Local Guide · Residential solar installers
How Do You Calculate a Solar Payback Period? Do the Math Yourself
Solar payback is simple division once you have honest inputs. This step-by-step method shows where each number comes from, how Texas buyback plans and Florida net metering change the result, and how to test a seller's savings claim.
Solar payback period is the number of years it takes for savings to equal what you paid. The basic formula is net installed cost divided by first-year savings. Savings equal the kWh you use directly times your per-kWh price, plus exported kWh times what your utility or plan pays for them. In 2026, with no federal credit for purchased home systems, our Texas and Florida examples range from about 9 to 20 years, driven mainly by how exports are valued.
Key facts
- PVWatts models annual output per kW of panels at about 1,421 kWh in Houston, 1,506 in Dallas, 1,483 in Austin, 1,497 in San Antonio, 1,552 in Miami, 1,568 in Tampa, 1,544 in Orlando and 1,455 in Jacksonville (south-facing, 20 degree tilt, 14% losses).
- A review of nearly 2,000 field measurements (Jordan and Kurtz, NREL, 2012) found a median PV degradation rate of 0.5% per year and a mean of 0.8%.
- EIA: average residential electricity price in August 2026 was 15.91 cents per kWh in Texas, 14.99 in Florida and 18.16 nationally.
- EnergySage lists average installed prices of $2.26 per watt in Texas and $2.12 per watt in Florida as of November 2026.
- EnergySage's marketplace estimates average payback periods of 12.75 years in Texas and 10.23 years in Florida.
- The 30% federal 25D credit does not apply to home systems whose installation was completed after December 31, 2025.
- Florida Rule 25-6.065: excess credits carry forward up to 12 months, and leftover credits are paid once a year at the utility's COG-1 as-available (avoided cost) energy rate.
- Austin Energy credits all solar production at 12.89 cents per kWh (from October 2026); Texas retail choice providers set export value by contract.
- EnergySage reported home battery prices around $1,130 per kWh of storage in the first half of 2026.
The formula in one line
Simple payback (years) = net installed cost / first-year bill savings
Everything hard about solar payback hides inside those two numbers. Net cost is the price after any rebates. Bill savings depend on how much your system makes, how much of that you use yourself, and what each kWh is worth on your rate or plan.
Below we build each input step by step, then show worked examples for Houston, Austin, Miami and Tampa, a sensitivity table for rate increases, and more advanced measures (net present value, internal rate of return and levelized cost). All numbers come from named, dated sources. Anything we assume is labeled as an assumption.
Step 1: find your net installed cost
Start with the total contract price for a purchased system. Then:
- Compute price per watt. Divide the price by the system size in watts (DC). A $20,000 quote for 8 kW (8,000 W) is $2.50 per watt. Compare it to EnergySage's November 2026 averages: $2.26 per watt in Texas and $2.12 per watt in Florida. Berkeley Lab's Tracking the Sun, as summarized by Mercom in October 2026, found a 2025 national median of $3.60 per watt for host-owned residential systems ($3.00 for cash purchases), which reflects prices actually reported for installed systems.
- Subtract utility rebates you will actually receive, such as Austin Energy's $4,000 home solar rebate for eligible 2026 projects. CPS Energy says it has no current residential solar rebate.
- Do not subtract the 30% federal credit for a system finished in 2026. The IRS says 25D is not allowed for expenditures made after December 31, 2025, and an expenditure is made when installation is completed. A system finished in late 2025 that got utility permission to operate in 2026 is a gray area the IRS has not directly addressed, so keep your completion records and ask a tax professional.
- Add required extras that are not in the base price: a main panel upgrade, roof repairs needed before install, or tree removal.
Florida buyers do not pay sales tax on solar equipment (Statute 212.08(7)(hh)), so make sure a Florida quote does not add it. See our solar cost guide.
Step 2: estimate production with PVWatts
PVWatts is a free calculator from the National Laboratory of the Rockies (formerly NREL). It uses typical weather data to estimate how many kWh a system will make each month and year.
We ran PVWatts version 8 for eight cities with identical inputs so you can compare: 1 kW of standard modules, fixed roof mount, facing due south (azimuth 180), 20 degree tilt, 14% system losses.
| City | kWh per kW per year | Capacity factor | 8 kW system per year |
|---|---|---|---|
| Houston | 1,421 | 16.2% | 11,368 |
| Dallas | 1,506 | 17.2% | 12,048 |
| Austin | 1,483 | 16.9% | 11,864 |
| San Antonio | 1,497 | 17.1% | 11,976 |
| Miami | 1,552 | 17.7% | 12,416 |
| Tampa | 1,568 | 17.9% | 12,544 |
| Orlando | 1,544 | 17.6% | 12,352 |
| Jacksonville | 1,455 | 16.6% | 11,640 |
To run your own: enter your address at pvwatts.nlr.gov, set system size to the quote's DC kW, set the azimuth to your roof's direction (90 east, 180 south, 270 west), and use your roof pitch as tilt. If the roof has several faces, run each one separately and add them. Compare the result to the quote's year-one production. If the seller's number is more than about 10% higher, ask for the shading report and the software used.
Step 3: split self-used and exported kWh
Every kWh your panels make either powers your home at that moment (self-consumption) or flows out to the grid (export). The two can be worth very different amounts.
How to find your split:
- Best: download hourly or interval usage data. Texans in retail choice areas can use Smart Meter Texas. Many utilities also offer interval downloads. Line it up with PVWatts' hourly output.
- Good: if you already have solar, read your bill or meter. CPS Energy's Solar Billing Facts sheet, for example, shows how to compute self-used solar: total production minus surplus sent to the utility.
- Rough: if you have no interval data, pick a self-use share as an explicit assumption and test a low and a high value. Homes that are empty during the day use less of their solar on the spot; homes with daytime pool pumps, home offices or EV charging use more.
Where exports are credited at the full retail rate within your annual usage, as with Florida investor-owned utilities under Rule 25-6.065, the split matters less. In Texas retail choice areas, it can decide whether solar is worth it.
Step 4: put a value on each kWh
Use the rules for your utility or plan.
| Where | Value of a self-used kWh | Value of an exported kWh |
|---|---|---|
| Texas retail choice (Houston, DFW) | Your plan's energy charge plus per-kWh delivery charges | Whatever your plan pays by contract (Utilities Code 39.916(j)); may be zero |
| Austin Energy | All production credited at 12.89 cents per kWh (Value of Solar); all use billed at standard rates | Same: every kWh produced earns 12.89 cents, no matter when used |
| CPS Energy | Full rate | Offsets same-month usage at full rate; leftover net excess credited at a low rate (example sheet: $0.0165 to $0.0202 per kWh) |
| Florida investor-owned utilities (FPL, Duke, TECO, FPUC) | Full rate | Credited against later usage for up to 12 months; leftover paid yearly at the COG-1 avoided cost rate |
| JEA (Jacksonville) | Full rate | Credited at JEA's fuel rate |
| OUC (Orlando), new customers since July 1, 2025 | Full rate | Community Solar Energy Rate for five years, then the Retail Levelized Fuel rate |
Use your marginal rate, not your average. EIA's average residential price (15.91 cents per kWh in Texas and 14.99 cents in Florida in August 2026) divides your whole bill, including fixed customer charges, by your kWh. Solar does not remove fixed charges. Florida's net metering rule says customers still pay the customer charge and any demand charge. So add up only the per-kWh charges on your bill (energy, fuel, delivery and per-kWh riders) for a truer value. Our examples use EIA averages for simplicity, which slightly flatters savings.
Step 5: compute savings and simple payback
First-year savings = (self-used kWh x self-use value) + (exported kWh x export value)
Then divide net cost by first-year savings. Here are worked examples. Each uses an 8 kW system, PVWatts production, EIA's August 2026 state average price, and EnergySage's November 2026 state price per watt. These are illustrations, not quotes.
| Case | Net cost | First-year savings | Simple payback |
|---|---|---|---|
| Houston, plan with no buyback, 50% self-used | $18,080 | 5,684 kWh x $0.1591 = $904 | about 20 years |
| Houston, 50% self-used, exports at 5 cents (assumed) | $18,080 | $904 + 5,684 x $0.05 = $1,189 | about 15 years |
| Houston, exports credited one-for-one | $18,080 | 11,368 x $0.1591 = $1,809 | about 10 years |
| Austin Energy, no rebate | $18,080 | 11,864 x $0.1289 = $1,529 | about 12 years |
| Austin Energy, with $4,000 rebate | $14,080 | $1,529 | about 9 years |
| Miami, FPL net metering, production under annual use | $16,960 | 12,416 x $0.1499 = $1,861 | about 9 years |
| Tampa, TECO net metering, production under annual use | $16,960 | 12,544 x $0.1499 = $1,880 | about 9 years |
Compare: EnergySage estimates average payback of 12.75 years in Texas and 10.23 years in Florida from its marketplace data. Our ranges bracket those figures.
Price sensitivity: at $3.00 per watt instead of the state average, the Houston one-for-one case rises to about 13 years and the Miami case to about 13 years. At $3.60 per watt, the Houston 5-cent buyback case passes 24 years.
Adding degradation: panels make a little less each year
Solar panels lose a small amount of output each year. Jordan and Kurtz at NREL reviewed nearly 2,000 measured degradation rates and found a median of 0.5% per year and a mean of 0.8% per year; for silicon modules the median was 0.5% and the average 0.7%. Check your panel's warranty sheet for the maker's guaranteed rate.
At 0.5% per year, an 8 kW Houston system making 11,368 kWh in year one makes about 10,810 kWh in year 11 and about 10,060 kWh in year 25. Over 25 years, total output is about 23.6 times the first year, not 25 times. That alone adds a few months to a 10 year payback.
Rate escalation: what should you assume?
Many proposals assume your electricity price will rise 3% to 5% every year. That assumption shortens payback a lot, and no one can guarantee it.
What the data show: EIA reports average residential prices for January through August of 15.18 cents per kWh in 2025 and 16.03 cents in 2026 in Texas (up about 5.6%), and 15.04 to 15.32 cents in Florida (up about 1.9%). Nationally, 17.03 to 18.19 cents (up about 6.8%). One year of change is not a forecast. Prices can also fall.
The honest approach is a sensitivity table. Here is the Houston 5-cent buyback case and the Miami net metering case with 0.5% yearly degradation and different yearly rate increases:
| Yearly rate increase | Houston payback | Houston 25-year net savings | Miami payback | Miami 25-year net savings |
|---|---|---|---|---|
| 0% | 15.8 years | about $9,900 | 9.3 years | about $26,900 |
| 2% | 13.8 years | about $17,600 | 8.6 years | about $38,900 |
| 3% | 13.1 years | about $22,400 | 8.3 years | about $46,500 |
| 5% | 11.9 years | about $34,700 | 7.8 years | about $65,700 |
Net savings are total savings minus the purchase price, not discounted. If a project only works at 5%, it is a bet on rising rates. If it works at 0% to 2%, it is a sturdier decision.
Operating costs: inverters, insurance and roof work
A full payback model includes costs after installation:
- Inverter replacement. Inverters can carry a different warranty term than panels. Get the replacement cost and warranty term in writing for your equipment. In our model, an assumed $2,000 inverter replacement in year 13 (an illustration, not a market price) pushed the Houston 5-cent case from 15.8 to 17.6 years at 0% rate growth, but did not change cases that paid back before year 13.
- Insurance. Adding the system can raise your dwelling coverage. Ask your insurer for the premium change.
- Roof replacement. If the roof will need replacing during the system's life, budget for removal and reinstall. See removal and reinstall.
- Monitoring and repairs. Ask whether monitoring or service visits carry any ongoing fee.
- Fixed utility charges. They remain, so do not count them as savings.
Beyond simple payback: NPV, IRR and LCOE
Simple payback ignores what happens after break-even and treats a dollar in year 15 the same as a dollar today. Three other measures help:
- Net present value (NPV): the value today of all future savings minus the cost, using a discount rate that reflects what your money could earn elsewhere. Positive NPV means the project beats that alternative.
- Internal rate of return (IRR): the yearly return that makes NPV zero. Compare it to other uses of the same money.
- Levelized cost of energy (LCOE): lifetime cost divided by lifetime kWh. Compare it to the per-kWh price you pay.
| Measure (25 years, 0.5% degradation) | Houston, 5-cent buyback | Houston, one-for-one | Miami, FPL net metering |
|---|---|---|---|
| IRR at 0% rate growth | 3.8% | 8.3% | 9.5% |
| IRR at 2% rate growth | 5.7% | 10.2% | 11.4% |
| NPV at 5% discount, 2% rate growth | about $1,300 | about $11,400 | about $13,400 |
| Lifetime kWh | about 267,800 | about 267,800 | about 292,500 |
| LCOE (purchase price only) | 6.75 cents | 6.75 cents | 5.80 cents |
Notice the Houston LCOE is the same in both cases: the panels make power for about 6.75 cents per kWh either way. What differs is the value of that power. When exports earn 5 cents, every exported kWh is worth less than it cost to make. That is the core Texas problem in one number.
To build this yourself in a spreadsheet: column A years 0 to 25; column B savings (year-one savings x (1 + rate growth)^(year minus 1) x (1 minus degradation)^(year minus 1)); put the negative cost in year 0; subtract any repair costs in the year they occur; then use the NPV and IRR functions.
How batteries change the payback math
A battery's bill savings come from shifting solar power you would have exported at a low value into hours when you would have bought power at full price. Its value per kWh shifted is roughly your purchase price minus your export credit, less some energy lost in charging and discharging.
Illustration: a 13 kWh battery at EnergySage's reported first-half 2026 price of about $1,130 per kWh costs about $14,700. Say it shifts 8 kWh a day, every day (2,920 kWh a year).
- In Houston with exports worth 5 cents: 2,920 x ($0.1591 minus $0.05) = about $319 a year. Bill-only payback: about 46 years.
- In Houston with no buyback: 2,920 x $0.1591 = about $465 a year. About 32 years.
- Under Florida IOU net metering or Austin's Value of Solar, there is little or nothing to shift, so bill savings are near zero.
On bill savings alone, batteries rarely pay back in these markets. People buy them for outage backup, which has real value that a payback formula does not capture. Count it separately. See home battery sizing and battery backup for outages.
Start to finish: checking a Dallas quote
Here is the whole method applied to one made-up quote, so you can follow it with your own numbers.
- The quote: 10 kW for $25,000. Price per watt: $25,000 / 10,000 W = $2.50. That is above EnergySage's $2.26 Texas average but well below Berkeley Lab's 2025 national median as reported by Mercom (a secondary summary), so it is in a normal range. No rebate applies, and no federal credit for a 2026 install. Net cost: $25,000.
- Production: PVWatts for Dallas shows about 1,506 kWh per kW, so about 15,060 kWh in year one for a south-facing roof. The quote claims 15,400 kWh, about 2% higher. Close enough, but ask what drives the difference.
- Split: Smart Meter Texas data, lined up with PVWatts hourly output, suggests the home uses about 60% of its solar on the spot (9,036 kWh) and exports 40% (6,024 kWh). This is our assumption for the example.
- Values: the home's per-kWh charges total about 15.91 cents (we use EIA's August 2026 Texas average as a stand-in), and its plan credits exports at 8 cents (assumed).
- Savings: 9,036 x $0.1591 = $1,438, plus 6,024 x $0.08 = $482. Total: about $1,920 a year.
- Simple payback: $25,000 / $1,920 = about 13.0 years.
- Add degradation (0.5% a year): 13.4 years at 0% rate growth; 12.0 years at 2%.
- Long view: 25-year net savings of about $20,200 at 0% rate growth (IRR about 5.3%) or about $32,600 at 2% (IRR about 7.2%).
If the seller's proposal showed a 7 year payback for this system, you would now know to ask which assumption differs: the export value, the rate escalation, a tax credit that no longer applies, or the production estimate.
Why installer savings estimates differ so much
Check a proposal against these red flags:
- A 30% federal credit subtracted from a 2026 purchase price. It does not apply.
- Rate escalation of 4% to 6% a year with no sensitivity table.
- Every kWh valued at retail in a Texas retail choice area, when your plan pays less for exports.
- Production above PVWatts for your roof without a shading report to explain it.
- No degradation in the 25-year total.
- Bill savings that include fixed charges that solar cannot remove.
- No inverter, roof or insurance costs.
- Florida systems sized above annual use with surplus valued at retail; under Rule 25-6.065 leftover annual credits are paid at the avoided cost rate.
In Texas, Business and Commerce Code chapter 115 requires sellers to give residential customers any performance or financial representations in writing, and Occupations Code 1806.201 prohibits false or misleading statements in residential solar sales. Keep the proposal. See how to review a solar quote.
Payback with a lease or PPA
With a lease or PPA you do not buy the system, so classic payback does not apply. Instead compare, year by year, your lease or PPA payment plus remaining utility bill against your utility bill without solar. Pay attention to escalators: a yearly increase of even 2% to 3% in the PPA price compounds over 20 or more years, and Texas law requires leases and PPAs to disclose any escalator in writing. EnergySage reported that in the first half of 2026 a cash purchase beat a no-prepay PPA by 33% on cost per kWh. See lease vs PPA vs ownership.
How to choose a provider
- Get the total price and system size, and compute price per watt.
- Subtract only rebates you will actually receive; no 25D for 2026 installs.
- Run PVWatts for your address, roof direction and tilt.
- Estimate the self-used vs exported split from interval data.
- Look up your utility's or plan's export rules.
- Use your bill's per-kWh charges, not the average price.
- Compute simple payback, then rerun at 0%, 2% and 3% rate growth.
- Apply 0.5% yearly degradation.
- Add inverter, roof and insurance costs in the years they occur.
- Compute IRR and compare it to other uses of your money.
- Price any battery separately and list backup value as its own benefit.
Related residential solar installers guides
- Is Solar Worth It in Texas in 2026? An Honest Breakdown by Utility and City
- Is Solar Worth It in Florida in 2026? Savings, Net Metering and Hurricane Reality
- How Much Do Solar Panels Cost in Texas and Florida? Price per Watt Explained (2026)
- What Size Solar System Do I Need? How Many Panels for a Texas or Florida Home
- How Do Texas Solar Buyback Plans Work Without Net Metering?
- How Does Net Metering Work in Florida? PSC Rule 25-6.065, Credits, True-Up and Tiers
- Is There Still a Federal Solar Tax Credit in 2026?
- How Do I Read and Compare a Solar Proposal?
Residential solar installers by state and city
Questions people ask
What is a good solar payback period?
There is no official standard, but shorter is better and it should be well inside the system's expected life. EnergySage describes 25 years as the warranty term of most solar panels. A payback under about 10 years leaves many years of savings; one approaching 20 years leaves little margin for repairs or a move. EnergySage's marketplace averages are 12.75 years in Texas and 10.23 years in Florida.
What is the average solar payback in Texas?
EnergySage estimates 12.75 years from its marketplace data as of November 2026. Our worked examples for an 8 kW system at $2.26 per watt ranged from about 9 years (Austin Energy with its $4,000 rebate) to about 20 years (a Houston retail plan with no buyback), showing how much export value matters in Texas.
What is the average solar payback in Florida?
EnergySage estimates 10.23 years from its marketplace data as of November 2026. Our 8 kW examples for Miami and Tampa at $2.12 per watt, using EIA's August 2026 Florida average price and full net metering credit within annual use, came to about 9 years. Municipal utilities with lower export credits, such as JEA, take longer.
How do I value exported kWh vs self-consumed kWh?
A self-consumed kWh is worth the per-kWh charges you avoid on your bill. An exported kWh is worth whatever your utility or plan credits: the full rate within annual use for Florida investor-owned utilities, a contract rate in Texas retail choice areas, the fuel rate at JEA, or Austin Energy's Value of Solar rate for all production.
How does the end of the federal tax credit change payback?
It raises net cost by 30% of qualified costs, so simple payback rises by about 43% if nothing else changes. For example, a system that would have paid back in 7 years with the credit takes about 10 years without it. The credit does not apply to home systems installed after December 31, 2025.
How do I use PVWatts to estimate production?
Go to pvwatts.nlr.gov, enter your address, then enter the system size in DC kW, module type, roof azimuth (180 for south) and tilt equal to your roof pitch. Keep default losses of 14% unless you know your shading. Run each roof face separately. The result gives monthly and annual kWh estimates.
What is the break-even point for solar?
It is the year when your cumulative savings equal what you paid, the same thing as the payback period. After that, savings are net gain, minus any later repair costs. If you sell the home before break-even, whether you recover the rest depends on what buyers will pay for the system.
Sources
- PVWatts v8 API, Houston run (National Laboratory of the Rockies)
- PVWatts v8 API, Dallas run
- PVWatts v8 API, Austin run
- PVWatts v8 API, San Antonio run
- PVWatts v8 API, Miami run
- PVWatts v8 API, Tampa run
- PVWatts v8 API, Orlando run
- PVWatts v8 API, Jacksonville run
- Jordan and Kurtz, Photovoltaic Degradation Rates: An Analytical Review (NREL, 2012)
- EIA Electric Power Monthly Table 5.6.A
- EIA Electric Power Monthly Table 5.6.B
- EnergySage: Texas solar panel cost (Nov 2026)
- EnergySage: Florida solar panel cost (Nov 2026)
- EnergySage: Home energy market H1 2026 highlights
- Mercom: summary of LBNL Tracking the Sun (Oct 2026)
- IRS: Residential Clean Energy Credit
- IRS FS-2025-05: FAQs on P.L. 119-21 credit changes
- Florida PSC Rule 25-6.065 (text)
- FPL: Net metering
- Tampa Electric: Solar incentives and net metering
- JEA: Distributed generation
- OUC: How to apply for solar for your home
- Austin Energy: Value of Solar rate
- Austin Energy: Increased home solar rebate (Aug 2026)
- CPS Energy: Solar Billing Facts
- CPS Energy: Residential customer-owned solar
- Texas Utilities Code Chapter 39 (Sec. 39.916)
- Texas Business and Commerce Code Chapter 115
- Texas Occupations Code Chapter 1806
- Florida Statute 212.08
This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.


