New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Standby generator installation

How to Start a Generator Sales and Installation Business in Texas or Florida

A generator business sits on top of several licenses, not one. This guide maps the license stack in Texas and Florida, the insurance rules, how dealer programs and maintenance contracts work, and what we could and could not verify about costs and margins.

You cannot legally install a standby generator on one license in either state. Texas needs a TDLR electrical contractor license (with a master electrician) and, for propane, a Railroad Commission LP-gas license, plus a plumbing license for natural gas piping. Florida needs a DBPR certified electrical contractor and, for propane, an FDACS Category V installer license. Manufacturer dealer terms are set privately.

Key facts

  • Texas Occupations Code 1305.151 bars performing or offering electrical work without a chapter 1305 license, except as exempted. A TDLR electrical contractor license requires employing a licensed master electrician and costs $110 to apply.
  • Texas electrical contractors must carry liability insurance of at least $300,000 per occurrence, $600,000 aggregate and $300,000 aggregate for products and completed operations, and show workers' compensation proof or an election not to carry it.
  • In Texas, companies (including sole proprietors) need a Railroad Commission license to install, service, sell or repair LP-gas equipment, and individual workers need RRC certification. A Category D license costs $100 to apply and $70 to renew.
  • In Texas, natural gas piping to a generator is plumbing work under Occupations Code 1301.002 and falls under the Texas State Board of Plumbing Examiners.
  • Florida certified electrical contractors hold a DBPR certificate of competency and may work statewide. Registered contractors may work only in the jurisdictions where they registered. The DBPR renewal fee shown is $296, due Aug. 31 of even years.
  • Florida rule 61G6-5.008 requires electrical contractors to carry $100,000 per person and $300,000 per occurrence liability coverage with $500,000 property damage (or an $800,000 combined single limit), plus workers' compensation or a Chapter 440 exemption.
  • A Florida Category V LP Gas Installer license costs $200 for one year, requires $1 million in liability insurance, a state exam and a full-time master qualifier, and since July 1, 2024 a qualifier needs one year of LP gas experience or a manufacturer professional certification.
  • In Texas, service contracts must be registered with TDLR unless exempt. In Florida, a maintenance service contract of one year or more is a service warranty under Florida Statute 634.401(13).
  • A September 2026 Homeyou guide puts typical installed cost of a permanent standby generator at $7,882 to $15,050 (average $10,941), with gas piping and propane tanks often extra.
  • We found no published dealer program minimums, startup cost figures or installer margin data from a named, dated source, so none are given.

How do I start a generator installation business? The short version

A standby generator install is three trades in one job: electrical, fuel gas and building permits. A company that sells and installs them must hold the license for each part of the work it does, or must hire a licensed company for that part. Most new generator businesses start in one of three ways:

  • an existing electrical contractor adds generators to its services;
  • an HVAC, plumbing or propane company adds generators and partners with or hires the electrical side; or
  • a new company is formed around a licensed master electrician (Texas) or certified electrical contractor (Florida).

The steps are:

  1. Decide which work you will do yourself: electrical, gas piping, tank setting, sales only.
  2. Get the state licenses for that work (next sections).
  3. Form the business and carry the required insurance.
  4. Apply to one or more manufacturer dealer programs, or decide to install units you buy through distributors.
  5. Learn the local permit process in each city and county where you work.
  6. Build a maintenance plan offering, within the service contract rules.
  7. Market with proof of license, because customers and inspectors will ask for it.

This page is general information, not legal or tax advice. Talk to the licensing agencies, an attorney and an insurance agent before you start.

What licenses do I need to sell and install generators in Texas?

Texas puts three agencies in the picture for a typical natural gas or propane standby unit: the Texas Department of Licensing and Regulation (TDLR) for electrical work, the Railroad Commission of Texas (RRC) for LP-gas (propane), and the Texas State Board of Plumbing Examiners for natural gas piping.

Electrical: TDLR

Texas Occupations Code 1305.151 says a person or business may not perform or offer to perform electrical work unless licensed under chapter 1305, except as exempted in section 1305.003. A licensed electrical contractor must employ a licensed master electrician. TDLR says the master may also be the business owner and generally can be assigned to only one contractor unless the master owns more than 50 percent of the business.

ItemRequirement
Master electricianJourneyman for at least two years plus 12,000 hours of on-the-job training under a Texas master; $45 application fee
Journeyman electrician8,000 hours of supervised work (7,000 to sit for the exam); $30 application fee
Apprentice electricianNo experience or exam; $20 fee
Electrical contractor (the business)Employ a licensed master electrician; $110 non-refundable application fee; renew every year

If you are not an electrician, the practical path is to hire a master electrician as your master of record, or to form the company with a master as an owner. Because the law also covers offering to perform electrical work, ask TDLR before you advertise a package that includes electrical wiring through a subcontractor.

Propane: Railroad Commission

Under Natural Resources Code 113.081, a Railroad Commission license is required for container activities (assembling, repairing, testing, selling and installing containers) and systems activities, including laying or connecting pipes and fittings that serve LP-gas systems and appliances. The RRC says companies, including sole proprietors, need a license to install, service, sell or repair LP-gas equipment, and individual workers need certification by exam. Under 16 TAC 9.6, a Category D (general installers and repairmen) license covers sale, service and installation of LP-gas containers and service, installation and repair of piping and appliances, with a $100 original fee and a $70 renewal. A Category E (retail and wholesale dealer) license covers storage, sale, transport and distribution and costs $750 to apply and $300 to renew. All individual certifications expire May 31 each year. Most require a training course in the first year and continuing education every four years. The Service and Installation certification (exam B-3) covers all LP-gas activities on stationary systems, including containers and appliances, but not filling containers or driving a transport.

A master or journeyman plumber, or a Class A or B air conditioning and refrigeration contractor, can register with RRC for a $50 exemption from Category D licensing and exams. The RRC says the exemption lets only the individual holder do LP-gas work. This is how many plumbing and HVAC companies add propane work.

RRC adopted the 2017 edition of NFPA 58 and the 2018 edition of NFPA 54, with Texas changes, effective Sept. 1, 2020. Florida adopted newer editions, so do not assume that tank distances match across the two states.

Natural gas piping: plumbing board

Texas Occupations Code 1301.002 defines plumbing to include piping that supplies gas and piping outside a building that connects to a gas supply on the premises. Natural gas piping to a generator is therefore plumbing work. The State Board of Plumbing Examiners issues master, journeyman and other plumbing licenses. Ask the board how its rules apply to your crew and to any subcontractor.

Permits and local rules

Senate Bill 1202 (2025) lets a qualified third party review and inspect home backup power for one- and two-family dwellings, and the city or county must issue approval within three business days after the third party approves. Senate Bill 1252 (2025) limits city rules on residential backup systems of up to 50 kW, but TDLR says licensed electrical contractors and the National Electrical Code still apply. Our Texas permit guide and Texas installer licensing guide go further.

What licenses do I need in Florida?

Florida uses the Department of Business and Professional Regulation (DBPR) for electrical and plumbing contractors, and the Department of Agriculture and Consumer Services (FDACS) for LP gas.

Electrical: DBPR Electrical Contractors' Licensing Board

Under Florida Statute 489.505, an electrical contractor installs, repairs, alters, adds to or designs electrical wiring, fixtures, appliances and apparatus that generate, transmit, transform or use electrical energy. A certified electrical contractor holds a certificate of competency from DBPR and may work anywhere in Florida. A registered electrical contractor has met competency rules in a particular jurisdiction and may contract only in the cities or counties where registered. DBPR lists specialty categories too, including residential electrical contracting. Check the scope chart to see whether a limited license covers generator work.

To be certified, an applicant must be at least 18, pass the certification exam and meet experience criteria, such as three years of management experience within the prior six years, or four years as a supervisor or contractor within the prior eight years (Florida Statute 489.511). DBPR says exams are computer-based through a testing vendor. Section 489.521 also requires evidence of financial responsibility and business reputation of the contracting business, under board rules, and evidence of public liability and property damage insurance before initial certification. Renewal is shown as $296 by Aug. 31 of each even year.

Propane: FDACS Category V

FDACS licenses businesses that sell, store or dispense LP gas and those that install, service or repair LP gas containers, systems or appliances. A Category V LP Gas Installer license covers installing, servicing, designing, modifying and repairing piping, tubing, appliances, equipment and tanks. It costs $200 for one year, $400 for two or $600 for three. Category I dealers and Category V installers must carry at least $1 million in bodily injury and property damage liability insurance, pass a state exam and employ a full-time master qualifier at the licensed location. The exam requires at least 70 percent in each area, and the exam fee is $20. Since July 1, 2024, a qualifier applicant needs at least one year of verifiable LP gas experience or an LP gas manufacturer professional certification. Each business location must be licensed separately. Doing licensed LP gas work without a license intentionally or willfully is a third-degree felony under Florida Statute 527.02, and Florida Statute 527.06 sets civil penalties up to $25,000 per violation per day.

Natural gas piping

Florida Statute 489.105 includes installing water, natural gas and LP gas lines and related venting in a plumbing contractor's scope. Both plumbing contractors and Category V installers may install gas piping, so check which license your company will use. Also, Florida's rule 5J-20.002 adopts NFPA 58 (2024), NFPA 54 (2024) and NFPA 110 (2025), effective Nov. 17, 2026.

Permits

Florida permits are local. Check each building department. See our Florida permit guide and the Florida installer licensing guide.

Can an HVAC or plumbing company add generator installs?

Yes, but it only covers part of the job. Here is how it plays out.

If you areTexasFlorida
Plumbing companyCan handle natural gas piping under plumbing licenses. Can register for the RRC plumber exemption for LP-gas. Still needs a TDLR electrical contractor (with a master electrician) for wiring and the transfer switchPlumbing contractor scope includes natural gas and LP gas lines. Still needs a DBPR certified or registered electrical contractor for wiring
HVAC companyClass A or B air conditioning and refrigeration contractors can register for the RRC exemption. Electrical work still needs a TDLR licenseCheck whether your license covers gas piping; electrical needs DBPR electrical licensing
Propane dealerHolds RRC Category E or D. Needs electrical licensing for wiringHolds FDACS Category I or V. Needs electrical licensing for wiring
ElectricianHas the wiring side. Needs plumbing license for natural gas piping and RRC licensing for LP-gas, or a licensed partnerHas the wiring side. Needs a licensed partner or license for gas piping

The usual solutions are a formal partnership, a subcontract with a licensed company, or adding the missing licensed person to your staff. Each state has rules on subcontracting and on who must be on the permit, which We did not review in full. Ask the licensing agency, and have the permit pulled by the license holder who does the work.

How do I become a manufacturer dealer?

Manufacturers such as the makers of residential standby generators run dealer programs. We could not verify published requirements. The terms are set in private dealer agreements and vary by brand and region, and We found no manufacturer document that lists minimum training hours, sales volume or insurance limits. Third-party guides describe a typical process, so treat these as questions to ask the manufacturer's dealer development team, not as facts:

  • What proof of business registration, state licenses and insurance do you need?
  • Is there a factory training requirement for installers and technicians? How many people must attend?
  • Do you offer different dealer tiers, for example sales only versus sales and service?
  • What is the service obligation for warranty work, and what territory do you get?
  • How long does approval take?

Generator manufacturers set the warranty terms. See our warranty guide. Installation mistakes can create warranty disputes, so treat the manufacturer's installation manual as a second code you must follow.

You can also install units bought through distributors without a formal dealer agreement. In that case you still need every state license, and you may have less support on warranty claims.

What insurance does a generator installer need?

The state rules set minimums for the license. Your clients, landlords and commercial customers may require more.

RequirementTexasFlorida
Electrical contractor liabilityAt least $300,000 per occurrence, $600,000 aggregate and $300,000 aggregate for products and completed operations$100,000 per person and $300,000 per occurrence, plus $500,000 property damage or an $800,000 combined single limit (61G6-5.008)
Workers' compensationProof, a self-insurance certificate, or a statement electing not to carry coverageCoverage or a Chapter 440 exemption; keep it continuously; the board audits at least 10 percent of certificate holders
LP gasCheck RRC licensing rules for liability and financial responsibility requirements, which We did not verify hereAt least $1 million in bodily injury and property damage liability (FDACS Category I and V)

In Florida, the certificate of insurance must name the DBPR Electrical Contractors' Licensing Board as certificate holder. Selected licensees must show proof of coverage within 30 days of a written request. These are minimums. An insurance agent who works with contractors can tell you what coverage fits generator work, including fire and gas hazards. I have no sourced price for any policy, so none is given.

How much does it cost to start a generator business?

We did not find a named, dated source for the total cost of starting a generator installation business, so We will not give one. What I can give are the license fees from official sources, and the kinds of costs to plan for.

ItemFee from an official source
Texas electrical contractor application (TDLR)$110
Texas master electrician application$45
Texas journeyman electrician application$30
Texas RRC Category D (original / renewal)$100 / $70
Texas RRC Category E (original / renewal)$750 / $300
Texas RRC plumber or ACR exemption registration$50
Florida DBPR electrical renewal (every two years)$296
Florida FDACS Category V installer$200 (1 year), $400 (2 years), $600 (3 years)
Florida FDACS LP gas exam$20

Other costs to price with real quotes in your area: insurance premiums, a truck and trailer, tools and test equipment, a gas leak detector and pressure gauges, a laptop or tablet for the controller software, permits (the Inch Calculator 2023 guide says generator permits usually cost $50 to $200, varying by city), training, software and marketing. Do not copy another company's startup budget. Build yours from quotes.

What are the margins on standby generator installs?

We found no named, dated source for installer margins, so We do not give a percentage. What is public is what customers are quoted, which gives a sense of job size. These are consumer cost guides, not installer financials:

  • The Homeyou cost guide (September 2026) puts generator installation at $6,927 to $13,955, an average of $9,886. It puts permanent standby installation at $7,882 to $15,050, an average of $10,941, and notes gas piping, propane tanks, trenching and some fees are often separate. Its South region range was $6,375 to $12,699.
  • The Inch Calculator guide (August 2023) says labor and installation usually run $2,000 to $5,000 on top of the unit, and electricians charge $50 to $200 an hour.

To find your own margin, track the unit cost, labor hours, gas and electrical subcontract costs, permits, truck time, warranty callbacks and the cost of sales for each job. Callbacks and weather delays are where small jobs lose money. Both states also have price gouging rules in declared emergencies; see our price gouging guide.

How do I offer maintenance contracts?

Recurring maintenance is where many generator companies build steady revenue, but a contract that promises repair or replacement can be regulated as a service contract. The rules differ in each state.

Texas: Occupations Code chapter 1304

A service contract is an agreement, for separately stated consideration and a specified term, under which a provider agrees to repair, replace or maintain a product or provide other covered services. A person may not operate as a provider or administrator unless registered with TDLR (section 1304.101). The chapter exempts, among other things, maintenance agreements that provide only scheduled maintenance for a limited period, and contracts sold to someone who is not a consumer (section 1304.004(b)). It does not define limited period in the summary We reviewed. A provider that is not exempt must meet one of three financial security options, such as a reimbursement insurance policy or a funded reserve account and security deposit (section 1304.151). Ask TDLR whether your plan is exempt.

Florida: Chapter 634, Part III

Under Florida Statute 634.401(13), a service warranty includes a maintenance service contract equal to or greater than one year. A maintenance service contract written for less than one year is excluded only if it does not contain provisions for indemnification and does not give the consumer a discount of more than 20 percent on any combination of parts and labor. We did not verify other exemptions or how the Office of Insurance Regulation treats a plan sold by the installer itself, so confirm that with the Office of Insurance Regulation or an attorney.

Design tips

  • A simple plan that covers scheduled inspections and oil, filter and spark plug service, with parts billed at normal prices, is the least complicated. Manufacturer schedules, for example, call for oil changes yearly or every 100 to 150 hours depending on model, and a weekly or biweekly exercise cycle.
  • A plan that promises to repair or replace a failed engine or controller for a fee is closer to a regulated service contract.
  • Write what is covered, what is not, how fast you respond in a storm and what happens if the unit is not accessible.

See our maintenance schedule guide.

Do I need an LP-gas license to sell propane-fueled generators?

It depends on what you do. Selling a generator as a boxed product is not the same as setting a tank or running gas pipe.

  • Texas: Natural Resources Code 113.081 requires an RRC license for container activities, including selling and installing containers, and for systems activities, including laying or connecting pipes and fittings serving LP-gas appliances. If your crew connects the gas line or sets the tank, you need RRC licensing or a licensed subcontractor.
  • Florida: Category V covers installing LP gas piping, appliances, equipment and tanks. If your company does that work, it needs the license and a master qualifier. A plumbing contractor may also install gas lines under Florida Statute 489.105.
  • Natural gas units: In Texas the piping is plumbing work. In Florida, a plumbing contractor or Category V installer may do it.

For tank sizes and clearances, see our guides on propane tank rules and natural gas versus propane.

How do generator dealers get leads?

We found no sourced lead data, so this section is a list of channels, not statistics.

  • Manufacturer dealer locators. Many manufacturers list authorized dealers on their sites. Ask the dealer program how listings work.
  • Home inspectors, builders and electricians. They see houses that need backup power.
  • HOAs and property managers. Our guides on Texas HOA rules and Florida HOA and condo rules explain what they will ask for.
  • Commercial accounts. Restaurants, small businesses and care facilities need planning help. Our Texas healthcare guide and Florida nursing home and ALF rule guide show what facility owners must do.
  • Storm events. Demand rises after outages, but so do scams. Do not use pressure sales, and follow price gouging rules.
  • Reviews and referrals. A license number, insurance proof and a written scope earn trust.

Be accurate in advertising. Do not claim a license you do not hold, and do not guarantee a permit or inspection result. A customer can check a Texas license on the TDLR site and a Florida license on the DBPR site.

How to choose a provider

  • Decide which parts of the job you will do yourself: electrical, gas piping, tank setting, sales only.
  • Texas: hire or become a TDLR master electrician, then apply for the electrical contractor license ($110) and meet the insurance minimums.
  • Texas: for propane, get RRC company licensing and certified individuals, or use the plumber or ACR exemption for the individual holder.
  • Texas: use a licensed plumber for natural gas piping.
  • Florida: qualify a certified or registered electrical contractor with DBPR, and show financial responsibility and insurance.
  • Florida: for propane, get an FDACS Category V license with a master qualifier and $1 million in liability insurance.
  • Get insurance quotes that meet the state minimums and your customers' contract requirements.
  • Ask each manufacturer's dealer program for written requirements, training and territory terms.
  • Ask the local building department how permits work in each city where you will work.
  • Ask TDLR or the Florida Office of Insurance Regulation whether your maintenance plan is a regulated service contract.

Related standby generator installation guides

Standby generator installation by state and city

Questions people ask

How do I start a generator installation business?

Decide which work you will do, get the state licenses for it, form the business, carry the required insurance, and apply for dealer programs or buy through distributors. In Texas that means TDLR electrical licensing with a master electrician, plus RRC and plumbing licenses for gas. In Florida, DBPR electrical licensing and FDACS or plumbing licenses for gas.

What licenses do I need to sell and install generators?

Texas: a TDLR electrical contractor license, an RRC LP-gas license for propane work, and plumbing licensing for natural gas piping. Florida: a DBPR certified or registered electrical contractor, an FDACS Category V installer license for LP gas, and plumbing or Category V licensing for gas lines. Local permits apply in both states.

How do I become a generator dealer?

Manufacturers set dealer terms privately, and We could not verify published requirements. Third-party guides suggest you will be asked for business registration, licenses and insurance and may need factory training, but that is not confirmed. Contact each manufacturer's dealer development team and ask for the requirements in writing.

How much does it cost to start a generator business?

We found no named, dated source for total startup cost. Official license fees include $110 for a Texas electrical contractor application, $100 for an RRC Category D license and $200 per year for a Florida Category V installer. Insurance, vehicles, tools and training must be quoted locally.

What insurance does a generator installer need?

Texas electrical contractors need at least $300,000 per occurrence, $600,000 aggregate and $300,000 products and completed operations, plus workers' compensation proof or an election not to carry it. Florida electrical contractors need $100,000 per person and $300,000 per occurrence with $500,000 property damage or $800,000 combined, and workers' compensation or an exemption. Florida LP gas licensees need $1 million.

Can an HVAC or plumbing company add generator installs?

Yes for the gas side, but not for electrical work. Plumbers can handle gas piping and may register for the Texas RRC exemption, and Florida plumbing contractors can install gas lines. Electrical wiring and the transfer switch still need a licensed electrical contractor in both states, so partner with or hire one.

How do I offer maintenance contracts?

Check whether the plan is a regulated service contract. In Texas, Occupations Code chapter 1304 requires provider registration with TDLR unless exempt, and exempts maintenance agreements that provide only scheduled maintenance for a limited period. In Florida, a maintenance service contract of a year or more is a service warranty under 634.401. Confirm with the regulator.

Do I need an LP-gas license to sell propane-fueled generators?

Selling the unit alone is different from installing the fuel system. If your company sets a tank or connects LP gas piping, you need RRC licensing in Texas or an FDACS Category V license in Florida, or you must use a licensed subcontractor. Confirm your exact activities with the agency.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration