineer or an architect. For inspections of residential additions and alterations of 1,000 square feet or less, the term also includes a person holding a standard inspector certificate under part XII of chapter 468. A private provider may not inspect a building that the provider or its firm designed or built.
Window and door replacements are specifically covered
The statute defines a "single-trade inspection" or "single-trade plans review" to include inspections or plan reviews of door or window replacements, along with items such as reroofing with no structural alteration and HVAC replacements. Private providers may perform single-trade inspections within the disciplines covered by their license.
What the local government must do
- Keep an electronic registration system for private providers, with no administrative fee for registering.
- Reduce the permit fee by the cost savings it realizes, and not charge plan review or inspection fees for services the provider performs. For commercial projects, the reduction must be at least 25 percent of the plan review or inspection portion, or at least 50 percent if the provider does all plan review and inspections.
- Not charge punitive administrative fees or require extra forms beyond those required at registration (except a required written notice).
- Give equal access to permitting and inspection documents to the provider, owner and contractor.
The local building official may still audit the private provider's work. A private provider can speed things up, especially after storms when inspection queues grow, but it adds a separate contract and cost. For a single house, compare the provider's fee against the reduction in the permit fee and the time saved.
What inspections happen on a window, door or shutter permit?
Inspection names and counts vary by county and city, so check your permit card. What every inspector is checking is that the installed product matches its approval and the permit. Here is what the code requires and what usually happens.
What the inspector looks for
- Labels. FBC Building 1709.5.1 requires exterior windows and doors to carry a permanent label, marking or etching traceable to the manufacturer and product, plus a permanent or temporary supplemental label showing the manufacturer, model or series, positive and negative design pressure rating, maximum size tested, impact rating if applicable, the Florida or Miami-Dade product approval number, test standards and the approving entity. The temporary label must stay on the window or door until the building official's final approval. Do not peel it off until the final inspection passes.
- Shutter labels. FBC 1709.9 requires a permanent label on every impact-resistant covering showing the approval holder, the approval methods, test standards and the Florida approval or Miami-Dade NOA number. On accordion shutters, the label goes at the bottom of the locking bar or center mate facing outside. On roll-up shutters, it goes at the bottom of the hood or the bottom slat facing outside.
- Installation instructions on site. FBC 1709.9.4 says installation instructions for impact-resistant coverings must be available to inspectors on the job site.
- Anchors, spacing and bucks. The inspector compares fastener type, embedment, edge distance and spacing against the approval drawings. For threshold buildings, Miami-Dade requires a certified Special Inspector to inspect the window and door installation, specifically the buck and fasteners.
- Emergency escape openings. Bedroom windows that serve as emergency escape openings must still work. Miami-Dade's security bar checklist requires a net clear opening of at least 5.7 square feet (5 square feet at grade floor), at least 24 inches high and 20 inches wide, operable from inside without keys or tools, with a sill no higher than 44 inches above the floor.
Typical inspection sequence
- In-progress inspection. Many jurisdictions want to see the buck (the wood or concrete frame the window attaches to) and the fasteners before they are covered by trim, stucco or caulk. If the inspector cannot see the anchors at final, you may be asked to uncover them.
- Final inspection. The inspector checks labels, operation, egress, sealing and that the products and locations match the permit.
Ask your building department whether it requires an in-progress inspection for your permit type. Some departments accept photos or a contractor's affidavit for certain stages; others do not. Florida law requires local agencies to accept inspection requests electronically, such as by email, website form or app, and Orlando lets you schedule, reschedule or cancel inspections online, by text or by phone.
What happens at the end
When the final passes, the permit is "closed" or "finaled." Keep a copy of the permit, the final inspection result and the product approval documents with your house records. Your wind mitigation inspector, insurer and a future buyer will want them.
Permit expiration, open permits and closing old permits
An open permit can cause trouble at resale, so Florida law has several rules to deal with them.
- Expiration. Under s. 553.79, a building permit issued for a single-family dwelling expires one year after issuance, or on the effective date of the next edition of the Florida Building Code, whichever is later. A local government may extend a permit. It may send a written expiration notice at least 30 days before expiration to the owner and the contractor listed on the permit.
- Closing a permit yourself. Section 553.79(16) lets a property owner close a permit, whether or not the owner is listed on the application. The owner can keep the original contractor or hire a different licensed contractor to finish the work and get the inspections. A replacement contractor is not liable for defects in the original contractor's work, only for its own. The owner may also act as owner-builder under s. 489.103(7).
- Expired but substantially done. If an expired permit's requirements are substantially complete, as the local agency determines, the permit may be closed without a new permit, and the remaining work can be done under the code in effect when the original application was received.
- The six-year rule. A local enforcement agency may close a permit six years after issuance even without a final inspection, if it finds no apparent safety hazards.
- Buyers are protected from prior owners' open permits. Section 553.79(17)(a) says a local agency may not deny a permit to, issue a notice of violation to, or fine an arm's-length purchaser solely because a previous owner's permit was not closed. The agency keeps its remedies against the prior owner and contractor.
Watch the 2026 code change
The 9th Edition (2026) Florida Building Code takes effect December 31, 2026, according to the Department of Business and Professional Regulation's 2026 product approval presentation. Miami-Dade has said it will grant extensions for permit issuance on expired applications filed before December 30, 2026 that meet its criteria; expired process numbers that do not meet them will need a new process number, new upfront fees and plans that conform to the 2026 code. If your window project is in plan review now, ask whether it will be reviewed under the 2023 or 2026 code and whether your chosen products have approvals for the new edition. Florida product approvals for the 2026 code began on July 1, 2026, and manufacturers update approvals by self-affirmation, revision or new application.
What happens if you install impact windows or shutters without a permit?
It may seem like a way to save time, but the downsides are real and often show up years later.
- Double fees and uncovering work. Miami-Dade says permits can still be issued for existing work done without one, using the same process as new work, but some work may need to be uncovered so inspectors can verify it, and the applicant pays an additional fee of 100 percent of the usual permit fees.
- Insurance problems. Without a permit, you may have trouble proving to a wind mitigation inspector that your products are approved. The OIR-B1-1802 form classifies openings with protection that "appear to be A or B but are not verified" as N, the same factor class as ordinary coverings. That can cost you the opening protection credit.
- Resale and closing delays. Buyers' inspectors and title companies often check permit history. Unpermitted windows can lead to repair requests, price cuts or demands to permit the work before closing.
- Grant eligibility. My Safe Florida Home requires grant-funded work to have all required permits and inspections. Unpermitted work does not qualify.
- Safety. The biggest risk is a window that is approved but not installed the way it was tested. Missed anchors or the wrong fasteners can let a window blow in during a storm, and once an opening fails, wind pressure builds inside the house and pushes up on the roof and out on the walls, according to IBHS.
- Enforcement on unlicensed work. If an unlicensed person does the work, they face penalties under chapter 489, and during a declared state of emergency unlicensed contracting is a third-degree felony under s. 489.127.
If you bought a house with windows that may not have been permitted, see replacing windows in an existing Florida home for how to check and what your options are.
How do you look up past permits on your house?
A permit history search should be part of buying a house, planning a wind mitigation inspection, or checking a contractor's past work.
- Find who issues permits for your address. If you live inside a city, the city usually issues permits. In unincorporated areas, the county does. Some cities send certain reviews to the county; Miami-Dade, for example, lists permits within municipalities that need county approvals from agencies such as DERM, Water and Sewer, Impact Fees and Fire Rescue.
- Use the online lookup. Florida law requires local agencies to post and update the status of every received application on their website until the permit is issued. Orlando's project lookup tool searches by permit number, address, project name or parcel ID. Orlando also offers services for title searches, renewing expired permits, extending permits and closing or withdrawing open permits.
- Look for the right permit categories. In Miami-Dade, window and glass door work appears under categories 82 and 83, exterior doors under 104, removable panels under 101 and permanent shutters under 29.
- Check the final status. An issued permit is not a finished permit. Look for a passed final inspection. If the permit is open or expired, see the section above on closing permits.
- Ask for the approval documents. The permit file may include the NOA or Florida approval numbers and a window schedule. Save copies; your wind mitigation inspector can use them.
Then cross-check the product approval numbers on the Florida Building Commission's product approval search or Miami-Dade's Product Control search. Our step-by-step guides: Florida product approval lookup and Miami-Dade NOA lookup.
Permits after a hurricane: what changes?
After a storm, demand for window, door and shutter work spikes, and so do scams. Permit rules mostly stay the same, with a few local exceptions.
- Waivers only after emergency orders. Tampa's Post-Hurricane Permitting Guide (updated April 2026) says its permit waivers apply only after a declared disaster and only after the Mayor exercises emergency powers under City Code section 2-403. The city says posting the guide does not mean permits or fees are currently waived, and directs questions to (813) 274-3100, option 1.
- Doors and garage doors in Tampa. Under those emergency powers, Tampa waives permits for size-for-size front or rear exterior door replacement, but a permit is always required to replace a garage door or to relocate, close or resize a door opening. The garage door permit fee is waived while emergency powers are in effect.
- Flood zones. If the property is in a Special Flood Hazard Area, Tampa requires a Substantial Improvement Determination form after a declared disaster, even when the repair itself does not need a permit.
- Licensing still applies. Unlicensed contracting during a declared state of emergency is a felony. Tampa's guide includes a DBPR warning against unlicensed contractors.
- Roof rules are separate. Florida's storm-solicitation and roof contract cancellation rules in s. 489.147 are written for roofing contracts. They do not expressly cover window or shutter contracts.
If a door-to-door salesperson offers to "skip the permit" after a storm, that is a warning sign. See hurricane window scams and storm chasers.
City and county notes: Miami, Broward, Tampa, Orlando and Jacksonville
| Area | Who issues permits | Notable local rules from official sources |
|---|---|---|
| Miami-Dade County | County (unincorporated) or your city | Detailed checklists by product; NOA or Florida approval required; HOA approval required before permits for permanent (accordion-type) shutters; contractors can get accordion shutter and storm panel permits through E-Permitting; after-the-fact permits carry an extra 100 percent fee; threshold-building requirements for high-rises; High-Velocity Hurricane Zone (HVHZ) rules |
| Broward County | County or your city | Also in the HVHZ, so HVHZ testing (TAS 201, 202, 203) and product rules apply. Check your city's building department for forms; we could not load Broward's county building page for this guide. |
| Tampa | City of Tampa Construction Services | Shutters and awnings are a residential permit category; some projects qualify for "Fast Pass-Same Day"; condos need a commercial permit; post-hurricane waivers only under the Mayor's emergency powers |
| Orlando | City of Orlando Permitting Services | Online project lookup; recorded Notice of Commencement needed for inspections when the contract price exceeds $5,000; online request process for the 2026 $7,500 exemption, reviewed within five business days |
| Jacksonville | City of Jacksonville Building Inspection Division | Homeowner permits require the owner to appear in person at 214 N. Hogan St., Room 280; recorded Notice of Commencement before inspections; threshold buildings need a special inspector |
In the HVHZ (Miami-Dade and Broward), the code is stricter: the whole building envelope must meet impact criteria or be protected, and HVHZ windows must comply with TAS 202 and glass rules under ASTM E1300 or section 2404. See HVHZ requirements for Miami-Dade and Broward. For the statewide picture, see the Florida guide and the hurricane shutters and impact windows hub.
How Texas handles permits for impact windows and shutters
Texas homeowners deal with two separate systems: city or county building permits, and, on the coast, the Texas Department of Insurance (TDI) windstorm inspection program that decides whether a property can be insured by the Texas Windstorm Insurance Association (TWIA).
City permits in Houston, Dallas, San Antonio and Austin
Local building permits follow each city's adopted code and rules. Inland cities such as Dallas, San Antonio and Austin are outside TDI's windstorm program, so a city permit is the main requirement. Check your city's building department for its window and door rules.
TDI windstorm certification on the coast
- Where it applies. TDI's program covers the designated catastrophe areas: Aransas, Brazoria, Calhoun, Cameron, Chambers, Galveston, Jefferson, Kenedy, Kleberg, Matagorda, Nueces, Refugio, San Patricio and Willacy counties, plus parts of Harris County east of State Highway 146 inside La Porte, Morgan's Point, Pasadena, Seabrook and Shoreacres. Most of Houston is not in the program.
- Notice before work. Texas Insurance Code 2210.2515(b) requires written notice to TDI on its form before work starts on a structure for which TWIA coverage is sought. TDI says to file Form WPI-1, Application for Certificate of Compliance.
- Which code. Starting April 1, 2026, WPI-1 applications must be certified to the 2024 International Residential Code or the 2024 International Building Code. TDI says most designated catastrophe areas are now inside the windborne debris region under those codes.
- Inspections during construction. TDI inspectors do not charge a fee and try to inspect within 48 hours of the requested date, excluding weekends and holidays. They inspect during construction. A Texas-licensed professional engineer may inspect after completion, which TDI says can be more invasive and more expensive.
- The certificate. TDI issues a WPI-8 Certificate of Compliance for new and ongoing work, or a WPI-8-E for completed work after a sealed post-construction inspection report. TWIA lists windows, entry doors and garage doors among improvements that need a certificate.
- What does not need an inspection. TDI lists replacement of glass in windows or doors, decorative shutters and screen doors among projects that do not need a windstorm inspection.
- Payment. TDI advises not making final payment until the contractor finishes all work and TDI issues the WPI-8.
See Texas TWIA windstorm certification for windows and the Texas guide.
How to choose a provider
- Confirm who issues permits for your address (city or county) and find its window, door and shutter checklist online.
- Check HOA or condo rules and submit your hurricane protection application; in Miami-Dade, get HOA approval before permitting permanent shutters.
- Get written quotes from licensed contractors and confirm each license on the DBPR site.
- Ask each contractor which product approval (FL number or NOA) they will use for every opening, and verify it online.
- Make sure the quote includes a window schedule with required and rated design pressures for each opening.
- Confirm who pulls the permit and whether the permit fee is included in the price.
- If you consider owner-builder, read the s. 489.103(7) disclosure statement and confirm you will supervise all work yourself.
- Do not assume the $7,500 exemption applies; ask the building department in writing.
- For buildings over three stories or 50 feet, plan for a threshold inspection plan and a certified Special Inspector.
- Record a Notice of Commencement if your jurisdiction requires it before inspections.
- Keep the installation instructions on site and leave temporary labels on until final inspection.
- Schedule the in-progress (buck and fastener) inspection before anchors are covered, if your department requires it.
- After the final passes, save the permit, final inspection record and product approvals for your wind mitigation inspection.
- Search your property's permit history for open or expired permits before selling or buying.
- In coastal Texas, file WPI-1 with TDI before work and hold final payment until the WPI-8 is issued.
Related hurricane shutters and impact windows guides
- Florida Product Approval (FL Number): How Do You Search floridabuilding.org and Verify Windows, Doors and Shutters?
- How Do You Look Up a Miami-Dade NOA (Notice of Acceptance) and Read It?
- Replacing Windows in an Existing Florida Home: Does the New Window Have to Be Impact Rated?
- Design Pressure (DP) Ratings Explained: What Do DP50 and +60/-70 psf Mean for Your Windows?
- Can a Florida HOA Deny Hurricane Shutters or Impact Windows? What s. 720.3035(6) Requires
- Who Can Install Impact Windows and Hurricane Shutters in Florida? Contractor Licensing Under Chapter 489
- How Do Condo Buildings Replace All Their Windows? Engineering, SIRS, Votes, Access and Costs in Florida and Texas
- Do You Need a Texas Windstorm Certificate (WPI-8) for New Windows, Doors or Shutters?
Hurricane shutters and impact windows by state and city
Questions people ask
Do I need a permit for hurricane shutters in Florida?
Yes, in nearly all cases. Shutters and storm panels are impact protective systems that must have a Florida product approval or Miami-Dade NOA and be installed according to that approval. Miami-Dade, for example, has a specific shutter and storm panel checklist (category 101 for removable panels, 29 for permanent shutters) requiring the square footage, a drawing of protected openings with the mean roof height, and the NOA for each product. Some local exemptions or post-storm waivers exist, but confirm with your building department before skipping a permit.
Do I need a permit to replace one window with an impact window?
Generally yes. Window replacement must meet the wind-load chapter of the Florida Building Code, and building departments require a permit and inspection. For a same-size replacement on a house, FBC 107.1.1 says you usually do not need an engineer's sealed drawings if the window meets current design pressures, is installed per the manufacturer's instructions for your wind zone, and you submit the instructions with the application.
Can a homeowner pull a permit for impact windows?
Yes, as an owner-builder under s. 489.103(7), if it is your own one- or two-family home for your own use, not for sale or lease, and you directly supervise all work not done by licensed contractors. You must sign the application in person and acknowledge a disclosure statement. Selling within one year of completion creates a presumption the work was for sale. Hiring an unlicensed installer under your owner-builder permit is not allowed.
What documents do I need for a window permit?
Expect a permit application, the square footage of the work, a drawing or elevation showing which openings are being replaced, the required positive and negative design pressures for each opening, and the Florida product approval or Miami-Dade NOA for each product with the chosen glass and anchoring options marked. Many jurisdictions also need a recorded Notice of Commencement before inspections, and owner-builders sign an extra form.
How long does a window permit take in Miami-Dade?
Miami-Dade does not publish a single turnaround time that we could verify. State law in s. 553.792 sets maximum review periods once an application is complete, such as 30 business days for many residential permits on homes under 7,500 square feet, and requires notice of missing items within 5 business days. Complete packages move fastest. For threshold buildings, extra engineering and special inspection documents add time.
What happens if my contractor installed windows without a permit?
You can usually permit the work after the fact, but you may pay more and may have to uncover anchors for inspection. Miami-Dade adds a fee equal to 100 percent of the usual permit fees for work done without a permit. Unpermitted openings can also lose wind mitigation credit if the inspector cannot verify the products, and can cause problems at resale.
Can I use a private provider for window inspections?
Yes. Section 553.791 lets the owner, or the contractor with the owner's written authorization, hire a private provider for plan review, inspections or both. Door and window replacements are listed as single-trade inspections. The local government must reduce the permit fee by its cost savings and may not charge inspection fees for work the provider performs.
Does my HOA have to approve shutters before I get a permit?
Florida law requires HOAs to adopt hurricane protection specifications and approve applications that meet them. Since July 1, 2026, an HOA may not require a building permit before it reviews your application. Separately, Miami-Dade County Code requires HOA approval before the county issues a permit for permanent storm shutters, so in Miami-Dade, get the HOA approval first.
Does the 2026 $7,500 permit exemption cover impact windows?
Not clearly. The exemption in s. 553.79(1)(g) applies to single-family work valued under $7,500 but excludes flood hazard areas and structural, electrical, plumbing, mechanical and gas work. Windows and doors must be designed for wind loads, and many building officials treat that as structural. Most impact window jobs also exceed $7,500. Ask your building department in writing before relying on it.
How do I find old permits on my house?
Use your city or county's online permit lookup, searching by address or parcel number. Look for window, door and shutter categories and confirm each permit shows a passed final inspection. Open or expired permits can be closed by the current owner under s. 553.79(16), and a buyer cannot be penalized solely for a prior owner's open permit.
Will the 2026 Florida Building Code affect my window permit?
Possibly. The 9th Edition (2026) takes effect December 31, 2026. Permits are reviewed under the code in effect when the application is received, and Miami-Dade has said expired process numbers that do not meet its extension criteria will need plans conforming to the 2026 code. Ask your contractor whether the products have approvals listed for the code edition your permit will use.
Do Texas homeowners need a TDI inspection for impact windows?
Only if the property is in TDI's designated catastrophe area and the owner wants TWIA eligibility. Then the owner or builder files Form WPI-1 before work starts, a TDI inspector or appointed engineer inspects during installation, and TDI issues a WPI-8 certificate. Replacing only the glass does not need a windstorm inspection. City building permits are a separate requirement.
Sources
- Miami-Dade County: Windows, Shutters, Doors and Security Bars permit checklists
- Miami-Dade County: Homeowners general permit information
- Miami-Dade County Building Department home
- Florida Building Code, Building, 8th Edition (2023), Chapter 1 (section 107.1.1)
- Florida Building Code, Building, 8th Edition (2023), Chapter 17 (labels, section 1709)
- Florida Building Code, Existing Building, 2023, Chapter 7
- Florida Statutes s. 553.79, Permits; applications; issuance; inspections
- Florida Statutes s. 553.791, Alternative plans review and inspection
- Florida Statutes s. 553.792, Building permit application to local government
- Florida Statutes s. 553.80, Enforcement
- Florida Statutes s. 553.842, Product evaluation and approval
- Florida Statutes s. 489.103, Exemptions (owner-builder)
- Florida Statutes s. 489.127, Prohibitions; penalties
- Florida Administrative Code Rule 61G4-15.015, Specialty Structure Contractor
- Florida Statutes s. 720.3035, HOA architectural control and hurricane protection
- Florida Statutes s. 718.113, Condominium hurricane protection
- Laws of Florida ch. 2026-63 (CS/CS/HB 803)
- Florida Statutes s. 215.5586, My Safe Florida Home Program
- City of Orlando: Apply for a Residential Building Permit Exemption
- City of Orlando: Permits and Inspections
- City of Tampa: Post-Hurricane Permitting Guide (April 2026)
- City of Tampa: Shutters and Awnings residential permits
- City of Tampa: Residential permits
- City of Jacksonville: Residential permits
- City of Jacksonville: Home owner permitting page
- Florida DBPR: 2026 FBC Update, State Product Approval and the 9th Edition (June 30, 2026)
- Florida OIR Form OIR-B1-1802, Uniform Mitigation Verification Inspection Form (Rev. 04/26)
- Citizens Property Insurance: Your Wind Inspection
- IBHS FORTIFIED: Before the Storm, a homeowner's guide to hurricane readiness
- Texas Department of Insurance: Windstorm inspection process
- Texas Department of Insurance: Adopted building codes
- Texas Department of Insurance: General windstorm questions
- Texas Department of Insurance: Do you need a windstorm inspection?
- Texas Department of Insurance: Making repairs after a storm
- TWIA: Windstorm certification
- Texas Insurance Code Chapter 2210
- Fla. Admin. Code r. 61G4-15.100, Certified Specialty Contractors
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


