New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Thu, Nov 19, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Plumbing

Why Are My Pipes Banging? Water Hammer, Whistling, Humming and Other Pipe Noises

Each pipe noise points to a different cause. Here is how to match the sound to the problem, test your water pressure, place a water hammer arrestor, and tell a harmless tick from a hidden leak.

Banging when a valve shuts is water hammer: a pressure shock from water stopping suddenly. Check your pressure with a hose-bib gauge; the plumbing code caps it at 80 psi. Then secure loose pipes and add ASSE 1010 water hammer arrestors at the washer, dishwasher and ice maker, which the code requires where quick-closing valves are used. A foghorn sound after flushing is a worn toilet fill valve. Hissing at night usually means a running toilet or a hidden leak.

Key facts

  • Florida Building Code, Plumbing (2023) 604.9 requires a water-hammer arrestor where quick-closing valves are used, conforming to ASSE 1010.
  • FBC Plumbing 604.8 requires a pressure-reducing valve where static pressure exceeds 80 psi, bringing it to 80 psi or less.
  • FBC Plumbing 607.3 requires a thermal expansion control device when a storage water heater's supply passes through a check valve, PRV or backflow preventer.
  • The average household's leaks waste more than 9,300 gallons a year; 9 percent of homes leak 50 or more gallons a day (EPA WaterSense).
  • EPA advises checking and replacing toilet flappers at least every five years; InterNACHI estimates tank components last about five years.
  • Texas Occupations Code 1301.551 lets cities skip permits for replacing ballcocks and water control valves.
  • Houston and Austin use the Uniform Plumbing Code; Dallas and San Antonio use the International Plumbing Code family.

Match the noise to the cause

Pipes make a handful of distinct sounds, and each points to a different problem. Start by naming the sound and noticing when it happens.

SoundWhen it happensMost likely causeFirst thing to check
Loud bang or thudRight after a faucet, washer or dishwasher valve shutsWater hammerHouse water pressure; arrestors at the washer and dishwasher
Rapid knocking or rattlingWhile the washer or dishwasher is fillingLoose pipes plus water hammer from fast solenoid valvesPipe straps near the laundry box; arrestors
Foghorn, honk or moanAfter a flush, while the tank refillsWorn toilet fill valve or loose washer in itReplace the fill valve
Whistle or squealWhen a fixture is openPartly closed or worn valve, undersized pipe, or high pressureOpen shutoff valves fully; test pressure
Hum or vibrationSteady, often whole-houseHigh pressure, a failing pressure regulator, or a well pumpPressure gauge reading
Ticking or creakingAs hot water starts or stopsPipes expanding and contracting against framingHot lines rubbing on wood or tight straps
Hiss or trickleAt night when nothing is onRunning toilet or a hidden leakToilet dye test; water meter test
GurglingFrom drains after water runsPartial clog or venting problemSee our drain guides

The rest of this guide takes each sound in turn, with the fixes in order from free to professional.

What is water hammer, and is it dangerous?

Water hammer is a pressure shock. Water moving through a pipe has momentum. When a valve slams shut, that moving column of water stops all at once, and the energy has nowhere to go. It bounces back through the pipe as a pressure wave, which you hear as a bang and may feel as a shudder in the wall.

It is not an emergency, but it is not harmless either. Repeated shocks can loosen pipe straps and fittings, stress solder and crimp joints, and wear out valves inside washing machines, dishwashers, ice makers and water heaters. A leak inside a wall from a fatigued joint is the real risk. Insurers in Texas often exclude damage from leaks that continue over time, so a joint that weeps slowly for weeks can become a denied claim. See plumbing insurance coverage.

The plumbing code treats water hammer as a design issue. The Florida Building Code, Plumbing (2023), section 604.9, says flow velocity must be controlled to reduce water hammer, and that a water-hammer arrestor shall be installed where quick-closing valves are utilized. Arrestors must conform to the ASSE 1010 standard and be installed per the manufacturer's instructions. Texas cities adopt either the International Plumbing Code, which the Florida code is based on, or the Uniform Plumbing Code: Dallas and San Antonio use the IPC family, while Houston and Austin use the UPC. Ask your local permit office which edition and amendments apply.

Quick-closing valves are the usual triggers: the electric solenoid valves in clothes washers, dishwashers, refrigerator ice makers and irrigation systems, plus single-handle faucets that can be slapped shut.

Why do my pipes bang when I turn off the water?

Three things make water hammer worse. Work through them in order.

1. High water pressure

The faster and harder water moves, the bigger the shock when it stops. The code sets the ceiling: under FBC Plumbing 604.8, where static water pressure in a building exceeds 80 psi, an approved pressure-reducing valve (PRV) must bring it down to 80 psi or less. The valve must meet ASSE 1003 or CSA B356 and include a strainer.

Test it yourself. Screw an inexpensive pressure gauge onto an outdoor hose bib or the washer's cold connection, with no water running in the house. If it reads above 80 psi, the PRV is missing, set too high, or failing. A PRV that has failed often lets pressure creep up overnight, so check once in the morning and once in the evening. See our full water pressure guide.

2. Missing or worn-out arrestors

A water hammer arrestor is a short sealed cylinder with an air cushion or spring behind a piston. When the shock wave arrives, the piston compresses the cushion and absorbs it. Older homes used "air chambers": capped vertical pipe stubs behind fixtures that held a pocket of air. Over time that air dissolves into the water, the chamber fills, and the banging returns. Modern piston arrestors are sealed so the cushion does not waterlog.

3. Loose pipes

A pipe that is not firmly supported will slam against framing when the shock hits, turning a small pulse into a loud bang. Strap and isolate the pipe and the noise often drops sharply even before you add arrestors.

How do I get rid of water hammer? Fixes from free to professional

  1. Drain the system to recharge old air chambers. If your home has air chambers, shut off the main valve, open the highest and lowest faucets in the house, and let all the water drain out. Close the faucets, turn the main back on slowly, and bleed air at each fixture. This refills the chambers with air. It may last weeks or months.
  2. Close fixtures gently. Simple, but a single-lever kitchen faucet snapped shut can bang every time.
  3. Check and lower the pressure. If your gauge reads over 80 psi, adjust or replace the PRV. Most sit near the main shutoff where the line enters the house. Many installers aim lower than the 80 psi ceiling for comfort and less wear.
  4. Secure loose pipes. Add straps or clamps where you can reach the pipe: in the attic, garage, under sinks and at the washer box. Use plastic-lined or cushioned straps so the pipe can expand without rubbing.
  5. Add screw-on arrestors at the washer. Small arrestors thread onto the hot and cold washer valves, and the hoses connect to them. This is a common homeowner fix because the washer is the most common source of hammer.
  6. Add arrestors at the dishwasher and ice maker. These usually go under the sink on the supply line to the appliance.
  7. Have a plumber install in-wall arrestors during a remodel or repipe, sized for the fixtures they serve.

Where should an arrestor go?

As close as practical to the quick-closing valve that causes the shock, on the supply line feeding it. The code requires following the manufacturer's instructions, and those instructions set orientation and sizing. In practice that means one on the hot and one on the cold at the washer, one on the dishwasher supply, one at the ice maker line if it bangs, and on long straight runs serving several fixtures. An arrestor far from the valve does little.

Check the box for ASSE 1010 certification, the standard named in the plumbing code.

Can high water pressure cause water hammer? And what about thermal expansion?

Yes. High pressure is the single biggest amplifier of water hammer, and a failing PRV is a common reason a quiet house starts banging. It also links to a second, sneakier problem: thermal expansion.

When a tank water heater heats water, the water expands. In an older open system, that extra volume pushed back into the city main. But a PRV, a check valve or a backflow preventer stops water from flowing back, so the extra volume has nowhere to go and pressure rises inside the house each time the heater runs. That can make pipes knock, cause the heater's relief valve to drip, and stress fittings.

The code addresses this too. FBC Plumbing 607.3 says that when a storage water heater's cold supply passes through a check valve, PRV or backflow preventer, a thermal expansion control device (usually an expansion tank) must be connected to the heater's cold supply line, downstream of those devices, and sized so system pressure stays within the 80 psi limit of 604.8.

Signs of a thermal expansion problem: pressure on your gauge is fine in the morning but much higher after hot water use; the relief valve drips; or you hear knocking a while after a shower, when nothing is running. Ask a plumber to check the expansion tank's air charge, which should match the house pressure. See water heater maintenance.

Why do my pipes rattle when the washing machine fills?

Washing machines use solenoid valves that open and close in a fraction of a second, several times in a cycle. Each close sends a shock down the line. If the supply pipes behind the washer box are loose, they rattle against the studs.

Fixes: install screw-on arrestors on both washer valves; secure the pipes behind and above the laundry box; and check house pressure. While you are there, look at the washer hoses. Rubber hoses that bulge, crack or are more than a few years old are a common burst point. Braided stainless hoses are a cheap upgrade. Florida's Citizens 4-point inspection form asks inspectors to rate the condition of the washing machine connection, along with the dishwasher, refrigerator and water heater connections. See under-sink and appliance leaks.

Why does my toilet make a foghorn noise?

A honking, moaning or foghorn sound during the refill after a flush almost always comes from the fill valve (the tall valve on the left inside the tank, sometimes called a ballcock). A worn washer or diaphragm vibrates as water rushes past it, and the vibration resonates through the pipes, so it can sound like it is coming from somewhere else in the house.

To confirm: lift the tank lid and flush. If the noise starts as the tank fills and stops when it is full, it is the fill valve. Turning the supply stop under the toilet partly closed can quiet it briefly but is not a fix. Replacing the fill valve is a common DIY repair and the parts are inexpensive.

Permits: Texas law lets cities skip permits for replacing ballcocks and water control valves, among other small repairs (Occupations Code 1301.551). In Miami-Dade, licensed plumbing contractors may repair or replace faucets and toilet fixtures without a permit under the county's exemption list. Check your city if unsure. See running toilets and toilet problems.

Replace the flapper at the same time if it is old. EPA WaterSense advises checking and replacing toilet flappers at least every five years, and InterNACHI estimates toilet tank components last about five years.

Why do my pipes make noise at night when no one is using water?

Treat this as a leak until proven otherwise. A hiss, trickle or the toilet briefly refilling on its own in the middle of the night (a "phantom flush") means water is moving when nothing should be on. The most common cause is a toilet flapper leaking into the bowl. Hidden leaks under a slab or in a wall are the more serious possibility.

Two free tests

  1. Toilet dye test. Put a few drops of food coloring in each toilet tank. Do not flush for 10 to 15 minutes. If color appears in the bowl, the flapper leaks.
  2. Meter test. Turn off every faucet and water-using appliance. Read the water meter, including the small leak indicator dial or triangle. Wait an hour or two without using water. If the reading changed or the indicator spins, water is leaking somewhere.

These leaks add up. EPA says the average household's leaks waste more than 9,300 gallons a year, and about 9 percent of homes have leaks that waste 50 or more gallons a day. If the meter moves and the toilets pass, call a plumber for leak detection, especially in a slab home. See leak detection, slab leaks and high water bills.

Other night noises with innocent causes: an ice maker cycling, an irrigation timer, a water softener regenerating (softeners often run in the early morning), and pipes ticking as they cool after the water heater stops.

Why do pipes whistle or hum?

Whistling means water is being forced through a narrow opening. Common sources: a shutoff valve that is only partly open (open the fixture's stop valve fully and see if it stops); a worn washer or cartridge in a faucet; a mineral-clogged aerator or showerhead; or a PRV that is failing. Galvanized pipes narrowed by internal rust can whistle too. See galvanized pipe and dripping faucets and fixtures.

Humming is a steady vibration, often heard through the whole house. Usual causes: water pressure that is too high; a PRV that chatters; or, in homes on a private well, the pump or pressure tank. A hum that starts and stops with the well pump points to the pump, its pressure switch or a waterlogged pressure tank. See well water.

If pressure is the issue, the gauge test tells you fast. Normal residential pressure sits well below the 80 psi code ceiling.

Can PEX be noisy? Ticking and creaking pipes

PEX is generally quieter than copper for water hammer, because the flexible plastic absorbs part of the shock. But it is not silent. PEX expands and contracts more than metal with temperature changes, so hot lines can tick or creak as they slide against straps and framing when hot water starts or stops. A long run pulled tight with no room to move will be noisier.

Copper and CPVC tick the same way when they rub on wood. The fix is the same: use proper hangers or plastic-lined straps that hold the pipe but let it slide, add sleeves where pipes pass through studs or joists, and leave a little slack in long PEX runs. Note that rigid pipe joined to PEX can still transmit water hammer from appliances, so arrestors still matter.

In Texas and Florida attics, supply lines can see big swings between a cool morning and a hot afternoon, which makes ticking more noticeable. That is normal movement, not a defect, as long as the pipes are supported and not rubbing through. If you are re-piping, see PEX vs copper vs CPVC.

How much does it cost to fix noisy pipes?

We did not find a named, dated cost study for water hammer repairs, so we are not giving a dollar range. What we can say from the work involved:

  • Free: draining the system to recharge air chambers, opening shutoff valves fully, closing fixtures gently, and the dye and meter leak tests.
  • Low parts cost, DIY: a pressure gauge, screw-on washer arrestors, pipe straps, a toilet fill valve or flapper.
  • Typical service call: PRV adjustment or replacement, an expansion tank, or under-sink arrestors.
  • Larger jobs: opening walls to add arrestors or re-strap pipes, or fixing a leak found by the meter test. Wall and ceiling repair is often a separate trade, as repipe cost guides note.

Get a written quote that names the cause the plumber found, the parts and the pressure reading before and after. A PRV replacement or water heater expansion tank may need a permit depending on your city. See plumbing costs in Texas and Florida and how to hire a plumber.

When to call a plumber

  • Pressure reads above 80 psi and you cannot adjust the PRV, or the PRV is corroded.
  • The banging started suddenly and is getting worse.
  • The water meter moves when everything is off.
  • You see damp drywall, stains, or warm spots on the floor near a noisy pipe.
  • The water heater relief valve drips or the expansion tank is missing on a system with a PRV.
  • Noises come from a pipe you cannot reach without opening a wall.

Licensed plumbers: in Texas, check a license with the Texas State Board of Plumbing Examiners; in Florida, with the Department of Business and Professional Regulation. See Texas plumbing licenses and Florida plumbing licenses.

How to choose a provider

  • Name the noise and note exactly when it happens.
  • Screw a pressure gauge onto a hose bib and read it morning and evening.
  • If pressure is over 80 psi, have the PRV adjusted or replaced.
  • Check for an expansion tank on the water heater if you have a PRV or check valve.
  • Drain and refill the system to recharge old air chambers.
  • Open every fixture shutoff valve fully.
  • Strap loose pipes at the laundry box, under sinks and in the attic.
  • Install ASSE 1010 arrestors on the washer valves and dishwasher supply.
  • Replace a honking toilet fill valve and any flapper older than five years.
  • Do the toilet dye test and a two-hour water meter test for night noises.
  • Call a licensed plumber if the meter moves or you see damp walls.

Related plumbing guides

Plumbing by state and city

Questions people ask

How do I install a water hammer arrestor on a washing machine?

Turn off both washer valves and unscrew the hoses. Wrap the valve threads with thread seal tape if the arrestor's instructions call for it, then screw an arrestor onto each valve by hand and snug it with pliers. Reattach the hoses to the arrestors, open the valves slowly and check for drips. Buy arrestors certified to ASSE 1010, the standard the plumbing code names.

Will water hammer go away on its own?

Rarely. Old air chambers keep waterlogging, and a PRV that is failing gets worse. The noise may come and go with pressure changes in the city main, but the cause stays. Test pressure, recharge any air chambers, secure pipes and add arrestors at the appliances that trigger it.

Does water hammer damage appliances?

It can. Repeated shocks wear the solenoid valves in washers, dishwashers and ice makers and stress the connections behind them. A failed supply hose or valve is a common source of sudden water damage. That is one reason the code requires arrestors where quick-closing valves are used.

Why did my pipes start banging after the city worked on the water main?

Work on the main can raise or change pressure, push air into the lines, or stir up sediment that lodges in your PRV strainer or valves. Run cold water at several faucets to purge air, then check pressure with a gauge. If it reads over 80 psi or the PRV strainer is clogged, have the PRV serviced. Call the utility if pressure stays unusually high.

Why do my pipes bang only when I use hot water?

Two common reasons: thermal expansion, when a water heater on a closed system raises house pressure, and hot lines expanding against tight straps. Check whether you have an expansion tank on the water heater cold line, and whether pressure rises after hot water use. A plumber can check the tank's air charge.

Is it safe to ignore a toilet that honks after flushing?

It is not dangerous, but fix it soon. The foghorn sound means the fill valve is wearing, and a failing fill valve can stick open and run constantly, wasting water and raising your bill. Replacing it is a simple repair, and in Texas replacing a ballcock does not require a city permit.

Can a water softener make pipes noisy?

A softener regenerating, often overnight, can make running-water and valve sounds near the unit, which is normal. A softener with a clogged resin bed or bypass problem can also restrict flow and cause whistling. If noise lines up with the regeneration schedule, it is likely the softener. See our hard water and softener guide.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration