New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Hurricane shutters and impact windows

How Do You Look Up a Miami-Dade NOA (Notice of Acceptance) and Read It?

A step-by-step guide to finding a Miami-Dade Notice of Acceptance for a window, door, shutter or garage door, reading its approval dates, missile rating, limitations, design pressure tables and anchor details, and using it for permits and insurance in Florida and Texas.

A Miami-Dade NOA (Notice of Acceptance) is the county's approval document for a building-envelope product such as an impact window, door, shutter or garage door. Search it free on Miami-Dade's Product Control Search by file number (format like 21-0114.06) or by manufacturer, category, impact rating and design pressure. Page 1 shows the description, missile rating, limitations, labeling, NOA number, approval date and expiration date. The approval drawings hold the design pressure tables and anchor schedules.

Key facts

  • NOAs are issued by the Product Control Section of Miami-Dade's Department of Regulatory and Economic Resources (RER), 11805 SW 26 St., Room 208, Miami; phone 786-315-2590.
  • The Product Control Section reviews about 1,250 product approval applications and conducts more than 850 quality assurance audits a year.
  • A first-time NOA costs the manufacturer $4,000 plus a 7.5% surcharge and is valid for five years; renewals and revisions cost $1,500 each, and a revision does not extend the expiration date.
  • Miami-Dade's search can filter by classification (HVHZ or non-HVHZ), applicant, category, subcategory, material, impact rating and minimum positive and negative design pressure.
  • Miami-Dade's status key says a 'Superseded' NOA can still be used until its expiration date, while 'File Closed' and 'Expired' NOAs are no longer valid or active.
  • NOAs state that a copy of the entire NOA must be available at the job site for the building official.
  • Miami-Dade accepts Florida Building Commission product approvals as well as NOAs for window, door and garage door permits.
  • Florida's wind mitigation form requires Level A and B opening protection products to be listed in the Florida or Miami-Dade product approval system.

What is a Miami-Dade NOA?

An NOA, or Notice of Acceptance, is the approval document Miami-Dade County issues when a manufacturer proves a building-envelope product meets the Florida Building Code. The Product Control Section of the county's Department of Regulatory and Economic Resources (RER) handles windows, exterior glazing, wall cladding, roofing, exterior doors, skylights, glass block, siding and shutters. Testing labs used for approvals must also be Miami-Dade certified, and the section audits manufacturers and labs for quality assurance.

Most NOAs for windows, doors and shutters say the product "has been designed to comply with the Florida Building Code, including the High Velocity Hurricane Zone." That HVHZ wording is why NOAs matter so much in Miami-Dade and Broward, the two counties in the High-Velocity Hurricane Zone. But NOAs are also used elsewhere: the scope language on each NOA says it may be used "in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction."

You need the NOA for three things: the building permit (the county asks for the current NOA of each product), the final inspection (inspectors compare the installed product with the approval), and your insurance wind mitigation inspection (inspectors need proof the product is approved).

How to search for a Miami-Dade NOA, step by step

The search is free and needs no account. As of November 2026 it is at miamidade.gov/building/pc-search_app.asp (linked from the county's Product Approval page).

  1. Find a number first, if you can. Look at the product label, the installer's paperwork, your permit or the quote. NOA numbers look like 21-0114.06: two digits, a hyphen, four digits, a period and two digits.
  2. Basic Search. Type the file number into "Search by File" and click Go. This is the fastest way to pull up one approval.
  3. Advanced Search if you have no number. Narrow by any of these fields: File Classification ("High velocity hurricane zone" or "Non-High velocity hurricane zone"), Applicant (the manufacturer), Category (for example Windows, Doors, Shutters, Panels), Subcategory (for example Casement, Double Hung - Single Hung, Horizontal Slider, Sliding, Swinging, Sectional, Rollup, Accordion, Bahama, Colonial, Storm Panels, Skylights - Units, Glass Block), Material (Aluminum, Vinyl - PVC, Steel, Wood, Polycarbonate and others) and Impact Rating (Large and Small Missile Impact, Large Missile Impact, Small Missile Impact, Large Missile and Level E).
  4. Filter by design pressure. Tick the boxes for Maximum Design Pressure (+) and (-) and enter the pressures your openings need. Results will exclude products rated below them.
  5. Open the result. Each result shows the file number, status and a link to the NOA PDF. Read the status before anything else (next section).
  6. Save the whole PDF. The NOA includes page 1, evidence pages (E-1, E-2 and so on) and refers to separate approval drawings. Keep all of it with your house records.

The search page was built years ago and can be finicky. If a search errors out, go back, click Reset and try fewer fields. If you still cannot find a product, call the Product Control Section at 786-315-2590.

What the NOA status means

Miami-Dade publishes a key to the status codes shown in search results. In plain terms:

StatusWhat it meansCan it be used?
File PendingInitial review before technical reviewNot yet
File Assigned for Technical Review / WorkingIn the queue or under review by an examinerNot yet
Additional Info. Requested / Assigned for Additional ReviewExaminer needs more from the applicantNot yet
File Complete / NOPA to Approve IssuedReview done; Notice of Proposed Action issued; approval scheduledNot until approved
File ApprovedThe NOA is validYes
SupersededThe NOA was revised and a newer one existsYes, until its expiration date
NOPA to Remove IssuedThe NOA is being removedAsk the building department
File ClosedNo longer valid: loss of quality assurance, product not in compliance, or abandoned or discontinuedNo
ExpiredNo longer activeNo, for new permits

A Superseded NOA is common and not a red flag. Manufacturers revise NOAs to add sizes, glass options or code updates. The newer NOA will say which one it revises (for example, "This NOA revises NOA # 20-0519.01").

How to read an NOA: page 1, line by line

NOA page 1 follows a standard layout. Using real NOAs posted on Miami-Dade's site, here is what each part tells you.

PartWhat it saysWhy it matters
Header and applicantRER Product Control Section and the manufacturer's name and addressConfirms who holds the approval
ScopeUse in Miami-Dade and other areas where the AHJ allows; the county may retest and may revokeOutside Miami-Dade, the local building official decides
HVHZ statement"Designed to comply with the Florida Building Code, including the High Velocity Hurricane Zone"Required for Miami-Dade and Broward
DescriptionSeries name and product type, often with a size limit and DP, for example a steel sectional garage door "up to 16ft.-2in." with "(DP +27.0, -30.0 PSF)"Must match what you are buying
Approval documentDrawing number, sheets, revision date and the engineer who signed and sealed themThe drawings hold the DP tables, glass and anchor details
Missile impact ratingFor example "Large and Small Missile Impact Resistant"Large missile is needed up to 30 ft in the HVHZ
LimitationsConditions of use (see below)Often where problems hide
LabelingWhat the permanent label must showLets you and the inspector verify the installed unit
Renewal, termination, advertisement, inspectionStandard terms; a copy of the entire NOA must be available at the job siteAsk your installer for the full NOA
FooterNOA number, approval date and expiration dateCheck the date against your permit date

Limitations: read these carefully

Real examples from NOAs posted by the county show the kinds of limits that change what you can install:

  • "Lower DP ratings shall apply for entire assembly, when doors are mulled w/ Sidelites." If your French door is rated higher than its sidelite, the whole unit takes the lower number.
  • "Door w/ transom is limited to max. 25-1/2" h Transom."
  • "Glass lite wider than 36" shall be supported with approved setting blocks or clamps."
  • "Garage doors with flood vents are not rated for Large Missile Impact Resistance." A flood-vented garage door under that NOA cannot count as impact protection.
  • "This door has not been tested for air infiltration."
  • "Approved current... Doors and Windows are under separate NOA(s). Lower design pressure will control the entire system." Common on window wall and storefront systems.
  • Requirements for specific hardware, such as two manually operated flush bolts on the inactive leaf of a double door.

Evidence pages

Pages E-1, E-2 and so on list the evidence: test reports (for example air infiltration, static pressure and water resistance per TAS 202, large missile impact per TAS 201, cyclic pressure per TAS 203, and forced entry), anchor calculations, glazing compliance with ASTM E1300, quality assurance, material certifications such as the NOAs for the laminated glass interlayers used, and the engineer's statement of code conformance.

Reading the design pressure tables and anchor schedules

The approval drawings, not page 1, contain the numbers your permit depends on. Miami-Dade's permit checklist asks for the required positive and negative design pressures of each window or door, "typically located on your product approval documents under the Design and Pressures Rating (psf)," and for the glass type and options chosen from the approval's glass schedule.

Design pressure (DP) tables

  • Tables list unit width and height (or panel size) against glass type and give a positive (+) and negative (-) rating in pounds per square foot (psf).
  • Positive pressure pushes in on the window; negative pressure (suction) pulls out. Corners of a building see higher suction, so a corner window often needs a higher negative rating than one mid-wall.
  • Find your size and glass combination. The rating must meet or exceed the pressure your engineer or the code tables assign to that opening. Bigger units and thinner glass usually mean lower ratings.
  • Mulled units (two or more units joined by a mullion) take the lowest rating of the parts, including the mullion, which usually has its own NOA.

Anchor schedules and installation details

  • Sheets show how the unit attaches to concrete block, poured concrete, wood frame or a wood buck: the anchor type, diameter, minimum embedment, edge distance and maximum spacing.
  • Some ratings require more anchors or a specific substrate. A unit anchored into a 1x wood buck may carry a different rating than the same unit anchored directly into concrete.
  • Shutter approvals show the separation needed between the shutter and the glass. HVHZ rules require a shutter to resist impact without touching the glass it protects.

Can a contractor install it differently than the NOA shows? Not without separate approval. FBC 1709.9.4 requires shutters to be installed per the manufacturer's instructions and the product approval, and each NOA says failure to comply with any section of the NOA is cause for termination. Alternate sizes or details need engineering analysis that the building official accepts. For shutters and windows, the code also allows certain alternate sizes by accepted engineering analysis (FBC 1709.5). If an installer proposes something not on the drawings, ask for signed and sealed engineering and confirm the building department will accept it before work starts.

More on reading the numbers: design pressure ratings explained and missile impact testing standards.

How long is an NOA valid, and what if it expires after installation?

A new NOA is valid for five years, and a renewal adds another five years if the code has not changed in a way that hurts the product's performance. A revision (for example, adding a size) does not extend the expiration date. The expiration date is printed in the footer of every page.

For new work, the NOA should be current when the permit is applied for and the work is inspected. Miami-Dade's permit checklists ask for "the current Notice of Acceptance (NOA)" for each product.

For products already installed, an NOA that expires later does not, on its own, make a permitted installation illegal. The Florida Building Code says the legal occupancy of a structure existing when the code is adopted may continue without change unless the code specifically provides otherwise (Section 102.6). What we could not confirm in a primary source is a written county or state rule saying exactly how an expired NOA is treated for an existing installation in every situation, so keep these records:

  • The NOA that was current when the work was permitted
  • The permit and the passed final inspection
  • Photos of the labels

That package is your best evidence for a building official, a buyer's inspector or a wind mitigation inspector. If a question comes up, ask the building department that issued the permit.

Finding the NOA number on your window, door or shutter

Code-required labels are the easiest route. Under FBC 1709.5.1, windows and doors must carry a permanent label, marking or etching traceable to the manufacturer and product, and a temporary label (which stays on until final approval) showing the manufacturer, model or series, positive and negative design pressure, maximum size tested, impact rating, Florida or Miami-Dade approval number and test standards. NOAs for windows typically require a permanent label with the manufacturer's name or logo, city, state, series and the statement "Miami-Dade County Product Control Approved."

  • Windows and sliders: look on the frame inside the sash track, on the head or sill, or on the side jamb. Laminated impact glass is often etched in a corner.
  • Accordion shutters: the bottom of the locking bar or center mate, facing outside (FBC 1709.9.3).
  • Roll-down shutters: the bottom of the hood or the bottom slat, facing outside.
  • Panels: FBC 1709.9 requires a permanent label on every impact-resistant covering, showing the approval holder, approval methods, test standards and the Florida or Miami-Dade number.
  • Garage doors: NOAs for garage doors put the label on the door's side track, bottom angle or inner surface of a panel, and it must show the design pressures, impact rating, drawing number and NOA number.

No label? Check your permit file (the approval number is usually on the permit drawings), ask the installer, or search the Product Control database by manufacturer and product type and compare the drawings with what is installed.

NOA vs. Florida Product Approval: what's the difference?

Miami-Dade NOAFlorida Product Approval
Issued byMiami-Dade RER Product Control SectionFlorida Building Commission
Number formatLike 21-0114.06Starts with FL followed by digits
Where searchedmiamidade.gov Product Control Searchfloridabuilding.org Product Approval
HVHZ useMost window, door and shutter NOAs cover HVHZOnly if the approval covers HVHZ use
TermFive years, renewable553.842 calls for long-term approvals that stay valid until the underlying code changes, the product changes, or the approval is revoked
Accepted in Miami-Dade permitsYesYes, per the county

Florida law names the Miami-Dade Product Control Division as one of the evaluation entities the Building Commission must approve (553.842), so an NOA often supports a Florida approval for the same product. Under 553.842, a statewide approval keeps local governments from demanding more testing as long as the product is used consistent with its approval. Details: Florida product approval lookup.

Using an NOA for insurance and in Texas

Florida wind mitigation form

Florida's Uniform Mitigation Verification Inspection Form (OIR-B1-1802, Rev. 04/26) gives Level A or B opening protection only to products "listed as wind borne debris protection devices in the product approval system of the State of Florida or Miami-Dade County." Products that look rated but are not documented are marked N. Citizens Property Insurance recommends giving the inspector NOA letters for mitigation products so features that are not clearly marked still earn discounts. Citizens also says updated features may require documentation such as NOA letters and possibly a new inspection. See the wind mitigation form and opening protection.

Outside Miami-Dade and Broward

An NOA is not required outside the HVHZ, but it is accepted wherever the local building official allows. Many Palm Beach, Tampa and Orlando permits use NOAs because the same product carries one.

Texas

TDI tells coastal homeowners to use opening protection tested to ASTM E1886 and E1996 "and designated by a recognized product approval." The Florida Building Code lists "TDI Product Evaluation" and "Miami-Dade NOA" side by side as approval methods for shutters. TDI publishes its own product evaluations and links third-party evaluation reports on its Windstorm System. We could not confirm on a TDI page whether a Miami-Dade NOA alone is accepted as evidence for a WPI-8 windstorm certificate. Before you buy, ask your TDI-appointed inspector or engineer, or email TDI's engineering staff at engineering@tdi.texas.gov. See TWIA windstorm certification for windows.

How to choose a provider

  • Get the NOA or Florida approval number from the quote before you sign.
  • Look it up yourself on Miami-Dade's Product Control Search and confirm the status is File Approved or Superseded.
  • Check the expiration date against your planned permit date.
  • Confirm the HVHZ statement if you are in Miami-Dade or Broward.
  • Find your unit size and glass type in the DP table and compare it with the pressure required for each opening.
  • Read every limitation, especially mulling, transoms, flood vents and hardware.
  • Compare the anchor schedule with your wall type (block, concrete, wood frame, wood buck).
  • Save the full PDF, including evidence pages, with your permit and final inspection.
  • Photograph the labels after installation, before any are painted over.
  • Give the NOA letters to your wind mitigation inspector.

Related hurricane shutters and impact windows guides

Hurricane shutters and impact windows by state and city

Questions people ask

Who issues Miami-Dade NOAs?

The Product Control Section of the Miami-Dade County Department of Regulatory and Economic Resources (RER), Board and Code Administration Division, at 11805 SW 26 Street, Room 208, Miami, FL 33175. The phone number on NOAs is 786-315-2590. The section reviews about 1,250 applications a year and also runs quality assurance audits of manufacturers, fabricators and labs.

Is an NOA needed outside Miami-Dade?

Not in most of Florida. Outside Miami-Dade and Broward, a Florida Building Commission product approval is the usual route, though an NOA is accepted where the local building official allows. In Broward, which is also in the HVHZ, products need HVHZ-level approval, and an NOA is the most common proof. In Texas, TDI uses its own product evaluations and recognized third-party reports; confirm with TDI whether a specific NOA will be accepted.

What does 'Large and Small Missile Impact Resistant' mean on an NOA?

It means the product passed both the large missile test (a 9-pound 2x4 at 50 feet per second, used for openings up to 30 feet above grade in the HVHZ) and the small missile test (2-gram steel balls at 130 feet per second, used above 30 feet). A product rated only for small missile impact cannot be used where the large missile applies, such as ground-floor openings.

Why does my NOA show two design pressure numbers?

Windows, doors and shutters are rated for positive pressure (wind pushing in) and negative pressure (suction pulling out). Both must meet the pressures required for that opening. Negative pressures are often higher near building corners and roof edges, so check both numbers. A garage door NOA, for example, may say DP +42.0, -52.0 psf.

My installer says the product is 'Miami-Dade approved.' Is that enough?

Ask for the actual NOA number and look it up. Florida law bars marketing a product as hurricane or debris protection unless it is approved, and an NOA forbids using the approval as a sales endorsement. The specific model, size, glass and anchoring must match the NOA, and the NOA must be current when your permit is issued.

Do I need the NOA for my wind mitigation inspection?

It helps a great deal. Level A or B credit requires products listed in the Florida or Miami-Dade approval system. If labels are missing or painted over, the inspector may mark the openings N (unverified), which usually earns less credit. Citizens recommends giving inspectors NOA letters from installers or manufacturers.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration