New ebook: Before You Borrow, how lenders decide and how to get your business loan approved. Get it for $7.99 →
New ebookHow to Research Like a Wall Street AnalystFind original sources, analyze trends, build your own insightsGet it now →
Markets
Real businesses. Bigger perspective. · Fri, Nov 20, 2026News. Tools. Scores. Games. Free.The Morning Chronicle
Donate BTCOpen dDashboard

Local Guide · Electricians

Why Is My Electric Bill So High? Electrical Causes, Meter Tests and What an Electrician Can Check in Texas and Florida

How to tell whether a bill spike is weather, a failing appliance, a wiring fault or a meter problem, and how to use your legal right to a meter test under PUCT and Florida PSC rules.

Most sudden bill jumps in Texas and Florida come from air conditioning or heat running longer, a failing appliance such as a water heater or pool pump, or a rate or billing change. Check your interval usage data, shut off breakers one at a time to find the load, and if the numbers still do not add up, ask for a meter test: Texas utilities test free on request (PUCT 25.124) and Florida regulated utilities test free once every 12 months (Rule 25-6.059).

Key facts

  • Texas electric utilities must test a customer's meter on request at no charge; if the customer asks again within four years and the meter is accurate, the utility may charge a tariff fee (PUCT Rule 25.124(c)).
  • After a requested test, a Texas utility must tell the customer the removal date, test date, result and who did the test (PUCT 25.124(c)(3)).
  • Florida regulated utilities must test a meter free on request if it has not been tested in the prior 12 months; more frequent tests can require a deposit of up to $100, refunded if the meter runs fast beyond limits (Rule 25-6.059).
  • Florida customers may witness the test, get a written report, use an independent testing facility at their own cost, or ask the Florida PSC for a refereed test witnessed by Commission staff (Rules 25-6.059 and 25-6.060).
  • Oncor says Smart Meter Texas stores daily, monthly and 15-minute interval usage from advanced meters, and estimated readings during long outages are corrected once actual reads are available.
  • Federal rules require dedicated-purpose pool pumps manufactured starting July 19, 2021 to meet minimum weighted energy factor (WEF) scores, and certain filter pool pumps must ship with a timer (10 CFR 431.465).
  • FPL offers a free Home Energy Survey (1-800-342-5375); Tampa Electric offers free in-home or online energy audits; CPS Energy lists a Home Energy Assessment Program and a pool pump rebate.
  • FPL's online appliance calculator uses an example electric cost of $0.12 per kWh; your real rate is on your bill.

First, figure out what kind of high bill you have

A high bill is a symptom, not a diagnosis. Before you call an electrician, sort the problem into one of four buckets. Each has a different fix and a different person to call.

PatternMost likely causeWho to call
Usage (kWh) up, and the weather was hotter or colder than last monthAC or heating running longerUsually no one; consider an HVAC tune-up or energy audit
Usage up sharply, weather similarA failing or stuck appliance: water heater, AC, pool pump, well pump, heat strips, freezerHVAC tech, plumber or electrician depending on the appliance
Usage normal, dollars upRate change, plan expiration, fees or a billing errorYour retail electric provider (Texas competitive areas) or your utility
Usage high even with most breakers off, or reads that do not match your own meterHidden load, wiring fault, crossed meters or meter errorElectrician first, then the utility for a meter test

Look at the kWh number on the bill, not just the dollar total. Compare it with the same month last year. A 30 percent jump in kWh during a normal month is worth chasing. A dollar jump with flat kWh is a pricing question, not an electrical one.

Why bills spike in Texas and Florida summers

In both states, cooling is the big driver. Your AC compressor and fan may draw several kilowatts while running. The math is simple: watts times hours equals energy. A system that draws 3.5 kilowatts and runs 10 hours a day uses about 35 kWh a day, or roughly 1,050 kWh a month. If a heat wave pushes runtime to 16 hours, the same system uses about 1,680 kWh. Nothing is broken, but the bill grows by more than half.

Things that make the AC run longer than it should:

  • Dirty filters, clogged outdoor coils or low refrigerant (HVAC issues).
  • A failing capacitor or contactor that makes the unit struggle or short-cycle. A capacitor problem is an HVAC repair in Florida and Texas, though the electrical connection rules are covered in who can legally do what.
  • Leaky ducts in a hot attic, common in Houston, Tampa and Orlando homes.
  • A thermostat set lower than usual, or a smart thermostat schedule that was reset.

In winter, heat pumps in both states switch on electric strip heat when it is very cold or when the system is in "emergency heat." Strip heat is one of the biggest loads in a home. FPL's appliance calculator lists central strip heat separately for that reason. If your bill doubled in a January cold snap, check whether the thermostat was left on emergency heat.

Texas readers will remember February 2021, when Winter Storm Uri forced ERCOT to shed up to 20,000 MW of load. Extreme cold drives both usage and grid stress. For outages, see ERCOT grid outages.

What uses the most electricity in a house?

Rankings vary by home, but the largest loads are almost always the ones that heat, cool or pump. Here is a practical list of where to look, roughly in the order they surprise people.

LoadWhy it can spikeQuick check
Central AC and heat pumpLong runtimes, low refrigerant, strip heatWatch the outdoor unit; check thermostat mode
Electric water heaterFailed thermostat or element, a hot water leak, or a shorted element leaking currentIs water too hot? Is there a leak? Does the heater run constantly?
Pool pump and heaterSingle-speed pumps running all day, heat pump pool heatersCheck the timer and run hours
Well pumpA leak or failed pressure switch makes it cycleListen for the pump running when no tap is open
Second refrigerator or freezer in a garageHot garage, worn door sealsFeel for warm seals; check if it runs nonstop
Dehumidifier, space heatersLeft on for weeksWalk the house
Electric dryer and rangeLarge but usually predictableCompare with laundry habits
EV chargingNew EV, or a charger set to charge at full power dailyCheck the car's charging log

FPL's online appliance calculator lets you estimate monthly cost for items like a ceiling fan, strip heat, dryer, dehumidifier, oxygen concentrator, room AC and space heater, using an example rate of $0.12 per kWh. Substitute your own rate from your bill.

Phantom loads: real, but rarely the whole story

"Phantom" or standby loads are devices that draw power when you think they are off: cable and satellite boxes, game consoles in instant-on mode, computers, chargers, smart speakers, and appliances with clocks and displays. They run 24 hours a day, every day, so they add up over a year.

Phantom loads usually explain a steady, slightly higher base use, not a sudden jump. If your bill doubled in one month, standby power is not the cause. Look for a big load that changed.

How to measure your own base load:

  1. Open your interval data (see the next section) and find the lowest hour, usually between 2 and 5 a.m.
  2. That number is your base load: everything that runs all the time.
  3. Unplug or switch off groups of devices for a night and compare.

Smart power strips and turning off entertainment centers at the strip are simple, safe ways to trim standby use. No electrician is needed.

Use your smart meter data before you call anyone

Most homes in both states now have advanced (smart) meters that record usage in short intervals.

  • Texas competitive areas (Oncor, CenterPoint, AEP Texas, TNMP service areas): Oncor says Smart Meter Texas stores your daily, monthly and 15-minute interval data and gives you secure access. Your retail electric provider (REP) bills you, but the wires company owns and reads the meter.
  • Austin Energy and CPS Energy customers use their utility's own online account tools.
  • Florida utilities such as FPL provide online usage tools; FPL's Energy Manager includes an energy dashboard, analyzer and appliance calculators.

What to look for:

  • A new block of usage at the same time every day: a timer, pool pump, irrigation pump or EV.
  • A higher overnight floor than last month: something now runs constantly, like a water heater with a leak or a stuck relay.
  • Big spikes on cold mornings: heat strips.
  • Usage during a power outage: Oncor explains that if the monthly read falls during an extended outage, the billing read may be estimated from past use, then corrected once the real read is available, and your REP may rebill.

The breaker test: find the hidden load yourself (safely)

You can often find a runaway load without opening anything. You only need to flip breakers and watch the meter or the app.

  1. Turn off major appliances. Note the reading on your meter or the live use shown in your app.
  2. At the panel, switch off one labeled breaker at a time. Wait a minute and see if use drops.
  3. A large drop on a breaker you thought was idle points to the problem, for example the water heater breaker.
  4. Turn the main breaker off briefly. With the main off, the house should use nothing. If your meter still shows use with the main off, call the utility, because something is connected on the line side of your panel or the meter needs checking.
  5. Turn everything back on and reset clocks.

Do not remove the panel cover, pull the meter or touch the meter base. The meter seal belongs to the utility, and the parts on the line side stay energized even with the main off. If a breaker is hot, buzzing or smells burned, stop and read burning smell from outlets or the panel.

Can bad wiring or a ground fault raise my bill?

Ordinary bad wiring, such as a loose outlet connection, causes heat, flicker and fire risk, but it does not use much energy. It is dangerous, not expensive. See flickering and dimming lights.

A ground fault can raise your bill in one situation: when current is leaking from a hot wire through a damaged appliance or cable to ground, on your side of the meter, and the breaker does not trip. The meter counts that current. Common examples:

  • A water heater element with cracked sheathing that leaks current into the tank and pipes. This can also make metal pipes or the tub feel tingly. See shocks and tingles.
  • A buried cable to a shed, gate or well pump with damaged insulation in wet soil.
  • A pool or well pump motor with failing windings.

An electrician can test these with a clamp meter and insulation resistance tester. Any shock or tingle is a safety issue first, and a bill issue second. Shut off the circuit and call.

Other electrical causes an electrician can check:

  • Crossed meters or shared wiring in duplexes, apartments and older houses where a circuit from one unit feeds another.
  • A neighbor or tenant connected to your service through an old outdoor outlet or shared garage circuit.
  • A lost neutral or poor service connection causing equipment to run inefficiently, usually with flicker or appliance damage as the bigger warning signs.

Can a faulty meter cause high bills?

It can, but it is less common than people expect. Meters are tested before installation and on schedules set by national standards. Texas Rule 25.124 says no permanently installed meter may go into service unless its accuracy is established, and test periods follow ANSI Standard C12. Florida's rules require tests to be retained on record (Rule 25-6.022, referenced in 25-6.059).

A meter test makes sense when:

  • Your interval data shows use at times when the house was empty and breakers were off.
  • The meter number on your bill does not match the meter on your wall. Check this first; it is the easiest way to catch crossed meters.
  • The utility recently replaced the meter and your use jumped right after.

Before you request a test, write down the meter number from the wall, take a photo of the display, and gather 12 months of bills.

How to request a meter test in Texas

PUCT Substantive Rule 25.124(c) gives you these rights with an electric utility:

  • On request, the utility must test your meter's accuracy at no charge.
  • The test happens during normal working hours and must be scheduled to accommodate you if you want to watch. It should be done at your home but can, at the utility's choice, be done at its lab.
  • If you ask for another test within four years and the meter tests within ANSI accuracy standards, the utility may charge the fee in its approved tariff.
  • Afterward, the utility must promptly tell you the date the meter was removed, the test date, the result and who did the test.

How to start it depends on where you live:

  1. Competitive areas (most of Houston, Dallas-Fort Worth and many other areas): your bill comes from a REP, but the meter belongs to the transmission and distribution utility (TDU), such as Oncor or CenterPoint. Call your REP and ask for a meter test request, or ask the TDU how it accepts requests.
  2. Austin Energy and CPS Energy are city-owned utilities. Call them directly and ask for their meter test policy, since city utilities set many of their own customer rules.
  3. Billing disputes with a REP that you cannot resolve can be taken to the Public Utility Commission of Texas. For deceptive practices, the Texas Attorney General also takes consumer complaints online.

How to request a meter test in Florida

Florida PSC Rule 25-6.059 covers investor-owned utilities the PSC regulates, such as FPL, Duke Energy Florida and Tampa Electric:

  • On request, the utility must test your meter free if it has not been tested by the utility or the Commission in the previous 12 months. It may be a shop test.
  • If you ask more often, the utility may require a deposit of up to $100 per test. If the meter runs fast beyond the allowed limit, you get the deposit back. If not, the utility may keep it.
  • You or your representative may witness the test, and you can get a written report of the results on request.
  • You may ask for a test at an independent meter testing facility of your choice. You pay that facility and the utility's related costs, which the utility must estimate in advance. If the meter is fast beyond limits, the utility refunds what it collected.
  • If tests conflict, the Commission resolves it.

Rule 25-6.060 adds a refereed test: in a dispute, you can ask the Florida Public Service Commission to have the utility test your meter with a Commission representative supervising and witnessing. Once the utility knows you applied, the meter may not be disturbed without the Commission or your written permission, and the Commission reports the result to you.

Municipal utilities such as JEA in Jacksonville and electric cooperatives set many of their own policies. Ask them for their meter test procedure in writing.

Pool pumps: one of Florida's biggest hidden loads

A single-speed pool pump running many hours a day can be one of the largest loads in a Florida or Texas home. Federal efficiency standards changed the market in 2021. Under 10 CFR 431.465, dedicated-purpose pool pumps manufactured starting July 19, 2021 must meet minimum weighted energy factor (WEF) scores that vary by pump type and size. Integral cartridge and sand filter pool pumps made from that date must ship with a timer, and pumps with freeze protection must ship with conservative default settings or with freeze protection disabled.

What this means for you:

  • An older single-speed pump may use far more energy than a newer, more efficient model running at lower speed for longer.
  • A broken timer or a freeze-protection setting that runs the pump on cool nights can quietly add hours of runtime.
  • Utilities sometimes offer rebates. CPS Energy in San Antonio lists a Home Energy Rebate for pool pumps.

Replacing a pool pump motor or adding a variable-speed pump involves electrical connections and bonding. In Texas, a residential appliance installer can connect a pool-related device to an existing circuit, but new circuits need an electrician. In Florida, use a licensed electrical contractor for the wiring. See pool and spa bonding.

Do energy monitors like Sense or Emporia work?

Whole-home energy monitors use current sensors (clamps) placed around the main service conductors, and sometimes individual circuits, inside your panel. An app shows live use and history. They are useful for:

  • Seeing your live load as you flip breakers, which makes the breaker test above much faster.
  • Spotting large appliances that turn on at odd times.
  • Measuring circuit-level use when you add sensors to specific breakers.

Limits to know: device-detection features that try to identify appliances by their electrical signature can be hit or miss, and small loads often show up only as "other." Circuit-level sensors give more reliable answers than signature detection.

Installation means working inside an energized panel near the main lugs, which stay live even with the main breaker off. In Texas, a homeowner may do work on the home they own and live in where no city ordinance regulates it, but many cities require permits for panel work. In Florida, homeowners may act as their own electrical contractor on their single-family home under s. 489.503(6). For most people, having an electrician install the sensors during another service call is the safe choice.

Free and low-cost help from your utility

Utilities in both states offer audits and rebates. Programs change often, so confirm details with your utility.

UtilityWhat it offers (as published)
FPLFree onsite Home Energy Survey by an FPL Energy Expert; call 1-800-DIAL-FPL (1-800-342-5375). Online Energy Manager tools.
Tampa ElectricFree in-home or online Energy Audit that identifies savings and qualifies you for rebates.
CPS Energy (San Antonio)Home Energy Assessment Program, rebates for central AC, heat pumps, window units, pool pumps and attic insulation, plus Casa Verde weatherization.
Oncor and other Texas TDUsSmart Meter Texas interval data; efficiency programs are often offered through REPs and TDUs.
Austin Energy, Duke Energy Florida, JEACheck each utility's efficiency pages for current audits and rebates.

Ask the auditor to note any electrical concerns they see, such as a warm panel or an old water heater, so an electrician can follow up.

What an electrician can check, and what it costs

An electrician is the right call when you have ruled out weather, rates and obvious appliance failures. A typical diagnostic visit can include:

  • Clamp-meter readings on each circuit to find the load that does not belong.
  • Testing water heater elements and buried feeders for leakage to ground.
  • Checking for crossed or shared circuits between units.
  • Looking at the service connections, panel and grounding for loose or overheated parts.
  • Installing a permanent energy monitor if you want ongoing data.

We found no dated, published study of the cost of an electrical diagnostic call in Texas or Florida. Ask for the trip and hourly rate up front. For broader pricing context from named studies, see our electrician cost guide. If the problem turns out to be an undersized or failing panel, the Lawrence Berkeley National Laboratory's August 2026 contractor survey found a median main panel replacement cost of $3,500 nationally.

If a high bill comes with heat, buzzing, a burning smell or shocks, treat it as a safety problem today. Read when an electrical problem is an emergency.

How to choose a provider

  • Compare kWh, not dollars, with the same month last year.
  • Check weather, thermostat mode and whether emergency heat was on.
  • Open your smart meter interval data and find the overnight base load.
  • Walk the house for space heaters, dehumidifiers and garage freezers.
  • Check pool pump, well pump and water heater runtimes.
  • Do the breaker test and note which breaker drops your use.
  • Match the meter number on your bill to the meter on your wall.
  • Book a free utility energy survey or audit if offered.
  • Call an electrician for leakage tests, shared circuits or panel concerns.
  • Request a meter test in writing if the data still does not add up.

Related electricians guides

Electricians by state and city

Questions people ask

Why did my electric bill double when nothing changed?

Something usually did change: hotter weather, a thermostat schedule, emergency heat, a failing water heater or pool pump, a new EV, or a rate or plan change. Compare kWh with last year, review your interval data and do the breaker test. If use is high with breakers off or the meter number does not match, call the utility.

Can a bad outlet make my bill go up?

Not by much. A loose or damaged outlet wastes very little energy, but it can overheat and start a fire. Treat warm, discolored or buzzing outlets as a safety repair. The exceptions that raise bills are current leaks through damaged appliances or buried cables to ground.

Is a meter test really free in Texas?

Yes, the first requested test is free under PUCT Rule 25.124. If you ask for another within four years and the meter is accurate, the utility may charge the tariff fee. City-owned utilities like Austin Energy and CPS Energy set their own policies, so ask them.

How often can I get a free meter test in Florida?

For PSC-regulated utilities, once every 12 months for free under Rule 25-6.059. More frequent tests may require a deposit of up to $100, refunded if the meter runs fast beyond limits. You can also ask the PSC for a refereed test in a dispute.

Does unplugging chargers and TVs really save money?

It trims your base load a little. Standby devices run around the clock, so cutting them helps over a year, but they rarely explain a sudden spike. Focus first on heating, cooling, water heating and pumps. Your overnight base load in the interval data shows how much standby use you have.

Why was my bill high after a power outage in Texas?

During a long outage, Oncor says the billing read may be estimated from your past use. After power returns, the actual read goes to Smart Meter Texas and your REP, which may rebill. Check whether your bill says estimated and ask your REP to rebill from actual data.

Will an electrician find why my bill is high?

An electrician can find electrical causes: leaking elements, damaged buried cables, shared circuits and failing equipment. Many high bills turn out to be HVAC or appliance problems, so start with the breaker test to point the electrician to the right circuit.

Can I install an energy monitor myself?

Plug-in monitors and utility apps need no wiring. Whole-home monitors install inside the panel near live main conductors. Texas owner-occupants and Florida owner-builders may do their own work where local rules allow, but this is a job most people should leave to an electrician.

Sources

This guide was written by our editorial team from the public sources listed above. It is general information, not legal advice; confirm licensing and terms directly with any provider.

New ebook from The Company ChronicleHow to Research Like a Wall Street AnalystFind original sources, analyze trends, and build your own insights. 36 pages with worksheets.Get the ebook · $29Instant PDF download

Business Spotlight

Want us to publish your business?

Our team writes and publishes articles about your business on The Company Chronicle every month, with a link to your website. Plans from $30 a month, cancel anytime.

Publish with us

The Chronicle directory

What are you into?

The Chronicle, coast to coast

Every corner has a story.

The full Chronicle illustration