New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · General and residential contractors

Building or Remodeling Your Own Home in Texas as an Owner-Builder

Texas has no general contractor license, so homeowners can legally build or remodel their own homes. The real rules are state trade licenses, city homeowner permits, rural septic and county inspection rules, and a lien law that treats every trade you hire as an original contractor.

Yes, you can build your own house in Texas without a contractor license, because Texas has no state general contractor license. You still need city permits where they apply, and plumbing, electrical and air conditioning are licensed trades with limited homeowner exemptions: plumbing in your own homestead (Occ. Code 1301.051) and electrical in your own home only where no city ordinance regulates it (1305.003). Rural builders deal with septic permits, county inspection orders and floodplain rules instead.

Key facts

  • Texas has no state license for general contractors or home builders; Austin states anyone, including homeowners, can be a general contractor.
  • The Texas Residential Construction Commission Act expired September 1, 2009, ending state builder registration.
  • Occupations Code 1301.051 lets a property owner perform plumbing in his or her homestead without a plumbing license.
  • Occupations Code 1305.003(a)(6) exempts electrical work by an owner-occupant only where no municipal ordinance specifically regulates it.
  • Dallas homeowner permits require a staff-witnessed or notarized affidavit and exclude pools, additions, new homes and permanent detached buildings.
  • In counties that opt into LGC ch. 233 subchapter F, new rural homes need at least 3 inspections: foundation, framing and mechanical, and final.
  • Health and Safety Code 366.051 requires a permit and approved plan for a septic system, issued by TCEQ or a local authorized agent.
  • When an owner hires trades directly, each trade is an 'original contractor' under Property Code ch. 53 with its own lien rights.
  • Texas owners must retain 10 percent of the contract price for 30 days after an original contract is completed.
  • In 2025, owner-built new homes in the South averaged 10.8 months from start to completion versus 9.0 months for contractor-built homes (Census).

Can I build my own house in Texas?

Yes. Texas has no state license for general contractors or home builders, so a homeowner can legally act as the general contractor on his or her own house. The City of Austin says it directly on its contractor registration page: "In Texas, anyone can be a General Contractor, including homeowners, and a state license is not required."

Texas did try state regulation once. The Legislature created the Texas Residential Construction Commission (TRCC) in 2003, which registered builders and ran a State Inspection Process for defect disputes. The Sunset Advisory Commission called that system "fundamentally flawed" in 2009, its Sunset bill (H.B. 2295) failed, and the TRCC Act expired September 1, 2009, with a wind-down to September 1, 2010. If an older article tells you to register with the TRCC, it is out of date.

So the real limits on Texas owner-builders are not a general contractor license. They are:

  • State trade licenses for electrical, plumbing, and air conditioning and refrigeration work, each with its own homeowner exemption;
  • City rules on who can pull permits and what a homeowner may do alone;
  • County and rural rules for septic systems, floodplains, driveways and, in some counties, required code inspections;
  • Lien law, because once you hire trades directly, each one can become an "original contractor" with lien rights against your property;
  • HOA deed restrictions, which can control design and require approval before you start.

Florida works very differently. There, s. 489.103(7) is a narrow exemption from a statewide license requirement, with a 1-year resale presumption. See the contrast table later on this page and our Florida owner-builder guide.

Can I do my own electrical, plumbing and HVAC work in Texas?

Texas licenses three building trades at the state level. Each law has a homeowner carve-out, but the carve-outs are not the same, and cities can narrow them.

TradeState license ruleHomeowner exemptionPractical catch
ElectricalOccupations Code 1305.151 requires a license to perform or offer electrical work (licensed by TDLR)Sec. 1305.003(a)(6): chapter does not apply to "work not specifically regulated by a municipal ordinance that is performed in or on a dwelling by a person who owns and resides in the dwelling"Inside most cities, electrical work is regulated by municipal ordinance, so the city's homeowner rules control. Dallas, for example, allows homeowner electrical repairs only after passing a city exam.
PlumbingOccupations Code 1301.351 requires a state license, registration or endorsement to perform plumbing (Texas State Board of Plumbing Examiners)Sec. 1301.051: "A property owner is not required to be licensed under this chapter to perform plumbing in the property owner's homestead."The exemption is for your homestead. A rental or a spec house does not qualify. Permits and inspections still apply where the city or county requires them.
Air conditioning and refrigerationOccupations Code 1302.251 requires an ACR contractor license; the state license is valid statewideCheck ch. 1302 and the city's homeowner mechanical permit rulesRefrigerant handling also has federal certification rules. Most owner-builders hire a licensed ACR contractor.

There is also a rural plumbing exemption. Sec. 1301.052 says no plumbing license is needed for plumbing on certain property outside cities, such as land not connected to a public water system, but it excludes plumbing done in conjunction with new construction, repair or remodeling. In other words, it does not cover building a new house.

Bottom line: you may legally do your own plumbing in your homestead, and you may do electrical work in your own home where no city ordinance regulates it. Inside city limits, plan on the city's homeowner permit process, which may include an exam or an affidavit, and inspections of every trade.

Can a homeowner pull a permit in Houston, Dallas, San Antonio or Austin?

Every large Texas city has a homeowner path, but each one is built differently. Here is what the cities' own pages say, as of November 2026.

Dallas: the homestead affidavit

Dallas lets homeowners act as their own contractor on their homestead without registering as a contractor. The catch is the affidavit, which you sign in front of city staff (electrical permits are witnessed by the district electrical inspector at a field office; other signatures not witnessed by staff must be notarized). You swear that:

  1. you will do the work yourself and "will not be assisted by any other person performing any part of the work for remuneration";
  2. you will comply with Dallas codes and get all inspection approvals before using or occupying the work; and
  3. if you default on either promise, you will hire a properly licensed contractor to get the permits and finish.

A Dallas homeowner's permit covers fences, portable accessory buildings, patio covers, interior remodeling of an existing home, plumbing, irrigation, mechanical work, roofing, and electrical repairs after passing a city exam. It does not allow a homeowner to build a swimming pool, a permanent detached accessory building, an addition, a new home, or a drive approach or sidewalk in the right-of-way. So in Dallas, building a new house or an addition yourself means hiring registered contractors for that permit. Dallas's remodel checklist also requires compliance with the EPA lead paint rule (40 CFR Part 745) on older homes.

Austin: register and get a PIN

Austin requires trade contractors, general contractors and "homeowners acting as contractors" to register with Building and Trade Contractor Services before starting construction on a building or trade permit. General contractors register once through the Austin Build + Connect portal and receive a Contractor/Homeowner PIN; there is no annual renewal because no license is required. Austin's general contractor on a permit is responsible for activating and paying for the permit, doing the approved work, scheduling inspections including the final, and getting the certificate of occupancy or completion. Homeowners acting as trade contractors use a separate homeowner trade-permit process.

San Antonio

San Antonio's Development Services Department says "most construction projects require a licensed contractor" registered with the city. Ask DSD about its homeowner permit path for your specific project before you plan to do the work yourself. San Antonio states its initial review of building plans typically takes three business days.

Houston

The Houston Permitting Center handles residential permits and inspections. We could not confirm Houston's current homeowner-permit rules from its website at the time of writing, so call or visit the Permitting Center and ask: whether a homeowner may be the permit holder for your project type, whether homestead proof or an affidavit is required, and which trade permits must go to a licensed electrician, plumber or ACR contractor.

Our city pages track local offices and rules: Houston, Dallas, San Antonio and Austin. For city registration in more detail, read Texas city contractor registration.

Building outside city limits: county rules, septic, floodplain and driveways

Much of the Texas owner-builder story happens on rural land, where there may be no building permit at all. Texas counties have limited building-code power. That does not mean there are no rules.

County building code and the 3-inspection rule

Local Government Code ch. 233, subchapter F, lets a county adopt an order requiring new homes in its unincorporated area to follow a residential building code. In a county that has opted in, new single-family houses and duplexes on vacant lots (and additions that increase a home's square footage or value by more than 50 percent) must conform to the International Residential Code version published as of May 1, 2008, or the IRC version used in the county seat (s. 233.153).

Under s. 233.154, the builder must have at least three inspections done:

  1. the foundation stage, before concrete is placed;
  2. the framing and mechanical systems stage, before drywall or other wall covering; and
  3. on completion of the residence.

The builder (that is you, as owner-builder) hires the inspector. The statute allows a licensed engineer, a registered architect, a professional inspector licensed by the Texas Real Estate Commission, a municipal plumbing inspector licensed by the State Board of Plumbing Examiners, a building inspector employed by a political subdivision, or an ICC-certified residential combination inspector. You may use one inspector for all three or different ones.

The county may require a start notice (location, approximate start date and the IRC version) and a notice of the final inspection result within 10 days after it. The law does not let the county require prior approval before you start, or charge a fee to enforce these standards. Failing to give notice can be a Class C misdemeanor for a builder, but s. 233.157(c) says an individual who builds the home or acts as his or her own contractor and intends to use it as a primary residence is not subject to that penalty for missed notices. The inspections are still a good idea, and the law still requires them.

If you are in a city's extraterritorial jurisdiction (ETJ) and the city has adopted a building code there, the city's code controls instead.

Septic systems (OSSF)

Most rural lots need an on-site sewage facility (OSSF), the legal term for a septic system. Health and Safety Code ch. 366 says a person must hold a permit and an approved plan to construct, alter, repair, extend or operate one (s. 366.051). The permit comes from the local "authorized agent" (often the county or a river authority) if one exists, or from the Texas Commission on Environmental Quality (TCEQ). The system may not be used until it is inspected and approved (s. 366.055). The chapter's stated purposes include allowing an individual owner to install and repair his or her own system in accordance with the law and rules, so ask the authorized agent what an owner-installer must do.

One statutory exception: s. 366.052 says the permit sections do not apply to a single residence on a tract of 10 acres or more when the field line is at least 100 feet from the property line, though the effluent must still stay on the property, cause no nuisance and not pollute groundwater. Confirm with the authorized agent before relying on it, since local rules and buyers' expectations may still call for documentation.

Floodplain, driveways and culverts

  • Floodplain. Ask the county floodplain administrator whether any part of your lot is in a mapped flood zone and whether a floodplain development permit or elevation certificate is required. Building in a floodplain without one can make flood insurance hard to get and can stop a future sale.
  • Driveway and culvert. Connecting a driveway to a county road or a state highway usually needs permission from the road's owner (the county road department or TxDOT), often with a culvert sized for drainage.
  • Platting and lot rules. Land division rules under Local Government Code ch. 232 can affect whether you can get utilities. Check before you buy land.

For more on rural land, read buying land to build a house and the Texas barndominium guide.

Hiring subcontractors as an owner-builder

As owner-builder you are the general contractor. You find, schedule, pay and coordinate every trade. A typical new house involves a surveyor, a foundation engineer, a concrete or foundation crew, framers, roofers, window and door installers, plumbers, electricians, an HVAC contractor, insulation, drywall, painters, flooring, cabinets and countertops, trim carpenters, and site work.

Checks for each trade

  • License: verify electricians and ACR contractors with the Texas Department of Licensing and Regulation and plumbers with the Texas State Board of Plumbing Examiners. Check city registration where required.
  • Insurance: get a certificate of insurance naming you as certificate holder, showing general liability and, if the trade has employees, whether it carries workers' compensation.
  • Written contract: scope, price, schedule, cleanup, who pulls which permit, payment terms and lien waivers. On a homestead, the written contract matters for lien law too.
  • References and past work: see how to check references.

Workers' compensation in Texas

Texas is unusual: Labor Code 406.002 makes workers' compensation coverage generally elective for private employers. Many trades do not carry it. That means an injured worker on your property may look to you or your homeowner's policy. If a trade has no coverage, ask about its occupational accident policy, require general liability insurance, and talk to your insurer before work begins.

Can an owner-builder hire a construction consultant?

Yes. Some owners hire an experienced builder or construction manager as a paid consultant to review plans and bids, set the schedule, and visit the site at key stages, while the owner still signs the trade contracts. Write down exactly what the consultant does and does not do, how he or she is paid (hourly, fixed fee or percentage), and whether the consultant supervises trades. If the consultant takes over running the job, he or she may in effect become your contractor, which affects lien rights, insurance and liability.

Lien risk: when you become the 'original contractor's' customer

This is the part of owner-building that surprises people most. Under Texas Property Code ch. 53, an "original contractor" is "a person contracting with an owner either directly or through the owner's agent." When you hire a general contractor, only that one company is your original contractor, and the subs work under it. When you act as your own GC, every plumber, framer and supplier you hire directly is an original contractor.

What that means for you:

  • More lien claimants. Each direct trade can file a lien affidavit for unpaid work. On a residential project, an original contractor must file by the 15th day of the third month after the month its work was completed, terminated or abandoned (the post-2022 rules under H.B. 2237).
  • Their subs and suppliers count too. If your electrician buys wire on account from a supply house and does not pay, that supplier can send you a notice of claim by the 15th day of the second month after delivery on a residential job, and may lien your property if you did not withhold.
  • Retainage. Texas owners must retain 10 percent of the contract price, or of the value of work done, during the work and for 30 days after each original contract is completed. If you fail to retain, valid claimants have a lien at least for what you should have held. With many direct contracts, you track retainage on each one.
  • Homestead protection. To place a lien on a homestead, the person furnishing labor or materials and the owner must sign a written contract before any work or materials, and it must be filed with the county clerk; if the owner is married, both spouses must sign. This protects you, but it does not excuse paying late.

How to protect yourself

  1. Use written contracts with every trade.
  2. Hold 10 percent retainage on each contract for 30 days after that trade finishes.
  3. Get a conditional lien waiver on the statutory form with each payment, and an unconditional waiver once the payment clears. Texas waivers must substantially comply with the four statutory forms in Property Code 53.284.
  4. Ask each trade for a list of its suppliers and subs, and a bills-paid affidavit at final payment.
  5. Read every notice of claim that arrives and withhold that amount from the trade until it is resolved.

Details are in our Texas mechanic's lien guide and Texas lien waivers and releases. This is general information, not legal advice; for a real lien filed on your home, talk to a Texas real estate or construction attorney.

Inspections, insurance and selling an owner-built home

Inspections

Inside a city, you will call in the city's inspections (foundation, framing, rough electrical, plumbing and mechanical, insulation or energy, and final). If the city misses its deadline, Local Government Code ch. 247 (H.B. 14, effective September 1, 2023) lets a qualified third party do an overdue review or inspection 15 days after the deadline, at no added city fee. On rural land, you hire the inspectors yourself. Either way, many owner-builders also hire a TREC-licensed professional inspector for phase inspections. See building inspections explained.

On the Texas coast, wind is its own issue. Texas Insurance Code 2210.251 requires structures in the coastal catastrophe area that were built, altered, remodeled, enlarged or repaired on or after January 1, 1988 to comply with the windstorm plan of operation to be insurable by the Texas Windstorm Insurance Association (TWIA). The Texas Department of Insurance issues WPI-8 certificates of compliance and lists inspectors on its windstorm pages. Plan inspections before walls are closed.

Insurance

Before the first load of lumber, ask your insurer about builder's risk coverage (fire, theft, storm damage to the structure under construction), general liability for injuries to visitors and workers, and how your existing homeowner's policy treats a major remodel. Theft of materials and appliances from open job sites is common.

Selling a house you built yourself

Texas has no owner-builder resale waiting period like Florida's. You can sell an owner-built home. Expect buyers and their inspectors to ask for permits, inspection records, engineering letters for the foundation, and warranties. A seller of a newly built home of up to four units intended as the buyer's principal residence must provide a bills-paid affidavit at closing under Property Code ch. 53. Texas's defect law (the Residential Construction Liability Act, Property Code ch. 27) and the Deceptive Trade Practices Act can also apply to builders who sell, so keep thorough records. See Texas RCLA defect claims.

Texas vs Florida owner-builder rules at a glance

IssueTexasFlorida
State GC licenseNone; anyone can be a general contractorRequired, with owner-builder exemption in s. 489.103(7)
Own-use requirementNone at state level for building; plumbing exemption is homestead-only; city homeowner permits are often homestead-onlyYes: own use, not for sale or lease
Resale waiting periodNoneSale or lease within 1 year creates a presumption of violation
Commercial workNo state GC limit; trade licenses applyOwner's own commercial building up to $75,000
Disclosure statementCity affidavits (for example, Dallas)12-item statutory disclosure
Rural inspectionsOnly in counties that opt into LGC ch. 233 subchapter F; builder hires inspectorsStatewide building code with local enforcement
Workers' compGenerally elective for private employersRequired in construction with 1 or more employees

Risks of being an owner-builder, and how long it takes

The U.S. Census Bureau's Survey of Construction tracks how long new homes take. In 2025, new single-family homes in the South region averaged 9.0 months from start to completion when contractor-built and 10.8 months when owner-built. Nationally, the 2025 averages were 10.5 and 12.8 months. Owner-builders take longer mainly because they are learning while they schedule, and because trades give priority to the contractors who send them steady work.

RiskWhat it looks likeHow to reduce it
Schedule slipTrades no-show; inspections fail and must be rebookedBook trades in writing with dates; build float into the schedule
Budget overrunMissed items in bids, change orders, wasteLine-item bids; a contingency in your budget
LiensUnpaid supplier liens your houseRetainage, statutory waivers, written contracts
Injury liabilityUninsured worker hurt on siteVerify insurance, talk to your insurer
Code failuresRework after failed inspectionPre-inspections by a TREC-licensed or ICC-certified inspector
WeatherSummer heat, storms, hurricane season on the coastSchedule concrete and roofing around weather; protect materials

Read construction timelines and delays for planning help, and the custom home building process if you are weighing a builder instead.

How to choose a provider

  • Call the city building department (or county, if rural) and ask exactly what a homeowner may permit.
  • Confirm homestead status if you plan to use homeowner plumbing or city homeowner permits.
  • Check deed restrictions and HOA approval requirements before you design.
  • For rural land, contact the septic authorized agent, county floodplain administrator and road department.
  • Get licensed electrical, plumbing and ACR contractors where the law or city requires them.
  • Use written contracts with every trade, and on a homestead have them signed before work starts.
  • Hold 10 percent retainage on each trade contract for 30 days after that trade finishes.
  • Collect statutory conditional and unconditional lien waivers with every payment.
  • Collect certificates of insurance from every trade and call your insurer about builder's risk.
  • Hire a TREC-licensed or ICC-certified inspector for phase inspections, especially where the county has no inspections.
  • On the coast, plan windstorm inspections for a TDI WPI-8 certificate before walls close.
  • Keep every permit, inspection report and receipt for resale.

Related general and residential contractors guides

General and residential contractors by state and city

Questions people ask

Do I need a license to build my own house in Texas?

No state license is needed to be the general contractor on your own house. Texas has no general contractor license, and the City of Austin states that anyone, including homeowners, can be a general contractor. Electrical, plumbing and air conditioning work are licensed trades with limited homeowner exemptions, and cities set their own homeowner permit rules, so check with the building department before you start.

Can I do my own plumbing in Texas?

Yes, in your homestead. Occupations Code 1301.051 says a property owner does not need a plumbing license to perform plumbing in the owner's homestead. That does not cover rentals or spec houses. Cities and some counties still require permits and inspections, and work must meet the plumbing code. Many owners still hire a licensed plumber for the water heater, gas lines and the main sewer connection.

Can I do my own electrical work in Texas?

Sometimes. Occupations Code 1305.003(a)(6) exempts work in a dwelling by a person who owns and lives in it, but only for work not specifically regulated by a municipal ordinance. Inside most cities, electrical work is regulated by ordinance, so the city's rules apply. Dallas, for example, lets homeowners do electrical repairs only after passing a city exam. Outside cities, utility rules still govern service connections.

Do Texas counties require permits for owner-built homes?

Counties generally cannot require a building permit or prior approval for a new home. A county may opt into Local Government Code ch. 233 subchapter F, which requires new homes in unincorporated areas to follow the IRC and get at least three inspections, by inspectors the builder hires. Separately, septic systems need a permit from TCEQ or its authorized agent, and floodplain and driveway permits may apply.

Do I need a septic permit for rural Texas land?

Usually yes. Health and Safety Code 366.051 requires a permit and approved plan to construct, alter, repair or operate an on-site sewage facility, issued by the local authorized agent or TCEQ, and the system must be inspected before use. Section 366.052 exempts a single residence on 10 or more acres with the field line at least 100 feet from the property line. Confirm with the authorized agent first.

Can I sell a house I built myself in Texas?

Yes. Texas has no owner-builder resale waiting period. Buyers will want permits, inspection reports and engineering letters. A seller of a newly built home intended as the buyer's principal residence must provide a bills-paid affidavit at closing. Selling builders can also face defect claims under the Residential Construction Liability Act and the Deceptive Trade Practices Act, so keep complete records.

What insurance does an owner-builder need in Texas?

Ask your insurer about a builder's risk policy for the structure under construction, general liability for injuries on site, and how your current homeowner's policy treats construction. Because workers' compensation is generally elective for private employers in Texas, many trades will not carry it; require certificates of insurance from every trade and ask your insurer how an injured uninsured worker would be handled.

Can a homeowner pull a permit in Dallas?

Yes, on a homestead, for listed projects: fences, portable accessory buildings, patio covers, interior remodeling, plumbing, irrigation, mechanical, roofing, and electrical repairs after a city exam. You sign an affidavit before city staff promising to do the work yourself without paid help. Dallas homeowner permits do not cover pools, permanent detached accessory buildings, additions, new homes or right-of-way work.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration